Yamaha Yas-201 Ats-2010 PDF

FRONT SURROUND SYSTEM YAS-201/ATS-2010
SOUND BAR YAS-CU201/ATS-CU2010

WIRELESS SUBWOOFER NS-WSW40
SERVICE MANUAL
The YAS-201 consists of the YAS-CU201 and NS-WSW40.
The ATS-2010 consists of the ATS-CU2010 and NS-WSW40.
YAS-201 YAS-CU201 NS-WSW40
ATS-2010 ATS-CU2010 NS-WSW40
Note: When accepting a repair order from the user, it is recommended to receive the YAS-CU201/ATS-CU2010 and
NS-WSW40 as a set for the repair work.
YAS-CU201 NS-WSW40
IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known
and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise
all Yamaha product owners that any service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and specifications
are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor's
Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
CONTENTS
TO SERVICE PERSONNEL ........................................23 SELF-DIAGNOSTIC FUNCTION /
SYSTEM COMPOSITION / .......................3 .....................................3053
FRONT PANELS .........................................................45 IC DATA ...................................................................5457
REAR PANELS ......................................................... 610 PIN CONNECTION DIAGRAMS ...................................57
REMOTE CONTROL PANELS ..................................... 11 BLOCK DIAGRAMS ................................................5860
SPECIFICATIONS / ................................. 1214 PRINTED CIRCUIT BOARDS .................................6170
INTERNAL VIEW .......................................................... 15 SCHEMATIC DIAGRAMS .......................................7178
SERVICE PRECAUTIONS / ..... 16 REPLACEMENT PARTS LIST ................................7992
YAS-CU201/ATS-CU2010/
DISASSEMBLY PROCEDURES / ........... 1724 REMOTE CONTROL .....................................................93

NS-WSW40
UPDATING FIRMWARE / INSTALLATIONS ..........................................................94

............................2529 ..................................................................9597
Copyright (c) Yamaha Corpration All rights reserved.

101249 This manual is copyrighted by Yamaha and may not be copied or
redistributed either in print or electronically without permission.
P.O.Box 1, Hamamatsu, Japan
'12.11
YAS-CU201/ATS-CU2010/NS-WSW40
TO SERVICE PERSONNEL AC LEAKAGE

1. Critical Components Information WALL EQUIPMENT TESTER OR
Components having special characteristics are marked and OUTLET UNDER TEST EQUIVALENT
must be replaced with parts having specifications equal to those
originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
INSULATING
that all exposed conductive surfaces are properly insulated TABLE
from supply circuits.
Meter impedance should be equivalent to 1500 ohms shunted Leakage current must not exceed 0.5mA.
by 0.15 F. Be sure to test for leakage with the AC plug in both polarities.
YAS-CU201/ATS-CU2010
For U model
CAUTION
F701: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 5A, 125V
FUSE.
For C model
CAUTION
F701: REPLACE WITH SAME TYPE 5A, 125V FUSE.
ATTENTION
F701: UTILISER UN FUSIBLE DE RECHANGE DE MME TYPE DE 5A, 125V.
NS-WSW40
For U model
CAUTION
F1: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 1.6A, 125V
FUSE.
For C model
CAUTION
F1: REPLACE WITH SAME TYPE 1.6A, 125V FUSE.
ATTENTION
F1: UTILISER UN FUSIBLE DE RECHANGE DE MME TYPE DE 1.6A, 125V.
WARNING: CHEMICAL CONTENT NOTICE!

This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or
expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
NS-WSW40
2
About lead free solder /

All of the P.C.B.s installed in this unit and solder joints are
soldered using the lead free solder.
Among some types of lead free solder currently available,
it is recommended to use one of the following types for
the repair work. Sn+Ag+Cu + +
Sn + Ag + Cu (tin + silver + copper) Sn+Cu +
Sn + Cu (tin + copper) Sn+Zn+Bi + +
Sn + Zn + Bi (tin + zinc + bismuth)

Caution: 30
As the melting point temperature of the lead free solder 40
is about 30C to 40C (50F to 70F) higher than that of
the lead solder, be sure to use a soldering iron suitable
to each solder.
SYSTEM COMPOSITION /
The YAS-201 consists of the YAS-CU201 and NS-WSW40.
The ATS-2010 consists of the ATS-CU2010 and NS-WSW40.
YAS-201 YAS-CU201 NS-WSW40

ATS-2010 ATS-CU2010 NS-WSW40
YAS-201
NS-WSW40 x 1
YAS-CU201 x 1
ATS-2010
NS-WSW40 x 1
NS-WSW40
ATS-CU2010 x 1
3
FRONT PANELS
YAS-CU201
Top view
U, C, T, K, A, B, G, F, L, V, H models
J model
U, C, T, K, A, B, G, F, L, V, H models
J model
ATS-CU2010
Top view
NS-WSW40
4
NS-WSW40
Front view Side view
NS-WSW40
5
REAR PANELS
YAS-CU201 (U, C, T, K, A, B, G, F, L, V, H, J models) / ATS-CU2010 (U model)
Label
Label (YAS-CU201 U, C models)
Labels
YAS-CU201 (U, C models)
YAS-CU201 (T model)
YAS-CU201 (K model)
NS-WSW40
6
YAS-CU201 (A model)
YAS-CU201 (B, G, F models)
YAS-CU201 (L, H models)
H model
YAS-CU201 (V model)
YAS-CU201 (J model)
NS-WSW40
7
ATS-CU2010 (U model)
NS-WSW40
8
NS-WSW40
NS-WSW40 (U, C models) NS-WSW40 (K model)
NS-WSW40 (T model) NS-WSW40 (A model)
NS-WSW40
9
NS-WSW40 (B, G, F models) NS-WSW40 (V model)
NS-WSW40 (L, H models) NS-WSW40 (J model)

H model
NS-WSW40
10
REMOTE CONTROL PANELS

FSR62 FSR63
(U, C, T, K, A, B, G, F, L, V, H models) (J model)
NS-WSW40
11
SPECIFICATIONS /
Amplifier Section /
Minimum RMS Output Power / Finish /

FRONT L/R (1 kHz, 1 % THD, 6 ohms) ..................24 W + 24 W [YAS-CU201]
Maximum Effective Output Power / (JEITA) U, C, T, K, A, B, G, F, L, V, H, J models ................. Black color
FRONT L/R (1 kHz, 10 % THD, 6 ohms) ................30 W + 30 W B, G, F models ...................................................... White color
[ATS-CU2010]
Frequency Response /
U model ................................................................. Black color
FRONT L/R
100 Hz ................................................................. -0.5 1.0 dB Accessories /
1 kHz ..................................................................................... 0 Remote control ........................................................................x 1
20 kHz ................................................................. -0.5 1.0 dB
Batteries (R03, AAA, UM-4) ....................................................x 2
Total Harmonic Distortion / Optical cable (1.5 m) .............................................................x 1
FRONT L/R (1 kHz, 3.5 V/6 ohms) .......................0.05 % or less Mounting template (886 x 79) ................................................x 1
Signal to Noise Ratio / (IHF-A weighted) Transmitter for iPod [YIT-W12TXA] (J model) .........................x 1
FRONT L/R (1 kHz, 12.4 V/6 ohms) .................... 98 dB or more USB cable (A/micro B, 0.3 m) (J model) ...............................x 1
Residual Noise / (IHF-A weighted)

* Specifications are subject to change without notice.
FRONT L/R ...........................................................138 V or less

Speaker Section /
U ........................U.S.A. model G ..................European model
Type / C ..................Canadian model F..................... Russian model
T..................... Chinese model L..................Singapore model
FRONT L/R .......................... Acoustic suspension type / K ...................... Korean model V ...................... Taiwan model
A .................Australian model H ...........................Thai model
Driver /
B .......................British model J .................. Japanese model
FRONT L/R
........... 5.5 cm (2-1/8") cone non-magnetic shielding type x 2
5.5 cm x 2
Frequency Response /
FRONT L/R ......................................................150 Hz to 20 kHz
Impedance /
FRONT L/R ......................................................................6 ohms
General /
Power Supply /
U, C models ..................................................... AC 120 V, 60 Hz
T, K, A, B, G, F, L, H models ............... AC 220240 V, 50/60 Hz
V model ............................................................ AC 110 V, 60 Hz
J model ....................................................... AC 100 V, 50/60 Hz
Power Consumption /
........................................................................................... 17 W
Standby Power Consumption /

NS-WSW40
U, C, V, J models ..............................................Less than 2.0 W

T, K, A, B, G, F, L, H models .............................Less than 2.2 W
Dimensions (W x H x D) /
with stand ............ 886 x 98 x 121 mm (34-7/8" x 3-7/8" x 4-3/4")
without stand ....... 886 x 80 x 121 mm (34-7/8" x 3-1/8" x 4-3/4")
Weight /
.......................................................................... 3.1 kg (6.8 lbs.)
12
NS-WSW40
Speaker Section /
Type /
............................ Advanced Yamaha Active Servo Technology
Linear Port This system employs new technologies and algorithms that make it
possible to achieve 7-channel surround sound with only front speakers, and
Output Power / (100 Hz, 10 % THD, 5 ohms) without using wall reflections.
........................................................................................... 50 W AIR SURROUND XTREME

Dynamic Power / (5 ohms) 7.1ch 1
......................................................................................... 100 W
Driver /
...................... 16 cm (6-1/4") cone magnetic shielding type x 1
16 cm x 1 UniVolume is a trademark of Yamaha Corporation.
UniVolume
Wireless Section /
Band Frequency /
...................................................................................... 2.4 GHz
The and yAired are trademarks of Yamaha Corporation.
Transmission Range /
.......................................................................about 20 m (66 ft)
(without interference / )
Latency /
The and AirWired are trademarks of Yamaha Corporation.
Group ID = A1, A2 ............................................................50 ms AirWired
Group ID = C1, C2 ............................................................12 ms
General /
Power Supply / Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and
the double-D symbol are trademarks of Dolby Laboratories.
U, C models ..................................................... AC 120 V, 60 Hz

T, K models ................................................. AC 220 V, 50/60 Hz DolbyPRO LOGIC D
A model ............................................................ AC 240 V, 50 Hz
B, G, F models ................................................. AC 230 V, 50 Hz

L, H models ...........................AC 110120/220240 V, 50/60 Hz
V model .................................................... AC 110120 V, 60 Hz
J model ....................................................... AC 100 V, 50/60 Hz DTS and DTS Digital Surround are registered trademarks of DTS, Inc.
DTS DTS Digital Surround
Power Consumption /
U, C, T, K, A, B, G, F, L, V, H models .................................. 45 W
J model .............................................................................. 30 W
Dimensions (W x H x D) /
....................... 290 x 292 x 316 mm (11-3/8" x 11-1/2" x 12-3/8") AAC
Weight /
........................................................................ 8.3 kg (18.3 lbs.)
Finish / iPad, iPhone, iPod, iPod nano and iPod touch are trademarks of Apple Inc.,
U, C, T, K, A, B, G, F, L, V, H, J models .................... Black color registered in the U.S. and other countries.
iPadiPhoneiPodiPod nanoiPod touch
B, G, F models ......................................................... White color
Apple Inc.
* Specifications are subject to change without notice.

NS-WSW40

Windows Microsoft Corporation

U ........................U.S.A. model G ..................European model Windows XPWindows VistaWindows 7 Microsoft Corporation
C ..................Canadian model F..................... Russian model
T..................... Chinese model L..................Singapore model
K ...................... Korean model V ...................... Taiwan model
A .................Australian model H ...........................Thai model
B .......................British model J .................. Japanese model
13
DIMENSIONS /
(1/4")
6
Top view
(4-3/4")
(4-1/2")
121
115
(with Stand/)
Front view (without Stand/)
(3-1/8")
(2-7/8")
(3-7/8")
80
73
98
750 (29-1/2")
18
(1-1/8")
886 (34-7/8")
Stand/
457 (18") 173 (6-3/4")
Rear view
37 (1-1/2")
32 (1-1/4")
120 (4-3/4")
4 (1/8")
9 (3/8")
Unit: mm (inch)
mm
NS-WSW40
Front view Side view
290 (11-3/8") 316 (12-3/8")
25 (1") 290 (11-3/8")
291.5 (11-1/2")
290 (11-3/8")
NS-WSW40
1.5 (1/16")
20 (3/4") 249 (9-3/4") 20 (3/4") 20 (3/4") 250 (9-7/8") 20 (3/4")
Unit: mm (inch)
mm
14
INTERNAL VIEW
1 2 3 4
Top view
5 6 7 8
Front view
10 9
Rear view
11
1 POWER (1) P.C.B. 7 AWCD2A P.C.B.
2 DAMP P.C.B. 8 POWER (3) P.C.B.
3 DIGITAL P.C.B. 9 DRIVER FRONT R
4 INPUT P.C.B. 10 DRIVER FRONT L
5 POWER (2) P.C.B. 11 POWER (5) P.C.B.
6 POWER (4) P.C.B.
NS-WSW40
1 2 3 4
1 MAIN (1) P.C.B.

2 MAIN (3) P.C.B.
3 DAC P.C.B.
4 AWCD2B P.C.B.
5 MAIN (2) P.C.B.
6 POWER TRANSFORMER
7 MAIN (4) P.C.B.
NS-WSW40
7 6 5
15
SERVICE PRECAUTIONS /
Operation check
NS-WSW40 does not operate by itself. NS-WSW40
To check its operation, prepare the YAS-CU201/ATS- YAS-CU201
CU2010.
Precaution for handling measuring instrument

Since the speaker output of this unit is BTL connected, the
ground side of the measuring instrument to be connected
to the speaker terminal MUST be kept in floating condition.
Safety measures OFF

Some internal parts in this product contain high voltages
and are dangerous. 5 k /10 W
Be sure to take safety measures during servicing, such
as wearing insulating gloves. 30
Note that the capacitors indicated below are dangerous YAS-CU201/ATS-CU2010

even after the power is turned off because an electric POWER1P.C.B. C713
charge remains and a high voltage continues to exist NS-WSW40
there. MAIN1P.C.B. C23C24
Before starting any repair work, connect a discharging
resistor (5 k-ohms/10 W) to the terminals of each PRINTED CIRCUIT BOARDS
capacitor indicated below to discharge electricity.
The time required for discharging is about 30 seconds
per each.
C713 on POWER (1) P.C.B.
NS-WSW40
C23 and C24 on MAIN (1) P.C.B.
For details, refer to PRINTED CIRCUIT BOARDS.

Since the speaker output of this unit is BTL connected, the BTL
ground side of the measuring instrument to be connected
to the speaker terminal MUST be kept in floating condition.
NS-WSW40
16
DISASSEMBLY PROCEDURES /
Disconnect the power cable from the AC outlet. AC
1. Removal of Light Guide Bar 1.

a. Remove screw (). (Fig. 1) a. 1 Fig. 1
b. Remove the light guide bar. (Fig. 1) b. Fig. 1
Note when installing the light guide bar

The light guide bar has a specific installation direction.
When installing the light guide bar, set it so that its
mark is on the Left channel side.
(Fig. 1) L
Fig. 1
If the light guide bar is installed in reverse, the TV
remote control relay function will not operate properly.
Left channel side
Rear view
Top side Left channel side
Light guide bar

Right channel side
Mark
Light guide bar

Fig. 1
NS-WSW40
17
2. Removal of Cabinet Assembly 2. Ass'y

a. Remove 10 screws (). (Fig. 2) a. 10 Fig. 2
b. Remove 9 screws (). (Fig. 2) b. 9 Fig. 2
c. Pull out the cabinet assembly. (Fig. 2) c. Ass'y Fig. 2
d. Remove screw (). (Fig. 2) d. 1 Fig. 2
e. Remove the POWER (5) P.C.B. (Fig. 2) e. POWER5P.C.B. Fig. 2
f. Remove the cabinet assembly. (Fig. 2) f. Ass'y Fig. 2
3. Removal of Amp Unit 3.

b. Disconnect 4 connectors connected to the terminal of b. L/ R
the drivers (FRONT L/FRONT R). (Fig. 2) 4 Fig. 2
c. Remove CB841. (Fig. 2) c. CB841 Fig. 2
d. Remove the amp unit. (Fig. 2) d. Fig. 2
4. Removal of Top Frame 4.

b. Remove the top frame. (Fig. 2) b. Fig. 2

Rear view

Cabinet assembly
Ass'y
DRIVER (FRONT L)
L

POWER (5) P.C.B.

Top frame

Amp unit

Baffle unit
DRIVER (FRONT R)
R
DRIVER /
Connector
NS-WSW40

POWER (3) P.C.B.
CB841
Fig. 2
18
5. Removal of DAMP P.C.B. 5. DAMP P.C.B.

b. Remove CB501 and CB503. (Fig. 3) b. CB501CB503 Fig. 3
c. Remove the DAMP P.C.B. (Fig. 3) c. DAMP P.C.B.
Fig. 3
6. Removal of AWCD2A and POWER (4) P.C.B.s 6. AWCD2APOWER4P.C.B.

a. Remove 3 screws () and screw (). a. 3 1 Fig. 3
b. Remove the shield. b. Fig. 3)
c. Remove CB301 and then remove the AWCD2A P.C.B. c. CB301 AWCD2A P.C.B.
which is connected directly to the INPUT P.C.B. with AWCD2A P.C.B. INPUT P.C.B.
board-to-board connectors. (Fig. 3) Fig. 3
d. Remove screw (). (Fig. 3) d. 1 Fig. 3
e. Remove CB801 and then remove the POWER (4) e. CB801 POWER4P.C.B.
P.C.B. which is connected directly to the INPUT P.C.B. POWER4P.C.B. INPUT P.C.B.
with board-to-board connectors. (Fig. 3) Fig. 3
7. Removal of DIGITAL and INPUT P.C.B.s 7. DIGITALINPUT P.C.B.

b. Remove 6 screws (). (Fig. 3) b. 6 Fig. 3
c. Remove CB1 and CB103. (Fig. 3) c. CB1CB103 Fig. 3
d. Remove the DIGITAL P.C.B. together with the INPUT d. DIGITAL P.C.B. INPUT P.C.B.
P.C.B. (Fig. 3) Fig. 3
8. Removal of POWER (1) P.C.B. 8. POWER1P.C.B.

b. Remove CB701. (Fig. 3) b. CB701 Fig. 3
c. Remove the power cable. (Fig. 3) c. Fig. 3
d. Remove the POWER (1) P.C.B. (Fig. 3) d. POWER1P.C.B. Fig. 3

CB701

POWER (1) P.C.B.

CB503
AWCD2A P.C.B.
DAMP P.C.B.
Shield
CB501
Power cable
DIGITAL P.C.B. CB101
CB1
CB103
INPUT P.C.B.

Board-to-board connectors

CB304
NS-WSW40
CB301
CB801
POWER (4) P.C.B.

POWER (2) P.C.B.
Fig. 3 19
When checking the P.C.B.s: P.C.B.

Spread the rubber sheet and the cloth. Then place P.C.B.
P.C.B.s on the cloth and check it. (Fig. 4) Fig. 4
Reconnect all cables (connectors) that have been
disconnected.
When connecting the flexible flat cable, be careful
with polarity.
Ground lead DAMP P.C.B.

Frame

DIGITAL P.C.B.
POWER (2) P.C.B.
INPUT P.C.B.
POWER (5) P.C.B.
Baffle unit

POWER (1) P.C.B.
Rubber sheet and cloth

POWER (4) P.C.B.
AWCD2A P.C.B.
POWER (3) P.C.B.
Fig. 4
NS-WSW40
20
NS-WSW40
(Remove parts in the order as numbered.) ( )
Disconnect the power cable from the AC outlet. AC
1. Removal of Front Grille Assembly 1. Ass'y

and Front Panel
a. Spread a rubber sheet and cloth for protection of this a.
unit against any damage and place this unit upside Fig. 1)
down on the cloth. (Fig. 1) Ass'y 16
* The front grille assembly and front panel are fixed
to the cabinet with dowels at 16 locations.
As a flatblade screwdriver is used for removal, use
special care not to cause damage to the cabinet. b. 2
b. First, insert a flatblade screwdriver at 2 dowel positions Ass'y Fig. 1
and push up the front grille assembly. (Fig. 1) c.
c. Next, using the metalblade or the like, push the front Ass'y Fig. 1
grille assembly and front panel upward until they come
off. (Fig. 1)
2. Removal of Driver Subwoofer 2.

a. Remove 4 screws () and then pull out the driver a. 4
subwoofer. Fig. 1
(Fig. 1) b.
b. Disconnect the connector connected to the terminal Fig. 1
of the driver. (Fig. 1) c. Fig. 1
c. Remove the driver. (Fig. 1)
Bottom side
Flatblade screwdriver

Cabinet assembly
Ass'y
Connector

Driver subwoofer
NS-WSW40


Metalblade
Front grille assembly and Front panel
Ass'y
Fig. 1
21
Notes:
Removing the front grille assembly and front panel Ass'y
with the flatblade screwdriver only without using the
metalblade or the like may cause damage to the front Ass'y
grille assembly and front panel.
When installing the front grille assembly and front panel, Ass'y
apply quick-drying bond or the like to dowels and then Ass'y
fit them into dowel holes for secure installation.
(The front grille assembly and front panel will come off
easily if its dowels are fitted into dowel holes without Ass'y
applying quick-drying bond or the like.)
3. Removal of Rear Panel Assembly 3. Ass'y

a. Loosen the cable clamp. (Fig. 2) a. Fig. 2
b. Remove 8 screws () and remove the rear panel b. 8 Ass'y
assembly. (Fig. 2) Fig. 2
* Screws () are identified with arrow marks ( ).

Bottom side

Cabinet assembly
Ass'y

Rear panel assembly

Ass'y
Cable clamp

Fig. 2
NS-WSW40
22
4. Removal of AWCD2B P.C.B. 4. AWCD2B P.C.B.

a. Remove screw (). (Fig. 3) a. 1 Fig. 3
b. Remove CB601. (Fig. 3) b. CB601 Fig. 3
c. Remove the hook. (Fig. 3) c. Fig. 3
d. Remove CB602 and then remove the AWCD2B P.C.B. d. CB602 AWCD2B P.C.B. DAC2P.C.B.
together with the DAC (2) P.C.B. which is connected Fig. 3
directly to the DAC (1) P.C.B. with board-to-board DAC2P.C.B. DAC1P.C.B.
connectors. (Fig. 3) Fig. 3
AWCD2B P.C.B. DAC (2) P.C.B.
CB652 Rear panel assembly

Ass'y
Board-to-board connectors

CB602
Hook

DAC (1) P.C.B.

CB601
Fig. 3
NS-WSW40
23
When checking the P.C.B.: P.C.B.

Spread the rubber sheet and cloth. Then place this
unit on the cloth and check it. (Fig. 2) Fig. 4
Reconnect all cables (connectors) that have been
disconnected.
Rear panel ass'y

Ass'y

Fig. 4
NS-WSW40
24
UPDATING FIRMWARE /
When the following parts are replaced, the firmware must
be updated to the latest version.
DIGITAL P.C.B. DIGITAL P.C.B.
Confirmation of firmware version and checksum

Before and after updating the firmware, check the
firmware version and checksum by using the self-
diagnostic function menu.
Start up the self-diagnostic function and select k k FACTORY PRESET
FACTORY PRESET menu.
Using the sub-menu, have the firmware version and
checksum displayed, and note them down.
(See SELF-DIAGNOSTIC FUNCTION)
* When the firmware version and checksum are
different from written ones after updating, perform

the updating procedure again from the beginning.
Required Tools
CD, DVD or BD player (with DIGITAL OUTPUT CDDVD BD DIGITAL
(OPTICAL) jack) OUTPUTOPTICAL
* The following models can be used as a tool to update the firmware.

CD player: CD-C600/CD-S1000/CD-S2000/CD-S300/CD-S700/CDX-496/CDX-596/CDX-890
DVD player: DV-C6760/DVD-840/DVD-C740/DVD-C750/DVD-C940/DVD-C950/DVD-CX1/DVD-S1200/
DVD-S1800/DVD-S2300(MKII)/DVD-S2700/DVD-S30/DVD-S510/DVD-S520/DVD-S530/
DVD-S540/DVD-S550/DVD-S657/DVD-S700/DVD-S80/DVD-S840
BD (Blu-ray) player: BD-940/BD-S1065/BD-S1900/BD-S2900/BD-S671
Others: CDR-D651/CDR-HD1000/CDR-HD1300/CDR-HD1500/DV-SL100/CDX-E100/CRX-430/
CRX-E150/RDX-E700
Optical cable (when OPTICAL jack is used) OPTICAL
Firmware CD CD
Download the latest firmware from the specified
download source and create the firmware CD. CD

NS-WSW40
25
Connection
Connect a CD/DVD/BD player to this unit as shown CD/DVD/BD
below. (Fig. 1) Fig. 1
Example of OPTICAL jack / OPTICAL
This unit / (rear view / )

CD/DVD/BD player
CD/DVD/BD
Optical cable

Fig. 1
NS-WSW40
26
Operation Procedures
1. While pressing the VOLUME + and VOLUME 1. VOLUME + VOLUME -
keys, connect the power cable to the AC outlet. AC
(Fig. 2) Fig. 2
The FIRMWARE UPDATE mode is activated and
SUBWOOFER indicator flashes green. (Fig. 2) SUBWOOFER
Fig. 2
2. Play the firmware CD on the CD/DVD/BD player.
Writing of the firmware starts automatically. 2. CD/DVD/BD CD

This unit / (Front view / )
J model " " (Power) key

" "
"VOLUME " key "VOLUME +" key

SUBWOOFER indicator
SUBWOOFER "VOLUME" "VOLUME"
FIRMWARE UPDATE mode

Flashes Green

Writing of the firmware is started

Lights Green Flashes Green

Writing of the firmwre is being executed


NS-WSW40
Writing of the firmware is completed


Fig. 2
27
3. When writing of the firmware is completed, the 3.

indicators operate as follows repeatedly.
All light Indicates the firmware version
Example: When the firmware version is C

C

List of firmware version indication /

D / DTS Firmware
TV BD/DVD YIT SURROUND CLEAR VOICE UNIVOLUME PL SUBWOOFER
AAC (J model) version
Green Green A
Green Green B
Green Green C
Green Green D
Green Green E
Green Green F
Green Green G
Green Green H
Green Green Green I
Green Green Green J
Green Green Green K
Green Green Green L
Green Green Green M
Green Green Green N
Green Green Green O
Green Green Green Green P
:

4. Press the (Power) key to turn off the power. 4. Fig. 2

(Fig. 2)
* When writing of the firmware is completed, the ICEEPROMDIGITAL P.C.B. IC2
backup IC (EEPROM: IC2 on DIGITAL P.C.B.)
is initialized automatically.
5. CD/DVD/BD CD
5. Eject the firmware CD from the CD/DVD/BD player.
6. Start up the self-diagnostic function and check 6.

that the firmware version and checksum are the
NS-WSW40
same as written ones.

(For details, refer to Confirmation of firmware
version and checksum.)
28
ERROR INDICATION AND MEASURE /

ERROR INDICATION / MEASURE /
J model
Unplugged

Flashes Red Flashes Green Perform operation procedures again
from the beginning.
J model

Unplayed

Flashes Orange Flashes Green

J model
Firmware data error

Flashes Green Flashes Red Flashes Green
1. Check that the firmware CD is proper
for writing.
J model
2. Perform operation procedures
Firmware checksum
again from the beginning.
error
1. CD

Flashes Green Flashes Orange Flashes Green

2.
J model
Firmware data time out
error

Flashes Green Flashes Green

NS-WSW40
29
SELF-DIAGNOSTIC FUNCTION /
This unit has self-diagnostic functions that are intended
for inspection, measurement and location of faulty point.
There are 11 main menu items, each of which has sub- 11
menu items.
Listed in the table below are main menu items and sub-
menu items.
Note: Some of menu items listed below may not apply to
the models covered in this service manual.
Main Menu Sub-Menu

a DSP THROUGH a VOLUME 0
b VOLUME 10
c VOLUME 30
d VOLUME 50
h HELP
m DIAG MENU
b LED CHECK a ALL ON
b GREEN PATTERN
c RED PATTERN
d ALL OFF
h HELP
m DIAG MENU
c TEST TONE a TEST ALL
b LEFT OUT
c RIGHT OUT
d LFE OUT
e AUDIO OUT (Not for service / )
h HELP
m DIAG MENU
d A/D DATA CHECK a PS1 (+19V) PROTECTION
b PS2 (+12D) PROTECTION
c PS4 (+3.3D) PROTECTION
d PS5 (+1.2D) PROTECTION
e DC PROTECTION
f PRI (+19V) PROTECTION
g PANEL KEY
h HELP
NS-WSW40
i DESTINATION
m DIAG MENU
e PROTECTION HISTORY a OUTPUT HISTORY
b CLEAR HISTORY
h HELP
m DIAG MENU
30
Main Menu Sub-Menu

f POWER OFF HISTORY a OUTPUT HISTORY
b CLEAR HISTORY
h HELP
m DIAG MENU
g SWEEP TEST a AIR LEAK CHECK
(Not for service / ) b VIBRATION NOISE CHECK
m DIAG MENU
h HELP
i EMC TEST a EMC TEST ON
(Not for service / ) b DAMP MUTE
c DAMP POWER DOWN
d AW DIRECTION
h HELP
m DIAG MENU
j DTS TEST a L=NORMAL, R=NORMAL
(Not for service / ) b L=LF, R=RF
c L=LS, R=RS
d L=CENTER, R=NONE
e L=LF, R=LS
f L=RF, R=RS
h HELP
m DIAG MENU
k FACTORY PRESET a INHIBIT
b RESERVE
c FIRMWARE INFORMATION
h HELP
m DIAG MENU
NS-WSW40
31
Required tools
Program .........................................HyperTerminal .......................................
* HyperTerminal application is pre-installed into Windows PC
the WINDOWS operating system.
RS232C cross cable D-sub 9 pin female RS232C D-sub 9pin
(Specifications)
Pin No.2 RxD Pin No.2 RxD Pin No.2 RxD Pin No.2 RxD
Pin No.3 TxD Pin No.3 TxD Pin No.3 TxD Pin No.3 TxD
Pin No.5 GND Pin No.5 GND Pin No.5 GND Pin No.5 GND
Pin No.7 RTS Pin No.7 RTS Pin No.7 RTS Pin No.7 RTS
Pin No.8 CTS Pin No.8 CTS Pin No.8 CTS Pin No.8 CTS
RS-232C conversion adaptor RS-232C

(Version 4.0, Part No.: WZ064500) 4.0WZ064500
Connection
* Disconnect the power cable of this unit from the AC
AC outlet.
RS-232C
Set the switches on RS-232C conversion adaptor Fig. 1
as shown below. (Fig. 1)
DSP ucom T
ucom DSP R
RS-232C conversion adaptor

SW7
T
SW4
R RS-232C
Switches Setting /
Microprocessor type Firmware to be updated SW7 SW4

Microprocessor firmware writing mode

T type
Self-diagnostic function mode

Microprocessor firmware writing mode

R type
Self-diagnostic function mode

Fig. 1
NS-WSW40
32
Connect the serial port (RS-232C) of the PC to the POWER P.C.B.

writing port (CB901 on POWER P.C.B.) of this unit CB901 PC RS-232C
as shown below. (Fig. 2) Fig. 2
PC
This unit / (rear view / )
Serial port (RS-232C) Writing port
RS-232C
RS-232C conversion adaptor

RS-232C
RS-232C cross cable Flexible flat cable (9P)
RS-232C
9P
Fig. 2
NS-WSW40
33
Starting HyperTerminal
Start up HyperTerminal before starting Self-Diagnostic
Function.
1. Click [start] [Accessories] [Communications] 1.
[HyperTerminal] (Fig. 3) ]
Fig. 3
Fig. 3
The Connection Description screen appears. Fig. 4

(Fig. 4)
2. Enter YAS-201, and click [OK]. (Fig. 4) 2. YAS-201 OK

The Connect To screen appears. (Fig. 5) Fig. 4
Fig. 5
3. Select Connect using. (Fig. 5) 3. Fig. 5
Select the COMx for serial port (RS-232C), and RS-232C COMx
click [OK]. (Fig. 5) OKFig. 5
NS-WSW40
Click [OK] Click [OK]

OK OK
Fig. 4 Fig. 5
34
The Port Settings screen appears. (Fig. 6) Fig. 6
4. Select the following settings, and click [OK]. 4.

OK
(Fig. 6) Fig. 6
115200
None
None
Click [OK]
OK
Fig. 6
The YAS-201 - HyperTerminal screen appears. YAS-201 -

(Fig. 7) Fig. 7
Fig. 7
NS-WSW40
35
Starting Self-Diagnostic Function

* Start up HyperTerminal before starting Self-Diagnostic
Function. (For deails, refer to Starting HyperTerminal)

With this unit in the stand-by mode, press the keys on the
remote control in the specified order as shown below.
The self-diagnostic function mode is activated.

Keys on the remote control /
Indicators of this unit /
Indicator / J model
Flashes Red

NS-WSW40
36
Starting Self-Diagnostic Function in

the protection cancel mode
If the protection function works and causes hindrance
to troubleshooting, cancel the protection function by the
procedure below, and it will be possible to enter the self-
diagnostic function mode.
With this unit in the stand-by mode, press the keys on the
remote control in the specified order as shown below.

The self-diagnostic function mode is activated with the
protection functions disabled.
Keys on the remote control /
Indicators of this unit /
Indicator / J model
Flashes Orange

For details of protection functions, refer to e PROTECTION e PROTECTION HISTORY

HISTORY menu.
NS-WSW40
CAUTION!
Using this product with the protection function disabled
may cause further damage to this unit. Use special care
for this point when using this mode.

37
Canceling Self-Diagnostic Function

1. Before canceling self-diagnostic function, execute 1. k FACTORY PRESET
setting for k FACTORY PRESET menu. (Memory
initialization inhibited or Memory initialized).
* In order to keep the user memory preserved, be
sure to select PRESET INHIBIT (Memory initialization PRESET INHIBIT
inhibited).
2. Press the (Power) key to turn off the power. 2.
Display provided when Self-Diagnostic

Function started
The following informations are displayed on the PC. PC
00h58m28s807ms:<system>Wait Power On
00h00m11s813ms:<system>System Power On!
:<device>DIR Init Start!
:<device>DIR Init End!
:<device>DSP Init Start!
:<device>PWM Init Start!
00h00m11s867ms:<system>Main Power On! Opening message
:<system>IR Pass Through Power
On
:<diag>AW Card Power Off
:<device>PWM Init End!
00h00m14s816ms:<diag>Device Check : 0000
00h00m14s823ms:<system>DSP BOOT Finish
--- Firmware Info ---
Model YAS-201
Dest UC
Main Ver C0343 Firmware information
TI Ver 02.00r
AW Ver 03.00.00
Check Sum 0x94cf
---------------------
/////////////////////////////////////////
---- Welcome to YAS-201 Debug Mode! ----
( Protection Enable ) ( Protection Enable ): Protection mode

--- Diag Function Menu ---
a:DSP Through ( Protection Disable ): Protection cancel mode
b:LED Check
c:Test Tone
d:AD Data Check
e:Protection History
f:Power Off History Main menu list
g:Sweep Test
h:Help
i:EMC Test
j:DTS Test
k:Factory Preset
-------------------------
//////////////////////////////////////////
NS-WSW40
38
Operation procedure of Main menu

and Sub-menu
There are 11 main menu items, each of which has sub- 11
menu items.
Main menu selection

Enter a lower-case alphabet displayed at the head of
each main menu, and press ENTER key. ENTER
Sub-menu selection
When the main menu is selected, the sub-menu is
displayed.
Enter a lower-case alphabet displayed at the head of
each sub-menu, and press ENTER key. ENTER
Main menu / Sub-menu /
--- Diag Function Menu --- a

a:DSP Through --- DSP Through ---
b:LED Check a:Volume 0
c:Test Tone b:Volume 10
d:AD Data Check c:Volume 30
e:Protection History d:Volume 50
f:Power Off History h:Help
g:Sweep Test m:Diag Menu
h:Help --------------------
i:EMC Test
j:DTS Test
k:Factory Preset
-------------------------
Alphabet Alphabet

Functions in Self-Diagnostic Function

mode
In addition to the self-diagnostic function menu items,
functions listed below are available.
Power off
Master volume
Mute
Input source
Subwoofer volume
SURROUND/STEREO

CAUTION: Since the output-volume level is raised
automatically when the following menu items
are selected, take care to sudden output-

volume change when you check the output-
NS-WSW40
a. DSP THROUGH
volume level with the speaker connected to 30 50
this unit.
c. CHANNEL TEST TONE
a. DSP THROUGH 20
(Master volume 30, Master volume 50)
c. CHANNEL TEST TONE
(Master volume 20)
39
Initial settings when Self-Diagnostic

Function started
The following initial settings are used when self-diagnostic
function is started.
When self-diagnostic function is canceled, these settings
TVOptical input 2
are restored to those before starting self-diagnostic
0 50
function.
0 4
INPUT: TV (Optical input 2) IR
Master volume: 1 (0 to 50) AirWired OFF
Subwoofer volume: 0 (4)
IR Pass Through: ON
AirWired Power: OFF
NS-WSW40
40
Details of Self-Diagnostic Function

menu
a. DSP THROUGH a. DSP THROUGH
This menu is used to select the master volume level.
Default set: TV (Optical input 2) TVOptical input 2
* The input source can be selected by using the INPUT
INPUT key.
Sub-menu screen /
a
--- DSP Through ---
a:VOLUME 0
b:VOLUME 10
c:VOLUME 30
d:VOLUME 50
h:Help
m:Diag Menu
--------------------
a-a. VOLUME 0 (Mute) a-a. VOLUME 0Mute

Master volume: 0 0
a
:<system>Volume: 0
a-b. VOLUME 10 (Default) a-b. VOLUME 10Default

Master volume: 10 10
b
:<system>Volume: 10
a-c. VOLUME 30 (0 dB) a-c. VOLUME 300 dB

c
:<system>Volume: 30
a-d. VOLUME 50 (Maximum volume) a-d. VOLUME 50Maximum volume

d
:<system>Volume: 50
NS-WSW40
a-h. Help a-h. Help

The sub-menu is displayed.
a-m. Diag Menu a-m. Diag Menu

The main menu is displayed.
41
b. LED CHECK b. LED CHECK

This menu is used to check operation of the indicators.
Sub-menu screen /
b
--- LED Check ---
a:ALL ON
b:GREEN PATTERN
c:RED PATTERN
d:ALL OFF
h:Help
m:Diag Menu
-----------------
b-a. ALL ON b-a. ALL ON

All indicators light.
Lights Orange
Lights Green / Lights Green /
b-b. GREEN PATTERN b-b. GREEN PATTERN

All indicators light green.
Lights Green /
b-c. RED PATTERN b-c. RED PATTERN

The Dolby Digital/DTS indicator light red. Dolby Digital/DTS/AAC

Lights Red

b-d. ALL OFF b-d. ALL OFF

All indicators turn off.
NS-WSW40
b-h. Help b-h. Help

b-m. Diag Menu b-m. Diag Menu

42
c. TEST TONE c. TEST TONE

* When this menu is selected, the master volume
level is raised up to 20 automatically. 20
The built-in noise generator of DSP outputs the test DSP
noise through the channels specified by using the
sub-menu.
Test noise /
for SUBWOFER / 30 Hz to 80 Hz pink noise /
for other than SUBWOFER / 500 Hz to 2 kHz pink noise /
Sub-menu screen /
c
--- Test Tone ---
a:TEST ALL
b:LEFT OUT
c:RIGHT OUT
d:LFE OUT
e:AUDIO OUT
h:Help
m:Diag Menu
-----------------
c-a. TEST ALL c-a. TEST ALL

The test noise is output to all channels.

a
:<system>Volume: 20
:<system>Format Change: ---
:<system>Mute Off!
c-b. LEFT OUT c-b. LEFT OUT

The test noise is output to left channel. L
b
:<system>Volume: 20
:<system>Mute Off!
c-c. RIGHT OUT c-c. RIGHT OUT

The test noise is output to right channel. R
NS-WSW40
c
:<system>Volume: 20
:<system>Mute Off!
43
c-d. LFE OUT c-d. LFE OUT

The test noise is output to LFE (subwoofer) LFE
channel.
d
:<system>Volume: 20
:<system>Mute Off!
c-e. AUDIO OUT c-e. AUDIO OUT

Not for service.
e
:<system>Volume: 20
:<system>Mute Off!
c-h. Help c-h. Help

c-m. Diag Menu c-m. Diag Menu

NS-WSW40
44
d. A/D DATA CHECK d. A/D DATA CHECK

This menu is used to display the A/D conversion
value of the microprocessor which detects panel keys A/D
and protection functions by using the sub-menu.
* Numeric values in the figure are given as reference
only.
Sub-menu screen /
d
--- AD Data Check ---
a:PS1(+19V) PROTECTION
b:PS2(+12D) PROTECTION
c:PS4(+3.3D) PROTECTION
d:PS5(+1.2D) PROTECTION
e:DC PROTECTION
f:PRI(+19V) PROTECTION
g:PANEL KEY
h:Help
i:DESTINATION
m:Diag Menu
---------------------
d-a. PS1 (+19V) PROTECTION d-a. PS1+19VPROTECTION

Power supply voltage (+19V) protection +19V
detection DIGITAL P.C.B.
Detection port: 98 pin of microprocessor IC1 98
(IC1 on DIGITAL P.C.B.)
Normal voltage value range: 102 1531V 2.19V
102 to 153 (1V to 2.19V) 3.3 V=255
(Reference voltage: 3.3V = 255)
a
PS1 (+19V) : 135 A/D value / A/D
1.74 V Detected voltage value /
Range: 1.00--2.19 V Normal voltage value range /
d-b. PS2 (+12D) PROTECTION d-b. PS2+12DPROTECTION

Power supply voltage (+12D) protection +12D
Normal voltage value range: 104 1301.34V 1.68V
104 to 130 (1.34V to 1.68V) 3.3 V=255
b
NS-WSW40
PS2 (+12D) : 117 A/D value / A/D

45
d-c. PS4 (+3.3D) PROTECTION d-c. PS4+3.3DPROTECTION

Power supply voltage (+3.3D) protection +3.3D
Normal voltage value range: 104 1551.34V 2V
104 to 155 (1.34V to 2V) 3.3 V=255
c
PS4 (+3.3D) : 128 A/D value / A/D
d-d. PS5 (+1.2D) PROTECTION d-d. PS5+1.2DPROTECTION

Power supply voltage (+1.2D) protection +1.2D
Normal voltage value range: 79 1071.02V 1.38V
79 to 107 (1.02V to 1.38V) 3.3 V=255
d
PS5 (+1.2D) : 92 A/D value / A/D
NS-WSW40
46
d-e. DC PROTECTION d-e. DC PROTECTION

DC voltage of speaker output protection DC
detection
Detection port: 99 pin of microprocessor DIGITAL P.C.B.
(IC1 on DIGITAL P.C.B.) IC1 99
Normal voltage value range:
105 to 150 (1.36V to 1.94V) 105 1501.36V 1.94V
(Reference voltage: 3.3V = 255) 3.3 V=255
e
DC : 128 A/D value / A/D
d-f. PRI (+19V) PROTECTION d-f. PRI+19VPROTECTION

Over-current (+19V) protection detection +19V
DC voltage of speaker output protection DC
detection
Normal voltage value range:
39 to 116 (0.5V to 1.5V) 39 1160.5V 1.5V
f
PRI (+19V) : 50 A/D value / A/D
CAUTION!
Applying the power to this unit without correcting the
abnormality can be dangerous and cause additional
circuit damage. DC/PRI
To avoid this, if DC or PRI protection function works 3 3
times continuously, the power will not turn on even when
the (Power) key is pressed. AC
In order to turn on the power again, disconnect the
power cable of this unit from the AC outlet once and
then reconnect it again.

NS-WSW40
47
d-g. PANEL KEY d-g. PANEL KEY

Panel key is detected.
When any key on the panel is pressed, the
detection result is displayed as shown below.
g
Key : INPUT Key name /
2 A/D value / A/D
Range: 0--0.344 V Normal voltage value range /
When the A/D conversion value of the panel A/D

key becomes out of the specified range, normal
operation will not be available. In that case,
check the constant of voltage dividing resistor,
solder condition, etc. Refer to table below.
KEY
Detected: KEY DIGITAL P.C.B.
3.3 V=255
Key name / INPUT VOLUME + VOLUME - Key off

Ohm / 0 +4.3 k +6.8 k open
Normal voltage value range /
0 0.344 V 0.853 1.164 V 1.177 1.494 V 3.3 V

A/D value range / A/D 0 27 66 90 91 155 255
* Press the (Power) key to turn off the power. /
NS-WSW40
48
d-h. Help d-h. Help

d-i. DESTINATION d-i. DESTINATION

The destination is displayed.
i
Dest: UC
Detected: DEST DEST

Destination / U, C J V T, K, A, F, L, H B, G
R751 on POWER P.C.B. 6.8 k 10 k 15 k 39 k open
Normal voltage value range /
1.156 1.485 V 1.486 1.815 V 1.816 2.145 V 2.476 2.805 V 3.136 3.3 V

A/D value range / A/D
89 115 116 140 141 166 191 217 242 255
(92 pin, DEST)
d-m. Diag Menu d-m. Diag Menu

NS-WSW40
49
e. PROTECTION HISTORY e. PROTECTION HISTORY

This menu is used to display the history of protection
function.
Sub-menu screen /
e
--- Protection History ---
a:OUTPUT HISTORY
b:CLEAR HISTORY
h:Help
m:Diag Menu
--------------------------
e-a. OUTPUT HISTORY e-a. OUTPUT HISTORY

The history of protection function is displayed.
* Numeric values in the figure are given as
reference only.
a
--- Protection History ---
1. PS1 PRT History 1 / 1
2. PRI PRT History 2 / 2
3. DC PRT History 3 / 3
4. PS3 PRT History 4 / 4
5. No PRT History 5 / 5
------------End-----------
e-b. CLEAR HISTORY e-b. CLEAR HISTORY

When this menu is selected, the history of
protection function is initialized and Protection Protection History Cleared !
History Cleared ! is displayed.
e-h. Help e-h. Help

e-m. Diag Menu e-m. Diag Menu

NS-WSW40
50
f. POWER-OFF HISTORY f. POWER-OFF HISTORY

This menu is used to display the history of power-off
factor.
Sub-menu screen /
f
--- Power Off History ---
a:OUTPUT HISTORY
b:CLEAR HISTORY
h:Help
m:Diag Menu
-------------------------
f-a. OUTPUT HISTORY f-a. OUTPUT HISTORY

The history of power-off factor is displayed.
* Numeric values in the figure are given as
reference only.
a
--- Power Off History ---
1. PWR DOWN
2. PROTECT
3. SLEEP
4. PANEL KEY
5. REMOCON
-----------End-----------
Power-off factors are as follows.

PWR DOWN: Power down PWR DOWN
PROTECT: Protection PROTECT
SLEEP: SLEEP timer SLEEP
PANEL KEY: (Power) key of this unit PANEL KEY
REMOCON: (Power) key REMOCON
on remote control NO SIGNAL
NO SIGNAL: No signal NO OFF
NO OFF: No history
f-b. CLEAR HISTORY f-b. CLEAR HISTORY

When this menu is selected, the history of
power-off factor is initialized and Power Off Power Off History Cleared !
History Cleared ! is displayed.
NS-WSW40
f-h. Help f-h. Help

f-m. Diag Menu f-m. Diag Menu

51
g. SWEEP TEST g. SWEEP TEST

Not for service.
Sub-menu screen /
g
--- SWEEP Test ---
m Menu
------------------
:<system>Input Change: TV
(OPT2)
:<system>Program Change: STEREO
:<system>Volume: 22
:<system>SW Level: +0
h. HELP h. HELP
i. EMC TEST i. EMC TEST

Not for service.
Sub-menu screen /
i
--- EMC Test ---
a:EMC TEST ON
b:DAMP MUTE
c:DAMP POWER DOWN
d:AW DIRECTION
h:Help
m:Diag Menu
----------------
j. DTS TEST j. DTS TEST

Not for service.
Sub-menu screen /
j
--- DTS Test ---
a:L=NORMAL, R=NORMAL
NS-WSW40
b:L=LF, R=RF
c:L=LS, R=RS
d:L=CENTER, R=NONE
e:L=LF, R=LS
f:L=RF, R=RS
h:Help
m:Diag Menu
----------------
52
k. FACTORY PRESET k. FACTORY PRESET

This menu is used to reserve/inhibit initialization of the ICEEPROMDIGITAL P.C.B. IC2
back-up IC (EEPROM: IC2 on DIGITAL P.C.B.).
Sub-menu screen /
k
--- Factory Preset ---
a:INHIBIT
b:RESERVE
c:F/W INFORMATION
h:Help
m:Diag Menu
----------------------
k-a. PRESET INHIBIT (Initialization inhibited) k-a. PRESET INHIBIT

Initialization of the back-up IC is not executed. IC
Select this sub-menu to protect the values set
by the user.
When this menu is selected, Factory Preset Factory Preset has
has been cancelled is displayed. been cancelled
a
Factory Preset has been cancelled
k-b. PRESET RESERVE (Initialization reserved) k-b. PRESET RESERVE

Initialization of the back-up IC is reserved. IC

(Actual initialization is executed when the power
is turned on next.)
To reset to the original factory settings or to IC
reset the backup IC, select this sub-menu
and press the (Power) key to turn off the
power. Please turn o the
When this menu is selected, Please turn off power...
the power... is displayed.
b
Please turn off the power... YAS-CU201/ATS-CU2010/
NS-WSW40
53
k-c. FIRMWARE INFORMATION k-c. FIRMWARE INFORMATION

The model name, destination, firmware version
and checksum of this unit are displayed.
c
Model YAS-201
Dest UC
Main Version C0294
TI Version 01.02r
AW Version 03.00.00
Total Check Sum 0xe150
Model: The model name is displayed. Model

Dest: The destination is displayed. Dest
UC, TKAFLH, BG, V J
Main Version: The firmware version of Main Version DIGITAL P.C.B.
microprocessor (IC1 on IC1
DIGITAL P.C.B.) is displayed.
TI Version: The firmware version of TI Version DSPTIDIGITAL P.C.B.
DSP (TI, IC104 on DIGITAL IC104
P.C.B.) is displayed.
AW version: The firmware version of AW
(AirWIred, AWCD2A P.C.B.) AW version AWAirWiredAWCD2A
is displayed. P.C.B.
Total Check Sum: The checksum value is
displayed.
Total Check Sum

k-h. Help k-h. Help

k-m. Diag Menu k-m. Diag Menu

NS-WSW40
54
IC DATA
IC1: TMPM330FDFG (DIGITAL P.C.B.)
32-bit RISC microprocessor
* No replacement part available. /
I/F FLASH
Cortex-M3 I-Code
AHB-Bus-Matrix
microprocessor
D-Code I/F RAM
Debug System
NVIC I/F BOOTROM
Bus Bridge
CG PORT A to K
SIO/UART (3ch) TMRB (10ch)

I/O-Bus
I2C/SIO (3ch) WDT
CEC RTC
RMC (2ch) ADC (12ch)

98 TB6IN1/AIN7/PD3
97 TB6IN0/AIN6/PD2
96 TB5IN1/AIN5/PD1
95 TB5IN0/AIN4/PD0
88 TB6OUT/PJ4
85 TB3IN1/PH7
83 TB4IN1/PI7
79 TB4IN0/PI6
89 RXIN0/PE3
100 AIN9/PD5
99 AIN8/PD4
94 AIN3/PC3
93 AIN2/PC2
92 AIN1/PC1
91 AIN0/PC0
84 TB3IN0
76 RVDD3
82 RESET
90 TEST4
81 MODE
87 INT3
86 INT2
80 NMI
78 XT2
77 XT1
AIN10/PD6 1 75 RVSS
AIN11/PD7 2 74 X1
AVSS 3 73 DVSS
VREFH 4 72 X2
AVDD3 5 71 DVDD3
INT4 6 70 INT0
TB9OUT/PK2 7 69 PA7
TB7OUT/PJ5 8 68 PA6
TB2IN0/PH4 9 67 PA5
TB2IN1/PH5 10 66 PA4
TB8OUT/PG7 11 65 PA3
[Main u-com]
TEST2 12 64 PA2
DVSS 13 TMPM330FDFG(B) 63 DVSS
DVDD3 14 62 DVDD3
IC1
SDA2/SO2/PG4 15 61 PF3
SCL2/SI2/PG5 16 60 PB2
SCK2/PG6 17 59 PB1
TEST1 18 58 INT7
INT5 19 57 TEST3
TXD0 20 56 SWCLK
RXD0 21 55 SWDIO
NS-WSW40
CTS0/SCLK0/PE2 22 54 SWV
TXD1 23 53 PI5/TB5OUT
RXD1 24 52 PI4/TB4OUT
CTS1/SCLK1 25 51 PK1/SCOUT/ALARM
AIN10/PD6 26
AIN11/PD7 27
AVSS 28
VREFH 29
AVDD3 30
INT4 31
TB9OUT/PK2 32
TB7OUT/PJ5 33
TB2IN0/PH4 34
TB2IN1/PH5 35
TB8OUT/PG7 36
TEST2 37
DVSS 38
DVDD3 39
SDA2/SO2/PG4 40
SCL2/SI2/PG5 41
SCK2/PG6 42
TEST1 43
INT5 44
TXD0 45
RXD0 46
CTS0/SCLK0/PE2 47
TXD1 48
RXD1 49
CTS1/SCLK1 50
55
Pin Function Name I/O

Port Name Detail of Function
No. (P.C.B.) PowerOn Standby
1 AIN10 PRV_1.2 AD HiZ Protection power supply voltage detection +1.2D
2 AIN11 PRV_3.3 AD HiZ Protection power supply voltage detection +3.3D
3 AVSS AVSS
4 VREFH VREFH
5 AVDD3 AVDD3
6 INT4 DAMP_N_OTW IRQ O DAMP overheat protection
7 PK2 SW_N_MUTE O O Relay ON/OFF control output
8 PJ5 DAMP_N_MUTE O O Outside SW output mute
9 PH4 DAMP_N_PDN O O PWM_MOD power down signal output
10 PH5 DAMP_N_RST O O PWM_MOD reset signal output
11 PG7 PGOOD I I Power good signal
12 TEST2
13 DVSS DVSS
14 DVDD3 DVDD3
15 SDA2 PWM_SDA SIO O PWM_MOD I2C data input and output
16 SCL2 PWM_SCL SO O PWM_MOD I2C clock output
17 SCK2
18 TEST1
19 INT5 DAMP_N_SD IRQ O DAMP overcurrent protection
20 TXD0 FLASH_TXD SO SO FLASH UART (asynchronous communication) mode data output
21 RXD0 FLASH_RXD SI SI FLASH UART (asynchronous communication) mode data input
22 PE2
23 TXD1 AW_TX AW UART (asynchronous communication) mode data output
24 RXD1 AW_RX AW UART (asynchronous communication) mode data input
25 SCLK1
26 SO0 E2P_MOSI SO SO E2P ROM synchronization data output
27 SI0 E2P_MISO SI SI E2P ROM synchronization data input
28 SCK0 E2P_SCK SO SO E2P ROM synchronous clock output
29 PB3 E2P_CS O O EEP ROM chip select
30 BOOT FLASH_N_BOOT I I FLASH single boot mode input / Single boot mode at L
31 PH1 DSP_N_SPIRDY I O DSP SPIRDY input
32 PH2 DSP_N_CS CS O DSP chip select output
33 TXD2 DSP_MOSI SO O DSP synchronization data output
34 RXD2 DSP_MISO SI O DSP synchronization data input
35 SCLK2 DSP_SCK SO O DSP synchronous clock output
36 PH3
37 PB4
38 PI0 DSP_MUTE O O DSP mute output
39 INT6 DSP_N_INIT IRQ O DSP interrupt (Bit symbol: INT9)
40 PI1 DSP_N_RST O O DSP initial clear output
41 PB5 DIR_LRCK I I Clock for CDDA
42 PI2 DIR_SDO I I Data for CDDA
43 PB6 AW_TX_EN O O AW I2S output mode
44 SO1 DIR_MOSI SO O DIR synchronization data output
45 SI1 DIR_MISO SI O DIR synchronization data input
46 SCK1 DIR_SCK SO O DIR synchronous clock output
47 PB7 DIR_N_CS CS O DIR chip enable output
48 PI3 DIR_N_RST O O DIR reset output
49 INT1 DIR_N_INIT IRQ O DIR interrupt input
50 PK0 AW_RX_EN O O AW I2S input mode

51 PK1 IN1_LED O O INPUT1 LED ON/OFF control output
NS-WSW40
52 PI4 MODE_SEL1 I I Terminal 1 for inspection mode distinction

53 PI5 MODE_SEL2 I I Terminal 2 for inspection mode distinction
54 SWV SWD_SWV SO SO SWD SWV
55 SWDIO SWD_IO SIO SIO SWD data input and output
56 SWCLK SWD_SCK SIO SIO SWD clock input and output
57 TEST3
58 INT7 AW_GPIO1 IRQ IRQ AW GPIO input
59 PB1 IN2_LED O O INPUT2 LED ON/OFF control output
60 PB2 SUR_LED HiZ O SURROUD LED ON/OFF control output
56
PIN CONNECTION DIAGRAMS

Pin Function Name I/O ICs
Port Name Detail of Function
No. (P.C.B.) PowerOn Standby
61 PF3 UNI_LED HiZ O Clear Voice LED ON/OFF control output BD9876EFJ-E2 DIX9210PTR D70YE101BRFP266 KIA7805PI KIA7812API L6566BTR
62 DVDD3 DVDD3 BD9328FJ 108 73
14
63 DVSS DVSS 36 25 109 72 28
64 PA2 CV_LED HiZ O Univolume LED ON/OFF control output 37 24 1
65 PA3 DEC_LED1 HiZ O Decode LED ON/OFF control output

M12L16161A-7TG2Q
66 PA4 DEC_LED2 HiZ O Decord LED ON/OFF control output
67 PA5 PL2_LED HiZ O Pro Logic2 LED ON/OFF control output 8 4
48 13 IN IN 25
1
68 PA6 IN3_LED O O INPUT3 LED ON/OFF control output COM
OUT COM
OUT
50
1 12 144 37
69 PA7 AW_LED O O AW LED ON/OFF control output 1 36 1
70 INT0 PSW_N_INT IRQ IRQ Power ON/OFF SW detection interrupt input
71 DVDD3 DVDD3 NJM2904M (TE3) NJM431U NJM4580E PCM1780DBQR R1154H033B-T1-FE R1EX25032ASA00A R3116N271A-TR-F RP132S121B-E2-FE
72 X2 X2
1
73 DVSS DVSS 4
1 6
2 5
3 3 3 3
74 X1 X1 8 4
8
5
8 4
1: REFERENCE 8 4 16 1 1
1
75 RVSS RVSS 1 2: ANODE
1 1
4
3: CATHODE
76 RVDD3 RVDD3
77 XT1 XT1 TAS5342LDDV TAS5086DBT TC74VHC244FT TC7SH02FU TC7W14FK TMPM330FDFG UPC1943T
TC7SH08FU TC7WH34FK 75 51
78 XT2 XT2 (TE85L,F) 76 50
38 20
79 PI6 IR_MUTE O O IR MUTE signal (H = MUTE)
22 2
80 /NMI NMI 10 4
5 1
81 MODE MODE 3 8 4 2
3
20
1
82 /RESET uCOM_N_RESET Reset 44
1
1
100 26 1: REFERENCE
2: ANODE
83 PI7 IR_PON O O IR pass circuit ON/OFF signal 1
1 19 3: CATHODE
1 25
84 TB3IN0 REM_INT I I Remote control input
85 PH7 AW_PON S5 (AW power supply) ON/OFF signal
86 INT2 REM_INT IRQ IRQ Remote control input
87 INT3 PDET IRQ IRQ Detection interrupt without AC Diodes
88 PJ4 P-CON O O Relay ON/OFF control output
89 PE3 1SS355VMTE-17 D1FK60-5063 D1NL20U-5083 HZU12B2 TRF-E P6KE200A RB051L-40 RB500V-40
HZU15B3 TRF-E
90 TEST4 HZU22B2 TRF-E
91 AIN0 KEY AD AD KEY input Anode Anode HZU6.2B3 TRF-E Anode Anode
Anode Anode
92 AIN1 DEST AD AD Model detection Anode
93 AIN2 PRI AD HiZ Protection overcurrent detection

Cathode
94 AIN3 Cathode Cathode Cathode Cathode Cathode Cathode
95 AIN4
RF2001T2D RR264M-400TR RS1505M-B-C-J82 S1NB60 1.0A 600V STTH110A TS4B03G C2
96 AIN5 RS605M-B-C-J81
97 AIN6
98 AIN7 PRV_19 AD HiZ Protection power supply voltage detection +19V Anode
99 AIN8 DC_PRT AD HiZ Protection amplifier DC detection Anode
100 AIN9 PRV_12 AD HiZ Protection power supply voltage detection +12D 2
AC
Cathode AC Cathode
AC + AC
1 + AC AC
2 +
3 1 3
Key detection for A/D port

Key input (A/D) pull-up resistance 10 k-ohms
0 +4.3 k +6.8 k open Transistors
Detected voltage value 0 0.853 1.177
3.3 V 2SA1037K 2SA1162-Y(TE85R, F) 2SA1312-GR,BL 2SA949 2SC2411K Q,R 2SC2412K 2SC2712-Y (TE85R, F) 2SC3906K DTC044EUBTL
at 91 pin 0.344 V 1.164 V 1.494 V 2SC2229 2SD2704 K
A/D value
0 27 66 90 91 155 255 C
(3.3 V=255) C C C C C C 3
E E 1: IN
KEY INPUT VOLUME + VOLUME Key off B
E E E
E E
1
2
2: GND
B B B B
B B 3: OUT
E
Destination detection for AD port C
B
Pull-up resistance 10 k-ohms
DTC114EKA IPA90R500C3 KRA102S-RTK/P KTA1046-Y-U/PFY RZR020P01TL SPA21N50C3 STD01P STD01N
6.8 k 10 k 15 k 39 k open KRA302-RTK/P KTC2026
KRC401-RTK/P
Detected voltage value KRC402-RTK/P
1.156 1.485 V 1.486 1.815 V 1.816 2.145 V 2.476 2.805 V 3.136 3.3 V KRC404-RTK/P
at 92 pin 3 D
1 1: GND OUT S
A/D value 2: IN
89 115 116 140 141 166 191 217 242 255 2 3: OUT G 1
23 1
23
(3.3 V=255) GD
COMMON
BC GD 45 45
S E S
IN
DEST U, C J V T, K, A, F, L, H B, G
57
A B C D E F G H I J
1 BLOCK DIAGRAMS YAS-CU201/ATS-CU2010

DIGITAL Section Block Diagram
P.C.B._DAMP
r 4FFQBHF
r 4FFQBHF r 4FFQBHF
DAMP
INPUT DIGITAL SCHEMATIC DIAGRAM
SCHEMATIC DIAGRAM SCHEMATIC DIAGRAM
XL101
24.576MHz
2
P.C.B._INPUT P.C.B._DIGITAL MCLK
39 40 IC502
IC104 IC503
IC101 PWM Amplifier
DSP 39
DIR TAS5086DBT
D70YE101BRFP266 TAS5342LDDV
DIX9210PTR LC FRONT L
33 20 2 AHCLKX0/ 1 L 6 36
TV RX2 RMCK
AHCLKX2 142 BCK 20
PWM1 PWM_A
ACLKX0 SCLK
35 19 139 37 R 16 DRIVER
BD/DVD RX1 RBCK ACLKR0 144 LRCK 19
PWM2 PWM_C
31
AFSX0 LRCK
18 141
RLRCK AFSR0 117 L/R LC FRONT R
26 28
AWCD2A P.C.B. IC103 GPIO0
17 130 AXR0[3] SDIN1
RDATA AXR0[10] 116 SW
XL10 TC74VHC244FT GPIO1 15 17 AXR0[2] SDIN2
XMCK CLKIN
3
GPIO2
AirWired
IC105 P.C.B._POWER (4)

GPIO3 16M SDRAM
M12L16161A-7TG2 IC106
IC801
2 TC7WH34FK TV remote control
SDT0 18
U801
IR sensor
POWER (4)
TC7SH02FU r 4FFQBHF
SCHEMATIC DIAGRAM
XL1 TV remote control

10MHz
D831 signal transmitter POWER (5)
T701 D710 r 4FFQBHF
Power Detect SCHEMATIC DIAGRAM
4 P.C.B._POWER (5)
C702 Circuit 72 74
IC1
INPUT Vol- Vol+ Power
C701 C704 D709 Microprocessor Panel keys
AC IN D712
IC3 TMPM330FDFG
82
S6 Reset IC RESET
F701 L702 C703 L703
R3116N271A-TR-F 91
POWER (3)
KEY
r 4FFQBHF
70 SCHEMATIC DIAGRAM
PSW
IC7 P.C.B._POWER (3)
RY701 11
Reset IC PGOOD
51 TV indicator
R3116N271A-TR-F IN1_LED
D861
59 BD/DVD indicator
5 IN2_LED
D862
PDET
Q703 68 YIT indicator
IN3_LED
D863
P-CON
D702 65
DEC_LED1 DTS indicator
DEST AAC
IC702 66
DEC_LED2 D867 J model
IC701 SUR_LED
60 SURROUND indicator
PWM D864
64 UNIVOLUME indicator
Control UNI_LED
IC2 D866
L705 EEPROM 61 CLEAR VOICE indicator
L6566BTR +19V
CV_LED
D865
R1EX25032ASA00A
67 indicator
PL2_LED
Q701 L704 D868
6 69 SUBWOOFER indicator
AW_LED
D869
CB2
RXDF 86
L706 D713 Writing port U861 Remote control
IR
sensor
TXDF REM_INT 84
D707
learn
P.C.B._POWER (1) remote control POWER (2)
r 4FFQBHF
T702 SCHEMATIC DIAGRAM
P.C.B._POWER (2)
r 4FFQBHF
POWER (1)
7 SCHEMATIC DIAGRAM
58
A B C D E F G H I J
1 YAS-CU201/ATS-CU2010
Power Supply Section Block Diagram
2 P.C.B. POWER (1)

r 4FFQBHF P.C.B. DAMP
POWER (1) DAMP
SCHEMATIC DIAGRAM
IC501 r 4FFQBHF
Regulator
SCHEMATIC DIAGRAM
+19V +19V KIA7812API
W701 CB501 +12D
IC503
Digital Amplifier
P.C.B. DIGITAL r 4FFQBHF Power Stage
PDET Circuit DIGITAL TAS5342LDDV
SCHEMATIC DIAGRAM
T702
3 Sub-
Transformer
S3.3 S3.3 IC8 Q1 IC2
Regulator FET Switch EEPROM
S6 S6 S6 BD9328FJ S5 RZR020P01TL R1EX25032ASA00A IC502
W702 CB106 S5 Digital Amplifier
+19V +19V Processor
IC1 TAS5086DBT
Microprocessor +12D +12D IC506
P-CON TMPM330FDFG CB102 CB503 Op-Amp
+3.3D +3.3D DC protection
NJM2904M
IC3
4 T701 Reset IC
Power R3116N271A-TR
Transformer
+26D P.C.B. POWER (2)
IC5 IC7 U861
Regulator Reset IC Remote Control
R1154H033B-T1-FE R3116N271A-TR Sensor
S3.3 GP1UE261RKVF
D861D863
Input LED
S3.3 S3.3
W2 CB861
+3.3D +3.3D
5 IC201 IC202 D864D869
Regulator Regulator Status LED POWER (2)
BD9876EFJ-E2 +3.3D RP132S121B +1.2D r 4FFQBHF
+3.3D +1.2D
SCHEMATIC DIAGRAM
IC104
DSP P.C.B. INPUT P.C.B. POWER (4)
D70YE101BRFP266 CB304 CB801 U801
INPUT IR Repeater
r 4FFQBHF S5_IR S5_IR TSOP98238
IC105 SCHEMATIC DIAGRAM
SDRAM
M12L16161LA-7TG2Q Q302
6 FET Switch
RZR020P01TL LED Drive Circuit
IC101 POWER (4)
DIR r 4FFQBHF
DIX9210PTR U301,U302
SCHEMATIC DIAGRAM
INPUT
Optical/Coaxial
GP1FAV51RK0F
Q304 CB301
CB101 CB305 FET Switch
S5 S5 RZR020P01TL To AW card
59
A B C D E F G H I J
1 NS-WSW40
POWER AMPLIFIER
IC601 IC2A Q36, 8, 1012, 18
+5V DAC 2 1 IC1A IC1B
2 - 3 +B
PCM1780DBQR + 1 5
+ + 7
- LIMITER - RY1
2 -
3 6 +
D4, 5
r 4FFQBHF DRIVER
DAC + SUBWOOFER
SCHEMATIC DIAGRAM
-B
L.P.F
3 L.P.F H.P.F
-6dB/oct
-12dB/oct -12dB/oct YST
R61
+B
PROTECTION
-B
Q7, 9, 13, 20
4 AirWired
+5V
T2 F1
AWCD2B P.C.B.
+15V Q1, D6
RY2
GROUP ID SWITCH POWER
SW1, 2 REGULATOR SUPPLY AC IN
LINK indicator
5 D1
-15V Q2, D7 D3
D15 T1
to RY2
IC3 LINE
+5V REGULATOR POWER FILTER
KIA7805PI SUPPLY
6 L2
D14
MAIN r 4FFQBHF
SCHEMATIC DIAGRAM
60
A B C D E F G H I J
1 PRINTED CIRCUIT BOARDS YAS-CU201/ATS-CU2010
DAMP
DAMP_N_MUTE
(CB503)
DAMP_N_RST
DAMP_N_SD
DIGITAL DIGITAL
H_DIR_MCK
(Side A) (Side B)
PWM_SDA
5086_BCK
GND(5086_SW) 5086_LR
DC_PRT
DGND
+12D
GND
DAMP_N_OTW
DAMP_N_PON
SW_N_MUTE
5086_LRCK
PWM_SCL
POWER (1)
(W702)
P-CON
2
+3.3D
DEST
PDET
+19V
GND
GND
GND
GND
GND
GND
S3.3
PRI
S6
CB1
CB102
25 1
6 4
3 5 4 IC202
IC201
IC105
8 1 1 3
26 50
1 8 108 73 No replacement part available.

109 72
IC8
4 5
3 1
IC7
IC104 4 5
4
1
5
IC5
IC106
4 144 8 5
3 37
1 36 1 4 Semiconductor Location
Ref no. Location
25 1 D1 B4
26 100
D4 H4
D5 H4
CB2
4 1 Writing port
10 1 IC1
D201 B3
IC2
25 24 13 D202 C3
12
D203 B3
IC101
5 4 3 5 8 IC103 50 76
IC3
5 1 11 20 36
51 75 IC1 H5
1
37 48 IC2 C5
4 3 IC3 B5
IC4
8 5
IC6
5 1 IC4 B5
14
IC5 B4
IC6 B5
IC7 H4
IC8 B4
CB104
CB103 IC101 D5
IC103 C5
6 IC104 D4
No replacement part available. IC105 D3
DEC_LED2
DEC_LED1
SUR_LED
IR_N_MUTE
PL2_LED
PSW_N_INT

UNI_LED
AW_LED
CV_LED
IC106 G4
AW_GPIO1
AW_PON
+3.3D
IC201 B3
AW_TX
LRCLK
MCLK
BCLK
OPT2
SDTI
GND
IC202 C3
Q1 B5
Q2 B5
Q3 B5
Q4 H5
GND
REM_INT
IN1_LED
IN2_LED
IN3_LED
S3.3
GND
GND
S6
IR_PON
GND
AW_RX
GND
GND
GND
GND
GND
SDTO
KEY
OPT1
Q5 H5
7
INPUT POWER (2)
(CB305) (CB861)
61
A B C D E F G H I J
INPUT (Side A)
POWER (3)
(CB841)
KEY
GND
BD/DVD TV PSW_N_INT
2
W301
OPT1
OPT2
DGND
AW_PON
KEY
PSW_N_INT
SDTO
LRCLK
DGND
BCLK CB305
DGND
MCLK
DGND W303
SDTI
DGND
AW_GPIO1
AW_RX
3 AW_TX
DGND
IR_N_MUTE
IR_PON
DGND
CB304
S5
CB301
DIGITAL
(CB104)
UART_TX
UART_RX
GPIO0
SDTI
MCLK
BCLK
SDTO
D-
D+
P5V
S5_IR
GND
DGND
GPIO1
RESET_N
DGND
DGND
LRCLK
DGND
DGND
DGND
IR_OUT
GND
IR_OUT
IR_MUTE
GND
4
POWER (4) POWER (5) AWCD2A
(CB801) (CB831)
(CB101)
INPUT (Side B)
Semiconductor Location
Ref no. Location
Q301 E6
Q302 E6
6 Q303 F6
Q304 D5
Q305 E5
62
A B C D E F G H I J
DIGITAL
(CB102)
DAMP_N_MUTE
DAMP_N_RST
DAMP_N_SD
PWM_SDA
5086_BCK
DAMP (Side A) DAMP (Side B)
DIR_MCK
5086_LR
DC_PRT
+12DD
DGND
DGND
DAMP_N_OTW
DAMP_N_PON
SW_N_MUTE
5086_LRCK
PWM_SCL
5086_SW
DGND
DGND
DGND
DGND
+3.3D
2
CB503
DGND
CB501
19 1
3 DGND
+19D IC502 8 5
+19D 20 38
IC506
OUT COM IN
POWER (1) 1
(W701) 4
IC501
22 1
4 IC503
23 44
5
Ref no. Location
D501 H3
IC501 C4
IC502 C3
IC503 D4
IC506 D3
CB505
SP_L+
SP_L-
SP_R+
SP_R-
Note:
7 FRONT L
Since the speaker output of this unit is BTL connected, the ground side of the BTL
DRIVER
measuring instrument to be connected to the speaker terminal MUST be kept in
FRONT R
floating condition.
63
A B C D E F G H I J
POWER (1) (Side A)
2
+19V
GND
PRI
S3.3
DIGITAL GND
(CB1) DEST
P-CON
PDET
S6
T, K, A, B, G, F, L, H models U, C, V, J models
3
W702
CB701
AC IN
CB702
4
CB703
GND
GND
W701
+19V
+19V
DAMP
(CB501)
5 IC702
U, C, V, J models U, C, V, J models
5 k-ohms T, K, A, B, G, F, L, H models
10 W
6 Semiconductor Location
Safety measures
Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures during servicing, such Ref no. Location
as wearing insulating gloves. D702 G5
Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge remains and a
high voltage continues to exist there. Before starting any repair work, connect a discharging resistor (5 k-ohms/10 W) to the terminals D703 E5
of each capacitor indicated below to discharge electricity. The time required for discharging is about 30 seconds per each. D706 E4
C713 on POWER (1) P.C.B. D707 E4
D708 E4
D712 F3
OFF
5 k /10 W 30 D713 C4
POWER1P.C.B. C713 IC702 D5
Q701 E4
7
64
A B C D E F G H I J
POWER (1) (Side B)
U, C, T, K, A, F, L, V, H, J models T, K, A, B, G, F, L, H models
8 1
IC705 IC701
5 IC703
R AK 9 16
R AK
6 Semiconductor Location
Ref no. Location Ref no. Location
D704 D5 IC701 D5
D705 D4 IC703 B5
D709 G3 IC705 C5
D710 E3 Q702 E3
D715 F3 Q703 F3
D720 E3 Q704 E3
D721 F3 Q705 D3
65
A B C D E F G H I J
POWER (2) (Side A)
DIGITAL
(CB103)
REM_INT
IN1_LED
IN2_LED
IN3_LED
GND
GND
GND
S3.3
2
AW_LED
+3.3D
PL2_LED
DEC_LED2
DEC_LED1
UNI_LED
CV_LED
SUR_LED
Ref no. Location
D831 J6
CB861 D861 G3
3 D862 G3
D863 F3
D864 F3
D865 E3
D866 E3
D867 D3
D868 D3
Remote control SUBWOOFER UNIVOLUME CLEAR VOICE SURROUND YIT BD/DVD TV D869 C3
sensor indicator indicator DTS indicator indicator indicator indicator indicator indicator
AAC
indicator
J model
4
POWER (3) (Side A) POWER (4) (Side A) POWER (5) (Side A)
INPUT
5 (W301)
STBY_SW
GND
KEY
TV remote control
CB841 sensor
CB831
IR_OUT
GND
GND
CB801
IR_N_MUTE TV remote control
IR_OUT
GND signal transmitter
S5_IR
INPUT
+ VOLUME - INPUT (W303)
(Power) INPUT
(CB304)
66
A B C D E F G H I J
POWER (2) (Side B)
Ref no. Location
IC801 F6
Q801 F6
Q861 G3
Q862 F3
3 Q863 F3
Q864 E3
Q865 E3
Q866 D3
Q867 D3
Q868 D3
Q869 C3
Q870 C3
POWER (3) (Side B) POWER (4) (Side B) POWER (5) (Side B)
IC801
1 5
3 4
67
A B C D E F G H I J
1 NS-WSW40
Safety measures
Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures during servicing, such
as wearing insulating gloves. OFF
Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge remains and a 5 k /10 W 30
high voltage continues to exist there. Before starting any repair work, connect a discharging resistor (5 k-ohms/10 W) to the terminals MAIN1P.C.B. C23C24
of each capacitor indicated below to discharge electricity. The time required for discharging is about 30 seconds per each.
C23, C24 on MAIN (1) P.C.B.
MAIN (1) (Side A) 5 k-ohms MAIN (2) (Side A)

10 W
AC IN
2
W9A
DGND
CB8
CB1
CB4
P-CON
+5V
CB7
CB2
3 W5B3
W5B2 IC3
W8A
+ W2A W2B
OUT COM IN
W5B1
RE
DRIVER
SUBWOOFER WH
-
4 Sub-transformer
CB23
MAIN
AGND
+15
-15
DGND
5 k-ohms
10 W
MAIN (3) (Side A) Group ID switch MAIN (4) (Side A)

5
(Reset) 21 CA
(For factory) Power
(Writing port)
CB6
transformer
CB5
Semiconductor Location WH
W9B
Ref no. Location RE
W5A3
LINK D1 E6
indicator D3 F3
D14 J3
IC3 J3 BL
W5A2
6 Q1 D4
W4
Q2 D4
RX
W6
W1
TX MAIN Q14 E3 BE
W3
AGND
W8B
RST
DGND +15 Q15 D3 RE
W5A1
-15
DGND Q18A D3
DAC (1) Q18C E3
(CB603)
Q25 I2
+5V
DGND DGND
P-CON P-CON
LED-ON +5V
DAC (1) 1/2
7 (CB604) A/C
DGND
AGND
SIG
68
A B C D E F G H I J
1 NS-WSW40
MAIN (1) (Side B) MAIN (2) (Side B)
MAIN (3) (Side B) MAIN (4) (Side B) Ref no. Location Ref no. Location
5 D2 E4 Q5 C4
D4 B4 Q6 D3
D5 B4 Q7 B3
D6 D4 Q8 C4
D7 D4 Q9 B3
D8 C4 Q10 C3
D9 D3 Q11 D3
D10 D3 Q12 C3
D11 B3 Q13 B3
D12 B2 Q16 D3
D13 B2 Q17 C3
6 5 4
D15 I3 Q20 B3
IC2
5 4
IC1
8 1
8 1 D16 H3 Q21 C3
D17 H3 Q22 C2
IC1 D6 Q23 D6
IC2 C6 Q24 I3
Q3 C4 Q26 I2
Q4 C4
T, K, B, G, F models
69
A B C D E F G H I J
1 NS-WSW40
DAC (1) (Side A) DAC (1) (Side B)

MAIN (3)
(W6) MAIN (3)
LED_ON
(W1)
P-CON
DGND
DGND
DGND
AGND
RST
+5V
SIG
A/C
RX
1/2
TX
CB604 CB603
2
(For service)
CB605
16 9
IC601
1 8
3
CB602
Ref no. Location
UART-TX-D
DGND
UART-RX-D D601 C2
VPP
DGND
SCL-EEP
IC601 C3
CB601
SDA-EEP
SCL SDA Q601 C3
GPIO5 GPIO4 Q602 C3
GPIO6
GPIO7 Q603 C3
GPIO8
GPIO9
4 ANA_IN
DGND Q604 D3
Q605 H2
AWCD2B Q606 H3
TX
SW_N_MUTE
RST
DGND
DGND
P5V
LRCLK
5
RX
A/C
SDTI
DGND
MCLK
BCLK
DAC (2) (Side A) DAC (2) (Side B)
AWCD2B
LRCLK
GPIO1
DGND
DGND
DGND
DGND
DGND
DGND
RST
GPIO0
SDTO
MCLK
BCLK
SDTI
P5V
RX
D+
TX
D-
6
CB651
CB652
TX
SW_N_MUTE
RST
DGND
DGND
P5V
LRCLK
RX
A/C
SDTI
DGND
MCLK
BCLK
70
A B C D E F G H I J K L M N
SCHEMATIC DIAGRAMS YAS-CU201/ATS-CU2010
DIGITAL 1/2
1 S5
5.0
S6
1
C103 AW_RX_EN
GND 0.1/16(F)
2
AW_TX_EN
IR_PON
3
IR_PON
IR_N_MUTE
4
IR_N_MUTE
CB104
GND u-com I/F
5
AW_TX
6
AW_TX
AW_RX +3.3D
DSP_MISO
7
AW_RX
DSP_SCK
DSP_MUTE
DSP_MOSI
DSP_N_CS
DSP_N_INT
DSP_N_SPIRDY
AW_GPIO1
8
AW_GPIO1
TC74VHC244FT
GND
9
IC103
SDTI 2A1 GND
GND
20 19 18 17 16 15 14 13 12 11
10
23 22 21 20 19 18 17 16 15 14 13 12 11 10
Page 73 L6 GND 1Y4 2Y1
9
R142
0.1/16(F)
MCLK 2A2 1A4
to INPUT_CB305
C196
8
GND R143 10 1Y3 2Y2
150601123K3
7
2 BCLK 47 2A3 1A3 CB102
6
DGND
GND R144 1Y2 2Y3 1
5
+3.3D 3.3
LRCLK 47 2A4 1A2 GND 2
4
DC_PRT
SDTO R145 1Y1 2Y4 DC_PRT 3
3
DAMP_N_OTW
PSW_N_INT 47 2G 1A1 DAMP_N_OTW 4
2
PSW_N_INT DAMP_N_SD
KEY VCC 1G DAMP_N_SD 5
1
KEY GND
AW_PON 6
AW_PON 0.1/16(F) H_DIR_MCK
R149
R148
From/To PCB D-AMP

GND C112 +3.3D_DSP 7
47
47X4
GND
OPT2 10/10 8
1 7 R151 5086_BCK
OPT1 9
C113 3 5 R150 22 5086_LRCK
V+
0.1/16(F)
8 10
22
C114
R154
GND GND
47
6 2 11
+3.3D TC7WH34FK
GND(5086_SW)
12
Page 74 B5
4
IC106 5086_LR
V- 13 to DAMP_CB503
DIR_SCK
From/To 001.sht(CPU)
DIR_N_CS
DIR_MOSI
DIR_MISO
GND
DIR_N_RST
DIGITAL IN GND 14
PWM_SDA
GND PWM_SDA
3 to DIGITAL 2/2
PWM_SCL
PWM_SCL
15
16
R129
DAMP_N_RST
R132 DAMP_N_RST
47
17
47K DAMP_N_PON
DAMP_N_PDN 18
Boot mode: DAMP_N_MUTE
SPI DAMP_N_MUTE 19
SW_N_MUTE
SW_N_MUTE 20
+3.3D R135 +12D 12.0
+12D 21
100/6.3
C122
10/10
10/10
4.7K
C121
0.1/16(F)
GND
C120
C193
R134 22
GND
0.1/16(F)
0.1/16(F)
0.1/16(F)
0.1/16(F)
0.1/16(F)
GND 47KX4
C141
C147
C149
C155
C157
22FMN-BTK-A(LF)
+3.3D GND
C106
R123
R124
10/10
0.1/16(F)
22
22
GND
AXR0[9]/AXR1[4]/SPI1_SIMO
AXR0[8]/AXR1[5]/SPI1_SOMI
GND
RXIN6/ALRCKI0
RXIN4/ASCKI0
RXIN5/ABCKI0
C163
RXIN7/ADIN0
C107 GND
SPIO_SOMI/I2C0_SDA
0.1/16(F)
MS/ADR1
AXR0[15]/AXR2[0]
AXR0[14]/AXR2[1]
AXR0[13]/AXR1[0]
AXR0[12]/AXR1[1]
AXR0[11]/AXR1[2]
AXR0[10]/AXR1[3]
MC/SCL
AXR0[7]/SPI1_CLK
AXR0[6]/SPI1_ENA
AXR0[5]/SPI1_SCS
C116
NOTICE
R116
AHCLKR0/AHCLKR1
VDDRX
RXIN1
RXIN2
RXIN3
(model)
MODE
18P(CH) CAPACITOR
47
RST
R136
4.7K
J JAPAN
REMARKS PARTS NAME
24.576MHZ
SPIO_SIMO
36 35 34 33 32 31 30 29 28 27 26 25
XL101
RXIN0 MDI/SDA U U.S.A

GND
RESISTOR
AXR0[4]
AXR0[3]
AXR0[2]
AXR0[1]
AXR0[0]
37 24 NO MARK ELECTROLYTIC CAPACITOR
4
ACLKX0
ACLKR0
AFSX0
AFSR0
GNDRX MDO/ADR0 C CANADA
DVDD
CVDD
CVDD
DVDD
CVDD
DVDD
C117 R114 38 23 TANTALUM CAPACITOR REMARKS PARTS NAME
VSS
VSS
VSS
VSS
VSS
VSS
VSS
R146
XTI DVDD C110 R GENERAL
DIR
47
15P(CH) 680 39 22 C111 NO MARK CERAMIC CAPACITOR NO MARK CARBON FILM RESISTOR (P=5)
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
XTO DGND 10/10 VSS SPIO_CLK/I2C0_SCL T CHINA
C108
40 21
0.1/16(F) 1 108 CERAMIC TUBULAR CAPACITOR CARBON FILM RESISTOR
(P=10)
R106
10/10 AGND IC101 SCKO 10 AHCLKX0/AHCLKX2 SPIO_SCS/I2C1_SCL K KOREA
C109
41 20 2 107 POLYESTER FILM CAPACITOR METAL OXIDE FILM RESISTOR
0.1/16(F) VCC BCK AMUTE0 VSS A AUSTRALIA
42 DIX9210PTR 19 3 SW 106 POLYSTYRENE FILM CAPACITOR METAL FILM RESISTOR
C104 R104 FILT LRCK
R105
47X4 AMUTE1 FL SPIO_ENA/I2C1_SDA B BRITISH
43 18 4 105 MICA CAPACITOR METAL PLATE RESISTOR
680
0.068/16 VCOM DOUT AHCLKX1 EM_OE
P
G EUROPE
C105
44 17 5 104 POLYPROPYLENE FILM CAPACITOR FIRE PROOF CARBON FILM RESISTOR
0.1/16(F)
AGNDAD MPO1 VSS
[DSP] DVDD L SINGAPORE
J101
45 16 6 103
C182 SEMICONDUCTIVE CERAMIC CAPACITOR CEMENT MOLDED RESISTOR
0
R113
4700P/25(B) VCCAD MPO0 47 C126 ACLKX1 EM_RW 0.1/16(F) E SOUTH EUROPE
46 15 7 102 POLYPHENYLENE SULFIDE FILM SEMI VARIABLE RESISTOR
NC MPIO_B3 CVDD CVDD S V TAIWAN
47 14 8 101 CAPACITOR CHIP RESISTOR
NC MPIO_B2 R120 ACLKR1 EM_CS[2] F RUSSIAN
48 13 9 100
10K C175
1 2 3 4 5 6 7 8 9 10 11 12 DVDD
10 99
VSS P LATIN AMERICA
0.1/16(F) 0.1/16(F)
AFSX1 EM_RAS /EMRAS S BRAZIL
MPIO_A0
MPIO_A1
MPIO_A2
MPIO_A3
MPIO_C0
MPIO_C1
MPIO_C2
MPIO_C3
MPIO_B0
MPIO_B1
C127
NPCM/INT1
+3.3D
R109
ERROR/INT0
11 98
22
AFSR1
12 97
EM_CS[0] /EMCS0 H THAI
VSS EM_BA[0] EMBA0
R107
DSP_RST 13 96
22
5 GND
DSP_N_RST RESET
14
DSP 95
VSS 0.1/16(F)
ERR [DIR] 0.1/16(F) VSS

15 94
EM_BA[1] C176
16 M SDRAM
R138
47X4
C128 CVDD EM_A[10]
16 93
CLKIN DVDD
+3.3D 17 92
0.1/16(F) VSS EM_A[0] EMA10
GND
18 91
C129 C195
145
TMS TMS CVDD EMA0
D70YE101BRFP266
0.1/16(F)
19 90
R118 CVDD EM_A[1] EMA1
X7316B0
IC104
20 89
10K /TRST TRST GND EM_A[2] EMA2
21 88
0.1/16(F) OSCVSS VSS C177
DIR_N_INT VDD VSS
no_use
22 87
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
R139
47X4
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
C124 0.1/16(F)
J1
OSCIN EM_A[3]
23 86 R155 DQ0 DQ15 R157
OSCOUT CVDD EMA3 47X4 47X4
24 85 EMD0 DQ1 DQ14 EMD15
10/10 0.1/16(F) OSCVDD EM_A[4] EMA4 C188 C200
GND 25 84 0.1/16(F) EMD1 0.1/16(F) VSSQ VSSQ 0.1/16(F) EMD14
BLM21PG600SN1D VSS EM_A[5] EMA5
CDDA_SDO C123 C132 26 83 EMD2 DQ2 DQ13 EMD13
L102 PLLHV VSS C178 EMA6
+3.3D 27 82 EMD3 DQ3 DQ12 EMD12
CDDA_LRCK C179
TDI TDI DVDD
28 81 VDDQ VDDQ
0.1/16(F)
R140
47X4
6 DIR_SCK TDO TDO
No replacement part available. EM_A[6]
IC105
DIR_SCK 29 80 R156 DQ4 DQ11 R158
0.1/16(F) VSS EM_A[7] 47X4 47X4
DIR_MOSI EMD4 DQ5 DQ10 EMD11
DIR_MOSI 30
79
REGULATOR DIR_MISO
DIR_MISO
/EMU0
C125 DVDD
EMU[0]
31 78
VSS
CVDD C180
EMA7
EMD5
C187
0.1/16(F) VSSQ VSSQ
C199
0.1/16(F) EMD10 IC202: RP132S121B-E2-FE
+19V
DSP CORE
32 77
0.1/16(F)
EMD6 DQ6 DQ9 EMD9 Voltage regulator
DSP 3.3V IC202 DIR_N_INT CVDD EM_A[8] EMA8
DIR_N_INT 33 76 EMD7 DQ7 DQ8 EMD8
19.0 IC201 +3.3D RP132S121B-E2-F +1.2D
DIR_N_RST /EMU1 0.1/16(F) EMU[1] EM_A[9] EMA9
BD9876EFJ-E2 DIR_N_RST 34 75 VDDQ VDDQ
FBMJ2125HS250NT
D202 DIR_N_CS TCK C130 TCK EM_A[11]

C202 3.3 1.2 DIR_N_CS EMDQM0 LDQM N.C/RFU
35 74
R141
47X4
L201
VSS DVDD
0.01(B) 1SS355VM 36 73 /EMWE WE UDQM EMDQM1 VDD 6 1 VOUT
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
DER7052-220M-RA DSP_N_INT
R119
R121
no_use
VCC LX VDD VOUT DSP_N_INT /EMCAS CAS CLK EMCLK
no_use
8
VSS
VSS
VSS
VSS
VSS
VSS
DVDD
CVDD
DVDD
CVDD
CVDD
DVDD
CVDD
DVDD
EM_WE
EM_CLK
EM_CKE
EM_CAS
EM_D[7]
EM_D[6]
EM_D[5]
EM_D[4]
EM_D[3]
EM_D[2]
EM_D[1]
EM_D[0]
EM_D[9]
EM_D[8]
EM_D[15]
EM_D[14]
EM_D[13]
EM_D[12]
EM_D[11]
EM_D[10]
BST GND L202 GND GND /EMRAS RAS CKE EMCKE
EM_WE_DQM[1]
EM_WE_DQM[0]
R201
4.7K
R203
7
DSP_SCK
62K
M12L16161A-7TG2
EN VC R205 CE NC DSP_SCK /EMCS0 CS N.C
C181
6
4.7K DSP_MOSI 0.1/16(F)

SYNC FB DSP_MOSI EMBA0 BA A9 EMA9
5
DSP_MISO
DSP_MISO EMA10 A10/AP A8 EMA8
G
6800P/25(B)
DSP_N_RST Vref
C203
RB051L-40
0.1/16(F)
0.1/16(F)
DSP_N_RST EMA0 A0 A7 EMA7

100/25
22/6.3
22/6.3
C208
C201
C204
R204
C209
C205
C206
10/25
10/10
D201
C207
27K
DSP_MUTE
DSP_MUTE +1.2D +3.3D EMA1 A1 A6 EMA6 Current Limit
DSP_N_CS
Thermal Shutdown
6.8K
DSP_N_CS EMA2 A2 A5 EMA5

R202
BLM21PG600SN1D
0.1/16(F)
0.1/16(F)
0.1/16(F)
0.1/16(F)
0.1/16(F)
0.1/16(F)
0.1/16(F)
0.1/16(F)
DSP_N_SPIRDY
C140
C144
C146
C152
C154
C160
C162
C166
DSP_N_SPIRDY EMA3 A3 A4 EMA4 CE 4 2,5 GND
BLM21PG600SN1D
VDD VSS
L103
L104
GND +3.3D_DSP
Pin No. Symbol Description

C191 1 VOUT Output Pin
10/10
10/10
0.1/16(F)
C183
C185
IC101: DIX9210PTR GND 2 GND Ground Pin
3 NC No Connection
216-kHz digital audio interface transceiver
100/6.3
220/4
R133
C184
R125 R126 R127 R128
R131
C186
47
47
FILT 47X4 47X4 47X4 47X4 4 CE Chip Enable ("H" Active)
5 GND Ground Pin
43 R122
AUXIN0 DSP debug 47X4 6 VDD Input Pin
/EMU(0)
/EMU(1)
/TRST
AUTO
/EMCAS
EMDQM0
EMDQM1
RXIN7
DGND
/EMWE
EMD15
EMD14
EMD13
EMD12
EMD11
EMD10
EMCLK
EMCKE
GND
TMS
TDI
TDO
TCK
EMD7
EMD6
EMD5
EMD4
EMD3
EMD2
EMD1
EMD0
EMD9
EMD8
RXIN0 RXIN0 DIR DIR SCKO
37 20 16bit Data Bus
RXIN1 RXIN1 XTI DOUT Main BCK
35 PLL 19
RXIN2 RXIN2 AUXIN0 Output LRCK
33 SCKO/BCK/LRCK Port 18
8 RXIN3
32
RXIN3 AUXIN1
17
DOUT
RXIN4/ASCKIO RXIN4 AUXIN2

/TRST
/EMU0
/EMU1
Lock DIR
31 GND
TMS
TDI
TDO
TCK
UnlockXTI
RXIN5/ABCKIO RXIN5 Clock/Data
30
Recovery
RXIN6/ALRCKIO RXIN6
RXIN7/ADIN0
29
RXIN7 AUTO IC105: M12L16161A-7TG2Q IC106: TC7WH34FK (TE85L,F) IC201: BD9876EFJ-E2
28
DIR 16 M-bit (1 M x 16) SDRAM Triple non-inverter High efficient step down DC/DC converter with 3.0A FET
MPIO_A0(CLKST) RXIN8 XTI
3 Lock Detection ON/OFF
MPIO_A1(VOUT) RXIN9 AUXIN0 DIT VCC 1Y 3A 2Y
4 MPIO_A EN
I/O Control
MPIO_A2(XMCKO) RXIN10 AUXIN1 8 7 6 5
5 Selector 6
MPIO_A3(INT0) RXIN11 RECOUT0 AUXIN2 LWE
6
Bank Select Data Input Register VCC
xxxx DITOUT RECOUT1 8
RECOUT0 LDQM TSD UVLO Reference REG
MPO0(TXOUT)
RECOUT1 MPO0/1 15 VDD 1 50 VSS Current
Selector 16
MPO1(VOUT) IC103: TC74VHC244FT IC104: D70YE101BRFP266 DQ0 2 49 DQ15 VREF Sense
Row Decoder
Refresh Counter
DITOUT
Sense AMP
Output Buffer
Floating-point digital signal processors AMP
Octal bus buffer non-inverted 3-state outputs Row Buffer 512K x 16 DQ1 3 48 DQ14
VSSQ 4 47 VSSQ
1 2 3 4 Shutdown
Address Register
DQ2 5 46 DQ13 BST

DQi 7
9 1G 1 20 Vcc
256
Program/Data
RAM
JTAG EMU CLK 512K x 16 DQ3
VDDQ
6
7
45
44
DQ12
VDDQ
1A 3Y 2A GND FB
4 -
Error AMP Current
Comparator
D1 256K Bytes 1.0V + -
Data 64 McASP0 DQ4 8 43 DQ11 + R Q 200 m
32 16 Serializes
+ ohms
R/W Program/Data ADD DQ5 9 42 DQ10 S VOUT
AUTO
1A1 2 19 2G 256 ROM Page1 LX
MPIO_C0(TXSCK) MPIO_B0(ASCKI2) C67x+ Microprocessor 32 VSSQ 10 41 VSSQ 1
DIR 256K Bytes
LCBR
LRAS
7 11 DQ6 11 40 DQ9
Col. Buffer
MPIO_C1(TXBCK) D2 Memory Column Decoder

XTI MPIO_B1(ABCKI2)
2Y4 3 18 1Y1 Soft
8 MPIO_C AUXOUT MPIO_B 12 Data 64 Controller Program/Data 32 DQ7 12 39 DQ8
Start
McASP DMA Bus
MPIO_C2(TXLRCK) MPIO_B2(ALRCKI2) R/W McASP1 10 ohms

Selector AUXIN0 Selector ROM Page2 VDDQ 13 38 VDDQ
9 AUXIN1 AUXIN2 13 256 6 Serializes Oscillator
MPIO_C3(TXDIN) AUXIN1 MPIO_B3(ADIN2)
1A2 4 17 2A4 256K Bytes 32 Latency and Burst Length LDQM 14 37 N.C/RFU 300 kHz
10 14
Program WE 15 36 UDQM GND
I/O INT Fetch Program/Data
LCKE 2
32 McASP2 CAS 16 35 CLK
2Y3 5 16 1Y2 256 ROM Page3
256K Bytes 2 Serializes Programming Register RAS 17 34 CKE
256
XTIClock
32 DIT Only CS 18 33 N.C
3 5
Peripheral Configuration Bus
(SCK/BCK/LRCK) LRAS LCBR LWE LDQM VC SYNC

XTI Divider 1A3 6 15 2A3 LCAS LWCBR BA 19 32 A9
39
Program CSP 32 32
XTO OSC 32 SPI1 A10/AP 20 31 A8
40 Cache 256 A0 30
XMCKO SBCK/SLRCK 2Y2 7 14 1Y3 21 A7
Secondary BCK/LRCK 32K Bytes PMP DMP Timing Register
XMCKO (To MPIO_A and MPO0/1)
Divider
(To MPIO_A)
32 SPI0 A1 22 29 A6
Divider A2 23 28 A5
Selector 32 32
1A4 8 13 2A2 A3 24 27 A4
32 I2C0
CLK CKE CS RAS CAS WE L(U)DQM VDD 25 26 VSS
High-performance
10 REGISTER EXTRA DIR FUNCTIONS
1
ERROR/INT0(ERROR)
NPCM/INT1(NPCM)
2Y1 9 12 1Y4 Crossbar Switch 32
32 I2C1
Function DIR CS DIR fs Error Detection
DIR Pc and Pd 2
Control (48-bit) Calculator Non-PCM Detection
GND 10 11 2A1 32 32 32 32 32 RTI
GPIO/GPO DIT CS All Port
fsCalculator
Flags
MPIO_A All voltages are measured with a 10M/V DC electronic voltmeter. 10M
Data (48-bit)
DIR Interrupt
fsCalculator DTS-CD/LD Detection MPIO_B
I/O Interrupts MAX0 CONTROL MAX1 Events
32 PLL Components having special characteristics are marked and must be replaced
Validly Flag
User Data
MPIO_C
Out In with parts having specifications equal to those originally installed.
Channel Status Data MPO0 EMIF Schematic diagram is subject to change without notice.
BFRAME Detection MPO1 dMAX
Interrupt System Peripheral Interrupt and DMA Events
71
DIGITAL 2/2 S3.3
1
CAPACITOR
RESET IC
RST circuit REMARKS PARTS NAME
R23
4.7K
IC3 NO MARK ELECTROLYTIC CAPACITOR
R3116N271A-TR-F TANTALUM CAPACITOR
CD OUT NO MARK CERAMIC CAPACITOR
uCOM_N_RST S3.3
1
CERAMIC TUBULAR CAPACITOR
VDD
0.01(B)
0.1/16(F)
POLYESTER FILM CAPACITOR
2
C19
C20
NC GND POLYSTYRENE FILM CAPACITOR
3
MICA CAPACITOR
R36
120K
GND S3.3 P POLYPROPYLENE FILM CAPACITOR
R37
4.7K
0.1/16(F)
GND IC4 SEMICONDUCTIVE CERAMIC CAPACITOR
CB1
0.1/16(F)
TC7SH08FU POLYPHENYLENE SULFIDE FILM
C44
+19V 19.0 S3.3 S
+19V IC6
From/To POWER
R35
CAPACITOR
R33
Q4
470
3
10K
C46
GND V+ 8 V+
2 3 Q3 5
TC7W14FK
47k 1
PRI 0.7 7 1 R34 5 3 2 6
2
R21
47k 1 RESISTOR
10K
4 Q5
47k
S3.3 3.3 47K R38 REMARKS PARTS NAME
S3.3 1
47k
2 PSW_N_INT
R20
Page 75 M5
10K
GND 4 NO MARK CARBON FILM RESISTOR (P=5)
100/6.3
3
C47
V- 1K
2 DTC044EUBTL CARBON FILM RESISTOR (P=10)
V-
to POWER (1)_W702 DEST 3.3 A1037AK(Q/R/S)
C45
1/10
DTC044EUBTL METAL OXIDE FILM RESISTOR
P-CON 3.3 METAL FILM RESISTOR
PDET R22 METAL PLATE RESISTOR
100 FIRE PROOF CARBON FILM RESISTOR
+12D
+19V
S6 12.0
S6 CEMENT MOLDED RESISTOR
GND
PHI SEMI VARIABLE RESISTOR
1000P(B)
1000P(B)
KEY CHIP RESISTOR
C1
C6
DC_PRT
NOTICE (model)
3
R17
J JAPAN
R30
33K
47K
AW_PON U U.S.A
C CANADA
IR_PON
R GENERAL
1.5
1.8
GND IR_N_MUTE
T CHINA
DC_PRT S3.3 K KOREA
100P(CH)
DC_PRT
C21
DAMP_N_RST R15 A AUSTRALIA
DAMP_N_RST B BRITISH
4.7K
DAMP_N_PDN C17 G EUROPE
DAMP_N_PDN
DAMP_N_MUTE 0.1/16(F) L SINGAPORE
DAMP_N_MUTE R16
E SOUTH EUROPE
PWM_SDA
R24
10K
PWM_SDA 4.7K GND V TAIWAN
PWM_SCL C18
TB6IN1/AIN7/PD3
TB6IN0/AIN6/PD2
TB5IN1/AIN5/PD1
TB5IN0/AIN4/PD0
PWM_SCL F RUSSIAN
0.1/16(F)
DAMP_N_SD S3.3 P LATIN AMERICA
DAMP_N_SD GND
TB6OUT/PJ4
TB3IN1/PH7
TB3IN0/PH6
TB4IN1/PI7
TB4IN0/PI6
S BRAZIL
RXIN0/PE3
DAMP_N_OTW
AIN9/PD5
AIN8/PD4
AIN3/PC3
AIN2/PC2
AIN1/PC1
AIN0/PC0
INT3/PJ3
INT2/PJ2
DAMP_N_OTW H THAI
4
TEST4
RESET
RVDD3
MODE
NMI
XT2
XT1
100/6.3
SW_N_MUTE
C12
SW_N_MUTE
no_use
10MHZ
100
R10
76
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
R26
1.2 AIN10/PD6 RVSS
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
+1.2D
1
R8 100
XL1
1.7 AIN11/PD7 X1
+3.3D
2
4.7K AVSS DVSS
S3.3
R9
0.1/16(F)
0.1/16(F)
4.7K
3
C10
C11
CB103
VREFH X2 AW_LED
+12D S3.3
4
C15
R45
10K
0.1/16(F) AVDD3 DVDD3 GND
5
C13 C23
DAMP_N_OTW GND 0.1/16(F) INT4/PG3 PJ0/INT0 0.1/16(F) 3.3 +3.3D
+3.3D
6
SW_N_MUTE TB9OUT/PK2 PA7 REM_INT
1SS355VM
1SS355VM
[Main u-com]
7
R60
330K
D5
D4
DAMP_N_MUTE TB7OUT/PJ5 PA6/TRACEDATA3 PL2_LED
8
RESET IC DAMP_N_PDN TB2IN0/PH4 PA5/TRACEDATA2 IN1_LED
5
9
IC7
MICROPROCESSOR
R61
DAMP_N_RST TB2IN1/PH5 PA4/TRACEDATA1 DEC_LED2

2.2K
R3116N271A-TR-F
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
From/To OPE
CD OUT TB8OUT/PG7 PA3/TRACEDATA0 IN2_LED
5
VDD TEST2 PA2/TRACECLK DEC_LED1

Page 76 F2
0.01(B)
C14
2
TMPM330FDFG(B)
C29
NC GND 0.1/16(F) DVSS DVSS IN3_LED to POWER (2)_CB861

1/10
C28
R62
4
1K
IC1
DVDD3 DVDD3 UNI_LED
GND C24
PWM_SDA R11 SDA2/SO2/PG4 PF3/RXIN1 0.1/16(F) 3.3 S3.3
S3.3
GND PWM_SCL 47 R13 SCL2/SI2/PG5 PB2/TRST CV_LED
S3.3
GND S3.3 47 SCK2/PG6 PB1/TDI GND
R46
R206
10K
TEST1 PJ7/INT7 SUR_LED

8 7 6 5
No replacement part available. 22 IC1: TMPM330FDFG
R2 DAMP_N_SD INT5/PF7 TEST3 GND
32-bit RISC microprocessor
47KX4 TXD0/PE0 PA1/TCK/SWCLK SWD_SCK
1 2 3 4
R1 S16B-PHDSS(LF)
6 CB2
RXDF 3.3
100X4 RXD0/PE1 PA0/TMS/SWDIO SWD_IO
9 CTS0/SCLK0/PE2 PB0/TDO/SWV SWD_SWV GND I/F FLASH
1
NC FLASH_RXD Cortex-M3 I-Code
AHB-Bus-Matrix
8 AW_TX R27 TXD1/PE4 PI5/TB5OUT FCT1
2
microprocessor
TXDF 3.3 uCOM_N_RST
7 AW_RX 47 R29 RXD1/PE5 PI4/TB4OUT FCT0 D-Code I/F RAM
3
F_N_BOOT 3.3 DIR_SCK

6 47 CTS1/SCLK1/PE6 PK1/SCOUT/ALARM DIR_SCK Debug
4
System
no_use
R52
R53
NC
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
47K
5 DIR_MOSI
Writing port DIR_MOSI NVIC I/F BOOTROM
GND DIR_MISO
4 DIR_MISO
PB3
PB4
PB5
PB6
PB7
PK0/CEC
PG2/SCK0
PF0/TXD2
PF1/RXD2
PJ6/INT6
PF6/SCK1
PJ1/INT1
N_RST
PH1/TB0IN1
PH2/TB1IN0
PH3/TB1IN1
PI0/TB0OUT
PI1/TB1OUT
PI2/TB2OUT
PI3/TB3OUT
S3.3
PG0/SO0/SDA0
PG1/SI0/SCL0
PF4/SO1/SDA1
PF5/SI1/SCL1
3 CDDA_LRCK
PF2/SCLK2/CTS2
PH0/TB0IN0/BOOT
From/To 001.sht(DSP/DIR)
CDDA_LRCK
NC Bus Bridge
2 GND CDDA_SDO
CDDA_SDO
S3.3 3.3
1 DIR_N_INT
0.1/16(F)
S3.3 DIR_N_INT
C2
52044 DIR_N_RST CG PORT A to K

DIR_N_RST
DIR_N_CS
7 DIR_N_CS SIO/UART (3ch) TMRB (10ch)
I/O-Bus
to DIGITAL 1/2
No replacement part available. 4 3 2 1 AW_GPIO1 DSP_N_INT I2C/SIO (3ch) WDT
R31
R32
47K
47K
GND AW_GPIO1 DSP_N_INT
5 6 7 8 AW_TX DSP_SCK
S5 AW_TX DSP_SCK CEC RTC
47X4
47X4
47X4
R19
R25
R28
47X4
R12
GND AW_RX DSP_MOSI

AW_RX DSP_MOSI
AW_RX_EN DSP_MISO RMC (2ch) ADC (12ch)
2200P(B)
AW_RX_EN DSP_MISO
C52
GND AW_TX_EN DSP_N_RST

GND AW_TX_EN DSP_N_RST
C210 C211
0.1/16(F) 0.1/16(F) DSP_MUTE
DSP_MUTE
DSP_N_SPIRDY
0.1/25
C54
S3.3
R41
DSP_N_CS
11K
DSP_N_INT
DSP_N_RST
CDDA_LRCK
DIR_N_RST
DIR_N_INT
EEPROM
R42
DSP_N_CS
DSP_N_CS
DSP_MOSI
DSP_MISO
DSP_MUTE
CDDA_SDO
DIR_N_CS
18K
DIR_MOSI
DIR_MISO
DSP_SCK
RZR020P01TL Q1
DIR_SCK
DSP_N_SPIRDY
REGULATOR (32kbits) DSP_N_SPIRDY
COMP
GND
S6 IC2: R1EX25032ASA00A
SS
EN
FB
R6
1/6.3
0.1/16(F)
C3
R3
4096 x 8-bit SPI serial interface EEPROM

47K
8
R5
C8
10K
8 7 6 5 S5 10K
R43
12.0 IC8 G
82K
1SS355VM
BD9328FJ D1
AW_GPIO1
AW_TX_EN
AW_RX_EN
1 2 3 4 S3.3 +3.3D IC2
5.0 High voltage generator
R1EX25032ASA00A
SW
BST
VIN
GND
Vcc 8
R4
GND
1K
3.3 CS VCC
GND GND
1
Vss 4
decoder
L1 RB500V-40
VDD VOUT SD HOLD
Address generator
Q2
5
Memory array
Control logic
S 1
X
22UH
IC5
C53 GND D203 47k WP SCK

3
6
2
W 3
0.1/16(F)
NC CE VSS SI
47/16
47k
C51
0.1/25 C
4
6
3
0.1/16(F)
C43
decoder
Y-select and Sense amp.
no_use
10/25
10/10
R7
C41
C50
C40
HOLD 7
C7
4.7K
Y
D 5
DTC044EUBTL
R1154H033B-F
X8878A0
EEPROM Q 2 Serial-parallel converter
GND GND
IC8: BD9328FJ
9 GND 1ch step-down DC/DC converter
IC5: R1154H033B-T1-FE VCC

Voltage regulator OPEN EN 5V
SHUTDOWN 7 VREF OSC VREG
BST
Thermal 1
Protection
IC3, 7: R3116N271A-TR-F IC4: TC7SH08FU IC6: TC7W14FK OCP 12V
Voltage detector ICs VIN 5 1 VOUT Schmitt inverter
2-input AND gate VIN
UVLO 2
IBIAS TSD
1A 1 8 VCC
VDD 2 IN B 1 5 VCC S LVS
FB ERR
5 DRV SW OUTPUT
3Y 2 7 1Y
IN A 2 3
Vref LOGIC
COMP SLOPE
Delay Short Peak Current 2A 3 6 3A
PWM R LVS
1 OUT GND 3 4 OUT Y Protection Protection 6
Circuit
10 CE 3 2 GND SS
8 Soft Start
GND 4 5 2Y
Vref Pin No. Symbol Description
All voltages are measured with a 10M/V DC electronic voltmeter. 10M 1 VOUT Output Pin
3 GND 4
Components having special characteristics are marked and must be replaced 2 GND Ground Pin
GND
with parts having specifications equal to those originally installed. 5 3 CE Chip Enable Pin ("H" Active)
4
Schematic diagram is subject to change without notice. CD 5
NC
VDD
No Connection
Input Pin
72
INPUT
1
Page 76 E7
to POWER (4)_CB801
05R-JE
CB304
P5V S5
GND
IR_MUTE
IR_OUT
GND
S5_IR
Q304
RZR020P01TL Page 76 G7
to POWER (5)_CB831 S5
2
4.7/6.3
no_use
0.1/16
R336
R335
C320
R327
C319
3.3K
47K
R312
W303 Q302 RZR020P01TL
82 GND
R318
82
4.7/6.3
GND
R302
C315
0.1/16
47K
GND GND
R326
C314
1K
MF40245
10/10
100/16
C308
C309
S5 P5V
Q305 Q301
3
R319 GND
R301
C2411K(Q/R)
1K
560
no_use
0.1/16
0.1/16
0.1/16
0.1/16
0.1/16
0.1/16
0.1/16
C330
C331
C332
C333
C334
C338
C336
C337
C335
47/16
Q303
DTC044EUBTL
GND
GND
UART_TX GND
19
DGND DTC044EUBTL
4 18 PN301
UART_RX
17
GPIO1
16 GND
GPIO0
15
RESET_N
14
SDTI S5
13
DGND
12
MCLK
11
to AWCD2A_CB101 C316
5 DGND
0.1/16
10
BCLK
9 5.0 S5
LRCLK
1
8 DGND
SDTO R309
2
7 IR_PON
DGND 47
3
6 IR_N_MUTE
D-
4
5
CB305
DGND
DGND
5
4 AW_TX
D+ P5V
6
3 AW_RX
6 DGND
7
2 AW_GPIO1
P5V no_use
R332
R333
R334
R322
R324
8
5.0
47K
47K
47K
47K
19R-JE 1 DGND
9
CB301
no_use
0.1/16
SDTI
C306
C317
C305
10/10
23 22 21 20 19 18 17 16 15 14 13 12 11 10
GND DGND
Page 71 B2
GND MCLK to DIGITAL_CB104
DGND
GND
250601123K4
BCLK
7 DGND
0.1/16
KEY R330 C328 R328 LRCLK
Page 76 L7 SW
GND 100 100 SDTO
to POWER (3)_CB841
PSW_N_INT R331 R329 PSW_N_INT
Digital Audio Input 100 100
W301 C329 KEY
0.1/16
OUT G VCC
S5 MF40316
GP1FAV51RK0F
C301 AW_PON
GND
0.1/16
U301
TV DIG_OPT2 DGND
R303 OPT2
8
33 OPT1
GND
GND
OUT G VCC
S5
GP1FAV51RK0F
C302
0.1/16
U302
BD/DVD DIG_OPT1
R304
33
DIGITAL IN NOTICE (model)
9 GND J JAPAN
U U.S.A
C CANADA
CAPACITOR R GENERAL
REMARKS PARTS NAME T CHINA
NO MARK ELECTROLYTIC CAPACITOR RESISTOR K KOREA
TANTALUM CAPACITOR REMARKS PARTS NAME A AUSTRALIA
NO MARK CERAMIC CAPACITOR NO MARK CARBON FILM RESISTOR (P=5) B BRITISH
CERAMIC TUBULAR CAPACITOR CARBON FILM RESISTOR (P=10) G EUROPE
POLYESTER FILM CAPACITOR METAL OXIDE FILM RESISTOR L SINGAPORE
POLYSTYRENE FILM CAPACITOR METAL FILM RESISTOR E SOUTH EUROPE
MICA CAPACITOR METAL PLATE RESISTOR V TAIWAN
10 P POLYPROPYLENE FILM CAPACITOR FIRE PROOF CARBON FILM RESISTOR F RUSSIAN
SEMICONDUCTIVE CERAMIC CAPACITOR CEMENT MOLDED RESISTOR P LATIN AMERICA
POLYPHENYLENE SULFIDE FILM SEMI VARIABLE RESISTOR S BRAZIL All voltages are measured with a 10M/V DC electronic voltmeter. 10M
S
CAPACITOR CHIP RESISTOR Components having special characteristics are marked and must be replaced
H THAI with parts having specifications equal to those originally installed.
Schematic diagram is subject to change without notice.
73
DAMP
1
IC502: TAS5086DBT
PWM processor
+3.3D
[Speaker DC Protection]
+3.3D DVDD
DVSS
DVSS_ESD 1LF
VR_DIG 6
R525
0.1/16
C533
20K
8 V+ 6 Power
VR_ANA L MUX MUX PWM1
IC506 7 Supply
VR_OSC
NJM2904M 5 AVDD
3 DC_PRT_P
4 AVSS_PLL
R516 1 IC506 V- 2RF
NJM2904M
VREG_EN 6
2
R523
1K R MUX MUX PWM2
4.7K
Chan.
R517
22/16
1-6
C511
SDIN1 Serial
10K DGND SDIN2
Data MUX 6
33/16
C518
SDIN3
R526
C514 Interface 3LS
20K
BP SDIN4 MUX PWM3
Ch
DGND
2 33/16 DC_PRT_M 1-6
SDIN4 1-5 1-5 L
Channel Vol PWM 6
R521
Down- 4RS
4.7K
Selector R MUX PWM4
mix
MCLK Block
[Digital Amp Power Stage] [LC Low-Pass Filter]
SCLK
LRCLK Clock Rate 5C
PLLFLTP /Error 6
DGND PLLFLTM Detection (L+R)/2 MUX MUX PWM5
+19D (L+R)/2
HFCLK and PLL
OSCFLT
OSC_RES
no_use
R568
R570
R560
DIGITAL
100K
100K
6
0.1/50(F)
470/35
C590
MUX PWM6
C597
1-6 Channel Six Processing
4.7/25
4.7/25
C586
AMPLIFIER
no_use
C582
R569
R571
R561
100K
100K
Bass Management
DGND DGND SDA Serial
Control
DGND DGND SCL Interface
0.1/16
0.1/16
C540
C547
DGND
PWM
VALID1
Control
DGND RESET VALID2
GVDD _B GVDD_A
23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
+12DD +12DD
22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
PDN System Downmix
C558
3
1000P(B)
OTW BST_A MUTE I2S Serial
R538 C574
R550
Control
3.3
SDIN4 MUX SDOUT
0.1/25
BKNDERR Output
C601
NC NC 0.033
DGND DGND
0.1/50(F)
1/2P2.2
C564
NC PVDD_A
1/35
C550
0.01(B)
C617
SD PVDD_A FRONT L
PWM_A OUT_A L503
C591
0.47
IC503
+3.3D +3.3P L508
RESET_AB GND_A 15UH VR_ANA 1 PWM_1
0.01(B)
38
C618
15UH DGND DGND
0.1/50(F)
PWM_B GND_B
1/2P2.2
C575 R539
L502 DGND DGND AVDD 2 37 PWM_2
C551
R534 OC_ADJ OUT_B
0.1/25
C602
DGND
C565
AVSS 3 36 PWM_3
1/35
R551
1000P(B)
BLM21PG600SN1D
3.3
0.01/16(B)
22K GND PVDD_B
C521
C527
10/16
C559 AVSS 4 35 PWM_4
AGND BST_B
0.1/16
C536
C572
VREG BST_C 0.033 DGND PLL_FLTM 5 34 PWM_5
1000P(B)
DGND
R540 C576
DGND M3 PVDD_C 0.033
PLL_FLTP 6 33 PWM_6
R552
M2 OUT_C
3.3
1/2P2.2
0.1/50(F)
AVSS 7 32 VALID2
TAS5342LDDV
C552
C566
0.1/25
[PWM Modulator w/ Volume Control] M1 GND_C
1/35
C603
PWM_C GND_D L504 Note: MCLK 8 31 VALID1
0.01(B)
C619
DGND DGND
DGND
L509
4 RESET_CD OUT_D 15UH
Since the speaker output of this unit is BTL connected, the ground side
RESET 9 30 VR_DIG
C592
0.47
PWM_D PVDD_D 15UH
DGND PDN 10 29 DVSS
1/2P2.2
C577 R541
of the measuring instrument to be connected to the speaker terminal
X9776A0
0.01(B)
no_use
C567
C620
0.1/50(F)
NC PVDD_D
1/35
PN503 DGND
C553
DGND DGND MUST be kept in floating condition. DVDD 11 28 DVSS
0.1/16(F)
0.1/16
C538
1000P(B)
NC NC
C642
C640
C638
C528
DGND
DGND
PWM VDD BST_D
C562 DVSS 12 27 BKND_ERR
0.1/25
C604
R553
no_use
3.3

C641
C639
C637
+12DD
GVDD_C GVDD_D 0.033 DVSS_OSC 13 26 SDIN1
VR_ANA PWM_1 +12DD DGND
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CB503
R518
R522
OSC_RES 14 25 SDIN2
0.1/16
0.1/16
220
220
C548
C643 AVDD PWM_2
BTL
C544
+3.3P
0.1/16(F)
0.1/16(F) +12DD VR_OSC 15 24 SDIN3
C525
DGND AVSS PWM_3
0.01(B)
0.01(B)
C517
C522
22 DGND
0.1/16
0.1/16
C515
C520
+19D XHI
21
+3.3D 3.3
+3.3D DGND
AVSS PWM_4 R535 DGND DGND DGND DGND
MUTE 16 23 SDIN4
DGND DGND
To Front L/R & SW Speakers

DC_PRT 1.7 PLL_FLTM PWM_5 3.3
0.1/50(F)
20 SDA 17 22 SDOUT
4.7/25
4.7/25
C587
10/16
10/16
470/35
C534
C542
C593
C583
C598
IC502
DAMP_N_OTW PLL_FLTP PWM_6
19
1000P(B)
1000P(B)
1000P(B)
1000P(B)
SCL 18 21 RESERVED
C623
C625
C627
C628
DAMP_N_SD AVSS VALID2
18 DGND
17
DGND
DGND
MCLK VALID1 DGND DGND
DGND DGND LRCLK 19 20 SCLK
16
DIR_MCK RESET VR_DIG
C531
+3.3D SP_L+
4
FRONT L
DGND
DGND C519 C526 C516 PDN DVSS 0.1/16(F) SP_L-
15 DGND DGND 3 DRIVER
5 no_use 0.1/16(F)
X9716A0
From/To PCB MAIN
5086_BCK 1000P(B) DVDD DVSS SP_R+

14 +3.3D 2 FRONT R
R520
+3.3D
10K
5086_LRCK DVSS BKND_ERR R529 SP_R-

22FMN-BTK-A(LF)
13 DGND 1
R532 +19D
Page 71 L3 12
DGND
DGND
DVSS_OSC SDIN1 10K SP_SW+
CB505
5086_SW R528 OSC_RES SDIN2 SP_SW+
R564
R565
no_use
to DIGITAL_CB102
10K
10K
11
TAS5086DBT
no_use
DGND C524 18K
5086_LR VR_OSC SDIN3 SP_SW-
C594
10
C599
C588
DGND 0.1/16(F) MUTE SDIN4 SP_SW-
no_use
no_use
C584
9 DGND
FL DGND DGND
no_use
no_use
PWM_SDA R519 SDA SDOUT no_use
C624
C626
8
PWM_SCL 22 SCL RESERVED
no_use
7
no_use
DGND DGND
C541
C549
DAMP_N_RST LRCK SCLK
6 DGND
DAMP_N_PON R524 R527 DGND
5
no_use no_use DGND DGND
DAMP_N_MUTE DGND DGND
4 GVDD _B GVDD_A no_use
no_use23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
+12DD +12DD PN502
22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
SW_N_MUTE
no_use
3 C560
OTW BST_A
R542 C578
+12DD 12.0
2 +12DD NC NC
DGND DGND no_use RESISTOR
no_use
DGND CAPACITOR
no_use
no_use
C568
no_use
1 DGND NC PVDD_A
C554
REMARKS PARTS NAME REMARKS PARTS NAME
SD PVDD_A no_use
6 NO MARK CARBON FILM RESISTOR (P=5) NO MARK ELECTROLYTIC CAPACITOR
100P(CH)
PWM_A OUT_A L505 no_use
IC504
L510 CARBON FILM RESISTOR (P=10) TANTALUM CAPACITOR
RESET_AB GND_A
no_use no_use
no_use
no_use
METAL OXIDE FILM RESISTOR NO MARK CERAMIC CAPACITOR
R554
C629
C631
C633
C635
no_use
PWM_B GND_B
C579 R543
C605
+3MT
DGND
METAL FILM RESISTOR CERAMIC TUBULAR CAPACITOR
no_use
C555
R536 OC_ADJ OUT_B
C630
C632
C634
C636
DGND
C646
C569
no_use
no_use METAL PLATE RESISTOR POLYESTER FILM CAPACITOR
C621
GND PVDD_B no_use
no_use
FIRE PROOF CARBON FILM RESISTOR POLYSTYRENE FILM CAPACITOR
100P(CH)
AGND BST_B C561

no_use
C595
no_use
C537
no_use no_use CEMENT MOLDED RESISTOR MICA CAPACITOR
no_use
VREG BST_C C573 DGND
no_use
SEMI VARIABLE RESISTOR P POLYPROPYLENE FILM CAPACITOR
C622
M3 PVDD_C
R544 C580
DGND DGND
CHIP RESISTOR SEMICONDUCTIVE CERAMIC CAPACITOR
no_use
M2 OUT_C
no_use
no_use
no_use
DGND
no_use
TAS5342LDDV
C556
C570
C606
R555
M1 GND_C no_use
no_use
R567
Q504
no_use PWM_C GND_D L506 no_use
DGND
L511
RESET_CD OUT_D IC503: TAS5342LDDV
AGND AGND PWM_D PVDD_D 100 W stereo digital amplifier power stage
no_use
DGND DGND
no_use
R545
no_use
X9776A0
C571
[Sub Woofer OUT] NC PVDD_D
no_use
no_use no_use DGND
C557
Q501 Q502
C539
NC NC no_use
DGND
7
C581
R503 R506
no_use
C563
VDD BST_D
no_use no_use BIAS 4 21 VDD
GVDD_C GVDD_D
+12DD +12DD
DGND L501 Under-
no_use
+12DD DGND
NOTICE (model) voltage
C546
1P1 OTW 2 4
R510
C545
IC505 Protection
no_use
0
no_use
no_use
no_use +12DD J JAPAN

C506
R512
C510
no_use
no_use
Internal Pullup VREG 12 VREG

C512
C513
X2331A0
no_use
V+
C509
3 no_use +19D U U.S.A Resistors to VREG

no_use 1 4 8 R537
no_use
CB502 X2331A0 BIAS C CANADA
220/16
IC505 DGND DGND

R511
no_use
no_use 5 R513 R515 2 V-
3.3K
C507
J501 SD 5
C501 no_use C504 Power
To PCB INPUT
C589
no_use
no_use
SW_OUT R501 R504 7 no_use no_use

C535
C543
C596
no_use
no_use
R GENERAL
C585
C600
1 IC505 NJM4580E(TE2)
no_use no_use no_use 6 R509 R514 0 On
AGND
no_use
T CHINA
R507
2 AGND
NJM4580E(TE2)
no_use no_use AGND AGND AGND AGND AGND DGND M1 15 Reset 11 AGND
SYSTEM(+12DD)
no_use
DGND DGND K KOREA Protection

C508
3 DGND DGND
R508
4
DGND
DGND no_use A AUSTRALIA M2 14 and
C502 C505 no_use no_use I/O Logic
AGND IC507 IC507 DGND B BRITISH
PHI no_use
no_use 2 6 5 3 Temp.
G EUROPE M3 13
DGND Sense
TC7WH04FK TC7WH04FK +3.3D 10 GND
L SINGAPORE
no_use
IC507 E SOUTH EUROPE
no_use
V+ V TAIWAN RESET_AB 7
REGULATOR
C532
8 no_use
7
IC507
1
4 8
V- no_use F RUSSIAN Overload
IC507 RESET_CD 17 Isense 9 OC_ADJ
[19V 12V Regulator] TC7WH04FK
P LATIN AMERICA Protection
S BRAZIL
D501 DGND DGND
+12DD H THAI 23 GVDD_D
1SS355VM R562
IC501 24 BST_D
1P100
no_use KIA7812API
Q506 1036KT146(P/Q/R OUT IN R563 26, 27 PVDD_D
+19D
1P100 PWM Gate
COM PWM_D 18 Ctrl. Timing 28 OUT_D
Rcv. Drive
+19D
+3MT
BTL/PBTL-Configuration
DGND
R572
no_use
0.1/16
0.33/25
Pulldown Resistor
C523
no_use
Q507 19.0
29 GND_D
C529
C503
22 GVDD_C
0.1/50(F)
no_use
680/35
C644
C645
PN501
33 BST_C
9 DTC014EUBTL DGND 32 PVDD_C

+19D
+19D
DGND
DGND
+3MT
CB501
DGND no_use Gate

XHI
PWM_C 16 PWM 31 OUT_C

Ctrl. Timing Drive
Rcv.
BTL/PBTL-Configuration
1
2
3
Pulldown Resistor
30 GND_C
From POWER
IC501: KIA7812API 1 GVDD_B
Voltage regulator
Page 75 M2 34 BST_B
IC506: NJM2904M (TE3)
to POWER (1)_W701 1 INPUT 35 PVDD_B
R22 R17 R23
Single supply dual operational amplifier
PWM Gate
PWM_B 8 Ctrl. Timing 36 OUT_B
R1 Q11 Q11-1 Rcv. Drive
Q15 1. A OUTPUT BTL/PBTL-Configuration
1 8
2. A-INPUT Pulldown Resistor
Q16
A
Q12 3. A+INPUT
2 7
4. GND
37 GND_B
Q14 R14
R10 R15 5. B+INPUT
Q17 Q19 R16 3 B 6 44 GVDD_A
R19 6. B-INPUT
10 R12 3 OUTPUT
4 5
7. B OUTPUT
8. V+ 43 BST_A
Q18 Q6 R20
Q1
R18 40, 41 PVDD_A
All voltages are measured with a 10M/V DC electronic voltmeter. 10M R11
R7 C1
R9
PWM Gate
Z1 PWM_A 6 Ctrl. Timing 39 OUT_A
Components having special characteristics are marked and must be replaced R2 Q10 Rcv. Drive
Q2 BTL/PBTL-Configuration
with parts having specifications equal to those originally installed. R3 Q7 R21
Q13 Pulldown Resistor
Schematic diagram is subject to change without notice. Q4
38 GND_A
Q3 Q5 Q9 Q8
R13
R4 R5 R6 R8
2 COMMON (GND)
74
Safety measures YAS-CU201/ATS-CU2010/NS-WSW40

t4PNFJOUFSOBMQBSUTJOUIJTQSPEVDUDPOUBJOIJHIWPMUBHFTBOEBSFEBOHFSPVT#FTVSFUPUBLFTBGFUZNFBTVSFTEVSJOHTFSWJDJOH TVDIBTXFBSJOHJOTVMBUJOHHMPWFT
t/PUFUIBUUIFDBQBDJUPSTJOEJDBUFECFMPXBSFEBOHFSPVTFWFOBGUFSUIFQPXFSJTUVSOFEPGGCFDBVTFBOFMFDUSJDDIBSHFSFNBJOTBOEBIJHIWPMUBHFDPOUJOVFTUPFYJTUUIFSF
POWER 1/2 #FGPSFTUBSUJOHBOZSFQBJSXPSL DPOOFDUBEJTDIBSHJOHSFTJTUPS LPINT8
UPUIFUFSNJOBMTPGFBDIDBQBDJUPSJOEJDBUFECFMPXUPEJTDIBSHFFMFDUSJDJUZ
OFF 5 k/10 W
30

1 5IFUJNFSFRVJSFEGPSEJTDIBSHJOHJTBCPVUTFDPOETQFSFBDI 108&31$# $
$PO108&3
1$#
POWER (1)
R765 C722
C721 1P8.2 1000P/250

L705
s3
5 k-ohms POWER
HF57BB3.5X1.5X1
10 W TRANSFORMER
T701 +19V
RF2001T2D
PUH36-30
2 16
HS702
19.0
D713
W701
TH701 P2 1 15 +19V
R740
R746
R737
4.7K
no_use
0.1/50(F)
18K
C731
s26
s7 14
2200/25
C702
1P3.3K
1P3.3K
PT 2 S2B +19V
R711
C736
R749
R750
C738
To DAMP
s3
1/50
C740
R722
J701
s8
s14
CB701 L702 L706 Page 74 F9
s10
R725
L703
C719
s10
s11
1 2 P1 3 13 S2A GND
0.22/250
P6KE200A
2200/25
no_use
3 4
C701
C725
0.22/250
D706
C728
to DAMP_CB501
C704
R741
R747
AC IN TH702
390
15K
F701 4 12 GND
2 1 HF57BB3.5X1.5X1
4 3
R712
R723
D708
R738
s13
s2 +3MT
C713
s10
s6 5 11 S1A C750
s8
s9
1K
s1
C703
C720
no_use
VHIS
s12
CB702 CB703
R726
C727
s3
s4
2200/25
no_use
s10
TP00351-31 TP00351-31 80MM
C730
C739
HRM3H-DC12V V1 6 10 S1B
J704
no_use
R739 C733 SCN-XH
0.1
J702
RY701 D702 C735
V2 7 9 R744
R724
s5 47K
no_use
s10
0.1
R713
C732
D705
s8
s15
8 no_use no_use G2 G3
no_use
HF57BB3.5X1.5X1
K
C742
UPC1943T-E1-AZ
C705
R
G2 G3
s19
L704
0.01/250 IC703 IC705
R748
R742
820
G702
2.7K
A
A
NJM431U
3 Q701
PUH36-30
G701
HS701
R719
R714
R718 s18
10 R745
R727
D1NL20U-5083
4.7K
s16 5P0.12
R764
56
s23
D703
no_use
R763
R730
s24
R715
s18
no_use
R728
R729
s17
s25
HS703
no_use
R720
R705
R762
R731
s23
SPUS15-30
33K
470
R743
C709 D709
4.7K
R733
no_use
R761
HZU6.2B3
IC702
no_use 1P150
R707
R708 4.7K
RR264M-400TR
D719 no_use
D715
C710
HRM3H-DC12V
R701
330/50
R721
C723
D707
RY701
no_use
R716
no_use
no_use no_use
s18
R706
220K
s23
s21
R755
IC708
4 D1NL20U-5083
D721
HZU6.2B3
C706 0.1 KIA7805API
COMP DIS +5D
IN OUT
HZU22B2
R732
9
5 6 7 8
TLP781(D4-GR)
10K
C715
D704
C711
L6566BTR
2200P(B) VREF CS C717
no_use
no_use
no_use
16 15 14 13 12 11 10
C748
C749
C747
C707 Q703 COM
0.1 ZCD FMOD 1200P(B)
47/35
C718
100P(SL) MODE/SC VCC
no_use
no_use
D701
OSC GD C716
4
C712 SS GND 0.1/50(F) D717 R754
1 2 3
IC701
C708 DTC114EKA W702
0.22/16 VFF NC 18K 19.0 +19V
no_use
no_use
AC_OK HVS GND
R752
R703
47K
R717 0.7 PRI
To MAIN
R702 R704 470K 3.3 S3.3
D712 S1NB60-7101
R709
PWM
2.2K
4.7K 15K SUB- GND Page 72 B2
0.22/16
TRANSFORMER
5 CONTROL
C714
R751 DEST to DIGITAL_CB1
R710
s22
18K
T702 3.3 P-CON
2200/25
C729
100/6.3
1/25
C726
no_use
1 10 3.3 PDET
C743
47/16
1/25
C744
C745
C734
2 9 12.0 S6
8
Primary side ground 80MM
4 7 SAN-PH
5 6
R760
A1037AK(Q/R/S)
10K
D710 C2412K(Q/R/S)
R757
s20
22K
Q702
RR264M-400TR Q705
R734
33K
Destination Part List Q704 R759
C2412K(Q/R/S)
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
100P(SL)
| sXX | LOC | J | UC | TKALFH | BG | V | 22K
C746
1000P(B)
NOTICE
R756
C741
R758
100K
(model) +--------+---------------+---------------+---------------+---------------+---------------+---------------+
10K
6 | s1 | L702 | WJ26690 | WJ26690 | WJ32330 | WJ32330 | WJ26690 |
HZU6.2B3
R735
J JAPAN
C724
1/50
68K
| | |PLH10AN1612R1P2|PLH10AN1612R1P2| 370UH | 370UH |PLH10AN1612R1P2|
D720
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
U U.S.A | s2 | F701 | WG41040 | WG41040 | KB00069 | KB00069 | WG41040 |
C CANADA | | | 5A125V | 5A125V | T2.5AL250V | T2.5AL250V | 5A125V |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
R GENERAL | s3 | C721 | WH03590 | WH03590 | WQ85690 | WQ85690 | WH03590 |
| | C703 | 1000P/250 | 1000P/250 | 470P/250 | 470P/250 | 1000P/250 |
T CHINA | | C702 | | | | | | POWER(1)
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
K KOREA | s4 | L703 | WF52830 | WF52830 | WF71070 | WF71070 | WF52830 |
| | | ELF20N020AL | ELF20N020AL | ELF20N008AM | ELF20N008AM | ELF20N020AL |
A AUSTRALIA +--------+---------------+---------------+---------------+---------------+---------------+---------------+
B BRITISH | s5 | D702 | WP06190 | WJ44180 | WJ44180 | WJ44180 | WJ44180 |
| | | RS1505M | RS605M-B-C-J80| RS605M-B-C-J80| RS605M-B-C-J80| RS605M-B-C-J80|
G EUROPE +--------+---------------+---------------+---------------+---------------+---------------+---------------+
| s6 | TH702 | WF87530 | WF87530 | X | X | WF87530 |
L SINGAPORE | | | NTPAN4R0LDKB0 | NTPAN4R0LDKB0 | | | NTPAN4R0LDKB0 |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ IC705: UPC1943T
E SOUTH EUROPE | s7 | TH701 | X | X | WF12890 | WF12890 | X | IC701: L6566BTR IC703: NJM431U
7 V TAIWAN | | | | | NTPAA5R1LDNB0 | NTPAA5R1LDNB0 | | RESISTOR Multi mode controller for SMPS Adjustable precision shunt regulator Adjustable precision shunt regulator
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
F RUSSIAN | s8 | R711 | RD15856 | RD15856 | RD15910 | RD15910 | RD15856 | REMARKS PARTS NAME
| | R713 | 560K | 560K | 1M | 1M | 560K | VREF SS AOMP VFF
P LATIN AMERICA | | R712 | | | | | | NO MARK CARBON FILM RESISTOR (P=5) 10 14 9 15 K
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ 15 uA 6.4V
S BRAZIL | s9 | C713 | WP57390 | WP57390 | WP57400 | WP57400 | WP57390 | CARBON FILM RESISTOR (P=10) TIME - OVPL
REF
SOFT-START OVP
H THAI | | | 560/200 | 560/200 | 150/400 | 150/400 | 560/200 |
METAL OXIDE FILM RESISTOR OUT LOW CLAMP OFF2 1 mA
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ HV 1 and +
and DISABLE A
| s10 | R726 | WJ62490 | WJ62490 | WJ62500 | WJ62500 | WJ62490 | FAULT MNGT 1 2 3

METAL FILM RESISTOR
| | R724 | 1P8.2K | 1P8.2K | 1P33K | 1P33K | 1P8.2K | 7.7V
LINE VOLTAGE Q 1 2 3
| | R722 | | | | | | METAL PLATE RESISTOR FEEDFORWARD REFERENCE ANODE CATHODE
| | R725 | | | | | | VOLTAGE Reference REF A K
| | R723 | | | | | | FIRE PROOF CARBON FILM RESISTOR REGULATOR voltages
LEB 7 CS
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ Vcc 5 and Internal supply
| s11 | C719 | WJ32240 | WJ32240 | WJ32230 | WJ32230 | WJ32240 |
CEMENT MOLDED RESISTOR ADAPTIVE UVLO UVLO 1.5 V
| | | 0.01/250 | 0.01/250 | 1000P/630 | 1000P/630 | 0.01/250 | - + - + + -
SEMI VARIABLE RESISTOR Vcc
VIn PWM OCP Vcc
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
| s12 | C720 | X | X | WJ32230 | WJ32230 | X | CHIP RESISTOR UVLO_SHF
| | | | | 1000P/630 | 1000P/630 | | 400 uA +
8 +--------+---------------+---------------+---------------+---------------+---------------+---------------+
| s13 | D708 | X | X | WY72790 | WY72790 | X |
FMOD 6
- - Hiccup-mode
OCP logic 14V
| | | | | P6KE200A | P6KE200A | |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ + 5.7V BURST-MODE
OCP2
| s14 | J701 | VN50000 | VN50000 | X | X | VN50000 |
4 GD
| | | . | . | | | . | CAPACITOR
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ OSC 13 OSCILATOR R
| s15 | D705 | WJ45930 | WJ45930 | WJ15190 | WJ15190 | WJ45930 | REMARKS PARTS NAME Q DRIVER
| | | D1FK60-5063 | D1FK60-5063 | STTH110A | STTH110A | D1FK60-5063 | MODE SELECTION S
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ NO MARK ELECTROLYTIC CAPACITOR
MODE/SC 12 and
| s16 | Q701 | WT85670 | WT85670 | WY45420 | WY45420 | WT85670 | TANTALUM CAPACITOR TURN-ON LOGIC
| | | SPA21N50C3 | SPA21N50C3 | IPA90R500C3 | IPA90R500C3 | SPA21N50C3 |
TIME
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ NO MARK CERAMIC CAPACITOR 50 mV ZERO CURRENT
OUT OVPL
| s17 | R728 | WP58280 | WP58280 | X | X | WP58280 | - DETECTOR
100 mV
| | | 5P0.18 | 5P0.18 | | | 5P0.18 | CERAMIC TUBULAR CAPACITOR
ZCD 11 + 4.5V
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
| s18 | R714 | RD15718 | RD15718 | RD15768 | RD15768 | RD15718 | POLYESTER FILM CAPACITOR OVP
OFF2 -
OVERVOLTAGE
| | R716 | 18K | 18K | 68K | 68K | 18K | LATCH
| | R715 | | | | | |
POLYSTYRENE FILM CAPACITOR PROTECTION + 8 GIS
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ MICA CAPACITOR IC_LATCH
9 |
|
s19 |
|
T701 |
|
YD526A0
ETS1129A
|
|
YD526A0
ETS1129A
|
|
YD527A0
ETS1130A
|
|
YD527A0
ETS1130A
|
|
YD526A0
ETS1129A
|
| P POLYPROPYLENE FILM CAPACITOR
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ AC_OK 16 - AC_FAIL
DISABLE
| s20 | T702 | YE382A0 | YE383A0 | YE385A0 | YE385A0 | YE384A0 | SEMICONDUCTIVE CERAMIC CAPACITOR 0.450V
15 uA +
| | | YE382 | YE383 | YE385 | YE385 | YE384 | 3V 0.485V UVLO
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
POLYPHENYLENE SULFIDE FILM
S
| s21 | R708 | RD35739 | RD35739 | RD35727 | RD35727 | RD35739 | CAPACITOR
| | | 39K | 39K | 27K | 27K | 39K | 3
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ GND
| s22 | R751 | RD35710 | RD35668 | RD35739 | X | RD35715 |
| | | 10K | 6.8K | 39K | | 15K |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
| s23 | R706 | RD15833 | RD15833 | RD15868 | RD15868 | RD15833 |
| | R705 | 330K | 330K | 680K | 680K | 330K |
| | R764 | | | | | |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+
| s24 | R730 | RD15433 | RD15433 | RD15422 | RD15422 | RD15433 | All voltages are measured with a 10M/V DC electronic voltmeter.
| | | 33 | 33 | 22 | 22 | 33 |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ Components having special characteristics are marked and must be replaced
| s25 | R729 | WP58280 | WP58280 | WS27760 | WS27760 | WP58280 | with parts having specifications equal to those originally installed.
| | | 5P0.18 | 5P0.18 | 5P0.15 | 5P0.15 | 5P0.18 |
10 +--------+---------------+---------------+---------------+---------------+---------------+---------------+
| s26 | R737 | RD35662 | RD35662 | RD35651 | RD35651 | RD35662 |
| | | 6.2K | 6.2K | 5.1K | 5.1K | 6.2K |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+ 10M

75
POWER 2/2
1
Page 72 L5
to DIGITAL_CB103
To DIGITAL
16
15
14
13
12
11
10
3
2
1
9
8
7
6
2 CB861
GND
GND
GND
S16B-PHDSS(LF)
3.3 +3.3D
CV_LED
AW_LED
3.3 S3.3
SUR_LED
UNI_LED
IN3_LED
IN2_LED
IN1_LED
PL2_LED
REM_INT
DEC_LED1
DEC_LED2
Remote control
GND sensor
3 GP1UE261RKVF
U861
R871
47
GND
VCC
VOUT
100P(SL)
0.1/16
47/6.3
C863
C862
C861
4
GND
Q861 Q862 Q863 Q864 Q865 Q866 Q867 Q868 Q869 Q870
KRA102S-RTK/P KRA102S-RTK/P KRA102S-RTK/P KRA102S-RTK/P KRA102S-RTK/P KRA102S-RTK/P KRA102S-RTK/P KRA102S-RTK/P KRA102S-RTK/P KRA102S-RTK/P
R861
R863
R867
R868
R862
820
820
220
220
820
R864
R865
R866
R869
R870
820
820
820
820
820
5
SLI-343M8G
SLI-343M8G
SLI-343M8G
SLI-343M8G
SLI-343M8G
SLI-343M8G
SLI-343M8G
SLI-343M8G
DTS J model
D861
D868
D862
D863
D864
D865
D866
D869
TV BD/DVD YIT SURROUND CLEAR VOICE UNIVOLUME AAC SUBWOOFER
indicator indicator indicator indicator indicator indicator G R D867 indicator indicator indicator
SML72423C_TP15
POWER(2)
INPUT1 INPUT2 INPUT3 SURROUND Clear Voice UNI_VOLUME DECODE PLII AW POWER (2)
DD/DTS/AAC GND
CB801
C801 C802 IC801 05PSL-JE
0.1/16 10/10 TC7SH02FU S5_IR
VS
TSOP98238
KEY
To INPUT
GND
U801
To INPUT
GND
G
V+ IR_OUT Page 73 D7
R841
R842
6.8K
4.3K
R801 5 Page 73 H2
OUT
STBY_SW to INPUT_W301
7 IR_N_MUTE to INPUT_CB304
100
AN5306X-B262
IR_OUT PHL
TV remote control GND CB841
3 Page 73 F3
R802
D831
sensor C803 TV remote control
10K
V- to INPUT_W303 signal transmitter
SW843
SW841
SW844
SW842
0.1/16
(Power)
CB831
R803 VB85810
SAN-PH POWER (3)
100 Q801
INPUT VOLUME - VOLUME + STANDBY/ON
GND
ST801 POWER(5) POWER (3)
POWER (5)
8 POWER(4)
Key detection for A/D port
DTC044EUBTL
Key input (A/D) pull-up resistance 10 k-ohms
0 +4.3 k +6.8 k open
Detected voltage value 0 0.853 1.177
3.3 V
at 91 pin 0.344 V 1.164 V 1.494 V
GND
POWER (4) A/D value
0 27 66 90 91 155 255
(3.3 V=255)
KEY INPUT VOLUME + VOLUME Key off
IC801: TC7SH02FU
2-input NOR gate
9
IN B 1 5 VCC
CAPACITOR NOTICE (model)
J JAPAN
IN A 2 A B Y REMARKS PARTS NAME
L L H RESISTOR U U.S.A
NO MARK ELECTROLYTIC CAPACITOR
L H L C CANADA
GND 3 4 OUT Y H L L TANTALUM CAPACITOR REMARKS PARTS NAME
H H L R GENERAL
NO MARK CERAMIC CAPACITOR NO MARK CARBON FILM RESISTOR (P=5)
T CHINA
CERAMIC TUBULAR CAPACITOR CARBON FILM RESISTOR (P=10)
K KOREA
POLYESTER FILM CAPACITOR METAL OXIDE FILM RESISTOR
A AUSTRALIA
POLYSTYRENE FILM CAPACITOR METAL FILM RESISTOR
B BRITISH
MICA CAPACITOR METAL PLATE RESISTOR
P
G EUROPE
POLYPROPYLENE FILM CAPACITOR FIRE PROOF CARBON FILM RESISTOR
10 SEMICONDUCTIVE CERAMIC CAPACITOR CEMENT MOLDED RESISTOR
L SINGAPORE
E SOUTH EUROPE
POLYPHENYLENE SULFIDE FILM SEMI VARIABLE RESISTOR
S
All voltages are measured with a 10M/V DC electronic voltmeter. 10M V TAIWAN
CAPACITOR CHIP RESISTOR
Components having special characteristics are marked and must be replaced F RUSSIAN
with parts having specifications equal to those originally installed.
P LATIN AMERICA
S BRAZIL
H THAI
76
Safety measures YAS-CU201/ATS-CU2010/NS-WSW40

NS-WSW40
t4PNFJOUFSOBMQBSUTJOUIJTQSPEVDUDPOUBJOIJHIWPMUBHFTBOEBSFEBOHFSPVT#FTVSFUPUBLFTBGFUZNFBTVSFTEVSJOHTFSWJDJOH TVDIBTXFBSJOHJOTVMBUJOHHMPWFT
MAIN t/PUFUIBUUIFDBQBDJUPSTJOEJDBUFECFMPXBSFEBOHFSPVTFWFOBGUFSUIFQPXFSJTUVSOFEPGGCFDBVTFBOFMFDUSJDDIBSHFSFNBJOTBOEBIJHIWPMUBHFDPOUJOVFTUPFYJTUUIFSF
#FGPSFTUBSUJOHBOZSFQBJSXPSL DPOOFDUBEJTDIBSHJOHSFTJTUPS LPINT8
UPUIFUFSNJOBMTPGFBDIDBQBDJUPSJOEJDBUFECFMPXUPEJTDIBSHFFMFDUSJDJUZ
OFF 5 k/10 W
30

1 5IFUJNFSFRVJSFEGPSEJTDIBSHJOHJTBCPVUTFDPOETQFSFBDI ."*/1$# $$
Page 78 I2 Page 78 I3 $ $PO."*/
1$#
to DAC (1)_CB603 to DAC (1)_CB604
to DAC to DAC J3
MAIN(1)
no_use
W1
W6
1 4 1 9
A949(O/Y) +B
32.9 33.0 R53 33.2
33.2
MAIN (1) 56
+B
Q14
10/50
1SS355VM
MAIN (3)
C35
R32
R44
MAIN(3)
D9
0.1/50(F)
560
330
Q16
A1312-GR,BL(TE8
RX
TX
5.0 RST
5.0 +5V
1/2
A/C
0 DGND
0 DGND
0 DGND
0 AGND
P-CON
LED-ON
C41
1SS355VM
A1312-GR,BL(TE8
0 SIG
6
7 32.4
2.9
D10
C42 IC2 GND 32.4
R62
A1162-Y(TE85R,F
R49
47K
10K
5
A1312-GR,BL(TE8
C51
2 31.8
2.8
2.8
3.3
3.3
ST4 0.1/50(F) Q18C
NJM4580E(TE2) 0.082 STD01N
R71 33.2
52044 Q6 Q11 Q22
RXDF R7 8 R51 1.1
R38
R60
5.6K
100K
1.1
10K
-8.6
NC 100 C54 R69 V+ 0.7 2.2
0 2
1 0
1K
A1312-GR,BL(TE8
A1312-GR,BL(TE8
TXDF R8 10/50 IC2
3 0 0 Q21
Q3
Q8
0
C3906KT146(R,S)
10
(Writing port) F_N_BOOT L.P.F. NJM4580E(TE2) 0 R1 0
R63
33K
10/50
V-
C38
NC 4 -32.7 -32.4 1.5K
R82
FIRMWARE
2P0.22
100
R55
R57
1.2K
0
R2
2.2
DGND
NJM4580E(TE2) C25
N_RST R9 R3 C14 R5 R6 R23 C40
0 5
7
C16
NC 10 100 10/50 6.8K 6.8K IC1 3.9K C31 1000P/100
s4
100/16
2P0.22
0
3
R58
0
1000P(B)
S3.3 6 R50
C26
C1 100P(SL)
C52 100K
CB5 C11
Q18A RY1
(Reset)
no_use 0.39
L.P.F. 1000P/100
-1.0 STD01P 0 OSA-SS-224DM3 s2
C29 Q12 W2A
470K
R4
C2
C15
0.1
RE
s5
RESET
C3906KT146(R,S)
D8 SP+
-32.0
C2712-Y(TE85R,F
C2712-Y(TE85R,F
LINK 0.033/100
SW3 0 -32.7 DRIVER
indicator R16 1SS355VM R52 -1.0
SKHHLM341A SP- SUBWOOFER
-32.6
R35
3.3K -32.4 2.2
33
Q4 Q5
1SS355VM
100 1SS355VM
C19
R64
WH
D4
D5
12K
2 W2B
H.P.F. 8 Q10
R28
CB23 C2712-Y(TE85R,F s2
10K
10/50 0 0 GND
C12
R48 -32.5
SLR-342MC
0.027/100
0.1
2 1 ID(1/2) C4 C5 PHI L1 A1162-Y(TE85R,F
D1
0 3 NJM4580E(TE2)
C10
(For factory) W3 -33.0 -33.0
0.82
C8
R65
R18
R19
R14 47K
22K
100
Q17
1 1 MAIN MAIN 0
10/50
R31
R33
R36
R45
no_use
C36
220
220
10K
220
0.15 0.15 IC1
Q15
3.1 0
4
R59
SW1 CB6 0 100 AGND AGND 0 J2
10
R66
R54
560
PHI 2 -33.2
Group ID switch SSSF110500
R29
0.47
100K
C9
4 +15 +15 15.1 -33.1 56 -33.4
no_use
R10 R13 +15
C20
C2229(O/Y) -B
R76
12K
22K 100 -15 -15 -15.0

C -15 J4
no_use
C18
0.7 R78 2.8
R11
56K
R12
DGND DGND
C A ID(A/C) no_use
5
10K no_use
R77
R79
4.7K
22K
A Q23 C17
no_use
SW2 C2712-Y(TE85R,F
R30
SSSF110500 10/50 W4
3P0.1
R61
0.01(B)
DGND
C13
P-CON
C53
+5V R15 R22
no_use
5 1.0 100K
Q1 GND
+B
22/50
R17
KTC2026 +15
15K
C22
ST1 R20 33.2 15.1
RR264M-400TR
-32.5 33.2 1.0
POWER R24
D2
22/50
C33
TRANSFORMER 15.6 G1 PN1
R80
2.2K
4.7K
MAIN[4] 0
T2
NOTICE RE R25
4700/50
(model) W8B
C23
HZU15B3
J JAPAN 2.2K
22/50
BE
D6
C27
U U.S.A 5 k-ohms
+15
0.1/250
10 W +B
C6
C CANADA GND R34 24.1 R56
R GENERAL
BL 100K 2P470
HZU12B2
T CHINA
39K
D12
W5A2 W5B2
R39
R46
R47
6
470K
10K
K KOREA
OSA-SS-224DM3
HZU15B3
22/50
C28
0.1/250
A AUSTRALIA
4700/50
5 k-ohms
R42
C7
D7
RY1
10 W
C2712-Y(TE85R,F
B BRITISH 0.8
C24
R26 1.4 R37 100K
HZU12B2
G EUROPE 1.4
D13
no_use
2.2K Q7 Q9 22
J1
L SINGAPORE
22/50
R81
R40
W9B
4.7K
470K
C34
1SS355VM
E SOUTH EUROPE
C2712-Y(TE85R,F
Q13
WH R27 -15.6
D11
RE D3
D2704(K)
D2704(K)
-8.6 0 0.1
V TAIWAN
TS4B03G-07_X0 2.2K
no_use
100/16
Q20
F RUSSIAN 0.7
22/50
AC 49.0
C21
R41
Q2
220K
no_use
R21 0
C37
C39
C30
P LATIN AMERICA 0 0
-33.4 1.0 -33.4 -15.0
-B
S BRAZIL KTA1046-Y-U/PFY -15 0
MAIN (4)
H THAI GND1
GND1
7 RESISTOR
REMARKS PARTS NAME
NO MARK CARBON FILM RESISTOR (P=5) MAIN(2) MAIN (2) D15 A949(O/Y) Destination Part List
RR264M-400TR Q25 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
CARBON FILM RESISTOR (P=10) C3 R67 12.0 11.3 | sXX | LOC | J | UC | TK | A | BGF | LH | V |
METAL OXIDE FILM RESISTOR +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
0.01/275 1P150
R74
4.7K
HZU6.2B3
METAL FILM RESISTOR | s1 | F1 | WG40970 | WG40970 | KB00066 | KB00066 | KB00066 | KB00066 | WG40970 |
RY2
14.8
D16
W9A
HRM3H-DC12V
| | | 1.6A125V | 1.6A125V | T400MAL250V | T400MAL250V | T400MAL250V | T400MAL250V | 1.6A125V |

METAL PLATE RESISTOR 11.3 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
FIRE PROOF CARBON FILM RESISTOR RY2
HZU6.2B3
| s2 | W2A | WU18810 | WU18810 | WM78530 | WU18810 | WM78530 | WU18810 | WU18810 |

HRM3H-DC12V
D17
CEMENT MOLDED RESISTOR W8A | | W2B | - | - | - | - | - | - | - |

+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
R73
10K
SEMI VARIABLE RESISTOR 0.2 | s3 | T1 | YE664A0 | YE665A0 | YE666A0 | YE667A0 | YE666A0 | YE666A0 | YE669A0 |
CHIP RESISTOR Q26 Q24 | | | YE664 | YE665 | YE666 | YE667 | YE666 | YE666 | YE669 |
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
47K 10K 2.8 R75 | s4 | C16 | X | X | US06122 | X | US06122 | X | X |
330/50
8 | | | | | 22P(CH) | | 22P(CH) | | |
C49
5.0 100
1000P(B)
CAPACITOR
47K
10K
+--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
C55
REMARKS PARTS NAME | s5 | C15 | X | X | US06310 | X | US06310 | X | X |

ST2 CB24
no_use | | | | | 1000P(B) | | 1000P(B) | | |
NO MARK ELECTROLYTIC CAPACITOR KRC404-RTK/P KRC402-RTK/P +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
TANTALUM CAPACITOR AC 13.8 D18 | s7 | L2 | WJ26690 | WJ26690 | WJ32330 | WJ32330 | WJ32330 | WJ32330 | WJ26690 |
| | |PLH10AN1612R1P2|PLH10AN1612R1P2| 370UH | 370UH | 370UH | 370UH |PLH10AN1612R1P2|
NO MARK CERAMIC CAPACITOR
s3 D14 +--------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+---------------+
CERAMIC TUBULAR CAPACITOR no_use
CB1 1 10 S1NB60-7101
POLYESTER FILM CAPACITOR IC3
IPS-5007 2 9 KIA7805PI
POLYSTYRENE FILM CAPACITOR 2.9
0.22/250
CB8 CB7 10.3 IN OUT

C43
F1 8
MICA CAPACITOR s7 IC1, 2: NJM4580E IC3: KIA7805PI
P POLYPROPYLENE FILM CAPACITOR s1 5.0 PHI Dual operational amplifier Voltage regulator
4 7 COM
4 3 +5V
2200/25
100/16
SEMICONDUCTIVE CERAMIC CAPACITOR 1 INPUT

1/25
1/25
1/25
C45
C46
C47
C48
5 6 R22 R17 R23

C44
POLYPHENYLENE SULFIDE FILM 1 2 P-CON V+

AC IN CB2
9 S
CAPACITOR IPS-5007
L2
T1 0 DGND
8 R1 Q11 Q11-1
Q15
1
SUB- AC 9.3 Q16
TRANSFORMER REGULATOR CB4

2, 6 1, 7 OUTPUT
Q12
Q14
R10 R15
R14
Q17 Q19 R16
INPUT R19
+INPUT R12 3 OUTPUT
3, 5 Q18 Q6 R20
Q1
R18
R11 R9
Z1 R7 C1
R2 Q10
Q2
Q7 R21
V Q13 R3
4 Q4
Q3 Q5 Q9 Q8
R13
R4 R5 R6 R8
2 COMMON (GND)
10
All voltages are measured with a 10M/V DC electronic voltmeter. 10M
Components having special characteristics are marked and must be replaced
77
NS-WSW40
DAC
1
+5V
CB601 PHI
17FMN-STK-A(LF) CB603
R612
R652
10K
10K
0 DGND
ANA_IN 0.8 4
17 A1037AK(Q/R/S) R609 5.0 RST
DGND 0 Q604 3 Page 77 C2
16 100 2.9 RX
GPIO9 0 R619 2 to MAIN (3)_W1
15 0 TX
2 GPIO8 0 10 R618 1
14
GPIO7 2.9 R617 10
13
GPIO6 2.8 10
DGND DGND
12
GPIO5 2.8 +5V
11
GPIO4 3.3 R653 PHI
10 CB604
SCL 2.9 100
to AWCD2B +5V
1000P(B)
9 5.0
1
C619
SDA 2.9 C615
8 0.1/16 0 DGND
2
SDA-EEP 2.9
7 2.8 P-CON
3
SCL-EEP 2.9
6 DGND 2.8 LED_ON
3 4
DGND 0
5 3.3 1/2 Page 77 D2
5
VPP 0 to MAIN (3)_W6
4 3.3 A/C
6
DGND 0
3 0 DGND
C611 R607 R615 7
UART-RX-D 2.9 0
2 DGND 0 AGND
8
UART-TX-D 2.3 DGND DAC 10/16 2.2K 10K
0 SIG
1 9
ZEROL/NA ZEROR/ZEROA
9 10 11 12 13 14 15 16
7 6 5 4 3 2 1
C612 R608 0 R616
MS VOUTL
0.1/16
C601
C602
10/10
IC601
10/16 2.2K 10K SIG
13R-JE MC VOUTR
CB602 +5V AGND (For service)
P5V 5.0 MD VCOM
1500P(B)
1500P(B)
13
4
C613
C614
R610
R611
0.1/16
PCM1780DBQR
47K
47K
DGND 0 SCK AGND PHI
12 R601 C609 CB605
LRCLK 1.4 10 DATA VCC C607 10/10 For Inspection
11 DGND AGND
BCLK 1.4 R602 BCK NC
10
AGND
DGND 0 10 LRCK NC
8
9 C610
MCLK 1.4 R603 C608 10/10
8 R620
DGND 0 10 0.1/16 L602
7 100 +5V R613 0.7
SDTI 0 R604 C617 PZ2012U600-3R0T
6 22K
RST 10 +5V
0.1/16 Q605
5 C618
A/C 3.3 R654 D2704(K)
4
5 SW_N_MUTE 0 100 no_use
D601 AGND
3 1SS355VM
CAPACITOR NOTICE (model)
RX 2.9 DGND AGND 4.4
2 J JAPAN
REMARKS PARTS NAME
TX 0 R614 0.7 U U.S.A
C616 NO MARK ELECTROLYTIC CAPACITOR RESISTOR
1
KRA302-RTK/P 220/16 22K C CANADA
TANTALUM CAPACITOR REMARKS PARTS NAME
R606
1000P(B)
Q606 R GENERAL
10K
C620
D2704(K) NO MARK CERAMIC CAPACITOR NO MARK CARBON FILM RESISTOR (P=5)
10K
DGND T CHINA
0 CERAMIC TUBULAR CAPACITOR CARBON FILM RESISTOR (P=10)
AGND K KOREA
POLYESTER FILM CAPACITOR METAL OXIDE FILM RESISTOR
10K A AUSTRALIA
3.8 POLYSTYRENE FILM CAPACITOR METAL FILM RESISTOR
DGND Q601 Q602 AGND
Q603 4.4 B BRITISH
4.7K 47K
MICA CAPACITOR METAL PLATE RESISTOR
0 P
G EUROPE
POLYPROPYLENE FILM CAPACITOR FIRE PROOF CARBON FILM RESISTOR
L SINGAPORE
47K
4.7K
SEMICONDUCTIVE CERAMIC CAPACITOR CEMENT MOLDED RESISTOR

6 E SOUTH EUROPE
POLYPHENYLENE SULFIDE FILM SEMI VARIABLE RESISTOR
S V TAIWAN
KRC401-RTK/P KRC404-RTK/P CAPACITOR CHIP RESISTOR
F RUSSIAN
P LATIN AMERICA
DGND AGND S BRAZIL
DAC (1)
H THAI
IC601: PCM1780DBQR
Audio digital-to-analog converter
P5V
DAC (2)
BCK
LRCK Audio
Serial Output Amp VOUTL
DATA Port DAC and P5V
Low Pass Filter 1
DGND
4/8 2
Oversampling
Digital
Enhanced D+
Multilevel 3
(FMT) Filter VCOM
Delta Sigma
8 With
Function
Modulator 4
DGND
P5V
MS (DEMP0)
Serial Control D- 13PSL-JE
MC (DEMP1)
Control 5
Port Output Amp CB652
DAC and
DGND P5V
MD (MUTE) 6 13
Low Pass Filter
To AW2
VOUTR
SDTO R651 DGND
7 12
ZEROL/NA 1 16 ZEROR/ZEROA 47K
(TEST) LRCLK LRCLK
System Clock MS 2 15 VOUTL 8 11
MC 3 14 VOUTR BCLK BCLK
SCK System 9 10
MD 4 13 VCOM to AWCD2B
To DAC
Clock Zero Detect Power Supply DGND DGND
Manager
SCK 5 12 AGND 10 9
MCLK GND MCLK
DATA 6 11 VCC 11 8
BCK 7 10 NC DGND DGND
12 7
VCC
AGND
ZEROR/ZEROA(1)
(ZEROA)
ZEROL/NA(1)
LRCK 8 9 NC
9 13
SDTI SDTI
6
RST RST
14 5
(1) Open-drain output for thePCM1782
GPIO0 A/C
NOTE: Signal names in parentheses ( ) are for the PCM1781. 15 4
GPIO1 SW_N_MUTE
16 3
RX RX
17 2
DGND TX
18 1
TX
19
CB651 GND
19R-JE
10
All voltages are measured with a 10M/V DC electronic voltmeter. 10M ST651
Components having special characteristics are marked and must be replaced
GND
78
REPLACEMENT PARTS LIST

ELECTRICAL COMPONENT PARTS
WARNING
Components having special characteristics are marked and must be replaced with parts having specifications
equal to those originally installed.

ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS:

C.A.EL.CHP : CHIP ALUMI.ELECTROLYTIC CAP LED.CHP : CHIP LED
C.CE : CERAMIC CAP LED.DSPLY : LED DISPLAY
C.CE.ARRAY : CERAMIC CAP ARRAY LED.INFRD : LED,INFRARED
C.CE.CHP : CHIP CERAMIC CAP PHOT.CPL : PHOTO COUPLER
C.CE.M.CHP : CHIP MULTILAYER CERAMIC CAP PHOT.INTR : PHOTO INTERRUPTER
C.CE.SAFTY : RECOGNIZED CERAMIC CAP PHOT.RFLCT : PHOTO REFLECTOR
C.CE.TUBLR : CERAMIC TUBULAR CAP PHOT.TR : PHOTO TRANSISTOR
C.CE.SMI : SEMI CONDUCTIVE CERAMIC CAP PIN.TEST : PIN,TEST POINT
C.EL : ELECTROLYTIC CAP PTC.THERM : POSITIVE TEMPERATURE COEFFICIENT THERMISTOR
C.EL.BP : BIPOLAR ELECTROLYTIC CAP R.ANTI.SURGE : FIXED ANTI SURGE RESISTOR
C.EL.CHP : CHIP ELECTROLYTIC CAP R.ARRAY : RESISTOR ARRAY
C.MICA : MICA CAP R.CAR. : CARBON RESISTOR
C.ML.FLM : MULTILAYER FILM CAP R.CAR.CHP : CHIP RESISTOR
C.MP : METALLIZED POLYESTER FILM CAP R.CAR.FP : FLAME PROOF CARBON RESISTOR
C.MYLAR : MYLAR FILM CAP R.CEMENT : CEMENT RESISTOR
C.MYLAR.ML : MULTILAYER MYLAR FILM CAP R.CHP : CHIP RESISTOR
C.NIOB.OXD : NIOBIUM OXIDE CAP R.FUS : FUSIBLE RESISTOR
C.PAPER : PAPER CAPACITOR R.MTL.CHP : CHIP METAL FILM RESISTOR
C.PLS : POLYSTYRENE FILM CAP R.MTL.FLM : METAL FILM RESISTOR
C.POL : POLYESTER FILM CAP R.MTL.OXD : METAL OXIDE FILM RESISTOR
C.PP : POLYPROPYLENE FILM CAP R.MTL.PLAT : METAL PLATE RESISTOR
C.PP.CHP : CHIP POLYPROPYLENE FILM CAP RSNR.CE : CERAMIC RESONATOR
C.TNTL : TANTALIUM CAP RSNR.CRYS : CRYSTAL RESONATOR
C.TNTL.CHP : CHIP TANTALIUM CAP SCR.BND.HD : BIND HEAD B-TIGHT SCREW
C.TRIM : TRIMMER CAP SCR.TERM : SCREW TERMINAL
CN : CONNECTOR SCR.TR : SCREW,TRANSISTOR
CN.BS.PIN : CONNECTOR,BASE PIN SURG.PRTCT : SURGE PROTECTOR
CN.CANNON : CONNECTOR,CANNON SUPRT.PCB : P.C.B. SUPPORT
CN.DIN : CONNECTOR,DIN SW.LEVER : LEVER SWITCH
CN.FLAT : CONNECTOR,FLAT CABLE SW.MICRO : MICRO SWITCH
CN.FFC : CONNECTOR,FLEXIBLE FLAT CABLE SW.LEAF : LEAF SWITCH
CN.HDMI : HDMI CONNECTOR SW.PUSH : PUSH SWITCH
CN.PHOTO.R : PHOTO FIBER SENSOR,RECEIVED SW.RT : ROTARY SWITCH
CN.PHOTO.T : PHOTO FIBER SENSOR,TRANSMITTED SW.RT.ENC : ROTARY ENCODER
D.SCHOTTKY : SCHOTTKY BARRIER DIODE SW.RT.MTR : ROTARY SWITCH WITH MOTOR
DIODE.ARRAY : DIODE ARRAY SW.SLIDE : SLIDE SWITCH
DIODE.BRG : DIODE BRIDGE SW.TACT : TACT SWITCH
DIODE.CHP : CHIP DIODE TERM.SP : SPEAKER TERMINAL
DIODE.VAR : VARACTOR DIODE TERM.WRAP : WRAPPING TERMINAL
DIODE.ZENR : ZENER DIODE THRMST.CHP : CHIP THERMISTOR
DIODE.Z.CHP : CHIP ZENER DIODE TR : TRANSISTOR
DIODE.PHOT : PHOTO DIODE TR.CHP : CHIP TRANSISTOR
FER.BEAD : FERRITE BEADS TR.DGT : DIGITAL TRANSISTOR
FER.CORE : FERRITE CORE TR.DGT.CHP : CHIP DIGITAL TRANSISTOR

FET.CHP : CHIP FET TR.PAIR : PAIR TRANSISTOR
NS-WSW40
FL.DSPLY : FLUORESCENT DISPLAY TRANS : TRANSFORMER

FLTR.CE : CERAMIC FILTER TRANS.PULS : PULSE TRANSFORMER
FLTR.COMB : COMB FILTER MODULE TRANS.PWR : POWER TRANSFORMER
FLTR.LC.RF : LC FILTER,EMI VARISTOR.C : CHIP VARISTOR
FUSE.CHP : CHIP FUSE VOLT.SELCT : VOLTAGE SELECTOR
GND.MTL : GROUND PLATE VR : ROTARY POTENTIOMETER
GND.TERM : GROUND TERMINAL VR.MTR : POTENTIOMETER WITH MOTOR
JUMPER.CN : JUMPER CONNECTOR VR.SLIDE : SLIDE POTENTIOMETER
JUMPER.TST : JUMPER,TEST POINT VR.SW : POTENTIOMETER WITH SWITCH
L.DTCT : LIGHT DETECTING MODULE VR.TRIM : TRIMMER POTENTIOMETER
79
DIGITAL
Ref No. Part No. Description Remarks Markets
* ZD209500 P.C.B. DIGITAL
CB1 VB390500 CN.BS.PIN 9P 03
CB2 VQ044400 CN.BS.PIN 9P 01
CB102 WK014500 CN 22P 03
CB103 V2303800 CN.BS.PIN 16P 02
* CB104 WV304400 SOCKET 23P 506 SMT
C1 US663100 C.CE.CHP 1000pF 50V 01
C2 US635100 C.CE.CHP 0.1uF 16V 01
C3 WJ932500 C.CE.CHP 1uF 6.3V 01
C6 US663100 C.CE.CHP 1000pF 50V 01
C7 WD758300 C.CE.CHP 10uF 10V 01
C8 US635100 C.CE.CHP 0.1uF 16V 01
C10-11 US635100 C.CE.CHP 0.1uF 16V 01
C12 UF018100 C.EL.CHP 100uF 6.3V 01
C13-15 US635100 C.CE.CHP 0.1uF 16V 01
C17-18 US635100 C.CE.CHP 0.1uF 16V 01
C19 US064100 C.CE.CHP 0.01uF 50V B 01
C20 US635100 C.CE.CHP 0.1uF 16V 01
C21 US662100 C.CE.CHP 100pF 50V
C23-24 US635100 C.CE.CHP 0.1uF 16V 01
C28 WE773800 C.CE.M.CHP 1uF 10V B 01
C29 US064100 C.CE.CHP 0.01uF 50V B 01
C40 US635100 C.CE.CHP 0.1uF 16V 01
C43-44 US635100 C.CE.CHP 0.1uF 16V 01
C45 WE773800 C.CE.M.CHP 1uF 10V B 01
C46 US635100 C.CE.CHP 0.1uF 16V 01
C47 UF018100 C.EL.CHP 100uF 6.3V 01
C50 WF547900 C.CE.CHP 10uF 25V 01
C51 WH046600 C.CE.M.CHP 47uF 16V 03
C52 US663220 C.CE.CHP 2200pF 50V 01
C53-54 V8085400 C.CE.CHP 0.1uF 25V 01
C103 US635100 C.CE.CHP 0.1uF 16V 01
C104 US034680 C.CE.CHP 0.068uF 16V K 01
C105 US643470 C.CE.CHP 4700pF 25V 01
C106 WD758300 C.CE.CHP 10uF 10V 01
C107 US635100 C.CE.CHP 0.1uF 16V 01
C108 WD758300 C.CE.CHP 10uF 10V 01
C109-110 US635100 C.CE.CHP 0.1uF 16V 01
C111 WD758300 C.CE.CHP 10uF 10V 01
C112 US635100 C.CE.CHP 0.1uF 16V 01
C113 WD758300 C.CE.CHP 10uF 10V 01
C114 US635100 C.CE.CHP 0.1uF 16V 01
C116 US661180 C.CE.CHP 18pF 50V 01
C117 US661150 C.CE.CHP 15pF 50V 01
C120 WD758300 C.CE.CHP 10uF 10V 01
C121 UF018100 C.EL.CHP 100uF 6.3V 01
C122-123 WD758300 C.CE.CHP 10uF 10V 01
C124-130 US635100 C.CE.CHP 0.1uF 16V 01
C132 US635100 C.CE.CHP 0.1uF 16V 01

C140-141 US635100 C.CE.CHP 0.1uF 16V 01
NS-WSW40
C144 US635100 C.CE.CHP 0.1uF 16V 01

C146-147 US635100 C.CE.CHP 0.1uF 16V 01
C149 US635100 C.CE.CHP 0.1uF 16V 01
C152 US635100 C.CE.CHP 0.1uF 16V 01
C154-155 US635100 C.CE.CHP 0.1uF 16V 01
C157 US635100 C.CE.CHP 0.1uF 16V 01
C160 US635100 C.CE.CHP 0.1uF 16V 01
* New Parts /
80
DIGITAL and INPUT

C162-163 US635100 C.CE.CHP 0.1uF 16V 01
C166 US635100 C.CE.CHP 0.1uF 16V 01
C175-182 US635100 C.CE.CHP 0.1uF 16V 01
C183 WD758300 C.CE.CHP 10uF 10V 01
C184 UF008220 C.EL.CHP 220uF 4V 01
C185 WD758300 C.CE.CHP 10uF 10V 01
C186 UF018100 C.EL.CHP 100uF 6.3V 01
C187-188 US635100 C.CE.CHP 0.1uF 16V 01
C191 US635100 C.CE.CHP 0.1uF 16V 01
C193 US635100 C.CE.CHP 0.1uF 16V 01
C195-196 US635100 C.CE.CHP 0.1uF 16V 01
C199-200 US635100 C.CE.CHP 0.1uF 16V 01
C201 WF547900 C.CE.CHP 10uF 25V 01
C202 US064100 C.CE.CHP 0.01uF 50V B 01
C203 US643680 C.CE.CHP 6800pF 25V
C204 WD758100 C.CE.CHP 22uF 6.3V 01
C205-206 US635100 C.CE.CHP 0.1uF 16V 01
C207 WD758300 C.CE.CHP 10uF 10V 01
C208 UF148100 C.EL.CHP 100uF 25V 01
C209 WD758100 C.CE.CHP 22uF 6.3V 01
C210-211 US635100 C.CE.CHP 0.1uF 16V 01
D1 WW783900 DIODE 1SS355VM 01
D4-5 WW783900 DIODE 1SS355VM 01
D201 V6267600 DIODE RB051L-40 01
D202 WW783900 DIODE 1SS355VM 01
D203 V2376600 D.SCHOTTKY RB500V-40 01
IC2 YC408A00 IC.MEMORY R1EX25032ASA00A
IC3 YC109A00 IC R3116N271A-TR-F 01
IC4 XR680A00 IC TC7SH08FU(TE85L,JF 01
IC5 X8878A00 IC R1154H033B-T1-FE 01
IC6 X4935A00 IC TC7W14FK INV
IC7 YC109A00 IC R3116N271A-TR-F 01
IC101 YC214A00 IC DIX9210PT(R) 07
IC103 XW234B00 IC TC74VHC244FT(EL,K) 02
IC105 X5693D00 IC.MEMORY M12L16161A-7TG2
IC106 X8387A00 IC TC7WH34FK(TE85L,F) 01
IC201 YE259A00 IC BD9876EFJ-E2 DC/DC
* IC202 YE460A00 IC RP132S121B-E2-FE
Q1 WS625500 FET RZR020P01TL 01
Q2-4 WW782300 TR.DGT DTC044EUBTL
Q5 VV556500 TR 2SA1037K Q,R,S 01
XL1 V9864200 RSNR.CE 10.0MHz 01
XL101 WY459100 RSNR.CRYS 24.576M DSM-0024 01
* ZD209600 P.C.B. INPUT

CB301 V9357000 CN 19P TE
CB304 V8810100 CN 5P TE 01
C301-302 US135100 C.CE.CHP 0.1uF 16V 01
NS-WSW40
C306 US135100 C.CE.CHP 0.1uF 16V 01

C308 WD758300 C.CE.CHP 10uF 10V 01
C309 UR838100 C.EL 100uF 16V 01
C314 US135100 C.CE.CHP 0.1uF 16V 01
C315 WG251600 C.CE.CHP 4.7uF 6.3V 01
C316 US135100 C.CE.CHP 0.1uF 16V 01
C317 WD758300 C.CE.CHP 10uF 10V 01
* New Parts /
81
INPUT and DAMP

C319 WG251600 C.CE.CHP 4.7uF 6.3V 01
C320 US135100 C.CE.CHP 0.1uF 16V 01
C328-335 US135100 C.CE.CHP 0.1uF 16V 01
C336 WH046600 C.CE.M.CHP 47uF 16V 03
C338 US135100 C.CE.CHP 0.1uF 16V 01
Q301 WF057900 TR 2SC2411K Q,R 01
Q302 WS625500 FET RZR020P01TL 01
Q303 WW782300 TR.DGT DTC044EUBTL
Q304 WS625500 FET RZR020P01TL 01
U301-302 WH169900 CN.PHOTO.R 1P GP1FAV51RK0F 04
* WZ620600 P.C.B. DAMP

CB501 VL844800 CN.BS.PIN 4P 01
CB503 WK014500 CN 22P 03
CB505 VL844800 CN.BS.PIN 4P 01
C503 WT440000 C.EL 680uF 35V 03
C507 UR838220 C.EL 220uF 16V 01
C511 UR837220 C.EL 22uF 16V 01
C514 UN837330 C.EL 33uF 16V
C515 US035100 C.CE.CHP 0.1uF 16V B 01
C516 US663100 C.CE.CHP 1000pF 50V 01
C517 US064100 C.CE.CHP 0.01uF 50V B 01
C518 UR837330 C.EL 33uF 16V 01
C520 US035100 C.CE.CHP 0.1uF 16V B 01
C521 WK004400 C.CE.M.CHP 10uF 16V 01
C522 US064100 C.CE.CHP 0.01uF 50V B 01
C523 WD418300 C.CE.CHP 0.33uF 25V K 01
C524-526 US635100 C.CE.CHP 0.1uF 16V 01
C527 US634100 C.CE.CHP 0.01uF 16V 01
C528 US635100 C.CE.CHP 0.1uF 16V 01
C529 US035100 C.CE.CHP 0.1uF 16V B 01
C531 US635100 C.CE.CHP 0.1uF 16V 01
C533 US135100 C.CE.CHP 0.1uF 16V 01
C534 WK004400 C.CE.M.CHP 10uF 16V 01
C536 US135100 C.CE.CHP 0.1uF 16V 01
C538 US135100 C.CE.CHP 0.1uF 16V 01
C540 US135100 C.CE.CHP 0.1uF 16V 01
C542 WK004400 C.CE.M.CHP 10uF 16V 01
C544 US135100 C.CE.CHP 0.1uF 16V 01
C547-548 US135100 C.CE.CHP 0.1uF 16V 01
C550-553 US065100 C.CE.CHP 0.1uF 50V B 01
C558-559 UB044330 C.CE.M.CHP 0.033uF 50V 01
C562 UB044330 C.CE.M.CHP 0.033uF 50V 01
C564-567 WS765300 C.CE.CHP 1uF 35V 01
C572 UB044330 C.CE.M.CHP 0.033uF 50V 01
C574-577 US063100 C.CE.CHP 1000pF 50V B 01

C582-583 WN110600 C.CE.M.CHP 4.7uF 25V 01
NS-WSW40
C586-587 WN110600 C.CE.M.CHP 4.7uF 25V 01

C590 US065100 C.CE.CHP 0.1uF 50V B 01
C591-592 WZ203300 C.CE.CHP 0.47uF 50V K
C593 US065100 C.CE.CHP 0.1uF 50V B 01
C597-598 WG348100 C.EL 470uF 35V 01
C601-604 V8085400 C.CE.CHP 0.1uF 25V 01
C617-620 US064100 C.CE.CHP 0.01uF 50V B 01
* New Parts /
82
DAMP and POWER

C623 US063100 C.CE.CHP 1000pF 50V B 01
C625 US063100 C.CE.CHP 1000pF 50V B 01
C627-628 US063100 C.CE.CHP 1000pF 50V B 01
C631-632 US662100 C.CE.CHP 100pF 50V
C643 US635100 C.CE.CHP 0.1uF 16V 01
C644 US065100 C.CE.CHP 0.1uF 50V B 01
D501 WW783900 DIODE 1SS355VM 01
IC501 X4153A00 IC KIA7812API 02
IC502 X9716A00 IC TAS5086 07
IC503 X9776A00 IC TAS5342LDDV 08
IC506 XV190A00 IC NJM2904M OP AMP 01
L501 VP939500 R.MTL.FLM 1 1W 01
R538-541 WD204100 R.CHP 2.2 1/2W F
R562-563 VP940400 R.MTL.OXD 100 1W 02
* ZD209000 P.C.B. POWER J

* ZD209100 P.C.B. POWER UC
* ZD209200 P.C.B. POWER TKAFLH
* ZD209300 P.C.B. POWER BG
* ZD209400 P.C.B. POWER V
CB701 VG879900 CN.BS.PIN 2P 01
CB702-703 WN103000 CLIP.FUSE TP00351-31 01
CB801 V8809700 CN 5P SE 01
CB861 V2303800 CN.BS.PIN 16P 02
C701 V5877700 C.MYLAR 0.22uF 250V 03
C702 WH035900 C.CE.SAFTY 1000pF 250V JUCV 01
C702 WQ856900 C.CE.SAFTY 470pF 250V TKABGFH
C704 V5877700 C.MYLAR 0.22uF 250V 03
C705 WN826300 C.CE.SAFTY 0.01uF 250V 01
C706 US063220 C.CE.CHP 2200pF 50V B 01
C707 US062100 C.CE.CHP 100pF 50V B 01
C711 WV675300 C.CE.M.CHP 0.1uF 50V
C712 VZ243300 C.CE.CHP 0.22uF 16V 01
C713 WP573900 C.EL 560uF 200V JUCV
C713 WP574000 C.EL 150uF 400V TKABGFH
C714 VZ243300 C.CE.CHP 0.22uF 16V 01
C715 US063120 C.CE.CHP 1200pF 50V B 01
C716 US065100 C.CE.CHP 0.1uF 50V B 01
C717 WV675300 C.CE.M.CHP 0.1uF 50V
C718 WP340600 C.EL 47uF 35V 01
C719 WJ322400 C.CE.M.CHP 0.01uF 250V JUCV 01
C719 WJ322300 C.CE.M.CHP 1000pF 630V TKABGFH 01

C720 WJ322300 C.CE.M.CHP 1000pF 630V TKABGFH 01
NS-WSW40

C722 WK413800 C.CE.M.CHP 1000pF 250V 01
C723 UR868330 C.EL 330uF 50V 01
C724 UR866100 C.EL 1uF 50V 01
C726 UR849220 C.EL 2200uF 25V 03
C728 WY528300 C.EL 2200uF 25V
C729 US046100 C.CE.CHP 1uF 25V 01
* New Parts /
83
POWER
C730 WY528300 C.EL 2200uF 25V
C733 WV675300 C.CE.M.CHP 0.1uF 50V
C734 UR837470 C.EL 47uF 16V 01
C736 US065100 C.CE.CHP 0.1uF 50V B 01
C738 WN987600 C.CE.M.CHP 1uF 50V 01
C740 UR849220 C.EL 2200uF 25V 03
C741 US063100 C.CE.CHP 1000pF 50V B 01
C743 US046100 C.CE.CHP 1uF 25V 01
C744 UR818100 C.EL 100uF 6.3V 01
C746 US062100 C.CE.CHP 100pF 50V B 01
C750 WV675300 C.CE.M.CHP 0.1uF 50V
C801 US135100 C.CE.CHP 0.1uF 16V 01
C802 WD758300 C.CE.CHP 10uF 10V 01
C803 US135100 C.CE.CHP 0.1uF 16V 01
C861 UM387470 C.EL 47uF 16V 01
C862 US135100 C.CE.CHP 0.1uF 16V 01
C863 US062100 C.CE.CHP 100pF 50V B 01
D702 WP061900 DIODE.BRG RS1505M-B-C-J82 J 04
D702 WJ441800 DIODE.BRG RS605M-B-C-J81 UCTKABGFLVH
D703 VN478200 DIODE D1NL20U 01
D704 WS699700 DIODE.ZENR HZU22B2 TRF-E 01
D705 WJ459300 DIODE D1FK60-5063 JUCV 01
D705 WJ151900 DIODE STTH110A TKABGFH 03
D706 WY727900 DIODE.ZENR P6KE200A 200V
D707 VN478200 DIODE D1NL20U 01
D708 WY727900 DIODE.ZENR P6KE200A 200V TKABGFH
D709-710 WR897300 DIODE RR264M-400TR 01
D712 V4756800 DIODE.BRG S1NB60 1A 600V 01
D713 WY447600 DIODE RF2001T2D
D715 WS694900 DIODE.ZENR HZU6.2B3 TRF-E
D720-721 WS694900 DIODE.ZENR HZU6.2B3 TRF-E
D831 WZ467600 LED AN5306X-B262 02
D861-866 WP354200 LED GREEN 01
D867 V8066800 LED.2COLOR RED/GREEN SML72423 01
D868-869 WP354200 LED GREEN 01
F701 WG410400 FUSE 5A 125V JUCV 01
F701 KB000690 FUSE T2.5A 250V TKABGFH 01
IC701 X9806A00 IC L6566BTR SW DENGEN 04
IC702 WP388200 PHOT.CPL TLP781(D4-GR,F) 01
IC703 X6770A00 IC NJM431U(TE1) 01
IC705 X6647A00 IC UPC1943T 04
IC801 X8371A00 IC TC7SH02FU(TE85L,JF
Q701 WT856700 FET SPA21N50C3 JUCV
Q701 WY454200 FET IPA90R500C3 TKABGFH
Q702 VV556400 TR 2SC2412K Q,R,S 01
Q703 VV655400 TR.DGT DTC114EKA 01
Q704 VV556500 TR 2SA1037K Q,R,S 01
Q705 VV556400 TR 2SC2412K Q,R,S 01

Q861-870 WC434800 TR.DGT KRA102S-RTK/P 01
NS-WSW40
R722 WJ624900 R.CHP 8.2K 1W JUCV

R722 WJ625000 R.CHP 33 1W TKABGFH
* New Parts /
84
POWER
R728-729 WP582800 R.CEMENT 0.18 5W K JUCV 02
R729 WS277600 R.WW 0.15 5W TKABGFH
R733 VP940500 R.MTL.OXD 150 1W 01
R745 WF548800 R.CEMENT 0.12 5W 02
R749-750 VP941400 R.MTL.OXD 3.3K 1W 01
R765 WB784800 R.MTL.FLM 8.2 1W J
RY701 WE513800 RELAY DC HRM3H-DC12V 03
ST801 V4040500 SCR.TERM M3 01
SW841-844 WD483100 SW.TACT SKRGAAD010 01
T701 YD526A00 TRANS.PWR JUCV 05
T701 YD527A00 TRANS.PWR TKABGFH
* T702 YE382A00 TRANS.PWR J
* T702 YE383A00 TRANS.PWR UC
* T702 YE385A00 TRANS.PWR TKABGFH
* T702 YE384A00 TRANS.PWR V
TH701 WF128900 PTC.THERM NTPAA5R1LDNB0 5.1 TKABGFH
TH702 WF875300 PTC.THERM NTPAN4R0LDKB0 4.0 JUCV 05
U861 WH981800 L.DTCT GP1UE261RKVF 02
WE983600 SCR.BND.HD 3x8 MFZN2B3 01
NS-WSW40
* New Parts /
85
NS-WSW40
MAIN
* ZD209900 P.C.B. MAIN J
* ZD210000 P.C.B. MAIN UC
* ZD210100 P.C.B. MAIN TK
* ZD210200 P.C.B. MAIN A
* ZD210300 P.C.B. MAIN BGF
* ZD210400 P.C.B. MAIN LH
* ZD210500 P.C.B. MAIN V
CB1-2 VT658100 TERM.WRAP 352-TX119 01
CB5 VQ044400 CN.BS.PIN 9P 01
CB7-8 WN077700 CLIP.FUSE CLIP PFC5000-0202F
C1 VR168700 C.MYLAR 0.22uF 50V 01
C2 VR168400 C.MYLAR 0.12uF 50V 01
C3 V6185300 C.CE.SAFTY 0.01uF 275V 01
C4-5 VR168500 C.MYLAR.ML 0.15uF 50V 01
C6-7 WB540200 C.POL.MTL 0.1uF 250V
C8 VR169000 C.MYLAR 0.33uF 50V 01
C9 VR169200 C.MYLAR 0.47uF 50V 01
C10 WJ610700 C.MYLAR 0.027uF 100V
C11 WJ608900 C.MYLAR 1000pF 100V 01
C12 VR168300 C.MYLAR 0.1uF 50V 01
C13 US064100 C.CE.CHP 0.01uF 50V B 01
C14 UR867100 C.EL 10uF 50V 01
C15 US063100 C.CE.CHP 1000pF 50V B TKBGF 01
C16 US061220 C.CE.CHP 22pF 50V B TKBGF 01
C17 UR867100 C.EL 10uF 50V 01
C19 UR867100 C.EL 10uF 50V 01
C22 UR867220 C.EL 22uF 50V 01
C23-24 WG587700 C.EL 4700uF 50V 05
C25 UR838100 C.EL 100uF 16V 01
C26 US063100 C.CE.CHP 1000pF 50V B 01
C27-28 UR867220 C.EL 22uF 50V 01
C29 WJ610800 C.MYLAR 0.033uF 100V
C31 US062100 C.CE.CHP 100pF 50V B 01
C33-34 UR867220 C.EL 22uF 50V 01
C35-36 UR867100 C.EL 10uF 50V 01
C37 UR867220 C.EL 22uF 50V 01
C38 UR867100 C.EL 10uF 50V 01
C39 UR838100 C.EL 100uF 16V 01
C40 WJ608900 C.MYLAR 1000pF 100V 01
C41-42 US065100 C.CE.CHP 0.1uF 50V B 01
C43 V5877700 C.MYLAR 0.22uF 250V 03
C44 UR849220 C.EL 2200uF 25V 03
C45-47 US046100 C.CE.CHP 1uF 25V 01
C48 UR838100 C.EL 100uF 16V 01
C49 UR868330 C.EL 330uF 50V 01
C51 UA354820 C.MYLAR 0.082uF 50V 01

C54 UR867100 C.EL 10uF 50V 01
NS-WSW40
C55 US063100 C.CE.CHP 1000pF 50V B 01

D1 VR745300 LED SLR-34MC3 GREEN 01
D2 WR897300 DIODE RR264M-400TR 01
D3 WF300200 DIODE.BRG TS4B03G 4A 200V 04
D4-5 WW783900 DIODE 1SS355VM 01
D6-7 WS698200 DIODE.ZENR HZU15B3 TRF-E
D8-11 WW783900 DIODE 1SS355VM 01
* New Parts /
86
NS-WSW40
MAIN
D12-13 WS697400 DIODE.ZENR HZU12B2 TRF-E 01
D14 V4756800 DIODE.BRG S1NB60 1A 600V 01
D15 WR897300 DIODE RR264M-400TR 01
D16-17 WS694900 DIODE.ZENR HZU6.2B3 TRF-E
F1 WG409700 FUSE 1.6A 125V JUCV 01
F1 KB000660 FUSE 400mA 250V TKABGFLH 02
G1 V5995800 PLATE.GND
IC1-2 X2331A00 IC NJM4580E OP AMP 01
IC3 XN169A00 IC KIA7805PI 5V 02
* Q1 ZC242500 TR KTC2026
Q2 ZA348800 TR KTA1046-Y-U/PFY 01
Q3 V7421800 TR 2SA1312-GR,BL 01
Q4-5 VJ927100 TR 2SC2712-Y(TE85R,F) 01
Q6 V7421800 TR 2SA1312-GR,BL 01
Q7 WC883400 TR 2SD2704 K
Q8 V7421800 TR 2SA1312-GR,BL 01
Q9 WC883400 TR 2SD2704 K
Q10 VJ927200 TR 2SA1162-Y(TE85R,F) 01
Q11 V7421800 TR 2SA1312-GR,BL 01
Q12 WF549900 TR 2SC3906K T146 R,S 01
Q13 VJ927100 TR 2SC2712-Y(TE85R,F) 01
Q14 V3966800 TR 2SA949 O,Y 02
Q15 VR325600 TR 2SC2229 O,Y 01
Q16 VJ927200 TR 2SA1162-Y(TE85R,F) 01
Q17 VJ927100 TR 2SC2712-Y(TE85R,F) 01
* Q18 ZC733600 TR.PAIR STD01P/N O,Y
Q20 VJ927100 TR 2SC2712-Y(TE85R,F) 01
Q21 WF549900 TR 2SC3906K T146 R,S 01
Q22 V7421800 TR 2SA1312-GR,BL 01
Q23 VJ927100 TR 2SC2712-Y(TE85R,F) 01
Q24 WY028100 TR.DGT KRC402-RTK/P
Q25 V3966800 TR 2SA949 O,Y 02
Q26 WY028300 TR.DGT KRC404-RTK/P 01
R1 WW864800 R.CAR.FP 1.5K 1/4W
R2 WW864700 R.CAR.FP 1.2K 1/4W
R15 WW861100 R.CAR.FP 1 1/4W
R20-21 WW861100 R.CAR.FP 1 1/4W
R51-52 WW861300 R.CAR.FP 2.2 1/4W
R53-54 WW863000 R.CAR.FP 56 1/4W
R55 WW861300 R.CAR.FP 2.2 1/4W
R56 VC760500 R.MTL.OXD 470 2W 01
R57-58 VC751900 R.MTL.OXD 0.22 2W 01
R59 WW862100 R.CAR.FP 10 1/4W 01
R61 V6022600 R.CEMENT 0.1 3W
R67 VC745400 R.MTL.OXD 150 1W 01
RY1 VU161600 RELAY DC OSA-SS-224DM3 05
RY2 WE513800 RELAY DC HRM3H-DC12V 03
ST1 V4040500 SCR.TERM M3 01
ST4 V4040500 SCR.TERM M3 01

SW1-2 VF541200 SW.SLIDE SSSF11 02
NS-WSW40
SW3 VQ751500 SW.TACT SKHHLMA010 01

* T1 YE664A00 TRANS.SUB J
* T1 YE665A00 TRANS.SUB UC
* T1 YE666A00 TRANS.SUB TKBGFLH
* T1 YE667A00 TRANS.SUB A
* T1 YE669A00 TRANS.SUB V
* New Parts /
87
NS-WSW40
DAC
* ZD210600 P.C.B. DAC
CB601 V2215900 CN.BS.PIN 17P 01
CB602 V8875600 CN 13P TE 02
CB651 V9357000 CN 19P TE
CB652 V8875300 CN.PLUG 13P SE 01
C601 US035100 C.CE.CHP 0.1uF 16V B 01
C602 WD758300 C.CE.CHP 10uF 10V 01
C607-608 US135100 C.CE.CHP 0.1uF 16V 01
C609-610 WD758300 C.CE.CHP 10uF 10V 01
C611-612 UF037100 C.EL.CHP 10uF 16V 01
C613-614 US063150 C.CE.CHP 1500pF 50V B 01
C615 US035100 C.CE.CHP 0.1uF 16V B 01
C616 UF138220 C.EL.CHP 220uF 16V 01
C617 US065100 C.CE.CHP 0.1uF 50V B 01
C619-620 US063100 C.CE.CHP 1000pF 50V B 01
D601 WW783900 DIODE 1SS355VM 01
IC601 X7356A00 IC PCM1780DBQR 04
* Q601 WY028000 TR.DGT KRC401-RTK/P
Q602 WY028300 TR.DGT KRC404-RTK/P 01
* Q603 WY029400 TR.DGT KRA302-RTK/P
Q604 VV556500 TR 2SA1037K Q,R,S 01
Q605-606 WC883400 TR 2SD2704 K
ST651 V4040500 SCR.TERM M3 01
NS-WSW40
* New Parts /
88
Carbon Resistors
Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No.
1.0 HJ35 3100 HF85 3100 11 k HF45 7110 HF45 7110
1.8 HJ35 3180 12 k HJ35 7120 HF85 7120
2.2 HJ35 3220 HF85 3220 13 k HF45 7130 HF45 7130
3.3 HJ35 3330 HF85 3330 15 k HF45 7150 HF45 7150
4.7 HJ35 3470 HF85 3470 18 k HF45 7180 HF45 7180
5.6 HJ35 3560 HF85 3560 22 k HF45 7220 HF45 7220
10 HF45 4100 HF45 4100 24 k HF45 7240 HF45 7240
15 HJ35 4150 HF85 4150 27 k HJ35 7270 HF85 7270
22 HF45 4220 HF45 4220 30 k HF45 7300 HF45 7300
27 HJ35 4270 HF85 4270 33 k HF45 7330 HF45 7330
33 HF45 4330 HF45 4330 36 k HF45 7360 HF45 7360
39 HJ35 4470 HF85 4390 39 k HF45 7390 HF45 7390
47 HF45 4470 HF45 4470 47 k HF45 7470 HF45 7470
56 HF45 4560 HF45 4560 51 k HF45 7510 HF45 7510
68 HF45 4680 HF45 4680 56 k HF45 7560 HF45 7560
75 HF45 4750 HF45 4750 62 k HF45 7620 HF45 7620
82 HF45 4820 HF45 4820 68 k HF45 7680 HF45 7680
91 HF45 4910 HF45 4910 82 k HF45 7820 HF45 7820
100 HF45 5100 HF45 5100 91 k HF45 7910 HF45 7910
110 HJ35 5110 HF85 5110 100 k HF45 8100 HF45 8100
120 HF45 5120 HF45 5120 110 k HF45 8110 HF45 8110
150 HF45 5150 HF45 5150 120 k HF45 8120 HF45 8120
160 HJ35 5160 130 k HF45 8130
180 HF45 5180 HF45 5180 150 k HF45 8150 HF45 8150
200 HF45 5200 HF45 5200 180 k HF45 8180 HF45 8180
220 HF45 5220 HF45 5220 220 k HJ35 8220 HF85 8220
270 HF45 5270 HF45 5270 270 k HF45 8270 HF45 8270
330 HF45 5330 HF45 5330 300 k HF45 8300 HF45 8300
390 HF45 5390 HF45 5390 330 k HF45 8330 HF45 8330
430 HF45 5430 HF45 5430 390 k HJ35 8390 HF85 8390
470 HF45 5470 HF45 5470 470 k HF45 8470 HF45 8470
510 HF45 5510 HF45 5510 560 k HJ35 8560 HF85 8560
560 HF45 5560 HF45 5560 680 k HJ35 8680 HF85 8680
680 HF45 5680 HF45 5680 820 k HJ35 8820 HF85 8820
820 HF45 5820 HF45 5820 1.0 M HF45 9100 HF45 9100
910 HF45 5910 HF45 5910 1.2 M HJ35 9120
1.0 k HF45 6100 HF45 6100 1.5 M HJ35 9150 HF85 9150
1.2 k HF45 6120 HF45 6120 1.8 M HJ35 9180 HF85 9180
1.5 k HF45 6150 HF45 6150 2.2 M HJ35 9220 HF85 9220
1.8 k HF45 6180 HF45 6180 3.3 M HJ35 9330 HF85 9330
2.0 k HJ35 6200 HF85 6200 3.9 M HJ35 9390
2.2 k HF45 6220 HF45 6220 4.7 M HJ35 9470 HF85 9470
2.4 k HJ35 6240 HF85 6240
2.7 k HF45 6270 HF45 6270
3.0 k HF45 6300 HF45 6300
1/4W Type
3.3 k HF45 6330 HF45 6330
HF45
3.6 k HJ35 6360 HF85 6360
1/4W Type 1/6W Type
3.9 k HF45 6390 HF45 6390
HJ35 HF85
4.7 k HF45 6470 HF45 6470 10mm
5mm
5.1 k HF45 6510 HF45 6510
5.6 k HF45 6560 HF45 6560
6.8 k HF45 6680 HF45 6680
8.2 k HF45 6820 HF45 6820
9.1 k HF45 6910 HF45 6910
10 k HF45 7100 HF45 7100
: Not available
89
A B C D E F G H I J
1
OVERALL ASSEMBLY 45
3
45
42
16
41
44
51 21
41 45
47
51 19 42 17
3 45
44 41 1-43 42
21
46
41 45
45
5
44
1-5
4
1-16 51
51 8 51
1-15 1-43
2 9
1-43
44
1-1 (1) 21
2-3 1-1 (4) 41 1-1 (5)
200 2-3
2-3
5
2-4 1-61
1-1 (3) 1-4 19
11 1-43 1-43
200-1 202 1-43
1-46 21
46
44 1-14
1-42
6
203
51 1-43
1-41
5
44 1-2
44 1-43
1-41 1-3
205 J model
204 J model
1-1 (2)
7 51
90
Ref No. Part No. Description Remarks Markets Ref No. Part No. Description Remarks Markets
* 1-1 ZD209000 P.C.B. ASSEMBLY POWER J ACCESSORIES
* 1-1 ZD209100 P.C.B. ASSEMBLY POWER UC * 200 ZC949500 REMOTE CONTROL FSR63 000-002300800 J
* 1-1 ZD209200 P.C.B. ASSEMBLY POWER TKAFLH * 200 ZC949400 REMOTE CONTROL FSR62 000-002300790 UCTKABGFLVH
* 1-1 ZD209300 P.C.B. ASSEMBLY POWER BG 200-1 AAX70730 BATTERY COVER CG-8912 04
* 1-1 ZD209400 P.C.B. ASSEMBLY POWER V 202 WE818100 OPTICAL CABLE 1.5m 1pc 06
* 1-2 ZD209500 P.C.B. ASSEMBLY DIGITAL * 203 ZD237600 MOUNTING TEMPLATE 886x79 1pc
* 1-3 ZD209600 P.C.B. ASSEMBLY INPUT * 204 ZD875700 TRANSMITTER for iPod YIT-W12TXA Black 1pc J
* 1-4 WZ620600 P.C.B. ASSEMBLY DAMP * 205 ZE323800 USB CABLE A/micro B, 0.3m 1pc TPY4018-010207 J
1-5 MFA22060 FLEXIBLE FLAT CABLE 22P 60mm P=1 01 BATTERY R03,AAA,UM-4 2pcs
* 1-14 ZD292000 SUPPORT AirWired WH BGF
* 1-14 ZC642800 SUPPORT AirWired BL JUCTKABGFLVH SERVICE TOOLS
* 1-15 ZC642000 BARRIER SHEET WZ064500 RS-232C CONVERSION ADAPTOR V4.0 with CABLE 9P 13
1-16 WV904100 SHEET 10x18x0.5 02 ZD896000 FLEXIBLE FLAT CABLE 9P 150mm P=1.25 SUPPORTING TAPE
1-41 WE774100 BIND HEAD BONDING B-T. SCREW 3x8 MFZN2B3 01
1-43 WF002600 PW HEAD B-TIGHT SCREW 3x8 MFZN2W3 01
1-46 WS603200 PUSH RIVET P3045 01
* 1-61 ZD300300 P.C.B. ASSEMBLY AWCD2A
* 2 ZD211600 BAFFLE ASSEMBLY with GRILLE YAS-CU201 WH BGF
* 2 ZD206500 BAFFLE ASSEMBLY with GRILLE YAS-CU201 BL J
* 2 ZD206600 BAFFLE ASSEMBLY with GRILLE YAS-CU201 BL UCTKABGFLVH
* 2 ZD212700 BAFFLE ASSEMBLY with GRILLE ATS-CU2010 BL U
* 2-3 ZC642900 LENS LED
2-4 WY690100 LENS IR 01
* 3 ZD211800 CABINET ASSEMBLY WH BGF
* 3 ZD206700 CABINET ASSEMBLY BL JUCTKABGFLVH
5 YD670A00 DRIVER FULL-RANGE 5.5cm 6 C055K01Y1100 06
8 WZ527200 POWER CABLE 1.8m J 07
* 8 WB120500 POWER CABLE 2m UC
8 WV836600 POWER CABLE 2m T 05
* 8 WC753000 POWER CABLE 2m K
* 8 WC743700 POWER CABLE 2m A
* 8 WB212200 POWER CABLE 2m B
8 WB212300 POWER CABLE 2m GFL 04
* 8 WC992700 POWER CABLE 2m V
* 8 WY094600 POWER CABLE 1.8m H
9 V2438700 CORD STOPPER 10P1 02
* 11 ZC641900 BUTTON 4P WH BGF
* 11 ZC641800 BUTTON 4P BL JUCTKABGFLVH
* 16 ZD240600 LIGHT GUIDE BAR
* 17 ZC876500 SUPPORT WH BGF
* 17 ZC648100 SUPPORT BL JUCTKABGFLVH
* 19 ZC643200 STAND WH BGF
* 19 ZC643100 STAND BL JUCTKABGFLVH
* 21 ZD512700 SHEET LEG
41 WE774100 BIND HEAD BONDING B-T. SCREW 3x8 MFZN2B3 01
42 WE774400 BIND HEAD B-TIGHT SCREW 3x8 MFZN2B3 01
44 WE774800 BIND HEAD P-TIGHT SCREW 3x8 MFZN2W3 01
45 WF268000 BIND HEAD P-TIGHT SCREW 3x10 MFZN2B3 01
46 WF492100 BIND HEAD TAPPING SCREW 4x8 MFZN2B3 01
47 WF265300 PW HEAD P-TIGHT SCREW 3x8-8 MFZN2B3 01
51 WG136600 PACKING 300x6x1 01
* New Parts / Finish / ..... WH: White color, BL: Black color * New Parts / Finish / ..... WH: White color, BL: Black color
91
A B C D E F G H I J
NS-WSW40
1
OVERALL ASSEMBLY
* 1-1 ZD209900 P.C.B. ASSEMBLY MAIN J
1-2 (2) * 1-1 ZD210000 P.C.B. ASSEMBLY MAIN UC
1-34 1-36 * 1-1 ZD210100 P.C.B. ASSEMBLY MAIN TK
1-32 21
1-50 1-51 * 1-1 ZD210200 P.C.B. ASSEMBLY MAIN A
21 1-32 1-32
1-21 * 1-1 ZD210300 P.C.B. ASSEMBLY MAIN BGF
1-34
1-19 * 1-1 ZD210400 P.C.B. ASSEMBLY MAIN LH
2 1-35 * 1-1 ZD210500 P.C.B. ASSEMBLY MAIN V
* 1-2 ZD210600 P.C.B. ASSEMBLY DAC
1-24
1-20 21 1-3 V9436200 POWER CABLE 2m J 04
1-1 (3) 1-3 V9436300 POWER CABLE 2m UC
1-2 (1) 1-11 1-3 WV837400 POWER CABLE 2m T
1-32
1-3 V8012900 POWER CABLE 2m K 06
1-31 1-3 WC883100 POWER CABLE 2m A
1-3 WC906500 POWER CABLE 2m B
1-35
21 1-3 V9436400 POWER CABLE 2m GF
3 1-3 WD042000 POWER CABLE 2m V
1-3 WZ697200 POWER CABLE 1.8m H
1-35
1-1 (1) 1-4 CB072750 CORD STOPPER SR-4N-4 01
1-4 * 1-6 X5312C00 POWER TRANSFORMER J
1-1 (2) 1-6 * 1-6 X5313C00 POWER TRANSFORMER UC
1-3 * 1-6 YE671A00 POWER TRANSFORMER TK
1-23
* 1-6 X5315C00 POWER TRANSFORMER A
* 1-6 X5316C00 POWER TRANSFORMER BGFLH
1-1 (4)
1-23 * 1-6 YE670A00 POWER TRANSFORMER V
1-7 VV849300 RADIATION SHEET 19x24 01
4 1-33 * 1-11 ZD132800 REAR PANEL J
* 1-11 ZD132900 REAR PANEL UC
* 1-11 ZD133000 REAR PANEL TK
2
* 1-11 ZD133100 REAR PANEL A
1-23 * 1-11 ZD133200 REAR PANEL BGF
* 1-11 ZD133300 REAR PANEL LVH
1-7
* 1-19 ZD142500 COVER
4 * 1-20 ZD147900 SPACER
5 * 1-21 ZD244300 PACKING 112x50x1
1-23 WA201400 PACKING 202x6x1 01
5 21
* 1-24 ZD153600 BUSHING 44x24x12
3 1-23 1-31 WE994800 BIND HEAD S-TIGHT SCREW 4x8 MFZN2B3 01
1-32 WE774400 BIND HEAD B-TIGHT SCREW 3x8 MFZN2B3 01
1-33 WE774600 HEXAGONAL HEAD B-TIGHT SCREW 3x18 MFZN2W3 01
1-34 WF268000 BIND HEAD P-TIGHT SCREW 3x10 MFZN2B3 01
1-35 WF002600 PW HEAD B-TIGHT SCREW 3x8 MFZN2W3 01
21 1-36 WE774100 BIND HEAD BONDING B-T. SCREW 3x8 MFZN2B3 01
* 1-50 ZD300400 P.C.B. ASSEMBLY AWCD2B
* 1-51 MFA17060 FLEXIBLE FLAT CABLE 17P 60mm P=1.0
6 * 2 ZD212100 CABINET ASSEMBLY WH BGF
* 2 ZD208800 CABINET ASSEMBLY BL JUCTKABGFLVH
* 3 ZD122600 FRONT GRILLE ASSEMBLY WH BGF
* 3 WZ083300 FRONT GRILLE ASSEMBLY BL JUCTKABGFLVH
4 X2323C00 DRIVER SUBWOOFER 16cm 6 JA1689 11
* 5 ZC760800 FRONT PANEL WH BGF
* 5 WY421300 FRONT PANEL BL JUCTKABGFLVH
21 WE955200 BIND HEAD TAPPING SCREW 4x20 MFZN2B3 01
* 25 WZ668700 NONSKID PAD D32 T2 4pcs/set
7 25
* New Parts / Finish / ..... WH: White color, BL: Black color
92
A B C D E F G H I J
1 REMOTE CONTROL
FSR62 (U, C, T, K, A, B, G, F, L, V, H models) / FSR63 (J model)
SCHEMATIC DIAGRAM PANELS
+3V
VDD
FSR62 FSR63
E2
(U, C, T, K, A, B, G, F, L, V, H models) (J model)
D1
IR diode
C1 U1
47uF M34286G2GP 30
2
2 E2 18
D0
Q1 3 17 13 2 32
R2 E1 D1
19 16
CARR D2
100 ohms 20
VDD D3 15 11 31
1 14
VSS D4
VSS 4 XIN 13 25 16 5 6
D5
5 XOUT D6 12
R1 6 E0 D7 11
17 4 9
1 ohm 1/4W 7 10 FSR63
G0 G3 (J model)
XIN
8 G1 G2 9 8 24
X1
3 4MHz
7 3
G1
G0
E0
These PADs are test point for ISP in the production line
4
KEY NO. LAYOUT KEY CODE
Key Name
Key Key
FSR62 FSR63
No. Code
2 (U, C, T, K, A, B, G, F, L, V, H models) (J model)
2 STANDBY/ON 78-CC
3 4 5 3 TV TV 78-DF
5 4 BD/DVD BD/DVD 78-4A

6 7 8 9
5 YIT YIT 78-29
FSR63
(J model)
6 CLEAR VOICE 78-5C
11 13 7 UNIVOLUME 78-8A
8 AUDIO DELAY 78-24
9 D 78-A5
16 17 11 SURROUND 78-B4
6 13 STEREO 78-50
16 SUBWOOFER + 78-4C
24 25
17 VOLUME + 78-1E
30 24 SUBWOOFER 78-4D
31 32 25 VOLUME 78-1F
30 MUTE 78-9C
31 TV REMOTE CONTROL LEARN TV 78-38

7
32 TV REMOTE CONTROL REPEATER TV 78-39
93
INSTALLATIONS
Removing the stands
Place the sound bar on a flat surface such as on top of a TV When the sound bar blocks the view of the lower part of the TV 1 Attach the mounting template on a wall and mark for the
cabinet. screen or the remote control sensor of the TV, remove the stands screw holes.
Place the subwoofer to the outside of the sound bar. To reduce (18 mm [3/4]) of the sound bar to adjust its height.
echoes from the wall, face the front side of the subwoofer slightly Tapes or thumbtacks
HINT
inward.
r6TFUIF573FNPUF3FQFBUFSGVODUJPOUPUSBOTNJU57SFNPUFDPOUSPMTJHOBMTWJB Mounting template (supplied)
the sound bar.
Screw holes
2 Remove the mounting template from the wall and install

the commercially available screws at the marks on the
wall.
NOTE
r,FFQUIFTUBOETBOETDSFXTJOBTBGFQMBDFGPSGVUVSFVTF
7 to 9 mm
Attaching the sound bar to a wall (1/4" to 3/8")
4 mm (#8)
20 mm (3/4") or
2 to 4 mm (1/16" to 3/16") more
3 Hang the sound bar on the screws.
Mounting holes
on rear of sound bar
Cautions
r %POPUQMBDFUIFTPVOECBSPOVOEFSBOZPUIFSEFWJDFTTVDIBT#%QMBZFS
JOBQJMF%PJOHTPNBZDBVTFBNBMGVODUJPOEVFUPWJCSBUJPOT
r %POPUUPVDIUIFHSJMMFPOUIFGSPOUBOECPUUPNPGUIFTPVOECBS
r 1MBDFUIFTPVOECBSBXBZGSPNZPVS57NPSFUIBONN u
TPBTOPUUP
damage your TV with rear panel of the sound bar.
r %FQFOEJOHPOZPVSJOTUBMMBUJPOFOWJSPONFOU JUNBZCFCFUUFSUPDPOOFDU
the sound bar and external devices (such as a TV) before installing the
sound bar. Cautions Cautions
r 8IFOJOTUBMMJOHUIFTPVOECBSPOBXBMM BMMJOTUBMMBUJPOXPSLNVTU r 'JYUIFDBCMFTJOQMBDFXIFSFUIFZXJMMOPUCFDPNFMPPTF*GZPVSGPPUPS
be performed by a qualified contractor or dealer. The customer must hand accidentally gets caught on a loose cable, the sound bar may fall.
never attempt to perform this installation work. Improper or inadequate
r $IFDLUIBUUIFTPVOECBSJTGJYFETFDVSFMZBGUFSUIFJOTUBMMBUJPO:BNBIB
installation could cause the sound bar to fall, resulting in personal injury.
will bear no responsibility for any accidents caused by improper
r %POPUBUUBDIUIFTPVOECBSUPBXBMMUIBUJTNBEFPGXFBLNBUFSJBMTTVDI installations.
BTQMBTUFSPSWFOFFSFEXPPET%PJOHTPNBZDBVTFUIFTPVOECBSUPGBMM
r .BLFTVSFZPVVTFDPNNFSDJBMMZBWBJMBCMFTDSFXTUIBUDBOTVQQPSUUIF
weight of the installation (specified in Step 2). Using clamps other than
specified screws, such as short screws, nails, and two-sided tape, may
cause the sound bar to fall.
94

BD

5 cm

NS-WSW40
95

18 mm


NS-WSW40
96
7 9 mm 4 mm
20 mm
2 4 mm


NS-WSW40
97
NS-WSW40

Yamaha Yas-201 Ats-2010 PDF

Uploaded by

Copyright:

Available Formats

Yamaha Yas-201 Ats-2010 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Yamaha Yas-201 Ats-2010 PDF

Uploaded by

Copyright:

Available Formats

FRONT SURROUND SYSTEM YAS-201/ATS-2010

SOUND BAR YAS-CU201/ATS-CU2010

DISASSEMBLY PROCEDURES / ........... 1724 REMOTE CONTROL .....................................................93

UPDATING FIRMWARE / INSTALLATIONS ..........................................................94

Copyright (c) Yamaha Corpration All rights reserved.

TO SERVICE PERSONNEL AC LEAKAGE

WARNING: CHEMICAL CONTENT NOTICE!

About lead free solder /

YAS-201 YAS-CU201 NS-WSW40

Front view Side view

YAS-CU201 (B, G, F models)

YAS-CU201 (L, H models)

NS-WSW40 (T model) NS-WSW40 (A model)

NS-WSW40 (B, G, F models) NS-WSW40 (V model)

NS-WSW40 (L, H models) NS-WSW40 (J model)

REMOTE CONTROL PANELS

Minimum RMS Output Power / Finish /

Maximum Effective Output Power / (JEITA) U, C, T, K, A, B, G, F, L, V, H, J models ................. Black color

Residual Noise / (IHF-A weighted)

Standby Power Consumption /

U, C, V, J models ..............................................Less than 2.0 W

B, G, F models ................................................. AC 230 V, 50 Hz

* Specifications are subject to change without notice.

1 MAIN (1) P.C.B.

Precaution for handling measuring instrument

Safety measures OFF

Note that the capacitors indicated below are dangerous YAS-CU201/ATS-CU2010

Precaution for handling measuring instrument

1. Removal of Light Guide Bar 1.

Note when installing the light guide bar

Left channel side

Light guide bar

2. Removal of Cabinet Assembly 2. Ass'y

3. Removal of Amp Unit 3.

4. Removal of Top Frame 4.

POWER (5) P.C.B.

5. Removal of DAMP P.C.B. 5. DAMP P.C.B.

6. Removal of AWCD2A and POWER (4) P.C.B.s 6. AWCD2APOWER4P.C.B.

7. Removal of DIGITAL and INPUT P.C.B.s 7. DIGITALINPUT P.C.B.

8. Removal of POWER (1) P.C.B. 8. POWER1P.C.B.

POWER (4) P.C.B.

When checking the P.C.B.s: P.C.B.

Ground lead DAMP P.C.B.

POWER (2) P.C.B.

POWER (5) P.C.B.

POWER (1) P.C.B.

Rubber sheet and cloth

POWER (4) P.C.B.

1. Removal of Front Grille Assembly 1. Ass'y

2. Removal of Driver Subwoofer 2.

3. Removal of Rear Panel Assembly 3. Ass'y

Rubber sheet and cloth

Rear panel assembly

4. Removal of AWCD2B P.C.B. 4. AWCD2B P.C.B.

AWCD2B P.C.B. DAC (2) P.C.B.

CB652 Rear panel assembly

DAC (1) P.C.B.

When checking the P.C.B.: P.C.B.

Rear panel ass'y