16 Test Equipment and Accessories / 7PA

7PA26/27/30
Auxiliary Relays for Various Applications
Technical data for 7PA26 and 7PA27
Switching contacts
Continuous current 10 A
Overload capability 80 A/200 ms
150 A/10 ms
Switching current/voltage 40 A/0.5 s/110 V DC

LSP2888.tif
LSP2887.tif
Breaking capacity for 105 operating cycles
Non-inductive Inductive, 20 ms
1 contact 2 contacts 1 contact 2 contacts
in series in series
V DC A A A A
24 6.6 12.7 3.2 6.0
60 2.6 4.9 1.4 2.7

LSP2890.tif
LSP2889.tif

125 1.2 2.2 0.6 1.1

220 0.6 1.1 0.3 0.6

For details see characteristics

Vmax, open contact 250 V DC/400 V AC
Mechanical service life 107 operating cycles
Operating temperature - 10 C to + 55 C
Fig. 16/5 7PA2 auxiliary relays 14 F to 131 F
Max. permissible humidity 93 % at 40 C/104 F

Description

Due to their quality, reliability and design,

these relays are optimal for applications re-
quiring high reliability and availability
such as power stations, substations, railway
and industrial plants. Typical examples in-
clude petrochemical industry, chemical in-
dustry, cement industry, rolling mills etc.
The relays comply with the IEC, EN, IEEE
standards (type and routine test) and bear
the CE mark.
Technical data for 7PA30
The robust switch contacts are character-
Contacts
ized by high make/break capacity, overload Permanent current 8A
capability and continuous current intensity Instantaneous current 15 A
capacity; thus perfect insulation is obtain- Making capacity 15 A/4 s/110 V DC
ed. Direct control of high-voltage and me- Breaking capacity 0.3 A/110 V DC
dium-voltage switchgear is possible. Umax opened contact 250 V DC/400 V AC
Mechanical life 107 operations
Operating temperature -10 C +55 C
Storage temperature -30 C +70 C
Operating humidity 93 %/40 C

Standards

Electrical test performed acc. to IEC 60255-5

Dielectric test 2 kV / 50 Hz / 1 min
Surge withstand test 5 kV / 1.2 / 50 s
Insulation >100 M / 500 V DC
Inflammability tests UL94: VO
Plastic materials
Degree of protection Relay: IP40
acc. to IEC 60529
Climatic stress test acc. to IEC 60068-2
Dry cold, operation
Dry heat, operation
- 10 C
+ 55 C
16
Storage and transport - 25 C + 70 C

Siemens SIP 2008 16/9

 16 Test Equipment and Accessories / 7PA

Technical data
Constructions standards (Cont'd) 7PA26 Monostable
Rated voltages and consumption
Immunity test EMC fast-acting relay VN Voltage Consumption
EN 60255-22-1 High frequency 1 MHz burst Description range
disturbance test: V DC V DC mA
Test level: 1 MHz, 400 imp/s, 2 s The monostable 7PA26 has eight change-
Common mode: 2,5 kV 7PA26o20
over contacts.
Differential mode: 1 kV 24/30 20 33 278
EN 61000-4-4 Electrical Fast transient burst: 60 48 66 100
Test level 4 kV, 2.5 kHz,
1 min 2 kV, 5 kHz, 1 min 110/125 88 138 55
EN 61000-4-5 Surge 8/20 s (current) 220 176 242 28
1.2/50 s (voltage) Consumption
Common mode: 2 kV- 7PA26o21 Normal Peak
Differential mode: 1 kV
24/30 19 36 50
EN 61000-4-3 Radiated electromagnetic field: 0.8 A 20 ms
Test level: 80-1000 MHz, 60 42 72 20
10 V/m, 80 % AM (1 kHz)
110/125 77 150 14
EN 61000-4-3 Digital telephones radiated 0.3 A 20 ms
electromagnetic field: Test level: 220 154 264 7
900 5 MHz, 10 V/m, 50 %
(200 Hz) 1.89 GHz 10 MHz,
10 V/m, 50 % (200 Hz) Pick-up time: 7PA26o20 < 20 ms
EN 61000-4-6 Conducted disturbances in- 7PA26o21 < 10 ms
duced by radio frequency fields.
Test level: 0.15-80 MHz, 10 V, Drop-out time: < 40 ms
80 % AM (1kHz)
General description see page 16/5.
EN 61000-4-2 Electrostatic discharges: Test
level: Contact 15 kV; Refer to part 17 for dimension drawings.
Air mode 15 kV
EN 61000-4-8 Power frequency magnetic field:
Fig. 16/6 Connection diagram
Test level: 100 A/m
1 min 1000 A/m 1 s
EN 55011 Emission test: Test level: Cover:
Class A 30-230 MHz, 40 dB(V/m)
(quasi peak)-10 m
230-1000 MHz, 47 dB(V/m)
(quasi peak)-10 m
Power supply:
0.15-0.5 MHz, 79 dB(V)
(quasi peak)/ 66 dB average val.
0.5-5 MHz, 73 dB(V)
(quasi peak)/ 60 dB average val.
5-30 MHz, 73 dB(V)
(quasi peak)/ 60 dB average val.
Selection and ordering data Description Order No.
7PA26 monostable relay with 8 changeover contacts 7PA26o2-oAA00-o
Auxiliary voltage
24 /30 V DC 1
60 V DC 2
110/125 V DC 3
220 V DC 4

Standard, 20 ms 0
Fast, 10 ms 1
Socket
without socket 0
with flush-mounting socket 7XP9010-3 1
with surface-mounting socket 7XP9012-0 2

16 Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9010-3
Surface mounting 7XP9012-0
16/10 Siemens SIP 2008
 16 Test Equipment and Accessories / 7PA

Technical data
7PA27 Monostable
Rated voltages and consumption
fast-acting relay VN Voltage Consumption
Description range Normal Peak
V DC V DC mA
The monostable 7PA27 is a fast-acting
24/30 19 36 28 1 A/20 ms
relay with four changeover contacts.
60 42 72 12 1 A/20 ms
110/125 77 150 8 0,3 A/20 ms
220 154 264 6 0,3 A/20 ms

Pick-up time: < 8 ms

Fig. 16/7 Connection diagram
Drop-out time: < 40 ms
General description see page 16/5.
Refer to part 17 for dimension drawings.

Selection and ordering data Description Order No.

7PA27 monostable fast-acting relay 7PA27o2-0AA00-o
Auxiliary voltage
24 / 30 V DC 1
60 V DC 2
110 / 125 V DC 3
220 V DC 4

Socket
without socket 0
with flush-mounting socket 7XP9011-2 1
with surface-mounting socket 7XP9013-0 2

Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9011-2
Surface mounting 7XP9013-0

16

Siemens SIP 2008 16/11

 16 Test Equipment and Accessories / 7PA

7PA30 Three-phase
Trip circuit supervision
Description
The relay is for supervision of the trip cir-
cuit of a circuit breaker with three selective
trip coils. The trip circuit wiring is super-
vised from the positive supply to the nega-
tive supply whilst the circuit breaker is
open or closed.

Functions
The design, quality and rugged construc-
tion of the relay make it suitable for appli-
cations requiring high levels of reliability/
dependability. The high degree of
protection guarantees reliable operation
over a wide temperature range, even under
extreme environmental conditions.
The relay has been tested in accordance
with IEC, EN and IEEE standards. The re-
lay is CE marked. The supervision current
is always less than 1.4 mA thus avoiding
unwanted operation of the trip coil. Cor-
rect operation is shown via a green LED.
Fig. 16/8 Connection diagram for 3-phase relay

Standard voltages and consumption

VN Voltage range Consumption Impedance Pickup
per phase Drop out Voltage
V DC V DC mA k/s V DC
24/30 18 - 33 35 20 between 12 and 18
60 42 - 66 20 44 36 and 42
110/125 77 - 138 20 94 66 and 77
220 154 - 275 15 200 132 and 154
Drop-out time: between 150 ms and 400 ms

Selection and ordering data Description Order No.

7PA30 trip circuit supervision (three-phase) 7PA30o2-3AA00-o
Auxiliary voltage
24/30 V DC 1
60 V DC 2
110/125 V DC 3
220 V DC 4

Socket
without socket 0
with flush-mounting socket 7XP9010-4 1
with surface-mounting socket 7XP9012-0 2

Accessories Description Order No.

16 Socket as spare part
Flush mounting 7XP9010-4
Surface mounting 7XP9012-0

16/12 Siemens SIP 2008

 16 Test Equipment and Accessories / 7PA

7PA30 Single-phase
Trip circuit supervision
Description
The relay is for supervision of the trip cir-
cuit of a circuit breaker with one trip coil.
The trip circuit wiring is supervised from
the positive supply to the negative supply
whilst the circuit breaker is open or closed.

Functions
The design, quality and rugged construc-
tion of the relay make it suitable for appli-
cations requiring high levels of reliability/
dependability. The high degree of
protection guarantees reliable operation
over a wide temperature range, even under
extreme environmental conditions.
The relay has been tested in accordance
with IEC, EN and IEEE standards. The re-
lay is CE marked. The supervision current Fig. 16/9 Connection diagram for 1-phase relay
is always less than 1.4 mA thus avoiding
unwanted operation of the trip coil. Cor-
rect operation is shown via a green LED. Standard voltages and consumption
VN Voltage range Consumption Impedance Pickup
per phase Drop out Voltage
V DC V DC mA k/s V DC
14/30 18 - 33 32 20 between 12 and 18
60 42 - 66 18 44 36 and 42
110/125 77 - 138 18 94 66 and 77
220 154 - 275 13 200 132 and 154
Drop-out time: between 150 ms and 400 ms

Selection and ordering data Description Order No.

7PA30 trip circuit supervision (single-phase) 7PA30o2-1AA00-o
Auxiliary voltage
24/30 V DC 1
60 V DC 2
110/125 V DC 3
220 V DC 4

Socket
without socket 0
with flush-mounting socket 7XP9011-0 1
with surface-mounting socket 7XP9013-0 2

Accessories Description Order No.

Socket as spare part
Flush mounting 7XP9011-0
Surface mounting 7XP9013-0

16

Siemens SIP 2008 16/13

 16 Test Equipment and Accessories / 7PA

Dimension drawings in mm / inch

Fig. 17/59
7PA27

Fig. 17/61
7TS16, 7PA30 three-phase

Fig. 17/56
7PA23 auxiliary relay +
flush mounting socket 7XP9011-1

Fig. 17/62
Flush mounting socket 7XP9011-2
for 7PA27 auxiliary relay

Fig. 17/63 Fig. 17/64

16 Surface mounting socket 7XP9012 Surface mounting socket 7XP9013
7PA22, 7PA26 auxiliary relays for 7PA23/27 auxiliary relay
7TS16 indication relay 7PA30 single-phase trip circuit supervision
7PA30 three-phase trip circuit supervision

16/14 Siemens SIP 2008

 16 Test Equipment and Accessories / 7PA

Dimension drawings in mm / inch

Fig. 17/65
7PA26

Fig. 17/66
Flush mounting socket 7XP9010-3
for 7PA26 auxiliary relay

16

Siemens SIP 2008 16/15