SINAMICS GL150 medium-voltage converters

Robust and reliable performance for high power and starting applications

siemens.com/sinamics-gl150
 Portfolio

The reliable and complete range

Medium-voltage drives from Siemens

SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS

PERFECT HARMONY PERFECT HARMONY GM150 SM150 SM120 CM GL150 SL150
GH180 GH150

180 kVA10 MVA 430 MVA 110.1 MVA 3.45.8 MVA 6.313.7 MVA 1.4 - 19.4 MVA 2.918.8 MVA
(air-cooled) (water-cooled) (air-cooled) (air-cooled) (water-cooled) (air-cooled) (air-cooled)
524.4 MVA 024 MVA 4.640 MVA 685 MVA 1240 MVA
(water-cooled) (water-cooled) (water-cooled) (water-cooled) (water-cooled)
(higher power
on request)

Output voltage Output voltage Output voltage Output voltage Output voltage Output voltage Output voltage
2.311 kV 4.167.2 kV 2.34.16 kV 3.3 kV (IGCT & IGBT) 3.37.2 kV 1.410.3 kV 1.54 kV
4.16 kV (IGBT)

Multi-cell voltage Multi-cell voltage 3-level NPC voltage 3-level NPC voltage Customizable modular Load-Commutated Cycloconverter (CC)
source inverter (PH VSI) source inverter source inverter source inverter voltage source system inverter (LCI)
(M2C VSI) (DFE VSI) (AFE VSI) (VSI)

Air- and water-cooled Water-cooled Air- and water-cooled Air- and water-cooled Water-cooled Air- and water-cooled Air- and water-cooled

Setting the benchmark Well-proven foundation

Around the globe our SINAMICS drives set the benchmark Based on well-proven technological concepts, we are con-
for quality and reliability. With the most diverse portfolio tinually developing our medium-voltage drives to provide:
of drives in the industry, we can better supply the right
Increasingly higher reliability for our drives and your
drive solution every time. Our portfolio features:
operation
Voltage classes from 2.3 to 13.8 kV Improved safety
A seamless range of power ratings from 150 kW to up Continuously reducing our drive footprints
to 85 MW (and even higher on request) Constantly lowering the energy and service
All levels of dynamic response and performance requirements
Single-motor drives and multi-motor systems Reducing maintenance costs
Motor speeds from 10 rpm to 15,000 rpm in the Simplifying the handling process thoughout engineer-
Megawatt range ing, installation, integration, commissioning
The decisive plus when it comes to experience Enhancing and simplifying the operator control
Everywhere it involves the highest degrees of availability, Always the optimum solution
our customers rely on our drives to support their critical We can offer you the optimum drive for any conceivable
applications. Siemens has been offering legendary levels medium voltage application that utilizes a drive system.
of reliability and performance for over four decades. Our We have the widest range of drive converter technology in
market-leading performance and quality is not by accident the industry, from Load-Commutated Inverters (LCI), using
it is the result of our commitment to our customers, our thyristor technology, to Voltage-Source Inverters (VSI) with
focus on innovation and our extensive experience and HV-IGBTs/IGCTs, to our more modular cell-based drive Topol-
know-how that started back in 1969 with our first LCI ogies (with LV IGBTs) that offer greater Voltage/Power scal-
drive. ability and motor friendliness. It is time to stop selecting
a drive that requires supplementary equipment in order to
meet your applications needs and instead choose the
drive that is best designed to meet and exceed your appli-
cations performance specifications and goals.

2
 LCI drives

For large synchronous motors

SINAMICS GL150 LCI drives

Robust technology at a reasonable price Innovation in low power range

The SINAMICS GL150 drive is the cost-effective solution The converter power section of the air-cooled
for large synchronous motors using LCI (Load-Commu- SINAMICS GL150 has been upgraded to provide an
tated Inverter) technology. There is no upper limit for the optimized solution in the lower power range to meet
power rating and the technology is extremely rugged current market requirements.
and reliable. By using thyristors, the number of compo-
With new options and compact design, the new converter
nents has been reduced to an absolute minimum. Its
power section is tailored to the starting applications and
simple and compact design makes the SINAMICS GL150
perfectly suited for retrofit business.
extremely reliable and with very little maintenance
required.
Suitable for soft starting or continuous duty operation
SINAMICS GL150 at a glance
SINAMICS GL150 is designed for single-motor drives for
applications with either square-law or constant load char- Air-cooled up to 19.4 MW
acteristics, as starting converter for soft starting or as con- Water-cooled up to 85 MW without parallel
tinuous duty drive converter for variable-speed processes. connection (higher power available on request)
Perfect for synchronous motors
Inherent regenerative capability
Compact design with highest power density per m3
Its circuitry means that it is suitable for 4-quadrant
Simple plant integrations
operation without any additional costs i.e. it can be
used for driving and braking in both directions of rotation. Easy-to-use operator control and monitoring
Extremely reliable
Maximum efficiency:
Low-maintenance design
Up to 50% lower energy requirement
Seamless integration into higher-level automation
For pumps, fans and compressors with square-law load systems
characteristic, the SINAMICS GL150 fully utilizes an
Offers other key features such as arc-fault-tested
important feature of variable-speed drive technology
design and control redundancy
the energy efficiency: It reduces the energy consumption
by up to 50%.
3
 Applications

For large high-power synchronous motors

and starting converter applications
The SINAMICS GL150 drive is optimally suited for numer- GL150 supports large synchronous motor applications
ous directly driven applications. The SINAMICS GL150 is such as:
also frequently used as a starting converter for large Large high-speed compressors and pumps
synchronous motors. The recent innovations with the air- Main marine drives, booster drives, shaft generators
cooled drive also expand the capabilities and increase the
Boiler feed pumps
feasibility of the drives. Motors and generators to support
lower power applications in directly driven or starting Starting blast furnaces
applications. Wire rod mills
Starting generators in pumped-storage power plant

SINAMICS GL150 drives serve some of the most demanding applications all around the world in industries such as:

Marine Power generation

Oil and gas Metals

4
 Features & Benefits

Stress-free operation in a compact,

space-saving design
Fuseless operation Even more compact
In the SINAMICS GL150, we have completely eliminated By reducing the number of components, over the years,
fuses in the power electronics. We are able to do this the drive units have become increasingly more compact.
because thyristors are dimensioned to ensure they can han- This is complemented by the modular drive converter
dle over-current situations. In addition to the thyristor com- concept. The patented LCI design is extremely compact
ponents, over-currents are also detected on both the line and space-saving. The circuit configuration means signifi-
side and the motor side, and are limited by the transformer cantly smaller DC links can be used. Negatively coupled
on the line side. reactors are 40% smaller than non-coupled devices.
No stress on the motor and line supply High efficiency
The motor voltage is generated from a separately excited The LCI concept also increases the efficiency in other im-
synchronous motor and not by the drive. This principle portant areas: The drive efficiency is extremely high (99%)
means that there are no voltage gradients (dv/dt) that as a result of the low switching losses and the low-loss
stress the motor. thyristor technology. As a result, this reduces the demands
placed on the cooling system and also the space required
The motor insulation only has to be designed for the
for the installation.
supply voltage and increased insulation is not required
as protective measure against steep voltage edges and
peaks. On the motor side, the SINAMICS GL150 is available
in a 12-pulse configuration to reduce the harmonics and
on the line side in a 24-pulse configuration. This fulfills
even the most stringent specifications regarding harmonics.

Features Customer benefits

Compared to VSI drives, most cost-competitive solution Widely accepted solution for marine applications,
for large power ratings starting applications and general-purpose applications
above 30MVA
Rugged thyristor devices provide highest power at Highest power density results in a compact design
lowest parts count Highly reliable
Very high efficiency
Patented DC reactor is an important differentiating Highly compact design
feature Fault-tolerant
Regenerative capability is inherent to the design Regeneration without additional cost
Robust against line supply failures
Optional control redundancy For higher availability requirements
Arc-fault-tested design Maximum safety
Integration in SINAMICS control platform Simplifies plant integrations, installation and
operation
Mature and proven LCI topology Competitive drive solution
Over 40 years of experience Reassurance of proven reliability and continued
Large installed base support

5
 Reliability

Reliability and efficiency

at the highest level

SINAMICS GL150 air-cooled compact and innovative design Air-cooled version of SINAMICS GL150 power section
for high power rating

Perfect for high-speed synchronous motors with the Higher motor voltages can be achieved by using a high
highest ratings number of thyristors with a high blocking capability in
SINAMICS GL150 is admirably suited for directly driven a series circuit.
high-speed compressors and pumps. SIMOVERT S from The series thyristor circuits for the highest power ratings
Siemens the predecessor of the SINAMICS GL150 con- can be optionally configured corresponding to an n+1
trols the speed of the highest-rated high-speed compres- redundant design. This further increases the availability.
sor drive ever built. Frequently, SINAMICS GL150 is used One of the advantages of the patented arrangement of
as a starting converter to softly start large synchronous the DC link reactors is the insensitivity to a single ground
motors for instance, for blast furnace blowers. In this fault. The power unit as well as the closed-loop control
case, a SINAMICS GL150 brings the multi-megawatt can be redundantly configured as an option to achieve the
motors up to the line synchronous speed and then trans- highest availability.
fers them over to the line supply.
Over four decades of reliability LCI drives
The simple and rugged concept of LCIs from Siemens has
been ensuring maximum availability with a high degree of
cost-effectiveness for three decades now. The combina-
tion of extremely rugged thyristor technology in a fuseless
design, combined with an intelligent response to external
disturbances, makes these drive units extremely reliable
requiring little maintenance. The LCI concept is based on
a combination of synchronous motor and simple thyristor
bridges on the line and motor sides.
The two thyristor bridges are force-commutated and no
forced commutation circuitry is required. This makes the
power electronics extremely simple and rugged. Liquid-cooled version of the SINAMICS GL150 power unit

6
 Redundancy

Leading-edge technology
that is easy to handle

Technology based on the latest drive generation Functioning in case of failure:

Four decades but always representing state-of-the-art In case of any software faults or breakdown of control
technology: SINAMICS GL150 is the latest generation of components in the active system, the stand-by system
our LCI drives. It remains an ultra-modern drive unit due to immediately takes over control of the drive. In case of
digitalization of its operation via: almost all conceivable faults and critical warnings in the
control system, the complete converter remains avail-
Full digital control, including transvector control
able with 100% of its power and performance after
State-of-the-art software tools for commissioning switching over.
PROFIBUS interface Due to the high-performance SINAMICS software and
Fully digital, including transvector control, state-of-the-art control hardware, the transition happens automati-
software tools for commissioning and PROFIBUS interface. cally and needs less than 100ms. As a result, there is
The last item specifically allows for these drive units to be no critical loss of speed or torque. The switching-over
seamlessly integrated into Totally Integrated Automation procedure has practically no effect on the application
the higher-level automation environment of Siemens as process.
well as additional analog and digital interfaces. The thyris- If there are any failures (power supply, error in the
tor modules are optoelectronically gated and the thyristors CPU cyclic operation, software faults, etc.) in the
are individually monitored. stand-by system, it will have no influence on the
motor current or the voltage.
Benefits of redundancy concept
Increased MTBF rates
Improved fault tolerance
Higher serviceability
Reduced potential breakdown time
The new redundant control system option is fully automatic.
It is a further development of proven and extremely reliable
concept for marine applications, such as cruise liners where
the SINAMICS GL150 serves as the main propulsion drive.

7
 Innovation

Improved air-cooled for applications

from 1.4 MW to 9 MW

SINAMICS GL150 air-cooled innovation

The new design is characterized by:
The upgraded power part completes the low end of
power range of the SINAMICS GL150 family portfolio as The use of proven and reliable SINAMICS GL150
single drive for applications with a quadratic, constant components
load characteristic. Compact dimensions
The new line-up consists of: Reduction of parts
6/6 pulse drives up to 5 MW Compact design of the DC-link reactor thanks to
12/12 pulse drives up to 9 MW forced cooling (weight reduction)
Optimized busbars that permit the integration of
Typical applications for air-cooled converters in this the internal disconnector option (avoiding the
power range are: need for an additional cabinet)
Starting converter for large synchronous motors Stable cabinet covers without doors in the mid-volt-
and gas-turbine sets age section (arc-fault- and earthquake-tested design)
Starting converter for pumps and fans Accessibility of the low-voltage section, even during
operation
A special line-side fuses retrofit option integrated
in the design
Line-side internal synchronization voltage sensing
(only for starting converters)

8
Innovation

9
 Soft starting

Getting everything up
and running just right

Circuit-breaker

Converter transformer Starting

converter
control
Line-side
thyristor converter

DC link with reactors

Motor-side
Synchronizing
thyristor converter control

Step-up transformer

Bypass circuit-breaker

High-voltage
synchronous motor
Block diagram of a starting
converter in this case, for
two synchronous motors Excitation equipment

SINAMICS GL150 as starting converter

for soft and reliable starting
When used as starting converter, SINAMICS GL150 can
bring a maximum of four multi-Megawatt motors up to
the synchronous line supply frequency and then transfer
them over to the line supply. The transfer is bumpless
which reduces the stress on the line supply and the com-
plete mechanical transmission line. The consequence
less wear and a longer equipment lifetime.
Using SINAMICS GL150, even blast furnace blowers with
power ratings above 50 MW can be started from stand-
still and transferred over to the line supply within one to
two minutes. With this starting technique, the rotor is
not thermally stressed as the motor is already operated
in sync with the supply voltage starting from zero speed.
This is quite a different situation than when using either
a reactor or auto-transformer start. The rate of success-
ful starts lies above 99% and is therefore significantly
higher than when using conventional starting tech-
niques. This represents a decisive step in achieving
higher availability and better cost-effectiveness with
blast furnace systems.

10
 Commissioning

From installation to operation

in no time

Medium-voltage drives the simple way Commissioning made easy

Not only is the technological concept of the STARTER is the standard commissioning tool for all drives
SINAMICS GL150 simple and rugged. Installation, belonging to the SINAMICS family. Without requiring any
integration into the plant and operator control are also special system know-how, the commissioning engineer
simple and straightforward. All of the closed-loop control can configure even the most complex systems in a short
functions, the power supply, the signal adaptation time thanks to the simple, menu-prompted operator inter-
elements and the terminals for external signals are face. Functions can be checked and parameters optimized
accommodated in a system cabinet thus eliminating using integrated test routines. Trace functions graphically
several integration steps. show signal characteristics therefore simplifying drive
optimization and diagnostics.
Simple integration into the plant
Integration into the plant is simplified as a result of the
low envelope dimensions of the unit regardless of
power rating and its high degree of flexibility when it
comes to the configuration. In addition to that, all of the
open-loop control and power electronics, the excitation
supply, the incoming switchgear and all of the auxiliaries
can be installed in special prefabricated containers. This
reduces construction and installation costs. Lastly, the
drive system arrives on site already tested, which can sig-
nificantly reduce your project and commissioning times.

11
 Compatible motors

Best prerequisites for maximum

security against failure
Synchronous motors and drives from Siemens

Unbeatable range of drive products

Siemens synchronous motors at a glance
Siemens is globally the No. 1 for medium-voltage drives and
Power for high-voltage motors. The range of units covers all conceiv-
5100MW and more able medium- and high-voltage applications in all major pro-
ratings
cess industries, and across all voltage classes and power
Voltages 1.613.2 kV ratings.

Shaft Confidence-building experience

7101,250mm
heights For many decades now, Siemens has been one of the leading
suppliers of LCI drives that have ratings extending up into
Speed up to 6,300rpm the high double-digit megawatt range. They have been run-
ning in combination with our HV motors for years in some
No. of poles 28 instances for decades around the world, driving compres-
sors, pumps, blowers, extruders, kneaders and crushers with
Degree of some of the highest power ratings.
IP55
protection
SIMOTICS HV high-voltage motors
Explosion
Ex p, Ex n The extensive portfolio of SIMOTICS HV high-voltage motors
protection
has the solution that precisely fits each and every high-volt-
Air-to-air heat exchanger age industrial application. They set themselves apart as a
Cooling
Air-to-water heat exchanger result of their outstanding reliability and performance, as
well as the range of motors, with power ratings up to
Sleeve bearings, 100 MW and voltage classes up to 13.2 kV.
Bearings
active magnetic bearings

65-MW compressor motor running at 3,600 rpm Soon to be winging its way to site: A 24-MW One of the two 21-MW motors
for the first completely electric gas liquefaction motor for the West-to-East Pipeline in China for the main drive of a cruise ship
system in the world in Hammerfest/Norway

12
 Compatible motors

The system partner on the motor side All of this together with the extremely high mechanical
more than just reliable strength and thermal endurance ensure an extremely long
Together with SINAMICS GL150, Siemens synchronous winding lifetime. The bearings also have extremely long
motors form a perfectly Integrated Drive System: lifetimes and require hardly any maintenance.
Whether for high-speed compressors with the highest Motors with integrated safety
power rating for transporting or liquefying gas, or large
Siemens synchronous motors are equipped as standard
extruders and water pumps or for main ships drives,
with bearing and winding monitoring devices to cope
these rugged synchronous motors are the foundation
with even the most extreme situations. It goes without
for maximum reliability.
saying that all of the synchronous motors are available in
The enclosure, bearings, active parts, ventilation and cool- explosion-protected versions: With pressurized enclosure
ing system are perfectly harmonized with one another. Ex p for gas explosion protection, Zone 1. For high-speed
The materials, components and production techniques synchronous motors, we also offer oil-lubricated sleeve
utilized have been carefully selected with this objective bearings or active magnetic bearings. When using mag-
in mind. netic bearings, an extremely wide speed control range can
be implemented for instance, 6006,300 rpm at 23 MW
The Micalastic insulating system that Siemens uses for
when fed from a SINAMICS GL150.
all our high-power high-voltage motors has proven itself
over many years of operation in applications all around
the world. An important component is the VPI insulation
technique (Vacuum Pressure Impregnation) which allows
the motor to be connected directly to the line supply and
MV drive. The insulation has a high switching and revers-
ing strength as a result of the high winding overhang
stiffness and excellent corona shielding.

35-MW motor running at 5,040 rpm for a 23-MW motor running at 6,300 rpm to pump 42-MW motor for the blast furnace
compressor station of a gas pipeline from gas south of Groningen/The Netherlands blower in the Anshan steelworks, China
Great Britain to Belgium

13
SINAMICS GL150 Technical data

Specifications
Power connection Closed-loop control
Line supply voltage Vector control with and without speed encoder
Air cooling: up to 5.4kV +/ 10% Separately excited synchronous motors can be connected
Water cooling: up to 12kV +/ 10% (excitation equipment is available separately)
Frequency: 50/60Hz +/ 3% Operation as starting converter
Line supply power factor: approx. 0.82 at rated speed and load Operation as continuous duty drive
Either from the top or bottom Speed accuracy:  0.1% without encoder,
Motor connection 0.01% with encoder
Motor voltage Torque accuracy: +/ 3%
Air cooling: up to 4.8kV Field-weakening operation
Water cooling: up to 11kV Starting converter: 1:8
Either from the top or bottom Continuous duty drive: 1:1.5
Auxiliary power supply Maximum output frequency: 125Hz
Air-cooled: 1
 AC 230 V 10%, 50/60 Hz 3%
Standards
3 AC 400 V 10%, 50/60 Hz 3%
IEC, EN, CE
Water-cooled: 1 AC 230 V 10%, 50/60 Hz 3%
DIN EN 61800-3 / VDE 0160 T103 (IEC 61800-3)
Line-side rectifier
DIN EN 61800-4 / VDE 0160 T104 (IEC 61800-4)
LCI (Load-Commutated Inverter), DIN EN 61800-5-1 / VDE 0160 T105 (IEC 61800-5-1)
thyristor rectifier in a B6C-circuit, DIN EN 60146-1-1 / VDE 0558 T11 (IEC 60146-1-1)
6-pulse, 12-pulse or 24-pulse, regenerative feedback into the DIN EN 50178 / VDE 0160 (IEC 62103)
line supply DIN EN 60204-11 / VDE 0113 T11 (IEC 60204-11)
Motor-side inverter
LCI (Load-Commutated Inverter),
Standard features
thyristor inverter in a B6C-circuit, Flying restart
6-pulse or 12-pulse Automatic restart
Efficiency Operating hours counter for fans and circuit-breaker
> 99.0% at rated speed and load Maintenance functions
Cooling STARTER software for user-friendly commissioning and
Air cooling with top-mounted cabinet fan diagnostics with a PC
Water cooling using heat exchanger with redundant pumps as Control I/O
standard
Analog inputs: 2/4
Degrees of protection
Analog outputs: 0/4
Air cooling: IP20 (higher degree of protection on request)
Digital inputs: 6/6
Water cooling: IP41 (higher degree of protection on request)
Digital outputs: 4/16. Others through optional expansion modules
Ambient conditions
Speed encoder
Temperature:
+540C (41104F), up to 45C (113F) with power derating Communications: PROFIBUS-DP or PROFINET (other on request)
Installation altitude: Selection of additional options
1,000m above sea level: 100% load capability Increased degree of protection
> 1,000m to 3,000m above sea level: Current derating
Suitable for marine duty
> 2,000m to 3,000 m above sea level: Additional voltage derating
Teleservice module
Humidity: < 85% (condensation not permissible)
Anti-condensation heating
Safety functions (this is only a selection of those available)
Additional I/O modules
Short-circuit and ground fault monitoring
Overcurrent, overvoltage and undervoltage monitoring Output transformer (starting converter)
Line supply voltage failure monitoring Bypass control for up to 4 motors (starting converter)
Overtemperature monitoring (drive converter and motor) Demagnetizing equipment for the output transformer
(starting converter)
Overspeed protection, anti-stall protection (motor)
Redundant configurations (control and/or semiconductor
Cooling circuit monitoring
redundancy)
Self-diagnostics of the control and power unit
Grounding breaker at the input and output
Circuit-breaker at the converter output
Various versions of the heat exchanger

14
 Rated output Output voltage Shaft output No. of No. of Article No.1 Configuration
current pulses, pulses,
A V kW hp line side motor side

GL150 air-cooled innovation 2

1,520 1.4/1.3 2,800 3,750 6 6 6SL3850-2UL1-A0 I

1,625 1.8/1.65 3,900 5,200 6 6 6SL3850-2UL1-A0 I
1,170 2.5/2.3 3,900 5,200 6 6 6SL3850-2UM1-A0 I
1,450 2.5/2.3 4,800 6,400 6 6 6SL3850-2UM1-A0 I
2x 1,340 2x 2.5/2.3 9,000 12,000 12 12 6SL3850-8UM1-A0 J
GL150 air-cooled
1,700 2,600 6,2003 8,3003 6/124 6 6SL3850-3UN1-A0 A
1,500 4,600 9,700 3
13,000 3
6/124 6 6SL3850-3UP2-A0 B
2 x 1,700 2 x 2,600 12,4003 1,6603 12/244 12 6SL3850-5UN2-A0 B
2 x 1,500 2 x 4,600 19,4003 26,0003 12/244 12 6SL3850-5UP3-A0 C
GL150 liquid-cooled
2 x 2,400 2 x 2,400 16,0003 21,5003 12/244 12 6SL3855-5UM4-0 D
2 x 2,350 2 x 4,800 32,0003 42,9003 12/244 12 6SL3855-5UP5-0 E
2 x 2,350 2 x 7,200 48,0003 64,4003 12 12 6SL3855-5US6-0 F
2 x 2,350 2 x 9,600 64,0003 85,8003 12/244 12 6SL3855-5UU7-0 G
2 x 2,350 2 x 11,000 74,0003 99,2003 12 12 6SL3855-5UW7-0 H

1
Please contact your sales partner to complete the configuration
2
Available in new innovative air-cooled configuration
3
Values are referred to the data of a typical synchronous motor
4
Please inquire, modified frame size

Configuration Width Height Depth Weight

mm inch mm inch mm inch kg
Dimensions (air-cooled innovation)
I/I 2,100 82.7 2,676 105.4 1,107 43.6 3,000
J 3,600 141.7 2,676 105.4 1,107 43.6 5,000
Dimensions (power unit)
A 2,400 94.5 2,670 105.2 1,290 50.8 3,300
B 3,600 141.8 2,670 105.2 1,290 50.8 4,600
C 6,000 236.3 2,670 105.2 1,290 50.8 6,700
D 4,000 157.5 2,680 105.6 1,700 67 5,400
E 5,500 216.6 2,680 105.6 1,700 67 7,000
F 7,000 275.6 2,680 105.6 1,700 67 12,000
G 9,000 354.4 2,680 105.6 1,700 67 16,000
H 9,000 354.4 2,680 105.6 1,700 67 18,000
Dimensions (drive control )
1,200 47.3 2,385 93.9 635 25 300

15
Theres
Find outmore to it
more:
siemens.com/sinamics-gl150

Discover the
advantages of the
SINAMICS GL150

Scan the QR code below

and learn about how the
SINAMICS GL150 improves
performance and reliability
for high power and starting
applications.

The advantages
of SINAMICS
GL150 at a
glance

Subject to change without prior notice

Article No.: PDLD-B10032-00-7600
Dispo 21503
GuB/......... WS 11150.5
Printed in Germany
Siemens AG 2015

The information provided in this brochure contains

merely general descriptions or characteristics of
performance which in case of actual use do not
always apply as described or which may change as
a result of further development of the products.
An obligation to provide the respective character-
istics shall only exist if expressly agreed in the
terms of contract.

All product designations may be trademarks

or product names of Siemens AG or supplier com-
panies whose use by third parties for their own
purposes could violate the rights of the owners.

Follow us on: Siemens AG

twitter.com/siemensindustry Process Industries and Drives
Large Drives
youtube.com/siemens
P.O. Box 4743
90025 NUERNBERG
GERMANY