This brochure provides a comprehensive overview

of the applications and associated functions

available with Rotork Q actuators - comprising
Q Standard and Q Pak actuators.

The watertight ‘Q’ Range actuators have been designed using

Rotork’s world proven reliability in combination with the latest
technology.
They provide a simple, cost-effective way of controlling small
quarter-turn valves and dampers. Designed to meet industry’s
need for a compact and reliable watertight actuator where an
IP68 (NEMA 6) enclosure is required. The ‘Q’ Range is a single-
phase electric actuator which is available in two versions, both
with the Rotork ‘double-sealed’ IP68 enclosure.
The Q-standard version is suitable for simple open/close duties
where on/off control is required. This is achieved without
the need for reversing contactors, giving simplified wiring.
The designs of the motor and limit switch mechanism ensure
combined ease of setting and reliability in use.
The Q-pak version benefits from the addition of a specially
designed control interface module which enables it to operate
from a wide variety of remote control signals and provides
Q Range
status monitoring outputs. Watertight Single-Phase Electric
Quarter-turn Actuators for
part-turn valves and dampers

Redefining Flow Control

Performance Summary
Mechanical Data

Electrical Torque† Mounting base designation to Maximum stem acceptance

Supply 90º Travel time (sec)
Model Nm (lbsft) ISO5211 (imperial) mm (ins)
(Volts) 50 Hz 60 Hz Standard Optional Bore/Keyway A/F Square

135 F05 F07 22* 16*

220, 240 27, 18, 9 23, 15, 8
(100) (FA05) (FA07) (13/16*) (5/8*)
Q100
135 F05 F07 22* 16*
110, 115, 120 27, 18, 9 23, 15, 8
(100) (FA05) (FA07) ( /16*)
13
(5/8*)

406 F10 F07 42** 30**

220, 240 54, 36, 18 45, 30, 15
(300) (FA10) (FA07) (1 /8)
5
(11/8)
Q300
406 F10 F07 42** 30**
110, 115, 120 54, 36, 18 45, 30, 15
(300) (FA10) (FA07) (1 /8)
5
(11/8**)

Q100/Q300 handwheel turns: 15

† Torque rating is maximum torque. Switch setting is in both directions.
Torque output is adjustable from 30% to 100% of rated torque
Drive sleeves are normally supplied blank for machining by valve supplier
* Maximum stem acceptance for both Q100 F05/FA05 and F07/FA07 bases
** These dimensions apply to F10/FA10 base. With Q300 F07/FA07 base,
max. acceptance is 28 mm bore or 20 mm A/F square hole.

Electrical Data

Electrical
Supply Travel time (sec) Starting Current Run Current Nominal
Model Power Factor
(Amps) (Amps) (kW)
(Volts) 50 Hz 60 Hz
27 23 2.7 2.6 0.07 0.99

110, 115, 120 18 15 3.2 2.3 0.10 0.97

Q100 9 8 7.0 4.9 0.21 0.90

27 23 1.35 1.3 0.07 0.99

220, 240 18 15 1.65 1.2 0.10 0.95

9 8 3.6 2.6 0.21 0.90

54 45 2.5 1.8 0.08 0.98

110, 115, 120 36 30 6.0 3.1 0.14 0.95

18 15 8.6 5.3 0.27 0.90

Q300
54 45 1.4 1.0 0.08 0.98

220, 240 36 30 2.9 1.6 0.14 0.95

18 15 4.7 2.6 0.27 0.90

Motor poles 6 4 2

Redefining Flow Control

Q Standard Specification
Enclosure Gearing
Watertight to IEC529, IP68 (suitable for submersion under 3 Double reduction worm and wheel with steel worm and
metres head of water for 48 hours) NEMA 4 and 6. Even when aluminium bronze worm wheel. The second stage worm and
the terminal cover is removed, the electrical compartment is wheel is self locking to ensure that the output cannot be back
protected to a level of IP67 from ingress of dirt and moisture. driven by valve reaction forces.

Temperature Switches
The ‘Q’ Range has been designed for use in ambient Torque-limit and auxiliary limit switches are provided as
temperatures from -30 to +70 ºC. detailed below and have the following electrical ratings on
inductive loads:
Vibration
110/240 VAC 15 A
The actuator can withstand plant induced vibration of 0.5g 110 VDC 0.25 A
over a frequency range of 10 to 200 Hz and seismic vibration 50 VDC 2.5 A
of 1g in a frequency range of 0.2 to 33 Hz. Structural integrity 24 VDC 3 A
is maintained with a seismic vibration of up to 6g.

Performance
Output torque available from 30 lbs.ft (40 Nm).

Power Supply
The ‘Q’ Range of actuators is available as standard for use on
the following single phase electrical supplies:
50 Hz-110 V, 220 V, 240 V
60 Hz-110 V, 115 V, 120 V, 127 V, 220 V and 240 V.
Other voltages can be supplied to special order. A tolerance of
±10% applies to the above voltages. The motor is S2 rated for
a 20% duty cycle according to IEC 34.2. Torque switch setting

Torque-Limit Switches
Construction
One each for open and close ends of travel with normally
The gearcase and all housings are diecast aluminium to
closed contacts. Torque measurement is derived from the
BS1490. The main gearcase and motor housings are to grade
self locking output worm and wheel gearing, which avoids
LM4 with the remainder being LM24.
torque switch reset on the de-energization of the motor and its
associated ‘hammering’ phenomenon.

Local control selectors

Auxilliary limit switch setting

Output Drive Auxilliary Limit Switches

Easily removable blank, steel drive bush suitable for machining One auxiliary limit switch with a change over contact is
by customer to suit valve stem. provided for each direction of travel.
 Q Pak Specification
Motor The Q-pak comprises all the features of the Q-standard, as
described above, with the addition of the control interface
A single-phase squirrel cage capacitor run, class F insulated
module.
induction motor is fitted. The motor is protected from
overload by a thermostat.

Local Indication
A mechanical, continuous position indicator is provided
on the electrical compartment cover.

Mounting
All flange mountings are in accordance with ISO5211.
As an alternative, they are available with UNC thread
holes. See page 2.

Manual Operation
A handwheel is provided for manual operation, which Control interface module
is engaged by a padlockable hand/auto selection lever
Control Interface Module
arranged for power preference. When engaged, the
handwheel drives the second wormshaft. At no time can This module incorporates a deep cover which houses a
the handwheel be driven by the motor. printed circuit board with logic circuits, control switches
and a transformer. The cover carries open/close and local/
stop/remote selectors. The logic circuits allow either
internally or externally fed remote controls. Other facilities
include: motor running indication, monitor relay and
emergency shut down (ESD) facility.

Q-Pak - Optional Extras

With the addition of Rotork manufactured cards the Q Pak
actuator options include:
• Folomatic proportional control
• Internally powered Current Position Transmitter

Mechanical stop adjustment • Bus Control Systems

Mechanical Stops Bus Control Systems

Externally adjustable mechanical stops are provided with
The Rotork Pakscan system is capable of controlling
a setting range of 80º to 100º of output movement. The
and monitoring up to 240 field devices (actuators or
setting of these provides travel limitation for both electrical
other devices) using a master station connected by serial
and manual operation.
or ethernet to a DCS. A local HMI, which has a full
colour integral display, shows the status of all the field
Conduit Entries
devices, the current state of the communications ports,
Two off M32 or two off 1 inch ASA NPT. system alarms and diagnostic information, plus actuator
control and set up facilities. Remote access to the asset
Q-Standard – Optional Extras management features are available via the built in web
pages as well as the status, diagnostic, set up and control
Two auxiliary limit switches each independently adjustable
facilities provided by the local HMI.
to any pointing of valve travel.
12 watt anti-condensation heater to suit motor supply
voltage. Integrally mounted open/close and local/stop/
remote selectors. In addition to being fully compatible with Rotork Pakscan,
1 watt potentiometer for remote valve position indication. the Q Pak actuators can be seamlessly integrated into
Externally powered 4-20 mA Current Position Transmitter many other fieldbus digital control systems, such as
(CPT). Profibus, Foundation Fieldbus, DeviceNet and Modbus.
A4

US

Inside the Q Range Actuator

Features
• Reliability of single-phase squirrel cage motors.
• Simple remote control for basic applications.
• Rugged compact double-sealed watertight enclosure
providing environmental protection during plant
construction and cabling.
• Positive travel limitation by externally adjustable
mechanical stops.
• Simple action auxiliary switch setting.
• Declutchable handwheel with padlockable hand/auto
selector arranged for power preference.
• Self locking electrical and manual drive.
• Q-pak version gives compatibility with standard
Rotork control and monitoring configurations.

US

A4
 Q Range
Watertight Single-Phase Electric Quarter-turn
Actuators for part-turn valves and dampers

A full listing of our worldwide UK

Rotork plc Electric Actuators and Control Systems
sales and service network is tel
fax
+44 (0)1225 733200
+44 (0)1225 333467
available on our website. email mail@rotork.com Fluid Power Actuators and Control Systems

USA
Rotork Controls Inc. Gearboxes and Gear Operators
tel +1 (585) 247 2304

www.rotork.com fax
email
+1 (585) 247 2308
info@rotork.com Projects, Services and Retrofit

Formerly E610E. As part of a process of on-going product development, Rotork reserves the
right to amend and change specifications without prior notice. Published data may be subject to
change. For the very latest version release, visit our website at www.rotork.com
PUB007-001-00
The name Rotork is a registered trademark. Rotork recognises all registered trademarks.
Issue 01/12 Published and produced in the UK by Rotork Controls Limited. POWSH0112