Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
86 views

For Hilti Anchor Design, Following Data Is Required

1. The document provides requirements for designing Hilti anchors, including concrete grade, orientation, dimensions, loads, moments, and factor of safety. 2. Data is requested for two concrete wall anchors, including a 200mm thick core wall with 105kN tension load and 58kN torsion load, and a 200mm wide core wall with 240kN shear load. 3. Additional details of the base plate are requested, including length, width, anchor spacing, minimum concrete depth, and existing bolt diameter.

Uploaded by

sonofalexander
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
86 views

For Hilti Anchor Design, Following Data Is Required

1. The document provides requirements for designing Hilti anchors, including concrete grade, orientation, dimensions, loads, moments, and factor of safety. 2. Data is requested for two concrete wall anchors, including a 200mm thick core wall with 105kN tension load and 58kN torsion load, and a 200mm wide core wall with 240kN shear load. 3. Additional details of the base plate are requested, including length, width, anchor spacing, minimum concrete depth, and existing bolt diameter.

Uploaded by

sonofalexander
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

FOR HILTI ANCHOR DESIGN, FOLLOWING DATA IS REQUIRED

For Anchor Design


Concrete Load (kN) Moment (kN-m)
Sr. Concrete Concrete Orientation Dimension Shear Shear
Tension(Axial) FoS
No. Grade (Column/Beam/Slab) (face is Z(along X(along Torsion Z Bending X Bending Y
underlined) Y
C2) C1)
CORE WALL 200mm THK
WALL & 16
1 60 105 36 58 0 18 1.5
DEFNITE
LENGTH
CORE WALL 200mm 1.5
2 60 200mm wide 0 0 240 0 0 0
WIDE

In addition to the above data pl. supply us with the following details of the base plate (if already decided):
L Application Diagram:
L: Length of the base plate= ---300------- mm----
Kindly provideB:the actual
Width of concrete dimension
the base plate= and hand
----600------ sketch.
mm------
C1 C1 & C2: spacing between the anchor= --150---- mm-----/------mm
B
Concrete dimension not----36-
Hole dia= available. Please
---------- provide minimum concrete depth required.
mm----
Existing bolt dia= ---------34------(to be checked for suitability)
(All dimensions in mm.)
C2
#Pl consider local axis for data inputs.
Name of the consultancy Firm:

Name of the Project:


Target Customer:
Name of the person responsible at site
Phone Number:

You might also like