Quick Start Manual

Part Number 3-9000-763 Revision B

December 2011

Daniel MeterLink Software v1.01

for Daniel Gas and Liquid Ultrasonic Flow Meters
Daniel MeterLink Quick Start Manual
3-9000-763 Rev B December 2011

1.1 System requirements

Table 1-1 Software and hardware requirements

Software
Windows XP Service Pack 2 or later installed, Windows Vista, or Windows 7 (Daniel MeterLink supports 32-bit and 64-bit
versions of Windows 7)
Microsoft Excel 2000 or later version (log file(s) are CSV format if Excel 2000 or later is not available)
Microsoft XML parser v2.6 or above
Daniel CUI should not be run simultaneously with Daniel MeterLink

Hardware
PC with a 133MHz Pentium or higher processor (300MHz recommended)
One serial port available for remote/local connection (for on-line operations)
One Ethernet port available for remote/local connection (for on-line operations)
One parallel port for connection to a local printer, or a connection to a network printer (optional)
100MB of free hard disk space
Super VGA monitor (at least 1024x768 resolution)
Windows-compatible printer (optional), modem (remote connection only) and mouse (i.e. Mouse, Trackball or Touchpad)

1.2 Daniel MeterLink installation

Insert the CD in the appropriate drive and follow the instructions in the table below for your
operating system. Make sure you have administrative rights before proceeding. If you are not
sure, continue and the installation program will inform you if you dont and abort the
installation. Consult your system administrator for assistance.

The Daniel MeterLink installation program is also available for download from the Daniel
Measurement and Control, Inc. website:

http://www.daniel.com/um2/Productdetail.htm

1
 Daniel MeterLink Quick Start Manual
December 2011 3-9000-763 Rev A

Table 1-2 Daniel MeterLink installation instructions

Windows XP Start > Run > Browse. Locate directory for Setup.exe> Click OK.
Browse to locate the directory for Setup.exe> Click OK.
Windows opens the setup file. Click Next.
Click the radio button to accept the License Agreement terms.
Click Next and select Complete Setup type.
Click Next and follow the instructions on the screen to complete the installation.
Windows Vista Start > Computer. Locate CD drive containing the disk.
Double-click Setup.exe to begin the installation.
You will receive a message An unidentified program wants access to your computer, select Allow - I
trust this program. I know where it's from or I've used it before.
Windows opens the setup file. Follow the instruction on the screen.
Click the radio button to accept the License Agreement terms.
Click Next and select Complete Setup type.
Click Next and follow the instructions on the screen to complete the installation.
Windows 7 Start>All Programs>Accessories>Run.
Browse to locate the directory for Setup.exe> Click OK.
Windows opens the setup file. Click Next.
Click the radio button to accept the License Agreement terms.
Click Next and select Setup type (Complete setup is recommended).
Click Next and follow the instructions on the screen to complete the installation.

1.3 Direct connection driver installation

If an Ethernet connection for Daniel MeterLink communications is unavailable, perform the
following steps to install the standard communications cable between two computers driver or
the Daniel Direct Connection driver in order for Daniel MeterLink to communicate with a Daniel
Ultrasonic meter using a serial port. This process varies slightly for the different operating
systems. Follow the set of instructions for your operating system.
Table 1-3 Direct connection driver for Daniel MeterLink communication
Windows XP Start>Control Panel > Printers and Other Hardware.
Double-click the Phone and Modem Options icon. If prompted, enter the required data in the
Location Information dialog (country/region, area code, carrier code, number to dial for an outside line,
and tone dialing).
Select Modems > ADD (Delete existing drivers for the COM port you want to use.
Select the check box Don't detect my modem; I will select it from a list > click Next
Select Standard Modem Types (in Manufacturer field).
Select Communications cable between two computers (in Models field)> Next.
Choose Selected ports (only select the port you want to use to communicate with
Daniel MeterLink.)
Click Finish to close the wizard.
The Communications cable between two computers driver now displays in the Modem list.
Click OK to close the dialog. This completes the driver installation.

2
Daniel MeterLink Quick Start Manual
3-9000-763 Rev B December 2011

Table 1-3 Direct connection driver for Daniel MeterLink communication

Windows Vista Start > Control Panel.

Double-click Phone and Modems Options icon. If prompted, enter the required data in the Location
Information dialog (country/region, area code, carrier code, number to dial for an outside line, and
tone dialing).
Select Modems>Add (Delete existing drivers for the COM port you want to use.) A message may
appear Windows needs your permission to continue. Select Continue to proceed.
Select the check box "Don't detect my modem; I will select it from a list" > Click Next.
Click Have Disk.
Under "Copy manufacturer's files from:" enter default installation directory,
e.g., C:\Program Files\Daniel\Daniel MeterLink.
Click Browse, if necessary, to search for the Daniel MeterLink installation directory > Click OK.
From the Models field, select Daniel Direct Connection > click Next.
Click Selected ports (only select the port you want to use to communicate with Daniel MeterLink.) >
Click Next.
Click Finish to close the wizard.
The Communications cable between two computers driver now displays in the Modem list. Multiple
instances of the driver will appear, if it was installed for multiple COM ports.
Click OK to close the dialog. This completes the driver installation.

Windows 7 Start > Control Panel.

Double-click Phone and Modems Options icon. If prompted, enter the required data in the Location
Information dialog (country/region, area code, carrier code, number to dial for an outside line, and
tone dialing).
Select Modems > Add.
Select the check box "Don't detect my modem; I will select it from a list" > Click Next.
Select Have Disk.
Under "Copy manufacturer's files from:" enter default installation directory,
e.g., C:\Program Files\Daniel\Daniel MeterLink.
Click Browse, if necessary, to search for the Daniel MeterLink installation directory > Click OK.
From the Models field, select Daniel Direct Connection.inf > click Open. Under Models, select Daniel
Direct Connection > Click Next
Click Selected ports (only select the port you want to use to communicate with Daniel MeterLink) >
Click Next.
Click Finish to close the wizard. This completes the driver installation.

1.4 Configure the meter directory

If your meter has not previously been configured, Daniel MeterLink will create a meter directory
record named "New Meter" with default settings.

Open the Meter Directory using the File>Meter Directory menu or use the
Meter Directory icon on the Daniel MeterLink toolbar.

Create a new record by selecting Insert, Insert Duplicate, or Add from the File pull-down menu.
Enter a Meter Name, Short Description, Meter Type, and the connection type(s) checkboxes
(Direct, Modem, Ethernet). Edit the connection properties for each connection method
selected by clicking the button enabled at the bottom of the dialog.

Daniel MeterLink provides detailed Online Help and context-sensitive help on any page or Menu
bar item activated by pressing F1.

3
 Software License Agreement
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE INSTALLING AND USING THE SOFTWARE. IF YOU DO
NOT AGREE WITH THE TERMS OF THE AGREEMENT, YOU ARE NOT PERMITTED TO USE THE SOFTWARE AND MUST RETURN THE SOFTWARE AND
INSTALLATION GUIDE TO THE PLACE WHERE YOU OBTAINED IT, IF APPLICABLE. Daniel Measurement and Control, Inc. ("DANIEL") provides this
software ("Program") and installation guide (collectively, "Daniel MeterLink(TM) product") for your use. You assume responsibility for the
acquisition of a machine(s) and associated equipment compatible with the Program, and for installation, use, and results obtained from the
Program.

DANIEL grants to you a non-transferable, non-exclusive license to: (a) install and use the Program provided to you to run on any number of your
machines and (b) copy the Program for backup purposes. You must reproduce and include the copyright notice or any other proprietary notice
on any copy of the Program. YOU MAY NOT REVERSE ENGINEER, USE, COPY OR MODIFY ANY PROGRAM OR RELATED MATERIALS OR ANY COPY
OR MODIFICATION, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED FOR IN THIS LICENSE. IF YOU TRANSFER POSSESSION OF THE
DANIEL METERLINK(TM) PRODUCT OR ANY COPY OF THE DANIEL METERLINK(TM) PRODUCT TO ANOTHER PARTY, WITHOUT DANIEL'S PRIOR
WRITTEN CONSENT, YOUR LICENSE IS AUTOMATICALLY TERMINATED. No license, express or implied, is granted under any intellectual property
directly or indirectly owned by DANIEL which does not specifically read on the Daniel MeterLink(TM) product as provided hereunder, nor shall
any license, except the license specifically granted herein, be implied in law, implied in equity, or exist under the doctrine of patent exhaustion.

The Daniel MeterLink(TM) product accompanying this Agreement whether on disk, downloaded or on any other media or in any other form are
licensed, not sold, to you by DANIEL for use only under the terms of this Agreement, and DANIEL reserves all rights not expressly granted to you.
The terms of this Agreement will govern any software upgrades provided by DANIEL that replace and/or supplement the original Daniel
MeterLink(TM) product, unless such upgrade is accompanied by a separate license in which case the terms of that license will govern.

1. TITLE AND COPYRIGHT: Title to and ownership of the Daniel MeterLink(TM) product shall at all times remain with DANIEL or its licensors
and is protected by United States copyright laws and international treaty provisions. Your right to use the same is at all times subject to the
terms and condition of this Agreement. DANIEL may, from time to time, revise or update the program and/or installation guide and, in so
doing, incurs no obligation to furnish such revisions or updates to you.

2. TERM: You may terminate this license at any time by destroying the media on which the Program was furnished and the installation guide
together with all copies in any form. In addition, the Program installed on the machine(s) must be uninstalled or rendered unusable. This
license will also terminate upon conditions set forth elsewhere in this Agreement or if you fail to comply with any term or condition of this
Agreement. You agree upon such termination to destroy the media on which the Program was furnished and the installation guide
together with all copies in any form and to uninstall or render unusable the Program installed on the machine(s).

3. LIMITED WARRANTY: DANIEL warrants the media on which the Program is furnished to be free from defects in materials and workmanship
under normal use for a period of ninety (90) days from the date of delivery to you as evidenced by a copy of your invoice. However, DANIEL
does not warrant that the functions contained in the Program will meet your requirements or that the operation of the Program will be
uninterrupted or error free. THE DANIEL METERLINK(TM) PRODUCT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NON-INFRINGEMENT. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION. The above
Limited Warranty is void if the failure of the Program has resulted from accident, abuse or misapplication.

4. LIMITATIONS OF REMEDIES: DANIEL's entire liability and your exclusive remedy shall be the replacement of any media not meeting
DANIEL's "Limited Warranty". IN NO EVENT SHALL DANIEL BE LIABLE TO YOU FOR ANY DAMAGES ARISING OUT OF ANY CAUSE WHAT SO
EVER (WHETHER SUCH CAUSES ARE BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT, PATENT INFRINGEMENT OR
OTHERWISE), INCLUDING ANY LOST PROFITS, LOST SAVINGS OR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE SUCH PROGRAM EVEN IF DANIEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY
ANY OTHER PARTY.

5. GOVERNING LAW: This Agreement, and all matters concerning its construction, interpretation, performance or validity, shall be governed
by the laws of the State of Texas, excluding its conflict laws.

6. EXPORT RESTRICTIONS: You shall comply fully with all laws, regulations, decrees and orders of the United States of America that restrict or
prohibit the exportation (or reexportation) of technical data and/or the direct product of it to other countries, including, without
limitation, the U.S. Export Administration Regulations.

7. U.S. GOVERNMENT RIGHTS: The Daniel MeterLink(TM) product is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by
the U.S. Government is subject to restrictions set forth in the Federal Acquisition Regulations and its Supplements.

8. GENERAL: You may not sublicense, assign, or transfer the license or the Program and installation guide without the prior written consent of
DANIEL. Any attempt otherwise to sublicense, assign or transfer any of the rights, duties, or obligations hereunder without such consent is
void. THE PROGRAM IS NOT FOR USE IN ANY NUCLEAR AND RELATED APPLICATIONS. You accept the program with the foregoing
understanding and agree to indemnify and hold harmless DANIEL from any claims, losses, suits, judgments and damages, including
incidental and consequential damages, arising from such use, whether the cause of action be based in tort, contract or otherwise,
including allegations that DANIEL's liability is based on negligence or strict liability. To the extent that a third party owns and has licensed to
DANIEL any portion of the program, such third party owner shall be a beneficiary of this Agreement, and shall have the right to enforce its
rights under this Agreement independently of DANIEL. Should you have any question concerning this Agreement, please contact your
DANIEL representative or sales office. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE
BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE
AGREEMENT BETWEEN US WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER
COMMUNICATIONS BETWEEN US RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. YOU AGREE THAT DANIEL MAY AUDIT YOUR
FACILITY TO CONFIRM COMPLIANCE WITH THE FOREGOING PROVISIONS.
 Daniel Gas and Liquid Ultrasonic Flow Meters power PlantWeb by
communicating health and process variable information via the
HART protocol and are core components of the PlantWeb
digital plant architecture.
Emerson Process Management Copyright 2011
Daniel Measurement and Control, Inc. Daniel Measurement and Control, Inc. and Daniel Measurement Services, Inc. Divisions of Emerson
11100 Brittmoore Park Drive Process Management reserve the right to make changes to any of its products or services at any
Houston, TX 77041 time without prior notification in order to improve that product or service and to supply the best
T+1 713-467-6000 product or service possible.
F+1 713-827-4805
www.emerson.com Daniel Measurement Services, Inc. offers both on-call and contract maintenance service designed
to provide single-source responsibility for all Daniel products. The sales and service offices of Daniel
Measurement and Control, Inc. are located throughout the United States and in major countries
overseas. For the location of the sales or service office nearest you, telephone the number below or
visit the Daniel Measurement and Control, Inc. website.

T+1713-827-6314
F+1713-827-4805
www.emerson.com