Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 56 views

    Design of Moment Connection Extended End Plate Moment Connection - Eight Bolts Type

    Uploaded by

    MazenMowafy
    This document provides design calculations for an extended end plate moment connection between a beam and column. It includes dimensions of the beam and column sections, straining actions, material properties, and calculations to check the required number and size of bolts, weld sizes, end plate thickness, and stiffener requirements for the column. The calculations are based on specifications from AISC and AWS.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Design of Moment Connection Extended End Plate Moment Connection - Eight Bolts Type

    Uploaded by

    MazenMowafy
    56 views2 pages
    This document provides design calculations for an extended end plate moment connection between a beam and column. It includes dimensions of the beam and column sections, straining actions, material properties, and calculations to check the required number and size of bolts, weld sizes, end plate thickness, and stiffener requirements for the column. The calculations are based on specifications from AISC and AWS.

    Original Title

    M-E-CO

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides design calculations for an extended end plate moment connection between a beam and column. It includes dimensions of the beam and column sections, straining actions, material properties, and calculations to check the required number and size of bolts, weld sizes, end plate thickness, and stiffener requirements for the column. The calculations are based on specifications from AISC and AWS.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    56 views2 pages

    Design of Moment Connection Extended End Plate Moment Connection - Eight Bolts Type

    Uploaded by

    MazenMowafy
    This document provides design calculations for an extended end plate moment connection between a beam and column. It includes dimensions of the beam and column sections, straining actions, material properties, and calculations to check the required number and size of bolts, weld sizes, end plate thickness, and stiffener requirements for the column. The calculations are based on specifications from AISC and AWS.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 2

    Extended H. Plate Mom. Conn.

    DAR AL-HANDASAH DESIGN OF MOMENT CONNECTION


    SHAIR&PARTNERS Extended End Plate Moment Connection - Eight bolts Type
    Project Prepared by Dr.Hany El-Rashidy/Eng.Walaa El-Mohan Computed by
    Building Checked by
    Subject Approved by

    Reference AISC - ASD 9th edition


    Section Dimensions Extended End Plate Momen

    BEAM H (Total) (cm) t (web) (cm) B (fl.) (cm) t (fl.) (cm)

    COLUMN H (Total) (cm) t (web) (cm) B (fl.) (cm) t (fl.) (cm) r(fillet) (cm)

    Straining Actions

    Moment (m.t) Shear (t.) Tension (t.)

    Normal Grade ASTM A36

    FY= 2.45 t/cm2

    Check No. and Diameter of Bolts:

    Ft= M/(d-tf)
    = #DIV/0! ton
    T/bolt = Ft/6
    = #DIV/0! ton
    V / total no. = V/16
    = 0.00 ton

    MAX.TENSION FORCE/BOLT= #DIV/0! ton


    MAX.SHEAR FORCE/BOLT= 0.00 ton
    db(bolt diameter)= 3.6 cm
    USE BOLTS = M36 Grade (10.9) - DIN 6914 - No Torque Tightened Grade (8.8) - DIN 6914
    F all.ten. (No Torque T.) = 33.50 ton Grade (10.9) - DIN 6914
    F all.ten. (With Torque T) = 35.70 ton
    F all.shear = 20.40 ton ###
    M16
    U.C due to tension = #DIV/0! #DIV/0! M20
    U.C due to shear = 0.00 < 1 (safe) M22
    M24
    Weld Size of Beam Flange to H. Plate: AWS Table 4.1.1

    Allowable weld stress M30


    Electrode specificatio E70XX M36
    Tensile strength = 3.48 t/cm2
    = .3*nominal tensile strength of weld metal AISC - ASD
    = 1.04 t/cm2 Table J2.5
    = .4*yield stress of base metal
    = 0.98 t/cm2
    f all. = 0.98 t/cm2
    Sw fillet = Ft/((2*(bf+tf)-tw)*f all.)

    530296502.xls - Rev 0 1/2 07/02/2021


    Extended H. Plate Mom. Conn.
    = #DIV/0! cm ###
    Sw(min.)= #DIV/0! mm #DIV/0!
    E70XX
    E60XX
    Weld Size of Beam Web to H. Plate: ###

    Sw req. = V/(f all.*(d-2tfb)) = #DIV/0! cm

    Sw(min.)= #DIV/0! mm

    Calculation of End Plate Thickness:

    bp = Max. effective width in design = Bf + 1``


    = 2.54 cm
    Pf= 0 cm
    g= 0 cm
    pb=3dp= 10.8
    Ma= T*Pf
    Ma= #DIV/0! cm.t
    Ca = Constant depending on the yield stress of the beam
    = 1.13
    Cb= (bfb/bp)^0.5
    = 0.00
    Af/Aw = #DIV/0!
    αm Ca*Cb*(Af/Aw)^1/3*(Pe/dp)^1/4
    C.F=Correction Factor
    C.F= SQRT(((g^2+Pf^2 )^0.5)/(5*2.54))
    C.F= 1
    Required Plate Thickness
    tp= ((6*Ma)/(0.75*Fy*bp))^0.5*C.F
    = #DIV/0! cm

    tp(min.)= #DIV/0! mm

    Columns Stiffeners:

    1- Check column web yielding


    k= 0.00 cm
    Pbf= 5/3*flange foce
    = #DIV/0! ton
    Pbf (allow)= Fyc*twc*(tfb+6K+2tp+2w) AISC - ASD
    = #DIV/0! ton #DIV/0! K1 - 1
    #DIV/0!

    2- Check Column Web Buckling


    Pbf (allow)= 4100*twc^3*SQRT(Fy)/dc
    = #DIV/0! kips
    = #DIV/0! ton #DIV/0! AISC - ASD
    #DIV/0! K1 - 8

    3- Check Column Flange Bending


    bp= tflb+2pf+3.5pb
    bp= 37.8 cm

    k1= 0.00 cm K1

    COLUMN
    Pec= (g/2)-k1-(db/4)
    = -0.90 cm
    Ca= 1.13
    Cb= 1 K

    Af/Aw= #DIV/0!
    αm = Ca*Cb*(Af/Aw)^1/3*(Pe/dp)^1/4
    = #DIV/0!
    Me= α m *Ft *Pe/4
    = #DIV/0! cm.t.
    Required tfc= ((6*Me)/(Fy*bp))^.5
    = #DIV/0! cm #DIV/0!
    #DIV/0!

    530296502.xls - Rev 0 2/2 07/02/2021

    You might also like