STI_Depliant_accessori@1-40#.indd 2 04/02/14 17.

16
 Made in Italy
accessories I index

2030 I Electronic
position transmitter 2130 I Limit switch AL I Air-lock 101 device
page 4 page 6 page 8

TP I Pneumatic CO I 3-Way pneumatic

pressure switch operating valve CS I Quick exhaust
page 10 page 12 page 18

SL I Exhaust
protection system GR I Manual override MC I Motion converter
page 20 page 22 page 24

SAR I Snap acting relay UD I Derivative unit BD I Derivative booster

page 26 page 28 page 30

BW I Ultra high
BV I Big volume booster capacity booster AV I Volume booster
page 32 page 34 page 36

AC sseries - 3

STI_Depliant_accessori@1-40#.indd 3 04/02/14 17.16

 2030 I Electronic position
transmitter

Product description
T Electronic Position Transmitter (model 2030) is suitable
The
for installation on quarter turn and linear actuators. It has been
designed to meet various industrial application requirements,
for example on board pneumatic actuators.
The enclosure has the capability to house a wide range of
T
either mechanical or inductive limit switches (up to 4).
A shaft with a manually-adjustable cam is used for accurate
and easy setting of the limit switches which are prewired
to a terminal strip.

Advantages
A
Contactless sensor
Easy configurable for 30-90 angles
Direct or reverse action
Explosion proof version
Position transmitter / Position Transmitter + Limit
switch version available
Available with integrated limit switches (see page 6)

Key features
Suitable for
Standard, Offshore, Sandstorm, copper free ambient condition
Single and double acting actuators
Low and high ambient temperature
Quarter turn and linear actuators
Design to be coupled with STI motion converter device
(see page 24)

Electrical certifications
Protection degree: IP66
Hazardous area certification: ATEX EExd II 2 G EEx d IIC T6
CE and EMC certifications

4 - AC series

STI_Depliant_accessori@1-40#.indd 4 04/02/14 17.16

 Technical specifications
p

Housing materials
Painted RAL 9005 aluminum Output
Stainless steel 316 (without limit 4-20 mA (passive loop)
switches)

Operating temperature Operative angle

- 40C / + 85C 30 - 90

Position transmitter with limit switches

(ALUMINUM) - See page 6 Accuracy (*) Action
< 0,5% (including linearity, Direct or reverse locally
repeatibility and hysteresis) configurable by a simple switch

Supply range
Loop supply effect (*)
12 to 32 Vdc, reverse polarity
< 0,2% on the full supply range
protected

Position transmitter Temperature drift (*) Zero and span adjustment

without limit switches (ALUMINUM) Locally adjustable with a screw driver
< 0,3% every 10C

Weight
Response time TR Aluminum = 1,6 kg
< 0,2 s TR + LS Aluminum = 2,2 kg
TR Stainless steel 316 = 5 kg
(*) Referred to 90 operating angle.
Position transmitter without limit switches
(STAINLESS STEEL 316)

Dimensional drawing

AC series - 5

STI_Depliant_accessori@1-40#.indd 5 04/02/14 17.16

 2130 I Limit switch

Product description
The Limit Switch (model 2130) is suitable for installation on
rotary motion. It has been designed to meet various industrial
application requirements, for example on board pneumatic
actuators. The enclosure has the capability to house a wide
range of either mechanical or inductive limit switches.
A shaft with manually-adjustable cam is used for accurate
and easy setting of the limit switches, which are prewired to a
terminal strip.

Advantages
Up to 4 limit switches
Mechanical or Inductive limit switch
Gold plated limit switch option available
Easy adjustable independent cam for switch position
adjustment
Easy access, robust terminal board suitable for
2,5mm^2 wires

Key features
Suitable for
Standard, Offshore, Sandstorm, copper free ambient condition
Quarter turn and linear actuators
Low and high ambient temperature

Electrical certifications
Protection degree: IP66
Hazardous area certification: ATEX EExd II 2 G EEx d IIC T6
CE and EMC certifications

6 - AC series

STI_Depliant_accessori@1-40#.indd 6 04/02/14 17.16

 Technical specifications

Housing materials
Painted RAL 9005 aluminum

Operating temperature
- 40C / + 85C

Weight
2,2 kg
Limit switches box
(ALUMINUM)

Dimensional drawing

AC series - 7

STI_Depliant_accessori@1-40#.indd 7 04/02/14 17.16

 AL I Air-lock 101 device

Product description
The Air-Lock pressure static device (model AL) is composed of
a TP Pneumatic pressure switch (see page 10) combined with
2 x 3 way valves ND 1/4 in a single body (see page 12).
The Air-Lock pressure static device is mounted on pneumatic
actuators when they need to be isolated from control devices
(positioners, electro-pneumatic distributors, etc.) in the event
air pressure falls below the pre-determined operating safety
point. The Air-Lock device consists mainly of a pneumatic
pressure switch with an adjustable set point. This device
synchronously drives the 2 x 3 way valves. The switching
device operates immediately, even in the case of a gradual
air-pressure decrease to the set value. The device will
automatically reset after a failure, when the line pressure is 1
bar greater than set pressure to avoid instability around the
device set point.

Advantages
Accurate pressure setting
Set screw lockable with nut
Insensitive to vibrations
Reset hysteresis with established safety
Synchronous drive for set pressure group + 2 x 3 way
valve in one body
Small dimension and light weight

Key features
Suitable for
Standard, Offshore, Sandstorm, copper free ambient
condition
Single and double acting actuators
Low and high ambient temperature

Exclusive STI design for double 3 way valve in one body, to

reduce assembly time, space and cost.

8 - AC series

STI_Depliant_accessori@1-40#.indd 8 04/02/14 17.16

 Technical specifications

Materials CV max
Anodized aluminum Inlet = 1
Stainless steel 316 Outlet = 1

Operating temperature* Operating pressure

-20C / +70C Design = 10 bar
-40C / +70C available on request Operating = 7 bar
-20C / +85C available on request Minimum operating = 2 bar

Feeding connections Output connections

1/4 NPT 1/4 NPT
ALUMINUM STAINLESS
STEEL 316
Weight
Pilot signal connection Aluminum = 1 kg
1/8 NPT Stainless steel 316 = 2,5 kg

(*) Lower or higher temperature available on request.

Dimensional drawing

AC series - 9

STI_Depliant_accessori@1-40#.indd 9 04/02/14 17.16

 TP I Pneumatic
pressure switch

Product description
The Pneumatic Pressure Switch (model TP) device has
been designed to drive lock-up devices to the safety shut
down position in the event supply air pressure falls below
the operating safety value. The switching value is easily
adjustable and the device allows maintainers to set switching
pressure required switch in the safety/shut down function. The
switching device operates immediately, even in the case of a
gradual air-pressure decrease to the set value. The device will
automatically reset after a failure, when the line pressure is 1
bar greater than set pressure to avoid instability around the
device set point.

Advantages
Accurate pressure setting
Set screw lockable with nut
Insensitive to vibrations
Small dimensions and light weight allows mounting
on lock-up 3 way valve
Reset hysteresis with established safety

Key features
Suitable for
Standard, Offshore, Sandstorm, copper free ambient condition
Single and double acting actuators
Low and high ambient temperature

10 - AC series

STI_Depliant_accessori@1-40#.indd 10 04/02/14 17.16

 Technical specifications

Operating pressure
Housing materials
P min = 2 bar
Anodized aluminum
P max = 7 bar
Stainless steel 316
Design pressure = 10 bar

Operating temperature* Output connections

-20C / +70C Fig. 1 Fig. 2
-40C / +70C available on request 1/8 NPT 1/8 NPT
-20C / +85C available on request 1/4 NPT

Weight
Pilot signal connection
Aluminum = 0,4 kg
1/8 NPT
Stainless steel 316 = 0,8 kg
ALUMINUM STAINLESS
with square plate STEEL 316 (*) Lower or higher temperature available on request.
with threaded
connection

Dimensional drawings
fig. 1

fig. 2

AC series - 11

STI_Depliant_accessori@1-40#.indd 11 04/02/14 17.16

 CO I 3-Way pneumatic
operating valve

Product description
The 3-Way Pneumatic Operating Valve (model CO) are pilot
operated, and designed for high flow applications. The 3-way
valve is available in sizes , , 1, 1 and 2. The STI 3-way
valve can be used in one or more synchronous units piloted by
a pneumatic pressure switch or solenoid valve or both in order
to achieve safety, trip or shut down function.

Advantages
Size 1/4
2x3 way valves in one body, reduced dimensions.
Sizes 1 1/2 - 2
Large size 3 way valve with a special device to switch quickly
when in the de-energized position, even when controlled by
a low CV pilot.
Sizes 1 1/2 - 2
Pilot quick exhaust valve included.
Sizes 1/2 - 1 - 1 1/2 - 2
Perfect tight shut off regardless of the flow direction up to 7
bar with pilot pressure over 2 bar when energized.
Sizes 1/2 - 1 - 1 1/2 - 2
SIL 3 certified.

Key features
Suitable for
Standard, Offshore, Sandstorm, copper free ambient
condition
Single and double acting actuators
Low and high ambient temperature

Exclusive manifold mounting system. It is a special STI

application to connect our accessories. Fittings or nipples are
not necessary as the connection is achieved using machined
connection faces with sealing oring. This system saves time
for assembly, reduces cost on items such as fittings, reducing
inventory and the shortened dimensions save space.

12 - AC series

STI_Depliant_accessori@1-40#.indd 12 04/02/14 17.16

 Technical specifications - Model 1/4

Materials CV Max
Anodized aluminum Inlet = 1
Stainless steel 316 Outlet = 1

Operating temperature*
Port size
-20C / +70C
Pilot signal = 1/8 NPT
-40C / +70C available on request
Others = 1/4 NPT
-20C / +85C available on request

CO 1/4 CO 1/4 Operating pressure

Weight
ALUMINUM STAINLESS STEEL 316 P min = 2,5 bar
CO 1/4 Aluminum = 0,5 kg
P max = 7 bar
CO 1/4 Stainless steel 316 = 1,7 kg
Design pressure = 10 bar

(*) Lower or higher temperature available on request.

Dimensional drawing

AC series - 13

STI_Depliant_accessori@1-40#.indd 13 04/02/14 17.16

 Technical specifications - Model 1/2

Materials CV Max
Anodized aluminum Inlet = 2,5
CO 1/2 ALUMINUM Stainless steel 316 Outlet = 2,5
Manifold mounting
Operating temperature*
Port size
-20C / +70C
Pilot signal = 1/8 NPT
-40C / +70C available on request
Others = 1/2 NPT
-20C / +85C available on request

Operating pressure
Weight
P min = 2,5 bar
CO 1/2 STAINLEES CO 1/2 Aluminum = 1 kg
P max = 7 bar
STEEL 316 CO 1/2 Stainless steel 316 = 1,5 kg
Manifold mounting Design pressure = 10 bar

(*) Lower or higher temperature available on request.

Dimensional drawing

14 - AC series

STI_Depliant_accessori@1-40#.indd 14 04/02/14 17.16

 Technical specifications - Model 1

Materials CV Max
Anodized aluminum Inlet = 6,5
CO 1 ALUMINUM Stainless steel 316 Outlet = 6,5
Manifold mounting
Operating temperature*
Port size
-20C / +70C
Pilot signal = 1/4 NPT
-40C / +70C available on request
Others = 1 NPT or manifold mounting
-20C / +85C available on request

Operating pressure
Weight
P min = 2,5 bar
CO 1 STAINLEES CO 1 Aluminum = 2,2 kg
P max = 7 bar
STEEL 316 CO 1 Stainless steel 316 = 5,1 kg
Manifold mounting Design pressure = 10 bar

(*) Lower or higher temperature available on request.

Dimensional drawing

AC series - 15

STI_Depliant_accessori@1-40#.indd 15 04/02/14 17.17

 Technical specifications - Model 1 1/2

Materials CV Max
Painted RAL 7001 aluminum Inlet = 10,5
Stainless steel 316 Outlet = 13

Operating temperature*
Port size
-20C / +70C
Pilot signal = 1/4 NPT
-40C / +70C available on request
Others = 1 1/2 NPT or manifold mounting
-20C / +85C available on request

Operating pressure
Weight
P min = 2,5 bar
CO 1 1/2 CO 1 1/2 STAINLESS CO 1 1/2 Aluminum = 4,5 kg
P max = 7 bar
ALUMINUM STEEL 316 CO 1 1/2 Stainless steel 316 = 10 kg
Manifold mounting Manifold mounting Design pressure = 10 bar

(*) Lower or higher temperature available on request.

Dimensional drawing

16 - AC series

STI_Depliant_accessori@1-40#.indd 16 04/02/14 17.17

 Technical specifications - Model 2

CV Max
Materials
Inlet = 45
Painted RAL 7001 aluminum
Outlet = 45

Operating temperature*
Port size
-20C / +70C
Pilot signal = 1/4 NPT
-40C / +70C available on request
Others = 2 NPT or manifold mounting
-20C / +85C available on request

Operating pressure
P min = 2,5 bar Weight
CO 2 ALUMINUM P max = 7 bar CO 2 Aluminum = 4,1 kg
Manifold mounting Design pressure = 10 bar

(*) Lower or higher temperature available on request.

Dimensional drawing

AC series - 17

STI_Depliant_accessori@1-40#.indd 17 04/02/14 17.17

 CS I Quick exhaust

Product description
The Quick Exhaust (model CS) is a 2 way valve used for on/off
movement (trip or fail) to fully exhaust the connected chamber
of the actuator. When mounted on a modulating actuator, this
device when pilot operated permits quick exhausting of the
connected chamber even when piloted by a small CV device.

Advantages
Compact design
Big exhaust CV (up to 60)
Metal piston operated (diaphragm free)
Flange mounted on actuator cap
Suitable for internal actuator damper
Suitable for SL exhaust protection system
(from 1 to 3 max SL) depending on exhaust flow request

Key features
Suitable for
Standard, Offshore, Sandstorm, copper free ambient condition
Single and double acting actuators
Low and high ambient temperature

18 - AC series

STI_Depliant_accessori@1-40#.indd 18 04/02/14 17.17

 Technical specifications

Housing materials
CV max
Anodized aluminum
Exhaust = 60
Stainless steel 316

Operating temperature* Operating pressure

-20C / +70C P min = 2,5 bar
ALUMINUM -40C / +70C available on request P max = 7 bar
Manifold mounting -20C / +85C available on request Design pressure = 10 bar

Actuator connections Exhaust connections

Dedicated flange Dedicated to SL

Weight
Pilot signal connection
STAINLESS Aluminum = 9,3 kg
1/4 NPT
STEEL 316 Stainles steel 316 = 22 kg
Manifold mounting
(*) Lower or higher temperature available on request.

Dimensional drawing

AC series - 19

STI_Depliant_accessori@1-40#.indd 19 04/02/14 17.17

 SL I Exhaust protection
system

Product description
The Exhaust Protection System (model SL) has excellent
exhaust and silencing characteristics with minimal resistance to
air flow. In addition, it has an integral check valve that enables
the maximum IP protection. This product is made with special
polymeric material which is compliant with ATEX directives
for use in an explosive atmosphere. The exhaust protection
system design incorporated a very low back-pressure,
ensuring a very high exhaust flow.

Advantages
High exhaust flow
Exhaust flow dissipation of energy though a cage
labyrinth system which is self cleaning minimize
clogging
Includes an integral check valve that maintains a
very low back-pressure to permit quick opening
allowing high dynamic movement (the check valve will
immeditely close at the end of exhaust flow)
Internal check valve also serves to protect devices
where the SL system is installed, from dust or any
other material when there isnt exhaust flow
The special design of the labyrinth allows installation
in any orientation, minimizing the ingress or storage
of water into the SL system
Made of stainless steel and plastic material suitable
for use in hazardous areas (ATEX)

Key features
Suitable for
Standard, Offshore, Sandstorm, copper free ambient condition
Single and double acting actuators
Low and high ambient temperature

20 - AC series

STI_Depliant_accessori@1-40#.indd 20 04/02/14 17.17

 AV I Volume booster

Product description
P
Th Volume Booster (model AV), available sizes 14 and 34,
The
is designed to meet high speed control valve applications.
It produces
p a high volume boosting action and contains an
integral stabilizing by-pass valve controlled by a screwdriver
int
adjustment in the body. By opening this valve it is possible
ad
improve the stability of the pneumatic circuit made up of a
im
positioner, volume booster(s) and actuator.
po

Advantages
A
Safety - more sensibility - more accuracy
Regulation screw is not ejectable by internal air pressure.
Regulation screw is accurate and lockable.
Environment protection increase
Exhaust protected by double differentiated mesh.
Cost saving
Suitable for one air connection to feed both volume boosters
on a double acting actuator.
Design advantages
Less leakage More repeatability
Using conical plug seat with controlled deformation
for elastomeric air-tight.

Key features
Suitable for
Standard, Offshore, Sandstorm, copper free ambient
condition.
Single and double acting actuators.
Low and high ambient temperature.

Exclusive manifold mounting system. It is a special STI

application to connect our accessories. Fittings or nipples are
not necessary as the connection is achieved using machined
connection faces with sealing oring. This system saves time
for assembly, reduces cost on items such as fittings, reducing
inventory and the shortened dimensions save space.

36 - AC series

STI_Depliant_accessori@1-40#.indd 36 04/02/14 17.18

 Technical specifications - Model AV 1/4

Housing materials CV Max

Painted RAL 7001 aluminum Inlet = 1
Stainless steel 316 Outlet = 1

Operating temperature*
-20C / +70C Diaphragm material
-40C / +70C available on request Elastomeric fabric reinforced
AV 1/4 ALUMINUM -20C / +85C available on request
Manifold mounting
Operating pressure Output connections
P min = 3 bar Manifold mounting
P max = 7 bar 1/4 NPT
Design pressure = 10 bar

Feeding connections
Pilot signal connection 1/4 NPT
1/4 NPT
AV 1/4 STAINLESS STEEL 316
Manifold mounting
Weight
Options Aluminum = 1,2 kg
Collected exhaust Stainless steel 316 = 3,3 kg
Silencer

(*) Lower or higher temperature available on request.

AV 1/4 ALUMINUM

Dimensional drawing

AC series - 37

STI_Depliant_accessori@1-40#.indd 37 04/02/14 17.18

 Technical specifications - Model AV 3/4

Housing materials CV Max

Painted RAL 7001 aluminum Inlet = 4,5
Stainless steel 316 Outlet = 3
AV 3/4
ALUMINUM
Operating temperature*
-20C / +70C Diaphragm material
-40C / +70C available on request Elastomeric fabric reinforced
-20C / +85C available on request

Operating pressure
Output connections
P min = 3 bar
Manifold mounting
P max = 7 bar
3/4 NPT
Design pressure = 10 bar

AV 3/4
ALUMINUM Pilot signal connection Feeding connections
Manifold mounting 1/4 NPT 3/4 NPT

Options Weight
Collected exhaust Aluminum = 4 kg
Silencer Stainless steel 316 = 10,3 kg

(*) Lower or higher temperature available on request.

Dimensional drawing

38 - AC series

STI_Depliant_accessori@1-40#.indd 38 04/02/14 17.18

 AC series - 39

STI_Depliant_accessori@1-40#.indd 39 04/02/14 17.18

 gfstudio.com
rev. 0

STI S.r.l. (Headquarter)

Via Pascoli 10 a/b
24020 Gorle (BG) Italy
Tel. +39 035 2928.2
Fax +39 035 2928.247

Bergamo
STI S.r.l. (Quarter Turn Division)
Via San Francesco 18 Malpensa
Milan
Brescia Verona
Airport Milano/

29017 Fiorenzuola dArda (PC) Italy
Tel. +39 035 2928.2 Orio al Serio
Airport
Fax +39 0523 1715.295 Linate
Airport
www.stiactuation.com Piacenza

Information in this manual is protected by copyright.

All rights are reserved. Information in this document
may be modified at any time without notice.

STI_Depliant_accessori@1-40#.indd 40 04/02/14 17.18

Total capability in valve actuation

series

PT
1960 1990 2000 Today
Our mission
Since its foundation in 1960, STI has focused on development, design and production
of complete actuation systems to operate industrial valves for the most demanding
applications and processes those applications assessed in terms of forces, speed,
accuracy or a combination of these demands. This requires not just the muscle
(the actuator, linear or quarter turn) but also the brain (the positioners and other
components, which control the motion following an inlet signal).
Our products are designed for use in the most severe service applications (valves,
dampers, fan inlet drives and other devices). Our goal is to meet customers every
specific need as a result, we specialize in customized products.
In 2002 STI was acquired by IMI (ww.imiplc.com), an international engineering
group and therefore was able to expand its presence globally. Now STI is part of IMI
Critical Engineering, one of the three IMIs business platforms. The IMI Group shares
a common goal to convert their industry knowledge and market insight into bespoke
design-engineered solutions which create customer advantage and value.
Therefore the original business approach of STI has not changed.
We call this Total capability in valve actuation.

Some actuation applications are on:

Bypass valves in large steam and gas turbines;
Anti-surge valves in LNG compressors (over 90% of compressor anti-surge
valves in LNG plants worldwide are fitted with STI actuation control systems);
Safety relief valves in large pipelines;
Combustion and exhaust valves.

The build quality of STI actuators is excellent.

They have the ability to achieve very precise control.
(Project Engineer, Gorgon LNG project)

Fast and accurate response of the recycle valve actuator allows the antisurge
controller to arrest the sudden drop in deviation and increase the compressor flow.
(Instrument Engineer, Woodside Energy ltd)

Total capability in valve actuation - 3

 series

SC is a complete line of linear pneumatic actuators purposely

designed and manufactured for the operation of flow control devices
such as dampers, louvers, butterfly and ball valves. Thanks to their
design, they find ideal application in power plants, refineries, pipe steel
works and on board of vessels. The range of products includes double
acting units and are available in different sizes.
Standard SC actuators grant excellent response times without the
use of boosters, however, an high speed design is also available.
SC actuators are integrated with a wide range of positioners and
accessories developed to meet the most adverse operating conditions.
They can be provided with gearbox for the manual operation in case of
emergency. Various linkages for the coupling to the control devices can
be designed according to the customers specific requirements.

SC
Main features & technical data:
Different strokes are available on request
Operating pressure: pneumatic version up to 10 barg
(special version available on request)
Standard operating temperature: -20C to 70C
(lower or higher temperature on option)
Built in permanent lubrication system
Cylinder Aluminum alloy for 63 to 100
Carbon steel for 125 to 420 (Chrome or nickel plated)
Caps Aluminum alloy for 63 to 260
Carbon steel for 330 to 420
Piston: aluminum alloy for 63 to 260
Carbon steel for 330 to 420
Shaft: chromium plated alloy steel
Tie rods and clevis: tropicalized
zinc-plated carbon steel
ATEX 94/9/EC and PED97/23/EC
compliance
GOST certification

4 - Total capability in valve actuation

Control actuation
systems
SCV
Main features & technical data:
Double & single acting and double acting plus
spring design
Die casting aluminum for small/medium sizes
up to ND 320
Operating pressure: pneumatic version up to
10 barg (design up to 12 barg)
Standard operating temperature: -20C to
70C (special version available on request)
Carbon steel execution for larger sizes
(stainless steel available on request)
Built in permanent lubrication system
Designed to meet SIL3 requirements
(IEC 61508) as a single device
Standard pneumatic supply medium:
air, nitrogen or sweet gas
(Special version for sour gas on request)
ATEX 94/9/EC and PED97/23/EC compliance
GOST certification
Thrust: up to 850.000 N

SCV pneumatic linear piston actuators are designed to drive control

valves for the most demanding applications of Power and Oil &
Gas Industries, such Turbine Bypass, Steam Conditioning valves,
desuperheaters, antisurge valve compressors and many others.
STIs fast stroking, highly reliable actuators have been recognized
for providing superior performance in severe service applications
for over 50 years.Thanks to the special patented design of piston,
including a double rings guiding system and a grease channel providing
continuous lubrication, SCV actuators grant smooth and precise valve
operation without any maintenance for whole operating life. SCV
actuators are designed with patented plug-in connection system for
a wide range of custom-tailored accessories and control systems to
meet the most demanding and critical operating conditions of valves.

Total capability in valve actuation - 5

 series

RTC RTQ
Compact quarter turn actuator series Quarter turn actuator series
main features & technical data: main features & technical data:
Double and single acting compact design Double and single acting modular design
Carbon steel scotch yoke mechanism Carbon steel scotch yoke mechanism
Chromium plated guide bar to absorb transverse forces Chromium plated guide bar to absorb transverse forces
Electroless nickel or chromium plated cylinder Electroless nickel or chromium plated cylinder
Designed for environmental protection up to IP67M Designed for environmental protection up to IP67M
Designed to meet SIL3 requirements (IEC 61508) as a Designed to meet SIL3 requirements (IEC 61508) as a
single device single device
PED97/23/EC compliance PED97/23/EC compliance
Standard pneumatic supply medium: air, nitrogen or sweet Standard pneumatic supply medium: air, nitrogen or
gas (special version for sour gas on request) sweet gas (special version for sour gas on request)
Standard hydraulic supply medium: mineral hydraulic oil Standard hydraulic supply medium: mineral hydraulic oil
Operating pressure: pneumatic version up to 12 barg Operating pressure: pneumatic version up to 12 barg
Hydraulic version up to 350 barg Hydraulic version up to 350 barg
Standard operating temperature: -30C to 100C Standard operating temperature: -30C to 100C
(special version available on request) (special version available on request)
Output torque: up to 7.000 Nm Output torque: Up to 600.000 Nm

6 - Total capability in valve actuation

 Pneumatic and
Hydraulic actuators

STIs know-how and application experience enable us to develop

products, services, and solutions that deliver proven performance
and reliability according to custpmers expectations; for these
reasons we are leader in valve actuation technology. RT Series is
a complete range of pneumatic and hydraulic quarter turn actuators
with materials selected to withstand the most hostile environment
conditions, suitable for all Onshore and Offshore applications, covering
the general On-Off valve and Modulating Control Valve duties. RT
Series is designed to provide maximum reliability and flexibility to
cover a wide range of valves in all pressure classes, with a full range of
STIs accessories and control systems available for any product line,
designed and manufactured to fully comply with the most demanding
customer specifications. Thanks to its sixty-year of engineering and
manufacturing experience, STI has thousands of actuators installed

RTM in most of the plants in the world.

Modulating quarter turn actuator series

main features & technical data:
Double and single acting modular design
Modulating-control specific design
No backlash on power chain
Electroless nickel or chromium plated cylinder
Designed for environmental protection up to IP67M
Designed to meet SIL3 requirements (IEC 61508) as a
single device
PED97/23/EC compliance
Standard pneumatic supply medium: air, nitrogen or
sweet gas (special version for sour gas on request)
Standard hydraulic supply medium: mineral hydraulic oil
Operating pressure: pneumatic version up to 12 barg
Hydraulic version up to 350 barg
Standard operating temperature: -30C to 100C
(special version available on request)
Output torque: up to 600.000 Nm

Total capability in valve actuation - 7

 PT
series
Positioners
FasTrak

High performances smart, 2 wires, positioner

High flow rate (Cv=2) Remote mounting option
Hart protocol Fail freeze option ( 2 wires)
Integrated position transmitter DD files for 375/475 and AMS
Exia and Exd version available
Intrinsically safe and explosion Display and push buttons
proof (ATEX, IECEX, GOST, FM, on option
CSA)

DigitalTrak

Smart 2 wires positioner

Display & push button
Fail freeze option
Integrated position transmitter

SmartTrak

Hydraulic electronic controller

Dual and single channel hydraulic Booster function
controller Hart protocol
Fully configurable
Up to 2 modulating channel and 8
on/off SOV

8 - Total capability in valve actuation

 series
Accessories
Miscellaneous

2030 CO 3 way pneumatic valves

2130 GR Manual override
AL Look up device MC Motion Converter
AV and Volume Booster SL Silencer
BD Derivative booster SR Quick discharge valve
BV Big Volume Booster TP Pressostatic switch
BW Ultra High capacity booster UD Quick Exhaust
CF Fast commutator

Advanced Diagnostic

Partial stroke test & dynamic error

Step response

Stability control

Soft approach to seat

Signal generator for frequency analysis (dynamic tests)

Valsafe SIL (Safety Integrity Level)

Safety Valve
Partial stroke tests without
interruption in plant operation

Total capability in valve actuation - 9

 AV I Volume booster

Product description
P
Th Volume Booster (model AV), available sizes 14 and 34,
The
is designed to meet high speed control valve applications.
It produces
p a high volume boosting action and contains an
integral stabilizing by-pass valve controlled by a screwdriver
int
adjustment in the body. By opening this valve it is possible
ad
improve the stability of the pneumatic circuit made up of a
im
positioner, volume booster(s) and actuator.
po

Advantages
A
Safety - more sensibility - more accuracy
Regulation screw is not ejectable by internal air pressure.
Regulation screw is accurate and lockable.
Environment protection increase
Exhaust protected by double differentiated mesh.
Cost saving
Suitable for one air connection to feed both volume boosters
on a double acting actuator.
Design advantages
Less leakage More repeatability
Using conical plug seat with controlled deformation
for elastomeric air-tight.

Key features
Suitable for
Standard, Offshore, Sandstorm, copper free ambient
condition.
Single and double acting actuators.
Low and high ambient temperature.

Exclusive manifold mounting system. It is a special STI

application to connect our accessories. Fittings or nipples are
not necessary as the connection is achieved using machined
connection faces with sealing oring. This system saves time
for assembly, reduces cost on items such as fittings, reducing
inventory and the shortened dimensions save space.

36 - AC series

STI_Depliant_accessori@1-40#.indd 36 04/02/14 17.18

 Technical specifications - Model AV 1/4

Housing materials CV Max

Painted RAL 7001 aluminum Inlet = 1
Stainless steel 316 Outlet = 1

Operating temperature*
-20C / +70C Diaphragm material
-40C / +70C available on request Elastomeric fabric reinforced
AV 1/4 ALUMINUM -20C / +85C available on request
Manifold mounting
Operating pressure Output connections
P min = 3 bar Manifold mounting
P max = 7 bar 1/4 NPT
Design pressure = 10 bar

Feeding connections
Pilot signal connection 1/4 NPT
1/4 NPT
AV 1/4 STAINLESS STEEL 316
Manifold mounting
Weight
Options Aluminum = 1,2 kg
Collected exhaust Stainless steel 316 = 3,3 kg
Silencer

(*) Lower or higher temperature available on request.

AV 1/4 ALUMINUM

Dimensional drawing

AC series - 37

STI_Depliant_accessori@1-40#.indd 37 04/02/14 17.18

 Technical specifications - Model AV 3/4

Housing materials CV Max

Painted RAL 7001 aluminum Inlet = 4,5
Stainless steel 316 Outlet = 3
AV 3/4
ALUMINUM
Operating temperature*
-20C / +70C Diaphragm material
-40C / +70C available on request Elastomeric fabric reinforced
-20C / +85C available on request

Operating pressure
Output connections
P min = 3 bar
Manifold mounting
P max = 7 bar
3/4 NPT
Design pressure = 10 bar

AV 3/4
ALUMINUM Pilot signal connection Feeding connections
Manifold mounting 1/4 NPT 3/4 NPT

Options Weight
Collected exhaust Aluminum = 4 kg
Silencer Stainless steel 316 = 10,3 kg

(*) Lower or higher temperature available on request.

Dimensional drawing

38 - AC series

STI_Depliant_accessori@1-40#.indd 38 04/02/14 17.18

 AC series - 39

STI_Depliant_accessori@1-40#.indd 39 04/02/14 17.18

 gfstudio.com
rev. 0

STI S.r.l. (Headquarter)

Via Pascoli 10 a/b
24020 Gorle (BG) Italy
Tel. +39 035 2928.2
Fax +39 035 2928.247

Bergamo
STI S.r.l. (Quarter Turn Division)
Via San Francesco 18 Malpensa
Milan
Brescia Verona
Airport Milano/

29017 Fiorenzuola dArda (PC) Italy
Tel. +39 035 2928.2 Orio al Serio
Airport
Fax +39 0523 1715.295 Linate
Airport
www.stiactuation.com Piacenza

Information in this manual is protected by copyright.

All rights are reserved. Information in this document
may be modified at any time without notice.

STI_Depliant_accessori@1-40#.indd 40 04/02/14 17.18

Total capability in valve actuation

series

PT
1960 1990 2000 Today
Our mission
Since its foundation in 1960, STI has focused on development, design and production
of complete actuation systems to operate industrial valves for the most demanding
applications and processes those applications assessed in terms of forces, speed,
accuracy or a combination of these demands. This requires not just the muscle
(the actuator, linear or quarter turn) but also the brain (the positioners and other
components, which control the motion following an inlet signal).
Our products are designed for use in the most severe service applications (valves,
dampers, fan inlet drives and other devices). Our goal is to meet customers every
specific need as a result, we specialize in customized products.
In 2002 STI was acquired by IMI (ww.imiplc.com), an international engineering
group and therefore was able to expand its presence globally. Now STI is part of IMI
Critical Engineering, one of the three IMIs business platforms. The IMI Group shares
a common goal to convert their industry knowledge and market insight into bespoke
design-engineered solutions which create customer advantage and value.
Therefore the original business approach of STI has not changed.
We call this Total capability in valve actuation.

Some actuation applications are on:

Bypass valves in large steam and gas turbines;
Anti-surge valves in LNG compressors (over 90% of compressor anti-surge
valves in LNG plants worldwide are fitted with STI actuation control systems);
Safety relief valves in large pipelines;
Combustion and exhaust valves.

The build quality of STI actuators is excellent.

They have the ability to achieve very precise control.
(Project Engineer, Gorgon LNG project)

Fast and accurate response of the recycle valve actuator allows the antisurge
controller to arrest the sudden drop in deviation and increase the compressor flow.
(Instrument Engineer, Woodside Energy ltd)

Total capability in valve actuation - 3

 series

SC is a complete line of linear pneumatic actuators purposely

designed and manufactured for the operation of flow control devices
such as dampers, louvers, butterfly and ball valves. Thanks to their
design, they find ideal application in power plants, refineries, pipe steel
works and on board of vessels. The range of products includes double
acting units and are available in different sizes.
Standard SC actuators grant excellent response times without the
use of boosters, however, an high speed design is also available.
SC actuators are integrated with a wide range of positioners and
accessories developed to meet the most adverse operating conditions.
They can be provided with gearbox for the manual operation in case of
emergency. Various linkages for the coupling to the control devices can
be designed according to the customers specific requirements.

SC
Main features & technical data:
Different strokes are available on request
Operating pressure: pneumatic version up to 10 barg
(special version available on request)
Standard operating temperature: -20C to 70C
(lower or higher temperature on option)
Built in permanent lubrication system
Cylinder Aluminum alloy for 63 to 100
Carbon steel for 125 to 420 (Chrome or nickel plated)
Caps Aluminum alloy for 63 to 260
Carbon steel for 330 to 420
Piston: aluminum alloy for 63 to 260
Carbon steel for 330 to 420
Shaft: chromium plated alloy steel
Tie rods and clevis: tropicalized
zinc-plated carbon steel
ATEX 94/9/EC and PED97/23/EC
compliance
GOST certification

4 - Total capability in valve actuation

Control actuation
systems
SCV
Main features & technical data:
Double & single acting and double acting plus
spring design
Die casting aluminum for small/medium sizes
up to ND 320
Operating pressure: pneumatic version up to
10 barg (design up to 12 barg)
Standard operating temperature: -20C to
70C (special version available on request)
Carbon steel execution for larger sizes
(stainless steel available on request)
Built in permanent lubrication system
Designed to meet SIL3 requirements
(IEC 61508) as a single device
Standard pneumatic supply medium:
air, nitrogen or sweet gas
(Special version for sour gas on request)
ATEX 94/9/EC and PED97/23/EC compliance
GOST certification
Thrust: up to 850.000 N

SCV pneumatic linear piston actuators are designed to drive control

valves for the most demanding applications of Power and Oil &
Gas Industries, such Turbine Bypass, Steam Conditioning valves,
desuperheaters, antisurge valve compressors and many others.
STIs fast stroking, highly reliable actuators have been recognized
for providing superior performance in severe service applications
for over 50 years.Thanks to the special patented design of piston,
including a double rings guiding system and a grease channel providing
continuous lubrication, SCV actuators grant smooth and precise valve
operation without any maintenance for whole operating life. SCV
actuators are designed with patented plug-in connection system for
a wide range of custom-tailored accessories and control systems to
meet the most demanding and critical operating conditions of valves.

Total capability in valve actuation - 5

 series

RTC RTQ
Compact quarter turn actuator series Quarter turn actuator series
main features & technical data: main features & technical data:
Double and single acting compact design Double and single acting modular design
Carbon steel scotch yoke mechanism Carbon steel scotch yoke mechanism
Chromium plated guide bar to absorb transverse forces Chromium plated guide bar to absorb transverse forces
Electroless nickel or chromium plated cylinder Electroless nickel or chromium plated cylinder
Designed for environmental protection up to IP67M Designed for environmental protection up to IP67M
Designed to meet SIL3 requirements (IEC 61508) as a Designed to meet SIL3 requirements (IEC 61508) as a
single device single device
PED97/23/EC compliance PED97/23/EC compliance
Standard pneumatic supply medium: air, nitrogen or sweet Standard pneumatic supply medium: air, nitrogen or
gas (special version for sour gas on request) sweet gas (special version for sour gas on request)
Standard hydraulic supply medium: mineral hydraulic oil Standard hydraulic supply medium: mineral hydraulic oil
Operating pressure: pneumatic version up to 12 barg Operating pressure: pneumatic version up to 12 barg
Hydraulic version up to 350 barg Hydraulic version up to 350 barg
Standard operating temperature: -30C to 100C Standard operating temperature: -30C to 100C
(special version available on request) (special version available on request)
Output torque: up to 7.000 Nm Output torque: Up to 600.000 Nm

6 - Total capability in valve actuation

 Pneumatic and
Hydraulic actuators

STIs know-how and application experience enable us to develop

products, services, and solutions that deliver proven performance
and reliability according to custpmers expectations; for these
reasons we are leader in valve actuation technology. RT Series is
a complete range of pneumatic and hydraulic quarter turn actuators
with materials selected to withstand the most hostile environment
conditions, suitable for all Onshore and Offshore applications, covering
the general On-Off valve and Modulating Control Valve duties. RT
Series is designed to provide maximum reliability and flexibility to
cover a wide range of valves in all pressure classes, with a full range of
STIs accessories and control systems available for any product line,
designed and manufactured to fully comply with the most demanding
customer specifications. Thanks to its sixty-year of engineering and
manufacturing experience, STI has thousands of actuators installed

RTM in most of the plants in the world.

Modulating quarter turn actuator series

main features & technical data:
Double and single acting modular design
Modulating-control specific design
No backlash on power chain
Electroless nickel or chromium plated cylinder
Designed for environmental protection up to IP67M
Designed to meet SIL3 requirements (IEC 61508) as a
single device
PED97/23/EC compliance
Standard pneumatic supply medium: air, nitrogen or
sweet gas (special version for sour gas on request)
Standard hydraulic supply medium: mineral hydraulic oil
Operating pressure: pneumatic version up to 12 barg
Hydraulic version up to 350 barg
Standard operating temperature: -30C to 100C
(special version available on request)
Output torque: up to 600.000 Nm

Total capability in valve actuation - 7

 PT
series
Positioners
FasTrak

High performances smart, 2 wires, positioner

High flow rate (Cv=2) Remote mounting option
Hart protocol Fail freeze option ( 2 wires)
Integrated position transmitter DD files for 375/475 and AMS
Exia and Exd version available
Intrinsically safe and explosion Display and push buttons
proof (ATEX, IECEX, GOST, FM, on option
CSA)

DigitalTrak

Smart 2 wires positioner

Display & push button
Fail freeze option
Integrated position transmitter

SmartTrak

Hydraulic electronic controller

Dual and single channel hydraulic Booster function
controller Hart protocol
Fully configurable
Up to 2 modulating channel and 8
on/off SOV

8 - Total capability in valve actuation

 series
Accessories
Miscellaneous

2030 CO 3 way pneumatic valves

2130 GR Manual override
AL Look up device MC Motion Converter
AV and Volume Booster SL Silencer
BD Derivative booster SR Quick discharge valve
BV Big Volume Booster TP Pressostatic switch
BW Ultra High capacity booster UD Quick Exhaust
CF Fast commutator

Advanced Diagnostic

Partial stroke test & dynamic error

Step response

Stability control

Soft approach to seat

Signal generator for frequency analysis (dynamic tests)

Valsafe SIL (Safety Integrity Level)

Safety Valve
Partial stroke tests without
interruption in plant operation

Total capability in valve actuation - 9

 STI actuators and accessories are installed in demanding
applications therefore it is crucial to keep them operating at top
performances.
STI provides a wide range of aftermarket support services,
from web-based spare parts availability to components express
delivery service. A team of qualified engineers is available
for customer support, including on-site, for commissioning,
troubleshooting and maintenance activities.
Most of STI actuators are equipped with diagnostic
communication tool to deliver plants operators with information
about optimal equipments performances and compliance to
safety and regulatory requirements.

10 - Total capability in valve actuation

 Aftermarket support
Service
Installation and commissioning

Failure analysis and

performance improvement

Inspection and Repair

of damaged parts and
components

Emergency Services

Upgrading of existing
actuators to propose always
the best new solution
available for your system

Over 50 years experience

and knowledge of control
actuators for severe
service applications

If you have any problem

contact us at:
support@stistrumentazione.com

Total capability in valve actuation - 11

 Total capability in valve actuation

gfstudio.com
STI S.r.l. (Headquarter)
Via Dei Caravaggi 15
24040 Levate (BG) Italy
Tel. +39 035 2928.2
Fax +39 035 2928.247

STI S.r.l. (Quarter Turn Division)

Via San Francesco 18
29017 Fiorenzuola dArda (PC) Italy
Tel. +39 035 2928.2
Fax +39 0523 1715.295

www.stiactuation.com

Bergamo

Malpensa
Milan
Brescia Verona
Airport Milano/
Orio al Serio
Airport
Linate
Airport
Piacenza

Made in Italy
Control drive Linear Quarter turn Positioners Accessories

V large enclosed damper actuator C compact actuator AL air-lock

actuator
AV volume booster
L enclosed V valve actuator Q high torque
actuator actuator BD derivative booster

M modulating BV big volume booster

actuator
BW ultra high capacity
SA/CL DE-3/M booster
CO 3-way valve
SR/CCK CRP-3/M
GR manual override
SA-1 UP
MC motion converter

UD derivative unit
Total capability in valve actuation
Company
presentation
Company
Established 1960 in Gorle, Bergamo, Italy
Acquired by IMI 2002, part of IMI Critical Engineering
Opened a Quarter Turn division near Piacenza, Italy
Since 2014 located in Levate, Bergamo, Italy
More than 100 employees
Several International Patents, Certifications & Approvals
Key Markets are Oil & Gas and Power
Development, Design and Production of Pneumatic Actuation
Control Systems for Severe Services
Over 90% of compressor antisurge valves in LNG WW are
fitted with STI actuation control systems

2
What we do
An actuator is a type of motor for moving or controlling
a mechanism or system. It is operated by a source of
energy, usually in the form of an electric current,
hydraulic fluid pressure or pneumatic pressure, and
converts that energy into some kind of motion.

STI core business is development, design and manufacture

of pneumatic actuators to operate modulating equipments
such as valves, dampers, fans inlet drives and other
devices.
We focused on demanding applications in terms of forces,
speed, accuracy, or a combination of them.
This requires not just the muscle (the actuator) but also the
brain (the positioners and other components which control
the motion following an inlet signal).

3
 We provide
complete pneumatic control systems for critical
service,

customized actuators and

special equipments.
Images can be inserted

4
Business model
STI is capturing all opportunities related
to the flow control business due to:
Its FULL range of products.
Its LARGE SCALE production
capacity.
Its focus on CUSTOMIZATION
following customers and projects
specifications. We REALIZE your
NEEDS in actuation and you choose
what you get.
Its HYSTORY and PRESENCE in the Images can be inserted
market and in major Vendors List with
a highest number of customers in the
world SATISFIED about STI products.

5
Applications

Images can be inserted

6
 Applications

UP / Midstream O&G POWER

Compressor anti-surge Turbine bypass systems
Hot gas bypass Steam damper heating
Choke valves Boiler level control (inc.
Gas to flare Nuclear)
Dampers for fans Pump recirculation
Louvers Emergency shut down
Line isolation
Dampers for fans
Louvers
Competitors actuator
Competitor actuator called PUZZLE
Various Accessories Various different companies

Positioner: Company A

Linkage: poor without

engineering
(Company B)

Air-lock: not integrated

dangerous execution
(Company C)
Cylinder: Company D

8
 Competitors actuator

COMPETITORS DISADVANTAGES STIS ADVANTAGES

Single device designed independently. All devices designed to provide
Devices usually designed for integrated solutions.
automation on process industry not for Designed for high performance.
Power and Oil&Gas plants. Devices purposely designed for Power
No specific knowledge of needs for and Oil&Gas plants.
Power industry. High specific knowledge of needs for
Independent operation for each Power industry.
equipment (not integrated control Integrated operation for each equipment
loop). (with integrated control loop).
Low flexibility on applications. High flexibility to design specific
Difficult assistance and technical solutions.
service. There are too many different Excellent assistance and technical
manufacturer for only one applications. service. Only one company to solve
your problems.
9
Our brands

Linear Control Quarter

Positioners Accessories
drive turn

damper V large C compact AL air-lock

actuator enclosed actuator AV volume booster
actuator
BD derivative
V valve L enclosed Q high torque booster
actuator actuator actuator BV big volume
booster
B for metering M modulating BW ultra high
SA/CL DE-3/M
pump actuator capacity booster
CO 3-way valve
BQ for metering
SR/CCK CRP-3/M GR manual override
pump
MC motion
SA-1 UP converter
UD derivative unit

Actuator general features

Double piston guide system, patented life self lubricated.

Strong cone locking at piston / stem connection.

Lower bearing guide system and effective stem guide by

long bearing in the cover for spring actuator.

Specific safety spring design.

Most of actuators have manifold mounting connection

system.

11
 Actuator general features

USUAL DESIGN: STI DESIGN:

Piston Guiding System: Piston Guiding System:

Single O ring design D O ring

Teflon guide
Lower Bearing Guiding:
Thicker Piston
Not considered (most of
cases) Lower Bearing Guiding:
Oil bronze bushing Anodized aluminum bearing
Grease plug
BEARING Thrust Inner and outer O ring
GUIDING Rings
Grease 2 Thrust rings, 1 wiper ring
Plug Wiper
Ring

12
 Actuator general features

Key features
PISTON
GUIDING

Teflon Guide

Grease Trap

O-Ring

Option below is only for

SC/V with spring. PISTON
GUIDING
TRIPLE
GUIDING FOR
BEARING
GUIDING
SPRING
ACTUATORS

13
Actuator general features

Strong cone locking at

piston / stem connection.

Double piston guide , life

lubricated.

Effective stem guide by long

bearing in the cover.

Designed for easy mounting

and high cross section port
accessories.

14
Actuator general features
STI design:
Piston Guiding System:
The grease reservoir continuously provides lubrication for long service life
and low friction (permanent lubrication)
Teflon ring provide a mechanical guide to the piston
Thicker Piston is a more robust design
Elimination of O ring roll over
Lower Bearing Guiding:
New material reduces friction on actuator stem
Grease trap provides constant lubrication to the stem
Plug reduces maintenance time with easy access for adding grease
Additional O ring provides added sealing
Thrust rings provide added guiding by absorbing radial stress
The wiper ring keeps debris out of sealing surfaces
15
Actuator general features
No spring torque by means of
bearing.

Triple guide for less radial stress.

Safety disassembling system.

Strong cone locking at piston /

stem connection.

Double piston guide , life

lubricated.

Designed for easy mounting and

high cross section port
accessories.

16
Actuator general features

MANIFOLD MOUNTING SYSTEM:

A plug-in system is used to apply the
accessories in order to:
maximize the port size connection
(Max CV);
reduce the actuator overall dimension;
have an easy and fast mounting;
reduce the use of hoses and fittings;
minimize vibration effect.
17
Manifold mounting system

18
Manifold mounting system

19
Linear actuator SC Series
SC Damper actuator
Designed to meet SIL3 requirements as a single device
ATEX 94/9/EC and PED 97/23/EC compliance
Operating pressure: max 1.000 kPa
Standard operating temperature: -20C to +70C
Thrust: up to 850.000 N

SCV Valve actuator

Designed to meet SIL3 requirements as a single device
ATEX 94/9/EC and PED 97/23/EC compliance
GOST certification
Operating pressure: pneumatic version up to 10 barg
Standard operating temperature: -20C to 70C
Thrust: up to 2 millions N

20
Linear actuator SC Series

SC line for dampers

Sizes 63 to 650 mm.

Available sizes (mm): 63, 100, 125, 160, 200, 260, 330, 390,
420, 520, 600, 650.
Strokes 60 to 1400 mm.
Small size available made of Aluminum (from 63 to
260 mm), bigger size made of carbon steel or
316 stainless steel.
Installed directly on the damper.
Actuators stroke can be reduced according
to the specification (longer strokes are
available on request).
21
Linear actuator SC Series

SC/V General purpose actuators

Body made of cast aluminum.

Stroke reduction made by spacers.
Thrust up to 40000 N / 9000 lbf.
Available as double acting and spring
return.
Sizes available ND 150 200 250 320
mm.
Maximum stroke available is 305 mm.

22
Linear actuator SC Series

SC/V Heavy-duty actuators

Cylinder/covers (end caps) made of

carbon steel or 316 stainless steel.
Stroke made according to the
specification.
Thrust up to 300000 N / 67500 lbf
(higher thrusts on request).
Available as double acting and spring
return.
Available sizes from ND 260 mm up to
1400 mm.
23
Linear actuator SC Series

SC/V Heavy-duty actuators

TYPE ACTIVE THRUST at

AREA 5 barg
SC/V Cm^2 N
600 TANDEM 5.645 282.250
600 TRIPLEX 8.476 423.800
650 TANDEM 6.630 331.500
650 TRIPLEX 9.937 496.850
850 TANDEM 11.342 567.143
850 TRIPLEX 17.014 850.700
* TANDEM: 2 pistons in parallel
* TRIPLEX: 3 pistons in parallel

24
Linear actuator SC Series

SC/V Spring Return Actuators

Available in a wide range of solutions:

single acting spring return and double
acting plus spring.

25
Linear actuator SC Series

Large sizes: SC/V 300-400-500.

Long strokes: up to 600 mm (24).

Side mounted positioner.

Plug stop in the valve.

Double acting - low volume construction.

Light materials (amalgon cylinder with

aluminum caps).

Long extra strokes (25 mm per actuator

side in most of cases, 7 mm per side for
shortest strokes only).
26
Linear actuator SC Series

27
 Control drive actuators
CM Series
CML Enclosed actuator
Housing: carbon steel
Shaft and lever: carbon steel
Standard painting: epoxy
Max. operating pressure: 7 bar
Supply: dry instrument air
Working angle of actuator lever:
CML 63/125 and 100/100: 90
CML 100/200 and 125/200: 70
Operating temperature: -20C / +70C
Torque from 140 Nm to 1000 Nm (70)
CMV Large enclosed actuator
Housing: carbon steel
Standard painting: epoxy
Max. operating pressure: 7 bar
Supply: dry instrument air 35/100 Psig
Lever operating angle: 70
Control signal: 3 / 15 Psig or 4/20 mA
Operating temperature: -20C / +70C
Torque from 1240 Nm to 41190 Nm (70)
28
Quarter turn actuators
RT Series
RT Series is a complete range of pneumatic and hydraulic actuators with
material selected to withstand the most hostile environment conditions,
suitable for Onshore and Offshore application, covering the On-Off
and Modulating Control valve duties.

RTC Compact quarter turn actuator

Designed for environmental protection up to IP66 / IP67M
Up to SIL3 requirements as a single device
Actuators certified in accordance with PED 97/23/EC and/or
ATEX 94/9/EC
Standard hydraulic supply medium: mineral oil
Operating pressure: Pneumatic up to 12 barg / Hydraulic up to 350 barg
Standard operating temperature: -30C to 100C
Output torque: from 40 Nm up to 6.000 Nm for double acting version
Spring Ending Torque: from 40 Nm up to 2.500 Nm for single acting version

29
Quarter turn actuators
RT Series

BENEFITS

RTC:
Rugged steel housing & high-strenght alloy steel scotch yoke ensure safe and reliable
operation.
Housing is not under pressure, reducing points of leakage and simplifying
maintenace.
Available in double-acting and spring return.
Symmetric or Canted scotch-yoke for ideal torque distribution.
Designed to provide high torque with minimum space and weight.
Spring package, is installed inside the cylinder; cylinder seals can be replaced safely
without spring removal.
Maximum safely is ensured by design of spring packs as spring compression is
indipendent from removal of cylinder cap &tie rods.

30
 Quarter turn actuators
RT Series
RTQ Quarter turn actuator
Designed for environmental protection up to IP66 / IP67M
Up to SIL3 requirements as a single device
Actuators certified in accordance with PED 97/23/EC and/or
ATEX 94/9/EC
Standard hydraulic supply medium: mineral oil
Operating pressure: Pneumatic up to 12 barg / Hydraulic up to 350 barg
Standard operating temperature: -30C to 100C
Output torque: from 2.000 Nm up to 600.000 Nm for double acting version
Spring Ending Torque: from 1.650 Nm up to 165.000 Nm for single
acting version

31
Quarter turn actuators
RT Series

BENEFITS

RTQ:
Welded carbon steel housing & hi-strenght scotch-yoke ensure safe and
reliable operations.
Low friction heavy-duty nickel or chrome plated cylinders allows high
performance & long life of the pneumatic cylinder.
Available in double-acting and spring return.
Lightweight but rugged actuators series with both Symmetric or Canted scotch-
yoke for ideal torque distribution.
Internally coated waterproof housing, for long-lasting corrosion resistance.
Selected material and surface treatments for top-in class performances.
Stainless steel travel stops allow fine angular stroke adjustments between 82 &
98.

32
Positioners PT Series

Smart type (Very High Flow Rate)

Traditional type
Pneumatic or Electro-pneumatic (High-flow spool valve
size 1/2 available on request)
Intrinsically Safe &Explosion proof executions

33
 Positioners PT Series

FT FasTrak smart positioner

Unique big CV 2.
Suitable for Natural Gas certified.
Integrated position transmitter.
Environmental protection: IP66.
Remote mounting option.
Aluminum and stainless steel 316 housing available.
Analog output 4-20 mA.
Fail freeze option (2 wires).
Air supply pressure: 2,5/10 bar.
E xia and E xd version (also for natural gas option). FasTrak with display and

Several certifications available. push buttons option (E xd)

Standard operating temperature: -40C to +80C.

Display and push buttons option.
Auto tuning on control stroking time applications: from 0,5 sec to 50 sec.

34
Positioners PT Series

FT Advantages

No more booster & quick exhaust

valves less components installed.
Better quality of control.
Cost saving.
Space saving.
Less parts to stock.

35
Positioners PT Series
How to move 1 ton valve plug for 500 mm in 1 sec with 1mm accuracy
and no overshoot ? And by using compressible power media (air)?

Competitors Solution Solution

Multiple boosters and trip valves. Poor performances
and reliability, has lot of fittings and leakage points.

Cv=16 Linear Actuators

Cv=3
Cv=2,3

Cv=0,3

BW flow amplifiers offer

Smart huge flow Capacity and
Positioner tight shutoff eliminating
need for large trip
valves, only small pilot
valves are needed.
Booster Trip valve

36
Positioners PT Series

Traditional positioner

Pneumatic & Electro-Pneumatic

Linkages designed to reduce linearity error to
UP-2
minimum value
Integrated pneumatic valves
Modular Design

CRP-3/M

DE/3M SA-1
SR-CCK SA/CL

37
Accessories AC Series

Selection of accessories

Customers requirements & Project Technical Specifications

Size & Type based on technical data (P, size of actuator, stroke,
velocity etc.)
More solutions for same purpose
Choice: technical & economical aspects

38
Accessories AC Series
Motion Converter - MC Air-Lock - AL

Aluminum

Stainless Steel 316

Aluminum

Safety / Emergency functions

Stainless Steel 316
Air and/or Energy failure

39
Accessories AC Series
Position transmitter (2030) & Limit switch (2130)

2030

2130

40
 Accessories AC Series
Derivative Unit - UD
Derivative Booster - BD

Stainless Steel 316

Aluminum

Manual override GR

41
Accessories AC Series
Volume Booster AV, BV & BW

BV
AV
BW

42
 Accessories AC Series
3-Way Valves - CO

1 2

43
 R&D Laboratory

We have a laboratory in which we can do

tests and trainings to our customer.

44
Aftermarket service
With several thousand actuators operating in every industry from
mosto severe and remote locations down to the suburb you live,
our reliability is world wide recognized.

STI technicians are always

available to give maximum
support on site for start-up,
commissioning and in case of
trouble shooting.

The advantage to chose us as supplier is that you need only one

company to solve your problems.
We have Total capability in valve actuation.
45
 Aftermarket service
Spare parts service : to
Remote customer care : guarantee original spare parts
telephone assistance during interchangeable with existing
start-up, commissioning or one
normal operation
Upgrade service : to propose
always the best new solution
Field Service on site : for available for your system
spare parts installation and
upgrade Training on site : for better
calibration and knowledge of our
Maintenance Service on site : system
for regular maintenance of our
actuator and accessories Fast delivery : 24 hours spare
parts shipment service
46
 Approvals & Certifications

This is a (partial and continuously

evolving) list of our international
approvals and certifications.

47
Technology and Performances

Leading on innovation

Images can be inserted

48
Conclusion

Our goal is to be not just a supplier of products and

services but a provider of value-added solutions for
our customers.

49
 Thank you
See us on www.stiactuation.com