Incremental encoders

Solid shaft with clamping or synchro flange

Increments per turn 1005000

EIL580 - solid shaft

Features
Precise optical sensing technique with latest
technology
Electric interface TTL and HTL
Clamping or synchro flange
High protection max. IP 67
High resistance to shock and vibrations
Wide range voltage supply 4.75...30 VDC
Increments per turn max. 5000

EIL580 with clamping flange

Technical data - electrical ratings Technical data - mechanical design

Voltage supply 5 VDC 5 % Dimensions (flange) 58mm
8...30 VDC Shaft loading 40N axial
4.75...30 VDC 80N radial
Reverse polarity protection Yes Protection DINEN60529 IP 65 (without shaft seal),
Short-circuit proof Yes (HTL) IP67(withshaftseal)
Yes (TTL, max. 1 s and 1 signal) Operating speed 6000rpm (+20 C, IP 67)
Consumption w/o load 70mA 12000rpm (+20 C, IP 65)
Resolution (steps/turn) 100...5000 Starting torque 0.01Nm (+20 C, IP 65)
Phase shift 90 10 0.02Nm (+20 C, IP 67)
Scan ratio 40...60% Materials Housing: aluminium die-cast
Flange: aluminium die-cast
Reference signal Zero pulse, width 90 10 % Solid shaft: stainless steel
Sensing method Optical Operating temperature -40...+85C
Output frequency 300kHz (TTL) Relative humidity 90 % non-condensing
160kHz (HTL)
Resistance DIN EN 60068-2-6
Output circuit TTL/RS422 Vibration 30g, 10-2000 Hz

Subject to modification in technic and design. Errors and omissions excepted.

HTL/push pull DIN EN 60068-2-27
Interference immunity DIN EN 61000-6-2 Shock 300 g, 6 ms
Emitted interference DIN EN 61000-6-3 Connection Flange connector M12, 8-pin
Approval UL 508 / CSA 22.2 Flange connector M23, 12-pin
Cable
Weight approx. 300g
EIL580 - clamping flange
Shaft type 10 x 20mm, solid shaft with
edge (clamping flange)
EIL580 - synchro flange
Shaft type 6 x 10mm, solid shaft with
edge (synchroflange)
26/11/2012

1 www.baumer.com/motion
 Incremental encoders
Solid shaft with clamping or synchro flange
Increments per turn 1005000

EIL580 - solid shaft

Part number
Clamping flange

EIL580-S C 10 . . . A

Operating temperature
A -40...+85 C

See part number (pulses)

Voltage supply / output circuit

E 5 VDC, TTL/RS422, 6 channel
H 8...30 VDC, TTL/RS422, 6 channel
N 8...30 VDC, HTL/push pull, 6 channel
Q 4.75...30 VDC, HTL/push pull, 6 channel

Connection
R Cable radial, 1 m
L Cable radial, 2 m
F Flange connector M23, 12-pin, radial, pin terminals, ccw
B Flange connector M12, 8-pin, radial, pin terminals, ccw

Protection
5 IP 65
7 IP 67

Specification solid shaft

10 10 x 20 mm, with edge

Flange
C Clamping flange, centering collar 36 mm, M3/M4

Printed in bold = standard items (up to the quantity of 10 will be supplied within 5 working days).

Part number (pulses) Stock items

Subject to modification in technic and design. Errors and omissions excepted.

00100 00300 00720 01250 02500 EIL580-SC10.5FE.01024.A EIL580-SC10.5FE.02048.A
00120 00360 00800 01440 03000 EIL580-SC10.5FN.01024.A EIL580-SC10.5FN.02048.A
00150 00400 00900 01500 03600
Numerous stock items in single quantity will be supplied
00200 00500 01000 01800 04000 within 24 hours respectively one day ex works.
00250 00512 01024 02000 04096
00256 00600 01200 02048 05000
26/11/2012

2 www.baumer.com/motion
Incremental encoders
Solid shaft with clamping or synchro flange
Increments per turn 1005000

EIL580 - solid shaft

Part number
Synchro flange

EIL580-S Y 06 . . . A

Operating temperature
A -40...+85 C

See part number (pulses)

Voltage supply / output circuit

E 5 VDC, TTL/RS422, 6 channel
H 8...30 VDC, TTL/RS422, 6 channel
N 8...30 VDC, HTL/push pull, 6 channel
Q 4.75...30 VDC, HTL/push pull, 6 channel

Connection
R Cable radial, 1 m
L Cable radial, 2 m
F Flange connector M23, 12-pin, radial, pin terminals, ccw
B Flange connector M12, 8-pin, radial, pin terminals, ccw

Protection
5 IP 65
7 IP 67

Specification solid shaft

06 6 x 10 mm, with edge

Flange
Y Synchro flange, synchro flute 52 mm, M3/M4

Printed in bold = standard items (up to the quantity of 10 will be supplied within 5 working days).

Part number (pulses) Stock items

Subject to modification in technic and design. Errors and omissions excepted.

00100 00300 00720 01250 02500 EIL580-SY06.5FE.01024.A EIL580-SY06.5FE.02048.A
00120 00360 00800 01440 03000 EIL580-SY06.5FN.01024.A EIL580-SY06.5FN.02048.A
00150 00400 00900 01500 03600
Numerous stock items in single quantity will be supplied
00200 00500 01000 01800 04000 within 24 hours respectively one day ex works.
00250 00512 01024 02000 04096
00256 00600 01200 02048 05000
26/11/2012

3 www.baumer.com/motion
 Incremental encoders
Solid shaft with clamping or synchro flange
Increments per turn 1005000

EIL580 - solid shaft

Accessories Accessories
Connectors and cables Mounting accessories for EIL580 - synchro flange
10127844 Connector M12, 8-pin, A-coded, straight, 2 m 10141132 Spring washer coupling D1=06 / D2=10
cable 11034139 Spring washer coupling D1=06 / D2=16
10129332 Connector M12, 8-pin, A-coded, straight, 5 m 11050507 Bellows coupling aluminium/stainless steel
cable D1=06 / D2=10
10129333 Connector M12, 8-pin, A-coded, straight, 10 m 10117667 Mounting adaptor for encoders with synchro
cable flange
11053961 Connector M12, 8-pin, A-coded, angular, 2 m 10117668 Set of eccentric fixings for mounting clamp
cable (10117667) with 3x eccentric fixings, screws
11053962 Connector M12, 8-pin, A-coded, angular, 5 m and nuts
cable 11065545 Set of eccentric fixings type A
10170054 Connector M12, 8-pin, A-coded, angular, 10 m
cable For matching measuring wheels please see chapter
accessories, measuring wheels (MR).
10164705 Connector S2BG12, M23, 12-pin
11095302 Connector S2BG12, M23, 12-pin, 1 m cable
11100408 Connector S2BG12, M23, 12-pin, 2 m cable
11100430 Connector S2BG12, M23, 12-pin, 5 m cable
11100431 Connector S2BG12, M23, 12-pin, 10 m cable
Mounting accessories for EIL580 - clamping flange
11065915 Coupling CPS25 L=19 d1=04/d2=10
11065918 Coupling CPS25 L=19 d1=07/d2=10
11065920 Coupling CPS25 L=19 d1=08/d2=10
11065921 Coupling CPS25 L=19 d1=09/d2=10
11065922 Coupling CPS25 L=19 d1=10/d2=06
11065923 Coupling CPS25 L=19 d1=10/d2=10
11065924 Coupling CPS25 L=19 d1=10/d2=11
11065925 Coupling CPS25 L=19 d1=10/d2=12
10141132 Spring washer coupling D1=06 / D2=10
10141133 Spring washer coupling D1=10 / D2=10

Subject to modification in technic and design. Errors and omissions excepted.

11034138 Spring washer coupling D1=10 / D2=16
11034140 Spring washer coupling D1=10 / D2=14
11034141 Spring washer coupling D1=10 / D2=12
11050507 Bellows coupling aluminium/stainless steel
D1=06 / D2=10
11101781 Double loops coupling D1=10 / D2=10
10125051 Mounting adaptor for encoders with clamping
flange
11065545 Set of eccentric fixings type A
11101893 Spring encoder arm
Mounting accessories for EIL580 - synchro flange
11065916 Coupling CPS25 L=19 d1=06/d2=06
11065917 Coupling CPS25 L=19 d1=06/d2=08
11065922 Coupling CPS25 L=19 d1=10/d2=06
11065926 Coupling CPS25 L=19 d1=11/d2=06
11065928 Coupling CPS25 L=19 d1=12/d2=06
10141131 Spring washer coupling D1=06 / D2=06
26/11/2012

4 www.baumer.com/motion
Incremental encoders
Solid shaft with clamping or synchro flange
Increments per turn 1005000

EIL580 - solid shaft

Output signals Terminal assignment

&ORFNZLVHURWDWLQJGLUHFWLRQZKHQORRNLQJDWIODQJH Flange connector M23, 12-pin / cable

Pin Core color Assignment
$ 1 pink Signal B inv.
2
$ 3 blue Signal Z (zero pulse)
4 red Signal Z inv. (zero pulse inv.)
5 green Signal A
% 6 yellow Signal A inv.
7
% 8 grey Signal B
9

=  10 white GND
11
12 brown UB
=
Screen: Connected to housing
Cable data: PVC, 4x2x0.14 mm2, bending radius >32.5 mm
Outer diameter 6.5 mm
Trigger level
Outputs TTL/RS422
1 9 8
Output level High 2.5 V 2 10 12 7

Output level Low 0.5 V 3 6

11
4 5
Load 20 mA

Outputs HTL/Push-pull
Output level High UB -3 V Flange connector M12, 8-pin
Output level Low 1.5 V Pin Assignment
Load 20 mA 1 GND
2 UB
3 Signal A

Subject to modification in technic and design. Errors and omissions excepted.

4 Signal A inv.
5 Signal B
6 Signal B inv.
7 Signal Z (zero pulse)
8 Signal Z inv. (zero pulse inv.)

6 4
5
7 3
8
1 2
26/11/2012

5 www.baumer.com/motion
 Incremental encoders
Solid shaft with clamping or synchro flange
Increments per turn 1005000

EIL580 - solid shaft

Dimensions

EIL580 - clamping flange, flange connector M12, radial

  


 J



[

 
[

 K





0 [

0 [



  0  [

EIL580 - clamping flange, flange connector M23, radial

   
 J



[




 
[

 K





0 [

0 [


   
0  [

EIL580 - clamping flange, cable radial

   
 J



Subject to modification in technic and design. Errors and omissions excepted.


[




 
[

 K





0 [

0 [



 
26/11/2012

6 www.baumer.com/motion
Incremental encoders
Solid shaft with clamping or synchro flange
Increments per turn 1005000

EIL580 - solid shaft

Dimensions

EIL580 - synchro flange, flange connector M12, radial

 
 
 



[

 


 K




0 [

0 [

 K


 
  0[

EIL580 - synchro flange, flange connector M23, radial

 
 
 



[

[
 


 K




0 [

0 [

 K



 
  0[

EIL580 - synchro flange, cable radial

 
 

Subject to modification in technic and design. Errors and omissions excepted.

 



[

[
 


 K




0 [

0 [

 K




  
26/11/2012

7 www.baumer.com/motion