Diesel generator set

B series
with user friendly PCC 0301 genset controller

Specification sheet
66-112 kWe, 82.5-140 kVA Prime

Our energy working for you.TM

Latest technology product : Lowest operating costs

Value for money All elements of the Cummins ® ‘B series’ DG sets are designed
The Cummins ® ‘B series’ engine powered diesel generating from the start to work together to maximize efficiency, even at
sets offer the best fuel economy, best warranty terms and part loads, thus offering you the advantage of lowest operating
lowest cost of maintenance thereby proving to be the most costs.
economical power solution. With the superior designed engine
and world class Cummins Generator Technologies (Stamford) Single source power assurance
make alternator, the gensets come equipped with Cummins
The rugged and reliable Cummins ® ‘B series’ DG sets are unique,
corporate genset controller for ease of use and monitoring
because all the major components - the engine, alternator, control
generator performance.
system and canopy are manufactured by Cummins India. This
integral approach means each element of a generating set is
Silent, compact and light weight designed to work in harmony from the start. A high quality
The Cummins ® ‘B series’ DG sets are smaller and lighter than product, complemented by the largest customer support network
any other DG set in it’s class, thus giving you the advantage of in India, providing round-the-clock service and spares support,
optimising your valuable space. offers you SINGLE SOURCE POWER ASSURANCE from the
world leaders in power generation.
Environment friendly power
Standard scope
The Cummins ® ‘B series’ base DG sets are available with the
lowest noise levels in it’s range and are CPCB certified for Engine: Cummins ® ‘B series’ diesel generating sets, powered
emissions and noise compliance, thus offering you environment by Cummins ® ‘B series’ engines, are rated at 1500 RPM and
friendly power. conform to ISO 8528 specifications. The engines are radiator
cooled, four stroke and multi-cylinder, conforming to BS 5514 /
The genset powered by the reliable ISO 3046.
Cummins ® ‘B series’ diesel engine meets
stringent exhaust emission tests as per The scope of supply includes:
MOEF norms without sacrificing fuel - Electrical starter motor 12V DC
efficiency at normal operating loads. - Battery charging alternator
- MICO fuel system with mechanical governor
- Dual spin-on fuel filter
- Turbocharger
- Residential silencer
Unmatched warranty - Dry type air cleaner
- Shut-off coil with safeties for LLOP/HWT
The Cummins ® ‘B series’ DG sets are backed by the industry
- Flywheel and flywheel housing
aknowledged best-in-class comprehensive warranty on the
- First fill of lube oil and coolant
entire package including rubber components.
- Electronic governor for 140 kVA

Alternator: Stamford alternator from Cummins Generator

Technologies, suitable for operation at 1500 RPM,
© 2008 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire
and Cummins are registered trademarks of Cummins Inc. PowerCommand is a registered
system, conforming to BS 5000 / IS 4722. The Alternator is
trademark of Cummins Power Generation Inc. “Our energy working for you.” is a trademark
of Cummins Power Generation. brushless type, screen protected, revolving field, self excited,
PGBU/CIL/004/B 75-140 kVA/CPG/90Deg./March 2008/Qty.
 self regulated through an AVR. The alternator has the following - LED indicating lamps – The control includes LED lamp
features: indication for the following functions:
1. Fail to start
- + 1.0 % Voltage regulation (max) in static conditions 2. Overspeed, underspeed
- IP: 23 protection with insulation class H 3. Low oil pressure
- Permissible overload of 10% for one hour in 12 hours of - LCD engine hour counter – The control includes an LCD
operation engine hour counter. The counter will increment whenever the
engine is running.
Mounting arrangement: Engine and alternator are mounted
on a common MS fabricated base frame with AVM pads. Functions : Control / Protection
Control Protection
Control panel: The control panel is manufactured with 14/16 Remote Start – When in MANUAL/AUTO mode - Overspeed shutdown
gauge CRCA sheet and is powder coated for a weather-proof the control accepts a ground signal from remote
and long lasting finish. The control panel consists of the devices to automatically start the generator set.
following common parts: Engine Starting – The control system supports - Low lube oil Pressure
automatic engine starting, which includes solid shutdown
state outputs for starter control, and fuel solenoid - High engine water
- Aluminum busbars of suitable capacity with incoming and out-
control. The start disconnect is achieved by temperature shutdown
going termination monitoring main alternator output frequency.
- Current transformers
Starting Sequence – In the MANUAL/AUTO mode, - Underspeed
- Indicating lamps for “Load On” and “Set Running” the crank cycle is repeated up to 3 times, if starting shutdown
- Instrument fuses duly wired and ferruled is still unsuccessful a Fail to Start fault is generated. - Fail to start, shutdown
- MCCB of suitable rating with overload and short circuit If the engine starts, the crank cycle is terminated at after 3 Attempts
a crank disconnect frequency of 20 Hz. - Battery charging
protection
alternator fail warning
- PowerCommand® Controller

PowerCommand® genset controller: Genset controller for Genset controller: (For 140 KVA)
true power system reliability, flexibility, and ease of use. Cummins PowerCommand ® PCC 1301 is a microprocessor
based integrated generator set monitoring, metering, protection
Genset controller: (For 75-125 KVA) and control system with built-in torque matched Volts/Hz
Cummins PowerCommand™ PCC 0301 overload control.
control is a microprocessor based
generator set monitoring and control Single control for all
system mounted in the Genset Control genset functions:
Panel. The control provides a simple - Digital governing
operator interface to the generator set, - Digital voltage control
manual and remote start/stop control, shutdown fault indication, - Engine control
and an LCD hour counter. The integration of all functions into a - Operator interface
single control system provides enhanced reliability and - Protection
performance compared to conventional generator set control - Advanced control functions
systems.
Standard features of genset controller:
The controller with Keyswitch / Autostart functionality has a
Engine
Multifunction Meter which displays the below mentioned
Metering Protection
parameters : - RPM - Low lube oil pressure - Fail to crank
- Voltage - Water temperature - kVA - Battery voltage - High water temp. - Fail to start
- Current - Oil pressure - kW - Lube oil pressure - High /low DC voltage - Sensor failure
- Coolant temp. - Weak battery
- Frequency
- Running hours - Overspeed

Control system: The standard control system includes all the Alternator
functions necessary to locally or remotely start and stop and Metering Protection
protect the generator set. - 3 phase voltage - Under voltage - Field overload
(L-L and L-N) - Over voltage
- Key switch – OFF and MANUAL/AUTO - In the OFF mode, the
- 3 phase current - Over current
generator set is immediately shut down (if running) and cannot - Frequency - Under/ over-frequency
be started. It also resets any faults. In this mode, all power is - kVA - Loss of sensing
removed from the control and its outputs. In MANUAL/AUTO
mode, the control is powered. The manual start pushbutton Others
- Battle switch function
and remote start input become enabled.
- Delay start/ stop
- Manual start button – This button will initiate a genset start - Configurable cranking cycle
sequence when the control is in MANUAL/AUTO mode. This - Sleep mode time
button is locked out when the engine is running.
www.cumminsindia.com
Our energy working for you.TM
© 2008 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation
and Cummins are registered trademarks of Cummins Inc. PowerCommand is a registered
trademark of Cummins Power Generation Inc. “Our energy working for you.” is a trademark
of Cummins Power Generation.
PGBU/CIL/004/B 75-140 kVA/CPG/90Deg./March 2008/Qty.
 Acoustic enclosure: - Use of special hardware for longer life
- Insulation material meets exacting IS 8183 specifications for
The acoustic enclosure is made of 1.6/ 2 mm thick CRCA
better sound attenuation
sheets in Munsel green shade and a structural/ sheet metal base
- Flush styling - no projections
frame painted in black. The walls of the enclosure are insulated
- Fluid drains for lube oil and fuel
with fire retardant foam so as to comply with the 75 dBA at mtr
- Fuel filling point
sound levels specified by Ministry of Environment & Forest.
Others:
The enclosure has the following features:
- Specially designed to meet stringent MOEF/ CPCB norms of - Fuel tank suitable for 8 hours of operation
75 dBA @ 1mtr at 75% load under free field conditions
- Single point lifting for easy handling at customer site Optionals
- Designed to have optimum serviceability
- Heavy duty air cleaner
- Air inlet louvers specially designed to operate at rated load -
- Microprocessor / relay based AMF control panel
Made on special purpose CNC machines for consistency in
- Trolley mounted mobile sets
quality and workmanship
- Cold starting kit
- Powder coated for long lasting service life and superior finish
- Electronic governor
- With UV resistant powder coating, can withstand extreme
- Lube oil heater
environments

Technical data
Generator set specifications
Model C 75 D5 P / C 82.5 D5 P C 100 D5 P C 125 D5 P C 140 D5 P
Prime Power Rating kVA / kW 75 kVA /60 kW / 82.5 kVA / 66 kW 100 kVA /80 kW 125 kVA /100 kW 140 kVA /112 kW
Current (Amps) 104 / 115 139 174 195
No. of Phases 3 Phase 3 Phase 3 Phase 3 Phase
Power Factor 0.8 (lag) 0.8 (lag) 0.8 (lag) 0.8 (lag)

Engine specifications
Make Cummins Cummins Cummins Cummins
Model 6BT5.9G1 6BTA5.9G1-I 6BTA5.9G2-I 6BTAA 5.9G1-I
BHP 105 124 154 170
Cooling Water Cooled Water Cooled Water Cooled Water Cooled
Aspiration Turbocharged Turbocharged Turbocharged Turbocharged
Aftercooled Aftercooled Charged Air Cooled
No. of Cylinders 6 6 6 6
RPM 1500 1500 1500 1500
Bore (mm) x Stroke (mm) 102 x 120 102 x 120 102 x 120 102 x 120
Compression Ratio 17.6:1 17.6:1 17.6:1 17.6:1
Displacement (Ltrs.) 5.88 5.88 5.88 5.88
Fuel HSD HSD HSD HSD
Fuel Consumption (Ltr/hr) @ 75% Load 14.3 16.9 20.8 22.9
with Radiator & Fan
Governor Mechanical Mechanical Mechanical Electronic
Starting System 12 V Electrical 12 V Electrical 12 V Electrical 12 V Electrical
Lube oil Specification CF4 15W40 CF4 15W40 CF4 15W40 CF4 15W40
Lube oil Sump Capacity (Ltrs.) 14.3 14.3 14.3 14.3
Lube oil consumption (LPH) 0.04 / 0.047 0.026 0.03 0.04
Total Coolant Capacity (Ltrs.) 22 24.5 24.5 24.5
Exhaust Pipe Size (mm) 100 100 100 100
Battery Capacity / Rating 150 AH 12 V 150 AH 12 V 150 AH 12 V 150 AH 12 V

Alternator specifications
Voltage 380 / 415 380 / 415 380 / 415 380 / 415
RPM / Frequency 1500 / 50 Hz 1500 / 50 Hz 1500 / 50 Hz 1500 / 50 Hz
Enclosure IP 23 IP 23 IP 23 IP 23
Voltage Regulation (max) +/- 1% +/- 1% +/- 1% +/- 1%
Class of Insulation H Class H Class H Class H Class
Recommended Cable size x Runs 95 x 1 120 x 1 185 x 1 or 95 x 2 240 x 1 or 120 x 2
(Al Armoured 3 1/2 core)

www.cumminsindia.com
Our energy working for you.TM
© 2008 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation
and Cummins are registered trademarks of Cummins Inc. PowerCommand is a registered
trademark of Cummins Power Generation Inc. “Our energy working for you.” is a trademark
of Cummins Power Generation.
PGBU/CIL/004/B 75-140 kVA/CPG/90Deg./March 2008/Qty.
Conformance standards Emergency Standby Power (ESP):
Applicable for supplying power to varying electrical load for
IS 4722, BS 5000, IS 1460, ISO 8528, BS 5514, ISO 3046 the duration of power interruption of a reliable utility source.
Emergency Standby Power (ESP) is in accordance with
Rating definitions ISO 8528. Fuel Stop power in accordance with ISO 3046,
Prime Power (PRP): AS 2789, DIN 6271 and BS 5514.
Applicable for supplying power to varying electrical load for
unlimited hours. Prime Power (PRP) is in accordance with - Fuel consumption data is based on diesel having specific
ISO 8528. Ten percent overload capability is available in gravity of 0.85 and conforming to IS:1460
accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514. - Oil consumption data is based on oil having specific gravity of
0.89 and meeting CF4 API categories
- Fuel consumption tolerance is +5%

Typical enclosed genset dimensions*

Genset Model Rating (kVA) Length (mm) Width (mm) Height (mm)
C 75 D5 P / C 82.5 D5 P 75 kVA / 82.5 kVA 3850 1150 1700
C 100 D5 P 100 kVA 4000 1150 1700
C 125 D5 P 125 kVA 4000 1150 1700
C 140 D5 P 140 kVA 4000 1150 1700

Typical diesel genset dimensions

Genset Model Rating (kVA) Length (mm) Width (mm) Height (mm) Weight (kgs.) (Dry)
C 75 D5 P / C 82.5 D5 P 75 kVA / 82.5 kVA 2100 950 1420 1250
C 100 D5 P 100 kVA 2230 950 1430 1350
C 125 D5 P 125 kVA 2230 950 1430 1350
C 140 D5 P 140 kVA 2350 950 1450 1400

Cummins Power Generation Offices:

Location: Tel: Fax: Location: Tel: Fax:
Bangalore: (080) 2361 3831/ 2361 1958 (080) 2361 4552 Jaipur: (0141) 236 4944 (0141) 236 3746
Chennai: 098400 88717/ 098402 07633 (044) 2491 1120 Kolkota: (033) 2287 8065/ 2247 2481 (033) 2290 3839
Delhi: Telefax: (011) 4161 8357/ 61 Lucknow: (0522) 278 6718/ 278 7514 (0522) 278 7880
Hyderabad: (040) 2766 3017 (040) 2767 8892 Mohali: (0172) 224 0373 (0172) 224 0371/ 72
Indore: (0731) 645 1042 Mumbai: (022) 2756 6351/ 52/ 53/ 54 (022) 27566355
Vadodara: (0265) 232 4207/ 654 0390 (0265) 234 0623

Cummins India Limited

Power Generation Business Unit Authorised
Representative
35A/1/2, Erandawana,
Pune 411 038. India
Tel.: (91) 020-6602 7525
Fax: (91) 020-6602 8090

www.cumminsindia.com
Our energy working for you.TM
© 2008 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation
and Cummins are registered trademarks of Cummins Inc. PowerCommand is a registered
trademark of Cummins Power Generation Inc. “Our energy working for you.” is a trademark
of Cummins Power Generation.
PGBU/CIL/004/B 75-140 kVA/CPG/90Deg./March 2008/Qty.