Lab Session 5ppt

Lab Session 5
Feedback/Machine
Control Systems
BE(EL)/TE(ME)
Prepared by: Talha Javed Soleja

Lecturer
Electrical Engg.Department( NED UET)
Objective: To understand modelling of physical control systems using SIMULINK
Model Overview for This Tutorial

You can use Simulink to model a system and then simulate the dynamic behavior of that system. The basic
techniques you use to create the simple model in this tutorial are the same techniques that you use for more complex
models.
To create this simple model, you need four Simulink blocks. Blocks are the model elements that define the
mathematics of a system and provide input signals:
Sine Wave Generate an input signal for the model.
Integrator Process the input signal.
Bus Creator Combine multiple signals into one signal.
Scope Visualize and compare the input signal with the output signal.
Simulating this model integrates a sine wave signal to a cosine signal and then displays the result, along with the
original signal, in a Scope window.
Open New Model in Simulink Editor
Use the Simulink Editor to build your models.
1.Start MATLAB. From the MATLAB Tool strip, click the Simulink button .
A short delay occurs the first time you open Simulink.
Click the Blank Model template, and then click the Create Model button.
The Simulink Editor opens with a new block diagram.
Select File > Save as. In the File name text box,
enter a name for your model, For
example, simple_model.slx. Click Save.
Open Simulink Library Browser

From the Simulink Library Browser you can search
for blocks to use in your model. Also, you can
create a new Simulink model, project, or
Stateflow chart.
1.From the Simulink Editor toolbar, click
the Simulink Library button .
Set the Library Browser to stay on top of the other desktop windows. On the Library Browser toolbar, select
the Stay on top button .
Browse or Search for Specific Blocks

To browse through the block libraries, select a MathWorks product and then a functional area in the left pane. To
search all of the available block libraries, enter a search term.
1.Search for a Sine Wave block. In the search box on the browser toolbar, enter sine, and then press the Enter
key. Simulink searches the libraries for blocks with sine in their name or description, and then displays the blocks.
1.Get detailed information about a block. Right-click a block, and then select Help for the <block name>. The
Help browser opens with the reference page for the block.
2.View block parameters. Right-click a block, and then select Block Parameters. The block parameters dialog
box opens.
Add Blocks to Model

You build models by dragging blocks from the Simulink Library Browser window to the Simulink Editor or
single-clicking your model and entering a search term.
To build the simple model, begin by copying blocks from the Simulink Library Browser to the Simulink Editor.
1.In the left pane of Simulink Library Browser, select the Sources library.
2.From the right pane, select the Sine Wave block.
1.Drag the Sine Wave block to the Simulink Editor. A copy of the Sine Wave block appears in your model.
2.Add a Scope block using this alternative procedure:

a.Click within the block diagram.
b.After the search icon appears, type scope, and then from the list, select Scope
Add the following blocks to your model using one of the approaches you used to add the Sine Wave
and Scope blocks.
Your model should now have the blocks you need for the simple model.
Library Block
Continuous Integrator
Signal Routing Bus Creator
Move ,Resize & connect Blocks
Before you connect the blocks in your
model, arrange the block inputs and
outputs to make signal connections as
straightforward as possible.
1.Move the Scope block after the Bus
block output. You can either:
Click and drag the block.
Select the block, and then press
the arrow keys on your keyboard.
2.Move the blocks until your model looks
similar to the following figure.
Define Configuration Parameters
Before you simulate the behavior of your model, you can modify
the default values for the configuration parameters. The
configuration parameters include the type of numerical solver, start
time, stop time, and maximum step size.
1.From the Simulink Editor menu, select Simulation > Model
Configuration Parameters. The Configuration Parameters dialog
box opens to the Solver pane.
2.In the Stop time field, enter 20. In the Max step size field,
enter 0.2. With the Solver parameter set to auto, Simulink
determines the best numerical solver for simulating your model.
Tip Alternatively, you can open the

Model Configuration Parameters dialog
box by clicking the parameters
button on the Simulink Editor toolbar.
1.Click OK.
Run Simulation
After you define the configuration parameters, you are ready to simulate your model.
1.From the Simulink Editor menu bar, select Simulation > Run.
2.The simulation runs, and then stops when it reaches the stop time specified in the Model Configuration
Parameters dialog box.
The simple model consists of three blocks: Step,
Transfer Function, and Scope. The Step is
a Source block from which a step input signal
originates. This signal is transferred through
the line in the direction indicated by the arrow to
the Transfer Function Continuous block.
The Transfer Function block modifies its input signal
and outputs a new signal on a line to the Scope.
The Scope is a Sink block used to display a signal
much like an oscilloscope.
Modifying Blocks
A block can be modified by double-clicking on it. For
example, if you double-click on the Transfer
Function block in the Simple model, you will see the
following dialog box.
This dialog box contains fields for the numerator and

the denominator of the block's transfer function. By
entering a vector containing the coefficients of the
desired numerator or denominator polynomial, the
desired transfer function can be entered. For
example, to change the denominator to
enter the following into the denominator field

[1 2 4]
and hit the close button, the model window will
change to the following,
which reflects the change in the denominator of the
transfer function.
The Step block can also be double-clicked, bringing up
the following dialog box.
Building Systems
In this section, you will learn how to build
systems in Simulink using the building blocks
in Simulink's Block Libraries. You will build
the following system.
Drag the Step block from the Sources window into

the left side of your model window.
Click on the Math Operations listing in the main Simulink
window.
From this library, drag a Sum and Gain block into the
model window and place them to the right of
the Step block in that order.
Click on the Continuous listing in the main Simulink
window.
First, from this library, drag a PID Controller block into the
model window and place it to the right of the Gain block.
From the same library, drag a Transfer Function block
into the model window and place it to the right of the PID
Controller block.
Click on the Sinks listing in the main Simulink window.
Drag the Scope block into the right side of the model window.
Modify Blocks
Follow these steps to properly modify the blocks in your
model.
Double-click on the Sum block. Since you will want the
second input to be subtracted, enter +- into the list of signs
field. Close the dialog box.
Double-click the Gain block. Change the gain to 2.5 and
close the dialog box.
Double-click the PID Controller block and change the
Proportional gain to 1 and the Integral gain to 2. Close the
dialog box.
Double-click the Transfer Function block. Leave the
numerator [1], but change the denominator to [1 2 4]. Close
the dialog box. The model should appear as:
Draw a line connecting the Sum block
output to the Gain input. Also draw a
line from the Gain to the PI Controller, a
line from the PI Controller to the Plant,
and a line from the Plant to the Scope.
You should now have the following
The line remaining to be drawn is the feedback

signal connecting the output of the Plant to the
negative input of the Sum block. This line is
different in two ways. First, since this line loops
around and does not simply follow the shortest
(right-angled) route so it needs to be drawn in
several stages. Second, there is no output
terminal to start from, so the line has to tap off of
an existing line.
Drag a line off the negative portion of
the Sum block straight down and release the
mouse so the line is incomplete. From the
endpoint of this line, click and drag to the line
between the Plant and the Scope. The model
should now appear as follows.

Lab Session 5ppt

Uploaded by

Copyright:

Available Formats

Lab Session 5ppt

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Lab Session 5ppt

Uploaded by

Copyright:

Available Formats

Lab Session 5

Prepared by: Talha Javed Soleja

Model Overview for This Tutorial

Open Simulink Library Browser

Browse or Search for Specific Blocks

Add Blocks to Model

2.Add a Scope block using this alternative procedure:

Tip Alternatively, you can open the

This dialog box contains fields for the numerator and

enter the following into the denominator field

Drag the Step block from the Sources window into

The line remaining to be drawn is the feedback

You might also like