Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 199 views

    Sika PDS E Intraplast ZX

    Uploaded by

    lwin_oo2435
    Intraplast ZX is a powder admixture that expands cement grout by introducing microbubbles. It improves grout fluidity, strength, cohesion and frost resistance while filling all cavities. It is used for grouting prestressed cables, bearing plates, tunnels and soil/rock anchoring. The admixture allows a reduction in water needs, prevents bleeding and premature setting. It is dosed at 1-2% by weight of cement and requires a 3-4 minute mix with a water/cement ratio of 0.40-0.45 for best results. Proper testing is needed for important applications due to various impacting factors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sika PDS E Intraplast ZX

    Uploaded by

    lwin_oo2435
    199 views2 pages
    Intraplast ZX is a powder admixture that expands cement grout by introducing microbubbles. It improves grout fluidity, strength, cohesion and frost resistance while filling all cavities. It is used for grouting prestressed cables, bearing plates, tunnels and soil/rock anchoring. The admixture allows a reduction in water needs, prevents bleeding and premature setting. It is dosed at 1-2% by weight of cement and requires a 3-4 minute mix with a water/cement ratio of 0.40-0.45 for best results. Proper testing is needed for important applications due to various impacting factors.

    Original Description:

    Sika Concrete Repair Products

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Intraplast ZX is a powder admixture that expands cement grout by introducing microbubbles. It improves grout fluidity, strength, cohesion and frost resistance while filling all cavities. It is used for grouting prestressed cables, bearing plates, tunnels and soil/rock anchoring. The admixture allows a reduction in water needs, prevents bleeding and premature setting. It is dosed at 1-2% by weight of cement and requires a 3-4 minute mix with a water/cement ratio of 0.40-0.45 for best results. Proper testing is needed for important applications due to various impacting factors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    199 views2 pages

    Sika PDS E Intraplast ZX

    Uploaded by

    lwin_oo2435
    Intraplast ZX is a powder admixture that expands cement grout by introducing microbubbles. It improves grout fluidity, strength, cohesion and frost resistance while filling all cavities. It is used for grouting prestressed cables, bearing plates, tunnels and soil/rock anchoring. The admixture allows a reduction in water needs, prevents bleeding and premature setting. It is dosed at 1-2% by weight of cement and requires a 3-4 minute mix with a water/cement ratio of 0.40-0.45 for best results. Proper testing is needed for important applications due to various impacting factors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Product Data Sheet

    Version 30/10/2008

    Intraplast ZX
    Extra Expanding Grout Admixture


    Description Intraplast ZX is a ready to use extra expanding grout admixture in powder
    form. It is non toxic,non flammable and does not contain chlorides or other

    ingredients of corrosive nature. Intraplast ZX causes the cement mixture
    to expand before setting. By introducing micro bubbles into the wet mix,
    volume expansion and increased fluidity results without segregation.

    Intraplast ZX reduces the separation of water (bleeding) from the mixture.
    It prevents premature setting and allows a reduction in the amount of gaug
    ing water.

    Uses Intraplast ZX is special product for the grouting of prestressed cable
    ducts, bearing plate, tunnel linings and rock and soil anchoring. The use

    of Intraplast ZX with the grouting mixture has the following advantages:
    - Improved fluidity.
    - Good strength and adhesion properties.
    - Increased cohesion.
    - High Volume expansion in the wet state.
    - Protective action against corrosion of prestressing wires.
    - Durable and dense filling of all cavities.
    - Increased frost resistance.
    - Prolonged workability.

    Application Intraplast ZX is dosed at 1-2 % by weight of cement. Depending on the
    type of mixer and purpose of the injection, the mixing time and the water/
    cement ratio must be in accordance with the requirements. For prestressed
    concrete work where batching the mixture is done in the usual mechanical
    way. A mixing time of 3-4 minutes together with a water/cement ratio of
    0.40-0.45 is found to give best results. Generally the most suitable mixing

    sequence is the water/cement/Intraplast ZX.
    It is not recommended to add sand for prestressed concrete work.

    Intraplast ZX 1/2
    D00501021008E

    Important Intraplast ZX is essentially a product for use by specialised enterprises
    working in the field of applied prestressing and grouting techniques.
    It is know that the properties of the grout damixture can be significantly
    influenced by the mixing procedure, cement properties, adding of
    water, and temperatures. For important work it is necessary to
    determine the most suitable procedure by means of preliminary site
    tests. Cement containing fly ash is not suitable for use with

    Intraplast ZX.

    Technical Data

    Colour White

    Apparent Density 0.7 kg/l

    Storage Conditions Dry

    Shelf Life 2 years in sealed and undamaged bags.

    Packaging Supplied in bags containing 30 packs of 0.5 kg.

    Intraplast ZX 2/2

    You might also like