Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 579 views

    Simple Low Power Inverter Circuit (12V DC To 230V or 110V AC) Using CD4047 and IRFZ44 Power MOSFET

    Uploaded by

    sajid
    This document summarizes a simple low power DC to AC inverter circuit that uses a CD4047 IC and IRFZ44 power MOSFETs. The circuit converts 12V DC input to 220V or 110V AC output by using the CD4047 IC in astable multivibrator mode with an external capacitor. The output frequency is controlled with resistors and a variable resistor. The circuit can power light loads like lights during power outages or charge devices in vehicles. It uses the CD4047 IC to generate oscillating signals that drive the IRFZ44 MOSFETs, acting as switches to generate the AC output across a transformer.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Simple Low Power Inverter Circuit (12V DC To 230V or 110V AC) Using CD4047 and IRFZ44 Power MOSFET

    Uploaded by

    sajid
    579 views3 pages
    This document summarizes a simple low power DC to AC inverter circuit that uses a CD4047 IC and IRFZ44 power MOSFETs. The circuit converts 12V DC input to 220V or 110V AC output by using the CD4047 IC in astable multivibrator mode with an external capacitor. The output frequency is controlled with resistors and a variable resistor. The circuit can power light loads like lights during power outages or charge devices in vehicles. It uses the CD4047 IC to generate oscillating signals that drive the IRFZ44 MOSFETs, acting as switches to generate the AC output across a transformer.

    Original Description:

    project proposal

    Original Title

    New Microsoft Word Document

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes a simple low power DC to AC inverter circuit that uses a CD4047 IC and IRFZ44 power MOSFETs. The circuit converts 12V DC input to 220V or 110V AC output by using the CD4047 IC in astable multivibrator mode with an external capacitor. The output frequency is controlled with resistors and a variable resistor. The circuit can power light loads like lights during power outages or charge devices in vehicles. It uses the CD4047 IC to generate oscillating signals that drive the IRFZ44 MOSFETs, acting as switches to generate the AC output across a transformer.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    579 views3 pages

    Simple Low Power Inverter Circuit (12V DC To 230V or 110V AC) Using CD4047 and IRFZ44 Power MOSFET

    Uploaded by

    sajid
    This document summarizes a simple low power DC to AC inverter circuit that uses a CD4047 IC and IRFZ44 power MOSFETs. The circuit converts 12V DC input to 220V or 110V AC output by using the CD4047 IC in astable multivibrator mode with an external capacitor. The output frequency is controlled with resistors and a variable resistor. The circuit can power light loads like lights during power outages or charge devices in vehicles. It uses the CD4047 IC to generate oscillating signals that drive the IRFZ44 MOSFETs, acting as switches to generate the AC output across a transformer.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 3

    Introduction

    Simple low power Inverter Circuit (12V DC to 230V or 110V AC) using CD4047 and IRFZ44
    power MOSFET: -

    This simple low power dc to ac inverter (dc to ac converter) circuit converts 12V DC to 220V
    or 110V AC. By doing simple modification you can also convert 6V DC to 230V AC or 110V AC.
    It can be used as inverters for home needs to enable light loads (electric bulb, CFL, etc) at the
    time of electricity failure.
    This circuit can also be used in the vehicles to charge your laptop or mobile phone etc.
    Circuit diagram of DC to AC Inverter Circuit
    Components

    IC CD4047
    IC CD4047 will work in the astable multivibrator mode. To work it in astable multivibrator
    mode we need an external capacitor which should be connected between the pin1 and pin3.
    Pin2 is connected by the resistor and a variable resistor to change the change the output
    frequency of the IC. Remaining pins are grounded. The pins 10 and 11 are connected to the
    gate of the mosfets IRF540. The pin 10 and 11 are Q and ~Q from these pins the output
    frequencies is generated with 50% duty cycle.

    Resistors (1K, 18K, 100- 0.5W x 2)


    Pin2 is connected by the resistor and a variable resistor to change the change the output
    frequency of the IC.

    Capacitor (0.22F)
    To work IC in astable multivibrator mode we need an external capacitor which should be
    connected between the pin1 and pin3.

    12V rechargeable battery


    In the circuit diagram, we can observe that 12V battery is connected to the pin8 of the IC
    4047 which is VCC or power supply pin and also to pin 4 and 5 which are astable
    and complement astable of the IC.

    Battery charger circuit


    This is the circuit which is used to charge the 12-volt dc battery.

    IRFZ44 MOSFET x 2
    The output frequency is connected to the mosfets through resistor which will help to prevent
    to the loading of the mosfets. The main AC current is generated by the two mosfets which
    will act as two electronic switches. The battery current is made to flow upper half or positive
    half of the primary coil of transformer through Q1 this is done when the pin 10 becomes high
    and lower half or negative half is done by opposite current flow through the primary coil of
    transformer, this is done when pin 11 is high. By switching the two mosfets current is
    generated.

    You might also like