Lecture-5 Supervisory Control and Data Acquisition (SCADA)

Lecture-5
Supervisory Control and Data Acquisition (SCADA)

Introduction:
SCADA is a monitoring and/or control system that consists of a central
computer for storing information and on-site/remote hardware to monitor
facilities and processes.
These systems are used to monitor and control plant or equipment in

industries such as energy, oil and gas refinery, water and waste control,
traffic control.
These systems encompass the transfer of data between SCADA central

host computer and a number of Remote terminal units (RTUs), and/or
Programmable Logic Controllers (PLCs), and central host and operator
terminals.
These systems consists of
One or more field data interface device such as RTUs or PLCs
Communication systems such as radio, telephone, cable, satellite

etc.
Central host computer server or servers (also called SCADA

centre, master station, or Master Terminal Unit (MTU).
Standard and/or custom software systems such as Human

Machine Interface software or Man Machine Interface software.
Applications
Electric power generation, transmission and distribution: Electric utilities
detect current flow and line voltage, to monitor the operation of circuit breakers,
and to take sections of the power grid online or offline.
Buildings, facilities and environments: Facility managers use SCADA to

control HVAC, refrigeration units, lighting and entry systems.
Manufacturing: manage parts inventories for just-in-time manufacturing,

regulate industrial automation and robots, and monitor process and quality
control.
Mass transit: regulate electricity to subways, trams and trolley buses; to

automate traffic signals for rail systems; to track and locate trains and buses;
and to control railroad crossing gates.
Water and sewage: State and municipal water utilities use S SCADA
CADA to monitor
and regulate water flow, reservoir levels, pipe pressure and other factors.
Traffic signals: regulates traffic lights, controls traffic flow and detects out
out-of-
order signals.
A SCADA system performs four functions:
1. Data acquisition
2. Networked data communication
3. Data presentation
4. Control
These functions are performed by four kinds of SCADA components:
a) Sensors (either digital or analogue) and control relays that directly

interface with the managed system.
b) Remote telemetry units (RTUs). These are small computerized units

deployed in the field at specific sites and locations. RTUs serve as local
collection points for gathering reports from sensors and delivering
commands to control relays.
c) SCADA master units. These are larger computer consoles that serve as
the central processor for the SCADA system. Master units provide a
human interface to the system and automatically regulate the managed
system in response to sensor inputs.
d) The communications network that connects the SCADA master unit to

the RTUs in the field.
1. Data Acquisition
SCADA system needs to monitor hundreds or thousands of sensors.
These sensors measure:
Inputs and outputs e.g. Voltage and current at substation incoming.

Voltage and current at substation outgoing.
Discrete inputs (or digital input) e.g. whether equipment is on or

off, or tripwire alarms, like a power failure at a critical facility.
Analogue inputs: where exact measurement is important e.g. to

detect continuous changes in a voltage or current input, to track
fluid levels in tanks, voltage levels in batteries, temperature and
other factors that can be measured in a continuous range of input.
o For most analogue factors, there is a normal range defined

by a bottom and top level e.g. temperature in a server room
between 15 and 25 degrees Centigrade. If the temperature
goes outside this range, it will trigger a threshold alarm.
o In more advanced systems, there are four threshold alarms

for analogue sensors, defining Major Under, Minor Under,
Minor Over and Major Over alarms.
2. Data Communication
A communications network is required to monitor multiple systems from a
central location. Communication methods may be directly wired, power line
carrier, microwave, radio wave or fibre optics.
TREND: put SCADA data on Ethernet and IP over SONET (SONET is

the American National Standards Institute standard for synchronous data
transmission on optical media. The international equivalent of SONET is
synchronous digital hierarchy (SDH)).
SECURITY: Keep data on closed LAN/WANs without exposing

sensitive data to the open Internet.
Encode data in protocol format (use open, standard protocols and

protocol mediation)
Sensors and control relays cant generate or interpret protocol

communication - a remote telemetry unit (RTU) is needed to provide an
interface between the sensors and the SCADA network.
RTU encodes sensor inputs into protocol format and forwards them to
the SCADA master;
RTU receives control commands in protocol format from the master and
transmits electrical signals to the appropriate control relays.
3. Data Presentation:
SCADA systems report to human operators over a master station using HMI
(Human-Machine Interface software) or HCI (Human-Computer Interface
software).
SCADA master station has several different functions:
continuously monitors all sensors and alerts the operator when there is an
alarm
presents a comprehensive view of the entire managed system,
presents more detail in response to user requests
performs data processing on information gathered from sensors
maintains report logs and summarizes historical trends.
Selection of RTUs
RTUs need to communicate with all on-site equipment.
It Should:
survive an industrial environment. Rugged construction and ability to

withstand extremes of temperature and humidity (it needs to be the
most reliable element in your facility).
have sufficient capacity to support the equipment at a site (though

should support expected growth over a reasonable period of time).
have a secure, redundant power supply for 24/7 working, support

battery power and, ideally, two power inputs.
have redundant communication ports e.g. secondary serial port or

internal modem to keep the RTU online even if the LAN fails (multiple
communication ports easily support a LAN migration strategy)
have non-volatile memory (NVRAM) for storing software and/or

firmware. New firmware downloadable over LAN to keep RTU
capabilities up to date without excessive site visits
control local systems by themselves (Intelligent control) according to

programmed responses to sensor inputs
have a real-time clock to accurately date/time stamp reports
have a watchdog timer to ensure that the RTU restarts after a power
failure.
Selection of SCADA Master
A SCADA master should display information in the most useful ways to human
operators and intelligently regulate managed systems.
It should:
have flexible, programmable soft controls to respond to sensor inputs
allow programming for soft alarms (reports of complex events that track
combinations of sensor inputs and date/time statements).
automatically page or email directly to repair technicians and provide

detailed information display in plain English, with a complete description
of what activity is happening and how to manage it.
have tools to filter out nuisance alarms (to prevents operators from
loosing confidence and stop responding even to critical alarms)
support multiple backup masters, in separate locations (primary SCADA

master fails, a second master on the network automatically takes over,
with no interruption of monitoring and control functions)
support multiple open protocols to safeguard the SCADA system against

unplanned obsolescence.
A few typical reasons for implementing a SCADA system are:
Improved operation of the plant or process resulting in savings due

to optimization of the system
Increased productivity of the personnel
Improved safety of the system due to better information and

improved control
Improved energy savings due to optimization of the plant
Improved and quicker receipt of data so that clients can be invoiced

more quickly and accurately
********

Lecture-5 Supervisory Control and Data Acquisition (SCADA)

Uploaded by

Copyright:

Available Formats

Lecture-5 Supervisory Control and Data Acquisition (SCADA)

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Lecture-5 Supervisory Control and Data Acquisition (SCADA)

Uploaded by

Copyright:

Available Formats

Lecture-5

Supervisory Control and Data Acquisition (SCADA)

These systems are used to monitor and control plant or equipment in

These systems encompass the transfer of data between SCADA central

These systems consists of

One or more field data interface device such as RTUs or PLCs

Communication systems such as radio, telephone, cable, satellite

Central host computer server or servers (also called SCADA

Standard and/or custom software systems such as Human

Buildings, facilities and environments: Facility managers use SCADA to

Manufacturing: manage parts inventories for just-in-time manufacturing,

Mass transit: regulate electricity to subways, trams and trolley buses; to

2. Networked data communication

These functions are performed by four kinds of SCADA components:

a) Sensors (either digital or analogue) and control relays that directly

b) Remote telemetry units (RTUs). These are small computerized units

d) The communications network that connects the SCADA master unit to

These sensors measure:

Inputs and outputs e.g. Voltage and current at substation incoming.

Discrete inputs (or digital input) e.g. whether equipment is on or

Analogue inputs: where exact measurement is important e.g. to

o For most analogue factors, there is a normal range defined

o In more advanced systems, there are four threshold alarms

TREND: put SCADA data on Ethernet and IP over SONET (SONET is

SECURITY: Keep data on closed LAN/WANs without exposing

Encode data in protocol format (use open, standard protocols and

Sensors and control relays cant generate or interpret protocol

presents a comprehensive view of the entire managed system,

presents more detail in response to user requests

performs data processing on information gathered from sensors

maintains report logs and summarizes historical trends.

RTUs need to communicate with all on-site equipment.

survive an industrial environment. Rugged construction and ability to

have sufficient capacity to support the equipment at a site (though

have a secure, redundant power supply for 24/7 working, support

have redundant communication ports e.g. secondary serial port or

have non-volatile memory (NVRAM) for storing software and/or

control local systems by themselves (Intelligent control) according to

have a real-time clock to accurately date/time stamp reports

have flexible, programmable soft controls to respond to sensor inputs

automatically page or email directly to repair technicians and provide

support multiple backup masters, in separate locations (primary SCADA

support multiple open protocols to safeguard the SCADA system against

A few typical reasons for implementing a SCADA system are:

Improved operation of the plant or process resulting in savings due

Increased productivity of the personnel

Improved safety of the system due to better information and

Improved energy savings due to optimization of the plant

Improved and quicker receipt of data so that clients can be invoiced

You might also like