3c841 Bumi Unit 1

QUALITY ASSURANCE DATA BOOK
BUMI ARMADA
BUMI, PD# 3C841

Package Serial Number TG08988
2 EACH - TAURUS 70 GAS TURBINE DRIVEN GENERATOR SET
Unit Number 1
Solar Turbines
A Caterpillar Company
Solar Turbines
FOREWORD
This technical manual contains manufacturing records and quality/test documentation for Gas Turbine Driven equipment
designed and manufactured by Solar Turbines Incorporated in San Diego, California.
TECHNICAL MANUAL OVERVIEW
The technical manual is provided in volume sets. The manual contains the approved Inspection and Test Plan, Package
Certificate of Conformance, required records, reports, data sheets and inspection and test reports. Each volume is complete
and described below.
BUMI ARMADA
BUMI, PD# 3C841

2 EACH - TAURUS 70 GAS TURBINE DRIVEN GENERATOR SET
Unit Number 1
Solar Turbines
Proprietary Notice
The contents of this technical data book are proprietary data of Solar Turbines Incorporated, a subsidiary
of Caterpillar Inc. Reproduction or use of any part for other than the operation and maintenance of Solar
equipment is permissible only if expressly authorized in writing by Solar. This software and accompanying
documentation are distributed only in accordance with and subject to the terms of the Solar Turbines
Incorporated Standard Terms and Conditions for the licenses of the software (the "Solar License"). The
software and accompanying documentation are copyrighted property of Solar Turbines Incorporated and
all rights are reserved. You may not copy, modify, transfer, sublicense, rent, lease, convey, translate,
convert to any programming language or format or decompile or disassemble the software or any copy,
modification or merged portion, in whole or part, except as expressly provided in the Solar License. A
violation of the Solar License will be prosecuted to the full extent of all applicable law, including, but not
limited to, United States Copyright, patent and trademark laws and regulations. Solar, Saturn, Centaur,
Mars, Mercury, Taurus, Titan, SoLoNOx, and Turbotronic are trademarks of Solar Turbines Incorporated.
Cat and Caterpillar are trademarks of Caterpillar Inc. Specifications are subject to change without notice.
Solar Turbines
The Table of Contents items for this project correspond to the ITP item numbers identified within each section of the
ITP (Inspection and Test Plan). These items are identified with an "X" in column A of the project ITP. A copy of the
Project ITP is supplied in the last section for reference.
BUMI, PD # 3C841
Table of Contents
ITEM
NUMBER
01.06 LUBE OIL COOLER

1. Pressure Test And Flush Certificate

2. Electrical Device List

3. Electrical Device Certificates

4. Abs Certificate
01.07 LUBE OIL FILTERS

Asme Data Report
01.08 GENERATOR
1. Factory Acceptance Test
01.08 GENERATOR
01.08 GENERATOR
01.08 GENERATOR
4. Abs Certificate
BUMI, PD # 3C841
Table of Contents, Continued
ITEM
NUMBER
01.11 COUPLING
Balance Data Report
01.12 PACKAGE LIFTING KIT

1. Proof Load Test Records
01.12 PACKAGE LIFTING KIT

2. Abs Certificate
01.13 INTERNAL EQUIPMENT HANDLING SYSTEM

1. Proof Load Test Records
01.13 INTERNAL EQUIPMENT HANDLING SYSTEM

2. Abs Certificate
02.01 REVIEW WELDING PROCEDURES

Pqr, Wps
02.02 REVIEW WELDER QUALIFICATIONS

Wqr
02.03 SKID FABRICATION

Traveler
02.04 LUBE OIL TANK - PNEUMATIC LEAK TEST

Traveler
02.05 SKID SURFACE PREPARATION AND PAINT

Turbofab Form 3016
02.06 LUBE OIL TANK - INTERNAL COATING

Traveler
BUMI, PD # 3C841
ITEM
NUMBER
03.05 MANIFOLD RADIOGRAPHY

1. X-ray Report
03.06 HYDROSTATIC PRESSURE TEST OF MANIFOLDS

Hydro Test Log
04.01 VISUAL INSPECTION OF CONTROL CONSOLE WIRING

Control Console Hardware Sheet In 04.02
04.02 CONTROL SYSTEM HARDWARE VERIFICATION

Control Console Hardware Sheet
04.03 CONTROL SYSTEM SOFTWARE VERIFICATION

Control Software Verification Sheet
05.03.A COMPRESSOR CASE LEAK TEST

Leak Test Chart
05.03.B COMBUSTOR CASE LEAK TEST

Leak Test Chart
05.03.C ENGINE FUEL MANIFOLD HYDROSTATIC TEST

1. Hydrostatic Test Chart
05.03.C ENGINE FUEL MANIFOLD HYDROSTATIC TEST

2. X-ray Report
05.04 ROTOR ASSEMBLY - COMPRESSOR AND TURBINE

Solar Certificate Of Compliance
05.04.A GAS PRODUCER COMPRESSOR ROTOR

Inspection Data
BUMI, PD # 3C841
ITEM
NUMBER
05.04.B GAS PRODUCER TURBINE ROTOR

Inspection Data
05.04.D BALANCE GAS PRODUCER COMPRESSOR ROTOR

Inspection Data
05.04.E BALANCE GAS PRODUCER TURBINE ROTOR

Inspection Data
05.06 GEAR BOX

Inspection Data
05.07 ENGINE PERFORMANCE TEST

Engine Test Report
06.00 THIS SECTION DOES NOT APPLY

No Documents Required
07.05 DIMENSIONAL CHECK

Qc Folder Dimensional Verification Sheet
08.01 PACKAGE/CONSOLE ACCEPTANCE TEST

Certified Test Report
08.02 ENCLOSURE ASSEMBLY STATIC TEST

Stamp Off Sheet In 08.01
09.00 PACKAGE FINAL INSPECTION

No Documents Required
10.01 QC DATA BOOK REVIEW

1. Package Certificate Of Compliance
BUMI, PD # 3C841
ITEM
NUMBER
10.01 QC DATA BOOK REVIEW

2. Itp (reference Copy)
10.02 ELECTRICAL DEVICE LIST

10.02 ELECTRICAL DEVICE LIST

10.03 QC DATA BOOK REVIEW BY ABS

Package Abs Certificate
SECTION: 01.06
LUBE OIL COOLER
1. PRESSURE TEST AND FLUSH CERTIFICATE

SECTION: 01.06
LUBE OIL COOLER
2. ELECTRICAL DEVICE LIST

Electrical Device List for
SOLAR PN-3C191
Item # Quantity Part Number Manufacturer Material Certificate Code
Description
Z08073000796
Electric Motor 5HP 380/3/50 715RPM 254T FRAME XPFC
1 2 Baldor
Vibration Switch Vibration switch

2 2 5550-311-041 Metrix
NOTES:
1 – Hayden Part Number :041551
2-- Hayden Model TTP-448
S:\QA Data Books\#1 BOOKS OPEN TO WORK\3C841 BUMI\SECTIONS 00 - 10\Section 01 NEED\Hayden\Electrical Device 40670AKM.doc
Page 1
SECTION: 01.06
LUBE OIL COOLER
3. ELECTRICAL DEVICE CERTIFICATES

SECTION: 01.06
LUBE OIL COOLER
4. ABS CERTIFICATE
SECTION: 01.07
LUBE OIL FILTERS
ASME DATA REPORT

FORM U-1A MANUFACTURER'S DATA REPORT FOR PRESSURE VESSELS
(Alternative Form for Single Chamber, Completely Shop or Field Fabricated Vessels Only)
W.O.#
As Required by the Provisions of the ASME Boiler and Pressure Vessel Code Rules, Section VIII, Division 1
1. Manufactured and certified by Filter Specialists, Inc., 2302 S. North Rd., Grand Island, Nebraska, 68803, USA
(Name and address of manufacturer)
2. Manufactured for Hydac, USA
(Name and address of purchaser)
3. Location of Installation Hydac Technology Corp., 2260 City Line Rd., Bethlehem, Pennsylvania, 18017, USA
(Name and address)
Vertical 63910 N/A 1903826 8122 2008

(Horizontal or vertical, tank) (Manufacturer's serial number) (CRN) (Drawing No.) (National Board number) (Year built)
4. Type
5. The chemical and physical properties of all parts meet the requirements of material specifications of the ASME BOILER AND PRESSURE VESSEL
CODE. The design, construction, and workmanship conform to ASME Rules, Section VIII, Division 1 2007 to 2007
N/A N/A (year) [Addenda (Date)]
(Code Case numbers) (Special Service per UG-120(d))
6. Shell: SA-414-G .097 0 8.625" (ID) 2' 3.500"

(Material spec. number, grade (Nominal thickness) (Corr. allow.) (Inner diameter) [Length (overall)]
7. Seams: Type 1 None 65% N/A N/A Type 1 None 65% 1

[Long. (welded, dbl., sngl., lap, butt)] R.T.(Spot or Full) Eff.(%) (H.T. temp) Time (hr) [Girth. (welded, dbl., sngl., lap, butt)] [R.T. (spot or full)] Eff(%) No. of Courses
8. Heads: (a) Material SA-516-70 (b) Material SA-516-70

(Spec. no., grade) (Spec. no., grade)
Location Minimum Corrosion Crown Radius Knuckle Radius Elliptical Ratio Conical Apex Hemispherical Flat Diameter Side to Pressure
(Top, Bottom, Ends) Thickness Allowance Angle Radius (Convex or Concave)
(a) BOTTOM .615 N/A N/A N/A N/A N/A N/A 12.000 N/A
(b) TOP .990 N/A N/A N/A N/A N/A N/A 10.500 N/A
If removable, bolts used (describe other fastenings) SA-193-B7ZN Plate (3) 5/8" - 11 UNC
(Material, spec. number, grade, size, number)
9. MAWP 150 psi N/A at max. temp. 210 °F N/A
(Internal) (External) (Internal) (External)
Min. design metal temp. -20 °F at 150 psi . Hydro, pneu., or comb. test pressure 195 psi
10. Nozzles, inspection and safety valve openings:
Purpose (Inlet, Outlet, Diameter or Nominal How

Number Type Material Reinforcement Material Location
Drain) Size Thickness Attached
Inlet 1 2" Pipe SA-106-B Sch. 40 None UW16.1(c) Side
Outlet 1 2" Pipe SA-106-B Sch. 40 None UW16.1 (c) Side
Vent 1 SAE 4 Cplg SA-106-B 3000# None UW16.1(c) Top
Gage 2 SAE 12 Cplg SA-106-B 3000# None UW16.1(a) Side
Gage 1 SAE 6 Cplg SA-106-B 3000# None UW16.1(a) Side
11. Supports: Skirt No Lugs No Legs No Other N/A Attached N/A

(Yes or no) (Number) (Number) (Describe) (Where and how)
12. Remarks: Manufacturer's Partial Data Reports properly identified and signed by Commissioned Inspectors, have been furnished for the following items of the report:
RFLD1300CAL C.S. Gskt Pn Egr30416VI
(Name of part, item number, Manufacturer's name and identifying stamp)
Exempt from Impact Testing per UG-20(f)
We certify that the statements made in this report are correct and that all details of design, material, construction, and workmanship of this vessel conform to the ASME BOILER
CERTIFICATE OF SHOP/FIELD COMPLIANCE
AND PRESSURE VESSEL CODE, Section VIII, Division 1. "U" Certificate of Authorization No. 19403 expires 08/26/2008
Date 02/28/2008 Co. name Filter Specialists, Inc. Signed
(Manufacturer) (Representative)
CERTIFICATE OF SHOP/FIELD INSPECTION
Vessel constructed by Filter Specialists, Inc. at 2302 S. North Rd., Grand Island, Nebraska, 68803, USA I, the
undersigned, holding a valid commission issued by The National Board of Boiler and Pressure Vessel Inspectors and/or the State or Province NE
of employed by HSB CT of Lisle, IL
and have inspected the component described in this Manufacturer's Data Report on
February 28, 2008 and state that, to the best of my knowledge and belief, the Manufacturer has constructed this pressure vessel in accordance with ASME BOILER AND
PRESSURE VESSEL CODE, Section VIII, Division 1. By signing this certificate neither the Inspector nor his/her employer makes any warranty, expressed or implied, concerning
the pressure vessel described in this Manufacturer's Data Report. Furthermore, neither the Inspector nor his/her employer shall be liable in any manner for any personal injury or
property damage or a loss of any kind arising from or connected with this inspection.
Date 02/28/2008 Signed Commissions 12834A, NE10179

(Authorized Inspector) (National Board (incl. endorsements), State, Province and number)
787702 exe: v4.2.9 U1A-15
SECTION: 01.08
GENERATOR
1. FACTORY ACCEPTANCE TEST

SECTION: 01.08
GENERATOR

SEE DEVICE LIST AND
CERTIFICATES IN ITEM 10.02
SECTION: 01.08
GENERATOR

SEE DEVICE LIST AND
CERTIFICATES IN ITEM 10.02
SECTION: 01.08
GENERATOR
4. ABS CERTIFICATE
SECTION: 01.11
COUPLING
BALANCE DATA REPORT

SECTION: 01.12
PACKAGE LIFTING KIT
1. PROOF LOAD TEST RECORDS

SECTION: 01.12
PACKAGE LIFTING KIT
2. ABS CERTIFICATE
SECTION: 01.13
INTERNAL EQUIPMENT HANDLING SYSTEM
1. PROOF LOAD TEST RECORDS

SECTION: 01.13
INTERNAL EQUIPMENT HANDLING SYSTEM
2. ABS CERTIFICATE
SECTION: 02.01
REVIEW WELDING PROCEDURES
PQR, WPS
SECTION: 02.02
REVIEW WELDER QUALIFICATIONS
WQR
SECTION: 02.03
SKID FABRICATION
TRAVELER
SECTION: 02.04
LUBE OIL TANK - PNEUMATIC LEAK TEST
TRAVELER
SEE TRAVELER IN ITEM 02.03
SECTION: 02.05
SKID SURFACE PREPARATION AND PAINT
TURBOFAB FORM 3016

SECTION: 02.06
LUBE OIL TANK - INTERNAL COATING
TRAVELER
SEE TRAVELER IN ITEM 02.03
SECTION: 03.05
MANIFOLD RADIOGRAPHY
1. X-RAY REPORT
SECTION: 03.06
HYDROSTATIC PRESSURE TEST OF MANIFOLDS
HYDRO TEST LOG

HYDRO LOG
Item # Serial # Customer PD Pressure Date Tester Badge
#
1069672-9300 8636-12 BUMI 2-3C841 350 7/15/08 28902
1066321-9300 8637-6 BUMI 2-3C841 150 7/16/08 28902
1069134-300 8638-14 BUMI 2-3C841 225 7/17/08 28902
1069134-300 8638-12 BUMI 2-3C841 225 7/17/08 28902
1055020-300 8641-03 BUMI 2-3C841 225 7/24/08 28902
1057658-300 8645-7 BUMI 2-3C841 150 7/24/08 28902
107991-300 8646-13 BUMI 2-3C841 225 7/25/08 28902
1080347-300 8646-15 BUMI 2-3C841 225 7/25/08 28902
1080346-300 8645-6 BUMI 2-3C841 225 7/25/08 28902
1054999-301 8646-7 BUMI 2-3C841 225 7/28/08 28902
1044677-300 8645-8 BUMI 2-3C841 225 7/28/08 28902
1061056-9300 8644-10 BUMI 2-3C841 600 7/31/08 23120
1066394-9300 8644-11 BUMI 2-3C841 600 7/29/08 28902
1079990-300 8645-16 BUMI 2-3C841 225 7/29/08 28902
1079994-300 8645-15 BUMI 2-3C841 225 7/29/08 28902
1079989-300 8646-12 BUMI 2-3C841 225 7/29/08 28902
1069465-300 8646-9 BUMI 2-3C841 225 7/29/08 28902
1066390-300 8646-10 BUMI 2-3C841 225 7/31/08 23120
1067761-300 8646-14 BUMI 2-3C841 225 7/31/08 23120
1066388-300 8646-11 BUMI 2-3C841 225 7/31/08 23120
1055020-300 8653-07 BUMI 2-3C841 225 8/2/08 28902
1044677-300 8653-09 BUMI 2-3C841 225 8/2/08 28902
1080347-300 8652-15 BUMI 2-3C841 225 8/2/08 28902
1079991-300 8652-16 BUMI 2-3C841 225 8/2/08 28902
1080346-300 8653-08 BUMI 2-3C841 225 8/4/08 28902
1069465-300 8653-34 BUMI 2-3C841 225 8/4/08 36068
1079989-300 8652-22 BUMI 2-3C841 225 8/5/08 28902
1054999-301 8652-1 BUMI 2-3C841 225 8/5/08 28902
1066394-9300 8651-10 BUMI 2-3C841 600 8/6/08 28902
1067761-300 8652-14 BUMI 2-3C841 225 8/6/08 28902
1066388-300 8652-18 BUMI 2-3C841 225 8/6/08 28902
1066390-300 8652-19 BUMI 2-3C841 225 8/6/08 28902
1061056-9300 8651-18 BUMI 2-3C841 600 8/7/08 45711
1079994-300 8652-17 BUMI 2-3C841 225 8/7/08 36068
1079990-300 8652-21 BUMI 2-3C841 225 8/7/08 24890
1069102-301 8640-7 BUMI 2-3C841 225 8/12/08 28902
1069102-301 8638-10 BUMI 2-3C841 225 8/19/08 28902
1056177-9300 8669-1 BUMI 2-3C841 225 8/27/08 28902
1056177-9300 8669-2 BUMI 2-3C841 225 8/27/08 28902
SECTION: 04.01
VISUAL INSPECTION OF CONTROL CONSOLE WIRING
CONTROL CONSOLE HARDWARE SHEET IN 04.02

SECTION: 04.02
CONTROL SYSTEM HARDWARE VERIFICATION
CONTROL CONSOLE HARDWARE SHEET

Solar Turbines
A Caterpillar Company CONTROL CONSOLE Customer Witness 11/14/2008
Project: 2-3C841 Customer: BUMI Unit 1 of 2
LANGUAGE: English ON-SKID/OFF-SKID CONTROL: OFF-SKID

TE: Fred Barnes
OP Title Purpose of the operation Stamp
5 Console Wiring and This test is to insure that the console legal packet is complete,
Shortages and that the console components and wiring are in
accordance with the legal wiring diagram and Layout.
7 Switch and Jumper Verify that the switches and jumpers are set in accordance
Settings with the electrical schematic.
8 Horn/Hour Meter/Start To disable the alarm horn, hour meter, and start counter
Counter Disconnect during test.
10 Connect External DC To verify that the grounds are isolated from each other, there
Power are no "short" circuits and that each circuit breaker powers its
circuit/bus only per the electrical print.
12 Load Controller Software Connect the programming terminal (PC) to the controller and
load the project application software.
19 Load Display Program Load the display software into the control console display
(TT4000) terminal/computer.
21 PLC LED's All Green Verify no communication error exists between the Controller
and the display.
22 Clear All Malfunctions To lock-up the backup relay system.
23 I/O Overview Configuration Verify that the I/O configuration is complete and correctly set
Verification up using the electrical schematic – vs. – the Controller.
24 Communication Error To verify the correct alarm and/or shutdown functionality

associated with ControlNet communication errors for units
with ACN or ACNR modules.
Solar Turbines

TE: Fred Barnes
25 Preliminary for I/O To create a reduced copy of the electrical schematic, and
hardware Checks provide information on how to perform a cross reference.
25A Discrete Inputs To verify that all Discrete Input I/O channels are functioning
properly in accordance with the legal electrical schematic
diagram.
25B Discrete Outputs To verify that all Discrete Output I/O channels are functioning
diagram.
25C Frequency Inputs To verify that all Frequency Input I/O channels are functioning
diagram.
25D Thermocouple / Milli-volt To verify that all Thermocouple / Milli-volt Input I/O channels
Inputs are functioning properly in accordance with the legal electrical
schematic diagram.
25E Analog Inputs To verify that all Analog Input I/O channels are functioning
diagram.
25F Analog Outputs To verify that all Analog Output I/O channels are functioning
diagram.
25H RTD Inputs To verify that all RTD Input I/O channels are functioning
diagram.
27 Vibration Setup To verify the vibration system wiring from the vibration
modules to the end of the line.
28 Vibration Channel Fault To verify module fault alarm annunciation associated with the
Monitor Vibration Monitor.
Solar Turbines

TE: Fred Barnes
30 Vibration - Accelerometer To verify the accuracy of the input for accelerometer vibration
channels.
31 Vibration - Displacement To verify the accuracy of the input for displacement vibration
channels.
32 Vibration - Thrust / Axial To verify the accuracy of the input for displacement vibration
channels.
49 Lamp Test To verify the lamps on the turbine control panel are
operational.
69 Controller Powerup To verify that the I/O modules communicate properly and a
fast stop shutdown occurs on initial Controller power up.
88 Ventilation Fail To verify an ESD shutdown occurs whenever engine is running or

there is a lube oil requirement and the ventilation flow is not on. To
also verify that in the event of a fire, that the ventilation is
commanded off.
90 Backup System Fast Stop Ensure that the backup system will de-energize the starter, fuel
valves, bleed valve, guide vane and any other device specified by
the legal electrical schematic, independently of the Controller.
91 Relay Backup - Fire Signal Verify that in the event of a fire and a Controller failure, the
Control backup system activates the pre/post lube oil pump while the
roll down timer is timing.
92 Backup System Lube Verify that in the event of a Controller failure, the backup
Pump Control system will control the lube oil pumps for the duration of the
total post lube timer.
93 Watchdog Timer Verify that in the watchdog timer causes a backup system
active in case of Controller failure.
Solar Turbines

TE: Fred Barnes
200 A/C Preliminary To modify software to enable the CGCM’s functions.
201 A/C Visual Inspection To verify the correct selection of the A/C meters and their
proper wiring.
202 A/C Simulator Hookup To provide a consistent and logical method for connecting the
A/C simulator.
203 CGCM Module Verification To verify that the CGCM is installed and functions properly.
204 A/C Metering Accuracy To verify the accuracy of the AC meters and the CRT
displayed AC parameters.
205 Gen Control Screen To verify display soft button functionality.

Verification
206 A/C Generator Control To verify statically the circuitry and operation of the CGCM
voltage regulator.
208 A/C Single Unit Auto Sync To verify the unit will automatically synchronize with a live Bus.
(Hot Bus)
209 A/C Single Unit Auto Sync The purpose of this operation is to verify statically that the
(Dead Bus) control console is tuned to automatically synchronize to a
dead bus.
157 Serial Number Record To record the serial numbers of specified components.
Solar Turbines

TE: Fred Barnes
158 Set Console Timers To verify that all electrical timers are set per the legal drawing
and torque painted.
159 Post Test Visual The purpose of this operation is to compare the wiring of the
Inspection controls with the legal electrical drawing, log any
discrepancies discovered, and take the necessary corrective
action.
160 Final I/O Check To verify if new I/O modules or channels were added and
perform a hardware check on them.
161 Clear Open Discrepancies To verify all operations have been performed and the
Automated Test Log (ATL) is reviewed.
162 Legal Drawings Clear To verify all changes shown on the legal electrical drawing
have been performed and all pencil markings have been
removed.
164 Test Complete and To obtain authorization from test engineer to disconnect the
Authorized for Disconnect turbine controls and verify all test equipment and accessories
are disconnected.
SECTION: 04.03
CONTROL SYSTEM SOFTWARE VERIFICATION
CONTROL SOFTWARE VERIFICATION SHEET

Solar Turbines
A Caterpillar Company TURBOTRONIC 4 SOFTWARE QUALIFICATION Date 8/13/2008
Project: 3C841 Customer: Bumi Armada

Operation Title Purpose of the operation
Composite 149453_211
Project 100 Project Test To perform a number of automated diagnostic checks on the project
software.
TE39
Project 105 Generate Test Reports To create all reports required for testing.
TE39
Project 110 Address Check and Scaling, To ensure addresses in the electrical schematic match those in the
Controller vs. Prints controller; to verify transmitter scaling in electrical schematic and hydro-
TE39
mechanical drawings match that in the controller.
Project 120 I/O Configuration for Sales- To verify the I/O module configuration is complete and correctly set for
Order Modules sales-order added modules.
TE39
Project 130 Sales Order Constants To verify the software constants are set correctly for the sales order
requirements.
TE39
Project 140 Review Project Creation Notes To verify issues listed in the Project Creation Notes have been properly
addressed by the DE.
TE39
Ancillary 020 Turbine Air Inlet Filter To verify the proper monitoring of the turbine air inlet filter transmitter.
Transmitter Monitoring TE39
Ancillary 200 Battery Charger Monitoring To verify the battery charger fail normally closed switch contact is
monitored for fault indication with alarm annunciation. The turbine is
TE39
shut down if the battery charger is faulted over an hour. The control 24
Vdc input is also monitored for low and high voltage conditions.
Ancillary 300 Provides control of on-crank To verify the control of the On-crank water wash valve and the status
water wash system indication that On-crank wash is active.
TE39
Ancillary 310 Provides control of on-line / To verify the control of the On-line water wash valve and the status
running water wash system indication that On-line wash is active.
TE39
Enclosure Enclosure Prestart To verify the prestart enclosure purge logic, where applicable and failure
010 logic for the enclosure fan(s) during this prestart purge will result in a unit
TE39
shutdown.
Enclosure Enclosure Temperature To verify the enclosure temperature measurement device (RTD) input is
020 Monitoring scaled and sent to the HMI. Along with RTD failure check and high
TE39
temperature alarm annunciated when the limits have been exceeded.
Enclosure Enclosure Exhaust Gas Sensor To verify the "Exhaust" combustible gas detection sensor transmitter
030 Monitoring input is scaled and sent to the HMI.
TE39
Caterpillar: Confidential Green 1 of 11

Solar Turbines

Enclosure Enclosure Inlet Gas Sensor To verify the "Inlet" combustible gas detection sensor transmitter input is
040 Monitoring scaled and sent to the HMI.
TE39
Enclosure Prestart Enclosure Exhaust Gas To verify enclosure Inlet Gas Detection Prestart Check While the engine
050 Detection is shut down and when the enclosure purge is almost complete, if the
TE39
exhaust gas sensor detects a high gas level, the unit will not be allowed
to start.
Enclosure Enclosure Door Position Switch To verify that the enclosure door position switch input is monitored.
070 Monitoring Alarm annunciated as required.
TE39
Enclosure Enclosure Ventilation To verify the proper function of vent fan actuation when package devices
075 are on or combustible gas is detected inside the enclosure. Fan
TE39
operation is locked out during a fire.
Enclosure Enclosure Vent Fan Operation To verify the logic of enclosure vent fan actuation when package devices
080 are on or combustible gas is detected inside the enclosure and that the
TE39
fan operation is locked out during a fire. To verify the (optional) fan
failure logic.
Enclosure Enclosure Filter DP Switch To verify that the turbine enclosure vent filter DP high switch input is
120 Monitoring monitored and alarm annunciates as required.
TE39
Enclosure Driven Equipment Enclosure To verify that the driven equipment enclosure vent filter DP high switch
130 Filter DP Switch Monitoring input is monitored and alarm annunciates as required
TE39
Enclosure Enclosure Low Pressure To verify that the enclosure low pressure input is monitored and an alarm
140_CF Monitoring and/or shutdown annunciates as required
TE39
Enclosure QP Configuration To verify the proper configuration of the Quantum Premier upon
170 initialization.
TE39
Enclosure Fire System Monitoring - QP To verify that the fire system inputs are examined and alarms and
180 shutdowns annunciates as required. Verifies auto configuration, Runtime
TE39
data storage and clock sync features.
Enclosure QP Clock Synchronization To verify the proper synchronization of the Quantum Premier clock
190 during either configuration or daily at midnight.
TE39
Enclosure QP Runtime Data To verify the correct Quantum Premier System runtime data.
200 TE39
Exhaust 100 Engine Purge To verify that the exhaust purge time and indication of purge duration
complete, along with indication of purge time remaining for display
TE39
purposes.
Fuel 010 Fuel Inputs - Annunciations To verify the proper annunciations of fuel input failures.
TE39

Solar Turbines

Fuel 015 Fuel Inputs - T1 Temperature To verify the proper scaling of and failure annunciations for the T1
temperature RTD input.
TE39
Fuel 016 T1 Temperature Averaging To verify the proper air inlet temperature signal averaging and filtering.
TE39
Fuel 020 Fuel Inputs - Dual Fuel To verify the proper calculation of the percent load on the turbine based
Generator Sets on the measured real power of the generator, measured T1 temperature,
TE39
and the site altitude.
Fuel 025 Fuel Inputs - Thermocouples To verify the proper scaling of and failure annunciations for the
thermocouples.
TE39
Fuel 040_CF Fuel Select To verify the proper auto and manual user selection of fuel type.
TE39
Fuel 050 Fuel Transfer Sequence To verify the sequencing logic for control of fuel valves during transfer.
TE39
Fuel 060 Gas Fuel Valve Check To verify the checks of gas fuel shutoff valves for shutoff integrity during
start and prior to transfer to gas fuel.
TE39
Fuel 065 Gas Fuel Vent To verify the proper performance of the gas fuel vent sequence.
TE39
Fuel 070 Gas Fuel Valve Control To verify the light off, start, and run sequence for gas fuel.
TE39
Fuel 090 Gas Fuel Pressure To verify the monitoring of gas fuel pressure.
TE39
Fuel 110 Liquid Fuel Purge To verify the control and sequence of the liquid fuel system during start,
purge crank, shutdown , and/or transfer.
TE39
Fuel 116 Liquid Fuel Filter Off-Skid To verify the proper monitoring of the off-skid liquid fuel filter transmitter
DP.
TE39
Fuel 118 Liquid fuel Coalescer Off-Skid To verify the proper monitoring of the off-skid liquid fuel coalescer
transmitter DP and level switch.
TE39
Fuel 120 Liquid Fuel Valve Control To verify the light off, start, and run sequence for liquid fuel.
TE39

Solar Turbines

Fuel 121 AC Main Fuel Pump To verify the proper output command for AC motor driven main liquid fuel
pump.
TE39
Fuel 123 Liquid Manifold PCD Purge To verify the Liquid fuel manifold forward purge for dual fuel
configurations with two forward purge valves.
TE39
Fuel 124 Liquid Divider Block To verify the proper Monitoring of the liquid fuel injectors for posibble
clogging.
TE39
Fuel 150 Liquid Fuel Pressure To verify the monitoring of liquid fuel pressure.
TE39
Fuel 160 Corrected Speed To verify the proper calculation of corrected speed.
TE39
Fuel 170 Corrected Speed To verify the proper Gain selection

TE39
Fuel 190 NGP Error for Acceleration To verify the proper NGP error for acceleration from self-sustaining
speed to idle.
TE39
Fuel 195 NGP Average Acceleration Rate To verify the proper NGP average acceleration rate.
TE39
Fuel 197 NGP Acceleration Rate To verify the proper monitoring of the acceleration rate during start.
TE39
Fuel 200 NGP Load Control Error To verify the proper NGP load control error.
TE39
Fuel 205 NGP Max Continuous To verify the proper calculation of the maximum continuous Ngp and time-
delayed Ngp overspeed settings based on engine load.
TE39
Fuel 210 NGP Alarm and Shut Down To verify the proper alarm and shut down annunciation for the gas
producer.
TE39
Fuel 330 T5 Max Reference Temperature To verify the proper calculation of T5 maximum reference temperature.
TE39
Fuel 350 T5 Base Temperature To verify the proper calculation of T5 compensator.

TE39

Solar Turbines

Fuel 370 Constant TRIT Offset To verify the proper calculation of offset for constant TRIT.
TE39
Fuel 390 T5 Thermocouple Inputs Checks To verify the proper checks of T5 thermocouples.
TE39
Fuel 400 T5 Scaling To verify the proper T5 scaling.

TE39
Fuel 410 T5 Temperature Monitoring To verify the monitoring of the engine T5.
TE39
Fuel 430 T5 Display To verify the proper T5 display.

TE39
Fuel 450 T5 Max Control To verify the annunciation if maximum temperature exceeds pre-defined
limit above the average.
TE39
Fuel 460 T5 Spread To verify the proper calculation of the T5 spread from max to min for
display and data logging purposes.
TE39
Fuel 470 T5 Thermocouple Failure To verify the annunciation when thermocouple failure is detected and
that action is taken for multiple thermocouple failure.
TE39
Fuel 480 Lite Around Failure To Verify the monitoring of individual thermocouples during light off
sequence.
TE39
Fuel 500 T5 Set Point To verify the T5 control of the fuel control system.
TE39
Fuel 510 T5 Peak Offset To verify that the T5 temperature topping set point is offset for island
mode operation and sets the delayed shutdowns equal to the normal on-
TE39
grid topping limit.
Fuel 520 Start Ramp Suspend To verify the proper indication to suspend start ramp during acceleration.
TE39
Fuel 530 T5 Error To verify the proper calculation of T5 error.

TE39
Fuel 540 T5 Alarm and Shutdowns To verify the high T5 temperature protection as required.
TE39

Solar Turbines

Fuel 550 Gas Valve Flow Area To verify the proper calculation of the valve flow area used in flow
calculation.
TE39
Fuel 555 Gas Fuel Main Flow Calculated To verify the proper calculation of the gas fuel main flow.
TE39
Fuel 560 Gas Fuel DP Control To verify the gas fuel DP control of the gas fuel control system.
TE39
Fuel 590 Gas Fuel Start Ramp To verify the proper calculation of light off and start ramp signals for fuel
control during ignition and acceleration for gas fuel applications.
TE39
Fuel 600 Liquid Fuel Start Ramp To verify the proper calculation of light off and start ramp signals for fuel
control during ignition and acceleration for liquid fuel applications.
TE39
Fuel 610 Maximum Fuel Limiting To verify the proper calculation for maximum fuel limiting.
TE39
Fuel 630 Minimum Fuel To verify the proper calculation of minimum fuel.
TE39
Fuel 650 Fuel Min Max PI Control To verify the proper error and control mode selection.
TE39
Fuel 660 Fuel Control Mode Indication To verify the proper mode indication for fuel control.
TE39
Fuel 670 Fuel Control Signal To verify the proper determination of fuel control signal.
TE39
Fuel 675 Fuel Signal Compensation To verify the proper control of the gas fuel valve signal compensation.
TE39
Fuel 680 Gas Fuel High Force or Low To verify the proper control of the gas fuel high force, low force actuator
Force Actuator or CCC or CCC Controller.
TE39
Controller
Fuel 690 Liquid Fuel Valve To verify the proper interface for the liquid fuel valve.
TE39
Fuel 700 Fuel Signal Delta To verify the proper calculation of the difference in fuel command
between scans as well as between every six scans.
TE39

Solar Turbines

Fuel 720 Flameout Detection To verify the detection of engine flameout and shuts down and
annunciates as required
TE39
Fuel 840 Engine Guide Vane Control To verify the proper guide vane control during start and run modes.
TE39
Fuel 850 Inlet Guide Vane Control To verify the proper control of the inlet guide vane.
TE39
Fuel 870 Bleed Valve Control To verify the proper bleed valve control during start and run modes.
TE39
Fuel 880 Bleed Valve Actuator To verify the proper opening and closing of the bleed valve.
TE39
Fuel 890 Igniter and Torch To verify the proper control of Igniter and Torch.
TE39
Fuel 950 Fuel Outputs To verify the proper fuel outputs.

TE39
Generator Generator Program Inputs (from To verify the CGCM inputs and appropriate annunciation on
010 CGCM's) communication failure.
TE39
Generator Switchgear Malfunction and To verify Switchgear Malfunction and Differential Or Ground Fault
020 Differential Or Ground Fault shutdowns annunciations are present.
TE39
Generator CGCM Read/Write To verify the CGCM’s configuration and unscheduled read/write
040 communication.
TE39
Generator Generator Load Speed modes To verify the proper selection of the generator load control modes.
080 TE39
Generator Load Control Mode Status To verify the proper load control mode status indication.
090 TE39
Generator Generator Percent KW To verify the proper calculation of Generator Percent KW.
100 TE39
Generator KW / Import / Export control To verify the proper function of KW / Import / Export options.
110 options TE39

Solar Turbines

Generator kW Error To verify the proper calculation of the kW error signal.
120 TE39
Generator kW Load Control PI To verify the proper load control bias proportional integral control.
140 TE39
Generator Speed Droop Bias To verify the proper calculation of the speed droop bias offset.
150 TE39
Generator Generator Load Share Bias To verify the load share bias input from CGCM.
160 TE39
Generator Generator synchronization To verify the generator synchronization sequence.

170 sequence TE39
Generator Synchronize Bias To verify the proper calculation of the speed autosync bias offset.
180 TE39
Generator Load Control Initialize To verify the proper initialization of the load and speed set point for
190 control mode transfer.
TE39
Generator Load Set Point To verify the proper calculation of the load control speed set point.
200 TE39
Generator Protective relays To verify the proper function of the CGCM protection relays.
210 TE39
Generator Breakers control To verify the proper Breakers control function.

220 TE39
Generator kVAR Power Factor Set points To verify the proper adjustment of CGCM set points for power factor and
240 kVAR control modes.
TE39
Generator Excitation Control Set points To verify the Excitation control set points
250 TE39
Generator Voltage modes selection To verify the proper Voltage mode selection
260 TE39
Generator Voltage Regulator Excitation To verify the proper function of the excitation control.
270 Control TE39

Solar Turbines

Generator Generator winding temperature Monitors Generator winding temperature RTD's for high temperature.
280 monitoring Annunciates and shuts down as required. Provides temperature
TE39
indication for display and indicates over and under range for each input
channel.
Generator CGCM’s Outputs To verify the outputs from PLC to CGCM’s.
290 TE39
Generator CGCM Fault Output To verify synchronization of CGCM configuration bits for fault detection
295 to CGCM outputs.
TE39
Generator Generator Outputs To verify generator program outputs.

300 TE39
HMI 010 Common PGM Inputs To verify the proper function of the HMI inputs from other programs,
which are common to all applications.
TE39
HMI 020 Off Loc Aux Selection To verify the proper function of selection for Off, Local, Auxiliary, and
Remote operation.
TE39
HMI 025 Off Local Aux Remote Mode To verify the proper logic for Aux, Local, and Remote mode selection.
TE39
HMI 030 Off Skid Turbine Control Panel To verify the proper function of the Off Skid Turbine Control Panel Inputs.
Inputs TE39
HMI 040 On Skid Turbine Control Panel To verify the proper function of the On Skid Turbine Control Panel Inputs.
Inputs TE39
HMI 050 Turbine Control Panel To verify the proper function of processes IO common to Oil and Gas
Gen Sets with a local off skid Turbine Control Panel
TE39
HMI 055 TCP Off Skid GS Local To verify the proper function of processes IO common to Oil and Gas
Gen Sets with a Local on skid Turbine Control Panel
TE39
HMI 070 On-Skid Control Box To verify the proper temperature monitoring inside the on-skid control
Temperature box.
TE39
HMI 100 Terminal Common Commands To verify the proper function of the terminal common commands from
local, aux and remote displays.
TE39
HMI 110 Terminal Common Commands To verify the proper function of the terminal common driven commands
[Driven] from local, aux and remote displays.
TE39

Solar Turbines

HMI 150 Remote Hardwire Inputs To verify the proper function of the Remote hardwire Common
Common commands.
TE39
HMI 160 Remote Hardwire Inputs To verify the proper function of the Remote hardwire Generator
Generator commands.
TE39
HMI 170 Remote Hardwire Voltage To verify the proper function of the Remote hardwire Voltage Adjust.
Adjust TE39
HMI 200 Start Hour Meter To verify the proper function of Start and Hour Meters.
TE39
HMI 210 Auto Start and Auto Sync To verify the proper function of the Auto-start/sync commands.
TE39
HMI 260 HMI commands To verify that operator commands affecting the generator program are
processed properly.
TE39
HMI 450 Starter VFD Configuration To verify the configuration request command for the Starter VFD can be
Command activated from the display.
TE39
HMI 460 Slow Roll Command To verify slow roll command(s) can be activated from the display.
TE39
HMI 516 Liquid PCD Fwd Purge To verify Commands for Liquid Fuel Manifold PCD Forward Purge
TE39
HMI 528 TCP Fuel Select Switch Local To verify functionality of the fuel select switch signal from an off skid
local turbine control panel in the controls system.
TE39
HMI 530 Dual Fuel Commands To verify the operator interface commands related to the dual fuel option.
TE39
HMI 540 Enclosure Driven Vent Fan To verify the proper processing of commands for selecting the active
Select enclosure driven vent fans.
TE39
HMI 550 Enclosure Vent Fan Select To verify proper processing of commands for selecting the active
enclosure vent fan.
TE39
HMI 560 On Crank Water Wash To verify proper processing of commands related to the On Crank Wash
Option.
TE39

Solar Turbines

HMI 570 On line Wash Commands To verify proper processing of commands related the On Line Wash
Option.
TE39

SECTION: 05.03.A
COMPRESSOR CASE LEAK TEST
LEAK TEST CHART

SECTION: 05.03.B
COMBUSTOR CASE LEAK TEST
LEAK TEST CHART

SECTION: 05.03.C
ENGINE FUEL MANIFOLD HYDROSTATIC TEST
1. HYDROSTATIC TEST CHART

TURBOTEC PRESSURE TEST- STATION 3
PRESSURE MAXIMUM
PRESSURE
900
800
797.8
700
PRESSURE (PSI)
600
500
400
300
200
100
0
0 2 4 6 8 10 12 14 16 18
TIME (MINUTES)
TEMPERATURE
100 MAXIMUM
80 TEMPERATURE
TEMPERATURE
(DEGREES F)
60
76.3
40
20
0
0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00
TIME (MINUTES)
Part Number: 301504-101 Start Date: 22-Jul-08 First Pressure Reading: 797.6
Test Pressure (PSI): 780+/-20 PSI Start Time: 4:45 PM Last Pressure Reading: 792.3
Serial Number: JUL08-38870 Finish Date: 22-Jul-08 Maximum Test Pressure: 797.8
Time Between Measurements: 1 MINUTE Finish Time: 5:00 PM Minimum Test Pressure: 792.1
Operator: SABINO URIETA
Test Pressure Difference: 5.7
Comments:
GPH-001 Rev.01 12-02-04

STATION 3
AVERAGE TEMPERATURE AND PRESSURE READINGS
TIME
(MIN) TEMPERATURE PRESSURE
0 76.3 797.6 Start Date: 7/22/08
1 76.2 797.3 Start Time: 4:45 PM
1 76.2 797.8 Finish Date: 7/22/08
2 76.1 797.2 Finish Time: 5:00 PM
2 76.0 797.3
3 76.0 797.5 Operator: SABINO URIETA
3 76.0 797.8 Part Number: 301504-101
3 75.9 797.2 Serial Number: JUL08-38870
4 75.8 795.7 Sampling Time (minutes): 15
4 75.8 796.1 Test Pressure (PSI): 780+/-20 PSI
5 75.7 795.1 First Pressure Reading: 797.6
5 75.7 795.1 Last Pressure Reading: 792.3
6 75.6 795.1 Minimum Test Pressure: 792.1
6 75.5 795.1 Maximum Test Pressure: 797.8
6 75.5 794.5 Maximum Temperature: 76.3
7 75.4 793.8
7 75.4 794.3
8 75.4 793.7 Test performed per ES 9-78
8 75.3 793.7 GPH-001 Rev.01 12-02-04
9 75.3 793.2
9 75.2 793.5
9 75.2 792.7
10 75.2 793.1
10 75.1 792.3
11 75.1 792.5
11 75.0 792.3
12 75.0 792.6
12 75.0 792.5
12 74.9 792.4
13 74.9 792.6
13 74.9 792.5
14 74.8 792.1
14 74.8 792.5
15 74.8 792.6
15 74.8 792.3
SECTION: 05.03.C
ENGINE FUEL MANIFOLD HYDROSTATIC TEST
2. X-RAY REPORT
THIS FUEL RING MANIFOLD DOES NOT CONTAIN
ANY CIRCUMFERENTIAL BUTT WELDS.
RADIOGRAPHY DOES NOT APPLY

SECTION: 05.04
ROTOR ASSEMBLY - COMPRESSOR AND TURBINE
SOLAR CERTIFICATE OF COMPLIANCE

CERTIFICATE OF COMPLIANCE
SOLAR TURBINES INCORPORATED, HEADQUARTERED IN SAN DIEGO, CALIFORNIA,
HEREWITH CERTIFIES ON INFORMATION AND BELIEF:
ROTORS ASSEMBLY – COMPRESSOR AND TURBINE

MECHANICAL/ELECTRICAL RUNOUTS AND BALANCE DATA
The following rotors and their supporting documents for Engine Serial # 0560B, PD #3C841, have been
reviewed to ensure that they are in accordance with Solar standards, drawings, specifications and
practices and Quality requirements.
Compressor Rotor
Mechanical/Electrical 05.04.A P/N 330171-100 S/N ROG08-46780
Balance 05.04.D P/N 330171-100 S/N ROG08-46780
GP Rotor
Mechanical/Electrical 05.04.B P/N 304498-100 S/N ROG08-46485
Balance 05.04.E P/N 304498-100 S/N ROG08-46485
SECTION: 05.04.A
GAS PRODUCER COMPRESSOR ROTOR
INSPECTION DATA
Dimensional summary sheet for serial number: ROG08-46780
September 2, 2008
Page 1 of 1
Dimension Description Op# Result Minimum Maximum Red Badge Date Initials Red Sign Off
2AFTTOOL AFT HUB AROBOTEC DIA 0050 .0001 0 .0002 45917 02-AUG-08
2FWDTOOL FWD CONE AROBOTEC DIA 0050 .00015 0 .0002 45917 02-AUG-08
2RO0 STG 0 LAB SEAL R/O 0050 .0005 0 .003 45917 02-AUG-08
2RO00AN STG 00 ANGLE 0050 45 0 360 45917 02-AUG-08
2RO10 STG 10 SPACER R/O 0050 .0019 0 .003 45917 02-AUG-08
2RO12 AFT HUB SPACER R/O 0050 .0014 0 .003 45917 02-AUG-08
2RO12AN AFT HUB ANGLE 0050 0 0 360 45917 02-AUG-08
2ROCONE CONE 7" DIA R/O 0050 .001 0 .003 45917 02-AUG-08
2ROCONEAN CONE ANGLE 0050 315 0 360 45917 02-AUG-08
BRG1E FWD CONE ELECT R/O 0050 .02 0 .05 45917 02-AUG-08
BRG1M FWD CONE MECH R/O 0050 .0001 0 .0002 45917 02-AUG-08
BRG2E AFT HUB ELECT R/O 0050 .01 0 .05 45917 02-AUG-08
BRG2M AFT HUB MECH R/O 0050 .00005 0 .0002 45917 02-AUG-08
(Dim_Rpt_Opn.Rdf) COMPANY CONFIDENTIAL For Reference Only

SECTION: 05.04.B
GAS PRODUCER TURBINE ROTOR
INSPECTION DATA
September 2, 2008
Page 1 of 1
BT1B BEARING JOURNAL DIA. 0005 3.4999 3.4997 3.5 27057 01-AUG-08
CT1B SHAFT SEAL DIA. 0005 4.365 4.363 4.367 27057 01-AUG-08
CT2B LABYRINTH SEAL DIA. 0005 8.3349 8.334 8.336 27057 01-AUG-08
INCH MECHANICAL RUN-OUT 0005 .00015 0 .0002 44885 01-AUG-08
KTA CURVIC ADDEMDUM 0005 .0585 .057 .061 27978 01-AUG-08
VOLTS ELECTRICAL RUN-OUT 0005 .02 0 .05 44885 01-AUG-08

SECTION: 05.04.D
BALANCE GAS PRODUCER COMPRESSOR ROTOR
INSPECTION DATA
September 2, 2008
Page 1 of 1
AMTAFT2 AFTER GRIND AFT IMBALANCE 0055 3.01 0 6 45917 02-AUG-08
AMTFWD2 AFTER GRIND FWD IMBALANCE 0055 3.31 0 6 45917 02-AUG-08
ANGAFT2 HEAVY ANGLE 0055 63 0 360 45917 02-AUG-08
ANGFWD2 HEAVY ANGLE 0055 8 0 360 45917 02-AUG-08

SECTION: 05.04.E
BALANCE GAS PRODUCER TURBINE ROTOR
INSPECTION DATA
September 2, 2008
Page 1 of 1
DEG-E ANGLE LOCATION 0050 95 0 360 27385 04-AUG-08
DEG-G ANGLE LOCATION 0050 120 0 360 27385 04-AUG-08
INCH-A RUNOUT STG 3 DISC 0050 .001 0 .003 26844 03-AUG-08
INCH-C RUNOUT STG 1 DISC 0050 .001 0 .003 26844 03-AUG-08
OZIN-E IMBALANCE STG #1 0050 .0985 0 .16 27385 04-AUG-08
OZIN-G IMBALANCE STG #3 0050 .0868 0 .16 27385 04-AUG-08

SECTION: 05.06
GEAR BOX
INSPECTION DATA
THE GEAR BOX IS DYNAMICALLY
TESTED WITH THE TURBINE
DURING PACKAGE TEST. ALL TEST
DATA IS LOCATED IN ITEM 05.07.
SECTION: 05.07
ENGINE PERFORMANCE TEST
ENGINE TEST REPORT

SECTION: 06.00
THIS SECTION DOES NOT APPLY
NO DOCUMENTS REQUIRED
SECTION: 07.05
DIMENSIONAL CHECK
QC FOLDER DIMENSIONAL VERIFICATION SHEET

SECTION: 08.01
PACKAGE/CONSOLE ACCEPTANCE TEST
CERTIFIED TEST REPORT

SECTION: 08.02
ENCLOSURE ASSEMBLY STATIC TEST
STAMP OFF SHEET IN 08.01

SECTION: 09.00
PACKAGE FINAL INSPECTION
NO DOCUMENTS REQUIRED
SECTION: 10.01
QC DATA BOOK REVIEW
1. PACKAGE CERTIFICATE OF COMPLIANCE

SECTION: 10.01
QC DATA BOOK REVIEW
2. ITP (REFERENCE COPY)

Inspection and Test Plan Certification:
Solar Turbines
A Caterpillar Company BUMI PD # 3C841 NEC
Revision Number: D Dated: August 25, 2008
Prepared for
Bumi Armada
This ITP was Prepared By: Larry Proctor, Quality Engineer
Equipment includes 2 Each, Taurus GS Package(s). Powered by Taurus 70-10301 turbine(s).
FOURTEEN (14) Working Days Notification Required For All Customer INSPECTION/OBSERVATION Items.
Inspection Points: Column A is Column B is Column C is Column D is

Solar Inspector / Engineer Bumi/DPS End User ABS
The ITP is developed from the Solar Application Check Sheet (ACS) and information provided by the Business Manager
and the Project Applications Engineer. Revisions are based on Customer input provided during project execution.
Special inspections, documents or tests above and beyond our standard are shown.
The legend at the bottom of each page indicates what inspection / test points or documents are required.
'O1' Indicates Customer, Third Party or Certifying Agency inspection on 100% of units, operations or tests on that project. Every
effort is made to have the inspector present when these operations are conducted. The inspection or test has not necessarily
been performed in advance, prior to the observation point. Should the inspector be unavailable at the time of the actual
inspection or test, production is not stopped. Review of verifying documents is included. Equipment in ITP Section 1.0 shall be
released if Customer's Inspector fails to respond or fails to appear.
'O2' Identical to 'O1', but performed on a sampling of units, operations or tests on that project (not necessarily 100%). Every effort is
made to have the inspector present when these operations are conducted. The inspection or test has not necessarily been
performed in advance, prior to the observation point. Should the inspector be unavailable at the time of the actual inspection or
test, production is not stopped. Notification requirements are the same as for '01'. Equipment in ITP Section 1.0 shall be
released if Customer's Inspector fails to respond or fails to appear.
'A1' Indicates Solar inspection or test on 100% of units, operations or tests on that project.
'A2' Indicates Solar inspection or test on only a sampling of units, operations or tests on that project.
'R1' Indicates an in-process document review is required on 100% of units on that project. The in-process review is to take place at
the operation or test location unless the document is included in the databook. A copy of the verifying document is not supplied
unless also identified with an 'X' in Solar's column 'A'.
'R2' Indicates an in-process document review is required on only a sample of units on that project. The in-process review is to take
place at the operation or test location unless the document is included in the databook. A copy of the verifying document is not
supplied unless also identified with an 'X' in Solar's column 'A'.
'M2' Indicates a sample monitoring of Solar's system is required. This monitoring will be on random equipment, and may not be
project specific.
'X' In Solar's column 'A' indicates a copy of the document will be supplied in the Project Quality Assurance Data Book. The
Databook contains a reference copy of the ITP. Individual documents are identified with the ITP Item number and are found in
the corresponding sections. The documents consist of supplier information and Solar information.
All supplier documents are to be submitted to: or Emailed to: solar_quality_documents@solarturbines.com

Quality Document Coordinator
Solar Turbines Incorporated (KM20)
4200 Ruffin Road PAGE: 1
San Diego, CA 92123, USA
Caterpillar Confidential: Green

Solar Turbines Inspection and Test Plan
Source Inspection Instructions for ITP Section 1.0 ONLY
Suppliers Noted in Section 1.XX of this ITP-

1. Supplier is to notify customer (email/fax) for any O1, O2, M2 inspection points in columns B, C, D and
copy all notifications to Solar representative (Ron Lang) on page 3 of this ITP. Notification should be in
accordance with the time period listed on page 1. Contacts for the above inspections are on page 3,
items 0.2, 0.3, 0.4, 0.5.
2. Supplier to send (e-mail/fax) 30 day advanced inspection notification to Solar representative (Ron
Lang) on page 3, item 0.2 and Solar Supplier Quality Engineer (Fred Lemke) listed on page 3, item 0.1
rd
and applicable customer 3 party inspector.
3. Supplier to send (e-mail/fax) copy of notification to Solar purchasing representative and applicable
rd
customer 3 party inspector.
4. Supplier is to send (email/fax) “Second Notification” if required to customer inspector on page 3,
items 0.3, 0.4, 0.5, Solar Representative (Ron Lang), item 0.2, and Solar Supplier Quality Engineer
(Fred Lemke), item 0.1.
5. At Inspector’s arrival, confirm Inspector has latest Purchase Order and Drawing revision, and provide
Inspector with current copy(s), if required.
6. If Inspector and/or Solar’s customer’s inspector has not responded to a “Second Notification” within 48
hours, notify Solar representative (Ron Lang) on page 3, item 0.2.
7. All supplier documents required by this ITP are to be emailed to:
solar_quality_documents@solarturbines.com
Solar’s Contracted Source Inspector (Column A of Section 1.0)-

1. Upon receipt of Solar ITP, purchase order and drawing, notify supplier of your inspection assignment.
2. Upon receiving inspection notification from supplier, send (e-mail/fax) inspection confirmation to the
supplier.
3. Send (e-mail/fax) copy of inspection confirmation to Solar Supplier Quality Engineer and inspection
agency.
4. Respond to supplier second notification within 48 hours (see supplier Item 6 and Solar Turbines
Supplier Quality Engineer Item 5).
5. Please address ITP Section 1.0 source inspection reports to Fred Lemke 858/694-6817.
Email address: Lemke_fred_l@solarturbines.com.
Solar Turbines Supplier Quality Engineer- (Fred Lemke)

1. Create project file.
2. Send (email/fax/mail) copies of latest revisions of ITP, unpriced purchase order, drawings, etc. to
assigned contracted Inspector.
3. Send (email/fax/mail) copies of latest revisions of ITP, unpriced purchase order, drawings, etc., to
inspection agency.
4. Follow up on supplier to inspector “Second Notification”.
5. Reassign inspection to different Solar inspector and/or inspection agency 24 hours after supplier
notification to Solar that inspector did not respond to “Second Notification” (see supplier item number 6).
6. Request customer inspection waiver from Project Manager, if customer inspector did not respond to
supplier within 48 hours after supplier issued “Second Notification” (see supplier Item 6).
Note:
For Solar source inspections, only a Quality Engineer, Quality Manager, or Project Manager can waive
source inspection requirements.
For customer inspections, only the customer can waive source inspection requirements. All waivers must
be in writing (email or faxed).

PD NO: 3C841 NO. UNITS: 2 PAGE: 3
SOLAR TURBINES INCORPORATED
INSPECTION AND TEST PLAN ISSUED BY: Larry Proctor REV: D August 25, 2008
CLIENT: PROJECT NAME: PURCHASE ORDER: EQUIPMENT: Taurus GS

Bumi Armada BUMI Taurus 70-10301
ITEM ITEM DESCRIPTION ITEM ITEM DESCRIPTION
0.0 ITP approval by Solar Project Management. 0.4 COLUMN C CONTACT INFORMATION:
Company:
DATE: Contact:
Ray Newson, Project Manager Phone #:
Newson_Ray_P@solarturbines.com
Fax #:
Eric Stallings, Project Engineer Cell/Pgr#
stallings_eric_a@solarturbines.com
Email:
0.1 SOLAR SOURCE INSPECTION CONTACT: Company:
Contact: Fred Lemke Contact:
Phone: 858-694-6817 Fax: 858-694-6733 Phone #:
lemke_fred_l@solarturbines.com Fax #:
Cell/Pgr#
Email:
0.2 SOLAR CONTACT FOR ALL CUSTOMER INSPECTIONS IN Company:

SECTION 1 (01.XX):
Contact:
Contact: RON LANG
Phone #:
Phone #: 858-694-6121
Fax #:
Fax #: 858-694-6712
Cell/Pgr#
Email: lang_ron_a@solarturbines.com
Email:
0.3 COLUMN B CONTACT INFORMATION: 0.5 COLUMN D CONTACT INFORMATION:

Company: Bumi Armada Company: ABS Americas, San Diego Field Office
Contact: Hisham M. Hanafi Contact: Mr. Petar Barbaros
Phone #: +603 2171 5627 Phone #: (619) 236-1838
Fax #: +603 2171 5770 Fax #: (619) 236-0137
Cell/Pgr# +60 12 9051062 Cell/Pgr# 619-306-0294
Email: hisham.hanafi@bumiarmada.com Email: pbarbaros@eagle.org
Company: Company: ABS Los Angeles

Contact: Contact: Mike Michaud
Phone #: Phone #: 562-437-6488
Fax #: Fax #: 562-491-1840
Cell/Pgr# Cell/Pgr#
Email: Email: mmichaud@eagle.org
Company: Company: ABS America, Houston (Field Office)

Contact: Contact: Mr. Peter Malunat
Phone #: Phone #: 281-877-6439
Fax #: Fax #: 281-877-6338
Cell/Pgr# Cell/Pgr# 281-731-9489
Email: Email: pmalunat@eagle.org
Additional Contact for Column B:

Mohd Irwan Kamarulzaman
Phone: +603 2171 5756 Fax: +603 2171 5770
Cell: +60 12 3649452 Email: irwan@bumiarmada.com

Solar Bumi/DPS End User ABS

ITEM ITEM DESCRIPTION CONTROLLING VERIFYING
DOCUMENT RECORD A B C D
01.00 PACKAGING OPERATIONS PURCHASED Solar Quality
PARTS Management
System
01.01 RECEIVING INSPECTION - Inspect material per Solar Quality BAAN Material A2
Solar practices Management System
System
SUPPLIERS BELOW TO NOTE THE
Engineering
FOLLOWING:
Drawings
ALL DOCUMENTATION MARKED WITH 'X' IN
Purchase Order
COLUMN A SHALL BE PROVIDED TO SOLAR
WITHIN 14 CALENDAR DAYS OF
COMPLETION OF MANUFACTURING, AND/OR
FINAL SOLAR OR CUSTOMER INSPECTION.
DOCUMENTATION SHALL INCLUDE SOLAR
PO #, SOLAR PART NUMBER AND SOLAR
PROJECT NAME/NUMBER.
ELECTRONIC TRANSMITTAL OF
DOCUMENTS IS PREFERRED. SEND TO:
Solar_quality_documents@solarturbines.com
DOCUMENTS SHALL BE MAILED TO:

QUALITY DOCUMENTS COORDINATOR
MAIL ZONE: SP2C
9250 SKYPARK COURT
SAN DIEGO, CA 92123
NOTE: RECEIVING INSPECTION VERIFYING

DOCUMENTS ARE NOT APPLICABLE TO
DROP SHIPPED ITEMS.
01.03 AIR INLET SILENCER ES 1692

Engineering
(Drop Ship Item)
Drawings
Purchase Order
01.04 AIR INLET FILTER ES 1725

Engineering
(Drop Ship Item)
Drawings
Purchase Order
01.05 EXHAUST SILENCER ES 1632

Engineering
(Drop Ship Item)
Drawings
Purchase Order
A1 SOLAR 100% INSP/TEST R1 100% DOCUMENT REVIEW O1 100% OBSERVE INSP/TEST X SOLAR SUBMIT
VERIFYING DOCUMENT
A2 SOLAR SAMPLE INSP/TEST R2 SAMPLE DOCUMENT REVIEW O2 SAMPLE OBSERVE INSP/TEST M2 MONITOR SYSTEM



01.06 LUBE OIL COOLER ES 2184 1. Pressure Test R1 X O1
and Flush
Engineering
(Drop Ship Item) Certificate
Drawings
ABS Certified 2. Electrical R1 X
Purchase Order Device List
3. Electrical R1 X
Device Certificates
4. ABS Certificate R1 X
01.07 LUBE OIL FILTERS ASME VIII ASME Data Report R2 X R1

Engineering
Drawings
Purchase Order
01.08 GENERATOR Supplier Inspection 1. Factory R1 X O1 O1

and Test Plan Acceptance Test
ABS Certified
ES 2033
2. Electrical R1 X
Engineering Device List
Drawings
3. Electrical R1 X
Purchase Order Device Certificates
4. ABS Certificate R1 X
01.11 COUPLING Purchase Order Balance Data R1 X R1

Report
Engineering
Drawings
01.12 PACKAGE LIFTING KIT Purchase Order 1. Proof Load Test R1 X O1

Records
ES2335
ABS Certified
Engineering 2. ABS Certificate R1 X
Drawings
01.13 INTERNAL EQUIPMENT HANDLING SYSTEM Purchase Order 1. Proof Load Test R1 X O1
Records
ES2335
ABS Certified
Engineering 2. ABS Certificate R1 X
(Includes engine handling kit trolley beam(s), Drawings
engine handling kit external structure(s), start
motor removal kit trolley beam(s), start motor
removal external structure(s), hoists, jib crane,
and field tools, as applicable)
VERIFYING DOCUMENT



02.00 SKID BASE PLATE
(TURBINE PACKAGE)
(TurboFab, Houston)
Turbofab Contact: Chuck Belson

Tel: 281-860-6702
Fax: 281-860-6713
02.01 Review Welding Procedures TurboFab Quality PQR, WPS M2 X R1

Management
System
AWS D1.1
02.02 Review Welder Qualifications TurboFab Quality WQR M2 X R1

Management
System
AWS D1.1
02.03 Skid Fabrication TurboFab Quality Traveler A1 X O1

Management
Weld skid/lifting bollards, Dimensional check and System
visual inspection to AWS D1.1
Fabrication
(Built to engineering specifications using ASTM Drawings
A36 material) AWS D1.1
02.04 Lube Oil Tank - Pneumatic Leak Test TurboFab Quality Traveler A1 X O1
Management
System
02.05 Skid Surface Preparation and Paint ES 9-58 TurboFab Form A1 X

3016
02.06 Lube Oil Tank - Internal Coating TurboFab Quality Traveler A1 X

Management
(Coated with Brayco 785) System
VERIFYING DOCUMENT



03.00 MANIFOLDS
Solar Contact: Ron Lang

Tel: 858-694-6121
03.01 Review Welding Procedures ASME IX WPS, PQR M2 M2
03.02 Review Welder Qualifications ASME IX WQR M2 M2
03.03 Package Manifolds WPS Traveler A1 M2
Dimensional check and visual inspection Solar Quality

Management
Shop Travelers available for review only at System
Solar's facility. Engineering
Drawings
03.05 Manifold Radiography ASME B31.3 1. X-Ray Report R1 X R2
100% RT of circumferential butt welds required

on gas fuel system And liquid fuel system. 2. Radiograph A1
Standard is 5% per welder on circumferential

butt welds on the lube oil systemonly. NOTE:
Not per project
03.06 Hydrostatic Pressure Test of Manifolds Solar Quality Hydro Test Log A1 X M2
Management
(1.5 times design pressure for 10 minutes System
minimum)
Engineering
Package manifolds are manufactured and leak Drawings
tested at Solar facilities in San Diego, CA & ASME B31.3
Tijuana, Mexico.
VERIFYING DOCUMENT



04.00 CONTROLS

Tel: 858-694-6121
04.01 Visual Inspection of Control Console Wiring Project Electrical Control Console A1 X
Drawings Hardware Sheet in
04.02
04.02 Control System Hardware Verification Solar Quality Control Console A1 X O1

Management Hardware Sheet
This verification is performed on each unit of a System
multi-unit Sales Order.
Project Electrical
Drawings
04.03 Control System Software Verification Solar Quality Control Software A1 X

Management Verification Sheet
This verification is performed only once on a System
multi-unit Sales Order.
Project Electrical
Drawings
VERIFYING DOCUMENT



05.00 GAS TURBINE ENGINE TMP Quality
Managememt
Solar Contact: Ron Lang System
Tel: 858-694-6121 Business Control
Diagram
05.01 SUPPLIER QUALITY ENGINEERING Engineering BAAN System R2

Drawings
Review and approval of purchase requisitions for
first-time buy or revised parts. Purchase Order
BAAN System
05.02 RECEIVING INSPECTION Engineering BAAN System A2

Drawings
Inspect material per Solar practices
Purchase Order
BAAN System
05.03.A Compressor Case Leak Test Shop Floor Leak Test Chart A1 X O1
Information System
Cases are leak tested at the place of
manufacture. Cases are not assigned to a Engineering
specific project or a specific engine at the time of Drawings
leak testing.
05.03.B Combustor Case Leak Test Shop Floor Leak Test Chart A1 X O1
Information System
Cases are leak tested at the place of
manufacture. Cases are not assigned to a Engineering
specific project or a specific engine at the time of Drawings
leak testing.
05.03.C Engine Fuel Manifold Hydrostatic Test Shop Floor 1. Hydrostatic Test A1 X R1
Information System Chart
100% Radiography
ES 9-78 2. X-Ray Report R1 X
Manifolds are manufactured and leak tested at Engineering
Turbotec in Tijuana, Mexico. Drawings
05.04 ROTOR ASSEMBLY - COMPRESSOR AND Shop Floor Solar Certificate of R1 X

TURBINE Information System Compliance
NOTE: Customer identification is assigned at

this point.
05.04.A Gas Producer Compressor Rotor Shop Floor Inspection Data A1 X

Information System
(Mechanical and Electrical Runout)
Engineering
Drawings
VERIFYING DOCUMENT



05.04.B Gas Producer Turbine Rotor Shop Floor Inspection Data A1 X
Information System
(Mechanical and Electrical Runout)
Engineering
Drawings
05.04.D Balance Gas Producer Compressor Rotor Shop Floor Inspection Data A1 X O1
Information System
Engineering
Drawings
05.04.E Balance Gas Producer Turbine Rotor Shop Floor Inspection Data A1 X O1
Information System
Engineering
Drawings
05.05 ENGINE ASSEMBLY Shop Floor A1 M2

Information System
05.06 GEAR BOX Shop Floor Inspection Data A1 X M2

Information System
Gears manufactured, inspected and assembled
by Superior Gear, Division of Solar Turbines. Engineering
Drawings and
Specifications
05.07 ENGINE PERFORMANCE TEST ES2233 Engine Test Report A1 X O1 O1
Utilizing the Facility Test Stand and TMP & PSO Quality
Dynamometer to load engine Management
System
VERIFYING DOCUMENT



06.00 THIS SECTION DOES NOT APPLY .
SOLAR IS NOT PROVIDING A PROCESS
COMPRESSOR.
VERIFYING DOCUMENT



07.00 PACKAGE ASSEMBLY

Tel: 858-694-6121
07.01 Base Qualification Project Mechanical QC Folder Check A1

Installation Drawings List
(Customer fixed interface points prior to build-up
of package.)
07.02 Mechanical Assembly Solar Quality QC Folder Check A1 M2

Management List
System
07.03 Electrical Assembly Solar Quality QC Folder Check A1 M2

Management List
System
07.04 Review Alignments Solar Quality QC Folder A1 R1

Management Alignment Sheet
System
Project Mechanical
Installation Drawings
07.05 Dimensional Check Project Mechanical QC Folder A1 X O1 O1

of Customer Interface Points Installation Drawings Dimensional
Verification Sheet
(during build-up of package - including tie down
points, customer connection plates and flanges)
VERIFYING DOCUMENT



08.00 PACKAGE TEST

Tel: 858-694-6121
08.01 Package/Console Acceptance Test Solar Quality Certified Test A1 X O1 O1

Management Report
System
ES 2004 (Package)
08.02 Enclosure Assembly Static Test Solar Quality Stamp Off Sheet A1 X O1
Management in 08.01
(Including simulated test of fire and combustible System
gas system (if present)).
VERIFYING DOCUMENT



09.00 PACKAGE FINAL INSPECTION

Tel: 858-694-6121
09.01 Mechanical Final Inspection Solar Quality QC Folder Check A1 O1 O1

Management List
System
Project Mechanical
Drawings
09.02 Electrical Final Inspection Solar Quality QC Folder Check A1 O1 O1

Management List
System
Project Electrical
Drawings
09.03 Paint Final Inspection Solar Quality QC Folder A1

Management Checklist
System
09.04 Loose Ship Solar Quality Pack Slip A1

Management
System
09.05 Package Preservation And Preparation For Solar Quality OK to Ship QC Tag A1 O1 O1
Shipment Management
System
Shipping/Traffic
Functional Practices
ES 9-249
ES 9-248
VERIFYING DOCUMENT



REVISION RECORD SHEET
REV DATE BY REMARKS
A 03/26/08 Larry Proctor Revision A is the initial release of the ITP.
B 06/16/08 Larry Proctor Revision B: Added O1's in items 02.03, 02.04, 04.02, 05.03.A, 05.03.B, 05.04.D, 05.04.E, 07.05, 08.02,
09.05. Added customer contact information in column B and D. Added radiography for liquid fuel
manifolds.
C 08/08/08 Larry Proctor Revision C: Added item 05.07.
D 08/25/08 Larry Proctor Revision D: Removed DPS contact names from column B.
VERIFYING DOCUMENT

SECTION: 10.02
ELECTRICAL DEVICE LIST

ELECTRICAL DEVICE CERTIFICATION LIST
DATE: Nov. 10, 2008
SALES ORDER: 2-3C841
MODEL: TAURUS 70 GS
BUMI, 3C841 DRAWING NO.: 3C841-149939
REVISION: NC
SERIAL NO.: TG08988, TG08989
PREPARED BY: ADRIAN GARCIA
- This device list contains electrical components associated with the turbine control console and turbine skid.
- Column headings:
"REF DES" The reference designator is used to identify each device as follows. The first 1 or 2
letters designates the type of component. (B = Motor, DS = Light) The number following
the letters indicates the location. (2 = Control boxes, 3 = Turbine skid)
"MANUFACTURER" Manufacturer or vendor supplying part.
"MANUFACTURER P/N" Part number specified by manufacturer or supplier as reference for certification.
"CERTIFICATION" Lists one or more of the certifying agencies, list number, file number, or certificate
number.
"CL I, Level of protection as referenced by certification.

DIV 1,DIV 2, ORDINARY"
"REV" Denotes change by revision letter.
- Note 1: The RTD's, thermocouples and magnetic pickups are sealed units with wiring in rigid conduit and EP boxes. The RTD's monitoring
liquid temperature are in thermowells. RTD's, thermocouples and magnetic pickups are considered integral to the turbine package
and therefore included in the CSA LR35592 and LR26165 Certification series.
Caterpillar: Confidential Yellow

THE FOLLOWING COMPONENTS ARE LOCATED IN THE TURBINE CONTROL CONSOLE AND CONTROL BOX
MANUFACTURER CSA CERT

ISA TAG DESCRIPTION MANUFACTURER/ COMPANY CERTIFICATION DIV 1 DIV 2 ORDINARY COMMENTS REV
P/N CLASS
MODEL
YA1172 HORN ALARM AUDIBLE ALARM EDWARDS SIGNALING UL: UGKZ7.E46293 X
879EXP-G1
YA0172 HORN ALARM AUDIBLE ALARM FEDERAL SIGNAL MODEL 450 CSA: LR005835 4812-04 X
CB0011 CIRCUIT BREAKER, 20A ALLEN BRADLEY 1492-CB CSA: LR166382 3215-30 X
CHASSIS CONTROLLOGIX (7-
ZX0010 ALLEN BRADLEY 1756-BATM CSA: LR69960 2258-02 X
SLOT)
CHASSIS BN 1701 (10
ZX0110 BENTLY NEVADA 1701/05 CSA: LR26744 2258-02 X
SLOT)
CHASSIS BN 1701 (10
ZX0130 BENTLY NEVADA 1701/05 CSA: LR26744 2258-02 X
SLOT)
INDICATOR LIGHT
YLI0101 HONEYWELL SENSING SERIES AML41 CSA: LR004442 6231-09 X
LOCAL/AUXILIARY SELECT
YLI0111 INDICATOR LIGHT STOPPING HONEYWELL SENSING SERIES AML41 CSA: LR004442 6231-09 X
YLI0113 INDICATOR LIGHT COOLDOWN HONEYWELL SENSING SERIES AML41 CSA: LR004442 6231-09 X
YLI0114 INDICATOR LIGHT STARTING HONEYWELL SENSING SERIES AML41 CSA: LR004442 6231-09 X
INDICATOR LIGHT BACKUP
ACTIVE
YLI0159 INDICATOR LIGHT ON LOAD HONEYWELL SENSING SERIES AML41 CSA: LR004442 6231-09 X
INDICATOR LIGHT ALARM
SUMMARY
INDICATOR LIGHT SHUTDOWN
SUMMARY
YLI0177 INDICATOR LIGHT READY HONEYWELL SENSING SERIES AML41 CSA: LR004442 6231-09 X
INDICATOR LIGHT READY TO
LOAD
INDICATOR LIGHT FIRE
YLI1981 R. STAHL 8013/3 UL: NWFN8.E182378 X
SYSTEM AUTO
SYSTEM INHIBIT
SYSTEM DISCHARGED
LIGHT CONSOLE
SL0273 THIN-LITE CORP P293 CSA: LR38177 3429-01 X
FLUORESCENT
YLI05 INDICATOR LIGHT SPARE HONEYWELL SENSING SERIES AML41 CSA: LR004442 6231-09 X
INDICATOR LIGHT PE
GROUND FUSE BLOWN
SUITABLE
FOR
CLASS 1
DIV 2
FU0136 FUSE 30 AMP ALLEN BRADLEY 1492-FB1C30 CSA: LR071101 6225-01 X WHEN
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
FU0012 FUSE 20 AMP ALLEN BRADLEY 1492-FB1C30 CSA: LR071101 6225-01 X CLASS 1
DIV 2
WHEN
P/N CLASS
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES

P/N CLASS
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
DIV 2
WHEN
P/N CLASS
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES

P/N CLASS
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
DIV 2
WHEN
P/N CLASS
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
HOLDER FUSE RAIL
FU0181 ALLEN BRADLEY 1492-FB1C30 CSA: LR071101 6225-01 X WHEN
MOUNTED
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
HOLDER FUSE RAIL
FU0190 ALLEN BRADLEY 1492-FB1C30 CSA: LR071101 6225-01 X WHEN
MOUNTED
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES

P/N CLASS
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
DIV 2
WHEN
P/N CLASS
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
SUITABLE
FOR
CLASS 1
DIV 2
USED
WITH
CLASS CC
FUSES
MF0101 FAN MOTOR, PLC COOLING SOLAR TURBINES 154554-12 CSA: LR071101 6225-01 X NOTE 1
FLOW FILTER MAIN LUBE
XA0010A ALLEN BRADLEY 1786-TPYR CSA: LR35592 9098-01 X NOTE 1
FILTER
XA0010B FLOW FILTER MAIN PUMP ALLEN BRADLEY 1786-TPYR CSA: LR35592 9098-01 X NOTE 1
P/N CLASS
SUCTION
FLOW FILTER PRE/POST
PUMP SUCTION
FLOW FILTER BACKUP LUBE
XA0030B ALLEN BRADLEY 1786-TPYR CSA: LR35592 9098-01 X NOTE 1
OIL PUMP SUCTION
FLOW FILTER SERVO
ACTUATOR
XA0050B TRAP PCD CONDENSATE ALLEN BRADLEY 1786-TPYR CSA: LR35592 9098-01 X NOTE 1
FLOW FILTER START-UP, #1
ENGINE BEARING
FLOW FILTER STARTUP GAS
PRODUCER
FLOW FILTER POST LUBE
BACKUP
FLOW FILTER FILTER
PACKAGE AIR SUPPLY
FLOW FILTER STARTUP,
GEARBOX
GENERATOR, DRIVEN END
GENERATOR, EXCITER END
STRAINER LUBE OIL TANK
FILL
STRAINER LUBE OIL TANK
FILL
FLOW FILTER FILTER GAS
FUEL
FLOW FILTER MAIN LIQUID
FUEL FILTER ASSEMBLY
FLOW FILTER MAIN LIQUID
FUEL FILTER
FLOW FILTER FILTER FUEL
TO METERING VALVE
FLOW FILTER PROTECT
SPRAY RING (ON-CRANK)
FLOW FILTER PROTECT
SPRAY RING (ON-LINE)
FLOW FILTER LUBE OIL
TANK FILL
FLOW FILTER ON-CRANK
ENGINE CLEANING SUPPLY
FLOW FILTER ON-LINE
ENGINE CLEANING SUPPLY
FLOW FILTER SEPARATOR
TANK VENT
FLOW FILTER COALESCER
LIQUID FUEL COALESCER
IGNITION EXCITER
IGNITION
POWER GENERATOR SEE
XA0170B VENDOR DRAWING FOR ALLEN BRADLEY 1786-TPYR CSA: LR35592 9098-01 X NOTE 1
DETAILS
SPEED ELEMENT GAS
PRODUCER GEARBOX

P/N CLASS
SENSOR ELEMENT GAS
PRODUCER
HEATER GENERATOR SPACE
220V AC
HEATER MAIN LUBE TANK
TEMPERATURE
HEAT EXCHANGER LUBE OIL
COOLER
?1 - Function Text HEAT
EXCHANGER
YTAP ADAPTER RIGHT ANGLE TYPE PLC-
YY0050 PHOENIX CONTACT UL: QVAJ7.E199827 X
CONNECTOR RSC-24DC/21
YY0332 YTAP ADAPTER RIGHT ANGLE PHOENIX CONTACT TYPE PLC- UL: QVAJ7.E199827 X
P/N CLASS
RELAY LIQUID FUEL TYPE PLC-
CONTROL VALVE RSC-24DC/21
TYPE PLC-
YY0231 RELAY IGNITION PHOENIX CONTACT UL: QVAJ7.E199827 X
RSC-24DC/21
RELAY ENCLOSURE VENT FAN TYPE PLC-
#2 RSC-24DC/21
RELAY LOWSPEED/OPEN TYPE PLC-
PROBE SETPOINT RSC-24DC/21
TYPE PLC-
YY0234 RELAY VENTILATION ON PHOENIX CONTACT UL: QVAJ7.E199827 X
RSC-24DC/21
RELAY SCAVENGING PUMP TYPE PLC-
SUPPLY - DC RSC-24DC/21
RELAY LUBE OIL TANK TYPE PLC-
HEATER RSC-24DC/21
RELAY SCAVENGING PUMP TYPE PLC-
SUPPLY - AC RSC-24DC/21
RELAY LUBE OIL COOLER TYPE PLC-
FAN #1 RSC-24DC/21
RELAY MAIN LIQUID FUEL TYPE PLC-
PUMP RSC-24DC/21
#1 RSC-24DC/21
#3 RSC-24DC/21
#4 RSC-24DC/21
RELAY AUTOMATIC CLOSE TYPE PLC-
CIRCUIT BREAKER RSC-24DC/21
RELAY LOCKOUT GENERATOR TYPE PLC-
CIRCUIT BREAKER RSC-24DC/21
TYPE PLC-
YY0982 RELAY PMG INPUT #1 PHOENIX CONTACT UL: QVAJ7.E199827 X
RSC-24DC/21
TYPE PLC-
YY0984 RELAY CGCM #1 ENABLED PHOENIX CONTACT UL: QVAJ7.E199827 X
RSC-24DC/21
RELAY TRIP SHUTDOWN TYPE PLC-
SUMMARY CIRCUIT BREAKER RSC-24DC/21
P/N CLASS
MODEL
YY0144 RELAY 90% SPEED SAIA UL: NOIV7.E189693 X
KOP160J7
MODEL
YY0145 RELAY CGCM #1 FAULT SAIA UL: NOIV7.E189693 X
KOP160J7
RELAY MAIN UTILITY
MODEL
YY0986 AUXILLARY CIRCUIT SAIA UL: NOIV7.E189693 X
KOP160J7
BREAKER CLOSED
RELAY TRIP CONTROL MODEL
YY0142 SAIA UL: NOIV7.E189693 X
CIRCUIT BREAKER KOP160J7
RELAY CLOSE CONTROL MODEL
RELAY GENERATOR CLOSED MODEL
MODEL
YY0143 RELAY CONTROLLER ACTIVE SAIA UL: NOIV7.E189693 X
KOP160J7
RELAY POST LUBE NOT MODEL
REQUIRED KOP128J7
KESSLER-ELLIS MODEL
KI0131 RELAY NO FIRE DETECTED CSA: LR91109 2258-02 X
PRODUCTS KT966HC77
EXTERNAL CONNECTOR,
XP1100 MENCOM CORP RJ SERIES UL:NITW8.E183955 X
PROGRAMMING PORT
MG SERIES
POWER SUPPLY, AC/DC
JY0131 MAGNETEK MODEL MG3- UL: QQPX2.E211190 X
INPUT 24V DC OUTPUT
1G-1G-PM
MODULE, DC POWER SUPPLY
JS0010 ALLEN BRADLEY 1756-PB75 CSA: LR69960 2258-02 X
CONTROL/LOGIX
JS0110 MODULE, POWER SUPPLY BENTLY NEVADA 1701/10 CSA: LR26744 2258-02 X
JS0130 MODULE, POWER SUPPLY BENTLY NEVADA 1701/10 CSA: LR26744 2258-02 X
MODULE, POWER SUPPLY
JS0980 DETECTOR ELECTRONICS MODEL EQ3800 CSA: LR52532 4828-01 X
(EAGLE PREMIER)
PUMP BACKUP LUBE, DC
YLS0141 HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
MOTOR DRIVEN
PUMP AC MOTOR DRIVEN
YLS0152 HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
LIQUID FUEL PUMP
PRESSURE CONTROL VALVE
YLS0153 MAIN LUBE PRESSURE HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
CONTROL
YLS0191 TORCH COARSE ADJUST HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
REGULATOR
LIGHTED SWITCH,
YLS1110 R. STAHL 8018/3 UL: NWFN2.E182378 X
START/STARTING
LIGHTED SWITCH,
YLS1111 R. STAHL 8018/3 UL: NWFN2.E182378 X
STOP/STOPPING
YLS13 BACK PRESSURE LIQUID HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
FUEL CONTROL
YLS14 EXHAUST COLLECTOR HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
DRAINAGE
YLS19 EXHAUST COLLECTOR HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
DRAINAGE
YLS20 PRESSURE CONTROL, PILOT HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
AIR

P/N CLASS
YLS30 BUSSBAR PHYSICAL EARTH HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
YLS13 BACK PRESSURE LIQUID HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
FUEL CONTROL
YS0101 BUS BAR PHYSICAL EARTH R. STAHL 8003/1 UL: NWFN2.E182378 X
YS0110 TANK OIL STORAGE HONEYWELL SENSING SERIES AML21 UL:WOYR2.E12252 X
TANK ENGINE CLEANING
YS0111 HONEYWELL SENSING SERIES AML21 UL:WOYR2.E12252 X
SYSTEM TANK
TEMPERATURE ELEMENT PCD
YS0112 R. STAHL 8003/1 UL: NWFN2.E182378 X
AIR TEMPERATURE
TEMPERATURE ELEMENT GAS
PRODUCER THRUST BEARING
TEMPERATURE ELEMENT
SPARE
TEMPERATURE ELEMENT #2
YS0117 AND #3 BEARING COMMON HONEYWELL SENSING SERIES AML21 UL:WOYR2.E12252 X
DRAIN
TEMPERATURE ELEMENT
YS0124 ENGINE AIR INLET HONEYWELL SENSING SERIES AML20 UL:WOYR2.E12252 X
TEMPERATURE
TEMPERATURE ELEMENT
YS0154 GENERATOR BEARING HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
(DRIVEN END)
TEMPERATURE ELEMENT
YS0155 GENERATOR BEARING HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
(EXCITER END)
TEMPERATURE ELEMENT
YS0172 HONEYWELL SENSING SERIES AML21 CSA: LR004442 6241-10 X
GENERATOR WINDING A
TEMPERATURE ELEMENT
YS1112 GENERATOR WINDING A R. STAHL 8003/1 UL: NWFN8.E182378 X
(SPARE)
TEMPERATURE ELEMENT
GENERATOR WINDING B
TEMPERATURE ELEMENT
YS1117 GENERATOR WINDING B R. STAHL 8003/1 UL: NWFN8.E182378 X
(SPARE)
TEMPERATURE ELEMENT
GENERATOR WINDING C
TEMPERATURE ELEMENT
YS1154 GENERATOR WINDING C R. STAHL 8003/1 UL: NWFN8.E182378 X
(SPARE)
TEMPERATURE ELEMENT LUBE
OIL HEADER TEMPERATURE
ISOTHERMAL PLATE
REFERENCE COMPENSATION
TEMPERATURE ELEMENT GAS
FUEL TEMPERATURE
TEMPERATURE ELEMENT LUBE
SERIES
ZS0273 OIL TANK HEATER AROMAT CORP UL: WOYR2.E78925 X
AZ8104
TEMPERATURE
MICROPROCESSOR, CONTROL
ZU0010 ALLEN-BRADLEY 1756-L61 CSA: LR69960 2258-02 X
LOGIX CONTROLLER (5561)
PRESSURE TRANSMITTER
UF0050 ALLEN BRADLEY 1794-ACNR15 CSA: LR69960 2258-02 X
MONITOR AIR SUPPLY
PRESSURE TRANSMITTER GAS
VALVE CHECK
P/N CLASS
UF0070 PUMP CHECK, FUEL ALLEN BRADLEY 1794-ACNR15 CSA: LR69960 2258-02 X
TRANSFER
MONITOR PCD
LUBE OIL HEADER PRESSURE
PRESSURE TRANSMITTER GAS
FUEL PRESSURE
LIQUID FUEL PRESSURE
TRANSMITTER PRESSURE
UF0130 MONITOR INJECTOR PRESURE ALLEN BRADLEY 1794-ACNR15 CSA: LR69960 2258-02 X
DROP MAIN DIVIDER INLET
UF0180 FUEL CONTROL UPSTREAM ALLEN BRADLEY 1794-ACNR15 CSA: LR69960 2258-02 X
PRESSURE
PRESSURE DIFF
UF0200 TRANSMITTER PRESSURE ALLEN BRADLEY 1794-ACNR15 CSA: LR69960 2258-02 X
DIFF TRANSMITTER
LEVEL VALVE AUTOMATIC MODEL 1407-
ZAJ0140 ALLEN-BRADLEY UL: NRAG.E198348 X
DRAIN VALVE CGCM
INDUSTRIAL COMPUTER,
XGI1100 INTEGRATED DISPLAY ALLEN-BRADLEY 6183H-12FPDC UL: NWHC2.E224022 X
VERSAVIEW 1200H
INDUSTRIAL WORKSTATION, 6180W-15
XGI0190 ALLEN BRADLEY UL: NWGQ8.E136709 X
VERSAVIEW 1500W SERIES
MODULE, EAGLE QUANTUM
ZBU0980 DETECTOR ELECTRONICS MODEL EQ3800 CSA: LR52532 4828-01 X
PREMIER
EAGLE PREMIER, 8 CHANNEL
ZB0985 DETECTOR ELECTRONICS MODEL EQ3730 CSA: LR52532 4828-01 X
I/O MODULE
EAGLE PREMIER, 8 CHANNEL
ZB0986 DETECTOR ELECTRONICS MODEL EQ3730 CSA: LR52532 4828-01 X
I/O MODULE
HAND VALVE VENT, OIL
ZF0050 ALLEN BRADLEY 1794-OB8EP CSA: LR69960 2258-02 X
FILTER
HAND VALVE FILTER DRAIN,
DIRTY SIDE
HAND VALVE FILTER DRAIN,
CLEAN SIDE
HAND VALVE LOW POINT
ZF0053 ALLEN BRADLEY 1794-IB16 CSA: LR69960 2258-02 X
DRAIN, COOLER BYPASS
HAND VALVE BLEED LIQUID
ZF0054 ALLEN BRADLEY 1794-IE8 CSA: LR69960 2258-02 X
FUEL BOOST
HAND VALVE LIQUID FUEL
FILTER VENT
HAND VALVE LIQUID FUEL
FILTER VENT
HAND VALVE BLOCK AND
ZF0061 BLEED, LIQUID FUEL ALLEN BRADLEY 1794-OB8EP CSA: LR69960 2258-02 X
COALESCER
ZF0062 BLEED, LIQUID FUEL ALLEN BRADLEY 1794-OB8EP CSA: LR69960 2258-02 X
COALESCER
ZF0063 BLEED, LIQUID FUEL ALLEN BRADLEY 1794-IB16 CSA: LR69960 2258-02 X
FILTERS
ZF0064 HAND VALVE BLOCK AND ALLEN BRADLEY 1794-IE8 CSA: LR69960 2258-02 X
P/N CLASS
BLEED, GAS FUEL, VALVE
CHECK
ZF0070 BLEED, LIQUID FUEL PUMP ALLEN BRADLEY 1794-IJ2 CSA: LR69960 2258-02 X
DISCHARGE, PT7540
PRESSURE SAFETY VALVE
ZF0071 ALLEN BRADLEY 1794-OF4I CSA: LR69960 2258-02 X
PRE/POST PUMP RELIEF
PRESSURE SAFETY VALVE
1794-
ZF0072 PROTECT MAIN LIQUID FUEL ALLEN BRADLEY CSA: LR69960 2258-02 X
IF2XOF2I
PUMP
VALVE PRESS RELIEF LIMIT
ZF0073 ALLEN BRADLEY 1794-IRT8 CSA: LR69960 2258-02 X
PILOT GAS PRESSURE
FLOW VALVE FILTER
CHANGEOVER
RADIATION SENSOR MULTI-
SPECTRUM (FIRE)
1794-OB8EP 8 DISCRETE
OUTPUT CURRENT LIMITING
1794-IB16 16 DISCRETE
INPUT
ZF0086 1794-IE8 8 ANALOG INPUT ALLEN BRADLEY 1794-IE8 CSA: LR69960 2258-02 X
1794-
ZF0087 1794-IE8 8 ANALOG INPUT ALLEN BRADLEY CSA: LR69960 2258-02 X
IB10XOB6
ZF0091 ALLEN BRADLEY 1794-OB16P CSA: LR69960 2258-02 X
INPUT
ZF0121 1794-IE8 8 ANALOG INPUT ALLEN BRADLEY 1794-IB16 CSA: LR69960 2258-02 X
1794-IJ2 2 SPEED FAST
INPUT
1794-OF4I 4 ANALOG FAST
OUTPUT
1794-IF2XOF2I 4 ANALOG
ZF0181 SIGNALS 2 INPUT & 2 ALLEN BRADLEY 1794-IB16 CSA: LR69960 2258-02 X
OUTPUT
1794-IRT8 8 TC/RTD FAST
INPUT
INPUT
1794-IRT8 8 TC/RTD FAST 1794-
ZF0201 ALLEN BRADLEY CSA: LR69960 2258-02 X
INPUT IB10XOB6
1794-OB8EP 8 DISCRETE 1794-
ZF0202 ALLEN BRADLEY CSA: LR69960 2258-02 X
OUTPUT CURRENT LIMITING IB10XOB6
SZ1001 SOLAR TURBINES 1053832-xxx CSA: LR35592 2258-82 X
MODULE, CONTROL-NET
ZC0011 ALLEN BRADLEY 1756-CNBR CSA: LR69960 2258-02 X
BRIDGE
MODULE, CONTROL-NET
ZC0012 ALLEN BRADLEY 1756-CNBR CSA: LR69960 2258-02 X
BRIDGE
ZC0013 MODULE, ETHERNET/MODBUS PROSOFT TECHNOLOGY MODEL MVI56 UL: NRAG7.E183151 X
P/N CLASS
ControlLogix
MODULE, TRANSDUCER
ZC0110T BENTLY NEVADA 170180 CSA: LR26744 2258-02 X
INTERNAL KEYPHASOR
ZC0111 MODULE, MONITOR 1701/15 BENTLY NEVADA 1701/15 CSA: LR26744 2258-02 X
MODULE, TRANSDUCER
INTERNAL PROXIMITOR
MODULE, TRANSDUCER
INTERNAL PROXIMITOR
MODULE, TRANSDUCER
INTERNAL PROXIMITOR
MODULE, TRANSDUCER
INTERNAL PROXIMITOR
MODULE, TRANSDUCER
EXTERNAL KEYPHASOR
MODULE, TRANSDUCER
EXTERNAL PROXIMITOR
MODULE, TRANSDUCER
EXTERNAL PROXIMITOR
MODULE, TRANSDUCER
ACCELEROMETER
THE FOLLOWING COMPONENTS ARE LOCATED ON AND OFF THE SKID
CSA
MANUFACTURER CERTIFICATION
ISA TAGS DESCRIPTION MANUFACTURER/ COMPANY CERT DIV 1 DIV 2 ORDINARY COMMENTS REV
P/N
CLASS
HORN/STROBE FIRE
YA8001 CLIFFORD AND SNELL MODEL YL60 UL: UGKZ.E161818 X
WARNING
MOTOR PRE/POST LUBE FRAME SIZE
M6010 RELIANCE ELECTRIC CSA: LR19467 4228-81 X
PUMP MOTOR, AC 184T
MODEL 36
M6020 MOTOR BACKUP LUBE OIL BALDOR ELECTRIC FRAME SIZE UL: PTDR.E6951 X
182
FRAME SIZE
M6110 MOTOR SCAVENGING SUPPLY BALDOR ELECTRIC CSA: LR6771 4228-81 X
56
FRAME SIZE
M6111 MOTOR SCAVENGING SUPPLY RELIANCE ELECTRIC CSA: LR63415 4228-01 X
56
FRAME SIZE
M5005 MOTOR STARTER RELIANCE ELECTRIC CSA: LR19467 4228-01 X
405T
MOTOR MAIN FUEL PUMP FRAME SIZE
M7530 RELIANCE ELECTRIC CSA: LR19467 4228-81 X
DRIVE 254
LIGHT SOURCE
SL8001 R. STAHL MODEL 6408 CSA: LR09948 3428-03 X
FLUORESCENT

CSA
P/N
CLASS
LIGHT SOURCE
FLUORESCENT
LIGHT SOURCE
FLUORESCENT
LIGHT STROBE FIRE
YL8002 CLIFFORD AND SNELL MODEL YL60 UL: UGKZ.E161818 X
WARNING
FLOW CONTROL VALVE
PRECISION ENGINE MODEL HFG
FCV7065 ELECTRIC GAS FUEL CSA: LR43366 3228-01 X
CONTROLS 2.0
CONTROL VALVE
FLOW CONTROL VALVE
PRECISION ENGINE MODEL HFG
FCV7540 LIQUID FUEL CONTROL CSA: LR43366 3228-01 X
CONTROLS 2.0
VALVE
FLOW ORIFICE EQUALIZE PART OF ASSY
BZ1010 LIQUID FUEL SOLAR TURBINES 947363C6 CSA: LR35592 9098-01 X NOTE 1
DISTRIBUTION
SERIAL #:
FLOW ORIFICE FLAMEOUT 21371-01 &
GEN3000 KATO CSA 1881034 4228-01 X
TIME DELAY (GENERATOR) 21371-02
FLOW ORIFICE RESTRICT

SE1010 SOLAR TURBINES 190430-1 CSA: LR35592 9098-01 X
VENT BLEED
FLOW ORIFICE CLEANING
SE1011 FLUID INJECTION (ON- SOLAR TURBINES 190430-1 CSA: LR35592 9098-01 X
CRANK)
FLOW ORIFICE LIMIT
H6000 CHROMALOX SERIES TLO CSA: LR39591 2878-02 X
TORCH DRAIN
RELAY BACKUP COMMAND
SV7551 VERSA PRODUCTS MODEL VOE26 CSA: LR45277 3228-01 X
OFF
SV7552 RELAY AC PRE-POST PUMP VERSA PRODUCTS MODEL VOE26 CSA: LR45277 3228-01 X
RELAY LUBE OIL HEADER S301XH16V3BC
SV7545 GC VALVES UL: YTSX.E157477 X
PRESSURE HIGH 3E
RELAY VENTILATION
SV1026 VERSA PRODUCTS MODEL VOE53 UL: VAPT.E37068 X
REQUIRED (FANS #1 & #2)
RELAY VENTILATION
REQUIRED (FANS #3 & #4)
SV7060 RELAY LUBE PUMP INHIBIT VERSA PRODUCTS MODEL VOE26 UL: VAPT.E37068 X
RELAY BACKUP LUBE OIL
PUMP OFF
SV7050 RELAY CONTROLLER ACTIVE VERSA PRODUCTS MODEL VOE26 UL: VAPT.E37068 X
SV7055 RELAY CONTROLLER ACTIVE BIFOLD MODEL FP10P CSA: LR215681 3228-81 X
SV7550 RELAY CONTROLLER ACTIVE VERSA PRODUCTS MODEL VOE26 CSA: LR45277 3228-01 X
S301XH16V3BC
SV7542 RELAY CONTROLLER ACTIVE GC VALVES UL: YTSX.E157477 X
3E
RELAY GROUND FUSE BLOWN S301XH16V3BD
SV7561 GC VALVES UL: YTSX.E157477 X
ALARM 5E
RELAY NO EMERGENCY
SHUTDOWN SUMMARY
RELAY NO EMERGENCY
SHUTDOWN SUMMARY
RELAY NO EMERGENCY
SHUTDOWN SUMMARY

CSA
P/N
CLASS
RELAY NO EMERGENCY
SHUTDOWN SUMMARY
SOLENOID VALVE BLEED
TE6063 VALVE DIRECTIONAL ROSEMOUNT SERIES 78 CSA: LR33332 2258-02 X
CONTROL
SOLENOID VALVE GUIDE SOLAR TURBINES
NOTE 1
TE1010 VANE ACTUATOR ASSEMBLY MANUFACTURED S306 SERIES CSA: LR26165 9098-01 X
DIRECTIONAL, CONTROL BY MINCO
SOLAR TURBINES
SOLENOID VALVE GAS NOTE 1
TE1011 ASSEMBLY MANUFACTURED S306 SERIES CSA: LR26165 9098-01 X
TORCH SHUTOFF, PILOT
BY MINCO
SOLENOID VALVE PRIMARY
TE6062 GAS FUEL PILOT SHUTOFF ROSEMOUNT SERIES 78 CSA: LR33332 2258-02 X
VALVE
SOLENOID VALVE GAS FUEL
TE1000 ROSEMOUNT SERIES 78 CSA: LR33332 2258-02 X
VENT, PILOT
SOLENOID VALVE PRIMARY
RELEASE #1
SOLENOID VALVE EXTENDED
TX1500 SOLAR TURBINES 1020458-3 CSA: LR35592 9098-01 X NOTE 1
RELEASE #1
LEVEL INDICATOR LUBE
OIL TANK LEVEL
TIMER/COUNTER ENGINE
HOUR/START COUNTER
TIMER/COUNTER ENGINE
HOUR/START COUNTER
PUMP MAIN LUBE OIL PART OF
TE6002 PART OF H6000 PART OF H6000
PUMP, ENGINE DRIVEN H6000
PUMP PRE/POST LUBE, AC
MOTOR DRIVEN
SWITCH, ENCLOSURE AC PART OF ASSY
ZS8001 R. STAHL UL:NWFN.E182378 X
LIGHTS 8125/5…-…
SWITCH, BACKUP LUBE
PS6060 PUMP ACTIVATION (PLC ITT AEROSPACE 057-0771 CSA: LR34146 6248-01 X
FAIL)
SWITCH PUSHBUTTON
PS6010 MOMENTARY INDICATOR ITT AEROSPACE 057-0771 CSA: LR34146 6248-01 X
GAS/LIQUID FUEL SELECT
SWITCH PUSHBUTTON
VOLTAGE INCREASE
SWITCH PUSHBUTTON
VOLTAGE DECREASE
SWITCH PUSHBUTTON
ISOCH/DROOP SELECT
SWITCH PUSHBUTTON
PDS1020 ILLUMINATED ITT AEROSPACE 057-0771 CSA: LR34146 6248-01 X
START/STARTING
SWITCH PUSHBUTTON
PRS8010 ILLUMINATED TOPWORX MODEL 7G CSA: LR24226 3218-06 X
STOP/STOPPING
SWITCH PUSHBUTTON
PRS8020 MOMENTARY INDICATOR TOPWORX MODEL 7G CSA: LR24226 3218-06 X
SPARE
CSA
P/N
CLASS
SWITCH PUSHBUTTON
SPARE
SWITCH PUSHBUTTON
SPARE
SWITCH PUSHBUTTON
SPARE
SWITCH PUSHBUTTON
SPARE
SWITCH KEY 3 POSITION
PRS8040 TOPWORX MODEL 7G CSA: LR24226 3218-06 X
OFF/LOCAL/AUXILIARY
SWITCH PUSHBUTTON
MOMENTARY START
SWITCH PUSHBUTTON
MOMENTARY NORMAL STOP
SWITCH PUSH TO STOP
PDS8001 DWYER INSTRUMENTS 1950 SERIES CSA: LR42749 3238-01 X
EMERGENCY STOP
SWITCH PUSHBUTTON
PDS8002 DWYER INSTRUMENTS 1950 SERIES CSA: LR42749 3238-01 X
MOMENTARY LAMP TEST
PS8006 SWITCH PUSHBUTTON RESET ITT AEROSPACE 057-0771 UL: WSQX7.E56677 X
SWITCH PUSHBUTTON
TS8001 KIDDE-FENWAL TYPE 27121 UL: UIRV.E19310 X
MOMENTARY ACKNOWLEDGE
TS8002 KIDDE-FENWAL TYPE 27121 UL: UIRV.E19310 X
BACKUP SYSTEM RESET
SWITCH PUSHBUTTON
TS8003 MOMENTARY SPEED/LOAD KIDDE-FENWAL TYPE 27121 UL: UIRV.E19310 X
INCREASE
SWITCH 3 POSITION
TE1501 (RETURN TO CENTER) SOLAR TURBINES 1064444 CSA: LR35592 9098-01 X NOTE 1
VOLTAGE
SWITCH 3 POSITION
TE1510 (RETURN TO CENTER) SOLAR TURBINES 1064444 CSA: LR35592 9098-01 X NOTE 1
SPEED/LOAD
SWITCH PUSHBUTTON
TE1511 SOLAR TURBINES 1064444 CSA: LR35592 9098-01 X NOTE 1
MOMENTARY HORN SILENCE
TE1512 FIRE SYSTEM SOLAR TURBINES 1064444 CSA: LR35592 9098-01 X NOTE 1
AUTO/INHIBIT
SWITCH PUSHBUTTON
TE1502 W/LOCK EXCLUSION MANUAL SOLAR TURBINES 1064444 CSA: LR35592 9098-01 X NOTE 1
RELEASE
SWITCH LIMIT CONSOLE
LIGHTING
SWITCH LIMIT CONSOLE
LIGHTING
SWITCH SELECTOR 2-
TE1505 POSITION (ON-OFF) AC SOLAR TURBINES 1064444 CSA: LR35592 9098-01 X NOTE 1
LIGHTING
PRESSURE SWITCH BACKUP
TE1506 LUBE PUMP ACTIVATION, SOLAR TURBINES 1064444 CSA: LR35592 9098-01 X NOTE 1
PLC FAILURE
PRESSURE SWITCH AC
PRE/POST PUMP CHECK

CSA
P/N
CLASS
PRESSURE SWITCH BACKUP
PUMP LOW PRESSURE TEST
PRESSURE SWITCH
TE1509 SCAVENGE PUMP CHECK, SOLAR TURBINES 1064444 CSA: LR35592 9098-01 X NOTE 1
PS6111
PROXIMITY SWITCH SITRANS
LT6000 SIEMENS MILLTRONICS CSA: LR113425 2258-02 X
ENCLOSURE DOOR MODEL LC 300
PROXIMITY SWITCH
PT7541 ROSEMOUNT MODEL 3051 CSA: LR33332 2258-02 X
ENCLOSURE DOOR
PROXIMITY SWITCH
ENCLOSURE DOOR
PROXIMITY SWITCH
ENCLOSURE DOOR
PROXIMITY SWITCH
ENCLOSURE DOOR
PROXIMITY SWITCH
ENCLOSURE DOOR
PROXIMITY SWITCH
ENCLOSURE DOOR
PROXIMITY SWITCH
ENCLOSURE DOOR
PROXIMITY SWITCH
ENCLOSURE DOOR
PRESSURE DIFF SWITCH
ENCLOSURE VENT FAN FAIL
ENCLOSURE VENT FAN FAIL
PRESSURE SWITCH C02
PDT6000 ROSEMOUNT MODEL 3051 CSA: LR33332 2258-02 X
RELEASE CONFIRM
TEMPERATURE SWITCH
THERMAL DETECTOR
TEMPERATURE SWITCH
THERMAL DETECTOR
THERMAL SWITCH THERMAL
DETECTOR
VE1063 BENTLY NEVADA SERIES 3300 CSA: LR26744 2258-02 X
ENCLOSURE VENT FILTER
VIBRATION SWITCH LUBE
VE1010 OIL COOLER FAN BENTLY NEVADA SERIES 3300 CSA: LR26744 2258-02 X
VIBRATION
TEMPERATURE ELEMENT T5
THERMOCOUPLE
THERMOCOUPLE
THERMOCOUPLE
THERMOCOUPLE
THERMOCOUPLE
THERMOCOUPLE
THERMOCOUPLE
VE2665 BENTLY NEVADA TYPE 330425 CSA: LR26744 2258-03 X
THERMOCOUPLE
CSA
P/N
CLASS
SPEED CONTROLLER POWER
RE8001 DETECTOR ELECTRONICS MODEL PIRECL CSA: LR52532 4828-01 X
FLEX 700H
HAND VALVE VENT, OIL
RE8002 DETECTOR ELECTRONICS MODEL PIRECL CSA: LR52532 4828-01 X
FILTER
3300XL
VA1011 BENTLY NEVADA SERIES MODEL CSA: LR26744 2258-04 X
INPUT
330180-XX-XX
3300XL
INPUT
330180-XX-XX
3300XL
INPUT
330180-XX-XX
3300XL
VA1030 1794-IE8 8 ANALOG INPUT BENTLY NEVADA SERIES MODEL CSA: LR26744 2258-04 X
330180-XX-XX
3300XL
VA1031 1794-IE8 8 ANALOG INPUT BENTLY NEVADA SERIES MODEL CSA: LR26744 2258-04 X
330180-XX-XX
QE8001 DETECTOR ELECTRONICS MODEL PIRECL CSA: LR52532 4828-01 X
INPUT
1794-OB16P 16 DISCRETE
QE8011 DETECTOR ELECTRONICS MODEL PIRECL CSA: LR52532 4828-01 X
OUTPUT

SECTION: 10.02
ELECTRICAL DEVICE LIST

YTSX.E157477 - Valves, Electric for Use in Hazardous Locations Page 1 of 2
"# $! %&'(''
67 / 8
!% &9
% 8 % - &: & ; ; < %"= ; %
) * **
< 9
,
9 < ,19
. ,
9
09-. 3 . ) )< .
! !
" ! # $ % &' ( ' $ % &
) ) ( * ) ( ) )) )* # + , - ) . / ) * )
* * * $ % &. ' ' ' ) $ % &
) " ) " ( * ) ( ) )) )* + , - ) . / ) * ) *
* * $ % &. ' ' ' ) $ % &
) 0 ( * ) # - ) . / ) * ) * * * $ % &.
' ' ' ) $ % &
) 0 " ( * ) ( ) )) )* # + , - . / ) * ) *
* * $ % &' ' ' ) $ % &
" 0 ) * ( ) )) )* # + 1 ,- 2 3 /
! ! !* # $ % &. ' ' $ % &
! 0 " *
+ , ! " # ! ! ! # $ % &' ( ' $ % &
) ) ( * ) ( ) )) )* 1 ) . / ) * ) *
* * $ % &. ' ' ' ) $ % &
) " ) " ( * ) ( ) )) )* 1 ) . / ) * ) * *
* $ % &. ' ' ' ) $ % &
) 0 ) 0 ( * ) ) . / ) * ) * * * $ % &.
' ' ' ) $ % &
) ) ( * ) ( ) )) )* # + 1 , - ) . / ) * )
* * * $ % &. ' ' ' ) $ % &
) " ) " ( * ) ( ) )) )* + 1 , - ) . / ) * )
* * * $ % &. ' ' ' ) $ % &
) 0 ) 0 ( * ) # - ) . / ) * ) * * *
$ % &. ' ' ' ) $ % &
) ) 4 " ) 4 " ) ) 4 " ) 4 " ( * ) ( ) )) )* + 1 , ) . /

) * ) * * * - - -) - -* - 2 2) 2* $ % &. ' ' ' ) $ % &
5
) " 0 ( * ) ( ) )) )* # + 1 , - . / ) * )
* * * $ % &' ' ' ) $ % &
) ) ) ) ) ) ) ) ) ) ( * ) ( ) )) )* #
- ) . / ) * ) * * * - - -) - -* - 2 2) 2* $ % &. ' '
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=YTSX.E157477&... 8/14/2006
YTSX.E157477 - Valves, Electric for Use in Hazardous Locations Page 2 of 2
' ) $ % & 5
) ) " ) " ) " ) " ) ) " ) " ) " ) " ( * ) ( ) )) )*

- ) . / ) * ) * * * - - -) - -* - 2 2) 2* $ % &. ' '
' ) $ % & 5
) ) 0 ) 0 ) 0 ) 0 ) ) 0 ) 0 ) 0 ) 0 ( * ) # - )
. / >1 ) * ) * * * - - -) - -* - 2 2) 2* $ % &. ' ' ' )
$ % & 5
))) 4 4 " 0 ( - . / ) $ % &0

$ % &
" 0 ( * ( ( ) )) )* # + 1 ,- 2 3 /
! ! !* # $ % &. ' ' $ % &
) " 0 ( ( - ) / $ % &# 1 $ % &
5 0 ?@ ?: &: ( 7( % 8 &&?;& $
<$ % )4 4
J % K ; ;& 8 67 ,$
$? 7( A <% B @ 9
%;C
,( $$ %; ; 8$ %?D % 8 $ ; % ( @ % % & ( $ ; % ( : @ %8 % ; % <D

&& B4<$ :; >%&? ( $ ; @ %7 ( < 0 E ( & @ ;% @ % ;: % < D && B4<$ :; .&B ? & E
( 0 E % ( $ ;
< $ 8 ( $ ; % ( 8 & ;% % % ( >%& % ; % ; ? @F; ( && B%7; % % G ,( ! 9

% 8 %
7% % H %7 & 8 @ $ % % ( % ? % % % %48 & %78 %% B ( %?8 % $ & % ( B%7
,( 8 % I1 $ % 8 ( >%& % ; % ; ?B ( $ 8 % 8 <% B @ 9%;I 8 $$ F; % (
; 8 & 9 % % ( $ % 8 &8 %;& ; $? 7( % ; % ( && B%7 8 GI $? 7( A <% B
@ 9%;CI
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=YTSX.E157477&... 8/14/2006
WOYR2.E12252 - Switches, Special Use - Component Page 1 of 51
UL Online Certifications Directory
WOYR2.E12252
Switches, Special Use - Component
Page Bottom
Switches, Special Use - Component
See General Information for Switches, Special Use - Component
HONEYWELL SENSING & CONTROL, DIV OF HONEYWELL INC E12252

11 W SPRING ST
FREEPORT, IL 61032 USA
Cat. No. Electrical Rating Code
AML21, f/b B, C, E, F, G, H, J, K, L173 or L203
L, M, N, P, R or S, f/b B, G
or W, f/b A, B, C or E, f/b
2 or 3, f/b A, B, C or E, f/b
A thru D, ww/o letters and/or
numbers, f/b L173 or L203.
AML21B100, -B101, -C100 thru -C105, L173
-E100, -E101, -E102, -G100,
-G101 and -G102, f/b L173.
AML21BBA2CD-001 f/b L173 and L203. L173 and L203
AML22 f/b C, H, J, K, L or M, L173 or L203
f/b B, G, or W, f/b B, C, D,
E, F, H, J, K, L, M, R, S, T,
W or X, f/b 2, 3, 8 or 9,
f/b A thru E, f/b A thru D,
ww/o letters and/or numbers,
f/b L173 or L203.
AML22, f/b -C100 thru -C105, f/b L173 L173
AML23, AML24 f/b E, F or G, L173 or L203
f/b B, G or W, f/b A, B, C or
E, f/b 2 or 3, f/b A thru E,
f/b A or C, f/b 01 thru 08,
f/b L173 or L203.
AML25, AML26 f/b F or G, f/b B, L173 or L203
G or W, f/b B thru G, f/b 2,
3, 8 or 9, f/b A thru E, f/b A,
f/b 01 thru 08, f/b a single or
double combinations of letters
G, R, X or Y, ww/o letters and/or
numbers, f/b L173 or L203
AML27 f/b A, f/b B, f/b K, f/b 2 L173 or L203
or 3, f/b AA, AC, BA, BC, EA
or EC, f/b 21 thru 31, f/b two
letters, ww/o letters and/or
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=WOYR2.E12252&ccnshorttitle=... 3/30/2006
AML31 f/b E, F, H, K, L or R, f/b L93
B, G, or W, f/b A, B, C or E,
f/b 4, f/b A, f/b A thru D,
f/b L93
AML32 f/b F or L, f/b B, G or W, L93
f/b B thru H, K, L, M or P,
f/b 4 or 7, f/b A, f/b A thru
D, ww/o letters and/or numbers,
f/b L93
AML32F100-L93 L93
AML33 or AML34, f/b E or F, f/b B, L186 or L205
G or W, f/b A, B, C or E, f/b
4, f/b A, f/b A or C, f/b 01,
ww/o letters and/or numbers, f/b
L186 or L205.
AML35 or AML36, f/b F, f/b B, G or L186 or L205
W, f/b B, C, F, M or P, f/b 4
or 7, f/b A, f/b A or C, f/b
01, ww/o letters and/or
numbers; f/b L186 or L205.
B-(Refer to BZ Series for details) —
BA f/b -3R, ww/o B, D, L, N, P, L23, L178, L224 or L225
Q, T, V or X, ww/o numbers,
ww/o A, B, D or P with numbers,
ww/o T, f/b L23, L178, L224
or L225
BA, OPA, WA or YA ww/o D, F or T, L17 or L33
f/b -R or 1R, ww/o B, D, K,
L, M, N, Q, S, T, V, W or X,
ww/o numbers, ww/o A, B, D or
P with numbers, ww/o T, f/b
L17 or L33
BA, OPA, WA or YA, ww/o D, F or T, L22, L160, L224 or L225
f/b -R, -1R, -2R, -3R or -5R,
ww/o B, D, K, L, N, Q, R, T,
V or X, ww/o numbers, ww/o A,
B, D or P, ww/o numbers, ww/o
T, ww/o RH or LH, f/b L22,
L160, L224 or L225.
BA, OPA, WA or YA ww/o D, F or T, L23, L97, L145, L224 or L225
ww/o numbers, f/b -2R, -3R or
-5R, ww/o B, D, L, N, P, Q,
T, V or X, ww/o numbers, ww/o
A, D or P with numbers, ww/o
L97, L145, L224 or L225
BA-5R276-A2-L272 L272
BA, WA or YA f/b letters and L15 or L19
BA, WA or YA, ww/o 1 or 2, f/b A, L65 or L208
B, D, L, M, N, P, Q, R, T, V
or X, ww/o numbers, f/b L65
or L208
BA, WA or YA f/b -2R54 or -2, L50
ww/o A, B, D, L, M, N, P, Q,
R, S, T, V or X, ww/o
numbers, f/b L50
BF f/b A, B, L or R, f/b 1 thru 4, L142, L156
f/b A, B or S, f/b L, P, or L162
R or W, f/b 1 thru 4
BM, WM and YM, ww/o D, E, E6, F, G, L102, L161,
H, T, V or V6, ww/o 1 or 2, f/b L167 or L316
-1R, ww/o D, L, M, N, Q, S, T
or W, ww/o numbers, ww/o A, AR, B,
D or P with numerals, f/b L102,
L161, L167 or L316
BM-R252-L167 L167
BM, WM and YM, ww/o D, E, E6, F, G, L101, L161,
H, T, V or V6, f/b -2R, ww/o L167, L174
A, B, D, L, M, N, Q, S, T, V or L268
D or P with numerals, f/b
L101, L161, L167, L174 or L268.
BM, WM, YM, ww/o D, E, EG, F, G L82, L167
H, T, V or V6, ww/o 1, f/b A, B, D, E
L, M, N, P, Q, R, S, W, X or a
combination of these letters
ww/o numbers, w/wo A, AR, B, D, P, PC,
ww/o numbers, f/b L82 or L167.
B, BZ, G, R, WZ or YZ, ww/o D, E, L8, L35, L96 or L233.
E6, F, G1, G2, H1, H2, T, V or
V6, ww/o -1 or -2, f/b D, E, F,
L, M, N, Q, R, S, T, W or X, or
a combination of these letters,
ww/o numerals, ww/o hyphenated
letter A, B, D, K, P, PC, PP or
T, or TC without a hyphen, ww/o
numerals, ww/o -S, ww/o BP, C,
D, F, JH, P, R, RNC, RNO, S or
WP, ww/o numerals, f/b L8, L35,
L96, or L233.
B, BZ, G, R, WZ or YZ ww/o D, E, L9 or L233
E6, F, G1, G2, H1, H2, T, V or
V6, ww/o -1, -2, -3 or -7, f/b
D, L, M, N, Q, S, T, W or X, or
combination of these letters,
T or TC without a hyphen, ww/o
WP, f/b L9 or L233
B, BZ, G, R, WZ or YZ, ww/o D, E, L22 or
E6, F, G1, G2, H1, H2, T, V L279
or V6, w/wo -1, -2, -3 or -7,
f/b D, L, M, N, Q, R, S, T or
W, or a combination of these
letters, ww/o numerals, ww/o
hyphenated letter A, B, D, K,
P, PC or PP, or T without a
hyphen, ww/o numerals; ww/o
-S, f/b L22 or L279.
E6, F, G1, G2, H1, H2, T, V
or V6, f/b hyphenated letter
D, L, M, N, Q, R, S, T, W or
X, or a combination of these
P, PC, PP or T, or TC without
a hyphen, ww/o numerals, ww/o
-S, f/b L67 or L144. (Note:
The letter X may appear
anywhere after the first
hyphen)
B, BZ, G, R, WZ or YZ, ww/o D, E, E6, L95 or L169
F, G1, G2, H1, H2, T, V or V6, ww/o
-1, -2, -3 or -7, f/b D, L, M, N, Q, R,
S, T or W, or a combination of these letters,
ww/o numerals, ww/o hyphenated letter A,
B, D, K, P, PC or PP, or T without a hypen,
ww/o numerals, ww/o -S, f/b
L95 or L169.
E6, F, G1, G2, H1, H2, T, V or V6, f/b
-1, -2, -3, or -7, f/b D, L, M, N, Q, R,
S, T, W or X, or a combination of these
letters, ww/o numerals, ww/o hyphenated letter
A, B, D, K, P, PC, PP or T, or TC without a
hyphen, ww/o numerals, ww/o -S, ww/o
BP, C, D, F, JH, P, R, RNC, RNO
or S, ww/ numerals, f/b L96 or L233
B, BZ, G, R, WZ or YZ ww/o D, E, E6, F, L103 or L233
G1, G2, H1, H2, T, V or V6, f/b -1, -2 or
-3, f/b D, L, M, N, Q, R, S, T or W, or a
combination of these letters, ww/o numerals,
ww/o hyphenated letter A, B, D, K, P, PC or PP, or
T without a hyphen, ww/o numerals, ww/o
-S, ww/o BP, C, D, F, JH, P, R, RNC,
RNO or S, ww/o numerals, f/b L103 or L233
BZ ww/o D, E, E6, F, G1, G2, H1, H2, T, L9
V or V6, f/b -2F or -2G, ww/o D, L, M,
N, Q, S, T or W, or a combination of these
letters, ww/o numerals, ww/o hyphenated
letter A, B, D, K, P, PC or PP, or T
without a hyphen, ww/o numerals,
ww/o -S, f/b L9
BZ-R241 or BZ-R2418-A2 L4
f/b L4
BZ-R814-PP1-L189 L189
BZ-RW843515 or BZ-R214 L169
f/b L169
BZ, WZ or YZ ww/o D, E, E6, F, L4 or L121
G1, G2, H1, H2, T, V or V6,
f/b -Y, -2Y, -3Y or -7Y,
f/b D, K, L, M, N, Q, S, T,
W or X or a combination of
these letters, ww/o numerals,
f/b hyphenated letter A, B,
D, K, P, PC, PP or T or TC
without a hyphen, ww/o
numerals, f/b L4 or L121
BZ, WZ or YZ ww/o D, E, E6, F, L4, L34 or L130
G1, G2, H1, H2, T, V or V6,
ww/o -1, -2, -3 or -7,
f/b D, L, M, N, Q, S, T,
or W, or a combination of
ww/o hyphenated letter A, B,
D, K, P, PC, PP or T,
ww/o -S, f/b L4, L34 or L130
BZ, WZ or YZ ww/o D, E, E6, F, L35
G1, G2, H1, H2, T, V or V6,
f/b -2, -3 or -7,
f/b D, L, M, N, Q, R, S, T,
W or X, or a combination of
D, K, P, PC or PP or T,
numerals, ww/o -S, f/b L35
BZ, WZ or YZ ww/o D, E, E6, F, L65, L96, L103,
G1, G2, H1, H2, T, V or V6, L111 or L147
f/b hyphenated letter
D, E, L, M, N, Q, R, S, T
D, K, P, PC, or T, or TC
L96, L103, L111 or L147
BZ, WZ or YZ ww/o D, E, E6, F, L73 or L180
G1, G2, H1, H2, T, V or V6,
f/b -2A or -3A, f/b D, L, M,
N, Q, S, T or W, or a
letter A, B, D, K, P, PC, PP,
or T without a hyphen, ww/o
numerals, ww/o -S, f/b L73 or
L180
BZ, WZ or YZ ww/o D, E, E6, F, G1, L74, L270 or L271
G2, H1, H2, T, V or V6, f/b
-2, -3 or -7, f/b D, L, M, N,
Q, R, S, T or W, or a
letter A, B, D, K, P, PC or
PP, or T without a hyphen,
L74, L270 or L271
BZ, WZ or YZ f/b -2, f/b D, L, M, L87
N, Q, R, S, T or W, or a
L87
BZ, WZ or YZ ww/o D, E, E6, F, G1, L197 or L233
G2, H1, H2, T, V or V6, f/b
-7, f/b D, L, M, N, Q, R, S,
T or W, or a combination of
D, K, P, PC or PP, or T without
-S, f/b L197 or L233
BZ, WZ or YZ ww/o D, E, E6, T, V L148
or V6, f/b -1 or -2, f/b D, L,
M, N, Q, R, S, T, W or X, or a
PP, or T without a hyphen, ww/o
DC, DO, or DT, ww/o D, E, E6, F2, L59 or L120
G1, G2, H1, H2, T, V or V6,
f/b -2R or -3R, ww/o D, L, M,
N, Q, S, T or V, ww/o numerals,
ww/o -A, -B, -D or -PC, ww/o
-LH or -RH with numerals,
f/b L59 or L120
G-(Refer to BZ Series for details) —
MC, MO or MT ww/o suffix D, E, E6, L20, L168 or L210
F, G1, G2, H1, H2, T, V or
V6, f/b -4R, ww/o letter B,
L, Q, N, S or V, ww/o numerals,
ww/o additional letters A, B,
D or P, with numerals, f/b
L20, L168 or L210
MML21 f/b E, B, K or H, f/b A, K, L22
L, M, N, P or W, f/b 2 or 3, f/b
AA thru AD, f/b A, K, L or W,
ww/o GH, GS, RH, RS, XX, YH or
YS, ww/o DG, DR, DY, LB, LG, LK,
LR, LW or LY, ww/o 20, ww/o -000
thru -999, f/b L22
MML21 f/b E, B, K or H, f/b A, K, L222
BA thru BD, f/b A, K, L or W,
LR, LW or LY ww/o 20, ww/o -000
thru -999, f/b L222
MML21LC f/b 2, 2DG, 2DR, 2DY, 2LB, L222
2LG, 2LR, 2LW, 2LY, 2RA, DG, DR,
DY, LB, LG, LR, LW, LY or RA,
f/b L222
MML23 f/b E or K, f/b A, K, L, M, L22 or L222
N, P or W, f/b 2 or 3, f/b AA,
AC, BA or BC, f/b 01 thur 07,
f/b K or W, ww/o 20, ww/o -000
thru -999, f/b L22 or L222
MML24 f/b E or K, f/b A, K, L, M, L22 or L222
AC, BA or BC, f/b 01 thru 07,
f/b F, G, H, K, M, P, R or W,
ww/o DG, DR, DY, LB, LG, LK, LR,
LW, LY or XX, ww/o DG, DR, DY,
LB, LG, LK, LR, LW, LY or XX,
ww/o 20, ww/o -000 thru -999,
f/b L22 or L222
MML31 f/b E or K, f/b A, K, L, M, L223
N, P or W, f/b 2 or 3, f/b AA
thru AD, f/b K, L or W, ww/o
LB, LG, LK, LR, LW or LY,
w/wo 20, f/b L223
MML33 f/b E, F, G, H, K, M, N or L223 or L243
P, f/b A, B, C, K, L, M, N, P
or W, f/b 2 or 3, f/b AA or AC,
f/b 01, 02, 04, 05 or 07, f/b
K or W, ww/o 20, f/b L223 or
L243
MML34 f/b E, F, G, H, K, M, N or P, L223 or L243
f/b A, B, C, K, L, M, N, P or
W, f/b 2 or 3, f/b AA or AC,
f/b 01, 02, 04, 05 or 07, f/b
F, H, K, P, R or W, ww/o NC,
NR, NY or XX, ww/o NC, NR,
NY or XX, ww/o A, B or X,
ww/o 20, f/b L223 or L243
MML82 f/b E or K, f/b E or K, f/b L22 or L222
2 or 3, f/b AA thru AD, BA
thru BD, CA thru CD or DA thru
DD, f/b L22 or L222
MML83 f/b E or K, f/b E or K, f/b L223
2 or 3, f/b AA thru AD, f/b
L223
MML88 f/b E, K or L, f/b 2 thru L22, L222 and L223
10, f/b A thru H or J, f/b 1,
2 or 3
OP, Types AL, ALH, AR, ARH, CL, CLH, L1, L2, L4
CR, CRH, L, LH, M, MH, N, NH, L96 or L103
P, PH, PM, PMH, Q, QH, R or
RH, ww/o numbers, f/b L1, L2,
L4, L96 or L103
OPD, Types AL, ALM, AR, ARH, CL, CLH, L10 or L59
CR, CRH, L, LH, M, MH, N, NH,
P, PH, PM, PMH, Q, QH, R and
RH may or may not be f/b
R-(Refer to BZ Series for details) —
SM Series with Prefix Nos. 1, 5, L4, L22, L119,
11, 12, 21, 22, 23, 51, 101, L149, L150, L151
111, 112, 121, 122, 151, 301, L166, L171, L172,
302, 311, 312, 322, 368, 401, L184 or L249
411, 412, 421 or 422 with
Sufix Nos. 1 thru 10,000, ww/o
designation H, S or T, ww/o
numbers, f/b L4, L22, L119,
L149, L150, L151, L166, L171,
L172, L184 or L249
SM7601 ww/o numbers/letters, L185
f/b L185 with Prefix No. 11
V3- or V3L- f/b 1 thru 99, 201 L22, L29, L83, L86, L112, L116,
thru 299, 401 thru 499, 601 L118, L156, L251 or L259
thru 699, 1001 thru 1099, 1301
thru 1399 or 1601 thru 1699#,
f/b L22, L29, L83, L86, L112,
L116, L118, L156, L251 or L259
V3- or V3L- f/b 101 thru 199, 301 L22, L29, L112, L116, L156,
thru 399, 500 thru 599, 701 L206 or L291
thru 799 or 1701 thru 1799#,
f/b L22, L29, L112, L116, L156,
L206 or L291
V3- or V3L- f/b 101E thru 199E or L29 or L112
301E thru 399E#, f/b L29 or
L112
Note: #Followed by 1, 2 or 3, f/b 0 thru 4, 7, 8, 9 or A, f/b D8, D9 , E7, E8, E9, P01 thru P99 or S6, ww/o numbers and/or letters.
V3-368-D8-L109; V3-368-D9-L109 L109
V3- or V3L- f/b 601E thru 699E#, L29, L112 or L156
f/b L29, L112 or L156
V3- or V3L- f/b 676-D8-L109 L109
V3-1055-L206 L206
V3- or V3L-, f/b 1101 thru 1199, L22, L29, L93, L112, L116, L131
1201 thru 1299, 1401 thru 1499, or L156.
1501 thru 1599 or 1801 thru
1899#, f/b L22, L29, L93, L112,
L116, L131 or L156.
V3- or V3L-, f/b 1101E thru 1199E, L29, L112 or L131
1201E thru 1299E, or 1501E thru
1599E#, f/b L29, L112, or L131.
V3- or V3L-, f/b 1901 thru 1999#, L86, L113 or L259
f/b L86, L113 or L259.
V3-1909-D8-L228. L228
V3-1911, f/b -D8A2, -D8A7, -D89 or L186
-D884, f/b L186; V3-1914-D882
-L186 or V3L-1949-L186.
V3-, f/b 1981 or 1983, f/b -D8, f/b L86, L113 or L259
L86, L113 or L259.
V3L-2100-L201 L201
V3- or V3L-, f/b 2101 thru 2199 or L22, L29, L99, L131 or L201
2201 thru 2299# or 2301 thru 2399#,
f/b L22, L29,
L99, L131 or L201.
V3-2100-D963-L216 L216
V3-or V3L- f/b 2401 thru 2599#, f/b L22, L22, L109, L162,
L109, L162, L163 or L200 L163 or L200
V3L-2453-D8-L200 L200
V3-or V3L- f/b 2401E thru 2499E#, L109 or L182
f/b L109 or L182.
V3- or V3L- f/b 3001 thru 3099, 3101 L22, L29, L83, L86,
thru 3199, 3201 thru 3299 L112, L116, L118, L163,
or 3301 thru 3399#, f/b L22, L29, L215, L250 or L259
L83, L86, L112, L116, L118, L163,
L215, L250 or L259
V3- or V3L- f/b 3001E thru 3099E#, L83 or L176
f/b L83 or L176
V3- or V3L- f/b 4001 thru 4099#, L22 or L135
f/b L22 or L135
Note: #With or without additional suffix letters and/or numbers.
V3- or V3L- f/b 4501 thru 4599#, L226
f/b L226
V3- or V3L- f/b 41001 thru 41999#, L232
f/b L232
V3- or V3L- f/b 70001 thru 74999#, L109 or L251
f/b L109 or L251
V3L-73317-D8-L22 L22
Note: #With or without additional suffix letters and/or numbers.
V3L-70009-D9-L118 L118
V4 with suffix numerals, f/b L4 L4
V4-61-L4 L4
V7 f/b 1 thru 7, f/b A#, L162
f/b L162
V7 f/b 1, 2, 6 or 7, f/b B#, L156
f/b L156 or L301
V7 f/b 1, 6 or 7, f/b C#, L215
f/b L215
Note: #Followed by 1, 2 or 3, f/b 0 thru 4, 7, 8, 9 or A, f/b D8, D9, E7, E8, E9, P01 thru P99 or S6, ww/o numbers and/or letters.
V7 f/b 1 thru 4, 6 or 7, f/b D#, f/b L22 L22
V7 f/b 1, 2, 3, 6 or 7, f/b E#, L216 or L260
f/b L216 or L260
V7 f/b 1 thru 7, f/b F#, f/b L163 L163
V7 f/b 1 thru 7, f/b G#, f/b L231 L231
V7 f/b 1, f/b J#, f/b L292 L292
V7 f/b 1, f/b K#, f/b L303 L303
V7 f/b 1, 6 or 7, f/b L#, f/b L235 L235
V7 f/b 1 thru 7, f/b M#, f/b L117 L117
V7 f/b 1, 6 or 7, f/b N#, f/b L236 L236
V7 f/b 1, 2, 6 or 7, f/b P#, f/b L239 L239
V7 f/b 1, 2, 6 or 7, f/b R, f/b 1, 2 or 3, L248
f/b 0 thru 4, 7, 8 or 9, f/b D8, E7,
E8, E9, P01 thru P99 or S6, ww/o
numbers and/or letters, f/b L239
V7 f/b 1 thru 7, f/b S, f/b 1, 2 or 3, L142
f/b 0 thru 4, 7, 8, 9 or A, f/b D8, E7,
E8, E9, P01 thru P99 or S6, ww/o
numbers and/or letters, f/b L142
V7-3A3 f/b 0 thru 4, 7, 8, 9 or A L313
f/b D8, D9, E7, E8, E9, P01 thru P99
or S6,ww/o numbers
and/or letters, f/b L313
V7 f/b 9, f/b W, f/b 1, 2 or 3, f/b A, L264
f/b D8, E7, E8, E9, P01 thru P99 or
S6, ww/o letters and/or numbers
f/b L264
V7 f/b 1, f/b X, f/b 1, 2 or 3, f/b A, L278
f/b D8, E7, E8, E9, P01 thru P99 or
S6, ww/o letters and/or numbers, f/b L278
V10, f/b 1 thru 5, f/b A, B or L4, L234, L242 or L258
E, f/b 1 thru 4, f/b 1
or 2, f/b D8, ww/o 001 thru
999, ww/o additional
suffix letters and/or
numbers, f/b L4, L234,
L242 or L258
WA, f/b -R or -1R, ww/o L178, L179 or L225
B, D, L, N, P, Q,
T, V or X, OCO/TL, ww/o
numbers ww/o A, B, D,
or P with numbers, ww/o T,
f/b L178, L179 or L225
WA-1RX123-A4-L22 L22
WM-1R11-L102 L102
WZ ww/o D, E, E6, F, G1, G2, L88
H1, H2, T, V or V6,
ww/o -2, -3, or -7, f/b
D, L, M, N, Q, R, S, T
these letters, ww/o
numerals, ww/o hyphenated
letter A, B, D, K, P,
PC or PP, or T without
a hyphen, ww/o numerals
ww/o -S, f/b L88
WZ-Refer to BZ Series —
for details
WZLN ww/o numeral 2, f/b LH, L96
LH5, RH or RH5, f/b L96
1YZ-2R131-A2 f/b L84 L84
YZ(Refer to BZ Series —
for details
1DM thru 4DM, 13DM or 14DM L22, L181, L213,
f/b 1 thru 1000, ww/o letters L226, L229, L230
A thru Z, ww/o numerals, or L263
ww/o letters A thru Z, f/b
numerals, f/b L22, L181, L213
L226, L229, L230 or L263
1HS, 4HS, 8HS, 10HS, 101HS, L22, L244, L267, L277
or 102HS f/b 1 thru or L304
hyphenatedsuffix numbers,
f/b L22, L244, L267, L277, L304
1HT thru 4HT, f/b 1 thru 1000, L305
f/b L305
1LN1 or 2LN1 with suffix L25
numbers and letters "LH"
or "RH", f/b L25
1LS f/b 1 thru 8 or 10 L126
thru 1000, f/b -L, f/b 126
1LS9-L, 1LS56-L f/b L127 L127
1NR, 2NR, 4NR, 11NR, 12NR, L191
31NR, 32NR or 34NR
f/b 1 thru 1000, f/b -1, -2,
-3, -10, -12, -16, -21, -101,
or -126, ww/o up to 5 letters
and/or numerals, f/b L191
1NR, 2NR, 4NR, 11NR, 12NR, L192
31NR, 32NR or 34NR
f/b 1 thru 1000, f/b -4,
thru -8, -41, -50, -51, -53,
-61, -70, -72, -73 or
-74, ww/o up to 5 letters
1NT, 2NT, 4NT, 11NT, 12NT, 14NT, L191
31NT, 32NT or 34NT
f/b 1 thru 1000, f/b -1, -2,
-3, -10, -12, -16, -21, or -31,
ww/o a letter, ww/o up to 5
letters and/or numerals, f/b L191
1NT, 2NT, 4NT, 11NT, 12NT, 14NT, L192
31NT, 32NT or 34NT
f/b 1 thru 1000, f/b -4 thru -8
-41, -50, -51, -53, -61, -70,
-72, -73, or -74, ww/o a letter,
ww/o up to 5 letters and/or
numerals, f/b L192
1PB501-L4 L4
1PL thru 5PL, f/b 1 thru 1000 or L62
6700 thru 6799, w/wo suffix
letters, f/b L62
1SX, 2SX, 4SX, 5SX, 21SX or 91SX, L7
f/b 1 thru 10000, ww/o -H32
thru -H38, -H58, -H65, -H340,
-H391, -H392 or -T, ww/o
numbers and letters, f/b L7
1TB with numerals 1 thru 10 or 12 L25
thru 1000, f/b hyphenated
numerals or D8, ww/o
additional numerals, f/b L25
1TB11-2 with L22 L22
1TL, 2TL, 4TL, 11TL, 12TL, 14TL, L191
101TL, 102TL or 104TL f/b 1
thru 1000, f/b -1, -2, -3,
-10, -12, -16, -21 or -31,
ww/o a letter, ww/o suffix
of up to 5 letters and/or
numerals, f/b L191
1TL, 2TL, 4TL, 11TL, 12TL, 14TL, L192
101TL, 102TL or 104TL f/b 1
thru 1000, f/b -4 thru -8, -41,
-50, -51, -53, -61, -70, -72,
-73 or -74, ww/o a letter,
ww/o suffix of up to 5 letters
1TP, 2TP, 4TP, 101TP, 102TP or L191
104TP f/b 1 thru 1000, f/b -1,
-2, -3, -10, -12, -16, -21,
-101 or -126, ww/o suffix of
up to 5 letters and/or
numerals, f/b L191
1TP, 2TP, 4TP, 101TP, 102TP or L192
104TP f/b 1 thru 1000, f/b -4
thru -8, -41, -50, -51, -53,
-61, -70, -72, -73 or -74,
and/or numerals,
f/b L192
1TW, 2TW, 11TW or 12TW f/b 1 thru L117
1000, f/b hyphenated numerals
1, 2, 3, 5, 7, 8, 10, 12, 50,
56, 70 or 72, ww/o a letter
or numerals, f/b L117
2AC, 3AC, 4AC or 13AC f/b 1 thru L22, L83, L86, L116, L118,
99, ww/o suffix D, f/b L156, L162, L163 or L195
numerals, f/b suffix UL, f/b
L22, L83, L86, L116, L118,
L156, L162, L163 or L195
2LS thru 6LS f/b 1 thru 1000, L126
f/b- L, f/b L126
2MN f/b 1 thru 7 or 9 thru 100, L98
f/b -L, f/b L98
2MN8-L f/b L100 L100
2TB, 3TB or 11TB f/b 1 thru 1000, L25
f/b hyphenated numerals or
D8, ww/o additional numerals,
f/b L25
2VP f/b 1 thru 999#, f/b L22, L83, L22, L83, L86, L112,
L86, L112, L113, L116, L118, L113, L116, L118, L131,
L131, L135, L156, L162 or L163 L135, L156, L162 or L163
2VP48-L183 L183
2VP f/b 7000 thru 7999#, f/b L109 L109
Note: #Followed by 1, 2 or 3, f/b 0 thru 4, 7, 8, 9 or A, f/b D8, E7, E8, E9, P01 thru P99 or S6, ww/o numbers and/or letters.
3A, 3B, 3E, 3F, 3G, 3H, 3K or 3L, L117 or L142
f/b numbers, f/b a letter, ww/o
3SX, 6SX, 7SX, 12SX, 13SX, 14SX, L22
18SX, 23SX, 93SX, 312SX, 313SX
or 412SX, f/b 1 thru 10,000,
ww/o -H32 thru -H38, -H58,
-H65, -H340, -H391M -H392 or
-T, ww/o numbers and letters,
f/b L22
4A, f/b 1 thru 99, f/b a letter, L4, L22, L171 or L285
f/b AA, AD, BA, BD, CA, CD,
DA, DD, EA, EC, ED, FA, FD,
GA, GD, HA, HD, JA, JD, KA,
KD, LA, MA, NA, PA, QA, RA,
TA or VA, f/b 11, 12, 13, 21,
22, 31, 41, 42 or 91, ww/o
letters A thru G, f/b A, B,
G, R, S, W or Y, f/b J, K, L,
N or U, f/b L4, L22, L99,
or L171.
4SE, f/b 1, 2, 3 or 47, ww/o suffix L4
numbers, f/b L4
4SE151, ww/o suffix numbers, f/b L151
L151
4VP8, 4VP11 L162
4VP12, 4VP13 L216
4XE, f/b 1 thru 1000, ww/o L7
additional hyphenated suffix
numbers, f/b L7
6AS-5, -13, -18, -21, -32, -34, L1, L4, L9, L22, L23, L58
-35, -36, -38, -39, -41, -44, L95 or L96
-46, -49, -50, -54, -61, -62,
-63, -68, -79, -85, -89, -101,
-102, -103, -123, -128, -133,
-135, -136, -141, -151, -162,
-177, -178, -194, -195, -198,
-201, -209, -226, -229, -231,
-232, -233, -234, -237 or -238
ww/o two letters, f/b L1, L4,
L9, L22, L23, L58, L95 or L96
6AS-16, -25, -69, -80, -89, -97, L23 or L58
-111, -112, -118, -130, -131,
-132, -143, -153, -157, -161,
-165, -179, -189, -192, -193,
-204, -214, -216, -217, -219,
-223 or -227 ww/o two letters,
f/b L23 or L58
6AS34 or 6AS127 L96
6AS168 or 6AS191 f/b L103 or L103 or L111
L111
6AS-87 or -145 ww/o two letters, L86
f/b L86
6AS-134 ww/o two letters, f/b L20 L20
6AS-138, -169 or -171 ww/o two L82 or L101
letters, f/b L82 or L101
6AS-189, -204 or -214 f/b L23 L23
6BS f/b numbers, f/b hyphenated L115
letter B, L, Q, R or V, f/b
L115
6PL f/b 1 thru 1000 or 6700 thru L62
6799, ww/o suffix letters,
f/b L62
7VP1, 7VP2, 7VP5, 7VP6, 7VP9, L22, L117, L162, L215,
7VP11, 7VP15 thru 7VP20, L216 or L236
7VP22 thru 7VP26, 7VP28
thru 7VP34
8AC29-UL L151
8LS f/b numerals, f/b -L, L128
f/b L128
9SX1-H58 L7
9PL f/b 1 thru 1000, L62, L251
f/b L62, L251
10BS f/b 1 thru 299, f/b L17 L17
11SP1, 11SP2, 11SP3, f/b L129 L129
11SX, 17SX, 19SX, 302SX, 311SX or L4 or L122
333SX, f/b 1 thru 10000, ww/o
-H32 thru -H38, -H58, -H65,
-H340, -H391, -H392 or -T,
ww/o numbers and letters, f/b
L4 or L122
11TS f/b 1, 11, 15, 85, 95 or L191
115, ww/o 1 thru 1000, f/b
-1, -2, -3 or -21, ww/o
letters and numbers, ww/o P,
f/b L191
11TS, 211TS or 511TS f/b 1, 11, L192
15, 85, 95 or 115, ww/o 1
thru 1000, f/b -4 thru -8,
or -61, ww/o letters and
numbers, f/b L192
11TS or 12TS f/b 15, 95 or 115, L311
may be f/b 127 or 70 number may be f/b 1thru 8, L312
10 or 21, f/b L311 or L312
12BS f/b 1 thru 299, f/b L111 L111
12TS, 212TS or 512TS f/b 1, 11, L191
15, 85, 95, 115 or 168, ww/o
1 thru 1000, f/b -1, -2, -3,
-10, -12, -16 or -21, ww/o
letters and numbers, f/b L191
12TS, 212TS or 512TS f/b 1, 11, L192
15, 85, 95 or 115, ww/o 1 thru
1000, f/b -4 thru -8, -27,
-50, -56 or -70 thru -74, ww/o
12TS f/b 15, 95 or 115, may be f/b 127 or 70, L312
may be f/b number 1 thru 8, 10, or 21 f/b L312
13BS, f/b -1 thru -1000, f/b L104 or L23 L104, L23
14PL, f/b 1 thru 1000, f/b L81 L81
16SP2 f/b L22 L22
22AC, 23AC or 24AC f/b 1 thru 99, L22, L83, L86, L116, L118,
ww/o suffix D, f/b numerals, L156, L162, L163 or L195
f/b suffix UL, f/b L22, L83,
L86, L116, L118, L156, L162,
L163 or L195
31SX or 33SX, f/b 1 thru 1000, L254 or L255
ww/o letters, f/b L254 or L255
31TS thru 34TS, f/b 1, 11, 15, 95 L55
or 115, ww/o 1 thru 100, f/b
-1, -2, -3 or -21, f/b L55
31TS thru 34TS, f/b 1, 11, 15, 95 L54
or 115, ww/o 1 thru 100, f/b
-5, -6, -7 or -61, f/b L54
41SM, 42SM, 43SM, 54SM, 141SM, L123, L158, L190 or L212
142SM, 341SM, 342SM, 441SM,
442SM f/b 1 thru 10,000,
ww/o H2, H4, H58, T, T1 or
T2, ww/o additional numerals,
f/b L123, L158, L190 or L212
41TB-5-3-L25 L25
47SE1 ww/o suffix numbers, f/b L4 L4
106DM, 112DM, 128DM or 1115DM, f/b L22, L181, L213, L226,
f/b 1 thru 1000, ww/o letters L229, L230 or L263
A thru Z, ww/o numerals,
w/w o letters A thru Z,
f/b numerals, f/b L22, L181,
L213, L226, L229, L230 or L263
110CF, 111CF, 120CF, 121CF, 210CF, L25
211CF, 220CF or 221CF f/b 1
thru 1000, ww/o -D8, with L25
111PL f/b 1 thru 1000 or 6700 L62
thru 6799, ww/o suffix B,
f/b L62
211TS or 511TS f/b 1, 11, 15, 85, L191
95 or 115, ww/o 1 thru 1000,
f/b -1, -2, -3, -21 or -102,
ww/o letters and numbers,
f/b L191
311TS or 312TS f/b 1, 11, 15, 85, L192
95, 115 or 168, ww/o 1 thru
1000, f/b -27, -53, -71 or
-517, ww/o letters and
numbers, f/b L192
311TS or 312TS f/b 1, 11, 15, 85, L191
95, 115 or 168, ww/o 1 thru
1000, f/b -13 or -102, ww/o
letters and numbers,
f/b L191
402AC f/b 1 thru 99, ww/o suffix L22, L117, L156, L162, L163
D, f/b numerals, f/b suffix L215, L216, L231, L235
UL, f/b L22, L117, L156, or L236
L162, L163, L215, L216,
L231, L235 or L236
2001DM thru 2004DM, 2013DM or L22, L157 and/or L214
2014DM f/b 1 thru 1000, ww/o
letters A thru Z, ww/o
numerals, ww/o letters A thru
Z, f/b numerals, f/b L22,
L157 and/or L214
2106DM, 2112DM, 2115DM or 2128DM L22, L157 and/or L214
f/b 1 thru 1000, ww/o letters
A thru Z, ww/o numerals, ww/o
letters A thru Z, f/b numerals,
f/b L22, L157 and/or L214
1-150 f/b -028, -029, -036, -046, L25
-053, -062, or -067
590-096 L83
Cat. No. Amps V Frequency HP
UX10 f/b C or E 0.1 125 60 —
UX30 f/b C 1 125 60 —
UX40 f/b E 3 125 60 —
UM10 f/b A, B or D 3 250 60 —
UM10C, D, E 0.1 250 60 —
UM35C, D, E 2.0 250 60 —
UM40 f/b B or D 0.1 250 60 —
UM50 f/b E 0.1 30 DC —
2 30 DC —
2 250 60 —
UM10 f/b E 5 250 60 —
UM50 f/b E 0.1 250 60 —
0.1 30 DC —
UM10E, -50E 5 250 60 —
0.1 250 60 —
0.1 30 DC —
UM10A, -10B, -10D, -40B, -40D 3 250 60 —
0.1 250 60 —
0.1 30 DC —
2 30 DC —
2 250 60 —
UM99E 10.1 250 60 —
V9-10, V9-11 10.1 125-250 60 1/2
V9-16 16 125/250 60 —
V9-16 — 125/250 60 1/2
V9-20 Series 20.1 A 125/250 60 1
V9-25 Series 25 A 125/250 60 1
ZX f/b 10 or 40, f/b C or E, 3 125 60 —
f/b 10, 20, 30, 50, 60 or 99, 0.2RES 125 60 —
f/b A, C, E or S, f/b 01, 0.2 60 DC —
may be f/b additional suffix 0.1 48 DC —
ZM f/b 10, 50 or 90, f/b B, 5 125 60 —
D, E or G, f/b 10, 20, 50, 60, 70 3 30 DC —
or 99, f/b A, B, C, D, K, J, F, H, 10.1 250 60 —
E, M, L or S, f/b 01, 03 or 04, 0.1 125 60 —
may be f/b additional suffix 0.1 30/60 DC —
ZV f/b 10 or 50, f/b B, D, E or G, 5 125/250 60 —
f/b 10, 20, 70 or 99, f/b A, 0.1 30 DC —
B, C, D, E, F, H, P or S, Res 125/250 60 —
10.1
f/b 01, 03 or 04, may be 0.1 125/250 60 —
f/b additional suffix Res 0.5 80 DC —
ZW f/b 10 or 50, f/b B or F, 5 125/250 60 —
f/b 15, 20, 70, 90 or 99, 0.1 125/250 60 —
f/b A, B, C, D, F, H or S,
f/b D or W, f/b 1, 3 or 4,
may be f/b additional suffix
HRN91-12SBBN, HRN91-22SBBN, HRN91-16SBBN, HRN91-26SBBN, HRN91-14SBBN, HRN91-24SBBN, HRN91- 15 125 60 —

13SBBN, HRN91-23SBBN, HRN91-18SBBN, HRN91-28SBBN, HRN91-11SBBN, HRN91-21SBBN, HRN91-15SBBN,
HRN91-25SBBN, HRN91-17SBBN, HRN91-27SBBN, HRL91-22BRNB,
HRL91-23DRRB, HRL91-21DRRB, HRL91-27DRRB, HRL91-22GGAB, HRL91-23UGGB, HRL91-21UGGB, HRL91- 10 250 60 —

22UGGB, SRN91-12SBBN,
SRN91-22SBBN, SRN91-16SBBN, SRN91-26SBBN, SRN91-14SBBN, SRN91-24SBBN, SRN91-13SBBN, SRN91- — 125/250 60 1/2

23SBBN, SRN91-18SBBN, SRN91-28SBBN, SRN91-11SBBN, SRN91-21SBBN, SRN91-15SBBN, SRN91-25SBBN,
SRN91-17SBBN, SRN91-27SBBN, SRL91-22BRNB,
SRL91-23DRRB, SRL91-21DRRB, SRL91-27DRRB, SRL91-22GGAB, SRL91-23UGGB, SRL91-21UGGB, SRL91-

22UGGB
MRS Series 10 125/250 60 1/4
MRN Series 16/10 125/250 60 —
MRL Series 12/8 125/250 60 —
— 125-250 60 1/2
311SM2-T, 311SM6-T 4 24 60 —
Code Electrical Rating Code Electrical Rating
L1 15A, 125-250*-480V, ac L13 10A, 125V, ac;
L2 15A, 125-250*-480Vac; 5A, 250*V, ac.
0.5, 125V, dc; L15 15A, 125-250*-480V, ac;
0.25A, 250V, dc. 10A, 125V, ac "L";
L4 5A, 250*Vac 3/4hp, 125V, ac;
1-1/2hp, 250*V, ac;
L7 7A, 250*V, ac 0.5A, 125V, DC;
L8 10A, 125-250*-480V, ac 0.25A, 250V, DC.
L9 10A, 125-250*-480V, ac; L17 20A, 125-250*-480V, ac;
0.5A, 125V, DC; 3/4hp, 125V, ac;
0.25A, 250V, DC. 1-1/2hp, 250*V, ac.
L10 10A, 125-250*Vac;
0.5A, 125V dc;
0.25A, 250V dc.
L19 15A, 125-250*-480V, ac; L25 10A, 125-250*V, ac;
3/4hp, 125V, ac; 1/2hp, 125V, ac.
1-1/2hp, 250V, ac; L29 10A, 250*V, ac.
0.5A, 125V, DC; L33 20A, 125-250*-480V, ac;
0.25A, 250V, DC. 1hp, 125v, ac;
L20 10A, 125V, ac-DC; 2hp, 250*V, ac;
1/8hp, 125V, ac-DC. 0.3A, 125V, DC;
L22 1A, 125V, ac. 0.15A, 250V, DC.
L23 20A, 125-250*-480V, ac; L34 5A, 125-250*-480V,ac.
10A, 125V, ac "L"; L35 5A, 125-250*-480V, ac;
0.5A, 125V, DC; 0.5A, 125V, DC;
0.25A, 250V, DC; 0.25A, 250V, DC.
1hp, 125V, ac;
2hp, 250*V, ac.
L50 17A, 125-250*-480V, ac; L58 25A, 125-250*-480V, ac;
1hp, 125V, ac; 3/4hp, 125V, ac;
2hp, 250*V, ac; 1-1/2hp, 250*V, ac;
10A, 125V, ac "L" 1A, 125V, DC;
0.5A, 125V, DC; 0.5A, 250V, DC.
0.25A, 250V, DC. L59 10A, 125-250*V, ac;
L54 15A, 125-250*V, ac; 0.3A, 125V, DC;
1/3hp, 125V, ac; 0.15A, 250V, DC.
3/4hp, 250*V, ac; L62 15A, 125-250*V, ac;
0.5A, 125V, DC; 3/4hp, 125V, ac;
0.25A, 250V, DC. 1-1/2hp, 250*V, ac.
L55 15A, 125-250*V, ac; L65 15A, 125-250*-480V ac;
1/2hp, 125V, ac; 1/2hp, 125V, ac;
1hp, 250*V, ac; 1hp, 250*V, ac.
0.5A, 125V, DC;
0.25A, 250V, DC.
L67 15A, 125-250*-480V, ac; L81 22A, 125-250*-277Vac;
1/2hp, 250*V, ac; 3/4hp, 125Vac;
1/4hp, 125V, ac; 1-1/2hp, 250Vac.
0.5A, 125V, DC; L82 22A, 125-250*-277V, ac;
0.25A, 250V, DC. 1/2hp, 250*Vac;
L73 15A, 125-250*-480V, ac; 1/4hp, 125Vac.
1/4hp, 125V, ac; L83 15.1A, 1/2hp, 125-250*V, ac;
1/2hp, 250*V, ac; 0.5A, 125V, DC;
1A, 125V, DC; 0.25A, 250V, DC;
0.5A, 250V, DC. 5A, 125V, ac "L".
L74 15A, 125-250*-480V, ac; L84 15A, 125-250*-480V, ac;
2A, 600V, ac; 1/2hp, 125V, ac;
1/8hp, 125V, ac; 1hp, 250*V, ac;
1/4hp, 250*V, ac; 0.5A, 125V, DC;
0.5A, 125V, DC; 0.25A, 250V, DC.
0.25A, 250V, DC.
L85 10A, 125-250*-480V, ac; L93 10A, 125-250*V, ac;
1/8hp, 125V, ac; 1/3hp, 125-250*V, ac.
1/4hp, 250*V, ac. L95 10A, 125-250*-480Vac;
L86 15.1A, 125-250*V, ac; 1/8hp, 125Vac;
1/3hp, 125-250V, ac; 1/4hp, 250Vac,
0.5A, 125V, DC; L96 15A, 125-250*-480V,ac;
0.25A, 250V, DC; 1/8hp, 125V, ac;
5A, 125V, ac "L". 1/4hp, 250*V, ac;
L87 15A, 125-250*-480V, ac; 0.5A, 125V, DC;
1/4hp, 125-250*V, ac; 0.25A, 250V, DC.
0.5A, 125V, DC; L97 20A, 125-250*-480V, ac;
0.25A, 250V, DC. 10A, 125V, ac "L";
L88 15A, 125-250*-480V, ac; 0.5A, 125V, DC;
1/3hp, 125-250*V, ac; 0.25A, 250V, DC;
0.5A, 125V, DC; 1-1/2hp, 125V, ac;
0.25A, 250V, DC. 2hp, 250*V, ac.
L98 10A, 125-250*-480V, ac; L102 22A, 125-250*-480V, ac;
1/2hp, 125V, ac; 1/4hp, 125V, ac;
1hp, 250*V, ac; 1/2hp, 250V, ac.
0.8A, 125V, DC; L103 15A, 125-250*-480V, ac;
0.4A, 250V, DC. 1/8hp, 125V, ac;
L99 10A, 1/4hp, 1/4hp, 250*V, ac.
125-250*V, ac. L104 22A, 125-250*-480V, ac;
L100 10A, 125-250*-480V, ac; 3/4hp, 125V, ac;
1/2hp, 125V, ac; 2hp, 250*V, ac.
1hp, 250*V, ac. L109 5A, 1/10hp, 125-250*V, ac.
L101 22A, 125-250*-480V, ac; L110 3A, 1/6hp, 250*V, ac;
1/4hp, 125V, ac; 3A, 1/10hp, 125V, ac.
1/2hp, 250*V, ac; L111 15A, 125-250*-277V, ac;
0.5A, 125V, DC; 1/8hp, 125V, ac;
0.25A, 250V, DC. 1/4hp, 250*V, ac.
L112 10A, 1/3hp, 125-250*V, ac; L119 3A, 250*V, ac.
0.5A, 125V, DC; L120 10A, 125-250*V, ac;
0.25A, 250V, DC; 1/10hp, 125V, ac;
4A, 125V, ac "L". 1/8hp, 250V, ac;
L113 15.1A, 1/2hp, 125-250*V, ac; 0.3A, 125V, DC;
5A, 125V, ac "L". 0.15A, 250V, DC.
L115 10A, 125-250*V, ac; L121 5A, 250*V, ac;
1/3hp, 125V, ac; 1/6hp, 125V, ac.
3/4hp, 250*V, ac; L122 3A, 250*V, ac.
0.5A, 125V, DC; L123 7A, 125-250*V, ac;
0.25A, 250V, DC. 1/4hp, 125-250*V, ac.
L116 10A, 1/3hp, 125-250*V, ac; L126 10A, 125-250*-480V, ac;
4A, 125V, ac "L". 1/3hp, 125V, ac;
L117 5A, 125V, ac. 3/4hp, 250*V, ac;
L118 10A, 125-250*V, ac; 0.8A, 125V, DC;
1/8hp, 125-250*V, ac. 0.4A, 250V, DC.
L127 10A, 125-250*-480Vac; L131 10A, 1/4hp, 125-250*V, ac;
1/4hp, 125Vac; 0.5A, 125V, DC;
1/2hp, 250*Vac. 0.25A, 250V, DC;
L128 10A, 125-250*-480V, ac; 3A, 125V, ac "L".
1/4hp, 125V, ac; L135 5A, 1/8hp, 125-250*V, ac;
1/2hp, 250*V, ac. 0.5A, 125V, DC;
0.8A, 125Vdc; 0.25A, 250V, DC;
0.4A, 250Vdc. 3A, 125V, ac "L".
L129 12A, 125-250*-480Vac; L142 0.1A, 125V, ac.
1/8hp, 125Vac; L144 15A, 125-250*-480V, ac;
1/4hp, 250*Vac; 1/2hp, 250V, ac;
0.5A, 125Vdc; 1/4hp, 125V, ac;
0.25A, 250Vdc. 0.25A, 250V, DC;
L130 5A, 125-250*-480V, ac; 0.5A, 125V, DC;
1/10hp, 125V, ac; 2A, 600V, ac.
1/6hp, 250V, ac.
L145 20A, 125-250*-480V, ac; L149 1A, 250*V, ac.
10A, 125V, ac "L"; L150 5A, 250*Vac;
0.5A, 125V, DC; 1A, 30Vdc.
0.25A, 250V, DC; L151 5A, 250Vac;
1hp, 125V, ac; 5A, 30V, dc.
2hp, 250*V, ac; L156 11A, 1/3hp,
2A, 600V, ac. 125-250*-277V, ac;
L147 15A, 125-250*-480Vac; 0.5A, 125V, DC;
1/8hp, 125Vac; 0.25A, 250V, DC;
1/4hp, 250*-277Vac. 4A, 125V, ac "L".
L148 15A, 125-250*-480Vac; L157 10A, 1/3hp,
1/8hp, 125Vac; 125-250*-277V, ac.
1/4hp, 250*-277Vac; L158 6A, 125-250*V, ac;
0.5A, 125Vdc; 1/4hp, 125-250*V, ac.
0.25A, 250Vdc. L160 0.5A, 125V, DC.
L161 22A, 125-250*-480V, ac; L169 10A, 125-250*-277V, ac;
1/2hp, 125V, ac; 1/8hp, 125V, ac;
1hp, 250*V, ac. 1/4hp, 250V, ac.
L162 5A, 125-250*-277V, ac; L171 0.1A, 125V, ac;
1/10hp, 250*V, ac. 0.1A, 30V, DC.
L163 3A, 125-250*-277V, ac; L172 0.3A, 125V, DC;
1/10hp, 250*V, ac. 5A, 250*V, ac.
L166 0.3A, 125V, DC. L173 3A, 125V, ac;
L167 22A, 125-250*-277V, ac; 2A, 250*V, ac.
3/4hp, 125V, ac; L174 22A, 125-250*-480V, ac;
1-1/2hp, 250*V, ac. 1/2hp, 125V, ac;
L168 10A, 125V, ac-DC; 1hp, 250*V, ac;
1/4hp, 125V, ac-DC. 0.5A, 125V, DC;
0.25A, 250V, DC.
L176 16A, 1/2hp 125-250*Vac; L180 15A, 125-250*-480V, ac;
5A, 125Vac "L". 2A, 600V, ac;
L178 20A, 125-250*-277V, ac; 1/4hp, 125V, ac;
3/4hp, 125V, ac; 1/2hp, 250*V, ac;
1-1/2hp, 250*V, ac. 1A, 125V, DC;
L179 20A, 125-250-277V, ac; 0.5A, 250V, DC.
15A, 480V, ac; L181 10A, 1/2hp,
5A, 125V, ac "L"' 125-250*-277V, ac.
0.5A, 125V, DC; L182 3A, 1/10hp, 125-250*V, ac.
0.25A, 250V, DC; L183 3A, 125Vac;
1hp, 125V, ac; 10A, 1/3hp, 125Vac.
2hp, 250*V, ac. L184 1A, 125V, ac;
1A, 30V, DC.
L185 4A, 250*V, ac; L192 10A, 125-250*-277V, ac;
1/10hp, 125V, ac. 1/4hp, 125V, ac;
L186 15.1A, 125-250*V, ac. 1/2hp, 250-277V, ac;
L189 11A, 125-250*-480V, ac; 3A, 125V, ac "L".
1/8hp, 125V, ac; L195 13A, 1/2hp, 125-250*V, ac;
1/4hp, 250*V, ac. 0.5A, 125V, DC;
L190 11A, 125-250*V, ac; 0.25A, 250V, DC;
5A, 30V, DC; 5A, 125V, ac "L".
1/4hp, 125-250V, ac. L197 15A, 125-250*-277V, ac;
L191 15A, 125-250*-277V, ac; 1/8hp, 125V, ac;
1/2hp, 125V, ac; 1/4hp, 250*V, ac;
1hp, 250*-277V, ac; 0.5A, 125V, DC;
5A, 125V, ac "L". 0.25A, 250V, DC.
L200 3A, 125-250*-277V, ac; L208 15A, 125-250*-480V, ac;
1/10hp, 250V, ac; 1/2hp, 125V, ac;
3A, 30V, DC. 1hp, 250*V, ac;
L201 10A, 1/4hp, 0.4A, 125V, DC;
125-250*V, ac; 0.2A, 250V, DC.
0.5A, 125V, DC; L210 10A, 125V, ac-DC;
0.25A, 250V, DC; 3A, 250*V, ac-DC;
3A, 125V, ac "L"; 1/4hp, 125V, ac-DC.
3A, 30V, DC. L212 11A, 125-250*V, ac;
L203 0.1A, 125V, ac-DC. 1/4hp, 125-250*V, ac;
L205 15A, 1/3hp, 5A, 30V, DC;
125-250*V, ac. 0.5A, 125V, DC.
L206 7A, 125V, ac.
L213 10A, 1/2hp, L222 0.1A, 30V, DC.
125-250*-277V, ac; L223 6A, 125-250*V, ac;
2A, 480V, ac. 2A, 30V, DC;
L214 10A, 1/3hp, 1A, 125V, ac "L";
125-250*-277V, ac; 1/10hp, 125V, ac.
2A, 480V, ac. L224 20A, 125-250*-480V, ac;
L215 15.1A, 1/2hp, 0.5A, 125V, DC;
125-250*-277V, ac; 0.25A, 250V, DC;
0.5A, 125V, DC; 1hp, 125V, ac;
0.25A, 250V, DC; 2hp, 250*V, ac.
5A, 125V, ac "L". L225 20A, 125-250*-277V, ac;
L216 10A, 1/3hp, 1hp, 125V, ac;
125-250*-277V, ac; 2hp, 250*V, ac.
0.5A, 125V, DC; L226 5A, 125-250*V, ac.
0.25A, 250V, DC; L227 2A, 125V, ac.
4A, 125V, ac "L". L228 13A, 125-250*V, ac.
L229 0.1A, 125V, ac-DC; L236 15.1A, 125V, ac.
15.1A, 12UDC.
1/10hp, 125V, ac. L239 11A, 1/3hp,
15.1A, 12UDC
L230 0.1A, 125V, ac-DC. 125-250*Vac.
L231 3A, 125-250*V, ac; L242 16A, 1/2hp,
1/10hp, 125-250*V, ac. 125-250*-277V, ac.
L232 11A, 125-250*-277V, ac; L243 6A, 125V, ac;
1/3hp, 125-250*-277V, ac; 4A, 250*V, ac;
0.5A, 125V, DC; 2A, 30V, DC;
0.25A, 250V, DC. 1A, 125V, ac "L";
L233 12A, 125-250*-480V, ac; 1/10hp, 125V, ac.
1/4hp, 125V, ac; L244 1A, 125V, ac;
1/2hp, 250V, ac. 1A, 28V, DC.
L234 11A, 250*V, ac. L248 13A, 1/10hp,
L235 N.C:5A, 125V, ac; 125-250*V, ac.
N.O:15.1A, 125V, ac.
L249 5A, 277V, ac L259 15.1A, 250*V, ac
L250 15.1A, 1/2hp, L260 10A, 277V, ac
125-250*V, ac L263 10A, 1/2hp,
L251 0.1A, 30V, dc 125-250*-277V, ac,
L254 5A, 250V, ac, 2A, 24V, dc
0.5A, 125V, dc L264 15.1A, 125-250*-277V, ac
L255 0.5A, 30V, dc L265 10A, 125V, ac;
L256 16A, 125V, ac, 5A, 250*V, ac
10A, 250*V, ac, L267 5A, 28V, dc
1/2hp, 125V, ac L268 22A, 125-250*-480V, ac;
L258 5A, 250*V, ac, 0.5A, 125V, dc;
5A, 125V, ac "L" 0.25A, 250V, dc
L272 20A, 125, 250*, 480 ac; L285 10A, 1/6hp;
10A, 125V, ac "L"; 125-250V, ac
1hp 125V, ac; L291 11A, 1/3hp, 125,
2hp 250*V, ac; 250* or 277V, ac;
1/2A 125V, dc; 1/2A, 125V, dc;
1/4A 250V, dc 1/4A, 250V, dc;
L277 1A, 125V, ac; 6A, 30V, dc;
5A, 28V, dc 4A, 125V, ac "L"
L278 6A, 1/8hp; L292 19A, 125-250-277V, ac;
125-250*-277V, ac 1hp 125V, ac;
L279 1A, 125V, ac; 2hp, 250-277V, ac
0.1A, 30V, dc
L301 10A, 1/2hp; L304 5A, 30 V, dc
125-250V, ac L305 2A, 1/6hp, 250V, ac;
4A, 125V, ac "L" 3A, 1/10hp, 125V, ac
L303 22A, 125-250-277V, ac; L311 10A, 277V, ac, 20A, 125V, ac
1hp 125V, ac; 3/4 hp, 125-250 V, ac
2hp, 250V, ac L312 10A, 277V ac, 20A, 125V ac
1 1/2 hp, 125-350V ac
L313 5A, 125, 250, 277 V ac
1/10 hp, 250V ac
L316 15A, 480 V ac;
22A, 125-277 V ac;
1/4 hp, 125 V ac;
1/2 hp, 250 V ac;
Cat. No. Amps V Frequency HP
ZM1 6A 125/250 60 —
f/b -10,-50,-60;
f/b C; f/b -A thru -Z;
f/b 10, 50, 60, 70, 90 or 99;
f/b any letter A thru Z;
f/b -01, 03 or 04.
may be f/b additional numbers or letters.
ZM1 10.1 A 125/250 60 —
f/b -90, f/b C;
f/b -A thru -Z;
f/b 10, 50, 60, 70, 90 or 99;
f/b any letter A thru Z;
f/b 01, 03 or 04;
may be f/b additional number or letters.
OCO/TL = Or a combination of these letters.
#With or without additional suffix letters and/or numbers.
*250 Volts to GND.
Marking: Company name or tradenames "MICROSWITCH", "MICRO", "HONEYWELL", electrical rating, and UL Recognized Component Mark on switch. Catalog designation on
switch or smallest container.
Cat. No. Temp C POL/THR Per Pole Endurance SPCOA
AML21, f/b B, C, E, F, G, H, J, K, 85+ 1, 2 or M/2 PP 6K 2, See Note 1
L, M, N, P, R or S, f/b B, G
or W, f/b A, B, C or E, f/b
2 or 3, f/b A, B, C or E, f/b
A thru D, ww/o letters and/or
AML21B100, -B101, -C100 thru -C105, 85 1 or 2/2 PP 6K 2
-E100, -E101, -E102, -G100,
-G101 and -G102, f/b L173.
AML21BBA2CD-001 f/b L173 and L203. 85 M/2 — 6K 2
+Switches having suffix "N" or "P" temperatures should not exceed 65 C.
Note 1. The switches are suitable for multiple circuit conditions where opposite polarity exists except switches having suffix "P".
AML22, f/b C, H, J, K, L or M, 85 1, 2 or M/2 PP 6K 2
f/b B, G, or W, f/b B, C, D,
E, F, H, J, K, L, M, R, S, T,
W or X, f/b 2, 3, 8 or 9,
f/b A thru E, f/b A thru D,
f/b L173 or L203.
AML22, f/b -C100 thru -C105, f/b L173 85 1 or 2/2 PP 6K 2
AML23 and AML24, f/b E, F or G, 85 1, 2 or M/2 PP 6K 2
f/b B, G or W, f/b A, B, C or
E, f/b 2 or 3, f/b A thru E,
f/b A or C, f/b 01 thru 08,
f/b L173 or L203.
AML25, AML26 f/b F or G, f/b B, 85 1 or 2/2 PP 6K 2
G or W, f/b B thru G, f/b 2,
3, 8 or 9, f/b A thru E, f/b A,
f/b 01 thru 08, f/b a single or
double combinations of letters
G, R, X or Y, ww/o letters and/or
AML27 f/b A, f/b B, f/b K, f/b 2 65 1 or 2/2 PP 6K —
or 3, f/b AA, AC, BA, BC, EA
or EC, f/b 21 thru 31, f/b two
letters, ww/o letters and/or
AML31 f/b E, F, H, K, L or R, f/b 85 1 or 2/1 — 6K 2
B, G, or W, f/b A, B, C or E,
f/b 4, f/b A, f/b A thru D,
f/b L93
AML32 f/b F or L, f/b B, G or W, 85+ 2/1 PP 6K 2,SeeNote 1
f/b B thru H, K, L, M or P,
f/b 4 or 7, f/b A, f/b A thru
D, ww/o letters and/or numbers
f/b L93
AML32F100-L93 85 2/1 PP 6K 2
+Switches having suffix "N" or "P" temperatures should not exceed 65 C.
AML33 or AML34, f/b E or F,Cf/C B, 85 1 or 2/1 PP 6K 2
G or W, f/b A, B, C or E, f/b
4, f/b A, f/b A or C, f/b 01,
f/b L186 or L205.
AML35 or AML36, f/b F, f/b B, G or 85+ 1 or 2/1 PP 6K 2, See Note 1
W, f/b B, C, F, M or P, f/b 4
or 7, f/b A, f/b A or C, f/b
01, ww/o letters and/or
numbers; f/b L186 or L205.
B-(Refer to BZ Series for details) — — — — —
+. Switches having suffix "N" or "P" temperatures should not exceed 65 C.
BA f/b -3R, ww/o B, D, L, N, P, 82+ 1/1 or 2 — 6K(12Kfor 125 —
Q, T, V or X, ww/o numbers, Vac"L")
ww/o A, B, D or P with numbers,
ww/o T, f/b L23, L178, L224
or L225
BA, OPA, WA or YA ww/o D, F or T, 82+ 1/1 or 2 — 6K —
f/b -R or 1R, ww/o B, D, K,
L, M, N, Q, S, T, V, W or X,
ww/o numbers, ww/o A, B, D or
P with numbers, ww/o T, f/b
L17 or L33
+When these switches are followed by suffix "TP", they should not exceed a temperature of 85 C, and if they are marked with letter "T" in a circle, they should not exceed a
temperature of 150 C.
BA, OPA, WA or YA, ww/o D, F or T, 82+ 1/1 or 2 — 6K See Note 2
f/b -R, -1R, -2R, -3R or -5R,
ww/o B, D, K, L, N, Q, R, T,
V or X, ww/o numbers, ww/o A,
B, D or P, ww/o numbers, ww/o
L160, L224 or L225.
BA, OPA, WA or YA ww/o D, F or T, 82+ 1/1 or 2 — 6K(12K for See Note 2
ww/o numbers, f/b -2R, -3R or 125Vac "L".)
-5R, ww/o B, D, L, N, P, Q,
T, V or X, ww/o numbers, ww/o
A, D or P with numbers, ww/o
L97, L145, L224 or L225.
BA-5R276-A2-L272 82+ 1/2 — 6K See Note 2
temperature of 150 C.
Note 2. Cat No. BA-2RV22-A2 was investigated for a special application requiring 100,000 operations, for a rating of 600 V ac, 1.2 A steady state, 8.9 A in rush. The switch
is not under follow-up for this rating or number of cycles. Cat No. BA-2R273-A2 was investigated for a A600 and R300 rating. Tests were conducted in accordance with the
Standard for Industrial Control Equipment (UL 508). No follow up tests are being conducted for this rating.
BA, WA or YA f/b letters and 82+ 1/1 or 2 — 6K(12Kfor —
numbers, f/b L15 or L19 125Vac "L")
BA, WA or YA ww/o 1 or 2, f/b A, 82+ 1/1 or 2 — 6K —
B, D, L, M, N, P, Q, R, T, V
or X, ww/o numbers, f/b L65
or L208
BA, WA or YA f/b -2R54 or -2, 82+ 1/1 or 2 — 6K(12Kfor —
ww/o A, B, D, L, M, N, P, Q, 125Vac "L")
R, S, T, V or X, ww/o
numbers, f/b L50
BF f/b A, B, L or R, f/b 1 thru 4, @ 1/1 or 2 — 6K AZ
f/b A, B or S, f/b L, P,
R or W,f/b 1 thru 4
temperature of 150 C. Those marked with the letter "H" in a circle, they should not exceed a temperature of 180 C.
@85 Deg. C except: 150 Deg. C. when "A" is in numbering system field 5.
BM, WM and YM, ww/o D, E, E6, F, G, 150+ 1/1 or 2 — 6K(100K)# —
H, T, V or V6, ww/o 1 or 2, f/b
-1R, ww/o D, L, M, N, Q, S, T
D or P with numerals, f/b L102,
L161, L167 or L316
BM-R252-L167 150+ 1/1 or 2 — 6K —
BM, WM and YM, ww/o D, E, E6, F, G, 150+ 1/1 or 2 — 6K —
H, T, V or V6, f/b -2R, ww/o
A, B, D, L, M, N, Q, S, T, V
D or P with numerals, f/b
L101, L161, L167, L174 or L268.
+ Where the neoprene or fiber liner is depended upon for insulation, the max temperature on the materials should not exceed 60 C and 90 C respectively. BM-1RD-D160
should not exceed 90 C.
# Representative of Cat No. BM-1R Series was initially tested at 100,000 cycles. Follow-Up tested at 6000 cycles.
BM, WM, YM, ww/o D, E, EG, F, G 150+ 1/1 or 2 — 6K —
H, T, V or V6, ww/o 1, f/b A, B, D, E
L, M, N, P, Q, R, S, W, X or a
combination of these letters
ww/o numbers, w/wo A, AR, B, D, P, PC,
ww/o numbers, f/b L82 or L167.
+ Where the neoprene or fiber liner is depended upon for insulation, the max temperature on the materials should not exceed 60 C and 90 C respectively. BM-1RD-D160
should not exceed 90 C.
B, BZ, G, R, WZ or YZ, ww/o D, E, 150+ 1/1 or 2 — 6K(100K)# 6(12, 14 with suffix
E6, F, G1, G2, H1, H2, T, V or -PC2).
V6, ww/o -1 or -2, f/b D, E, F,
L, M, N, Q, R, S, T, W or X, or
a combinations of these letters,
T, or TC without a hyphen, ww/o
WP, ww/o numerals, f/b L8, L35,
L96, or L233.
+. Where the neoprene or fiber liner is depended upon for insulation, the max temperature on the materials should not exceed 60 C and 90 C respectively.
#. Initially tested at 100,000 cycles. Follow-Up tested at 6000 cycles.
B, BZ, G, R, WZ or YZ ww/o D, E, 150+ 1/1 or 2 — 6K 6(12, 14 with suffix
E6, F, G1, G2, H1, H2, T, V or -PC2)
V6, ww/o -1, -2, -3 or -7, f/b
D, L, M, N, Q, S, T, W or X, or
T or TC without a hyphen, ww/o
WP, f/b L9 or L233
+Where the neoprene or fiber liner is depended upon for insulation, the max temperature on the materials should not exceed 60 C and 90 C respectively.
B, BZ, G, R, WZ or YZ, ww/o D, E, 150+ 1/1 or 2 — 6K 6(12, 14 with suffix
E6, F, G1, G2, H1, H2, T, V -PC2).
or V6, w/wo -1, -2, -3 or -7,
f/b D, L, M, N, Q, R, S, T or
W, or a combination of these
P, PC or PP, or T without a
hyphen, ww/o numerals; ww/o
-S, f/b L22 or L279.
+. Where the neoprene or fiber liner is depended upon for insulation, the max temperature on the materials should not exceed 60 C and 90 C respectively.
B, BZ, G, R, WZ or YZ ww/o D, E, 150+ 1/1 or 2 — 6K 6(12, 14
E6, F, G1, G2, H1, H2, T, V with suffix
or V6, f/b hyphenated letter -PC2)
D, L, M, N, Q, R, S, T, W or
X, or a combination of these
P, PC, PP or T, or TC without
-S, f/b L67 or L144. (Note:
The letter X may appear
anywhere after the first
hyphen)
B, BZ, G, R, WZ or YZ, ww/o D, E, E6, 150+ 1/1 or — 6K 6 (12,14 with
F, G1, G2, H1, H2, T, V or V6, 2 suff -PC2).
ww/o -1, -2, -3 or -7, f/b D, L, M, N, Q, R,
S, T or W, or a combination of these letters,
ww/o numerals, ww/o hyphenated letter A,
B, D, K, P, PC or PP, or T without a hypen,
L95 or L169.
+Where the neoprene or fiber liner is depended upon for insulation, the max temperature on the materials should not exceed 60 C and 90 C, respectively.
B, BZ, G, R, WZ or YZ ww/o D, E, 150+ 1/1 or — 6K 6(12, 14 with
E6, F, G1, G2, H1, H2, T, V or 2 suff -PC2)
V6, f/b -1, -2, -3, or -7, f/b D, L, M, N, Q, R,
S, T, W or X, or a combination of these
letters, ww/o numerals, ww/o hyphenated letter
A, B, D, K, P, PC, PP or T, or TC without a
hyphen, ww/o numerals, ww/o -S, ww/o
BP, C, D, F, JH, P, R, RNC, RNO
or S, ww/ numerals, f/b L96 or L233
B, BZ, G, R, WZ or YZ ww/o D, 150+ 1/2 or 2 — 6K 6(12,14 with
E, E6, F, G1, G2, H1, H2, T, V suff -PC2)
or V6, f/b -1, -2 or -3, f/b D, L, M, N, Q, R, S, T or
W, or a combination of these letters, ww/o numerals,
ww/o hyphenated letter A, B, D, K, P, PC or PP, or
T without a hyphen, ww/o numerals, ww/o
-S, ww/o BP, C, D, F, JH, P, R, RNC,
RNO or S, ww/o numerals, f/b L103 or L233
BZ ww/o D, E, E6, F, G1, 150+ 1/1 or — 6K 6(12,14 with
G2, H1, H2, T, V or V6, f/b -2F 2 suff -PC2)
or -2G ww/o, D, L, M, N, Q, S, T or W, or
a combination of these letters, ww/o numerals,
ww/o hyphenated letter A, B, D, K, P, PC
or PP, or T without a hyphen, ww/o numerals,
ww/o -S, f/b L9
BZ-R241 or BZ-R2418-A2 150+ 1/1 or 2 — 6K —
f/b L4
BZ-R814-PP1-L189 150+ 1/1 or 2 — 6K —
BZ-RW843515 or BZ-R214 150+ 1/1 or 2 — 6K —
f/b L169
BZ, WZ or YZ ww/o D, E, E6, F, 150+ 1/1 — 6K 6
G1, G2, H1, H2, T, V or V6, or 2 (12,14, with
f/b -Y, -2Y, -3Y or -7Y, suff -PC2)
f/b D, K, L, M, N, Q, S, T,
W or X or a combination of
f/b hyphenated letter A, B,
D, K, P, PC, PP or T or TC
numerals, f/b L4 or L121
ww/o -1, -2, -3 or -7, suff -PC2)
f/b D, L, M, N, Q, S, T,
D, K, P, PC, PP or T,
ww/o -S, f/b L4, L34 or L130
f/b -2, -3 or -7, suff -PC2)
f/b D, L, M, N, Q, R, S, T,
W or X, or a combination of
D, K, P, PC or PP or T,
f/b hyphenated letter suff -PC2);
D, E, L, M, N, Q, R, S, T See
or W, or a combination of Note 3
D, K, P, PC, or T, or TC
L96, L103, L111 or L147
Note 3 - The switch Cat. No. BZ-R1433-A22 rated L111 was tested in a raised ambient of 250 F. The endurance test was conducted for 100,000 C, for a rating of 15 A, 240
V ac, resistive. The tests were conducted in accordance with our Standard for Temperature Indicating and Regulating Equipment (UL 873) Ninth Editions.
BZ, WZ or YZ ww/o D, E, E6, F, 150+ 1/1 or 2 — 6K, 6(12, 14
G1, G2, H1, H2, T, V or V6, (100K)# withsuffix
f/b -2A or -3A, f/b D, L, M, -PC2;
N, Q, S, T or W, or a See Note 4
letter A, B, D, K, P, PC, PP,
or T without a hyphen, ww/o
numerals, ww/o -S, f/b L73 or
L180
#Initially tested at 100,000 cycles, Follow-Up tested at 6000 cycles.
Note 4. Shorting bar construction switches (-2A & -3A) are not intended for connection in the circuits where a condition of opposite polarity may exist between opposite
sides of the contact structure. These switches must be mounted on insulating material or with a suitable insulating barrier supplied between the switch terminals and the
mounting surface when it is metal.
BZ, WZ or YZ ww/o D, E, E6, F, G1, 150+ 1/1 or 2 — 6K 6(12, 14
G2, H1, H2, T, V or V6, f/b with suffix
-2, -3 or -7, f/b D, L, M, N, -PC2)
Q, R, S, T or W, or a
L74, L270 or L271
BZ, WZ or YZ f/b -2, f/b D, L, M, 150+ 1/1 or 2 — 6K 6(12, 14
N, Q, R, S, T or W, or a with suffix
combination of these letters, -PC2)
L87
BZ, WZ or YZ ww/o D, E, E6, F, G1, 150+ 1/1 or 2 — 6K 6(12, 14
G2, H1, H2, T, V or V6, f/b with suffix
-7, f/b D, L, M, N, Q, R, S, -PC2)
T or W, or a combination of
ww/o hyphenated letter A, B, D,
K, P, PC or PP, or T without a
hyphen, ww/o numerals, ww/o
-S, f/b L197 or L233
BZ, WZ or YZ ww/o D, E, E6, T, V 150+ 1/1 or 2 — 6K 6(12, 14
or V6, f/b -1 or -2, f/b D, L, with suffix
M, N, Q, R, S, T, W or X, or a -PC2)
PP, or T without a hyphen, ww/o
DC, DO, or DT, ww/o D, E, E6, F2, 150+ 2/1 or 2 — 6K —
G1, G2, H1, H2, T, V or V6,
f/b -2R or -3R, ww/o D, L, M,
N, Q, S, T or V, ww/o numerals,
ww/o -A, -B, -D or -PC, ww/o
-LH or -RH with numerals,
f/b L59 or L120
G-(Refer to BZ Series for details) — — — — —
MC, MO or MT ww/o suffix D, E, E6, 150+ 1/1 or 2 — 6K —
F, G1, G2, H1, H2, T, V or
V6, f/b -4R, ww/o letter B,
L, Q, N, S or V, ww/o numerals,
ww/o additional letters A, B,
D or P, with numerals, f/b
L20, L168 or L210
MML21 f/b E, B, K or H, f/b A, K, 65 1 or 2/2 PP 6K 2
AA thru AD, f/b A, K, L or W,
LR, LW or LY, ww/o 20, ww/o -000
thru -999, f/b L22
MML21 f/b E, B, K or H, f/b A, K, 65 1 or 2/2 PP 6K 2,
L, M, N, P or W, f/b 2 or 3, f/b See Note 5
BA thru BD, f/b A, K, L or W,
LR, LW or LY ww/o 20, ww/o -000
thru -999, f/b L222
MML21LC f/b 2, 2DG, 2DR, 2DY, 2LB, 65 1 or 2/2 PP 6K 2
2LG, 2LR, 2LW, 2LY, 2RA, DG, DR,
DY, LB, LG, LR, LW, LY or RA,
f/b L222
Note 5-The Cat No. MML21KK2BBKRSDR-001 may be provided with leads and a receptacle. The suitability of the leads and receptacle must be determined in accordance
with the end-use product standard.
MML23 f/b E or K, f/b A, K, L, M, 65 1 or 2/2 PP 6K 2
AC, BA or BC, f/b 01 thur 07,
f/b K or W, ww/o 20, ww/o -000
thru -999, f/b L22 or L222
MML24 f/b E or K, f/b A, K, L, M, 65 1 or 2/2 PP 6K 2
AC, BA or BC, f/b 01 thru 07,
f/b F, G, H, K, M, P, R or W,
ww/o DG, DR, DY, LB, LG, LK, LR,
LW, LY or XX, ww/o DG, DR, DY,
LB, LG, LK, LR, LW, LY or XX,
ww/o 20, ww/o -000 thru -999,
f/b L22 or L222
MML31 f/b E or K, f/b A, K, L, M, 65 1 or 2/2 PP 6K —
N, P or W, f/b 2 or 3, f/b AA (12K for 1A,
thru AD, f/b K, L or W, ww/o 125Vac "L")
LB, LG, LK, LR, LW or LY,
w/wo 20, f/b L223
MML33 f/b E, F, G, H, K, M, N or 65 1 or 2/2 PP 6K(12Kfor all —
P, f/b A, B, C, K, L, M, N, P 125Vac "L")
or W, f/b 2 or 3, f/b AA or AC,
f/b 01, 02, 04, 05 or 07, f/b
K or W, ww/o 20, f/b L223 or
L243
MML34 f/b E, F, G, H, K, M, N or P, 65 1 or 2/2 PP 6K(12Kfor all —
f/b A, B, C, K, L, M, N, P or 125Vac "L")
W, f/b 2 or 3, f/b AA or AC,
f/b 01, 02, 04, 05 or 07, f/b
F, H, K, P, R or W, ww/o NC,
NR, NY or XX, ww/o NC, NR,
NY or XX, ww/o A, B or X,
ww/o 20, f/b L223 or L243
MML82 f/b E or K, f/b E or K, f/b 65 1 or 2/2 PP 6K —
2 or 3, f/b AA thru AD, BA
thru BD, CA thru CD or DA thru
DD, f/b L22 or L222
MML83 f/b E or K, f/b E or K, f/b 65 1 or 2/2 PP 6K(12Kfor 1A, —
2 or 3, f/b AA thru AD, f/b 125Vac "L")
L223
MML88 f/b E, K or L, f/b 2 thru 65 2 to M/M PP 6K(12K for1A, —
10, f/b A thru H or J, f/b 1, 125Vac "L")
2 or 3
OP, Types AL, ALH, AR, ARH, CL, CLH, 55 1/2 — 6K —
P, PH, PM, PMH, Q, QH, R or
RH, ww/o numbers, f/b L1, L2,
L4, L96 or L103
OPD, Types AL, ALM, AR, ARH, CL, CLH, 150+ 2/1 or 2 — 6K —
P, PH, PM, PMH, Q, QH, R and
RH may or may not be f/b
R-(Refer to BZ Series for details) — — — — —
SM Series with Prefix Nos. 1, 5, 130+ 1/1 or 2 — 6K 1
11, 12, 21, 22, 23, 51, 101,
111, 112, 121, 122, 151, 301,
302, 311, 312, 322, 368, 401,
411, 412, 421 or 422 with
Sufix Nos. 1 thru 10,000, ww/o
designation H, S or T, ww/o
numbers, f/b L4, L22, L119,
L149, L150, L151, L166, L171,
L172, L184 or L249
SM7601 ww/o numbers/letters, 130+ 1/2 — 6K 1
f/b L185 with Prefix No. 11
V3- or V3L- f/b 1 thru 99, 201 90@ 1/1 or 2 — 6K(12K See Note 6
thru 299, 401 thru 499, 601 for all
thru 699, 1001 thru 1099, 1301 125Vac "L"),
thru 1399 or 1601 thru 1699#, (100K)+
f/b L22, L29, L83, L86, L112,
L116, L118, L156, L251 or L259
V3- or V3L- f/b 101 thru 199, 301 90@ 1/1 or 2 — 6K(12K See Note 6
thru 399, 500 thru 599, 701 for all
thru 799 or 1701 thru 1799#, 125Vac "L"),
f/b L22, L29, L112, L116, L156, (100K)+
L206 or L291
V3- or V3L- f/b 101E thru 199E or 90@ 1/1 or 2 — 6K(12K for See Note 6
301E thru 399E#, f/b L29 or 125Vac "L")
L112
@All switches marked with letters "H" or "T" in a circle above the rating should not exceed the temperature of 130 C or 150 C respectively.
+Certain switches were initially tested at 100,000 cycles. Follow-Up tested at 6000 cycles.
Note 6-When used with an external tooth lock washer, a 3/64 in. spacing to the normal mounting surface of the switch is not provided and an acceptable barrier is required.
V3-368-D8-L109; V3-368-D9-L109 90@ 1/1 or 2 — 6K See Note 6
V3- or V3L- f/b 601E thru 699E#, 90@ 1/1 or 2 — 6K(12K See Note 6
f/b L29, L112 or L156 for all
125Vac "L")
V3- or V3L- f/b 676-D8-L109 90@ 1/1 or 2 — 6K See Note 6
V3-1055-L206 90@ 1/1 or 2 — 6K See Note 6
V3- or V3L-, f/b 1101 thru 1199, 90@ 1/1 or 2 — 6K(12Kfor all See Note 6
1201 thru 1299, 1401 thru 1499, 125Vac "L".)
1501 thru 1599 or 1801 thru
1899#, f/b L22, L29, L93, L112,
L116, L131 or L156.
V3- or V3L-, f/b 1101E thru 1199E, 90@ 1/1 or 2 — 6K(12K for 125V See Note 6
1201E thru 1299E, or 1501E thru ac "L".),(100K)+
1599E#, f/b L29, L112, or L131.
V3- or V3L-, f/b 1901 thru 1999#, 90@ 1/1 or 2 — 6K(12K for all See Note 6
f/b L86, L113 or L259. 125Vac "L".)
V3-1909-D8-L228. 90@ 1/1 or 2 — 6K See Note 6
@ - All switches marked with letters "H" or "T" in a circle above the rating should not exceed the temperature of 130 C or 150 C respectively.
+ - Certain switches were initially tested at 100,000 cycles. Follow-Up tested at 6000 cycles.
Note 6 - When used with an external tooth lock washer, a 3/64 in. spacing to the normal mounting surface of the switch is not provided and an acceptable barrier is
required.
V3-1911, f/b -D8A2, -D8A7, -D89 or 90@ 1/1 or 2 — 6K See Note 6
-D884, f/b L186; V3-1914-D882
-L186 or V3L-1949-L186.
V3-, f/b 1981 or 1983, f/b -D8, f/b 130 1/1 or 2 — 6K(12K for 125Vac See Note 6
L86, L113 or L259. "L".)
V3L-2100-L201 90@ 1/1 or 2 — 6K(12K for 125Vac "L"), See Note 6
(100K, for 3A, 30Vdc.)
V3- or V3L-, f/b 2101 thru 2199 or 90@ 1/1 or 2 — 6K(12K for 125Vac"L"), See Note 6
2201 thru 2299#, (100K)+
2301 thru 2399#
f/b L22, L29,
L99, L131 or L201.
V3-2100-D963-L216 90@ 1/1 or 2 — 6K(12K for125Vac"L".) See Note 6
@ - All switches marked with letters "H" or "T" in a circle above the rating should not exceed the temperature of 130 C or 150 C respectively.
+ - Certain switches were initially tested at 100,000 cycles. Follow-Up tested at 6000 cycles.
Note 6 - When used with an external tooth lock washer, a 3/64 in. spacing to the normal mounting surface of the switch is not provided and an acceptable barrier is
required.
V3-or V3L- f/b 2401 thru 2599#, 90@ 1/1 — 6K See Note 6
f/b L22, L109, or 2 (12K for
L162, L163 or L200 125Vac "L")
V3L-2453-D8-L200 90@ 1/1 or 2 — 100K See Note 6
@All switches marked with letters "H" or "T" in a circle above the rating should not exceed the temperature of 180 C or 150 C, respectively.
V3-or V3L- f/b 2401E thru 90@ 1/1 — 6K See Note 6
2499E#, f/b L109 or L182. or 2
V3- or V3L- f/b 3001 thru 90@; 1/1 — 6K(12K See Note 6
3099, 3101 thru 3199, (130 C for or 2 for 125V,
3201 thru 3299 or 3301 Cat. No. ac "L"),
thru 3399#, f/b L22, L29, V3-3001-D8) (100K)+$
L83, L86, L112, L116, L118,
L163, L215, L250 or L259
@All switches marked with letters "H" or "T" in a circle above the rating should not exceed the temperature of 180 C or 150 C, respectively.
$Cat. Nos. V3L-f/b 3235, 3236 or 3238, f/b -D8 are follow-up tested at 100,000 cycles with ratings of 3A, 125/250 Vac.
Note 6 — When used with an external tooth lock washer, a 3/64 in. spacing to the normal mounting surface of the switch is not provided and an acceptable barrier is
required.
V3- or V3L- f/b 3001E thru 3099E#, 90@ 1/1 or 2 — 6K(12K See Note 6
f/b L83 or L176 for 125
Vac "L")
V3- or V3L- f/b 4001 thru 4099#, 90@ 1/1 or 2 — 6K(12K See Note 6
f/b L22 or L135 for 125
Vac "L")
(100K)+
Note: 6-When used with an external tooth lock washer, a 3/64 in. spacing to the normal mounting surface of the switch is not provided and an acceptable barrier is
required.
V3- or V3L- f/b 4501 thru 4599#, 90@ 1/1 — 6K(100K)+ See Note 6
f/b L226 or 2
V3- or V3L- f/b 41001 thru 41999#, 90@ 1/1 — 6K See Note 6
f/b L232 or 2
V3- or V3L- f/b 70001 thru 74999#, 90@ 1/1 — 6K(100K)+ See Note 6
f/b L109 or L251 or 2
V3L-73317-D8-L22 90@ 1/1 — 6K(100K)+ See Note 6
or 2
required.
V3L-70009-D9-L118 90@ 1/1 or 2 — 6K See Note 6
V4 with suffix numerals, f/b L4 55 1/1 or 2 — 6K —
V4-61-L4L4 55 1/2 — 6K —
required.
V7 f/b 1 thru 7, f/b @ 1/1 or 2 — 6K SeeNote 7
A#, f/b L162 (30K)+
V7-3A3 f/b 0 thru 4, @ 1/1 — 100K++ SeeNote 7
7, 8, 9 or A, f/b D8, D9 , 7,
E8, E9, P01 thru P99
or S6, w w/o numbers
and/or letters, f/b L313
V7 f/b 1, 2, 6 or 7, f/b B#, @ 1/1 or 2 — 6K SeeNote 7
f/b L156 or L301 (12K for 4A,
125 Vac "L")
(100K)++
V7 f/b 1, 6 or 7, f/b C#, @ 1/1 or 2 — 6K SeeNote7
f/b L215 (12K for 5A,
125 Vac "L")
(100K)++
+Initially tested at 30,000 cycles. Follow-Up tested at 6000 cycles.
++Initially tested at 100,000 cycles. Follow-Up tested at 6000 cycles.
@-85 Deg. C except: 150 Deg. C when "A" is in numbering system digit 5.
Note 7-The case, actuator and plunger seals have not been evaluated for their sealing ability and should not be considered reliable for protection against contamination.
V7 f/b 1 thru 4, 6 or 7 f/b D#, f/b L22 @ 1/1 or 2 — 6K See Note 7
V7 f/b 1, 2, 3, 6 or 7 f/b E#, @ 1/1 or 2 — 6K(12Kfor See Note 7
f/b L216 or L260 for 4A, 125 Vac "L")
V7 f/b 1 thru 7, f/b F#, f/b L163 @ 1/1 or 2 — 6K See Note 7
V7 f/b 1 thru 7, f/b G#, f/b L231 @ 1/1 or 2 — 6K See Note 7
V7 f/b 1, f/b J#, @ 1/1 or 2 — 6K See Note 7
f/b L292
@-85 Deg. C except: 150 Deg. C when "A" is in numbering system digit 5.
V7 f/b 1, f/b K#, f/b L303 85 1/1 or 2 — 6K SeeNote 7
(100K)++
V7 f/b 1, 6 or 7, f/b L#, f/b L235 @ 1/1 or 2 — 6K See Note 7
V7 f/b 1 thru 7, f/b M#, f/b L117 @ 1/1 or 2 — 6K See Note 7
V7 f/b 1, 6 or 7, f/b N#, f/b L236 @ 1/1 or 2 — 6K See Note 7
V7 f/b 1, 2, 6 or 7, f/b P#, f/b L239 @ 1/1 or 2 — 6K See Note 7
V7 f/b 1, 2, 6 or 7, f/b R, @ 1/1 or 2 — 6K SeeNote 7
f/b 1, 2 or 3, f/b 0 thru 4,
7, 8 or 9, f/b D8, E7, E9,
P01 thru P99 or S6, ww/o
numbers and/or letters,
f/b L239
@85 Deg. C except: 150 Deg. C when "A" is in numbering system digit 5.
V7 f/b 1 thru 7, f/b S, f/b 1, @ 1/1 or 2 — 6K SeeNote 7
2 or 3, f/b 0 thru 4, 7, 8,
9 or A, f/b D8, E7, E9, P01 thru
P99 or S6, ww/o numbers and/or
letters, f/b L142
V7 f/b 9, f/b W, f/b 1, 2 or 3, @@ 1/1 or 2 — 6K See Note 7
f/b A, f/b D8, E7, E8, E9, (100K)++
letters and/or numbers,
f/b L264
V7 f/b 1, f/b X, f/b 1, 2 or 3, @@ 1/1 or 2 — 6K See Note 7
f/b A, f/b D8, E7, E8, E9, (100K)++
letters and/or numbers,
f/b L278
@85 Deg. C except: 150 Deg. C. when "A" is in numbering system field 5.
@@200 Deg. C when "X" or "W" in field 3 and "A" in field 5.
V10, f/b 1 thru 5, f/b A, B or 85 1/1 — 6K See
E, f/b 1 thru 4, f/b 1 (100K)+ Notes
or 2, f/b D8, ww/o 001 thru 7&8
suffix letters and/or
numbers, f/b L4, L234,
L242 or L258
WA, f/b -R or -1R, ww/o 82++ 1/1 — 6K —
B, D, L, N, P, Q, or 2 (12K for
T, V or X, OCO/TL, ww/o 125 Vac "L")
numbers ww/o A, B, D,
or P with numbers, ww/o T,
f/b L178, L179 or L225
+Cat. No. V10, f/b 1 thru 4, f/b E, with code L242 was initially tested at 100,000 cycles. Follow-Up tested at 6000 cycles.
++When these switches are followed by suffix "TP", they should not exceed a temperature of 85 C, and if they are marked with letter "T" in a circle, they should not exceed
a temperature of 150 C.
Note 8-These switches are provided with a metal actuator with or without an actuator cover. The metal actuator is an uninsulated live part (one piece construction of
terminal, contact and actuator arm). When the cover is not provided, consideration should be given to the means of actuation and control with an uninsulated live part which
would normally be assumed to be a dead metal (grounded) part.
WA-1Rx123-A4-L22 82 1/1 or 2 — 6K —
WM-1R11-L102 150+ 1/1 or 2 — 30K —
WZ ww/o D, E, E6, F, G1, G2, 150+ 1/1 or 2 — 6K 6
H1, H2, T, V or V6, (12, 14,
ww/o -2, -3, or -7, f/b with suff
D, L, M, N, Q, R, S, T -PC2)
these letters, ww/o
numerals, ww/o hyphenated
letter A, B, D, K, P,
PC or PP, or T without
a hyphen, ww/o numerals
ww/o -S, f/b L88
WZ-Refer to BZ Series — — — — —
for details
WZLN ww/o numeral 2, f/b LH, 55 1/1 — 6K —
LH5, RH or RH5, f/b L96
1YZ-2R131-A2 f/b L84 150+ 1/1 — 6K —
YZ(Refer to BZ Series — — — — —
for details
1DM thru 4DM, 13DM or 14DM 85 1 or 2/ PP 6K —
f/b 1 thru 1000, ww/o letters 1 or 2 (100K)+
A thru Z, ww/o numerals,
ww/o letters A thru Z, f/b
numerals, f/b L22, L181, L213
L226, L229, L230 or L263
+Representative samples of DM Type of switches rated L226, L229 and L230 were tested initially at 100,000 cycles. Follow-Up tested at 6000 cycles. For specific catalog
numbers, see the test records of the Report.
1HS, 4HS, 8HS, 10HS, 101HS, 150 1/1 or 2 — 6K —
or 102HS f/b 1 thru 1000,
ww/o additional hyphenated
suffix numbers, f/b L22,
L244, L267, L277 or L304
1HT thru 4HT f/b 1 thru 1000, 55 1/1 or 2 — 6K —
f/b L305
1LN1 or 2LN1 with suffix 150 1/2 — 6K —
numbers and letters "LH"
or "RH", f/b L25
1LS f/b 1 thru 8 or 10 55+ 2/1 — 6K —
thru 1000, f/b -L, f/b 126
1LS9-L, 1LS56-L f/b L127 55+ 2/1 — 6K —
1NR, 2NR, 4NR, 11NR, 12NR, 55 1, 2 or PP 6K(12K —
31NR, 32NR or 34NR M/1 or 2 for 5A,
f/b 1 thru 1000, f/b -1, -2, 125Vac "L")
-3, -10, -12, -16, -21, -101,
or -126, ww/o up to 5 letters
1NR, 2NR, 4NR, 11NR, 12NR, 55 1, 2 or PP 6K(12K —
31NR, 32NR or 34NR M/1 or 2 for 3A,
f/b 1 thru 1000, f/b -4, 125Vac "L")
thru -8, -41, -50, -51, -53,
-61, -70, -72, -73 or
-74, ww/o up to 5 letters
1NT, 2NT, 4NT, 11NT, 12NT, 14NT, 55 1, 2 or PP 6K(12K —
31NT, 32NT or 34NT M/1 or 2 for 5A,
f/b 1 thru 1000, f/b -1, -2, 125Vac "L"
-3, -10, -12, -16, -21 or -31,
ww/o a letter, ww/o up to 5
letters and/or numerals, f/b L191
1NT, 2NT, 4NT, 11NT, 12NT, 14NT, L192 1, 2 or PP 6K(12K —
31NT, 32NT or 34NT M/1 or 2 (for 3A,
f/b 1 thru 1000, f/b -4 thru -8, 125Vac "L"
-41, -50,-51, -53, -61, -70,
-72, -73 or -74, ww/o a letter,
ww/o up to 5 letters and/or
numerals, f/b L192
1PB501-L4 130+ 1/2 — 6K 1
1PL thru 5PL, f/b 1 thru 1000 or 150 1/1 or 2 — 6K(30Kor —
6700 thru 6799, w/wo suffix 100K)+
letters, f/b L62
1SX, 2SX, 4SX, 5SX, 21SX or 91SX, 130 1/2 — 6K SeeNote 9
f/b 1 thru 10000, ww/o -H32
thru -H38, -H58, -H65, -H340,
-H391, -H392 or -T, ww/o
numbers and letters, f/b L7
1TB with numerals 1 thru 10 or 12 150 1/1 or 2 — 6K —
thru 1000, f/b hyphenated
numerals or D8, ww/o
additional numerals, f/b L25
+. Cat. Nos. PL1 thru PL1000 and PL6700 thru PL6799 were initially tested at 100,000 Cycles and 30,000 Cycles respectively. Follow-Up tested at 6000 Cycles.
Note 9. Terminals designated by Suffix "H58" have been investigated for use with receptacles AMP, No. 61160-1, and the use with other terminals should be investigated in
the end-use product.
1TB11-2 with L22 150 1/1 or 2 — 6K —
1TL, 2TL, 4TL, 11TL, 75 1, 2 or PP 6K(12K See Note 7
12TL, 14TL, 101TL, 102TL M/1 or 2 for 5A,
or 104TL f/b 1 thru 1000, 125Vac"L")
f/b -1, -2,-3, -10, -12, -16,
-21 or -31, ww/o a letter,
ww/o suffix of up to 5
letters and/or numerals,
f/b L191
1TL, 2TL, 4TL, 11TL, 75 1, 2 or PP 6K(12K See Note 7
12TL, 14TL, 101TL, 102TL M/1 or 2 for 3A,
or 104TL f/b 1 thru 1000, 125Vac"L")
f/b -4 thru -8, -41, -50,
-51, -53, -61, -70, -72,
-73, or -74, ww/o a letter,
ww/o suffix of up to 5
letters and/or numerals,
f/b L192
1TP, 2TP, 4TP, 101TP, 102TP or 75 1, 2 or PP 6K(12K See Note 7
104TP f/b 1 thru 1000, f/b -1, M/1 or 2 for 5A,
-2, -3, -10, -12, -16, -21, 125Vac "L")
-101 or -126, ww/o suffix
of up to 5 letters and/or
numerals, f/b L191
1TP, 2TP, 4TP, 101TP, 102TP or 75 1, 2 or PP 6K(12K See Note 7
104TP f/b 1 thru 1000, f/b -4 M/1 or 2 for 3A,
thru -8, -41, -50, -51, -53, 125Vac "L")
-61, -70, -72, -73 or -74,
1TW, 2TW, 11TW or 12TW f/b 1 thru 55 1 or 2/2 — 6K —
1000, f/b hyphenated numerals
1, 2, 3, 5, 7, 8, 10, 12, 50,
56, 70 or 72, ww/o a letter
or numerals, f/b L117
2AC, 3AC, 4AC or 13AC f/b 1 thru 90 1 or PP 6K(100K)+, See Note 11
99, ww/o suffix D, f/b 2/1 or 2 (12K for
numerals, f/b suffix UL, f/b 4A & 5A,
L22, L83, L86, L116, L118, 125Vac "L")
L156, L162, L163 or L195
2LS thru 6LS f/b 1 thru 1000, 55++ 2/1 — 6K —
f/b -L, f/b L126
2MN f/b 1 thru 7 or 9 thru 100, 55 2/1 — 6K —
f/b -L, f/b L98
2MN8-L f/b L100 5 2/1 — 6K —
+Cat. No. 13AC9 was initially tested at 100,000 cycles. Follow-Up tested at 6000 cycles.
++Where the neoprene or fiber liner is depended upon for insulation, the maximum temperature on the materials should not exceed 60 C and 90 C respectively.
Note 11-These switches may employ a varnished impregnated fiberglass shield which has been subjected to Dielectric Strength Tests. For further details see Report.
2TB, 3TB or 11TB f/b 1 thru 1000, 150 1/1 or 2 — 6K —
f/b hyphenated numerals or
D8, ww/o additional numerals,
f/b L25
2VP f/b 1 thru 999#, 90@ 2/1 or 2 PP 6K See Note 6
f/b L22, L83, L86, L112, (12K
L113, L116, L118, L131, (for 125
L135, L156, L162 or L163 (Vac "L")
2VP48-L183 90@ 2/1 or 2 PP 6K See Note 6
2VP f/b 7000 thru 7999#, f/b L109 90@ 2/1 or 2 PP 6K See Note 6
@All switches marked with letter "H" or "T" in a circle above the rating should not exceed the temperature of 130 C or 150 C respectively.
3A, 3B, 3E, 3F, 3G, 3H, 3K or 3L, 55 1 or 2/1 or 2 PP 6K 2, See Note 12
f/b numbers, f/b a letter, ww/o
3SX, 6SX, 7SX, 12SX, 13SX, 14SX, 130 1/2 — 6K SeeNote 9
18SX, 23SX, 93SX, 312SX, 313SX
or 412SX, f/b 1 thru 10,000,
ww/o -H32 thru -H38, -H58,
-H65, -H340, -H391M -H392 or
-T, ww/o numbers and letters,
f/b L22
Note 12. The switches may be "matrix" mounted. A glass filled polycarbonate is used for the connector. See Report (Test Record No. 1) for results of a temperature test
conducted. The use of the " matrix" mounting should be considered in the final application.
Note 9. Terminals designated by Suffix "H58" have been investigated for use with receptacles AMP, No. 61160-1, and the use with other terminals should be investigated in
4A, f/b 1 thru 99, f/b a letter, 85 1 or 2/1 or 2 PP 6K 2
f/b AA, AD, BA, BD, CA, CD,
DA, DD, EA, EC, ED, FA, FD,
GA, GD, HA, HD, JA, JD, KA,
KD, LA, MA, NA, PA, QA, RA,
TA or VA, f/b 11, 12, 13, 21,
22, 31, 41, 42 or 91, ww/o
letters A thru G, f/b A, B,
G, R, S, W or Y, f/b J, K, L,
N or U, f/b L4, L22, L99,
or L171.
4SE, f/b 1, 2, 3 or 47, ww/o suffix 105 1/1 or 2 — 6K —
numbers, f/b L4
4SE151, ww/o suffix numbers, f/b 105 1/2 — 6K —
L151
4VP8 85 2/2 PP 6K See Notes 7 & 11
4VP11 85 1/2 — 6K See Notes 7 & 11
4VP12 85 2/2 PP 6K See Notes 7 & 11
4VP13 85 1/2 — 6K See Notes 7 & 11
4XE, f/b 1 thru 1000, ww/o 130 1/2 — 6K —
additional hyphenated suffix
numbers, f/b L7
Note 7. The case, actuator and plunger seals have not been evaluated for their sealing ability and should not be considered reliable for protection against contamination.
Note 11. These switches may employ a varnished impregnated fiberglass shield which has been subjected to Dielectric Strength Tests. For further details see Report.
6AS-5, -13, -18, -21, -32, -34, 150+ 2/1 or 2 PP 6K —
-35, -36, -38, -39, -41, -44,
-46, -49, -50, -54, -61, -62,
-63, -68, -79, -85, -89, -101,
-102, -103, -123, -128, -133,
-135, -136, -141, -151, -162,
-177, -178, -194, -195, -198,
-201, -209, -226, -229, -231,
-232, -233, -234, -237 or -238
ww/o two letters, f/b L1, L4,
L9, L22, L23, L58, L95 or L96
6AS-16, -25, -69, -80, -89, -97, 82 2/1 or 2 PP 6K —
-111, -112, -118, -130, -131, (12K for
-132, -143, -153, -157, -161, 125Vac "L")
-165, -179, -189, -192, -193,
-204, -214, -216, -217, -219,
-223 or -227 ww/o two letters,
f/b L23 or L58
+Where the neoprene or fiber liner is depended upon for insulation, the maximum temperature on the materials should not exceed 60 C and 90 C respectively.
6AS34 or 6AS127 150+ 2/2 PP 6K —
6AS168 or 6AS191 f/b L103 or 150+ 2/2 PP 6K —
L111
6AS-87 or -145 ww/o two letters, 90++ 2/1 or 2 PP 6K See Note 6
f/b L86
6AS-134 ww/o two letters, f/b L20 150+ 2/1 or 2 PP 6K —
6AS-138, -169 or -171 ww/o two 150+ 2/1 or 2 PP 6K —
letters, f/b L82 or L101
6AS-189, -204 or -214 f/b L23 82 2/1 or 2 PP 6K —
++Switches marked with letter "T" in a circle above the rating should not exceed 150 C.
6BS f/b numbers, f/b hyphenated 150 1/1; — 6K —
letter B, L, Q, R or V, f/b 2CKT
L115
6PL f/b 1 thru 1000 or 6700 thru 150 1/1 or 2 — 6K —
6799, ww/o suffix letters, (30K or
f/b L62 100K)
7VP1, 7VP2, 7VP5, 7VP6, 7VP9, 85 2 or 3/M PP 6K(12K SeeNotes 7
7VP11, 7VP15 thru 7VP20, for all & 11
7VP22 thru 7VP26, 7VP28 125Vac "L"
thru 7VP34 ratings)
8AC29-UL 65 2/2 PP 6K 11
+Cat. Nos. PL1 thru PL1000, PL6700 thru PL6799 were initially tested at 100,000 Cycles and 30,000 Cycles respectively. Follow-Up tested at 6000 Cycles.
8LS f/b numerals, f/b -L, 55+ 2/1 — 6K —
f/b L128
9BS f/b 1 thru 1000, f/b L93 55 1/1 or 2 — 6K —
9SX1-H58 75 1/2 — 6K See Note 9
Note 9-Terminals designated by Suffix "H58" have been investigated for use with receptacles AMP, No. 61160-1, and the use with other terminals should be investigated in
9PL f/b 1 thru 1000, 150 1/1 — 6K(30K or —
f/b L62, L251 100K)+
10BS f/b 1 thru 299, f/b L17 55 1/1 or 2 — 6K See Note 13
11SP1, 11SP2, 11SP3 f/b L129 150++ M/2 PP 6K —
11SX, 17SX, 19SX, 302SX, 130 1/2 — 6K See Note 9
311SX or 333SX
f/b 1 thru 10000, ww/o
-H32 thru -H38, -H58, -H65,
-H340, -H391, -H392 or -T,
ww/o numbers and letters,
f/b L4 or L122
+. Cat. Nos. PL1 thru PL1000, PL6700 thru PL6799 were initially tested at 100,000 Cycles and 30,000 Cycles respectively. Follow-Up tested at 6000 Cycles.
++. Where the neoprene or fiber liner is depended upon for insulation, the maximum temperature on the materials should not exceed 60 C and 90 C respectively.
Note 13. These switches are equipped with an adjusting wheel which varies the contact air gap from a minimum of 0.006 in. to a maximum or 0.070 in. The adjusting wheel
is of melamine material.
Note 9. Terminals designated by Suffix "H58" have been investigated for use with receptacles AMP, No. 61160-1 and the use with other terminals should be investigated in
11TS f/b 1, 11, 15, 85, 85 1/2 — 6K(12K for 5A, See Note 14
95 or 115, ww/o 1 thru 1000, 125Vac"L".)
f/b -1, -2, -3 or -21,
ww/o P, f/b L191
11TS, 211TS or 511TS 85 1/2 — 6K(12K for3A, See Note 14
f/b 1, 11, 15, 85, 95 125Vac"L".)
or 115, ww/o 1 thru 1000,
f/b -4 thru -8 or -61,
f/b L192
11TS f/b 15, 95 or 115, f/b number 1 thru 8, f/b L311 65 1/1,2 - 6K -
12BS f/b 1 thru 299, 55 1/1 or 2 — 6K See Note 13
f/b L111
Note 13. These switches are equipped with an adjusting wheel which varies the contact air gap from a minimum or 0.006 in. to a maximum of 0.070 in. The adjusting wheel
is of melamine material.
Note 14. These switches may employ an external nylon or PVC sleeve over the actuating lever which have not been investigated for temperatures above 55C. These
switches may also employ rubber seals which have not been investigated for resistance to contamination or temperatures above 55C.
12TS, 212TS or 512TS f/b 1, 11, 85 2/2 PP 6K(12K SeeNote 14
15, 85, 95, 115 or 168, ww/o for 5A,
1 thru 1000, f/b -1, -2, -3, 125Vac "L")
-10, -12, -16 or -21, ww/o
12TS, 212TS or 512TS f/b 1, 11, 85 2/2 PP 6K(12K See Note 14
15, 85, 95 or 115, ww/o 1 thru for 3A
1000, f/b -4 thru -8, -27, 125Vac "L")
-50, -56 or -70 thru -74, ww/o
12TS f/b 15, 95 or 115, f/b number 1 thru 8, f/b L312 65 1/1,2 - 6K -
Note 14-These switches may employ an external nylon or PVC sleeve over the actuating lever which have not been investigated for temperatures above 55C. These switches
may also employ rubber seals which have not been investigated for resistance to contamination or temperatures above 55C.
13BS, f/b -1 thru -1000, f/b L104 55 1/1 — 6K —
or L23 or 2
14PL, f/b 1 thru 1000, f/b L81 150 1/1 or 2 — 6K —
H-58, f/b L227
16SP2 f/b L22 150 M/2 PP 6K —
22AC, 23AC or 24AC f/b 1 thru 99, 65 1 or PP 6K(12K See Note 11
ww/o suffix D, f/b numerals, 2/1 or 2 for 4A & 5A,
f/b suffix UL, f/b L22, L83, 125Vac "L")
L86, L116, L118, L156, L162,
L163 or L195
31SX or 33SX, f/b 1 thru 1000, 55 1/2 — 6K —
ww/o letters, f/b L254 or L255
31TS thru 34TS, f/b 1, 11, 15, 95 55 1 to M/1 or 2 PP 6K —
or 115, ww/o 1 thru 100, f/b
-1, -2, -3 or -21, f/b L55
31TS thru 34TS, f/b 1, 11, 15, 95 55 1 to M/1 or 2 PP 6K —
or 115, ww/o 1 thru 100, f/b
-5, -6, -7 or -61, f/b L54
41SM, 42SM, 43SM, 54SM, 130 1/1 or 2 — 6K(30K)+ 1, See Note 9
141SM, 142SM, 341SM, 342SM, 441SM,
442SM, f/b 1 thru 10,000,
ww/o H2, H4, H58, T, T1 or
T2, ww/o additional numerals,
f/b L123, L158, L190 or L212
41TB-5-3-L25 150 2/2 — 6K —
47SE1 ww/o suffix numbers, f/b L4 105 1/1 or 2 — 6K —
+Cat. No. 41SM1-T-L212 was initially tested for 30,000 cycles. Follow-Up tested for 6000 cycles.
Note 9-Terminals designated by Suffix "H58" have been investigated for use with receptacles AMP, No. 61160-1, and the use with other terminals should be investigated in
106DM, 112DM, 128DM or 1115DM, 85 1 or PP 6K(100K)+ 2
f/b 1 thru 1000, ww/o letters 2/1 or 2
letters A thru Z, f/b
numerals, f/b L22, L181, L213,
L226, L229, L230 or L263
110CF, 111CF, 120CF, 121CF, 150 1/1 or 2 — 6K —
210CF, 211CF, 220CF or 221CF
f/b 1 thru 1000, ww/o -D8,
with L25
+Representative Samples of DM Type of switches rated L226, L229, and L230 were tested initially at 100,000 cycles. Follow-Up tested at 6000 cycles. For specific catalog
numbers, see the records of the Report.
111PL f/b 1 thru 1000 or 6700 150 1/1 or 2 — 6K(30K —
thru 6799, ww/o suffix B, or 100K)+
f/b L62
211TS or 511TS f/b 1, 11, 15, 85, 85 1/2 — 6K(12K for5A, See Note 14
95 or 115, ww/o 1 thru 1000, for 5A,
f/b -1, -2, -3, -21 or -102, 125Vac "L")
f/b L191
+Cat. Nos. PL1 thru PL1000 and PL6700 thru PL6799 were initially tested at 100,000 Cycles and 30,000 Cycles respectively. Follow-Up tested at 6000 Cycles.
311TS or 312TS f/b 1, 11, 15, 85, 85 1 or 2/2 PP 6K(12K See Note 14
95, 115 or 168, ww/o 1 thru for 3A,
1000, f/b -27, -53, -71 or 125Vac "L")
-517, ww/o letters and
numbers, f/b L192
311TS or 312TS f/b 1, 11, 15, 85, 85 1 or 2/2 PP 6K(12K See Note 14
95, 115 or 168, ww/o 1 thru for 5A,
1000, f/b -13 or -102, ww/o 125Vac "L")
letters and numbers,
f/b L191
402AC f/b 1 thru 99, ww/o suffix 65 1 or PP 6K(12K See Note 11
D, f/b numerals, f/b suffix 2/1 or 2 for 5A
UL, f/b L22, L117, L156, & 4A,
L162, L163, L215, L216, L231, 125Vac "L")
L235 or L236
2001DM thru 2004DM, 2013DM or 85 1 or PP 6K(100K)+ —
2014DM f/b 1 thru 1000, ww/o 2/1 or 2
letters A thru Z, ww/o
numerals, ww/o letters A thru
Z, f/b numerals, f/b L22,
L157 and/or L214
2106DM, 2112DM, 2115DM or 2128DM 85 1 or PP 6K(100K)+ 2
f/b 1 thru 1000, ww/o letters 2/1 or 2
letters A thru Z, f/b numerals,
f/b L22, L157 and/or L214
1-150 f/b -028, -029, -036, -046, 150 1/1 or 2 — 6K —
-053, -062, or -067
590-096 90@ 1/1 or 2 — 6K See Note 6
(12K for
125Vac,"L")
UX10 f/b C or E 85 1/2 — 6K —
UX30 f/b C — 6K —
UX40 f/b E — 100K —
UM10 f/b A, B or D 85 1/2 — 6K —
Note 3: These switches have been investigated for use only in an ordinary environment. Switches should be evaluated for compliance with the end use product standard if
intended to be used in environment such as oil, freon, X-Ray, etc.
UM10C, D, E 65 1P/1 or 2T — 100K —
UM35C, D, E 65 1P/1 or 2T — 6K —
UM40 f/b B or D 6K, 100K —
UM50 f/b E 100K —
UM10 f/b E 85 1/2 — 6K See Note 3
UM50 f/b E — 100K See Note 3
UM10E, -50E 85 1/2 — 6K See Note 3
— 100K See Note 3
— 100K See Note 3
UM10A, -10B, -10D, -40B, -40D 85 1/2 — 6K —
6K, 100K —
100K —
100K —
100K —
UM99E 85 1/2 — 6K See Note 3
V9-10, V9-11 100 1/1 — 6K —
V9-16 125 1/1 — 6K —
V9-16 125 1/1 — 6K —
V9-20 Series 100 1/2 — 6K —
V9-25 Series 100 1/2 — 6K —
ZV f/b 10 or 50, f/b B, D, 120 1/2 — 6K —
E or G, f/b 10, 20, 70 or 99, 120 1/2 — 6K See Note 9
f/b A, B, C, D, E, F, H, P or S, 120 1/2 — 10K —
f/b 01, 03 or 04,
ZW f/b 10 or 50, f/b B or F, 120 1/1 — 6K —
f/b 15, 20, 70, 90 or 99,
f/b A, B, C, D, F, H or S,
f/b D or W, f/b 1, 3 or 4,
ZM1 125 1/2 — 10K —
f/b -10,-50,-60;
f/b C; f/b -A thru -Z;
f/b 10,50,60,70 or 90;
f/b -01,03 or 04.
f/b -Numbers or -Letters
ZM1 125 1/2 — 10K —
f/b -90
f/b -A thru -Z;
f/b 10,50,60,70 or 90;
f/b 01,03 or 04;
f/b -Numbers or -Letters.
311SM2-T, 311SM6-T 130 1/1 — 55K See Note 15
Note 9: Switch was tested w/wire size 16 AWG connected to Quick Connect Tab size #110.
Note 15: Cat. Nos. 311SM2-T and 311SM6-T were additionally tested with Overload Test parameters of 22 A, 26.4 V ac, 50 Cycles with a Power Factor of 65-75%.
Endurance Test parameters were 4 A, 24 V ac, 55,000 Cycles with a Power Factor of 98-100%. Refer to Test Record 32 of Report dated 2/25/1952 for further details.
Last Updated on 2006-03-03
Questions? Notice of Disclaimer Page Top
Copyright © 2006 Underwriters Laboratories Inc.®
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service.
Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or
Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from
the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material
must include a copyright notice in the following format: "Copyright © 2006 Underwriters Laboratories Inc.®"
UIRV.E19310 - Heat-automatic Fire Detectors for Use in Hazardous Locations Page 1 of 2
UIRV.E19310
Heat-automatic Fire Detectors for Use in Hazardous Locations
Page Bottom
Heat-automatic Fire Detectors for Use in Hazardous Locations
See General Information for Heat-automatic Fire Detectors for Use in Hazardous Locations
KIDDE-FENWAL INC E19310

400 MAIN ST
ASHLAND, MA 01721 USA
Class I, Groups A, B, C and D; Class II, Groups E, F and G.

Spacing Ft
Temp Smooth to Wall or

Type Detector Type No. Range F Ceiling Partition
Rate compensation 27121-000 * 50 25
Rate compensation 27121-000 ** 25 12.5
Rate compensation 28021-011, -012, ** 25 12.5
-013
*-140-144, 175-194, 250-269, 325-344, 400-424.
**-145-164, 195-234, 270-309, 345-384, 425-474.
Electrical ratings: 5 amp, 125 v, ac; 0.5 amp, 125 v, dc; 2.0 amp, 24 v, dc; 1.0 amp, 48 v, dc.
This Listing applies to heat detectors only and not to wiring or other appliances of systems of which they form a part.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's
Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for
the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information,
Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings).
2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the
extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2008 Underwriters
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=UIRV.E19310&ccn... 4/1/2008
UIRV.E19310 - Heat-automatic Fire Detectors for Use in Hazardous Locations Page 2 of 2
Laboratories Inc.®"
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=UIRV.E19310&ccn... 4/1/2008
QVAJ7.E199827 - Process Control Equipment for Use in Class I, Zone 0, 1 and 2 Hazardous Locations C... Page 1 of 2
-.+/0 112 0
! / :
6 : A1*: 7 > $3 & B 1
3 $ 4 3$!+ ! 5%6 7 3 85 3''"&)

5 58 5 "
#&"&% / 4 / 6 6 52C
!
! "#$#%&'( "#$#%&') "#$$#%##) "#$#%##" * +
" , &#& -"%.

/
# $ $ % * / 0 1 &- & &- & 2 2 &- - &- - &- " &- 3( &- 3( 2 2 &- 4 & &-
4 & &5 &- 4 & 2 2 &- 4 - &- 4 - &- 4 " &- 4 " 2 2 &- 4 3( &- , 2 &- , 2. &- , 2. &- 6 &- 6. 5 &.
5 &. 54 3. 54 3.7. 54. 2 &7 & &-/8. &- 79 5 &- 6 &- / &- 6. &- , 2.
&-.
&#$ 4 3, 54 &. 7./ 54 &.7.
/ 54 &. 54 &. & / 42 42 7 &-/8 .
7 &-/8 7/ ##& 3&" ##& &%(:
0 0 5
" & $ ' # $ $ 52 /8 2 /8& 2 /8#: 0 0 1 5 ; 2 /83
" 4 2 52. 4 (($.

/ 4 2 52. 4 (($. 4 2 52. 4 "%$.
/ 4 2
52. 4 "%$.
$ $ # ( * / 0 1 4 2 / / 0 1 &- 0 1 " 4" 3( 43( #& 43(

4#&
) * 0 &- . &3 3&$7 .&3 &#$7 ; * 0 &- .&3 3&$7 .

&3 &#$7 ; *
4 0 &- . &- .& &- .-" . 3$$; * 4 0 &- . &- .& &- .-" .3$$; * 4 0
3&47 .
&- . & 3&$7 .-" .3$$; * 4 0 3&$7 . &- . & 3&$7 .-" .3$$; * 0 3& . &3 &3
&- .&3 &3 &-7 .&3 &3 -" .&3 &3 ($ . &3 &3 3&$7 .&3 &3 &#$7 .
&3 &3 : 0 0 57
0 3 % 7 3$ %$ 7 : 0 0 , 0 : 0 0 2
* ) * , 9 & 9< = & 9< = &9 &9 &9
* &-/8 0 1 / 5 ; * / . 7/ 56 2 7/ 3$/5 3$/5 .4 4 3$/5

. 4 6"%$ , - 9. 9 , % 9 , "9 , % 9> &-/8 . 5 ; * , 0
1 - 9.#9 " 9 ) 9. 9 ) 9. 9 ( 9.
& 9 ( 9.
&9 3( 9 3% 9. 9 3- 9.& 9; 3$.
3$$/5 . 4 63#$$ 4 <
&#& 4 < -"%
3$$ 3$$
* , 2 0 1 % 9 " 9 - 9. 9 ? @ ) 9. 9 ? @ ( 9.
& 9? @ - 9. 9 ? @ ) 9. 9 ? @
( 9.& 9? @
* , 2 0 1 "6 )6 . 9 (6 .
& 9 (6 .
& 9 (6 .
& 9 &$ : 0 0 ,3$ ,33
+ , 2 7 2 7
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=QVAJ7.E199827... 1/29/2008
QVAJ7.E199827 - Process Control Equipment for Use in Class I, Zone 0, 1 and 2 Hazardous Locations C... Page 2 of 2
+
* ) 7/ " 9 > * & &9
$ $ # ( * / 0 2 / 0 &- 0 3( 0 43( : 0 0 &9 .

2
# $ $ % * / 0 5 & 5 : 0 0 5
* ) * 2./ &-/8 2
7* &$$" $3 $"
K1 L 2 : ! *
* ! D &$$"7 0 E
** :* F : * 1 0 1 * 1 + 0 : 1 1 1 7F
7* + 4 * 1 0 ! 7 G 1 0 0 + 1 7F 7* + 5 G
G * 1
7 * : * 1 : 4 10H ! I3 61 :
! . ! ? @:1 0 * : !: 1 : *1 ? !@
& : J * : 4 * : :7 0 J :1 ** H
: * : :1 1 * ! ! : IJ * ! D &$$"7
0 EJ
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=QVAJ7.E199827... 1/29/2008
QQPX2.E211190 - Power Supplies for Use in Hazardous Locations - Component Page 1 of 1
QQPX2.E211190
Power Supplies for Use in Hazardous Locations - Component
Page Bottom
Power Supplies for Use in Hazardous Locations - Component
See General Information for Power Supplies for Use in Hazardous Locations - Component
POWER ONE INC E211190

740 CALLE PLANO
CAMARILLO, CA 93012 USA
Class I, Division 2, Groups A, B, C, and D.
Power supply, MG Series, Model MG3-1G-1G-PM-S1074.
Marking: Company name or "E211190" and model designation.

http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=QQPX2.E211190... 12/6/2007
PTDR.E6951 - Motors for Use in Hazardous Locations Page 1 of 1
PTDR.E6951
Motors for Use in Hazardous Locations
Page Bottom
Motors for Use in Hazardous Locations
See General Information for Motors for Use in Hazardous Locations
BALDOR ELECTRIC CO E6951

5711 R S BOREHAM JR ST
FT SMITH, AR 72901 USA
Class I, Group C and D; Class II, Groups E, F and G.
Class I, Group D; Class II, Groups E, F, and Gmotors with Listed brakes. The brakes in these explosion-proof and dust ignition proof assemblies are
intended essentially for holding purposes and may be used for stopping light inertia loads.
Class I, Group D; Class II, Groups F and Gmotors for use with pulse width modulated variable frequency inverter drives over the frequency range
of 6 to 90 HZ .
Class I, Group Dmotors for use with voltage source, current source and pulse width modulated variable frequency inverter drives over the frequency
range of 0 to 120 HZ .
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under
UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always
look for the Mark on the product.
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=PTDR.E6951&... 11/15/2007
NWHP2.E224022 - Information Technology Equipment for Use in Hazardous Locations - Comp... Page 1 of 1
)* +"( "",-""
0 %
! = 8 8 , " BC # 7 -5 ' #
. /* $ 0$ )1 $ ) %.$ 2 B D)
) ! (1 !,
8E 7+BB E8 . )D7!
! " # $ % & ! " # ' #& (
# !! " #"
$ ! %&
' &( & ) *+ !! ,* ! %&
! " # $ % (
' # ' &( & - .- $/ ( 0

" $ 1' ! &0 2 2 3 " # "
" # # 2 " "# &
$ 4' # " * 5 ' # $ &

7# )) ) )
F G ( 1 0 ,#
'# "6 )) 7 8 &

9
," ## # : # " " # "2

7 :/ 7#! 2 &; " # " 7 $ " 2 7 :/ 7#
! 2 & $ " $ " # &
7 # " # " " ; ' 1 < " 4 &," =

8 1 > ? @ # " " #
" ? @& &," A* # " ; ' 1 "# 7
8 &
A ## < " 3 &8 " # # " "
4A' # " 6 )) 7 8 &
9A
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NWHP2.E... 3/6/2006
NWGQ8.E136709 - Information Technology Equipment Including Electrical Business Eq... Page 1 of 2
*+ ,-./ 012345
,9 @
@A
( 4& ,<47&
A,@
'47&<
47&
A,@
'4- 6=4 92 BC'
DA 4@<
46C '
49 6@
&'6, C '
4 BC'
DA 4@ &
@'7
' 7& ,4, ,
AD 4 4@
6 $+ ) %) *7 ) * 6) 8 E)
1 -
<
; % < E 0
" ! " #$%

$ $ $ $ $ $ $ $ $ $ &
' ( ( )
*********
# *****+++ ,
# - .
# )**** / 0**** / )**** / )**** / 0**** / )**** / 0****

/ 1**** / 1 22" 3 , ***** )**** )**** ***** ,4
***** )***** )***** ****** ,4 ****** **** ,562
/ 7/ 8 9 :/ 1,56 / 7/ 8 9 5
$ % % %
# ,5 / 6/ 8 6 6
;** ;** ) ;**
# ! " " % % %
% % % %
& ! '()( )0) <
, := & 6,45 & >226,45 * & %>3 6,45 &5,4?
, := & * 6,45 3 &5,4?>++6,45 &5,4?
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=N... 3/6/2006
NWGQ8.E136709 - Information Technology Equipment Including Electrical Business Eq... Page 2 of 2
5 := & : 6,45 & E>,6,45 & >56,45 * % &5,4?>66,45 " &5,4?> 6,45 &5,4?>
76,45
@ 3>96,45 @3
6 ,6,45 ; &/%>56,45 -/ - &5,4?>66,45 3
F F 6,45 E" ">F,F 6,45 & - & 1 & >F5F 6,45 & >F6F 6,45 * & % & &5,4?>F2F 6,45
" &5,4?>F F 6,45 &5,4?>F F 6,45 5,4?>F7
F 6,45 3>F9F 6,45 3
= & * & & D& 4@ ,42,D=,4CA &

'66=,&
,6@&
. : 52 ,D=,6=,&
,6@&
! : 52 & 7 : 52 % &3 7 : 52 7 : 52 &3 7 : 52/ &3
,&
?'49G AD,424,A &@
&, 4,A F E) F F D& 6= &
. 6=C=F A '
94,@
'4,4 / 6 94'
H AD 4 4@ ,&
?7&
,4, ,
;, @ D ,@ 4 0
NC @
'4 O 1@
'6 7 '6,'
A & ,9 - D
D2&
'9=@I 4 &
:&'
@& ;,5 &
,@&
' <
46J
-= ,DD ,&,46 7,6 AD,42K 4,A &D& C6@'

4@=' ,@
,5, 4 @'4'
@ 7, C& @=,@D& C6@ ' 4@
'7' =,L 5 4
A,4C7,6@
C& C4 & ;K : D & L'
6 42@= D& C6@ 5 ,&
'49@ = ; ,&? = C 5 6 4 ' & @ 5 ;'@ ,4 6 L &
C4 & ;K : D & L'
6 :,2 ?7&@= ,& ? 4@
= D& C6@
;D &A'@@ = & D& C6@'4 7@= A,@& ', 6 4@

,'4 '4@= 4' 4 &@
'7'
6,@'4 ' & 6@&
2 C5M6@@ @ = 7 :' 496 4 '@'4 G -=
(C' < 47&A,@'4 '94 ,4 $ &;'@
'49 7 ' AC @5 D& 4@ ' 4@=' & 4@'
&@ 2,4 ' 4,4 4 A' , ' 49A,44 & :'@= C@,42
A,4'DC,@'4 7@= ,@ , & & ,:'49 -= @ ,@A 4@F/ D&
'4@ 7&A @ = 4' 4 &@'
7'
6,@
'4 ' & 6@&
2:'@=D &A' '47 &A
4 & :&'
@& ;,5 &,@&' <46F AC @,DD ,&, M,6 4@@ @
= @&,6@ A,@& '
, < 4, ' @'4 @= & D&
'4@ A,@& ', AC @'46C ,
6 D2&
'9=@4 @
'6 '
4@ = 7 :' 497& A,@GF D2& '
9=@I 4 & :&'
@& ;,5 & ,@& ' <46JF
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=N... 3/6/2006
NWFN8.E182378 - Auxiliary Devices for Use in Class I, Zone 0, 1 and 2 Hazardous Locations Certified for Canada - Component Page 1 of
NWFN8.E182378
Auxiliary Devices for Use in Class I, Zone 0, 1 and 2 Hazardous Locations Certified for Canada - Component
Page Bottom
Auxiliary Devices for Use in Class I, Zone 0, 1 and 2 Hazardous Locations Certified for Canada - Component
See General Information for Auxiliary Devices for Use in Class I, Zone 0, 1 and 2 Hazardous Locations Certified for Canada - Component
R STAHL SCHALTGERATE GMBH E182378

AM BAHNHOF 30
74638 WALDENBURG-WUERTT, GERMANY
Class I, Zone 1, Ex me II.
Voltage limiters, for use with Listed or Recognized pilot lights, Type 80 100 01 74 0.
Class I, Zone 1, Ex de IIC.
Pusbutton , Type 8003/1 followed by additional suffixes.
Class I, Zone 1, Ex dme IIC
Pilot Light Type , Type 8013/3 followed by additional suffixes.
Class I, Zone 1, Ex dm IIC.
Panel-Mounted illuminated pushbutton , Type 8018/3 followed by additional suffixes.
Marking: Company name, type designation and Recognized Component Mark for Canada .
Copyright © 2006 Underwriters Laboratories Inc.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products
bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be
presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with
permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format:
"Copyright © 2006 Underwriters Laboratories Inc.®"
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NWFN8.E182378&ccnshorttitle=Auxiliary+Dev... 10/19/2006
NWFN2.E182378 - Auxiliary Devices for Use in Class I, Zone 0, 1 and 2 Hazardous Locations - Component Page 1 of
NWFN2.E182378
Auxiliary Devices for Use in Class I, Zone 0, 1 and 2 Hazardous Locations - Component
Page Bottom
Auxiliary Devices for Use in Class I, Zone 0, 1 and 2 Hazardous Locations - Component
See General Information for Auxiliary Devices for Use in Class I, Zone 0, 1 and 2 Hazardous Locations - Component
R STAHL SCHALTGERATE GMBH E182378

AM BAHNHOF 30
74638 WALDENBURG-WUERTT, GERMANY
Class I, Zone 1, AEx me II.
Voltage limiter, for use with Listed or Recognized pilot lights, Type 80 100 01 74 0.
Class I, Zone 1, AEx de IIC.
Pusbutton, Type 8003/1 followed by additional suffixes.
Class I, Zone 1, AEx dme IIC
Pilot Light Type , Type 8013/3 followed by additional suffixes.
Class I, Zone 1, AEx dm IIC.
Panel-Mounted illuminated pushbutton , Type 8018/3 followed by additional suffixes.
Marking: Company name and type designation.

Copyright © 2006 Underwriters Laboratories Inc.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products
bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be
presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with
permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format:
"Copyright © 2006 Underwriters Laboratories Inc.®"
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NWFN2.E182378&ccnshorttitle=Auxiliary+Dev... 10/19/2006
NRAG.E198348 - Programmable Controllers for Use in Hazardous Locations Page 1 of 1
NRAG.E198348
Programmable Controllers for Use in Hazardous Locations
Page Bottom
Programmable Controllers for Use in Hazardous Locations
See General Information for Programmable Controllers for Use in Hazardous Locations
ROCKWELL AUTOMATION/ ALLEN-BRADLEY E198348

1201 S 2ND ST
MILWAUKEE, WI 53204 USA
Class I, Division 2, Groups A, B, C and D.
Combined generator control module, Model 1407-CGCM.
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRAG.E198348&... 2/18/2008
NRAG7.E183151 - Programmable Controllers for Use in Hazardous Locations Certified for Canada Page 1 of 2
NRAG7.E183151
Programmable Controllers for Use in Hazardous Locations Certified for Canada
Page Bottom
Programmable Controllers for Use in Hazardous Locations Certified for Canada
See General Information for Programmable Controllers for Use in Hazardous Locations Certified for Canada
PROSOFT TECHNOLOGY INC E183151

4TH FL
1675 CHESTER AVE
BAKERSFIELD, CA 93301 USA
Class I, Division 2, Groups A, B, C and D.
DeviceNet scanner module , PTQ-DNET.
I/O communication modules, Models 1560-MBP, 1560-PDP, 3170-INTB, -INTB-4 , 3170-MBS, 3300-MBP, 3350-MBP, 3700-DEM, 3750-DEM.
Models 4101, 4102, 4104, 4105, 4106, 4107, 4127, 4201, 4202, 4204, 4205, 4206, 4207, 4210, 4301, 4302, 4303, 4304, 4305, 4306, 4307, 4310,
4502, 4506, 4507, 4601, 4602, 4604, 4605, 4606 or 4607 may be followed by additional characters.
Models 5101, 5102, 5104, 5105, 5106, 5107, 5127, 5201, 5202, 5204, 5205, 5206, 5207, 5210, 5301, 5302, 5303, 5304, 5305, 5306, 5307, 5310,
5502, 5506, 5507, 5601, 5602, 5604, 5605, 5606 or 5607.
Models 6101-WA, 6102-WA, 6104-WA, 6105-WA, 6106-WA, 6107-WA, 6127-WA, 6201-WA, 6202-WA, 6204-WA, 6205-WA, 6206-WA, 6207-WA, 6210-
WA, 6301-WA, 6302-WA, 6303-WA, 6304-WA, 6305-WA, 6306-WA, 6307-WA, 6310-WA, 6502-WA, 6506-WA, 6507-WA, 6601-WA, 6602-WA, 6604-WA,
6605-WA, 6606-WA and 6607-WA.
Model PTQ may be followed by XXXX; Models PTQ-AFC, PTQ-PDPMV1, PTQ-HART.
Models MVI69 may be followed by XXXX, MVI69-AFC, MVI69-HART, MVI69-MBP, MVI-PDPS.
Logic units, Models 3100-CAS, 3100-CBM, 3100-DFM, 3100-EMC, 3100-FOX, 3100-GDF, 3100-GSI, 3100-HAR, 3100-IMP, 3100-LNG, 3100-LTQ, 3100-
MCM, 3100-MDA16, 3100-MDA4, 3100-MDA-USA, 3100-MTS, 3100-N2, 3100-PCX, 3100-ROC, 3100-SEA, 3100-SYS, 3100-YRK.
Programmable controllers, I/O Model 3170-PDP.
Programmable controllers, 7000-xxx, 7100-xxx, 7005-xxx, 7105-xxx, 7008-xxx, 7108-xxx, 7009-xxx, 7109-xxx, 7010-xxx, 7110-xxx, 7015-xxx,
7115-xxx, 7108-xxx, 7118-xxx, 7109-xxx, 7119-xxx.
Serial communication modules, Models MVI46-XXX, MVI56-XXX, MVI56-MBP, MVI71-XXX, MVI94-XXX, where XXX may be additional suffixes.
Models MVI56-XXXNET, MVI56-AFC, MVI56-DEM, MVI56-MBP, MVI56-PDPS, where XXX may be additional suffixes.
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRAG7.E183151... 2/25/2008
NRAG7.E183151 - Programmable Controllers for Use in Hazardous Locations Certified for Canada Page 2 of 2
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NRAG7.E183151... 2/25/2008
NITW8.E183955 - Industrial Control Panels Certified for Canada - Component Page 1 of 1
NITW8.E183955
Industrial Control Panels Certified for Canada - Component
Page Bottom
Industrial Control Panels Certified for Canada - Component
See General Information for Industrial Control Panels Certified for Canada - Component
MENCOM CORP E183955

3745 TIMBERWALK DR
GAINESVILLE, GA 30506 USA
Interface connectors for use in industrial control panels.Series BN, CX, DA, DB, DDB, DH, DM, DN, DP, DP1, EP, GF, RJ followed by additional
letters and/or numbers.
Marking: Company name, series designation and the Recognized Component Mark for Canada .
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NITW8.E183955... 12/6/2007
File 032169-007, Class 6225-01 Page 1 of 1
Certification Record
CUSTOMER CLASS FILE
Rockwell Automation, Inc./ Allen-

6225-01 071101
Bradley
1201 South Second St FUSEHOLDER ASSEMBLIES-
Milwaukee
WI
53204
USA Refer to Class Description for program details
THE FOLLOWING FUSEHOLDER ASSEMBLIES HAVE BEEN EXAMINED IN ACCORDANCE

WITH CSA STD. C22.2 NO 39-M1987 EXCEPT CL 4.1.1:
l Fuseholder assemblies, segmented fuse blocks type for use with standard code cartridge fuses,
stack type blocks or 1-, 2- or 3-pole, 250V max, Cat Nos 1491-N122, 1491-R162, 600V, 1491-
N161, 30A.
l Cat Nos 1492-FB1C30, -FB2C30; FB3C30, -FB1C30-L, -FB2C30-L, -FB3C30-L, 30A max,
600V ac max, DIN rail mounting - NOT FOR DISCONNECT means - NOT FOR BRANCH
CIRCUIT protection/wiring.
l Fuseholder, segmented type blocks, for use with 1-1/2 in by 13/32 in dia cartridge fuses, single or
multi-pole, Class M. Part Nos 1491-R165, -R167, -R169, -R171, 30A max, 600V max.
l Cat Nos 1492-FB1M30; -L; -D1; -D2; 1492-FB2M30; -L; 1492-FB3M30; -L, 30A max, 600V ac
max, 90V dc max for miscellaneous and Class CC fuses respectively, DIN rail mounting - NOT
FOR DISCONNECT means.
l Fuseholder, extractor type; Cat Nos 1492-FB1J30; -L; -FB2J30; -L; -FB3J30; -L; 30A, 600V ac,
1492-FB1J60; -L; -FB2J60; -L; -FB3J60; -L, 60A, 600V ac.
Notes:
1. All fuseholders have pressure type (box) wire connector type terminals only, except for the 30A
fuseholders which may have terminals either of the wire binding screw type sems type, or the box
type (pressure connector).
2. All fuseholders are certified only as component parts of larger certified assemblies where the
suitability of the combination has been determined by the Canadian Standards Association.
/sp
Copyright © 2003 CSA International. All rights reserved.
http://directories.csa-international.org/xml_transform.asp?xml=certxml\6162-6225-01.xm... 12/11/2003
Page 1 of 1
CUSTOMER CLASS FILE
Solar Turbines Incorporated A

4215-01 026165-0-000
Caterpillar Company
ELECTRIC GENERATING
9280 Skypark Court
PLANTS-
San Diego, CA, 92123-5398
July 12, 1999 (Replaces: July 9, 1998 )
Class I Division 2 Group D; Class I Zone 2 IIA; T3 Gas, Liquid, or Dual Fuel Turbine Driven Generator
Sets Models:
l "SATURN" 1.2 MW max, 6.6 KV max, 3 phase, 50 or 60 Hz; Control Circuit 24 V dc, 15 A max.
l "CENTAUR" 4.6 MW max, 13.8 KV max, 3 phase 50 or 60 Hz; Control Circuit 24 V dc, 15 A
max.
l "TAURUS 60" 5.2 MW max, 13.8 KV max, 3 phase, 50 or 60 Hz; Control Circuits 24 V dc, 15 A
max.
max.
l "MARS" 10.7 MW max, 13.8 KV max, 3 phase, 50 or 60 Hz; Control Circuit 24 V dc, 15 A max.
Gas or Dual Fuel Turbine Driven Generator Sets:
l "TITAN 130", 12.8MW max, 3 phase, 13.8 KVmax, 50 or 60 Hz, Control Circuits 24 Vdc,
15Amax.
Notes:
1. This Certification covers electrical features only.

2. The above model designations may include suffixes to designate driven equipment.
3. The skids may be equipped with auxiliary components such as Starter Motors, Lube Oil Pumps,
Lube Oil Heaters etcetera, each requiring a separate electrical supply and each bearing the
necessary data nameplate.
dt
http://directories.csa-international.org/xml_transform.asp?xml=certxml\4454-4215-01.xml&xsl=xsl/certrec.xsl
... 11/1/2002
Page 1 of 1
CUSTOMER CLASS FILE

9098-01 026165-0-000
Caterpillar Company
MISCELLANEOUS-For
9280 Skypark Court
Hazardous Locations
Class I Group D; Class I Zone 1 IIA; T3

Gas, Liquid, or Dual Fuel Turbine Driven Compressor Sets Models:
l "SATURN" 1590 HP max, Control Circuits 24 V dc, 15 A max.

l "CENTAUR" 6270 HP max, Control Circuits 24 V dc, 15 A max.
l "TAURUS 60" 7150 HP max, Control Circuits 24 V dc, 15 A max.
l "MARS" 15000 HP max, Control Circuits 24 V dc, 15 A max.
Gas, Dual Fuel Turbine Driven Compressor Set Model
l "TITAN 130", 19,500 Hp, Control circuits 24 V dc, 15 A max.
Gas, Liquid, or Dual Fuel Turbine Driven Mechanical Drive PackagesModels:
l "SATURN" 1590 HP max, Control Circuits 24 V dc, 15 A max.

l "CENTAUR" 6270 HP max, Control Circuits 24 V dc, 15 A max.
l "MARS" 15000 HP max, Control Circuits 24 V dc, 15 A max.
Gas, Dual Fuel Turbine Driven Mechanical Drive Packages Model:
l "TITAN 130" 19,500 Hp, Control circuits 24 V dc, 15 A max.
dt
... 11/1/2002
Page 1 of 1
CUSTOMER CLASS FILE

3211-07 026165-0-000
Caterpillar Company
INDUSTRIAL CONTROL
9280 Skypark Court EQUIPMENT-Miscellaneous
Apparatus
l Turbine Control Consoles, 120 V ac, 20 A max or 24 V dc, 100 a max, may have Intrinsically
Safe output circuits per wiring diagram, free standing, or wall mounting.
... 11/1/2002
Page 1 of 1
CUSTOMER CLASS FILE

4218-01 026165-0-000
Caterpillar Company
ELECTRIC GENERATING
9280 Skypark Court
PLANTS-For Hazardous Locations
Class I Division 2 Group D; Class I Zone 2 IIA; T3

Gas, Liquid, or Dual Fuel Turbine Driven Generator Sets Models:
l "SATURN" 1.2 MW max, 6.6 KV max, 3 phase, 50 or 60 Hz; Control Circuit 24 V dc, 15 A max.
l "CENTAUR" 4.6 MW max, 13.8 KV max, 3 phase 50 or 60 Hz; Control Circuit 24 V dc, 15 A
max.
max.
max.
l "MARS" 10.7 MW max, 13.8 KV max, 3 phase, 50 or 60 Hz; Control Circuit 24 V dc, 15 A max.
Gas or Dual Fuel Turbine Driven Generator Sets:
l "TITAN 130", 12.8MW max, 3 phase, 13.8 KVmax, 50 or 60 Hz, Control Circuits 24 Vdc,
15Amax.
Notes:
1. This Certification covers electrical features only.

2. The above model designations may include suffixes to designate driven equipment.
3. The skids may be equipped with auxiliary components such as Starter Motors, Lube Oil Pumps,
Lube Oil Heaters etcetera, each requiring a separate electrical supply and each bearing the
necessary data nameplate.
dt
... 11/1/2002
Page 1 of 2
CUSTOMER CLASS FILE
Federal Signal Corporation 4812-04 005835-0-000

2645 Federal Signal Dr SIGNAL APPLIANCES-Audible
University Park, IL, 60466-3195
l Horns, resonating type, for outdoor use; Model 55, 110/120V, 60Hz, 0.75A and 250V, 60Hz,
0.3A.
l Horns vibrating type, Models 350, 6V, 1.9A; 12V, 0.9A, 12V, 1.8A; 24V, 0.9A;120V, 0.18A;
240V, 0.09A ac input. Model 350D, ac polarized, 120V, 0.16A.Models 450, dc, 4.4 - 9V, 0.25A;
6V, 1A; 9-15.6V, 0.125A; 12V, 0.5A; 18-31.2V,0.063 or 0.035A; 24V, .25A; 48V, 0.125A;
125V, 0.05A; 250V, 0.025A; 300V,.030A, dc input. Model 450D dc polarized horns, 4.4-9V,
.25A; 9-15.6V, 0.125A; 18-31.2V, 0.063 or 0.035A; 48V, 0.125A.
Note: Suffix letters CC, FB, NB, SF, PR, PR2, FBL or FG are used to indicate thy type of mounting
accessories. The suffix letter WB indicates a weatherproof back box for outdoor use.
l Bells, 4, 6, 10 in size, vibrating type, Models 500, 240V and less, 50/60Hz, 1.6A and less; 600,
250V dc and less,1.6A and less; single-stroke type, Models 700, 240V and less, 50/60Hz, 3.2A
and less; 800, 250V dc and less, 1.6A and less, with or without suffix letters CC, FB, FBL, FG,
NB, NBL or SF for indoor use and WB (back box) for outdoor use.
l Sirens, motor-driven, for outdoor use; Type A, 120V ac/dc, 1.25A; Type L, 120/125V ac/dc,
1.95A or 240/250V ac/dc, 1.0A; Type No 2, 220V, 60Hz, 12A, 2 hp, single-phase intermittent
duty; Type No 5, 220V, 60Hz, 60A, single-phase, 220V, 60Hz, 35A polyphase, 230V dc, 45A and
250V dc, 41A, 5 hp; "Thunderbolt" Models 1000* and 1003*, 220/440V or 550V, or 600V
(different models), 60Hz, 34/17A, or 14A, or 12A total respectively, 3-phase ac input; blower
motor, 7 hp; rotator motor, 1/3 hp; chopper motor, 2 hp.
l * Time rating 10 min "on"; 50 min "off".
l Siren control panel for indoor use; Model RCM-1 for use with siren, Model 1000 or 1003.
l Auxiliary tone-modulating control panel for indoor use; Model RCM-2 for use with siren, Model
1003 and control panel RCM-1 above.
l Amplified speakers/audible signals, for indoor or outdoor use,(Enclosure 3R): Model ASHP, 24V
dc, 0.55A or 120V, 50/60Hz, 0.28A; Model ASLP, 24V dc, 0.07A; Models 50GC and 50GCB,
24V, 50/60Hz, 0.22A or 24V dc, 0.07A or 120V, 50/60Hz, 0.033A or 230/240V, 50/60Hz, 0.02A;
Model 300D, 24V dc, 0.6A or 120V, 60Hz, 0.28A; Model 300GC, 24V, 50/60Hz, 1.25A or 24V
dc, 0.55A or 48V dc, 0.35A or 120V, 50/60Hz, 0.27A or 240V, 50/60Hz, 0.12A; Model 302GC,
24V, 2.5A or 24V dc, 1.1A or 120V, 50/60Hz, 0.5A or 240V, 50/60Hz, 0.2A; Model 300, 250V
dc, 0.072A.
l Plug-in modules, Models TM-1 through -11, -11A, -12, -13, -33; TC-BL, -BP, -HL, -HN, -ST, -
SW, -TW, -YP, -WL, -YW, UTM, PTCK25, PTCK70, AM25CK, AM70CK, 300CK, 300CKS,
for use with the above amplified speakers.
l Intercoms, Models 310-MV, (Type 4X), 310LD-MV, 310-MV-MNC, 24V dc or 120/240V,
50/60Hz, 0.26A max; microphone conversion kit K850A016 and slave conversion kit K850A017.
l Speakers, for indoor or outdoor use, (Enclosure 3R), 25 or 70V ac, Models AM300, SPHP, 0.5,
... 12/3/2002
Page 2 of 2
1.0, 2.0, 7.0 and 15W power taps; AM302, 7, 15 and 30W power taps; indoor only, Models
AMR4, AMS4, AM50, 0.25, 0.5, 1.0 and 2.0 power taps; AMM1, 25V, 1.0W.
l Signal appliance amplifiers, indoor or outdoor, 120/240V, 50/60Hz, Models 3200, 3.5/1.625A;
3400, 6.5/3.25A.
l Telcom remote ringer devices, Models TELB 120, TELC 120, TELH 120, TELS 120, 120V,
50/60Hz, 0.24A max.
/dlm
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE

2645 Federal Signal Dr SIGNAL APPLIANCES-Systems
l Public address signal generators, Models 300VSC-1, 300VSC-1044SB, 300VSC-1044-1, 300MC,

120V, 50/60Hz, 0.21A or 24V dc, 0.76A; 300MB, 300SCW-1, 120/240V, 50/60Hz, 0.21/0.11A or
24V dc, 0.76A; 310DT, 120V, 50/60Hz, 0.25A or 24V dc, 0.60A.
l Fire alarm control unit Model 300SSC, 120V, 50/60Hz, 0.125A.
l Rotating beacon lights, indoor/outdoor use, Type 4X, 120V, 50/60Hz, Models 371L, 0.80A,
100W max; 371, 1.75A, 200W max.
l Stackable visual or visual and audible signal system, "Litestak", Models LSB and LSBS (base
modules); light modules, Models LSL-024, LSLD-024, 24V dc, 3.8A (wtih five modules); LSL-
120, LSLD-120, 120V ac, 1.13A (with five modules); LSL-240, 240V ac, 0.6A (with five
modules); sound modules, Models LSS-024, 24V dc, 0.170A; LSS-120, 120V ac, 0.07A; LSH-
024, 24V dc, 0.07A; LSH-120, 120V ac, 0.04A; LSH-240, 240V ac, 0.04A.
Note: Models LSL may have Suffixes G, A, R, B, C or M.
l Flashing warning lights, outdoor use, Type 3R, Model 141, 120V, 60Hz, 40W; 141ST, 120V,
50/60Hz, 0.045A.
l Strobe lights, indoor/outdoor use, Type 3R, 4X; Models FB2PST, FB24ST and FB2MST, 12/24V
dc, 1.7/0.7A, or 120V, 50/60Hz, 0.25A, or 240V, 50/60Hz, 0.20A; Model 131ST, 120V, 50/60Hz,
0.6A or 240V, 50/60Hz, 0.3A; Models 131DST and 371DST, 12-24V dc, 3.0-1.9A or 120V,
50/60Hz, 0.6A, or 240V, 50/60Hz, 0.3A; VALS, 120/240V, 50/60Hz, 0.060/0.030A; 12/24V dc,
0.180/0.080A.
l Fire alarm control unit Model 300Z, 120V, 50/60Hz, 310mA; trouble and alarm contacts 24V dc,
2A (non-ind).
l Power supply/battery charger, Model PS150, 120/240V, 50/60Hz, 0.45/0.25A input; 24V dc, 1.2A
max output; trouble relay 125V ac, 0.4A, 24V dc, 1.25A.
l Rotating beacon lights, indoor or outdoor, Type 3R, 120V, 60Hz, Models 27S, 0.64A; 27SD,
0.77A; 121S, 0.33A; 225, 0.22A.
l Audio/Visual Signal Appliances, for indoor/outdoor use, Type 3R enclosure, Models AV1,
AV1LED, AV1ST, rated 120V ac, 60Hz, 0.27A, 0.10A, 0.15A; or 24V dc, 0.98A, 0.16A, 0.39A
l Visual Signal Appliance for indoor/outdoor use, Type 4X enclosure, Models LP3 and LP6 strobe,
rated 120V ac, 0.1A, 50/60Hz, 230-240V ac, 0.07A, 50/60Hz; or 12-48V dc, 0.44-0.1A; Model
LP3 (Incandescent) rated 12V dc, 1.04A; 24V dc, 0.67A; 120V ac, 50/60Hz, 0.13A; Model LP3
(LED), rated 24V ac/dc, 50/60Hz, 0.080A; 120V ac, 50/60Hz, 0.045A.
/mek
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE

SIGNAL APPLIANCES-Audible -
2645 Federal Signal Dr
Certified to US Standards
l Bells, 4, 6, 10 in size, vibrating type, Models 500, 240V and less, 50/60Hz, 1.6A and less; 600,
250V dc and less,1.6A and less; single-stroke type, Models 700, 240V and less, 50/60Hz, 3.2A
and less; 800, 250V dc and less, 1.6A and less, with or without suffix letters CC, FB, FBL, FG,
NB, NBL or SF for indoor use and WB (back box) for outdoor use.
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE

SIGNAL APPLIANCES-Systems -
2645 Federal Signal Dr
l Audio/Visual Signal Appliances, for indoor/outdoor use, Type 3R enclosure, Models AV1,
AV1LED, AV1ST, rated 120V ac, 60Hz, 0.27A, 0.10A, 0.15A or 24V dc, 0.98A, 0.16A, 0.39A.
l Visual Signal Appliance for indoor/outdoor use, Type 4X enclosure, Models LP3 and LP6 strobe,
rated 120V ac, 0.1A, 50/60Hz, 230-240V ac, 0.07A, 50/60Hz or 12-48V dc, 0.44-0.1A; Model
LP3 (Incandescent) rated 12V dc, 1.04A, 24V dc, 0.67A; 120V ac, 50/60Hz, 0.13A; Model LP3
(LED), rated 24V ac/dc, 50/60Hz, 0.080A; 120V ac, 50/60Hz, 0.045A.
l Rotating Beacon Lights, indoor/outdoor use, Type 4X, 120V, 50/60Hz, Models 371, 1.75A; 371L,
0.80A.
l Stackable visual or visual and audible signal system. "Litestak", Models LSB and LSBS (base
modules); light modules, Models LSL-024, LSLD-024,
24V dc, 3.8A (with five modules); LSL-120, LSLD-120, 120V ac, 1.13A (with five modules);
LSL-240, 240V ac, 0.6A (with five modules); sound modules, Models LSS-024, 24V dc, 0.170A,
LSS-120, 120V ac, 0.07A; LSH-024, 24V dc, 0.07A; LSH-120, 120V ac, 0.04; LSH-240, 240V
ac, 0.04A.
Note: Models LSL may have Suffixes G, A, R, B, C or M.
/mek
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE
Honeywell Sensing and Control 6231-09 004442-C-000

LAMPHOLDERS-Incandescent -
11 West Spring St
Miscellaneous
Freeport, IL, 61032
l Inc pilot lights, Series 3J and 3C, 28V max.
Notes:
1. Suffix letters and numbers may be added to the above series designations to denote mechanical
variations.
2. Supplied only to manufacturers for the assembly of Certified electrical equipment.
l Pilot lights, Series AML41, incandescent; AML42, AML45, LED; AML43, neon.
l Low voltage LED type, pilot lights, Series MML41, 20mA, 3V max; MML44, 20mA, 2.5V max;
MML46, 60mA, 5V max.
l Neon lamp type, pilot light, Series MML43, 250V max.
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE

INDUSTRIAL CONTROL
11 West Spring St EQUIPMENT-Motor Controllers -
Magnetic
Freeport, IL, 61032
l Cat Nos 3MN1, 3MN6, 3MN8, 3MN17, 3MN19, 3MN241, open-type, single-pole, double-throw
manual motor controllers, rated 15A, 120, 240, 480 or 600V ac, 1/2 hp, 120V ac, 1 hp, 240V ac,
0.8A, 115V dc, 0.4A, 230V dc, pilot duty, 690VA, 600V ac max or B600.
Note: Open type controllers are Certified as components for use only in other Certified equipment where
the suitability of the final combination is to be determined by the Canadian Standards Association.
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE

INDUSTRIAL CONTROL
Manual
Freeport, IL, 61032
l Switches, Type WW, open types, 1-, 2- or 3-pole, single throw contacts. Rating Symbols: 1-pole:
A, E; 2-pole: A, C, D, E, F, G; 3-pole: C, D, E and H. Maximum Ratings:
l A 16A, 1/2 hp - 125/250V ac; 3A"L" 125V ac; 150VA pilot duty - 125/250V ac; 24V dc, 2A.
l B (1 pole) 16A (inductive) at 125/250V ac; 3/4 hp at 125/250V ac; 150VA pilot duty at 125/250V
ac, 3A"L", 125V ac.
l C 15A, 1/2 hp - 125V ac; 10A, 1/2 hp - 250V ac; 3A"L" - 125V ac; 150VA pilot duty - 125/250V
ac.
l D 15A, 1/2 hp - 125V ac; 10A, 1/2 hp - 250V ac; 3A"L" - 125V ac; 150VA pilot duty - 125/250V
ac; 0.1A - 125V ac/dc; 24V dc, 2A.
l E 0.1A - 125V ac/dc.
l F 16A, 1/2 hp - 125/250V ac; 3A"L" - 125V ac; 150VA pilot duty - 125/250V ac; 0.1A - 125V
ac/dc.
l G 5A, 125V ac; 24V dc, 2A.
l H 5A (inductive), 125V ac; 2A, 24V dc; 0.1A, 125V ac/dc.
Notes:
1. Suffix letters and/or numbers are added to type designation to indicate type of contact, circuitry,
mechanical variation, electrical ratings and terminal size.
2. For Type WW controllers, all ampere ratings have been tested to 100,000 operations endurance.
3. Open type switches are Certified as components for use only in other Certified equipment, where
the suitability of the combination is to be determined by the Canadian Standards Association.
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE

INDUSTRIAL CONTROL
11 West Spring St EQUIPMENT-Miscellaneous
Apparatus
Freeport, IL, 61032
l Illuminated pushbutton switches, Series 3 with suffix, 1 or 2 pole, single or double throw; with
suffix -A, -E, -F and -G, rated 125V ac, 5A, 28V dc, 3A or 5A resistive; with suffix -B, -H, -K
and -L, rated 125V ac, 0.1A.
Note: Certified for use only as a component of other certified equipment and in circuits where the power
is limited by a transformer, rectifier, voltage divider or similar devices (overload devices and fuses are
excluded) and where the short circuit limit between conductors and between conductors and ground is
1500V ac max and where a fire hazard will not result from a short circuit.
l Switches, Type 1DP with suffixes, open type, rated 14A (inductive), 250V ac 16A (inductive)
277V ac; 3/4 hp, 125/250V ac; 150VA pilot duty at 125/250V ac.
l Switches, type 2DP6 with suffixes, open type, two pole, single throw contacts, contacts rated cct.
No 1, 1A, 125V ac; cct No 2, 14A, 250V ac; 3/4 hp, 125/250V ac; 150VA, pilot duty 125/250V
ac.
Note: The Type 1DP and 2DP6 switches have been endurance tested for 100,000 operations.
... 12/3/2002
Page 1 of 6
CUSTOMER CLASS FILE

11 West Spring St SWITCHES-Snap - Special Use
Freeport, IL, 61032
THE FOLLOWING COMPLY WITH CSA STD C22.2 No 55-M1986:
l Cat No DB-RH with suffix numerals 2-7 incl., dpdt.

l Code No L-1, 15A, 125, 250 or 480V ac.
l Type DM, single-pole, single- and double-throw, Code No L22, 1A, 125V ac, L93, 10A, 125-
250V ac, 1/3 hp, 125 or 250V ac, Code L157, 10A, 1/3 hp, 125, 250 or 277V ac, Code L181, 10A,
1/2 hp, 125, 250, 277V ac, Code L226, 5A, 125-250V ac, Code No 263, 10A, 1/2 hp, 125, 250,
277V ac, 2A, 24V dc, Cat No 1DM, 2DM, 3DM, 4DM, 13DM, 14DM, with suffixes 1 to 1000,
with or without letters A to Z; with or without numbers designating customer part number, type of
terminal, angle of terminal or degree of overtravel.
l Type 2DM600, Circuit 1, Code L229, 0.1A, 125V, 1/10 hp, 125V ac, Circuit 2, Code L230, 0.1A,
125V.
l Lighted Types DM, SPDT or SPST, Code No L93, 10A, 125-250V ac, 1/3 hp, 125 or 250V ac.
l Type HS, Code L22, 1A, 125V ac, Code L244, 1A, 125V ac, 28V dc, Code L277, 1A, 125V ac;
5A, 28V dc, Cat Nos 1HS, 4 HS, 101HS, 102HS, Code L267, 5A, 28V dc, with or without suffix
numbers.
l Type HT, Code L110, 3A, 125/250V ac, 1/1 hp, 125V ac, 1/6 hp, 250V ac, with prefix numbers 1,
2, 3 or 4 and suffix numbers 1 to 1000, may be used to 1000F.
l Type 4SE, Code L4, 5A, 250V ac, Cat Nos 4SE1, 4SE2, 4SE3, 47SE1, with or without suffix
numbers; Code L151, 5A, 250V ac, 5A, 30V dc, Cat No 4SE151.
l Type TK with prefix and suffix numbers.
l Code L191, 15A, 125, 250 or 277V ac, 5A, 125V ac (tungsten), 1/2 hp, 125V ac, 1 hp, 250 or
277V ac.
l Code L192, 10A, 125, 250 or 277V ac, 3A, 125V ac (tungsten), 1/4 hp, 125V ac, 1/2 hp, 250 or
277V ac.
l Type TS with prefix 1 or 3 followed by 1, 2, 3 or
l Code L54, 15A, 125-250V ac, 1/3 hp, 125V ac, 3/4 hp, 250V ac, 1/2A, 125V dc, 1/4A, 250V dc.
l Code L55, 15A, 125-250V ac, 1/2 hp, 125V ac, 1 hp, 250V ac, 1/2A, 125V dc, 1/4A, 250V dc.
l Code L191, 15A, 125-277V ac, 5A, 125V ac (tungsten), 1/2 hp, 125V ac, 1 hp, 250-277V ac.
l Code L192, 10A, 125-277V ac, 3A, 125V ac (Tungsten), 1/4 hp, 125V ac, 1/2 hp, 250-277V ac.
l Prefix numeral 2 (e.g. Cat No 212TS15-1), indicates a switch provided with a panel mounting
seal. Prefix numeral 5 (e.g. 512TS15-1) indicates a neoprene seal on the toggle. Suffix numeral 95
immediately following "11TS" or "12TS" indicates a switch with quick-disconnect type male
terminals to accept either "AMP" or "ARK-LES" female solderless quick-disconnect wire
connectors.
l Type XL, Cat No 37XL, 5V dc, 20mA dc; Cat No 47XL, 6 to 16V dc, 40mA dc.
l Type VX, 4.5 to 24V dc, 0.015A max.
... 12/3/2002
Page 2 of 6
l Lighted pushbutton, Series 2 with suffixes, rating codes of component switches, Series 4,
followed by suffixes, Code L22, 1A, 125V ac; Code L4, 5A, 250V ac; Code L99, 10A, 1/4 hp,
125 or 250V ac.
l Types NR, NT, TP, TL, Code L191, 15A, 125/250/277V ac, 1/2 hp, 125V ac, 1 hp, 250V ac, 5A,
125V ac (tungsten); Code L192, 10A, 125/250/277V ac, 1/4 hp, 125V ac, 1/2 hp, 250V ac, 3A,
125V ac (tungsten).
l Type TW, Code L117, 5A, 125V ac.
l AML10 Series, electronic switch for use in business machines, lighted or unlighted, electrical
rating 40mA max, 16V dc max; pushbutton, ALM11, 12 with suffixes paddle or rocker, AML13,
14, 15, 16 with suffixes.
l AML20 Series lighted or unlighted, Code L173, 3A, 125V ac 2A, 250V ac, Code L203, 0.1A,
125V; pushbutton AML21, 22 with suffixes; paddle or rocker AML23, 24, 25, 26 with suffixes,
AML27, Code L173, 3A, 125V ac, 2A, 250V ac, Code L203, 0.1A, 125V dc.
l AML21 Series, Cat No AML21BBAZCD-001, lighted, with 2 poles rated code L173, 3A, 125V
ac, two poles rated code L203, 0.1A, 125V ac.
l AML30 Series, lighted or unlighted pushbutton AML31, 32 with suffixes, Code L29, 10A, 250V
ac, Code L93, 10A, 125-250V ac, 1/3 hp, 125-250V ac; paddle or rocker AML33, 34, 35, 36 with
suffixes, Code L186, 15A, 125-250V ac.
l Series MML31, MML83 with suffixes, 6A, 125-250V ac, 2A, 30V dc, 1A, 125V ac (tungsten),
1/10 hp, 125V ac.
l Series MML33 and MML34 with suffixes, single or double-pole, single-throw, 6A, 125V ac; 4A,
250V ac; 2A, 30V dc; 1A, 125V ac (tungsten); 1/10 hp, 125V ac.
l Series MML11, 5V sink.
l Series MML21, MML82 with suffixes silver contacts 1A, 125V ac, gold contacts 0.1A, 30V dc.
l Series MML23, MML24 with suffixes; silver contacts, 1A, 125V ac, gold contacts, 0.1A, 30V dc.
l Type AC, spdt Code No L195, 13A, 1/2 hp, 125 or 250V ac; 1/2A, 125V dc; 1/4A, 250V dc; 5A,
125V ac "L", Cat No 2AC, 3AC, 4AC, 22AC, 23AC, 24AC, with suffixes 1 to 99, with or without
suffix D with numerals, followed by suffix UL.
l Type TB with prefix and suffix numbers.
l Code L22, 1A, 125V ac. Code L25, 10A, 125-250V ac, 1/2 hp, 125V ac.
l Type V4.
l Code No L4, 5A, 250V ac, spdt; 5A, 125 or 250V ac, sp, Cat Nos V4-8 to V4-100, the various
catalogue numbers identify a particular variation of the basic switches, Cat Nos V4-12 (SPNO)
and V4-14 (SPDT), supplied only to manufacturers for assembly of Certified electrical equipment.
l Code L279, 1A, 125V ac; 0.1A, 30V dc, Cat No BZ-RD722-A2.
l Cat No BE-2R2423-P5 rated 30A, 125, 250 or 277V ac. Res: 25A, 125, 250 or 480V ac; 1 hp,
125V ac; 2 hp, 250 or 480V ac; pilot duty 750VA, 480V ac max; 30A res, 277V ac, 71C (30,000
ops).
l Type 1PL-6PL, 111PL; with suffix numbers 1-1000 and 6700-6799, sp with Code L62.
l Type 9PL, with suffix numbers 1-1000, dp, with Code L62 and L251.
l Type 14PL. with suffix numbers 1-1000, sp, with Code L81. Ratings:
l Code L62, 15A, 125-250V ac, 3/4 hp, 125V ac, 1-1/2 hp, 250V ac.
l Code L81, 22A, 125-250-277V ac, 3/4 hp, 125V ac, 1-1/2 hp, 250V ac.
l Code L251, 0.1A, 30V dc.
l Standard Types B, G and R.
l Code No L-1, 15A, 125, 250 or 480V ac.
l Code No L-8, 10A, 125, 250 or 480V ac.
l Code No L-9, 10A, 125, 250 or 480V ac, 1/2A, 125V dc, 1/4A, 250V dc.
l Code No L96, 15A, 125, 250 or 480V ac, 1/2A, 125V dc*, 1/4A, 250V dc*, 1/8 hp, 125V ac, 1/4
hp, 250V ac.
l Single-throw, Cat Nos G*, GC, GD*, GJ, GK, GP, GT*, R*, RC, RD*, RJ, RK, RP, RT*, double-
... 12/3/2002
Page 3 of 6
throw, Cat Nos B*, BC, BD*, BJ, BK, BP, BT*.
l Code No L-5, 17A, 125 or 250V ac, Cat No R-H.
l Code L-17, 20A, 125, 250 or 480V ac, 3/4 hp, 125V ac, 1-1/2 hp, 250V ac. Above catalogue
numbers may have suffix numbers and/or letters.
*Only those catalogue numbers marked with an asterisk and having 2, 3, 4, 5, 6, 7, 8, 9 as the first digit
of the suffix, or where "X" appears in the suffix are rated dc and/or ac. All others are rated ac only.
l Type A, single-pole**, single-throw, Cat Nos WA, WAC, WAD, WAE, WAF, WAJ, WAK,
WALK, WALM, WAP, WAT, WAV, YA, YAC, YAD, YAE, YAF, YAJ, YAK, YALK, YALM,
YAP, YAT, YV, followed by a numeral from 1-9 incl., or combination thereof. Single-pole**,
double-throw, Cat Nos BA, BAC, BAD, BAE, BAF, BAJ, BAK, BALK, BALN, BAP, BAT,
BAV, followed by numerals from 1-9 incl., or combination thereof. The catalogue numbers may
have suffix numerals or with one or more of the following suffix letters with or without any
combination of numerals, A, B, C, D, E, F, L, M, N, P, Q, R, S, T, TB, TC, TN, V, W, X.
l Code No L145, 2A, 600V ac, 20A, 125, 250 or 480V ac, 10A, 125V ac, (suitable for controlling
tungsten filament lamp loads), 1 hp, 125V ac, 2 hp, 250V ac, 1/2A, 125V dc, +A, 250V dc.
l Load L65, 15A, 125, 250 or 480V ac, 1/2 hp, 125V ac, 1 hp, 250V ac.
l Code No L50, 17A, 125, 250 or 480V ac, 1 hp, 125V ac, 2 hp, 250V ac, 10A, 125V ac (suitable
for controlling tungsten filament lamp loads), 1/2A, 125V dc, +A, 250V dc.
l Code No L58; 25A, 125, 250, or 480V ac; 3/4 hp, 125V ac; 1-1/2 hp, 250V ac; 1A, 125V dc;
0.5A, 250V dc. (Ref. Report -16).
l Code No L33, 20A, 125, 250 or 480V ac, 1 hp, 125V ac, 2 hp, 250V ac, 0.3A, 125V dc, 0.15A,
250V dc.
l Code No L23, 20A, 125, 250 or 480V ac, 10A, 125V ac (suitable for controlling tungsten filament
lamp loads), 1 hp, 125V ac, 2 hp, 250V ac, 1/2A, 125V dc, 1/4A, 250V dc.
l Code No L-19, 15A, 125, 250 or 480V ac, 3/4 hp, 125V ac, 1-1/2 hp, 250V ac, 1/2A, 125V dc,
1/4A, 250V dc.
l Code No L17, 20A, 125, 250 or 480V ac, 3/4 hp, 125V ac, 1-1/2 hp, 250V ac. Code No L15, 15A,
125, 250 or 480V ac, 10A, 125V ac (suitable for controlling tungsten filament lamp loads), 3/4 hp,
125V ac, 1-1/2 hp, 250V ac, 1/2A, 125V dc, 1/4A, 250V dc.
l Code No L97, 20A, 125, 250 or 480V ac, 10A, 125V ac (tungsten), 1/2A, 125V dc, 1/4A, 250V
dc, 1-1/2 hp, 125V ac, 2 hp, 250V ac.
l Code No L22, 1A, 125V ac.
l Code L178, 20A, 125, 250 or 277V ac, 3/4 hp, 125V ac, 1-1/2 hp, 250V ac.
l Code L179, 20A, 125, 250 or 277V ac, 15A, 480V ac, 5A, 125V ac (tungsten), 1 hp, 125V ac, 2
hp, 250V ac, 1/2A, 125V dc, 1/4A, 250V dc.
l Cat No 6AS216, Code L23, 20A, 125, 250, 480V dc, 10A, 125V ac (tungsten), 1 hp, 125V ac, 2
hp, 250V ac, 1/2A, 125V dc, 1/4A, 250V dc.
l Dpst, Cat Nos DO, DC; Code No L-59, 10A, 125 or 250V ac, 0.3A, 125V dc, 0.15A, 250V dc,
double-throw DT; supplied only to manufacturers for use in Certified factory wired assemblies
where suitable terminal lugs, or equivalent, will be used for terminal connections. Suffix numerals
with following suffix letters may be added to catalogue numbers, A-F incl., K-N incl., P-T incl.,
TB, TC, TN, V, W, X, with or without and combination of numerals.
l Type M, single-pole, single and double-throw, Code No L101, 22A, 125, 480V ac, 1/4 hp, 125V
ac, 1/2 hp, 250V ac, 1/2A, 125V dc, 1/4A, 250V dc; Code L102, 22A, 125-480V ac, 1/4 hp, 125V
ac, 1/2 hp, 250V ac; Code L161, 22A, 125, 250 or 480V ac, 1/2 hp, 125V ac, 1 hp, 250V ac; Code
L167, 22A, 125, 250 or 277V ac, 3/4 hp, 125V ac, 1-1/2 hp, 250V ac, Code L316, 15A, 480V ac,
22A, 125, 277V ac, 1/4 hp, 125V ac, 1/2 hp, 250V ac; Cat Nos BM, WM, YM, with or without
prefix letters D, E, F, T, V, or numeral 6, with suffixes A,B, D, E, L, M, N, P, Q, R, S, T, W or X
... 12/3/2002
Page 4 of 6
with or without numbers and may be followed by suffixes A, B, D, P or PC with or without

numbers.
l Type MHY-1R1, MHW-1R1, 15A, 480V ac, 1/4 hp, 125V ac, 1/2 hp, 250V ac, 24.6 LRA, 4.1
FLA, 277V ac, with solder lugs, 22A, 277V ac max.
l Type MT, single-pole, Code No L20, 10A, 125V, 1/8 hp, 125V, Code L168, 10A, 125V, 1/4 hp,
125V, double-throw, Cat Nos MT-4R, -4R-A28, -4R-P1, -4RL, -4RL-A28, -4RB, -4RL-P1, -4RQ,
-4RV, -4RL2, -4RL2-A28, -4R12-P1.
l Type PL, Code L62, 15A, 125-250V ac, 3/4 hp, 125V ac, 1-1/2 hp, 250V ac, single-pole, Cat Nos
1PL-6PL incl.; Code L81, 22A, 125-250-277V ac, 3/4 hp, 125V ac, 1-1/2 hp, 250V ac, single-
pole, Cat No 14PL; with suffix numbers 1-1000 incl., designating variations such as circuitry
(normally open, normally closed single-throw or double-throw); bend and shape of terminals;
type, length and colour of actuator; special marking such as customer part number; special
handling and/or inspection procedures, etc. The prefix numbers 1-6 incl. in the catalogue numbers
designate side mounting versions, panel mount versions, integral auxiliary actuator versions,
special phenolic compounds, side mount with overtravel plunger mechanism, panel mount with
overtravel plunger mechanism respectively.
l Type Z.
l Code L-4, 5A, 250V ac.
l Code L-8, 10A, 125, 250 or 480V ac.
l Code L-9, 10A, 125, 250 or 480V ac, 1/2A, 125V dc*, 1/4A, 250V dc*.
l Code L-22, 1A, 125V ac.
l Code L-34, 5A, 125/250/480V ac.
l Code L-35, 5A, 125, 250 or 480V ac, 1/2A, 125V dc*, 1/4A, 250V dc*.
l Code L-67, 15A, 125, 250, 480V ac, 1/2A, 125V dc*, 1/4A, 250V dc*, 1/4 hp, 125V ac, 1/2 hp,
250V ac.
l Code L-74, 15A, 125, 250 or 480V ac, 2A, 600V ac, 1/2A, 125V dc*, 1/4A, 250V dc*, 1/8 hp,
125V ac, 1/4 hp, 250V ac.
l Code L-84, 15A, 125, 250 or 480V ac, 1/2A, 125V dc*, 1/4A, 250V dc*, 1/2 hp, 125V ac, 1 hp,
250V ac.
l Code L-87, 15A, 125, 250 or 480V ac, 1/2A, 125V dc*, 1/4A, 250V dc*, 1/4 hp, 125 or 250V ac.
l Code L-95, 10A, 250, 277 or 480V ac, 1/8 hp, 125V ac, 1/4 hp, 250V ac.
l Code L-96, 15A, 125, 250 or 480V ac, 1/2A, 125V dc*, 1/4A, 250V dc*, 1/8 hp, 125V ac, 1/4 hp,
250V ac.
l Code L-103, 15A, 125-250-480V ac, 1/8 hp, 125V ac, 1/4 hp, 250V ac.
l Code L-144, 2A, 600V ac, 15A, 125, 250 or 480V ac, 1/2A, 125V dc*, 1/4A, 250V dc*, 1/4 hp,
125V ac, 1/2 hp, 250V ac.
l Code L-147, 15A, 125, 250 or 480V ac, 1/8 hp, 125V ac, 1/4 hp, 250-277V ac.
l Code L197, 15A, 125/250/277V ac, 1/8 hp, 125V ac, 1/4 hp, 250V ac, 1/2A, 125V dc, 1/4 hp,
250V dc.
l Single-throw, Cat Nos WZ*, WZD*, WZE*, WZLN*, WZT*, YZ, YZD*, YZE*, YZLN*, YZT*,
YZV*; double-throw, Cat Nos BZ*, BZD, BZE, BZLN*, BTZ*, BZV* may have additional
suffix letters or numbers.
l Code L-5, 17A, 125 or 250V ac, Cat Nos WZ-H, WZD-H, WZE-H, WZT-H, WZV-H with or
without additional suffix letters or numbers.
l Code L-13, 10A, 125V ac, 5A, 250V ac, single-throw, Cat Nos WZ-K, WZO-K, WZE-K, WZT-
K, WZV-K, YZ-K, YZD-K, YZE-K, YZT-K, YZV-K; double-throw, BZ-K, BZD-K, BZE-K,
BZT-K, BZV-K with or without additional suffix letters or numbers.
l Code L-130, 5A, 125, 250 or 480V ac, 1/10 hp, 125V ac, 1/6 hp, 250V ac, Cat Nos BZ-R, BZ-1R,
... 12/3/2002
Page 5 of 6
BZ-2R.
l Code L-189, 11A, 125, 250 or 480V ac, 1/8 hp; 125V ac, 1/4 hp, 250V ac, Cat No BZ-PP1.
l Code L-73, 15A, 125, 250 or 480V ac, 1/2 hp, 250V ac, 1/4 hp, 125V ac, 1A, 125V dc, 0.5A,
250V dc, Code L180, 15A, 125, 250, 480V ac, 2A, 600V ac, 1/4 hp, 125V ac, 1/2 hp, 250V ac,
1A, 125V dc, 0.5A, 250V dc, spst or spdt shorting bar switches Cat Nos BZ, BZD, BZE, BZF,
BZLN, BZT, BZV, WZ, WZD, WZE, WZF, WZLN, WZT, WZV, YZ, with or without additional
suffix number or letters. The switches are not intended for connection in a circuit where a
condition of opposite polarity may exist between opposite sides of the contact structure. Code L-
88, 15A, 125, 250, or 480V ac, 1/2A, 125V dc*, 1/4A, 250V dc*, 1/3 hp, 125 or 250V ac, Cat Nos
WZ-2R with or without additional letters or numbers. Code L22, 1A, 125V ac.
*Only those catalogue numbers marked with an asterisk and having 2, 3, 7, as the first digit of the suffix
except Cat Nos BZLN, WZLN, YZLN, or catalogue numbers where the letter "X" appears in the suffix
are rated dc and/or ac. All others are rated ac only.
l Types SM, 32SM, single-pole, single or double-throw, Cat No SM with prefix nos 1, 11, 12, 21,
22, 23, 41, 42, 142, 51, 54, 101, 111, 112, 121, 122, 141, 151, 301, 302, 311, 312, 321, 322, 341,
342, 401, 411, 412, 421, 422 with suffix nos 1 through 10,000 with or without designation T or H,
with or without numbers; those catalogue numbers with suffix D are supplied only to
manufacturers for use in factory wired assemblies or suitable terminal lugs of equivalent will be
used for terminal connections.
l Code L4, 5A, 250V ac.
l Code L150, 5A, 250V ac, 1A, 30V dc.
l Code L151, 5A, 250V ac, 5A, 30V dc.
l Code L171, 0.1A, 125V ac, 0.1A, 30V dc.
l Code L172, 0.3A, 125V dc, 5A, 250V ac.
l Code L184, 1A, 125V ac, 1A, 30V dc.
l Code L185, 4A, 250V ac, 1/10 hp, 125V ac.
l Code L190, 11A 125/250V ac, 1/4 hp 125/250V ac, 5A, 30V dc.
l Code L212, 11A, 125/250V ac, 5A, 30V dc, 1/2A, 125V dc, 1/4 hp, 125/250V ac.
l Code L245, 1A resistive, 0.5A inductive, 30V dc.
l Television Type SM with prefixes and suffixes, Code TV-2, 2A, 120V ac.
l Type 5SM, single, single throw or double throw with suffixes 1 to 1000, 5A, 250V ac; 5A, 30V
dc.
** Suitable for 2A, 600V ac rating when properly installed in Certified electrical equipment.
Note: The above switches are supplied only to manufacturers for assembly of Certified electrical
equipment.
l Switches, open type, spdt, Cat No BE, spst, Cat Nos WE and YE, two single pole, single or
double-throw, Cat Nos 6AS112, 6AS132 and 6AS143, 6AS230; max ratings, 480V ac max, 25A
max, 480V ac max, 2 hp max, 480V ac max, 750VA max (pilot duty), with suffixes -1 or -2,
100,000 cycles, Cat No 6AS216, ratings 20A - 125/250/480V ac, 10A, 125V ac (tungsten); 1 hp-
125V ac, 2 hp-250V ac; 1/2A, 125V dc; 1/4A, 250V dc.
l Type 6AS5, Code L96, 15A, 125, 250 or 480V ac, 1/8 hp, 125V ac, 1/4 hp, 250V ac, 1/2A, 125V
dc, 1/4A, 250V dc.
l Type SX, single-pole, with prefixes and suffixes, with or without "T".
... 12/3/2002
Page 6 of 6

l Cat Nos BA-2R273-A2 and BA-5R276-A2, open type, rated A600, R300.
l S-use, Series BF (with suffixes), rating code L142-0.1A, 125V ac; Code L156- 11A, 1/3Hp, 125-
250-277V ac; 0.5A, 125V dc, 0.25A, 250V ac; 4A, 125V ac "L"; Code L162-5A, 125-250-277V
ac, 1/10Hp, 250V ac.
l Type 10BS with suffixes, Code L17, 20A, 125, 250 or 480V ac, 3/4 hp, 125V ac, 1 1/2 hp, 250V
ac.
l Type 12BS with suffixes, Code L111, 15A, 125-277V ac, 1/8 hp, 125V, 1/4 hp, 250V ac.
l Type 13BS with suffixes, Code 23, 20A, 125, 250 or 480V ac; 10A, 125V ac "L"; 1 hp, 125V ac;
2 hp, 250V ac; 1/2A, 125V dc; 1/4A, 250V dc and Code L104, 22A, 125, 250 or 480V ac; 3/4 hp,
125V ac; 1 1/2 hp, 250V ac.
l Type 8AC29-UL, Code L151, 5A, 250V ac; 5A, 30V dc.
Notes:
1. For Cat No BE, suffix letters and numbers are added to the catalogue designation to denote the
contact break distance type of actuator are wire terminals, etc.
2. These switches are Certified for use only as components in other equipment where the
acceptability of the combination has been determined by the Canadian Standards Association.
3. Series 713 ribbon chrome labels can be used for markings.
/ns
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE

INDUSTRIAL CONTROL
Manual - Certified to US Standards
Freeport, IL, 61032
l Switches, Type WW, open types, 1-, 2- or 3-pole, single throw contacts. Rating Symbols: 1-pole:
A, E; 2-pole: A, C, D, E, F, G; 3-pole: C, D, E and H. Maximum Ratings:
l A 16A, 1/2 hp - 125/250V ac; 3A"L" 125V ac; 150VA pilot duty - 125/250V ac; 24V dc, 2A.
l B (1 pole) 16A (inductive) at 125/250V ac; 3/4 hp at 125/250V ac, 150VA pilot duty at 125/250V
ac, 3A"L", 125V ac.
l C 15A, 1/2 hp - 125V ac; 10A, 1/2 hp - 250V ac; 3A"L" - 125V ac; 150VA pilot duty - 125/250V
ac.
l D 15A, 1/2 hp - 125V ac; 10A, 1/2 hp - 250V ac; 3A"L" - 125V ac; 150VA pilot duty - 125/250V
ac; 0.1A - 125V ac/dc; 24V dc, 2A.
l E 0.1A - 125V ac/dc.
l F 16A, 1/2 hp - 125/250V ac; 3A"L" - 125V ac; 150VA pilot duty - 125/250V ac; 0.1A - 125V
ac/dc.
l G 5A, 125V ac; 24V dc, 2A.
l H 5A (inductive), 125V ac; 2A, 24V dc; 0.1A, 125V ac/dc.
Notes:
1. Suffix letters and/or numbers are added to type designation to indicate type of contact, circuitry,
mechanical variation, electrical ratings and terminal size.
2. For Type WW controllers, all ampere ratings have been tested to 100,000 operations endurance.
3. Open type switches are Certified as components for use only in other Certified equipment, where
the suitability of the combination is to be determined by the Canadian Standards Association.
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE

SWITCHES-Snap - Special Use -
11 West Spring St
Freeport, IL, 61032
THE FOLLOWING COMPLY WITH ANSI/UL STD 1054:
l Cat No BE-2R2423-P5 rated 30A, 125, 250 or 277V ac. Res: 25A, 125, 250 or 480V ac; 1 hp,
125V ac; 2 hp, 250 or 480V ac; pilot duty 750VA, 480V ac max; 30A res, 277V ac, 71C (30,000
ops).
... 12/3/2002
Page 1 of 1
CUSTOMER CLASS FILE
Bifold Fluid Power Limited 3228-01 215681

Greengate Industrial Park, Greenside
VALVES-For Hazardous Locations
Way
Manchester
MS4 1SW
United Kingdom Refer to Class Description for program details
l Gas Safety Control (pilot) Valve, rated up to 16BAR (232psig), -55ºC to +90ºC, typical control fluid is air or gases
Model FP10P- aa -04-32-bb-c-XXX-YYY-zzz;
Where: (Valve Body)

"aa" can be "S1" = rated 0 to 10bar or "S2" = rated 0 to 16bar, solenoid operator
04 = ¼" NPT body port
32 = three way, two position
"bb" can be, "NC" = normally closed, "NO" = normally open, "DV" = diverter valve, or "SV" = selector valve
"c" indicates, O-ring material and can be, "V" = Flourocarbon rubber or "A" = Silicon and/or Flourosilicone rubber
and Where: (Actuator) (see CSA Report 1398692)
"XXX" = indicates solenoid operator voltage, "24"Vdc, "50"Vdc, "110"Vac, "120"Vac, "220"Vac, or "240"Vac
"YYY" = indicates solenoid operator wattage where, -"87A "= 6.5W , -"87B" = 5.7W
zzz = options
Notes for Model FP10P Valve:
1. Type FP10P valve body is evaluated for use with ‘Bifold Fluid Power Ltd.’ solenoid operator, FP Series, (refer to
CSA Report 1398692).
2. Suitability of mating the valve body with other CSA Certified, UL Listed operators is to be evaluated by CSA
International.
3. Not evaluated for fuel service.
http://directories.csa-international.org/xml_transform.asp?xml=certxml\215681-3228-01.xml&xsl=xsl/certre... 3/4/2008
Page 1 of 1
CUSTOMER CLASS FILE
Bifold Fluid Power Limited 3228-81 215681

Greengate Industrial Park, Greenside VALVES-For Hazardous Locations -
Way Certified to US Standards
Manchester
MS4 1SW
United Kingdom Refer to Class Description for program details
Gas Safety Control (pilot) Valve, rated up to 16BAR (232psig), -55ºC to +90ºC, typical control fluid is air or gases
Model FP10P- aa -04-32-bb-c-XXX-YYY-zzz;
Where: (Valve Body)

"aa" can be "S1" = rated 0 to 10bar or "S2" = rated 0 to 16bar, solenoid operator
04 = ¼" NPT body port
32 = three way, two position
"bb" can be, "NC" = normally closed, "NO" = normally open, "DV" = diverter valve, or "SV" = selector valve
"c" indicates, O-ring material and can be, "V" = Flourocarbon rubber or "A" = Silicon and/or Flourosilicone rubber
and Where: (Actuator) (see CSA Report 1398692)
"XXX" = indicates solenoid operator voltage, "24"Vdc, "50"Vdc, "110"Vac, "120"Vac, "220"Vac, or "240"Vac
"YYY" = indicates solenoid operator wattage where, -"87A "= 6.5W , -"87B" = 5.7W
zzz = options
Notes for Model FP10P Valve:
1. Type FP10P valve body is evaluated for use with ‘Bifold Fluid Power Ltd.’ solenoid operator, FP Series, (refer to
CSA Report 1398692).
2. Suitability of mating the valve body with other CSA Certified, UL Listed operators is to be evaluated by CSA
International.
3. Not evaluated for fuel service.
http://directories.csa-international.org/xml_transform.asp?xml=certxml\215681-3228-81.xml&xsl=xsl/certre... 3/4/2008
Page 1 of 2
CUSTOMER CLASS FILE

3215-30 166382
Bradley
SUPPLEMENTARY PROTECTORS-
1201 South Second St, COMPONENT ACCEPTANCE
PROGRAM
Milwaukee
WI
53204
Appliance circuit protectors, open types, trip-free, thermally operated, manually reset, with or without manual switching
feature:
Bulletin 1492-CB or -CD or ACB, rated as follows:
No Poles Rating
1 0.5-50A, 277V ac, 180V dc
2 0.5-50A, 480V ac, 360V dc
3 0.5-50A, 480V ac, 360V dc
4 0.5-50A, 480V/277V ac
Notes:
1. These devices are Certified as components for use only in other Certified equipment where the suitability of the
combination is to be determined by CSA International.
2. The circuit protectors were short circuit tested without series fuses at 5,000A, 277V ac, 1-ph; 5,000A, 480V ac, 3-
ph and 10,000A, 240V dc. Circuit protectors with short circuit ratings other than these are suitable for use in
circuits where they are protected by fuses rated not more than four times the full load current of the devices, except
the minimum fuse may be 15A.
3. Trip ratings are 125 percent of the full load current. The circuit protectors may be used to control motors having
full load motor currents not exceeding the main contact full load ratings.
4. The type designation is completed with letters and numbers indicating number of poles, tripping characteristics,
ampere rating, etc.
5. These devices have application codes as follows:
No. of Volts Amperes Tripping Current Overload Short
Poles Circuit
1 125V ac 0.5 - 50A TC1 OL0 U2, 10kA
1 277V ac 0.5 - 50A TC1 OL0 U2, 3kA
2, 3 240V ac 0.5 - 50A TC1 OL0 U2, 5kA
2, 3 480V ac 0.5 - 50A TC1 OL0 U2, 3kA
1, 2, 3, 4 65V dc (ac version) 0.5 - 50A TC1 OL0 U1, 2kA
1 120V dc 0.5 - 40A TC1 OL0 U1, 10kA
2 240V dc 0.5 - 40A TC1 OL0 U1, 10kA
http://directories.csa-international.org/xml_transform.asp?xml=certxml\166382-3215-30.xml&xsl=xsl/certr... 3/21/2008
Page 2 of 2
3 360V dc 0.5 - 40A TC1 OL0 U1, 10kA
1, 2 180V dc/360V dc 0.5 - 50A TC1 OL0 U1, 2kA
1 277V ac 0.5 - 50A TC1 OL0 U1, 5kA
2, 3 480V ac 0.5 - 50A TC1 OL0 U1, 5kA
1 240V ac 0.5 - 40A TC1 OL0 C1, 10kA
3 480V ac 0.5 - 40A TC1 OL0 C1, 10kA
6. These devices meet the "General Industrial" spacing requirements.
/ka
http://directories.csa-international.org/xml_transform.asp?xml=certxml\166382-3215-30.xml&xsl=xsl/certr... 3/21/2008
Page 1 of 5
CUSTOMER CLASS FILE
Siemens Milltronics Process Instruments

2258-02 113425_0_000
Inc.
PROCESS CONTROL EQUIPMENT-
1954 Technology Dr,
For Hazardous Locations
Peterborough
ON
K9J 7B1
Canada Refer to Class Description for program details
Class I, Division 2, Groups A, B, C and D; Class II & III, Division 1, Groups E, F and G, T4; Amb. -40°C to +85°C:
POINTEK Model CLS100 Series Capacitance Level Switch, Model Numbers CLS100 - abc-d; rated 10 - 33 Vdc,
4 to 20 mA, intrinsically safe with intrinsically safe probe when connected in accordance with Pointek Control
Drawing A10174R0.
Notes:
1. The above model numbers include suffixes designating indicator type, output signal, electrical connection, and
options.
2. The suitability of the final installation is to be determined by the local authorities having jurisdiction.
Class I, Groups A, B, C and D; Class II, Groups E, F and G; Class III; T4; Encl Type 4:
POINTEK CLS200 Series Capacitance Level Switches, Model Numbers CLS200 C2a-bcd-ef, rated 12 to 250
Vac/dc, 2 VA max; with intrinsically safe, Ex ia, probe for use in Hazardous Locations. Maximum working
pressure of 2517 kPa for rigid versions and 1034 kPa for cable versions.
Where:
a = version
b = process connection
c = approvals
d = options
e = extended length
f = units
Class I, Groups A, B, C and D T4; Encl Type 4; Max Amb. 85°C:
POINTEK CLS300 Series Capacitance Level Switch, Model Numbers CLS300 C3a-bcd-ef, rated 12 to 250
Vac/dc, 2 VA max; with intrinsically safe, Ex ia, probe for use in Hazardous Locations. Max working pressure of
3500 kPa for both the rigid version and for the cable version.
Series Capacitance Level Switches, POINTEK Model Numbers CLS300 C3a-bcd-ef, rated 12 to 250 Vac/dc, 2
VA max and Sitrans Model LC 300, rated 12-30 Vdc, 4-20 mA; with intrinsically safe, Ex ia, probe for use in
Hazardous Locations. Maximum working pressure of 3500 kPa for both rigid and cable versions.
Class II, Groups E, F and G; Class III; T4; Encl Type 4; Max Amb. 85°C:
POINTEK CLS300 Series Capacitance Level Switch, Model Numbers CLS300 C3a-bcd-ef, rated 12 to 250
Vac/dc, 2 VA max; with intrinsically safe, Ex ia, probe for use in Hazardous Locations. Max working pressure of
3500 kPa for both the rigid version and for the cable version.
file://C:\Temp\C1KL3EUB.htm 5/28/2008
Page 2 of 5
Where:
a = version
c = approvals
d = options
e = extended length
f = units
VA max and Sitrans Model LC 300, rated 12-30 Vdc, 4-20 mA; with intrinsically safe, Ex ia, probe for use in
Hazardous Locations. Maximum working pressure of 3500 kPa for both rigid and cable versions.
General Purpose - Ordinary Location; Encl Type 4; Max Amb. 85°C:
VA max and Sitrans Model LC 300, rated 12-30 Vdc, 4-20 mA; with probe for use Ordinary Locations. Max
working pressure of 3500 kPa for both rigid and cable versions.
Where:
a = version
c = approvals
d = options
e = extended length
f = units
Dust Ignition Proof Class II and III, Div.1, Groups E, F, G

Non Incendive Class I, II and III, Div. 2, Groups A, B, C, D, F, G
POINTEK Model CLS 500 Series Capacitive Level and Flow Through Transmitter,
Model Numbers 7ML560a-bcde-1fA0 and 7ML5604-bAcd-gehf, rated 12 - 32 V, 4 - 20 mA, with solid state
output switch, rated 30 Vdc or ac, 100 mA.
where a = version (1, 2 or 3)

b = transmitter type; 0 = none, 1 = 330 pF range
c = process connection size and type and/or pressure rating (2 digits)
d = probe insulation/material of process connection (1, 2, 3 or A)
e = approvals (2 or B)
f = thermal isolator; A = rigid thermal isolator, B = none
g = stilling well diameter (0, 1 or 2)
h = probe/electrode diameter (A or B)
SITRANS Model LC 500 Series Capacitive Level and Flow Through Transmitter, Model Numbers 7ML55a-bcd-
ef, rated 12 - 32 V, 4 - 20 mA, with solid state output switch, rated 30 Vdc or ac, 100 mA.
where a = version (13, 15, 17, 19 or 21)

b = probe version (2 digits)
d = approvals (B)
e = variations not safety relevant (3 digits)
f = transmitter type; 0 = none, 1 = 3300 pF range
Enclosure Type 4, Ambient temperature -40 °C ... +85 °C, Temperature Class T4
Maximum working pressure for both the compact versions and for the cable versions - refer to instruction manual.
Non Incendive Class I, II and III, Div. 2, Groups A, B, C, D, F, G
Page 3 of 5
POINTEK Model CLS 200 Series Capacitive Level Switch, Model No. 7ML5502-bbcde-0fgh-z and Model
No. 7ML550a-bbccd-efgh-z, with solid state output switch; input rated 30 Vdc; solid state output switch rated
33 V dc or ac, 100 mA..
- POINTEK Model CLS 300 Series Capacitive Level Switch, Model No. 7ML55aa-bbcde-fgAh-z and Model
No. 7MLaa-bbccd-egfh-z, with solid state output switch; input rated 30 Vdc; solid state output switch rated
33 V dc or ac, 100 mA..
SITRANS LC 300 Series Capacitive Level Transmitter, Model No. 7ML56aa-bcdde-fgA0, with solid state output switch;
input rated 30 Vdc; solid state output switch rated 33 V dc or ac, 100 mA..
Enclosure Type 4, Ambient temperature -40 °C ... +85 °C, Temperature Class T4 or T6
MODEL CODE LISTING
For POINTEK CLS 200:
a = Product code 4 or 5
bb = Version 0X, 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1K, 1L, 2A, 2B, 2C, 2D, 2E, 2F, 2G, 2H, 3A,
3B, 3C, 3D, 3E, 3F or 3G
c = Process Connection Size A, B, C, D, E, F, G, H, J, K, R, S, T, V or W
cc = Process Connection, Size and Rating A1, A2, A3, B1, B2, B3, C1, C2, C3, D1, D2, D3, E1,
E2, E3, J4, J6, K4, K6, L4, L6, M4, M6, N4 or N6
d = Approvals 2 or 3
e = Enclosure 1 or 2
f = Additional options A, B, C, D, E, F, G or H
g = WHG approved or not A or B
h = Output digital, Profibus 1
z = Additional information (not in code): Y15, A01, A02, A03, A04, A22, C12, A05 or A06.
For POINTEK CLS 300:
aa = Product Code 06, 07, 08 or 10
bb = Version 0X, 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D, 2E, 2F, 2G, 3A, 3B, 3C, 3D, 3E, 3F or 3G
c = Process Connection Size A, B, C, D, E, F, G, H, J, or K
cc = Process Connection A1, A2, A3, B1, B2, B3, C1, C2, C3, D1, D2, D3, E1, E2, E3, J4, J6, K4,
K6, L4, L6, M4, M6, N4, N6
d = Approvals 2 or 3
Page 4 of 5
e = WHG approval 0 or 1
f = Enclosure A, B, C, D, 0, 1, 2 or 3
g = Options A or B
h = Output digital, Profibus 1
z = Additional information (not in code): Y01, Y15, A01, A02, A03, A04, A22, C12, A05 or A06.
For SITRANS LC 300:
aa = Threaded or Welded 25 or 26
b = Electronic Transmitter, digital, Profibus 2
c = Version A, B, C, D, E, F, G, or H
dd = Process Connection A0, B0, C0, D0, E0, F0, G0, H0, J0, K0, A1, A2, A3, B1, B2, B3, C1, C2, C3, D1,
D2, D3, E1, E2, E3, J4, J6, K4, K6, L4, L6, M4, M6, N4 or N6
e = Approvals 2 or 3
f = Thermal Isolator 0 or 1
g = Enclosure A, B, C, D
z = Additional information (not in code): Y01, Y15, A01, A02, A03, A04, A22, C12, A05 or A06.
Class I, Division 1, Explosion proof, Group A,B,C,D, Type 4, Tamb -40 °C to +70 °C, T4
Capacitance Level and Flow Measurement System, SITRANS LC500 and POINTEK CLS500 Series; rated 12-
30Vdc, 2 VA maximum; with Intrinsicaly Safe, Ex ia probe
- POINTEK Model CLS 500 Series Capacitive Level and Flow Through Transmitter,
Model Numbers 7ML560a-bcde-l fAO and 7ML5604-bAcd-gehf, rated 12 - 32 V, 4 - 20 mA, with solid state
output switch, rated 30 Vdc or ac, 100 mA.
Where a = version (1, 2 or 3)

b = transmitter type; 0 = none, I = 330 pF range
d = probe insulation/material of process connection (l, 2, 3 or A)
e = approvals (2 or B)
f = thermal isolator; A = rigid thermal isolator, B = none
g = stilling well diameter (0, I or 2)
h = probe/electrode diameter (A or B)
- SITRANS Model LC 500 Series Capacitive Level and Flow Through Transmitter,
Model Numbers 7ML55a-bcd-ef, rated 12 - 32 V, 4 - 20 mA, with solid state output switch, rated 30 Vdc or
ac,100mA.
Where a = version (13, 15, 17, 19 or 21)

b = probe version (2 digits)
Page 5 of 5
d =approvals (B)
e = variations not safety relevant (3 digits)
f= transmitter type; 0 =none, I = 3300 pF range
Enclosure Type 4, Ambient temperature -40°C ... +85 °C, Temperature Class T4
/gp
Page 1 of 15
CUSTOMER CLASS FILE

2258-02 069960_C_000
Bradley
PROCESS CONTROL EQUIPMENT-
1 Allen-Bradley Dr,
Mayfield Heights
OH
44124
Class I, Div. 2, Groups A, B, C and D:
CATEGORIES:
Programmable Controllers
Input/Output Modules
Communications Modules
Scanners - Memory Modules
Chassis Assemblies
Processors
Power Supplies
Programmers Industrial Work Stations
Notes:
1. These units are for use in programmable controller systems in conditions up to a 60C max ambient. A 120V ac
nominal input power is suitable for a range of 97 to 132V ac. A 220 or 240V ac nominal input power is suitable for
a range of 195 to 264V ac.
2. The units are Certified as components for use only in other Certified equipment where the suitability of the
combination is to be determined by CSA International.
3. The Catalogue numbers may be expressed in the format of "Catalogue Number" space "Letter" or "Catalogue
Number" series "Letter" or "Catalogue Number"/"Letter " or "Catalogue Number" or "Letter"; where the "Letter"
is the series designation if not specified, then the series is "A".
4. The Catalogue numbers may be followed by a "K" which indicates the unit has a conformal coating.
5. Khrones catalogue numbers may or may not be proceeded by the letter "K".
6. The prefix "TK" may be used in place of "TC" indicating that the unit has conformal coating.
7. All products evaluated to CSA C22.2 No. 213.
CATALOG NUMBER SERIES STANDARD Comments

1746-BTM B CSA C22.2 No. 142
1746-INT4 A CSA C22.2 No. 142
1746-INT4 B CSA C22.2 No. 142
1746-P4 A CSA C22.2 No. 1010-92
1747-KFC15 A CSA C22.2 No. 142
1747-SDN B CSA C22.2 No. 142
1751-SL4SP A CSA C22.2 No. 142
1751-SLBA A CSA C22.2 No. 142
http://directories.csa-international.org/xml_transform.asp?xml=certxml\069960_C_000-2258-02.xml&xsl=x... 5/9/2008
Page 2 of 15
1751-SLBP A CSA C22.2 No. 142
1756-A10 B CSA C22.2 No. 142
1756-A13 B CSA C22.2 No. 142
1756-A17 B CSA C22.2 No. 142
1756-A4 B CSA C22.2 No. 142
1756-A7 B CSA C22.2 No. 142
1756-BATM A CSA C22.2 No. 1010-92
1756-CFM A CSA C22.2 No. 142
1756-CFM A CSA C22.2 No. 1010-92 After 2007-08
1756-CN2 A CSA C22.2 No. 1010-92
1756-CN2 B CSA C22.2 No. 1010-92
1756-CN2R A CSA C22.2 No. 1010-92
1756-CN2R B CSA C22.2 No. 1010-92
1756-CNB D CSA C22.2 No. 142
1756-CNB E CSA C22.2 No. 1010-92
1756-CNBR B CSA C22.2 No. 142
1756-CNBR D CSA C22.2 No. 142
1756-CNBR E CSA C22.2 No. 1010-92
1756-DHRIO D CSA C22.2 No 1010-92
1756-DMA30 A CSA C22.2 No. 142
1756-DMA31 A CSA C22.2 No. 142
1756-DMA50 A CSA C22.2 No. 142
1756-DMB30 A CSA C22.2 No. 142
1756-DMD30 A CSA C22.2 No. 142
1756-DMF30 A CSA C22.2 No. 142
1756-DNB A CSA C22.2 No. 142
1756-DNB B CSA C22.2 No. 1010-92
1756-DNB C CSA C22.2 No. 1010-92
1756-EN2F A CSA C22.2 No 1010-92
1756-EN2T A CSA C22.2 No 1010-92
1756-ENBT A CSA C22.2 No. 1010-92
1756-EWEB A CSA C22.2 No. 1010-92
1756-EWEB B CSA C22.2 No 1010-92
1756-HSC A CSA C22.2 No. 142
1756-IA16 A CSA C22.2 No. 142
1756-IA16I A CSA C22.2 No. 142
1756-IA32 A CSA C22.2 No. 142
1756-IA8D A CSA C22.2 No. 142
1756-IB16 A CSA C22.2 No. 142
1756-IB16D A CSA C22.2 No. 142
1756-IB16I A CSA C22.2 No. 142
1756-IB16ISOE A CSA C22.2 No. 1010-92
1756-IB32 B CSA C22.2 No. 1010-92
1756-IC16 A CSA C22.2 No. 142
1756-IF16 A CSA C22.2 No. 1010-92
1756-IF4FXOF2F A CSA C22.2 No. 1010-92
Page 3 of 15
1756-IF4FXOF2F B CSA C22.2 No 1010-92
1756-IF6CIS A CSA C22.2 No. 1010-92
1756-IF6I A CSA C22.2 No. 142
1756-IF8 A CSA C22.2 No. 142
1756-IF8 A CSA C22.2 No. 142
1756-IG16 A CSA C22.2 No. 1010-92
1756-IH16I A CSA C22.2 No. 142
1756-IH16ISOE A CSA C22.2 No. 142
1756-IM16I A CSA C22.2 No. 142
1756-IN16 A CSA C22.2 No. 142
1756-IR6I A CSA C22.2 No. 142
1756-IT6I A CSA C22.2 No. 142
1756-IT6I2 A CSA C22.2 No. 1010-92
1756-IV16 A CSA C22.2 No. 1010-92
1756-IV32 A CSA C22.2 No. 1010-92
1756-L1 A CSA C22.2 No. 142
1756-L1M1 A CSA C22.2 No. 142
1756-L1M2 A CSA C22.2 No. 142
1756-L1M3 A CSA C22.2 No. 142
1756-L53 A CSA C22.2 No. 142
1756-L55 A CSA C22.2 No. 142
1756-L60M03SE A CSA C22.2 No. 1010-92
1756-L61 A CSA C22.2 No. 1010-92
1756-L61 B CSA C22.2 No. 1010-92
1756-L61S B CSA C22.2 No. 1010-92
1756-L62 A CSA C22.2 No. 1010-92
1756-L62 B CSA C22.2 No. 1010-92
1756-L62S B CSA C22.2 No. 1010-92
1756-L63 A CSA C22.2 No. 1010-92
1756-L63 B CSA C22.2 No. 1010-92
1756-L63S B CSA C22.2 No 1010-92
1756-L64 B CSA C22.2 No 1010-92
1756-L65 B CSA C22.2 No 1010-92
1756-LSP B CSA C22.2 No. 1010-92
1756-M02AE A CSA C22.2 No. 142
1756-M1 A CSA C22.2 No. 142
1756-M12 A CSA C22.2 No. 142
1756-M13 A CSA C22.2 No. 142
1756-M14 A CSA C22.2 No. 142
1756-M16 A CSA C22.2 No. 142
1756-M2 A CSA C22.2 No. 142
1756-M22 A CSA C22.2 No. 142
1756-M23 A CSA C22.2 No. 142
1756-M24 A CSA C22.2 No. 142
1756-M3 A CSA C22.2 No. 142
1756-OA16 A CSA C22.2 No. 1010-92
Page 4 of 15
1756-OA16I A CSA C22.2 No. 142
1756-OA8 A CSA C22.2 No. 142
1756-OA8D A CSA C22.2 No. 142
1756-OA8E A CSA C22.2 No. 142
1756-OB16D A CSA C22.2 No. 142
1756-OB16E A CSA C22.2 No. 1010-92
1756-OB16I A CSA C22.2 No. 142
1756-OB16IS A CSA C22.2 No. 142
1756-OB32 A CSA C22.2 No. 142
1756-OB32 A CSA C22.2 No. 142
1756-OB8 A CSA C22.2 No. 142
1756-OB8EI A CSA C22.2 No. 142
1756-OB8I A CSA C22.2 No. 1010-92
1756-OC8 A CSA C22.2 No. 142
1756-OF4 A CSA C22.2 No. 1010-92 After 2007-08
1756-OF6CI A CSA C22.2 No. 142
1756-OF6VI A CSA C22.2 No. 142
1756-OF8 A CSA C22.2 No. 1010-92 After 2007-08
1756-OG16 A CSA C22.2 No. 1010-92
1756-OH8I A CSA C22.2 No. 142
1756-ON8 A CSA C22.2 No. 142
1756-OV16E A CSA C22.2 No. 1010-92
1756-OV32E A CSA C22.2 No. 1010-92
1756-OW16I A CSA C22.2 No. 142
1756-OX8I A CSA C22.2 No. 142
1756-PA72 C CSA C22.2 No. 1010-92
1756-PA75 B CSA C22.2 No. 1010-92
1756-PA75R A CSA C22.2 No. 1010-92
1756-PB72 C CSA C22.2 No. 1010-92
1756-PB75 A CSA C22.2 No. 142
1756-PB75 B CSA C22.2 No. 1010-92
1756-PB75R A CSA C22.2 No. 1010-92
1756-PC75 B CSA C22.2 No. 1010-92
1756-PH75 B CSA C22.2 No. 1010-92
1756-PLS B CSA C22.2 No. 142
1756-PSCA2 A CSA C22.2 No. 1010-92
1756-REG A CSA C22.2 No. 1010-92
1756-SYNCH A CSA C22.2 No. 142
1757-SRM B CSA C22.2 No. 1010-92
1771-A1B B CSA C22.2 No. 142
1771-A2B B CSA C22.2 No. 142
1771-A3B B CSA C22.2 No. 142
1771-A3B1 B CSA C22.2 No. 142
1771-A4B B CSA C22.2 No. 142
1771-ACN A CSA C22.2 No. 142
Page 5 of 15
1771-ACN B CSA C22.2 No. 142
1771-ACN15 B CSA C22.2 No. 142
1771-ACNR A CSA C22.2 No. 142
1771-ACNR B CSA C22.2 No. 142
1771-ACNR15 B CSA C22.2 No. 142
1771-AF A CSA C22.2 No. 142
1771-AF1 A CSA C22.2 No. 142
1771-ALX A CSA C22.2 No. 142
1771-ASB C CSA C22.2 No. 142
1771-ASB D CSA C22.2 No. 142
1771-ASB E CSA C22.2 No. 142
1771-ASB E CSA C22.2 No. 142
1771-CFM A CSA C22.2 No. 142
1771-CFM B CSA C22.2 No. 142
1771-CFM C CSA C22.2 No. 142
1771-DA A CSA C22.2 No. 142
1771-DMC A CSA C22.2 No. 142
1771-DMC1 A CSA C22.2 No. 142
1771-DMC4 A CSA C22.2 No. 142
1771-DRS A CSA C22.2 No. 142
1771-DRS1 A CSA C22.2 No. 142
1771-DRS4 A CSA C22.2 No. 142
1771-DTC A CSA C22.2 No. 142
1771-DXPS A CSA C22.2 No. 142
1771-IA A CSA C22.2 No. 142
1771-IA B CSA C22.2 No. 142
1771-IA C CSA C22.2 No. 142
1771-IAD D CSA C22.2 No. 142
1771-IB A CSA C22.2 No. 142
1771-IBD B CSA C22.2 No. 142
1771-IBN A CSA C22.2 No. 142
1771-IBN A CSA C22.2 No. 142
1771-IBN B CSA C22.2 No. 142
1771-IBN C CSA C22.2 No. 142
1771-IBN C CSA C22.2 No. 142
1771-ICD B CSA C22.2 No. 142
1771-ID16 A CSA C22.2 No. 142
1771-ID16 B CSA C22.2 No. 142
1771-ID16GM A CSA C22.2 No. 142
1771-ID16GM B CSA C22.2 No. 142
1771-IFE A CSA C22.2 No. 142
1771-IFE B CSA C22.2 No. 142
1771-IFE C CSA C22.2 No. 142
1771-IFF A CSA C22.2 No. 142
1771-IL D CSA C22.2 No. 142
1771-IQ16 A CSA C22.2 No. 142
Page 6 of 15
1771-IQ16 B CSA C22.2 No. 142
1771-IQ16 C CSA C22.2 No. 142
1771-IR D CSA C22.2 No. 142
1771-IXE D CSA C22.2 No. 142
1771-IXHR C CSA C22.2 No. 142
1771-KRF A CSA C22.2 No. 142
1771-KRF B CSA C22.2 No. 142
1771-LI A CSA C22.2 No. 142
1771-LIA A CSA C22.2 No. 142
1771-LIA2 A CSA C22.2 No. 142
1771N-0LLLLLRRR C CSA C22.2 No. 142
1771N-0LLLLRRRR C CSA C22.2 No. 142
1771N-0LLLTTTTT C CSA C22.2 No. 142
1771N-0LLRRRRRR C CSA C22.2 No. 142
1771N-0LLRRTTTT C CSA C22.2 No. 142
1771N-0LLTTTTTT C CSA C22.2 No. 142
1771N-0NNRRTTVV C CSA C22.2 No. 142
1771N-0NNTTTTTT C CSA C22.2 No. 142
1771N-0PPPPPPVV C CSA C22.2 No. 142
1771N-0PPPPPTTT C CSA C22.2 No. 142
1771N-1FNNNNNNN C CSA C22.2 No. 142
1771N-2BDRRRRRT C CSA C22.2 No. 142
1771N-2DDLLLTTT C CSA C22.2 No. 142
1771N-2DDLLTTTT C CSA C22.2 No. 142
1771N-2DDPPRRRR C CSA C22.2 No. 142
1771N-2DFLNPRTV C CSA C22.2 No. 142
1771N-3FFFNNNNN C CSA C22.2 No. 142
1771N-3FFFNNNTT C CSA C22.2 No. 142
1771N-4BDBDRRRT C CSA C22.2 No. 142
1771N-4BDBDRRTT C CSA C22.2 No. 142
1771N-4DDDDLLLL C CSA C22.2 No. 142
1771N-4DDDDNNNN C CSA C22.2 No. 142
1771N-4DDDDRRTT C CSA C22.2 No. 142
1771N-4DDDFNNNN C CSA C22.2 No. 142
1771N-4DDFFLNRV C CSA C22.2 No. 142
1771N-4DDFFLPRT C CSA C22.2 No. 142
1771N-4DDFFNNPP C CSA C22.2 No. 142
1771N-4FFFFNNNN C CSA C22.2 No. 142
1771N-5BDBDDRRT C CSA C22.2 No. 142
1771N-6FFFFFFNN C CSA C22.2 No. 142
1771-NB4S C CSA C22.2 No. 142
1771-NB4T C CSA C22.2 No. 142
1771-NBRC C CSA C22.2 No. 142
1771-NBSC C CSA C22.2 No. 142
1771-NBTC C CSA C22.2 No. 142
1771-NBV1 C CSA C22.2 No. 142
Page 7 of 15
1771-NBVC C CSA C22.2 No. 142
1771-NIS C CSA C22.2 No. 142
1771-NIV C CSA C22.2 No. 142
1771-NIV1 C CSA C22.2 No. 142
1771-NIVR C CSA C22.2 No. 142
1771-NIVT C CSA C22.2 No. 142
1771-NOC C CSA C22.2 No. 142
1771-NOV C CSA C22.2 No. 142
1771-NR C CSA C22.2 No. 142
1771-NT1 C CSA C22.2 No. 142
1771-NT2 C CSA C22.2 No. 142
1771N-XXXXXXXXX A CSA C22.2 No. 142 "X’ may be any letter A-Z or number 0-9
1771N-XXXXXXXXX B CSA C22.2 No. 142 "X’ may be any letter A-Z or number 0-9
1771N-XXXXXXXXX C CSA C22.2 No. 142 "X’ may be any letter A-Z or number 0-9
1771-OAD B CSA C22.2 No. 142
1771-OAD C CSA C22.2 No. 142
1771-OBD A CSA C22.2 No. 142
1771-OBD C CSA C22.2 No. 142
1771-OBDS B CSA C22.2 No. 142
1771-OBN A CSA C22.2 No. 142
1771-OBN B CSA C22.2 No. 142
1771-OBN B CSA C22.2 No. 142
1771-OD16 A CSA C22.2 No. 142
1771-OD16 B CSA C22.2 No. 142
1771-ODD B CSA C22.2 No. 142
1771-OFE1 B CSA C22.2 No. 142
1771-OFE2 B CSA C22.2 No. 142
1771-OFE3 B CSA C22.2 No. 142
1771-OQ16 B CSA C22.2 No. 142
1771-OQ16 C CSA C22.2 No. 142
1771-OVN B CSA C22.2 No. 142
1771-OW A CSA C22.2 No. 142
1771-OW16 B CSA C22.2 No. 142
1771-P4 A CSA C22.2 No. 142
1771-P5 A CSA C22.2 No. 1010-92
1771-P5E B CSA C22.2 No. 1010-92
1771-P7 D CSA C22.2 No. 142
1771-PSC A CSA C22.2 No. 142
1771-SDN A CSA C22.2 No. 142
1771-SDN B CSA C22.2 No. 142
1771-SN A CSA C22.2 No. 142
1771-SN B CSA C22.2 No. 142
1771-TCM D CSA C22.2 No. 142
1771-TCMR B CSA C22.2 No. 142
1771-VHSC B CSA C22.2 No. 142
1772-ME A CSA C22.2 No. 142
Page 8 of 15
1772-ME16 A CSA C22.2 No. 142
1772-ME8 A CSA C22.2 No. 142
1772-SD A CSA C22.2 No. 142
1772-SD2 A CSA C22.2 No. 142
1784-CPCIDS A CSA C22.2 No. 142
1784-KTCS B CSA C22.2 No. 142
1784-KTCX15 A CSA C22.2 No. 142
1784-KTCX15 B CSA C22.2 No. 142
1784-PCIC A CSA C22.2 No. 142
1784-PCIC B CSA C22.2 No. 1010-92
1784-PCICS A CSA C22.2 No. 142
1784-PCICS B CSA C22.2 No. 1010-92
1784-PCID A CSA C22.2 No. 142
1784-PCIDS A CSA C22.2 No. 142
1784-PCIDS B CSA C22.2 No. 1010-92
1784-PKTCS B CSA C22.2 No. 1010-92
1785-BCM A CSA C22.2 No. 142
1785-BCM B CSA C22.2 No. 142
1785-BCM C CSA C22.2 No. 142
1785-BEM A CSA C22.2 No. 142
1785-BEM B CSA C22.2 No. 142
1785-CHBM A CSA C22.2 No. 142
1785-ENET B CSA C22.2 No. 142
1785-ENET C CSA C22.2 No. 142
1785-KE B CSA C22.2 No. 142
1785-KE C CSA C22.2 No. 142
1785-L11B E CSA C22.2 No. 142
1785-L20B E CSA C22.2 No. 142
1785-L20C E CSA C22.2 No. 142
1785-L20C15 F CSA C22.2 No. 142
1785-L20E E CSA C22.2 No. 142
1785-L20E F CSA C22.2 No. 142
1785-L26B E CSA C22.2 No. 142
1785-L30B E CSA C22.2 No. 142
1785-L40B E CSA C22.2 No. 142
1785-L40C E CSA C22.2 No. 142
1785-L40C15 F CSA C22.2 No. 142
1785-L40E E CSA C22.2 No. 142
1785-L40E F CSA C22.2 No. 142
1785-L40L E CSA C22.2 No. 142
1785-L46B E CSA C22.2 No. 142
1785-L46C15 F CSA C22.2 No. 142
1785-L60B E CSA C22.2 No. 142
1785-L60L E CSA C22.2 No. 142
1785-L66B C CSA C22.2 No. 142
1785-L66L C CSA C22.2 No. 142
Page 9 of 15
1785-L80B E CSA C22.2 No. 142
1785-L80C E CSA C22.2 No. 142
1785-L80C15 F CSA C22.2 No. 142
1785-L80E E CSA C22.2 No. 142
1785-L80E F CSA C22.2 No. 142
1785-L86B E CSA C22.2 No. 142
1785-LT B CSA C22.2 No. 142
1785-LT2 A CSA C22.2 No. 142
1785-LT3 A CSA C22.2 No. 142
1785-LT4 A CSA C22.2 No. 142
1785-M100 A CSA C22.2 No. 142
1785-ME16 A CSA C22.2 No. 142
1785-ME32 A CSA C22.2 No. 142
1785-ME64 A CSA C22.2 No. 142
1785-MJ A CSA C22.2 No. 142
1785-MR A CSA C22.2 No. 142
1785-MS A CSA C22.2 No. 142
1785-PFB A CSA C22.2 No. 142
1785-RC A CSA C22.2 No. 142
1786-RPA A CSA C22.2 No. 142
1786-RPA B CSA C22.2 No. 1010-92
1786-RPCD A CSA C22.2 No. 142
1786-RPFM A CSA C22.2 No. 142
1786-RPFS A CSA C22.2 No. 142
1788-CN2DN A CSA C22.2 No. 142
1788-CNC A CSA C22.2 No. 142
1788-CNCR A CSA C22.2 No. 142
1788-CNF A CSA C22.2 No. 142
1788-CNFR A CSA C22.2 No. 142
1791-0A16 B CSA C22.2 No. 142
1791-0A32 B CSA C22.2 No. 142
1791-0B16 B CSA C22.2 No. 142
1791-0B32 B CSA C22.2 No. 142
1791-16A0 B CSA C22.2 No. 142
1791-16AC B CSA C22.2 No. 142
1791-16B0 B CSA C22.2 No. 142
1791-16BC B CSA C22.2 No. 142
1791-24AR B CSA C22.2 No. 142
1791-24B8 B CSA C22.2 No. 142
1791-24BR B CSA C22.2 No. 142
1791-32A0 B CSA C22.2 No. 142
1791-32B0 B CSA C22.2 No. 142
1791-8AC B CSA C22.2 No. 142
1791-8AR B CSA C22.2 No. 142
1791-8BC B CSA C22.2 No. 142
1791-8BR B CSA C22.2 No. 142
Page 10 of 15
1791-IOBW A CSA C22.2 No. 142
1791-IOBX A CSA C22.2 No. 142
1791-IOVW A CSA C22.2 No. 142
1791-IOVX A CSA C22.2 No. 142
1791-N4C2 A CSA C22.2 No. 142
1791-N4V2 A CSA C22.2 No. 142
1791-NDC A CSA C22.2 No. 142
1791-NDV A CSA C22.2 No. 142
1792D-0B4D B CSA C22.2 No. 142
1792D-0B8D B CSA C22.2 No. 142
1792D-0VT16E B CSA C22.2 No. 142
1792D-12BVT4D B CSA C22.2 No. 142
1792D-16BVT0D B CSA C22.2 No. 142
1792D-2BV0D B CSA C22.2 No. 142
1792D-2BVA2D B CSA C22.2 No. 142
1792D-4BV0D B CSA C22.2 No. 142
1792D-4BVT4D B CSA C22.2 No. 142
1792D-8BIO8E B CSA C22.2 No. 142
1792D-8BV0D B CSA C22.2 No. 142
1792D-8BVT0D B CSA C22.2 No. 142
1792D-8BVT8D B CSA C22.2 No. 142
1792D-CB12 B CSA C22.2 No. 142
1792D-CB12JP B CSA C22.2 No. 142
1792D-CB18 B CSA C22.2 No. 142
1792D-CB18JP B CSA C22.2 No. 142
1792D-CB18P B CSA C22.2 No. 142
1792D-CB18PT B CSA C22.2 No. 142
1792D-CBFM B CSA C22.2 No. 142
1792-IB16A A CSA C22.2 No. 142
1792-IB16A B CSA C22.2 No. 142
1792-IB16S A CSA C22.2 No. 142
1792-IB16S B CSA C22.2 No. 142
1792-IB2XOB2EA A CSA C22.2 No. 142
1792-IB2XOB2EA B CSA C22.2 No. 142
1792-IB2XOB2ES A CSA C22.2 No. 142
1792-IB2XOB2ES B CSA C22.2 No. 142
1792-IB4A A CSA C22.2 No. 142
1792-IB4A B CSA C22.2 No. 142
1792-IB4S A CSA C22.2 No. 142
1792-IB4S B CSA C22.2 No. 142
1792-IB8A A CSA C22.2 No. 142
1792-IB8A B CSA C22.2 No. 142
1792-IB8S A CSA C22.2 No. 142
1792-IB8S B CSA C22.2 No. 142
1792-OB4EA A CSA C22.2 No. 142
1792-OB4EA B CSA C22.2 No. 142
Page 11 of 15
1792-OB4ES A CSA C22.2 No. 142
1792-OB4ES B CSA C22.2 No. 142
1794-ACN A CSA C22.2 No. 142
1794-ACN15 C CSA C22.2 No. 142
1794-ACNR A CSA C22.2 No. 142
1794-ACNR15 C CSA C22.2 No. 142
1794-ADN B CSA C22.2 No. 142
1794-ASB D CSA C22.2 No. 142
1794-ASB E CSA C22.2 No. 142
1794-ASB2 C CSA C22.2 No. 142
1794-ASB2 D CSA C22.2 No. 142
1794-ASBLT D CSA C22.2 No. 142
1794-FLA A CSA C22.2 No. 1010-92
1794-IA8 A CSA C22.2 No. 142
1794-IA8I A CSA C22.2 No. 142
1794-IB10XOB6 A CSA C22.2 No. 142
1794-IB16 A CSA C22.2 No. 142
1794-IB8 A CSA C22.2 No. 142
1794-IB8S A CSA C22.2 No. 142
1794-IE4XOE2 B CSA C22.2 No. 142
1794-IE8 B CSA C22.2 No. 142
1794-IF2XOF2I A CSA C22.2 No. 142
1794-IF4I A CSA C22.2 No. 142
1794-IJ2 A CSA C22.2 No. 142
1794-IR8 A CSA C22.2 No. 142
1794-IRT8 A CSA C22.2 No. 142
1794-IRT8 B CSA C22.2 No. 142
1794-IT8 A CSA C22.2 No. 142
1794-IV16 A CSA C22.2 No. 142
1794-L33 A CSA C22.2 No. 1010-92
1794-L34 B CSA C22.2 No. 1010-92
1794-OA8 A CSA C22.2 No. 142
1794-OA8I A CSA C22.2 No. 142
1794-OB16 A CSA C22.2 No. 142
1794-OB16P A CSA C22.2 No. 142
1794-OB8 A CSA C22.2 No. 142
1794-OB8EP A CSA C22.2 No. 142
1794-OE4 B CSA C22.2 No. 142
1794-OF4I A CSA C22.2 No. 142
1794-OV16 A CSA C22.2 No. 142
1794-OV16 A CSA C22.2 No. 142
1794-OV16P A CSA C22.2 No. 142
1794-OW8 A CSA C22.2 No. 142
1794-TB2 A CSA C22.2 No. 142
1794-TB3 A CSA C22.2 No. 142
1794-TB3G A CSA C22.2 No. 142
Page 12 of 15
1794-TB3GS A CSA C22.2 No. 142
1794-TB3S A CSA C22.2 No. 142
1794-TB3T A CSA C22.2 No. 142
1794-TB3TS A CSA C22.2 No. 142
1794-TBN A CSA C22.2 No. 142
1799D-0B4DAB A CSA C22.2 No. 142
1799D-0B4DAB B CSA C22.2 No. 142
1799D-0B8DAB A CSA C22.2 No. 142
1799D-0B8DAB B CSA C22.2 No. 142
1799D-0VT16EAB B CSA C22.2 No. 142
1799D-12BVT4DAB B CSA C22.2 No. 142
1799D-2BV0DAB A CSA C22.2 No. 142
1799D-2BV0DAB B CSA C22.2 No. 142
1799D-2BVA2DAB B CSA C22.2 No. 142
1799D-4BV0DAB B CSA C22.2 No. 142
96195833 NA CSA C22.2 No. 142
96196033 NA CSA C22.2 No. 142
96257434 NA CSA C22.2 No. 142
9900-16ADN A CSA C22.2 No. 142
9900-16IE4XOE2 B CSA C22.2 No. 142
9900-16OE4 A CSA C22.2 No. 142
9904-KTCX15 B CSA C22.2 No. 142
9904-PCIC A CSA C22.2 No. 142
9904-RPA A CSA C22.2 No. 142
9904-RPFM A CSA C22.2 No. 142
9904-RPFS A CSA C22.2 No. 142
D100-DTC A CSA C22.2 No. 142
K5745960021 D CSA C22.2 No. 142
K5745960021 E CSA C22.2 No. 142
K5745960022 A CSA C22.2 No. 142
K5745960027 A CSA C22.2 No. 142
K5745960028 A CSA C22.2 No. 142
K5745960032 B CSA C22.2 No. 142
K5745960033 B CSA C22.2 No. 142
K5745960048 A CSA C22.2 No. 142
K5745960051 A CSA C22.2 No. 142
K5745960053 A CSA C22.2 No. 142
K5745999582 C CSA C22.2 No. 142
K5745999622 B CSA C22.2 No. 142
K5745999626 B CSA C22.2 No. 142
P0-912DV A CSA C22.2 No. 142
P0-912DV C CSA C22.2 No. 142
Page 13 of 15
RSD-CFACN A CSA C22.2 No. 142
RSD-CFACN B CSA C22.2 No. 1010-92
RSD-FC2CN3KM A CSA C22.2 No. 142
RSD-GW2CN C CSA C22.2 No. 142
S200-ACN A CSA C22.2 No. 142
S200-ACN15 A CSA C22.2 No. 142
S200-ACNR A CSA C22.2 No. 142
S200-ACNR15 A CSA C22.2 No. 142
S200-ADN A CSA C22.2 No. 142
S200-ANN A CSA C22.2 No. 142
S200-IA8 A CSA C22.2 No. 142
S200-IA8I A CSA C22.2 No. 142
S200-IB10XOB6 A CSA C22.2 No. 142
S200-IB16 A CSA C22.2 No. 142
S200-IB8 A CSA C22.2 No. 142
S200-IE4XOE2 A CSA C22.2 No. 142
S200-IE4XOE2 B CSA C22.2 No. 142
S200-IE8 B CSA C22.2 No. 142
S200-IF2XOF2I A CSA C22.2 No. 142
S200-IF4I A CSA C22.2 No. 142
S200-IR8 A CSA C22.2 No. 142
S200-IRT8 A CSA C22.2 No. 142
S200-IT8 A CSA C22.2 No. 142
S200-OA8 A CSA C22.2 No. 142
S200-OA8I A CSA C22.2 No. 142
S200-OB16 A CSA C22.2 No. 142
S200-OB16P A CSA C22.2 No. 142
S200-OB8EP A CSA C22.2 No. 142
S200-OE4 A CSA C22.2 No. 142
S200-OE4 B CSA C22.2 No. 142
S200-OF4I A CSA C22.2 No. 142
S200-OW8 A CSA C22.2 No. 142
S200-RPA A CSA C22.2 No. 142
S200-RPA B CSA C22.2 No. 1010-92
S200-RPCD A CSA C22.2 No. 142
S200-RPFM A CSA C22.2 No. 142
S200-TB2 A CSA C22.2 No. 142
S200-TB3 A CSA C22.2 No. 142
S200-TB3G A CSA C22.2 No. 142
S200-TB3S A CSA C22.2 No. 142
S200-TB3T A CSA C22.2 No. 142
S200-TBN A CSA C22.2 No. 142
TC-CCN013 A CSA C22.2 No. 142
TC-CCN014 A CSA C22.2 No. 1010-92
TC-CCR013 A CSA C22.2 No. 142
TC-CCR014 A CSA C22.2 No. 1010-92
Page 14 of 15
TC-CDN011 A CSA C22.2 No. 142
TC-CEN021 A CSA C22.2 No. 1010-92
TC-FCCN01 C CSA C22.2 No. 142
TC-FCCR01 C CSA C22.2 No. 142
TC-FIAH81 B CSA C22.2 No. 142
TC-FID161 A CSA C22.2 No. 142
TC-FIDA81 A CSA C22.2 No. 142
TC-FIL081 A CSA C22.2 No. 142
TC-FIR081 A CSA C22.2 No. 142
TC-FOA041 B CSA C22.2 No. 142
TC-FOD161 A CSA C22.2 No. 142
TC-FODA81 A CSA C22.2 No. 142
TC-FOR081 A CSA C22.2 No. 142
TC-FPCXX2 C CSA C22.2 No. 1010-92
TC-FPDXX2 C CSA C22.2 No. 1010-92
TC-FPDXX3 A CSA C22.2 No. 142
TC-FTB301 A CSA C22.2 No. 142
TC-FTB3T1 A CSA C22.2 No. 142
TC-FXX042 A CSA C22.2 No. 142
TC-IAH061 A CSA C22.2 No. 142
TC-IAH081 A CSA C22.2 No. 1010-92
TC-IAH161 A CSA C22.2 No. 1010-92
TC-IDA161 A CSA C22.2 No. 142
TC-IDD161 A CSA C22.2 No. 142
TC-IDD321 A CSA C22.2 No. 142
TC-IDD321 B CSA C22.2 No. 142
TC-IDJ161 A CSA C22.2 No. 142
TC-IDK161 A CSA C22.2 No. 142
TC-IDW161 A CSA C22.2 No. 142
TC-IDX081 A CSA C22.2 No. 142
TC-IDX161 A CSA C22.2 No. 142
TC-IXL061 A CSA C22.2 No. 142
TC-IXL062 A CSA C22.2 No. 1010-92
TC-IXR061 A CSA C22.2 No. 142
TC-OAH061 A CSA C22.2 No. 142
TC-OAV041 A CSA C22.2 No. 1010-92 After 2007-08
TC-OAV061 A CSA C22.2 No. 142
TC-OAV081 A CSA C22.2 No. 1010-92 After 2007-08
TC-ODA161 A CSA C22.2 No. 1010-92
TC-ODD161 A CSA C22.2 No. 1010-92
TC-ODD321 A CSA C22.2 No. 1010-92
TC-ODJ161 A CSA C22.2 No. 142
Page 15 of 15
TC-ODK161 A CSA C22.2 No. 142
TC-ODX081 A CSA C22.2 No. 142
TC-ODX161 A CSA C22.2 No. 142
TC-ORC081 A CSA C22.2 No. 142
TC-ORC161 A CSA C22.2 No. 142
TC-PAL1C1 A CSA C22.2 No. 142
TC-PAM1B1 A CSA C22.2 No. 142
TC-PAS1A1 A CSA C22.2 No. 142
TC-PCIC01 A CSA C22.2 No. 142
TC-PCIC02 A CSA C22.2 No. 1010-92
TC-RPA001 A CSA C22.2 No. 142
TC-RPA002 A CSA C22.2 No. 1010-92
TC-RPCXX1 A CSA C22.2 No. 1010-92
TC-RPDXX1 A CSA C22.2 No. 1010-92
TC-RPFM01 A CSA C22.2 No. 142
TC-RPFS01 A CSA C22.2 No. 142
TC-RPSCA2 A CSA C22.2 No. 1010-92
TC-ZAL1C1 A CSA C22.2 No. 142
TC-ZAM1B1 A CSA C22.2 No. 142
/jj
Page 1 of 1
CUSTOMER CLASS FILE
Baldor Electric Company 4228-01 063415_0_000

MOTORS AND GENERATORS-For
P.O. Box 2400,
Hazardous Locations
Fort Smith
AR
72902-2400
Class I, Groups C and D, Class II, Groups F and G:
Baldor Model X34M, Frame Sizes 48 and 56, Baldor Designation 410, 413, 416, 424 and 428 with Suffix L
denoting single phase or Suffix M denoting 3 ph, rated 3/4 hp max, 240V, 60Hz max, single phase or 1 hp max,
600V max, 3 ph, 60Hz, 3450 rpm max, with or without over temperature protection.
DC permanent magnet electric motors, Models 34, 35 and 36 frame sizes 56C, 143TC, 145TC. Rated 250V dc
max, 3500 rpm max, 3 hp max, duty rated or continuous, Class A or F insulation. Temperature Coded T3C, T3B,
T4, T4A, T5 or T6.
DC shunt wound or compound wound electric motors, Model 36, frame sizes 56C, 182A and 184AT. Rated 250V
dc max, 3500 Rpm, 2 hp max, continuous, Class A, B or F insulation. Temperature Coded T3C or T3B.
Maximum Horsepower Rating:
Model Frame Size 3500 rpm 2400 rpm 1750 rpm 1150 rpm
34 56C 1-1/2 1 3/4 1/2
35 143TC, 145TC 3 2 1-1/2 1
36 56C, 182A, 184AT - 2 2 1
/sh
http://directories.csa-international.org/xml_transform.asp?xml=certxml\063415_0_000-4228-01.xml&xsl=... 1/18/2007
Page 1 of
CUSTOMER CLASS FILE
Detector Electronics Corporation 4828-01 052532_C_000

SIGNAL APPLIANCES --Combustible Gas
6901 W. 110th St.,
Detection Instruments-For Hazardous Locations
Minneapolis
MN
55438-2392
Class I, Groups A, B, C and D:
l Model C7061C/R8466 Combustible Gas Detection system consisting of C7061C sensors (1 or 2) mounted in the Hazardous Locations, and R8466
controller mounted in a non-hazardous area. Controller rated 24V dc (nominal), 120V or 240V ac, max 18W input. Output relay contacts rated 3A
(non-inductive) at 24V dc, or 120/240V ac.
Note: Sensor enclosures are user-supplied.
Class I, Div. 1, Groups B, C, D; Class I, Zone 1, Group IIB+H2 (T5); Class II, Div. 1, Groups E, F, G; Class III; Class I, Div. 2, Groups A, B, C, D
(T4A); Class I, Zone 2, Group IIC (T4);
Class II, Div. 2, Groups F and G (T4A); Enclosure Type 4X
l Eagle Quantum Premier System consisting of:
"Controller" Model EQ300X Series (Class I, Div. 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when installed in a suitable CSA
Certified labeled Type rated enclosure) rated 18-30 Vdc, 24 Vdc nom., 12 W max. input; relay contacts rated 1 Amp resistive at 30 Vdc; transformer
isolated digital communication I/O ports.
"Power Distribution Module" Model EQ3800 Series (Class I, Div. 2, Groups A, B, C, D (T3A); Class I, Zone 2, Group IIC (T3) only when installed in
a suitable CSA Certified labeled Type rated enclosure) rated 18-30 Vdc, 24 Vdc nom., 10 Amps max. per input; 27.5 Vdc nom. output voltage; 10 Amps
max. alarm output current; 2 Amps max. standby output current; reference manual for device specific output ratings.
"Power Supply" Model EQ2110PS, EQ2130PS and EQ2175PS (Ordinary Locations only) rated 120/208/240 Vac, 50/60 Hz. Model EQ2110PS rated 4
Amps at 120Vac input; 10 Amps at 24 Vdc output. Model EQ2130PS rated 11 / 6 / 6 Amps at 120 / 208 / 240 Vac input; 30 Amps at 24 Vdc output.
Model EQ2175PS rated 24 / 15 / 12 Amps at 120 / 208 / 240 Vac input; 75 Amps at 24 Vdc output.
"Power Supply Monitor" Model EQ2100PSM (Ordinary Locations only) rated 18-30 Vdc, 24 Vdc nom., 2 Watts max. input; 240 Vac max. and 75
Amps max. measurement range; transformer isolated digital communication input/output.
"Direct Current Input/Output" Model EQ3700 Series (Class I, Div. 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when installed in a
suitable CSA Certified labeled Type rated enclosure) rated 18-30 Vdc, 24 Vdc nom., 16.2 Amps input current; 18-30 Vdc output voltage; reference
manual for output current; relay contacts rated 2 Amps resistive at 30 Vdc.; transformer isolated digital communication status input/output.
"Initiating Device Circuit" Models EQ22xxIDC & EQ22xxIDCGF Series rated 18-30 Vdc, 24 Vdc nom., 4 Watts max. input; dual digital inputs
(sealed or unsealed switch or relay contacts); transformer isolated digital communication input/output. The Models EQ22EMIDC & EQ22EMIDCGF
are rated Class I, Division 2, Groups A, B, C and D (T4A) when installed in a suitable CSA Certified labeled Type rated enclosure.
"Ultraviolet Flame Detector" Model EQ22xxUV Series rated 18-30 Vdc, 24 Vdc nom., 4 Watts max. input; transformer isolated digital communication
input/output.
"Ultraviolet and Infrared Flame Detector" Model EQ22xxUVIR Series rated 24 Vdc nom., 5 Watts max. input; transformer isolated digital
communication input/output.
"High Temperature Ultraviolet Flame Detector Module" Model EQ22xxUVHT Series rated 18-30 Vdc, 24 Vdc nom., 4 Watts max. input, transformer
isolated digital communication input/output, pulsed input from a CSA Certified Model C7050B Series Ultraviolet Flame Detector.
"Triple Infrared Flame Detector" Model X3301xxx14 Series (Class I, Div. 1, Groups B, C, D; Class II, Div. 1, Groups E, F, G; Class III; Class I, Div.
2, Groups A, B, C, D (T3C); Class II, Div. 2, Groups F and G (T3C); Enclosure Type 4X) rated 18-32 Vdc, 24 Vdc nom., 12 Watts max. input;
transformer isolated digital communication input/output.
"Infrared Hydrocarbon Gas Detector" Model PIRECLx4 Series (Class I, Div. 1, Groups B, C, D (T4); Class I, Div. 2, Groups A, B, C, D (T4)) rated
18-32 Vdc, 24 Vdc nom., 10 Watts max. input; transformer isolated digital communication input/output. Provides output for HART Communication per
Drawing 007283-001. May be used with Model PIRTB Series PointWatch Termination Box.
"Digital Communication Unit" Model EQ22xxDCUEX Series rated 24 Vdc nom., 6 Watts max. input; transformer isolated digital communication
input/output. For use with Model CGS Series Combustible Gas Sensor and Model STB Sensor Termination Box. The Model EQ22EMDCUEX is rated
Class I, Division 2, Groups A, B, C and D (T4A) when installed in a suitable CSA Certified labeled Type rated enclosure.
"Digital Communication Unit" Model EQ22xxDCU series rated 24 Vdc nom., 6 Watts max. input; 4-20mA input signal, transformer isolated digital
communication input/output. For use with CSA Certified 4-20 mA output devices. The Model EQ22EMDCU is rated Class I, Division 2, Groups A, B,
C and D (T4A) when installed in a suitable CSA Certified labeled Type rated enclosure.
"Network Extender" Model EQ24xxNE series rated 24 Vdc nom., 2.7 Watts max. input; transformer isolated digital communication input/output. The
http://directories.csa-international.org/xml_transform.asp?xml=certxml\052532_C_000-4828-01.xml&xsl=xsl/certrec.xsl 2/13/2007
Page 2 of
Model EQ24EMNE is rated Class I, Division 2, Groups A, B, C and D (T4A) when installed in a suitable CSA Certified labeled Type rated enclosure.
"Agent Release Module" Model EQ25xxARM Series rated 18-30 Vdc, 24 Vdc nom., 75 mA standby, 120 mA alarm input; dual release outputs rated
30 Vdc max., 2 Amps max.; transformer isolated digital communication status input/output. The Model EQ25EMARM is rated Class I, Division 2,
Groups A, B, C and D (T4A) when installed in a suitable CSA Certified labeled Type rated enclosure.
"Signal Audible Module" Model EQ25xxSAM Series rated 18-30 Vdc, 24 Vdc nom., 60 mA standby, 120 mA alarm input; dual outputs rated 30 Vdc
max., 2 Amps max.; transformer isolated digital communication status input/output. The Model EQ25EMSAM is rated Class I, Division 2, Groups A, B,
"Explosionproof Enclosure Solution" Model EQ3900E Series (For EQ3900ExA Series: Class I, Div. 1, Groups B, C, D; Class II, Div. 1, Groups E, F,
G; Class III; Class I, Div. 2, Groups A, B, C, D (T5); Class II, Div. 2, Groups F and G (T5); Enclosure Type 4 only) (For EQ3900ExB Series: Class I,
Div. 1, Groups C and D; Class II, Div. 1, Groups E, F, G; Class III; Class I, Div. 2, Groups A, B, C, D (T5); Class II, Div. 2, Groups F and G (T5);
Enclosure Type 4 only) rated 18-30 Vdc, 24 Vdc nom., 37 Amps max. input.
"NEMA/Type N Enclosure Solution" Model EQ3900N Series (Class I, Div. 2, Groups A, B, C, and D (T3A); Class I, Zone 2, Group IIC (T3) only)
rated 18-30 Vdc, 24 Vdc nom., 53 Amps max. input.
"Relay Module" Model EQ3720 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when installed in a suitable CSA
Certified labeled Type rated enclosure) rated 18-30Vdc, 24V dc nom., 4W, max input; relay contacts rated 2 Amps resistive at 30V dc; transformer
isolated digital communication input/output.
"Ultraviolet Flame Detector" Model X2200xxx14 Series (Class I, Div 1, Groups B, C, D; Class II, Div 1, Groups E, F, G; Class III; Class I, Div 2,
Groups A, B, C, D (T3); Class II, Div 2, Groups F and G (T3); Enclosure Type (4X) rated 18-30Vdc, 24V dc nom., 2.5Watts to 7.6 Watts max. Input;
transformer insolated digital communication input/output.
"Infrared Flame Detector" Model X9800xxx14 Series (Class I, Div 1, Groups B, C, D; Class II, div 1 Groups E, F, G; Class III; Class I, Div 2, Groups
A, B, C, D (T3); Class II, Div 2, Groups F and G (T3); Enclosure Type (4X) rated 18-30Vdc, 24V dc nom., 2.1Watts to 16.5 Watts max. Input;
transformer insolated digital communication input/output
Ultraviolet/Infrared Flame Detector" Model X5200xxx14Series (Class I, Div 1, Groups B, C, D; Class II, Div 1, Groups E, F, G; Class III; Class I, Div
2, Groups A, B, C, D (T3); Class II, Div 2, Groups F and G (T3); Enclosure Type (4X) rated 18-30Vdc, 24V dc nom., 2.8Watts to 17.5 Watts max.
Input; transformer insolated digital communication input/output.
"Ground Fault Monitor" Model EQ2220 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when installed in a
suitable CSA Certified labeled type rated enclosure) rated 18-30V dc, 24V dc nom., 1W max input; relay contacts rated 1A resistive at 30V dc;
"Analog Input Module" Model EQ3710 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when installed in a
suitable CSA Certified labeled type rated enclosure) rated 18-30V dc, 24V dc nom., 6W max input; 18-30V dc output voltage; reference manual for
output current; relay contacts rated 2A resistive at 30V dc; transformer isolated digital communication input/output. For use with CSA Certified 4-
20mA output devices.
"HART" Interface Module" Model HIM P/N 008056-001 (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when
installed in a suitable CSA Certified labeled type rated enclosure) rated 18-30V dc, 24V dc nom., 1W max input.
"Intelligent Protection Module" Model EQ3740 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when installed
in a suitable CSA Certified labeled type rated enclosure) rated 18-30V dc, 24V dc nom., 7W max input; relay contacts rated 2A resistive at 30V dc;
"LON Termination Module" Model LTM P/N 008990-001 (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when
installed in a suitable CSA Certified labeled Type rated enclosure). For use with EQ300X Controller LON COM only.
"Relay Module" Model EQ3720 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when installed in a suitable CSA
Certified labeled Type rated enclosure) rated 18-30V dc, 24V dc nom, 4W max input; relay contacts rated 2A resistive at 30V dc and 0.5A resistive at
125V ac; transformer isolated digital communication input/output.
"Physical Layer Repeater" Model EQ24xxPLR Series rated 18-30V dc, 24V dc nom, 2.7W max input; transformer isolated digital communication
input/output. The Model EQ24EMPLR is rated Class I, Div 2, Groups A, B, C and D (T4A) when installed in a suitable CSA Certified labeled Type
rated enclosure.
"Enhanced Discrete Input/Output" Model EQ3730 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC (T4) only when installed
in a suitable CSA Certified labeled Type rated enclosure) rated 18-30V dc, 24V dc nom, 16.2A input current; 18-30V dc output voltage; reference
manual for output current; relay contacts rated 2A resistive at 30V dc; transformer isolated digital communication input/output. For use with CSA
Certified relay contact output devices.
l "Infrared Hydrocarbon Gas Monitor" Model PIRDUCT Series (Class I, Div. I, Groups B, C, D; Class I, Div 2, Groups A, B, C, D (T3C) rated 18
32V dc, 24V dc nom, 7W max input. May be used with Model EQ22xxDCU Series Module.
Notes:
1. This system is for operation with a computer and software as covered in the instruction manual.
2. Reference drawing 007546-001 for applicable area classification and installation details.
Class I, Div. 1, Groups B, C and D; Class II, Div. 1, Groups E, F and G; Class III:
Class I, Div. 2, Groups A, B, C and D (T4A); Class II, Div. 2, Groups F and G (T4A); Enclosure Type 4X:
l Eagle Quantum System consisting of :
a. "Local Control Unit" Controller, Model EQ2100LCU (Class I, Div. 2, Groups A, B, C and D (T4A only) rated 18-30 vDC, 24 vDC, nom., 0.4
Amps max. input; relays rated 5 Amps resistive at 30 Vdc; transformer digital communication I/O ports. Model EQ2101LCU (Class I, Div. 2
Groups A, B, C and D (T4A only) rated 18-30 Vdc, 24 Vdc, nom., 12 Amps max., input; 2.8 Amps max. system output, 8.0 Amps max. auxiliary
output, relays rated 5 Amps resistive at 30 Vdc.
Page 3 of
b. "Local Control Unit Power Supply" Model EQ2100LCUPS (Ordinary Locations only) rated 120/240V ac, 50/60Hz, 2.5A Amps max input; 8
Amps at 24 Vdc max. output; digital communication input/output. With auxiliary power supply, 1 Amp at 24 Vdc max. output each.
c. "Power Supply" Model EQ2110PS, EQ2130PS and EQ2175PS (Ordinary Locations only) rated 120/208/240 Vac, 50/60 Hz. Model EQ2110PS
rated 4 Amps at 120Vac input; 10 Amps at 24 Vdc output. Model EQ2130PS rated 11/6 / 6 Amps at 120 / 208 / 240 Vac input; 30 Amps at 24
Vdc output. Model EQ2175PS rated 24 / 15 / 12 Amps at 120 / 208 / 240 Vac input; 75 Amps at 24 Vdc output.
d. "Power Supply Monitor" Model EQ2100PSM (Ordinary Locations only) rated 18-30 Vdc, 24 Vdc nom., 2 Watts max. input; 240 Vac max. and 75
Amps max. measurement range; transformer isolated digital communication input/output.
e. "Local Input/Output Unit" Model EQ2100LIOU (Ordinary Locations only). rated 18-30 Vdc nom., 30 Watts max input. Relay module contacts
rated 2 Amps resistive at 24 Vdc. Signal audible module output rated 2 Amps at 24 Vdc; digital communication input/output. Release module
outputs rated 2 Amps at 24 Vdc max., supervisory current 2.5 mA each circuit.
f. "Agent Release Module" Model EQ25xxARM Series rated 18-30 Vdc, 24 Vdc nom., 75 mA standby, 120 mA alarm input; dual release outputs
rated 30 Vdc max., 2 Amps max.; transformer isolated digital communication status input/output. The Model EQ25EMARM is rated Class I,
Division 2, Groups A, B, C and D (T4A) when installed in a suitable CSA Certified labeled Type rated enclosure.
g. "Signal Audible Module" Model EQ25xxSAM Series rated 18-30 Vdc, 24 Vdc nom., 60 mA standby, 120 mA alarm input; dual outputs rated 30
Vdc max., 2 Amps max.; transformer isolated digital communication status input/output. The Model EQ25EMSAM is rated Class I, Division 2,
h. "Initiating Device Circuit" Model EQ22xxIDC and EQ22xxIDCGF Series rated 18-30 Vdc, 24 Vdc nom., 4 Watts max. input; dual digital inputs
(sealed or unsealed switch or relay contacts); transformer isolated digital communication input/output. The Models EQ22EMIDC and
EQ22EMIDCGF are rated Class I, Division 2, Groups A, B, C and D (T4A) when installed in a suitable CSA Certified labeled Type rated
enclosure.
i. "Ultraviolet Flame Detector" Model EQ22xxUV Series rated 18-30 Vdc, 24 Vdc nom., 4 Watts max. input; transformer isolated digital
j. "Ultraviolet and Infrared Frame Detector" Model EQ22xxUVIR Series rated 24 Vdc nom., 5 Watts max. input; transformer isolated digital
k. "High Temperature Ultraviolet Flame Detector Module" Model EQ22xxUVHT Series rated 18-30V dc, 24V dc nom., 4 Watts max input,
transfomer isolated digital communication input/output, pulsed input from a CSA Certified Model C7050B Series Ultraviolet Flame Detector.
l. "Digital Communication Unit" EQ22xxDCUEX Series rated 24V dc nom., 6 Watts max. input; transformer isolated digital communication
input/output. For use with Model CGS Series Combustible Gas Sensors. The Model EQ22EMDCUEX is rated Class I, Division 2, Groups A, B,
m. "Digital Communication Unit" EQ22xxDCU Series rated 24V dc nom., 6 Watts max. input; 4-20mA input signal, transformer isolated digital
communication input/output. For use with CSA Certified 4-20 mA output devices. The Model EQ22EMDCU is rated Class I, Division 2,
n. "Network Extender" EQ24xxNE series rated 24 Vdc nom., 2.7 Watts max. input; transformer isolated digital communication input/output. The
Model EQ24EMNE is rated Class I, Division 2, Groups A, B, C and D :(T4A) when installed in a suitable CSA Certified labeled Type rated
enclosures.
o. Ultraviolet and Infrared Flame Detector" Model X5200xxx24 Series (Class I, Div 1, Groups B, C, D; Class II, Div I, Groups E, F, G; Class III,;
Class I, Div 2, Groups A, B, C, D (T3); Class II, Div 2, Groups F, and G (T3); Enclosure Type 4X) rated 18-30Vdc, 24V dc nom., 2.8Watts to
17.5 Watts max. Input; transformer insolated digital communication input/output
p. "Ultraviolet Flame Detector" Model X2200xxx24 Series (Class I, div 1, Groups B, C, D; Class II, Div 1, Groups E, F, g; Class III; Class I, Div 2,
Groups A, B, C, D (T3); Class II, Div 2, Groups F, and G(T3); Enclosure Type 4X) rated 18-30Vdc, 24V dc nom., 2.5Watts to 7.6 Watts max.
Input; transformer insolated digital communication input/output.
Notes:
1. "xx" suffixes denote type of enclosure material, thread type and number of threaded entries or electronic module intended for use with a suitable
CSA Certified type rated enclosure.
4. The 000821-xxx and 00824-xxx Series utilizes a CSA Certified explosion-proof enclosure to house the EQ2101LCU and a limited number of field
devices.
l Infinit Gas Transmitter Model U9500A Series with enclosure P/N 006264-XXX, input rated 24V dc nom., 6.5W max; operating temperature -
40ºC to +75ºC, contacts rated 30V dc/5A (resistive); for use with Model CGS Series Combustible Gas Sensors. Infiniti Gas Transmitter Model
U9500H Series input rated 24V dc nom., 10.1W max; contacts rated 30V dc/5A (non-inductive); for use with any CSA Certified 4-20mA stand
alone gas detection instruments. Class II, Groups E, F and G; Class III; Enclosure Type 4X CSA Certified when used with Sensor Separation Kit
P/N 226365-106 and 226365-113.
Note: Reference Drawing 006880-001 for applicable area classification and installation details.
Eagle 2000 System consisting of:

(a) "Communication Gateway" Controller Type EA2100CG Series (Ordinary Locations) rack mounted, rated 24V dc nom., 325mA (1.0A start-
up), relays rated 5.0A resistive at 30V dc.
(b) "Digital Communication Unit" Type EA2200DCUEX Series rated 24V dc nom., 180mA (500mA start-up), relay rated 5.0A resistive at 30V dc.
For use with Model CGS Series Combustible Gas Sensors. Class II, Div. 1, Groups E, F and G; Class II, Div. 2, Groups F and G (T4A); Class III;
Enclosure Type 4X CSA Certified when used with Sensor Separation Kit P/N 226365-106 or 226365-113.
(c) "Digital Communication Unit" Type EA2200DCUPIR Series rated 24V dc nom., 180mA (500mA start-up), relay rated 5.0A resistive at 30V dc.
For use with Certified 4-20mA output devices. Class II, Div. 1, Groups E, F and G; Class II, Div. 2, Groups F and G (T4A); Class III; Enclosure Type
Page 4 of
4X CSACertified when used with Sensor Separation Kit P/N 226365-106 or 226365-113.
(d) Communication Module" Type EA2300CM Series rated 24V dc nom., 60mA (without transmitter), relay rated 5.0A resistive at 30V dc.
Type EA2300CM2 Series rated 24V dc nom., 60mA (without transmitter), relay rated 1.0A resistive at 120V dc. For use with CSA Certified 4-20mA
devices.
(e) "Network Extender" Type EA2400NE Series rated 24V dc nom., 135mA, digital input/output. For in extending loop capacity up to a
maximum of 250 nodes and 10,000 metres of wiring. Class I, Div 2, Groups A, B, C and D (T4); Class II, Div 2 Groups F and G(T4); Class III;
Enclosure Type 4X.
(f) "Relay Module" Type EA2500RM Series rated 24V dc nom., 80mA, relay rated 5.0A resistive at 30V dc. Type EA2500RM2 Series rated
24V dc nom., 80mA, relay rated 1.0A resistive at 120V ac. For use with CSA Certified relay output devices.
Notes:
1. This sytem is for operation with a computer and software as covered in the instruction manual.
2. Reference drawing 006794-001 for applicable area classificaiton and installation details.
Class I, Groups B, C and D; Class I, Div 2, Groups A, B, C and D (T4A); Class II, Groups E, F and G; Class II, Div 2, Groups F and G; Class III;
Enclosure Type 4X:
l Sensor Termination Box (STB) 226365 Series input rated 36V dc max, 0.5W or reference CSA Component Certified terminal block rating.
Note: For proper installation, reference sensor for individual hazardous location classification.
Class I, Groups B, C and D; Class II, Groups E, F and G; Class III; Enclosure Type 4X:
l The Model 505 Series Combustible Gas Transmitter rated 24V dc nom., 4.0W max. For use with Model CGS Series Combustible Gas Sensors.
Class II, Groups E, F and G; Class III; Enclosure Type 4X CSA Certified when used with Sensor Separation Kit P/N 226365-118 through 226365
125.
l Model 500 stand alone Combustible Gas Detection Transmitter; 17 to 28V dc; 1.5W (with sensor). For use with Model CGS Series Combustible
Gas Sensors and any CSA Certified 4-20mA controller. Class II, Groups E, F and G; Class III; Enclosure Type 4X CSA Certified when used with
Sensor Separation Kit P/N 226365-102, -114, -116, -117, -126, -128.
l Model 1K/2K/8K stand alone Combustible Gas Detection Transmitter; 10 to 33V dc; 1.5W (with sensor). For use with Model CGS Series
Combustible Gas Sensors and any CSA Certified 4-20mA controller. Class II, Groups E, F and G; Class III; Enclosure Type 4X CSA Certified
when used with Sensor Separation Kit P/N 226365-102, -114, -116, -117, -126, -128.
Class I, Groups B, C and D; Encl 4:
l Model DE3698/R8466 Combustible Gas Detection system consisting of 1 or 2 DE3698 detector head assemblies. Enclosure Detronics P/N
226555-103*. Mounted in the Hazardous Locations, and an R8466 controller mounted in a non-hazardous area. Controller rated 24V dc
(nominal), 120V or 240V ac, max 18W input. Output relay contacts rated 3A (non-inductive) at 24V dc, or 120/240V ac.
Notes:
1. Installation of panel and rack mounted assemblies are subject to the acceptance of the local inspection authorities.
2. The above instruments were also checked for performance and have been found to be acceptable as indicators of the presence of the flammable
gases and vapors within the scope of the certification when used in accordance with the manufacturer's instructions.
3. \Units are marked with "C22.2 No 152-M1984" located adjacent to CSA Monogram.
4. *When Red Dot enclosures P/N 226555-001, -004 for Models 500, 1k, 2k and P/N 226555-003 for Model DE3698 are used, suitable for Class I,
Groups C and D only.
Class I, Div 1, Groups B, C, and D; Class I, Div 2, Groups A, B, C and D; Enclosure Type 4X:
l "PointWatch Termination Box" gas detector junction box, Model PIRTB Series, input voltage 18 to 32V dc, 24V dc nom, 0.5W max, - 40 Deg C
to + 75 Deg C ambient temperature limits. May be used with PointWatch gas detectors, Models PIR9400, PIRVOL, and PIRECL Series.
Class I, Div 1, Groups B, C and D; Class I Div 2, Groups A, B, C and D(T3C):
l "Point Watch" stand alone combustible infrared (IR) gas detector, Model PIR9400 Series, input voltage 18 to 32 V dc, 24V dc nom., 7.0W max,
output 4-20mA. May be used with Point Watch termination box, Type PIRTB.
l "Duct Watch Gas Monitor" stand alone combustible infrared (IR) gas detector, Model PIRDUCT Series, input voltage 18 to 32V dc, 24V dc nom.,
7.0W max, output 4-20mA. May be used with Point Watch Termination Box, Model PIRTB Series.
Note: The XXX for Model 006414-XXX represents the variations in material type ( aluminum or stainless steel), thread type, cover style (short or tall
(with window) ) and number of conduit entries (2, 3, 4, 5, or 6).
Page 5 of
l Combustible Gas Sensor, Model CGS Series, input voltage 3.5V dc, 1.21W max. Performance verified from -40C to +75C ambient temperature
limits. Sensors must be used in conjunction with Detector Electronics Corporation gas transmitter Models 1K/2K/8K, 500, 505, U9500,
EA2200DCUEX or EQ2200DCUEX Series.
Note: The model CGS Series has been explosion proof verified from -55C to + 125C (T3C) ambient temperature limits.
Class I, Div 1, Groups B, C and D (T4); Class I, Div 2, Groups A, B, C and D(T4):
l "PointWatch Eclipse" stand alone infrared (IR) hydrocarbon gas detector, Model PIRECL Series, input voltage 18 to 32 V dc, 24V dc nom, 10W
max, output 4-20 mA , - 40 Deg C to + 75 Deg C ambient temperature limits. Provides output for HART Communication per Drawing 007283-
001. May be used with PointWatch Termination Box, model PIRTB Series.
Class I, Groups C, and D:
Ordinary Locations:
l Model 1000 single channel stand alone Combustible Gas Detection Controller (Ordinary Locations); input rated 120V ac/24V dc/220V ac
nominal; 8.9W max; signal output 4-20mA. For use with any CSA Certified 4-20mA combustible gas detection instruments.
l Model 2000 dual channel stand alone Combustible Gas Detection Controller (Ordinary Locations); input rated 120V ac/24V dc/220V ac nominal;
15.7W max; signal output 4-20mA. For use with any CSA Certified 4-20mA combustible gas detection instruments.
l Model 8000 eight channel stand alone Combustible Gas Detection Controller (Ordinary Locations); input rated 120V ac/24V dc/220V ac nominal;
6.9W per channel max (120V ac); 5.8W per channel max (24V dc); signal output 4-20mA. For use with any CSA Certified 4-20mA combustible
gas detection instruments.
l Model R8471Axxxx single channel stand alone controller (Ordinary Locations), rack mount, input rated 24V dc nominal; 4.0W; signal 4-20mA;
relay contacts rated 250V ac/30V dc, 5A (resistive). For use with any CSA Certified 4-20mA combustible gas detection instruments.
Note: "xxxx" suffixes denote models with or without relays, mounting configuration and range configuration.
/mer
Page 1 of 7
CUSTOMER CLASS FILE
Detector Electronics Corporation 4828-02 052532_C_000

SIGNAL APPLIANCES-Toxic Gas
6901 W. 110th St., Detection Instruments - For Hazardous
Locations
Minneapolis
MN
55438-2392
Class I, Groups A, B, C and D:
Model C7064C hydrogen sulphide gas detector, rated 24V dc nom, 4-20mA, Temp. Code T4A, intrinsically safe
when connected to CSA Certified zener barriers, MTL728 or 787S or 788 or 705 or DetTronics Controllers Model
U8800 or U8810. For use with or without sensor separation kit Part No 226365-104 when installed per drawing
No. 6089-001.
Toxic gas detector controllers, Models 1100, 2100 and 8100, for use with submittor's sensors. Controllers mounted
outside the hazardous area. 1100 and 2100 are rated 120V, 60Hz; or 24V dc, 12W input. Output contacts rated
120V ac/24V dc, 10A. Model 8100 rated 120V ac, 60Hz, or 24V dc, 35W max. Alarm contacts rated 120V ac/30V
dc, 3A resistive.
Sensor/transmitter (CL2) Model C7067E, rated 24V dc nom., output rated 4-20mA. Intrinsically safe when
installed per drawing No 006160-001.
Class I, Div. 1, Groups B, C, D; Class I, Zone 1, Group IIB+H2 (T5); Class II, Div. 1, Groups E, F, G; Class III;
Class I, Div. 2, Groups A, B, C, D (T4A); Class I, Zone 2, Group IIC (T4);
Class II, Div. 2, Groups F and G (T4A); Enclosure Type 4X
Eagle Quantum Premier System consisting of:
- "Controller" Model EQ3000, EQ3001 or EQ3005 Series (Class I, Div. 2, Groups A, B, C, D (T4); Class I,
Zone 2, Group IIC (T4) only when installed in a suitable CSA Certified labeled Type rated enclosure) rated
18-30 Vdc, 24 Vdc nom., 12 W max. input; relay contacts rated 1 Amp resistive at 30 Vdc; transformer
isolated digital communication I/O ports.
- "Power Distribution Module" Model EQ3800 Series (Class I, Div. 2, Groups A, B, C, D (T3A); Class I,
18-30 Vdc, 24 Vdc nom., 10 Amps max. per input; 27.5 Vdc nom. output voltage; 10 Amps max. alarm
output current; 2 Amps max. standby output current; reference manual for device specific output ratings.
- "Power Supply" Model EQ2110PS, EQ2130PS and EQ2175PS (Ordinary Locations only) rated
120/208/240 Vac, 50/60 Hz. Model EQ2110PS rated 4 Amps at 120Vac input; 10 Amps at 24 Vdc output.
Model EQ2130PS rated 11 / 6 / 6 Amps at 120 / 208 / 240 Vac input; 30 Amps at 24 Vdc output. Model
EQ2175PS rated 24 / 15 / 12 Amps at 120 / 208 / 240 Vac input; 75 Amps at 24 Vdc output.
- "Power Supply Monitor" Model EQ2100PSM (Ordinary Locations only) rated 18-30 Vdc, 24 Vdc nom., 2
Watts max. input; 240 Vac max. and 75 Amps max. measurement range; transformer isolated digital
- "Direct Current Input/Output" Model EQ3700 Series (Class I, Div. 2, Groups A, B, C, D (T4); Class I,
18-30 Vdc, 24 Vdc nom., 16.2 Amps input current; 18-30 Vdc output voltage; reference manual for output
current; relay contacts rated 2 Amps resistive at 30 Vdc.; transformer isolated digital communication status
input/output.
http://directories.csa-international.org/xml_transform.asp?xml=certxml\052532_C_000-4828-02.xml&xsl=... 2/13/2007
Page 2 of 7
- "Initiating Device Circuit" Models EQ22xxIDC & EQ22xxIDCGF Series rated 18-30 Vdc, 24 Vdc nom., 4
Watts max. input; dual digital inputs (sealed or unsealed switch or relay contacts); transformer isolated
digital communication input/output. The Models EQ22EMIDC & EQ22EMIDCGF are rated Class I,
Division 2, Groups A, B, C and D (T4A) when installed in a suitable CSA Certified labeled Type rated
enclosure.
- "Ultraviolet Flame Detector" Model EQ22xxUV Series rated 18-30 Vdc, 24 Vdc nom., 4 Watts max. input;
- "Ultraviolet and Infrared Flame Detector" Model EQ22xxUVIR Series rated 24 Vdc nom., 5 Watts max.
input; transformer isolated digital communication input/output.
- "High Temperature Ultraviolet Flame Detector Module" Model EQ22xxUVHT Series rated 18-30 Vdc, 24
Vdc nom., 4 Watts max. input, transformer isolated digital communication input/output, pulsed input from a
CSA Certified Model C7050B Series Ultraviolet Flame Detector.
- "Infrared Flame Detector" Model X3301xxx14 Series (Class I, Div. 1, Groups B, C, D; Class II, Div. 1,
Groups E, F, G; Class III; Class I, Div. 2, Groups A, B, C, D (T3C); Class II, Div. 2, Groups F and G (T3C);
Enclosure Type 4X) rated 18-32 Vdc, 24 Vdc nom., 12 Watts max. input; transformer isolated digital
- "Digital Communication Unit" Model EQ22xxDCU series rated 24 Vdc nom., 6 Watts max. input; 4-
20mA input signal, transformer isolated digital communication input/output. For use with CSA Certified 4-
20 mA output devices. The Model EQ22EMDCU is rated Class I, Division 2, Groups A, B, C and D (T4A)
when installed in a suitable CSA Certified labeled Type rated enclosure.
- "Network Extender" Model EQ24xxNE series rated 24 Vdc nom., 2.7 Watts max. input; transformer
isolated digital communication input/output. The Model EQ24EMNE is rated Class I, Division 2, Groups A,
B, C and D (T4A) when installed in a suitable CSA Certified labeled Type rated enclosure.
- "Agent Release Module" Model EQ25xxARM Series rated 18-30 Vdc, 24 Vdc nom., 75 mA standby, 120
mA alarm input; dual release outputs rated 30 Vdc max., 2 Amps max.; transformer isolated digital
communication status input/output. The Model EQ25EMARM is rated Class I, Division 2, Groups A, B, C
and D (T4A) when installed in a suitable CSA Certified labeled Type rated enclosure.
- "Signal Audible Module" Model EQ25xxSAM Series rated 18-30 Vdc, 24 Vdc nom., 60 mA standby, 120
mA alarm input; dual outputs rated 30 Vdc max., 2 Amps max.; transformer isolated digital communication
status input/output. The Model EQ25EMSAM is rated Class I, Division 2, Groups A, B, C and D (T4A)
when installed in a suitable CSA Certified labeled Type rated enclosure.
- "Explosionproof Enclosure Solution" Model EQ3900E Series (For EQ3900ExA Series: Class I, Div. 1,
Groups B, C, D; Class II, Div. 1, Groups E, F, G; Class III; Class I, Div. 2, Groups A, B, C, D (T5); Class II,
Div. 2, Groups F and G (T5); Enclosure Type 4 only) (For EQ3900ExB Series: Class I, Div. 1, Groups C
and D; Class II, Div. 1, Groups E, F, G; Class III; Class I, Div. 2, Groups A, B, C, D (T5); Class II, Div. 2,
Groups F and G (T5); Enclosure Type 4 only) rated 18-30 Vdc, 24 Vdc nom., 37 Amps max. input.
- "NEMA/Type N Enclosure Solution" Model EQ3900N Series (Class I, Div. 2, Groups A, B, C, and D
(T3A); Class I, Zone 2, Group IIC (T3) only) rated 18-30 Vdc, 24 Vdc nom., 53 Amps max. input.
- "Relay Module" Model EQ3720 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2, Group IIC
(T4) only when installed in a suitable CSA Certified labeled Type rated enclosure) rated 18-30Vdc, 24V dc
nom., 4W, max input; relay contacts rated 2 Amps resistive at 30V dc; transformer isolated digital
- "Ultraviolet Flame Detector" Model X2200xxx14 Series (Class I, Div 1, Groups B, C, D; Class II, Div 1,
Groups E, F, G; Class III; Class I, Div 2, Groups A, B, C, D (T3); Class II, Div 2, Groups F and G (T3);
Enclosure Type (4X) rated 18-30Vdc, 24V dc nom., 2.5 Watts to 7.6 Watts max. Input; transformer
insolated digital communication input/output.
- "Infrared Flame Detector" Model X9800xxx14 Series (Class I, Div 1, Groups B, C, D; Class II, div 1
Groups E, F, G; Class III; Class I, Div 2, Groups A, B, C, D (T3); Class II, Div 2, Groups F and G (T3);
Enclosure Type (4X) rated 18-30Vdc, 24V dc nom., 2.1Watts to 16.5 Watts max. Input; transformer
- Ultraviolet/Infrared Flame Detector" Model X5200xxx14 Series (Class I, Div 1, Groups B, C, D; Class II,
Div 1, Groups E, F, G; Class III; Class I, Div 2, Groups A, B, C, D (T3); Class II, Div 2, Groups F and G
(T3); Enclosure Type (4X) rated 18-30Vdc, 24V dc nom., 2.8 Watts to 17.5 Watts max. Input; transformer
- "Ground Fault Monitor" Model EQ2220 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2,
Group IIC (T4) only when installed in a suitable CSA Certified labeled type rated enclosure) rated 18-30V
Page 3 of 7
dc, 24V dc nom., 1W max input; relay contacts rated 1A resistive at 30V dc; transformer isolated digital
- "Analog Input Module" Model EQ3710 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I, Zone 2,
Group IIC (T4) only when installed in a suitable CSA Certified labeled type rated enclosure) rated 18-30V
dc, 24V dc nom., 6W max input; 18-30V dc output voltage; reference manual for output current; relay
contacts rated 2A resistive at 30V dc; transformer isolated digital communication input/output. For use with
CSA Certified 4-20mA output devices.
- "HART" Interface Module" Model HIM P/N 008056-001 (Class I, Div 2, Groups A, B, C, D (T4); Class
I, Zone 2, Group IIC (T4) only when installed in a suitable CSA Certified labeled type rated enclosure) rated
18-30V dc, 24V dc nom., 1W max input.
- "Intelligent Protection Module" Model EQ3740 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I,
Zone 2, Group IIC (T4) only when installed in a suitable CSA Certified labeled type rated enclosure) rated
18-30V dc, 24V dc nom., 7W max input; relay contacts rated 2A resistive at 30V dc; transformer isolated
digital communication input/output.
- "Enhanced Discrete Input/Output" Model EQ3730 Series (Class I, Div 2, Groups A, B, C, D (T4); Class I,
18-30V dc, 24V dc nom, 16.2A input current; 18-30V dc output voltage; reference manual for output
current; relay contacts rated 2A resistive at 30V dc; transformer isolated digital communication
input/output. For use with CSA Certified relay contact output devices.
Notes:
Class I, Groups B, C and D; Class II, Groups E, F and G; Class III; Enclosure Type 4X:
Class I, Div. 2, Groups A, B, C and D (T4A); Class II, Div. 2, Groups F and G (T4A); Enclosure Type 4X:
Eagle 2000 System consisting of:
(a) "Commmunication Gateway" controller Type EA2100CG Series (Ordinary Locations) rack mounted, rated 24V dc
nom., 325mA (1.0A start-up), relays rated 5.0A resistive at 30V dc.
(b) "Digital Communication Unit" Type EA2200DCUUNIV Series rated 24V dc nom., 180mA (500mA start-up), relay
rated 5.0A resistive at 30V dc. For use with CSA Certified 4-20mA output devices. Class II, Div. 1, Groups E, F and G;
Class II, Div. 2, Groups F and G (T4A); Class III; Enclosure Type 4X CSA Certified when used with Sensor Separation
Kit P/N 226365-106 or 226365-113.
(d) "Communication Module" Type EA2300CM Series rated 24V dc nom., 60mA (without transmitter), relay rated
5.0A resistive at 30V dc. Type EA2300CM2 Series rated 24V dc nom., 60mA (without transmitter), relay rated 1.0A
resistive at 120V ac. For use with CSA Certified 4-20mA devices.
(e) "Network Extender" Type EA2400NE Series rated 24V dc nom., 135mA, digital input/output. For use in extending
loop capacity up to a maximum of 250 nodes and 10,000 metres of wiring. Class I, Div 2, Groups A, B, C and D (T4);
Class II, Div 2, Groups F and G (T4); Class III; enclosure Type 4X.
(f) "Relay Module: Type EA2500RM Series rated 24V dc nom., 80mA, relay rated 5.0A resistive at 30V dc. Type
EA2500RM2 Series rated 24V dc nom., 60mA (without transmitter), relay rated 1.0A resistive at 120V ac. For use with
CSA Certified relay output devices.
Notes:
Class I, Div. 1, Groups B, C and D; Class II, Div. 1, Groups E, F and G; Class III:
Class I, Div. 2, Groups A, B, C and (T4A); Class II, Div. 2, Groups F and G (T4A); Enclosure Type 4X:
Eagle Quantum System consisting of :
Page 4 of 7
1. "Local Control Unit" Controller, Model EQ2100LCU and EQ2101LCU (Class I, Div. 2, Groups A, B, C and D
(T4A only) rated 18-30 vDC, 24 vDC, nom., 0.4 Amps max. input; relays rated 5 Amps resistive at 30 Vdc;
transformer digital communication I/O ports. Model EQ2101LCU (Class I, Div. 2 Groups A, B, C and D (T4A
only) rated 18-30 Vdc, 24 Vdc, nom., 12 Amps max., input; 2.8 Amps max. system output, 8.0 Amps max.
auxiliary output, relays rated 5 Amps resistive at 30 Vdc.
2. "Local Control Unit Power Supply" Model EQ2100LCUPS (Ordinary Locations only) rated 120/240V ac,
50/60Hz, 2.5A Amps max input; 8 Amps at 24 Vdc max. output; digital communication input/output. With
auxiliary power supply, 1 Amp at 24 Vdc max. output each.
3. "Power Supply" Model EQ2110PS, EQ2130PS and EQ2175PS (Ordinary Locations only) rated 120/208/240 Vac,
50/60 Hz. Model EQ2110PS rated 4 Amps at 120Vac input; 10 Amps at 24 Vdc output. Model EQ2130PS rated
11/6 / 6 Amps at 120 / 208 / 240 Vac input; 30 Amps at 24 Vdc output. Model EQ2175PS rated 24 / 15 / 12 Amps
at 120 / 208 / 240 Vac input; 75 Amps at 24 Vdc output.
4. "Power Supply Monitor" Model EQ2100PSM (Ordinary Locations only) rated 18-30 Vdc, 24 Vdc nom., 2 Watts
max. input; 240 Vac max. and 75 Amps max. measurement range; transformer isolated digital communication
input/output.
5. "Local Input/Output Unit" Model EQ2100LIOU (Ordinary Locations only). rated 18-30 Vdc nom., 30 Watts max
input. Relay module contacts rated 2 Amps resistive at 24 Vdc. Signal audible module output rated 2 Amps at 24
Vdc; digital communication input/output. Release module outputs rated 2 Amps at 24 Vdc max., supervisory
current 2.5 mA each circuit.
6. "Agent Release Module" Model EQ25xxARM Series rated 18-30 Vdc, 24 Vdc nom., 75 mA standby, 120 mA
alarm input; dual release outputs rated 30 Vdc max., 2 Amps max.; transformer isolated digital communication
status input/output. The Model EQ25EMARM is rated Class I, Division 2, Groups A, B, C and D (T4A) when
installed in a suitable CSA Certified labeled Type rated enclosure.
7. "Signal Audible Module" Model EQ25xxSAM Series rated 18-30 Vdc, 24 Vdc nom., 60 mA standby, 120 mA
alarm input; dual outputs rated 30 Vdc max., 2 Amps max.; transformer isolated digital communication status
input/output. The Model EQ25EMSAM is rated Class I, Division 2, Groups A, B, C and D (T4A) when installed
in a suitable CSA Certified labeled Type rated enclosure.
8. "Initiating Device Circuit" Model EQ22xxIDC and EQ22xxIDCGF Series rated 18-30 Vdc, 24 Vdc nom., 4 Watts
max. input; dual digital inputs (sealed or unsealed switch or relay contacts); transformer isolated digital
communication input/output. The Models EQ22EMIDC and EQ22EMIDCGF are rated Class I, Division 2,
9. "Ultraviolet Flame Detector" Model EQ22xxUV Series rated 18-30 Vdc, 24 Vdc nom., 4 Watts max. input;
10. "Ultraviolet and Infrared Frame Detector" Model EQ22xxUVIR Series rated 24 Vdc nom., 5 Watts max. input;
11. "High Temperature Ultraviolet Flame Detector Module" Model EQ22xxUVHT Series rated 18-30V dc, 24V dc
nom., 4 Watts max. input, transformer isolated digital communication input/output, pulsed input from a CSA
Certified Model C7050B Series Ultraviolet Flame Detector.
12. "Digital Communication Unit" EQ22xxDCU Series rated 24V dc nom., 6 Watts max. input; 4-20mA input signal,
transformer isolated digital communication input/output. For use with CSA Certified 4-20 mA output devices.
The Model EQ22EMDCU is rated Class I, Division 2, Groups A, B, C and D (T4A) when installed in a suitable
CSA Certified labeled Type rated enclosure.
13. "Network Extender" EQ24xxNE series rated 24 Vdc nom., 2.7 Watts max. input; transformer isolated digital
communication input/output. The Model EQ24EMNE is rated Class I, Division 2, Groups A, B, C and D :(T4A)
when installed in a suitable CSA Certified labeled Type rated enclosures.
14. Ultraviolet and Infrared Flame Detector" Model X5200xxx24 Series (Class I, Div 1, Groups B, C, D; Class II, Div
I, Groups E, F, G; Class III,; Class I, Div 2, Groups A, B, C, D (T3); Class II, Div 2, Groups F, and G (T3);
Enclosure Type 4X) rated 18-30Vdc, 24V dc nom., 2.8Watts to 17.5 Watts max. Input; transformer insolated
digital communication input/output
15. "Ultraviolet Flame Detector" Model X2200xxx24 Series (Class I, div 1, Groups B, C, D; Class II, Div 1, Groups
E, F, g; Class III; Class I, Div 2, Groups A, B, C, D (T3); Class II, Div 2, Groups F, and G(T3); Enclosure Type
4X) rated 18-30Vdc, 24V dc nom., 2.5Watts to 7.6 Watts max. Input; transformer insolated digital communication
input/output
Notes:
Page 5 of 7
1. "xx" suffixes denote type of enclosure material, thread type and number of threaded entries or electronic module
intended for use with a suitable CSA Certified type rated enclosure.
4. The 000821-xxx and 00824-xxx Series utilizes a CSA Certified explosion-proof enclosure to house the
EQ2101LCU and a limited number of field devices.
Class I, Div. 1, Groups B, C and D; Class I, Div. 2, Groups A, B, C and D(TA);

Class II, Div. 1, Groups E, F and G; Class II, Div. 2, Groups F and G (T4A); Class III; Enclosure Type 4X:
Infiniti Gas Transmitter Models U9500B20 Series, U9500C Series, U9500D Series, U9500E Series, U9500F
Series and U9500G Series, with enclosure P/N 006264-XXX, input rated 24V dc nom., 5.0W max; operating
temperature -40ºC to +75ºC, contacts rated 30V dc/5A (resistive); for use with any Certified 4-20mA stand alone
gas detection instruments. Class II, Groups E, F and G; Class III; Enclosure Type 4X CSA Certified when used
with Sensor Separation Kit P/N 226365-104 and 226365-111.
Infiniti Gas Transmitter Models U9500B21 Series with enclosure P/N 006264-XXX, input rated 24V dc nom.,
6.5W max; operating temperature -40ºC to +75ºC, contacts rated 30V dc/5A (resistive); for use with Type 225629
MOS Hydrogen Sulfide Gas Sensor. Class II, Groups E, F and G; Class III; Enclosure Type 4X CSA Certified
when used with Sensor Separation Kit P/N 226365-104 and 226365-111.
Class I, Groups B,C and D; Class I, Div 2, Groups A,B,C and D (T4A); Class II, Groups E, F and G; Class II, Div 2,
Groups F and G; Class III; Enclosure Type 4X:
Sensor Termination Box (STB) 226365 Series input rated 36V dc max, 0.5W or reference CSA Component
Certified terminal block rating.
Note: For proper installation, reference sensor for individual hazardous location classification.
Class I, Div. 1, Groups B, C and D; Class I, Div. 2, Groups A, B, C and D (T4A):
Model U8800 H2S toxic gas controller/transmitter (explosion-proof), CSA Encl 4, rated 24V dc nom., 150mA;
signal 4-20mA; relay contacts 30V dc, 5A; provides intrinsically safe output for connection to Model C7064C
hydrogen sulphide gas detector. May be used with sensor separation kit Part No 226365-104 when installed per
drawing No. 6089-001.
Model U8810 H2S toxic gas controller/transmitter (explosion-proof), CSA Encl 4, rated 24V dc-50mA, signal 4-
20mA; provides intrinsically safe output for connection to Model C7064C H2S gas detector. May be used with
sensor separation kit Part No 226365-104 when installed per drawing No. 6089-001.
Model 415 N2S transmitter, CSA Encl. 4; input rated 24V dc-4W. May be used with sensor separation kit Part No
226365-107.
Series Infiniti toxic gas detector/controller, Models U9500 XXXXX, input rated 24V dc nom, 7.7W; contacts rated
30V dc/5A resistive. For use with sensors Models C7064C and C7067E. May be used with sensor separation kit
Part No 226365-104.
Note: XXXXX suffixes denote type of toxic sensor and models with or without relays.
Sensor/Transmitter Model C7064E5014 (H2S) input rated 24V dc nominal, output rated 4-20mA.
Note: These devices are Certified only for electrical safety and use in hazardous locations. Hazardous location testing
has been successfully completed on Model C7064E5014 from an ambient temperature range of -40°C to +75°C;
however, the detector label marking indicates -40°C to +50°C.
Page 6 of 7
Class I, Div. 1, Groups C and D; Class I, Div. 2, Groups A, B, C and D (T4A):
Sensor/Transmitters Model C7064E Series (H2S), Model C7065E Series (O2), Model C7066E Series (CO), Model
C7068E Series (SO2), and Model C7069E Series (NO2) input rated 24V dc nominal, output rated 4-20mA.
Note: These devices are Certified only for electrical safety and use in hazardous locations. Hazardous location testing
has been successfully completed on the Model C7064E Series from an ambient temperature range of -40°C to +75°C;
however, the detector label marking indicates -40°C to +50°C.
Fixed hydrogen sulphide gas detection system, Model 710 comprising of the following: A control station, panel or
rack-mounted type with single or multi (6 max) plug-in module rack/frames, 120/240V ac, 60Hz or 12.5V dc,
10W (each plug-in module), alarm contact rating 120V ac, 60hz or 30V dc, 3A resistive, for installation in an
ordinary (non-hazardous) location, and remote detector head(s), Type 226115, for use in hazardous locations.
Fixed hydrogen sulphide gas detection system, Model 740 comprising of the following: A control station, panel or
rack-mounted type with single or multi (4 max), plug-in module rack frames (controller), 120V ac, 60Hz and/or
24V dc, 15W (each plug-in module), alarm contact rating 120V ac, 60Hz or 30V dc, 3A resistive, for installation
in non-hazardous locations, and a remote detector head(s), Model 704 enclosure P/N 225690-001 or P/N 225693-
102 for use in hazardous locations.
Notes:
1. Installation of panel and rack-mounted assemblies are subject to the acceptance of the local inspection authorities
having jurisdiction.
2. The above toxic gas detection system(s) are Certified for electrical safety and for use in hazardous locations only,
and not for performance.
Model 410, H2S Detector, CSA Encl. 4 input rated 24V dc, 4W; for use with P/N 225629 sensors.
Ordinary Locations:
Model R8471Bxxxx single channel controller (H2S) (Ordinary Locations), rack mount, input rated 24V dc nom.,
4.0W; signal 4-20mA; relay contacts rated 250V ac/30V dc, 5A (resistive). For use with any CSA Certified 4-
20mA H2S gas detection instruments.
Model R8471Cxxxx single channel controller (O2) (Ordinary Locations), rack mount, input rated 24V dc nom.,
20mA O2 gas detection instruments.
Model R8471Dxxxx single channel controle (CL2) (Ordinary Locations), rack mount, input rated 24V dc nom.,
20mA CL2 gas detection instruments.
Model R8471Exxxx single channel controller (CO) (Ordinary Locations), rack mount, input rated 24V dc nom.,
20mA CO gas detection instruments.
Model R8471Fxxxx single channel controller (SO2) (Ordinary Locations), rack mount, input rated 24V dc nom.,
20mA SO2 gas detection instruments.
Model R8471Gxxxx single channel controller (NO2) (Ordinary Locations), rack mount, input rated 24V dc nom.,
20mA NO2 gas detection instruments.
Note: "xxxx" suffixes denote models with or without relays, mounting configuration and range configuration.
Class I, Div. 1, Groups B, C and D; Class I, Div 2, Groups A, B, C and D:
MOS Hydrogen Sulfide Gas Sensor, Type 225629 Series, input voltage 4.5V dc maximum, 0.8W maximum.
Sensors -001 through -004 must be used in conjunction with Detector Electronics Corporation gas transmitter
Page 7 of 7
Models 410. Sensors -007, -008, - 009 and -010 must be used in conjunction with Detector Electronics
Corporation gas transmitter U9500B21 Series.
/mer
Page 1 of 2
CUSTOMER CLASS FILE
Versa Products Company, Inc. 3228-01 045277_0_000

22 Spring Valley Rd., VALVES-For Hazardous Locations
Paramus
New Jersey
07652
Class I Groups C and D, Class II Groups E, F and G; T3C;

Class I, Division 2, Groups A, B,C and D; Class II, Division 2, Groups E, F and G; Temp Code T3C:
l Valves solenoid operated:
Series A - Pneumatic or hydraulic service, pilot operated, 4-way with suffix "XX" max pressure 200 psi pneumatic, 300 psi hydraulic.
Series B - Pneumatic service only, pilot operated, 2 and 3-way with suffix "XX" max pressure 200 psi.
Series E - Pneumatic or hydraulic service, direct solenoid operated; 2 and 3-way directional and multi-directional. With suffix "XX"
max pressure 250 psi
Series K - Pneumatic service only, pilot operated, 2, 3, 4 or 5-way, 2, 3, 4 or 8 position. Suffix "XX" max pressure 175 psi.
Series M - Pneumatic service pilot operated, 2-way. Suffix "XX" max pressure 200 psi.
Series T - Hydraulic service only, pilot operated, 2, 3, 4, 5, 7 or 8-way. Suffix "XX" max pressure 500 psi
Series V - Pneumatic service only, 2, 3, 4, 5, 7 or 8-way. Suffix "XX" max pressure 200 psi
Series V(316)- Pneumatic service only, 3, 4, 5, 7 or 8-way. Suffix "XX" max pressure 200 psi.
Suffix "XX" rated 480 ac, 60Hz max, 120V dc max 12W max for Series 20 solenoid operators and rated 480V ac max, 50/60Hz, 5.6W
max, 6 to 250V ac 7.2W max for Series 50 solenoid operators.
Notes:
1. Prefix letters and numbers added to the valve series designation indicates valve type, port sizes, body and flow patterns etc
2. Additional suffix detail designations PC and PS, G5R, M, M5R, 3, B, ST, G, FS, HT and N indicate options on valve assemblies.
3. The additional suffix letters and/or numbers indicate minor external mechanical variation
4. All valves are Certified as component parts for use in other equipment where the suitability of the combination is to be determined
by CSA International
5. Series V(316) uses operators V0E51 through 56 only.
l Solenoid valve operators, 480V and less, 50/60Hz, 7.3W; 120V dc and less, 9.5W; Models VOE21, VOE22, VOEH22, VOE23,
VOE24, VOE25 and VOE26 with suffix letter CC followed by letter F, H, M, P or V with or without suffix letter B, with or
without additional suffix letters. Models VOE21, VOE22, VOEH22, VOE23, VOE24, VOE25 and VOE26 followed by letter Z
with a five digit number suffix followed by letters CC followed by letter F, H, M, P or V.
l Solenoid operators, Models VOE51, VOE52, VOE53, VOE54, VOE55 and VOE56, followed by letters CC, followed by letters
B, M or P, rated 12 to 480V, 50/60Hz, 5.6W max, 6 to 250V dc, 7.2W max.
l Solenoid operators, rated 12 to 240V, 60Hz, 1.8W, 5 to 120V dc, 1.8W:
Models VOEL51, VOEL52 and VOEL53 followed by letters C or CC, followed by letters B, H, M or P.
Models VOEL51, VOEL52 and VOEL53 followed by letter Z with a five digit number suffix, followed by letters CB, CH, CM
CP, CCB, CCH, CCM or CCP.
Notes:
1. All solenoid operators Series 20 and 50 are certified for use in other equipment where the suitability of the combination is to be
determined by CSA International.
2. Additional suffix detail designation for Series 20 and 50 solenoid operators: FS, PS, PC, HT, 3, ST, N.
Class I, Div 1, Groups C and D; Class II, Div 1, Groups E, F and G; Temperature Code T6; Type 4X and 6P:
Class I, Div 2, Groups C and D; Class II, Div 2, Groups E, F and G; Type 4X and 6P:
l Series E3SM-I-88-316-II-III-IV Solenoid Operated Valves for general purposes, supply input rated 24 VDC, 1.86 Watts or
12VDC, 0.85 Watt, Maximum Working Pressure 125 PSI, Factory Sealed, -20°C to +49°C ambient.
http://directories.csa-international.org/xml_transform.asp?xml=certxml\045277_0_000-3228-01.xml&xsl=xsl/certrec.xsl 3/30/2006
Page 2 of 2
/gl
Page 1 of 2
Class Description
CLASS NUMBER: 3228-01 DESCRIPTION: VALVES-For Hazardous Locations
COVERAGE:
Electrically operated general purpose valves and safety valves intended for use in hazardous locations for the control of fluids (e.g. air,
gases, oils, refrigerants, steam, water) and rated 600 volts and less. Valves intended for use in other equipment are subject to additional
investigation with the equipment.
This category does not include performance capabilities of equipment.
REQUIREMENTS:
CSA Standard C22.2 No 0 General Requirements - Canadian Electrical Code, Part II

CSA Standard C22.2 No 25 Enclosures for Use in Class II Groups E, F and G Hazardous
Locations
CSA Standard C22.2 No 30 Explosion-Proof Enclosures for Use in Class I Hazardous
Locations
CSA Standard C22.2 No 139 Electrically Operated Valves
CSA Standard E79-0 Electrical Apparatus for Electrical Gas Atmospheres Part 0:
General Requirements
CSA Standard E79-1 Electrical Apparatus for Explosive Gas Atmospheres - Part
1: Construction and Verification Test of Flameproof
Enclosures of Electrical Apparatus
7: Increased Safety "e"
18: Encapsulation "m"
CSA Standard E1241-1-1 Electrical Apparatus for Use in the Presence of Combustible
Dust - Part 1: Electrical Apparatus Protected by Enclosures
The certified equipment appearing in this classification is judged to comply with the applicable requirements of the NFPA 70 National
Electrical Code (NEC), for use in hazardous locations.
MARKING:
l submittor's identification;
l model designation or equivalent;
l suitable words, numerals or symbols to identify a safety valve;
l maximum operating pressure differential rating, type of fluid, intended direction of flow;
l complete electrical rating;
l applicable hazardous locations designation;
l time rating if not continuous;
l cautions, warnings and additional markings as may be required;
l CSA Monogram.
In addition, equipment intended for display, sale or use in the USA, is required to include other information such as warning statements,
installation instructions, etc., as may be specified in the NEC.
/mkc
http://directories.csa-international.org/xml_transform.asp?xml=classxml/3228-01.xml&xsl=xsl/class.xsl 3/30/2006
Page 2 of 2
http://directories.csa-international.org/xml_transform.asp?xml=classxml/3228-01.xml&xsl=xsl/class.xsl 3/30/2006
Page 1 of 3
CUSTOMER CLASS FILE
Precision Engine Controls Corporation 3228-01 043366_0_000

11661 Sorrento Valley Rd, VALVES-For Hazardous Locations
San Diego
CA
92121-1083
Class I, Group D:
l Model VG-2.0, with cast aluminum or stainless steel body, rated 30Vdc max 100W
- P/N 5001892, Temp Code T3A for use in 93ºC ambient.
l Fuel Metering Valve for Gas Turbines, Model VG2.0, rated 30Vdc max, 100W, or 50W
- P/N 71800317-X, Temp Code T3A for use in 93ºC ambient.
Note: Suffix numbers following the basic model designation denote calibrated fuel flow and designated supply pressure;
suffix letter after "G" denotes body material.
Class I, Division 1, Groups B, C and D:
l Liquid Fuel Metering Valve for Gas Turbines, Model VL10000EP Series, rated 30V dc max, 25W max; Temp
Code T4, for use in 93°C max ambient.
Note: Suffix numbers to the "VL" designation denote fuel flow in pounds per hour. Valve is calibrated for suffix
numbers ranging from 8000 to 24000 inclusive.
l Fuel Metering Valve for Gas Turbines, Model VG-1.5; rated 30 Vdc max, 25 W max.
- P/N 5000812-X, Temp Code T4 for use in 82°C ambient.
l Fuel Metering Valve for Gas Turbines, VL Series, rated 30V dc max, 25W max.
Class I, Division 2, Groups A, B, C and D
http://directories.csa-international.org/xml_transform.asp?xml=certxml\043366_0_000-3228-01.xml&xsl=xs... 1/7/2008
Page 2 of 3
Class I, Division 2, Groups B, C, and D; T4; CSA Encl Type 3:
l Servo-Electronic Controller, Model SEC25, 120 Vdc, 800 W Max, Operating Temperature Ambient -40ºC to
+93ºC.
- Part Number 5003222-XXX

- Part Number 5003218-XXX (Power harness)
- Part Number 5003219-XXX (control harness)
l Electric Actuator, Model ACT 2100-XXXXP, 120 Vdc, 800 W Max, Operating Temperature Ambient -40ºC to
+150ºC.

Class I, Division 1, Groups B, C and D; T4; CSA Encl Type 3:
l Electric Actuator, Model ACT2000-XXXXP, 120 Vdc, 800 W Max, Operating Temperature Ambient -40°C to
+93°C.
- Part Number 5002300-X
- Part Number 5002600-X.
l Electric Actuator, Model ACT2000-XXXXF, 120 Vdc, 800 W Max, Operating Temperature Ambient -40ºC to
+93ºC.
l "High Force" Fuel Metering Valve, Model HFG 2.0 - XXXX, 120 Vdc, 800 W Max, Operating Temperature
Ambient -40ºC to +93ºC.
-Part Number 5002400-X (Aluminum)
-Part Number 5002415-X (Stainless Steel).
-Part Number 5002610-X (Stainless Steel)
-Part Number 5002447-X (Stainless Steel or Aluminum)
l "Component Assembly", FMV 24V SMT pcb for use as an alternate pcb in CSA Certified Precision Engine
Control Fuel Metering Valves as listed below.
The following products are approved to use either the 5001814-001 (through hole) PCB or the 5002359-001 SMT
PCB. The two models are electrically identical. The only difference is in the construction where one utilizes
through hole and the other uses surface mount technology.
Product P/N Certificate Class, Div, Group

VG-1.5 5000812-x 1105081 Class I, Division 1, Groups B, C and D
5001584-x (LR 43366-1)
5001945-x
5001998-x
VL Series 5002006-x 1105081 Class I, Division 1, Groups B, C and D
5002421-x (LR 43366-1)
Page 3 of 3
5002220-x
5002433-x
VL Series 5002007-x 1105081 Class I, Division 2, Groups A, B, C and D
5002450-x (LR 43366-1)
VG2.0 71800317-x LR 43366-2 Class I, Group D
5001892-x
VL10000EP LR 43366-4 Class I, Group D
Class I, Division 1, Groups B, C and D; T4 (Tamb = -40°C to +93°C); CSA Encl Type 4:
l Fuel Metering Valve, Model XVG and eXVG,16-32 Vdc, 70 W max,

- Part Number 5002800-00X (Aluminum), 5003130-00X (Stainless Steel) - Basic Valve
- Part Number 5002801-00X (Aluminum), 5003131-00X (Stainless Steel) - Basic Valve with transducers
- Part Number 5002802-00X (Aluminum), 5003132-00X (Stainless Steel) - Same as 2801/3131 with additional
electronics.
/gp
Page 1 of 3
CUSTOMER CLASS FILE
Precision Engine Controls Corporation 3228-81 043366_0_000

VALVES-For Hazardous Locations -
11661 Sorrento Valley Rd,
San Diego
CA
92121-1083
l Liquid Fuel Metering Valve for Gas Turbines, Model VL10000EP Series, rated 30V dc max, 25W max; Temp
Code T4, for use in 93°C max ambient.
Note: Suffix numbers to the "VL" designation denote fuel flow in pounds per hour. Valve is calibrated for suffix
numbers ranging from 8000 to 24000 inclusive.
l Fuel Metering Valve for Gas Turbines, Model VG-1.5; rated 30 Vdc max, 25 W max.
Class I, Division 2, Groups A, B, C and D
l Servo-Electronic Controller, Model SEC25, 120 Vdc, 800 W Max, Operating Temperature Ambient -40ºC to
+93ºC.
Page 2 of 3
l Electric Actuator, Model ACT 2100-XXXXP, 120 Vdc, 800 W Max, Operating Temperature Ambient -40ºC to
+150ºC.
Class I, Division 1, Groups B, C and D; T4; CSA Encl Type 3:
l Electric Actuator, Model ACT2000-XXXXP, 120 Vdc, 800 W Max, Operating Temperature Ambient -40°C to
+93°C.
l Electric Actuator, Model ACT2000-XXXXF, 120 Vdc, 800 W Max, Operating Temperature Ambient -40ºC to
+93ºC.
l "High Force" Fuel Metering Valve, Model HFG 2.0 - XXXX, 120 Vdc, 800 W Max, Operating Temperature
Ambient -40ºC to +93ºC.
-Part Number 5002415-X (Stainless Steel).
-Part Number 5002610-X (Stainless Steel)
-Part Number 5002447-X (Stainless Steel or Aluminum)
l "Component Assembly", FMV 24V SMT pcb for use as an alternate pcb in CSA Certified Precision Engine
Control Fuel Metering Valves as listed below.
The following products are approved to use either the 5001814-001 (through hole) PCB or the 5002359-001 SMT
PCB. The two models are electrically identical. The only difference is in the construction where one utilizes
through hole and the other uses surface mount technology.
Product P/N Certificate Class, Div, Group

VG-1.5 5000812-x 1105081 Class I, Division 1, Groups B, C and D
5001584-x (LR 43366-1)
5001945-x
5001998-x
VL Series 5002006-x 1105081 Class I, Division 1, Groups B, C and D
5002421-x (LR 43366-1)
5002220-x
5002433-x
VL Series 5002007-x 1105081 Class I, Division 2, Groups A, B, C and
5002450-x (LR 43366-1) D
VG2.0 71800317-x LR 43366-2 Class I, Group D
5001892-x
VL10000EP LR 43366-4 Class I, Group D
Page 3 of 3
Class I, Division 1, Groups B, C and D; T4 (Tamb = -40°C to +93°C); CSA Encl Type 4:
l Fuel Metering Valve, Model XVG and eXVG, 16 – 32 Vdc, 70 W max,

- Part Number 5002800-00X (Aluminum), 5003130-00X (Stainless Steel) - Basic Valve
- Part Number 5002801-00X (Aluminum), 5003131-00X (Stainless Steel) - Basic Valve with transducers
- Part Number 5002802-00X (Aluminum), 5003132-00X (Stainless Steel) - Same as 2801/3131 with additional
electronics.
/gp
Page 1 of 1
CUSTOMER CLASS FILE
Dwyer Instruments, Inc. 3238-01 042749_0_000

SWITCHES-Automatic - Pressure Type - For
102 Indiana Hwy 212
Hazardous Locations
Michigan City
IN
46361
Class I, Groups C and D; Class II, Groups E, F and G; Class III:
l Pressure-operated switches, Cat Nos 1950 (weatherproof Encl. 3), 1951 and 1952, with suffixes*, rated 10A or 15A, 125, 250 or
480V ac, 1/8 hp, 125V ac, 1/4 hp, 250V ac, or 1A, 125V ac.
*Suffix numbers and letters are added to the catalogue designation to indicate pressure range, switch type, and minor mechanical
features.
Class I, Groups B, C and D; Class II, Groups E, F and G; Class III:
l Pressure operated switches Cat No 1950G, with input rating of 12Vdc/ 1.1 W; 24Vdc/ 3W; 24Vac/ 6W; 120Vac/ 4W; 240Vac/
11W; with suffixes indicating pressure ranges, switch type and relay contact electrical ratings.
/ka
Page 1 of 1
CUSTOMER CLASS FILE
Thin-Lite Corporation 3429-01 038177_0_000

FIXTURES AND FITTINGS-Extra-low
530 Constitution Avenue, Potential Luminaires For Use in
Recreational
Camarillo
CA
93010
Vehicles
l Fluorescent, surface mounted, for rapid start lamps, Cat Nos 199, 179, for 1-6WT5 lamp; 101, 111, 141, *161,
171, 191, for 1-8WT5 lamp; 112, 130, *162, 172, 180, for 2-8WT5 lamps; 125, 173, for 1-13WT5 lamp, 126, 174,
for 2-13WT5 lamps; 103, 115, 143, 193, for 1-15WT8 lamp; 116, 134, 190, for 2-15WT8 lamps; 105, 145, 195 for
1-18WT8 lamp; 151, for 1-20WT12 lamp, 107, 147, 197, for 1-30WT8 lamp; 153, for 1-40WT12 lamp; 109, for
1-22W circline lamp; 110, for 1-32W circline lamp, P293 for 1-15W/T8 lamp; Cat Nos 941, 943, for 5-8 W lamp;
945, 947, 949, for PL7-13 W lamp; 951, for PL18 W lamp; 953 for PL24-30 W lampl 957, 958 or PL32-40 W
lamp.
l Fluorescent, recessed types, for rapid-start lamps, Cat Nos 711, for 1-8WT5 lamp; 712, 732, for 2-8WT5 lamps;
715, for 1-15WT8 lamp; 716, 736, for 2-15WT8 lamps; 713, for 1-20WT12 lamp; 714, for 2-20WT12 lamps; 717,
for 1-30WT8 lamp; 718, for 2-30WT8 lamps; Cat No 742, 2-8 W/T5 lamps; Cat No 746, 2-15 W/T8 lamps.
Notes:
1. *For wall mount only. Note: The above equipment is Certified for use in Recreational Vehicles where the
acceptability of the combination is to be determined by the Canadian Standards Association.
2. Prefix, suffix with Cat No may be provided for product category and customer code.
sr
http://directories.csa-international.org/xml_transform.asp?xml=certxml\038177_0_000-3429-01.xml&xsl... 12/20/2007
Page 1 of 3
CUSTOMER CLASS FILE
Solar Turbines Incorporated A Caterpillar

9098-01 035592_0_000
Company
9280 Skypark Court, MISCELLANEOUS-For Hazardous Locations
San Diego
CA
92123-5398
ACCESSORIES FOR USE ON SUBMITTOR'S SKID PACKAGES Class I, Division 2, Group D; Class IZone 2 IIA
l Hermetically Sealed Relays; P/N 981494C1, 918693C1 (Eaton 6042H162, 6042H166

l Relay; P/N 901352Cx (Guardian Series 3005
l Overspeed Switch; P/N 947045Cxx, 172809-x
l Velocity Vibration Transducer; P/N 120649-x, (CEC4-131
Class I Group D; Class I Zone 1 IIA
l Conduit Elbow; Fondisonzo ELF 8

l Detect-A-Fire; P/N 70-30104-x (Fenwall 27121-0, 27120-0
l Interconnection Harnesses; P/N 120176x, and 120177-x
l Linear Acutator; P/N 916151Cx (GL Collins P5301) 5 VRMS 1KHz
l Liquid Fuel Topping Solenoid; P/N 917718Cx (Liske Type L-4399A/L4399B
l Liquid Level Switches; P/N 120638-x, 915695Cx (Gems LS-800 Series Type 3); P/N 918192Cx (Gems LS-1950 Series); P/N
915274Cx (Gems LS-2050 series
l Relay; P/N 901353Cx (Guardian Series 3005
l Servo Actuator (H.R. Textron); P/N 221030-x, 916114Cx, 948001Cx, 948092Cx, 948415Cx, rated 75mA max 10 Vdc
l Servo Valve; P/N 916152Cx (MOOG 76 Series) rated 4 Vdc 40 mA.
l Speed Sensors; P/N 1006245-x, 1006953-x, 116523Cx, 136544-x, 190430Cx, 902750Cx, 913094Cx, 916180Cx; 70 V peak to
peak max Speed Sensors.
Intrinsically Safe Class I Group D Exia; Class I Zone 1 IIA;
l Phone Jack; for use with Intrinsically Safe Voice Powered Pones
l Servo Actuator; P/N 190508Cx, (MOOG) when connected to a Certified 28 V 300 Ohm Safety Barrier per Drwg 190508
l Velocity Vibration Transducer; P/N 120649-x (CEC 4-131) when connected to CSA Certified safety barriers MTL761 or Stahl
8901 per Instruction Drawing No 613771
Class I Group B, C, D; Class I Zone 2 IIB+Hydrogen
l 3 inch short radius elbows; Cortem ELF 8, and Elfit ELF 8.
Class I, Division 2, Group A, B, C and D;
l COAX Y-Tap Connectors, Allen-Bradley, Model numbers, 1786-TPR Series A and B; 1786-TPS Series A and B; 1786-TPYR
Series A and B; 1786-TYPS Series A and B; 9904-TPR Series A and B; 9904-TPS Series A and B; 9904-TPYR Series A and B;
9904-TPYS Series A and B.
l Solar 1020458-3, 1020458-4 Isothermal thermocouple reference PCB, 32 Volts max
Class I, Division 2, Groups B, C and D

Class I, Division 1, Groups B, C and D (sealed assemblies unless otherwise specified)
l Temperature Probe Assembly, Thermocouples, deemed suitable for installation in intrinsically safe or non-incendive systems as
simple devices:
P/N 1013027, type K P/N 1029426, type K P/N 186167-x, type K
Page 2 of 3
P/N 1018877, type N P/N 1030922, type K P/N 186439-x, type K

P/N 1023536-xxx, type K P/N 1033182-xxx, type N P/N 204358-201, type K
P/N 1015463-xxx, type K P/N 1033401, type K P/N 204468-201, type N
P/N 1024249-xxx, type N P/N 1038280-xxx, type N P/N 190027-x, type K
P/N 1025151-xxx, type N P/N 1038406-xxx, type N P/N 196101-xxx, type K
P/N 1025606, type N P/N 1039236-xxx, type N P/N 199358, type K
P/N 1026602, type K P/N 117979-xxx, type K (open tip) P/N 330360, type N
P/N 1027136, type K P/N 120739-xxx, type K P/N 948062Cx, type K (open tip)
P/N 1028046, type N P/N 128542-xxx, type K P/N 1060016, type N
P/N 1028047, type N P/N 136239-xxx, type K P/N 1060017, type N
P/N 1028222, type K P/N 172581-x, type K P/N 1060018, type N
P/N 1061971, type K P/N 1061972, type K P/N 1061973, type K
P/N 1064443, type N P/N 1064444, type N P/N 1064445, type N
P/N 1064446, type N P/N 1064692, type N P/N 1064694, type N
P/N 1065471, type K P/N 1065472, type K P/N 1065473, type K
P/N1065494, type K P/N 1066431, type K P/N 302493,type N
P/N 1065811, type K P/N 1065817, type N P/N 1066075, type K
P/N 1066076, type K P/N 1066077, type K P/N 1071905, type N
Class I, Division 2, Groups B, C and D

Class I, Division 1, Groups B, C and D (sealed and connected with rigid metal conduit and/or explosion proof flexible fitting)
l Temperature Probe Assembly, platinum RTD, P/N 916144Cx, P/N 120702 Type K Thermocouple, RTD P/N 1069160.
Ex d IIB, T6
Class I, Groups C & D; Temperature Code T6; Enclosure Type 4X
l Solar Model 200133-xxxx Industrial Gas Turbine Ignition System rated 10-32 Vdc input (26 Vdc Nominal at 2.5 A); 18 KV,
0.40A output. . Ambient temperature range –20º C to +70ºC. Temperature Code T6.
Model Number Nomenclature 200133-xxxx
Where xxxx = 1000 Aluminum enclosure 1061367-100 with 919340-C2 ignition cable
1100 Aluminum enclosure 1061367-100 with 120710-1-ignition cable
1200 Aluminum enclosure 1061367-100 with 945106-C2-ignition cable
1300 Steel enclosure 1061374-100 with 919340-C2-ignition cable
1400 Steel enclosure 1061374-100 with 120710-1-ignition cable
1500 Steel enclosure 1061374-100 with 945106-C2-ignition cable
Note: This equipment is certified as a component for use in the submitters certified equipment.
Page 3 of 3
Page 1 of 2
CUSTOMER CLASS FILE
TopWorx, Inc. 3218-06 024226_0_000

INDUSTRIAL CONTROL
3300 Fern Valley Rd, EQUIPMENT-Miscellaneous Apparatus -
Louisville
KY
40213
Class I, Groups A, B, C and D; Class II, Groups E, F and G; Class III:
l Proximity Switches, conduit connected, magnetic: Models 11 or 21, followed by 1, 3, 5, or 6, followed by 1, 2, or

7, followed by 1, 2, 3, 4, or 5, followed by 1, 2, 3, or 4, followed by 4, followed by Ax, Bx, Fx, Gx, Yx or Zx,
rated 1250W max, 120/240/480/600V ac heavy pilot duty; 24V dc, 3A.. Catalogue 30 series of proximity switches
including Model Series 31 and 33, followed by 1, followed by 3 or 7, followed by 5, followed by 1, 2 or 4,
followed by 4, followed by Ax, Bx, Fx, Yx, Zx, rated 500W, 120/240/480V ac heavy pilot duty.
l Proximity switches, conduit connected magnetic Models 71, 71M, 73, 73M, 75, 75M, 77, or 78, (with suffixes),
rated 240V ac, 2A; 24V dc, 0.5A; 120V, 5A (General Use); 24V dc, 4A (Res) Model 81, followed by 1 or 2,
followed by 0, followed by 1 or 5, followed by 2 or 4, followed by 4, followed by Ax, Bx, Fx, Gx, Yx or Zx, rated
1250W max, 120/240/480/600V ac heavy pilot duty; 24V dc, 3A.
l Proximity switches, conduit connected, Series 70, Models 7G, 7GM and 7I, rated 240V ac, 2A or 24V dc, 0.05A.
l Proximity Switches, conduit connected, magnetic, Models 73-13524, 73-13564-Hx (where x indicates the lead
length), rated 24V ac; 2A, 24V dc, 0.050A; 120V, 5A (General Use); 24V dc, 4A (res.), operating ambient 148°C,
Temperature Code T3C.
l Proximity switches, conduit connected, magnetic, Models 527-003-430, 527-003-431 and 527-007-081, rated 2A,
120/240V ac; 50mA, 24V dc (privately labelled for Lubriquip Inc.
Class I, Div. 2; Groups A, B, C and D, Class II, Groups E, F and G; Class III:
l Proximity Switches, conduit connected, magnetic: Models 11 or 21, followed by 1, 3, 5, or 6, followed by 1, 2, or

7, followed by 1, 2, 3, 4, or 5, followed by 1, 2, 3, or 4, followed by 0 or 6, followed by 00 or Ax, Bx, Fx, Gx, Yx
or Zx rated 1250W max, 120/240/480/600V ac heavy pilot duty; 24V dc, 3A. Catalogue 30 series of proximity
switches including Model Series 31, 32, 33 and 35, followed by 1, followed by 7, followed by 5, followed by 1, 2,
3 or 4, followed by 6, followed by Ax, Bx, Fx, Yx, Zx, rated 500W, 120/240/480/600V ac heavy pilot duty and an
additional rating of 24V dc, 3A (Res) for Series 35 (only). Models 71, 73, 75, 77, or 78, (with suffixes), rated
240V ac, 2A, 24V dc, 0.05A.
l Model 81, followed by 1 or 2, followed by 0, followed by 1 or 5, followed by 1, 2, 3 or 4, followed by 6, followed
by Ax, Bx, Fx, Gx, Yx or Zx, rated 1250W max, 120/240/480/600V ac heavy pilot duty; 24V dc, 3A.
l Model 31-17526-DP, conduit connected, rated 120V ac, 4A; 24V dc, 3A.
l Models 81-20516-DP, 81-20116-DP, conduit connected, rated 120V ac, 10A; 24V dc, 3A.
l Model PB4307.
Notes:
1. Switches have been tested for 100,000 operations, ac heavy pilot duty.
2. Unless the switches are provided with an acceptable grounding means, the switches are Certified as components
Page 2 of 2
only for use with other equipment, where the suitability of the combination shall be determined by CSA
International.
3. The switches are suitable for installation in (or through the wall of) a suitable enclosures with provision for
connection of rigid metal conduit, as acceptable to the local inspection authority having jurisdiction.
/vem
Page 1 of 4
CUSTOMER CLASS FILE
Reliance Electric Company Baldor

4228-01 019467_0_000
Dodge Reliance
6040 Ponders Crt,
Hazardous Locations
Greenville
SC
29615
Class I, Div. 1, and/or Div 2, Groups C, D; Class II, Div. 1 and/or Div 2, Groups E, F, G:
l Alternating current motors, squirrel cage, 2300V max a.c., 250 Hz max, fixed frequency, 0 to 120Hz variable
frequency, single or polyphase, Class A, B, F or H insulation, continuous or intermittent duty as follows:
Frame Size Alternate Frame Max HP

Designation
182-184T 180T 5
213-215T 210T 10
254-256T 250T 20
284-286T 280T 30
324-326T 320T 50
364-365T 360T 75
404-405T 400T 100
444-445T 440T 200
447-449T 440T 300
Notes:
1. The motor frame designation may have suffixes and prefixes added which identify mechanical construction
variations.
2. Also Class I, Group C and D and Class II, Groups E, F, G motors with CSA Certified or UL listed brakes. The
brakes in these explosion-proof and dust-ignition-proof assemblies are intended essentially for holding purposes
and may be used for stopping light inertia loads.
3. Motors are suitable for use with certified inverts; Type PWM, VSI, VVI or CSI.
4. Motors for use with inverter drives are suitable for continous duty only with Class B, F, or H insulation.
5. Alternate IEC Frame Designation to Nema Frame designation stated above are as follows:
Nema Frame Designation *IEC (+) Alternate Frame

Frame Designation
182T --- 180T
184T 112M 180T
213T --- 210T
Page 2 of 4
215T 132S, 132M 210T
254T --- 250T
256T 160M, 160L 250T
284T --- 280T
286T 180M, 180L 280T
324T --- 320T
326T 200M, 200L 320T
364T --- 360T
365T 225S, 225M 360T
404T --- 400T
405T 250S, 250M 400T
444T --- 440T
445T 280S, 280M 440T
447T 280K 440T
449T 280H 440T
(+) - IEC frames are identical to the NEMA frames except for mounting dimensions and may be marked with a kilowatt
rating corresponding to the NEMA horsepower rating such that HP (0.746) = KW.
l Alternating current, squirrel cage Induction Motors, Type "XE", rated 2300V ac max; Horsepower as tabulated
below; 2 or 4 pole, 1.0 Service Factor, single or polyphase. Class B, F or H insulation for Frames 320 through
365T; Class H insulation for Frame 405T, for use with Pulse Width Modulated (PWM) variable frequency drives.
Frame Size HP (max) Time Rating (Duty Cycle)

324T 60 30 min
326T 75 30 min
364T 100 30 min
365T 125 30 min
405T 150 30 min
Notes:
1. Variable Torque: 0-60Hz

2. Constant Horsepower: 60-143Hz.
3. These motors are provided with 160°C thermostats, for a nominal 115°C rise.
Class I, Div. 1 and/or Div 2, Groups C, D:
l Alternating current motors submersible in water and sewage, squirrel cage, 600V ac, 120Hz max fixed frequency,
0 to 120Hz variable frequency, single or polyphase, Class A, B, F or H insulation continuous or intermittent duty
as follows:
Frame Size Max HP

140TY 3
180TY 7.5
210TY 20
250TY 40
Page 3 of 4
320TY 75
360TY 135
440TY 460
Note: Motors are suitable for use with certified inverters, Types PWM, VSI, VVI or CSI, continous duty only with Class
B, for H insulation.
Class I, Div 1 and/or Div 2, Group D, Class II, Div 1 and/or Div 2, Groups E, F and G:
l Shaker duty motors, Frames 182T, 184T, 213T, 215T, 254T, 256T, 284T and 286T, 600V ac max, polyphase,
60Hz max fixed frequency, 0 to 120Hz variable frequency 15 hp max, 3600 rpm max Insulation Class B or F,
continuous or intermittent duty. Motor frame designation may have suffixes and prefixes added which identify
mechanical construction variations.
Class I, Div 2, Groups A, B, C, D; Class II, Div 2, Groups F and G; Class III, Div 2; Temperature Coded:
l AC Induction Motors; 50 or 60Hz, 1 or 3 Phase, Class B, F or H Insulation, rated as tabulated below:
Alternate
Type Max Max Temp. Frame IEC***
Designation Hp * Volt Code** Frame Size Design. Encl. Type Frame
CS, CH, P, PM, PR 7.5 1000 # 182-184T 180T A-E 112M

CS, CH, P, PM, PR 15 1000 # 213-215T 210T A-E 132S, 132M
P, PM, PR 25 1000 # 254-256T 250T A-E 160M, 160L
P, PM, PR 40 1000 # 284-286T 280T A-E 180M, 180L
P, PM, PR 60 1000 # 324-326T 320T A-E 200M, 200L
P, PM, PR 100 1000 # 364-365T 360T A-E 225S, 225M
P, PM, PR 150 1000 # 404-405T 400T A-E 250S, 250M
P, PM, PR 350 2300 # 444-445T 440T A-C, E 280S, 280M
P, PM, PR 300 2300 # 447-449T 440T D 280S, 280M
P, PM, PR 350 2300 T3C,T3,T2 447-449T 440T D 280S, 280M
P, PM, PR 400 2300 T3,T2 447-449T 440T D 280S, 280M
P, PM, PR 400 2300 T3C,T3,T2 L449 440T D 280S, 280M
P, PM, PR 450 2300 T3A,T3,T2 L449 440T D 280H
P, PM, PR 500 2300 T3,T2 L449 440T D 280H
PM, P, PR 600 2300 T3A or T3 447-4412T 440T A-E 280K, 280E
Notes:
1. ***IEC frames are identical to the NEMA frames except for mounting dimensions and may be marked with a
kilowatt rating corresponding to the NEMA horsepower rating.
2. # Temperature Code: T4, T3C, T3, T2.
3. *Motors may be marked in kW ratings instead o or in addition to horsepower.
4. ** T4 motors may alternatively be marked T3C - T2; T3C motors may alternatively be marked T3B - T2; T3
motors may alternatively be marked T2D - T2.
5. Enclosure Code:
A - DP Drip-proof
B - G Guarded
C- WP Weatherproof or Weather Protected
D - TEFC Totally-Enclosed Fan-Cooled
E - TFNV Totally-Enclosed Non-Ventilated
6. Enclosure Types: "Drip-proof" (DP), "Guarded" (G), and "Weatherproof" (WP) are suitable for Class I, Div 2,
Page 4 of 4
Groups A, B, C, and D only.
7. Frame size designation may be followed with suffix letter(s), to denote minor mechanical variations.
Class I, Div 2, Groups A, B, C, D; Class II, Div 2, Groups F and G; Class III, Div 2; Temperature Coded:
l AC Induction Motors, Single or three phases, for use with PWM Inverter Duty as tabulated below:
Temperature Code***
CHP 60- VT CT CT*
90 0-60 30-60 0-60
HZ HZ HZ HZ
P, PM, PR 182-184T 180T 112M 1000 5 T4 T4 T4 T3C
P, PM, PR 213-215T 210T 132S, 132M 1000 10 T4 T4 T4 T3C
P, PM, PR 254-256T 250T 160M, 160L 1000 20 T3C T3C T3C T3A
P, PM, PR 364-365T 360T 225S, 225M 1000 75 T3A T3A T3A T3A
P, PM, PR 447-449T 440T 280K, 280E 2300 300 T3A T3A T3A T3A
P, PM, PR L449-4412T 440T 280H 2300 450 T3 T3A T2D T2D
**IEC frames are identical to the NEMA frames except for mounting dimensions and may be marked with a
kilowatt rating corresponding to the NEMA horsepower rating.
*Slip Frequency to Base Speed
*** T4 motors may alternatively be marked T3C - T2; T3C motors may alternatively be marked T3B - T2;
T3 motors may alternatively be marked T2D - T2.
Notes:
1. Enclosure Type:
TEFC - Totally-Enclosed Fan-Cooled
2. Frame size designation may be followed with suffix letter(s), to denote minor mechanical variations.
3. PWM carrier frequency shall be 2 kHz or higher.
/ka
Page 1 of 2
CUSTOMER CLASS FILE

4228-01 006771_0_000
Dodge Reliance
6040 Ponders Crt,
Hazardous Locations
Greenville
SC
29615
Class I, Groups C and D; Class II, Groups E, F and G:
l Frames 48 and 56, 600V ac max, 25-120Hz, single or polyphase, 7200 rpm max; 3/4 hp max, 75C temperature
rise.
Class I, Groups C and D; Class II, Groups F and G:

Class I, Group D; Class II, Groups E, F and G:
Class I, Group D; Class II, Groups F and G:
l Frames 48 and 56; 600V ac max, 6-120Hz single or polyphase, 7200 rpm max: 3/4 hp max, 75C temperature rise.
l Frames 56, 61, 143, 145, 180, 182 and 184, 600V ac max 6-120Hz, single or polyphase, 7200 rpm max: 5 hp max,
75C temperature rise.
l Frame 56, 250V dc max, 3500 rpm max 1-1/2 hp max, 95C temperature rise.
1. Notes: Class I, Groups D and Class II, Groups E, F and G motors with brakes, The Type M disc brakes in
explosion-proof assemblies are intended essentially for holding purposes and may be used for stopping light inertia
loads. The Type D brakes which are induction type in the explosion-proof and dust-tight motor assemblies are
intended esentially for stopping light inertia loads.
2. Motors may be used with Variable Voltage Inverters (VVI), Current Source Inverters (CSI), and Pulse Width
Modulated Inverters (PWM) 3 hp max.
Class I, Group D:
l Frame 56 motors rated 115/230V ac, 1 ph, Class B insulation; Models E78V8415N (3/4 hp, 60Hz), E78V8416N
(1/2 hp, 60Hz) and E78V9473N (1/2 hp, 50Hz); for use with Timer Controller P.N. 79334-29-A. Timer is
intrinsically safe when connected to motor per Drawing D-14789. Temperature Code T3C.
Note: Timer is Certified as a component for installation in a suitable enclosure as acceptable to the Local Inspection
Authority having jurisdiction.
l Frame 56, 61, 143 or 145 motors, single phase, rated 115/230V ac, 60Hz, 80C temperature rise, horsepower rating
not to exceed 1 hp for 115V ac motors or 2 hp for 230V ac motors; for use with timer controller P/N 79334-29-B.
Timer is intrinsically safe when connected to motor per Drawing D-14789, Temp Code T3C. Note: Timer is
Certified, as a component, for installation in a suitable enclosure as acceptable to the local inspection authority
Page 2 of 2
l Frame 56, 61, 143 or 145 motors, single phase; rated 115/230V ac, 60Hz, 80C temperature rise, horsepower rating
not to exceed 1hp for 115V ac motors or 2 hp for 230V ac motors; for use with timer controller P/N 79334-32-A or
P/N 79334-32-D. Timer is intrinsically safe when connected to motor per Dwg D-14832. Temperature Code T3C.
Page 1 of 2
CUSTOMER CLASS FILE

4228-81 006771_0_000
Dodge Reliance
6040 Ponders Crt, Hazardous Locations - Certified to US
Standards
Greenville
SC
29615
Class I, Groups C and D; Class II, Groups E, F and G:
l Frames 48 and 56, 600V ac max, 25-120Hz, single or polyphase, 7200 rpm max; 3/4 hp max, 75C temperature
rise.
Class I, Groups C and D; Class II, Groups F and G:

Class I, Group D; Class II, Groups E, F and G:
l Frames 48 and 56; 600V ac max, 6-120Hz single or polyphase, 7200 rpm max: 3/4 hp max, 75C temperature rise.
l Frames 56, 61, 143, 145, 180, 182 and 184, 600V ac max 6-120Hz, single or polyphase, 7200 rpm max: 5 hp max,
75C temperature rise.
l Frame 56, 250V dc max, 3500 rpm max 1-1/2 hp max, 95C temperature rise.
Notes:
1. Class I, Groups D and Class II, Groups E, F and G motors with brakes, The Type M disc brakes in explosion-proof
assemblies are intended essentially for holding purposes and may be used for stopping light inertia loads. The
Type D brakes which are induction type in the explosion-proof and dust-tight motor assemblies are intended
esentially for stopping light inertia loads.
2. Motors may be used with Variable Voltage Inverters (VVI), Current Source Inverters (CSI), and Pulse Width
Modulated Inverters (PWM) 3 hp max.
Class I, Group D:
l Frame 56 motors rated 115/230V ac, 1 ph, Class B insulation; Models E78V8415N (3/4 hp, 60Hz), E78V8416N
(1/2 hp, 60Hz) and E78V9473N (1/2 hp, 50Hz); for use with Timer Controller P.N. 79334-29-A. Timer is
intrinsically safe when connected to motor per Drawing D-14789. Temperature Code T3C. Note: Timer is
Certified as a component for installation in a suitable enclosure as acceptable to the Local Inspection Authority
l Frame 56, 61, 143 or 145 motors, single phase, rated 115/230V ac, 60Hz, 80C temperature rise, horsepower rating
not to exceed 1 hp for 115V ac motors or 2 hp for 230V ac motors; for use with timer controller P/N 79334-29-B.
Timer is intrinsically safe when connected to motor per Drawing D-14789, Temp Code T3C.
Note: Timer is Certified, as a component, for installation in a suitable enclosure as acceptable to the local inspection
Page 2 of 2
authority having jurisdiction.
l Frame 56, 61, 143 or 145 motors, single phase; rated 115/230V ac, 60Hz, 80C temperature rise, horsepower rating
not to exceed 1hp for 115V ac motors or 2hp for 230V ac motors; for use with timer controller P/N 79334-32-A or
P/N 79334-32-D. Timer is intrinsically safe when connected to motor per Dwg D-14832. Temperature Code T3C.
NOIV.E189693 - Auxiliary Devices for Use in Hazardous Locations Page 1 of 1
NOIV.E189693
Auxiliary Devices for Use in Hazardous Locations
Page Bottom Print-friendly version Questions? Previous Page
Auxiliary Devices for Use in Hazardous Locations
Guide Information
SAIA-BURGESS MURTEN AG E189693

BAHNHOFSTRASSE 18
3280 MURTEN, SWITZERLAND
Timer modules.
Class I, Groups A, B, C and D, Division 2.
Models KOP118J7, -128J7, -141J7 , -160J7 followed by additional letters and/or number.
Models KOP511KMWVPN27, KOP512KMWVPN27, KOP560KMWVPN27.
LOOK FOR LISTING MARK ON PRODUCT
Page Top Notice of Disclaimer Questions? Previous Page

UL Listed and Classified UL Recognized Products Certified for
Products Components Canada
This page and all contents are Copyright © 2004 by Underwriters Laboratories Inc.®
The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed
and covered under UL's Follow-Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following
conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online
Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material.
In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2004 Underwriters
file://S:\ccerts\UL\CRT-E189693-EN.htm 12/16/2004
NOIV7.E189693 - Auxiliary Devices for Use in Hazardous Locations Certified for Canada Page 1 of 1
NOIV7.E189693
Auxiliary Devices for Use in Hazardous Locations Certified for
Canada
Page Bottom Print-friendly version Questions? Previous Page
Auxiliary Devices for Use in Hazardous Locations Certified for

Canada
Guide Information
SAIA-BURGESS MURTEN AG E189693

BAHNHOFSTRASSE 18
3280 MURTEN, SWITZERLAND
Class I, Groups A, B, C and D, Division 2.
Timer modulesModels KOP118J7, -128J7, -141J7 , -160J7 followed by additional letters and/or
number.
Models KOP511KMWVPN27, KOP512KMWVPN27, KOP560KMWVPN27.

UL Listed and Classified UL Recognized Products Certified for
Products Components Canada
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following
conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online
Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material.
In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2004 Underwriters
file://S:\ccerts\UL\showpage.htm 12/16/2004
VAPT.E37068 - Solenoids, For Use in Hazardous Locations Page 1 of 1
VAPT.E37068
Solenoids, For Use in Hazardous Locations
Page Bottom Questions? Previous Page
Solenoids, For Use in Hazardous Locations
Guide Information
VERSA PRODUCTS CO INC E37068

22 SPRING VALLEY RD
PARAMUS, NJ 07652 USA
Class I, Groups C and D; Class I, Div 2, Groups A, B, C and D ; Class II, Groups E, F and G.
UL Listed and Classified UL Recognized Products Certified

Products Components for Canada
UL permits the reproduction of the material contained on UL's Website subject to the following conditions: 1. The Guide
Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any
manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must
include a copyright notice in the following format: "Copyright © 2003 Underwriters Laboratories Inc.®"
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=VAPT.E37068&ccnshorttit
8/7/2003
Page 1 of 2
CUSTOMER CLASS FILE
Kato Engineering 4228-01 009868_S_000

Quality Department, PO Box 8447
Hazardous Locations
Mankato
MN
56002-8447
l Synchronous generators, Type Coded xPy-z, Rated, 13800V max, 3 phases, 50 and/or 60 Hz , 6000
kVA max (TEAAC machines); 11250 kVA max (ODP machines); 8125 kVA max (WPII machines);
temperature rise B and/or F, class F insulated, maximum output per frame as given below versus
generator enclosure type:
Maximum Output (kVA) at 60Hz (See Notes 1 and 2)
Open Drip Proof For 40ºC TEAWC TEAAC

Maxi Cooling Air (See
Note 2)
4P7 -- -- -- 1750
4P8.1/6.6 -- -- -- --
4P9.1/9.6 -- -- -- --
4P10.7 7875 -- -- --
4P11/12 8500 -- -- 6000
4P63 11250 8125 -- --
4P63.5 -- -- -- --
Note 1: The maximum outputs are giving for 60Hz application - Multiply by 0.875 for 50Hz maximum output at 40°C
ambient air
Note 2: For a cooling air above 40°C, de-rate (Multiply) the output by 0.94 for a cooling air less or equal to 45°C, and
de-rate by 0.89 for a cooling air between 45°C and 50°C.
Ex nA II A & II B + H2, T3 :
l Synchronous generators, Type Code xPy-z; Rated, 13800V max, 3 phases, 50 and/or 60 Hz , 8125
kVA max (ODP & WPII machines); temperature rise B and/or F, class F insulated, maximum output
per frame as given below versus generator enclosure type:
http://directories.csa-international.org/xml_transform.asp?xml=certxml\009868_S_000-4228-01.xml&xsl=... 2/19/2008
Page 2 of 2
Maximum Output (kVA) at 60Hz (See Note 1)
Code Open Drip Proof For 40°C WP2 TEAWC TEAAC

Note 2)
4P7 -- -- -- --
4P8.1/6.6 -- -- -- --
4P9.1/9.6 -- -- -- --
4P10.7 -- -- -- --
4P11/12 -- -- -- --
4P63 8125 8125 -- --
4P63.5 -- -- -- --
ambient air
/mer
Page 1 of 2
CUSTOMER CLASS FILE
Kato Engineering 4228-81 009868_S_000

Quality Department, PO Box 8447 Hazardous Locations - Certified to US
Standards
Mankato
MN
56002-8447
l Synchronous generators, Type Coded xPy-z, Rated, 13800V max, 3 phases, 50 and/or 60 Hz , 6000
kVA max (TEAAC machines); 11250 kVA max (ODP machines); 8125 kVA max (WPII machines);
temperature rise B and/or F, class F insulated, maximum output per frame as given below versus
generator enclosure type:
Maximum Output (kVA) at 60Hz (See Notes 1 and 2)
Open Drip Proof For 40ºC WP2 TEAWC TEAAC

Note 2)
4P7 -- -- -- 1750
4P8.1/6.6 -- -- -- --
4P9.1/9.6 -- -- -- --
4P10.7 7875 -- -- --
4P11/12 8500 -- -- 6000
4P63 11250 8125 -- --
4P63.5 -- -- -- --
ambient air
Class I, Zone 2, AEx nA II A & II B + H2, T3 :
l Synchronous generators, Type Code xPy-z; Rated, 13800V max, 3 phases, 50 and/or 60 Hz , 8125
kVA max (ODP & WPII machines); temperature rise B and/or F, class F insulated, maximum output
per frame as given below versus generator enclosure type:
Page 2 of 2
Maximum Output (kVA) at 60Hz (See Note 1)
Code Open Drip Proof For 40°C WP2 TEAWC TEAAC

Note 2)
4P7 -- -- -- --
4P8.1/6.6 -- -- -- --
4P9.1/9.6 -- -- -- --
4P10.7 -- -- -- --
4P11/12 -- -- -- --
4P63 8125 8125 -- --
4P63.5 -- -- -- --
ambient air
/mer
Page 1 of 2
CUSTOMER CLASS FILE
ITT Aerospace Controls A Unit of ITT

6248-01 034146_0_000
Industries
SWITCHES-Snap - For Hazardous
28150 Industry Dr.,
Locations
Valencia
CA
91355
Class I, Groups A, B, C and D; Class II, Groups E, F and G:
l Snap switch, Cat No 057-0030, 057-0690 and 057-0696, spdt; and 057-0057, 057-0691 and 057-0697, dpdt; all
rated 11A, 1/4 hp, 125 or 250V ac; 3A inductive or 5A resistive, 28V dc max, 0.5A, 125V dc, leads factory sealed.
l Snap switch, Cat Nos. 057-0130, 057-0692 and 057-0698, spdt; and 057-0157, 057-0693 and 057-0699, dpdt; all
rated 1A, 125 or 250V ac; 0.5A inductive or 1.0A resistive, leads factory sealed.
Class I, Groups A, B, C and D; Class II, Groups E, F and G
l Snap Switches,
Cat. No. 057-0760, spdt, 11 A, 0.25hp, 125/250 V, 60Hz; 5 A resistive at 30 Vdc; 0.5 A resistive at 125 Vdc
Cat. No. 057-0761, dpdt, 11 A, 0.25hp, 125/250 V, 60Hz; 5 A resistive at 30 Vdc; 0.5 A resistive at 125 Vdc
Cat. No. 057-0762, spst, 1 A, 125 V, 60Hz.; 1 A resistive, 0.5 A inductive, 30 Vdc
Cat. No. 057-0763, dpdt, 1 A, 125 V, 60Hz.; 1 A resistive, 0.5 A inductive, 30 Vdc
Cat. No. 057-0770, spdt, 11 A, 0.25hp, 125/250 V, 60Hz; 5 A resistive at 30 Vdc; 0.5 A resistive at 125 Vdc
Cat. No. 057-0771, dpdt, 11 A, 0.25hp, 125/250 V, 60Hz; 5 A resistive at 30 Vdc; 0.5 A resistive at 125 Vdc
Cat. No. 057-0772, spdt, 1 A, 125 V, 60Hz.; 1 A resistive, 0.5 A inductive, 30 Vdc
Cat. No. 057-0773, dpdt, 1 A, 125 V, 60Hz.; 1 A resistive, 0.5 A inductive, 30 Vdc.
Class I, Division 2, Groups A, B, C, and D, Class II, Groups E, F, and G, Class III
l Snap Switch
Cat. No. 057-0826, dpdt, 1 A, 125V, 60Hz.; 1 A resistive, 0.5 A inductive, 30 Vdc.
Note: The grounding of the metal body of Cat. No. 057-0826 is to be evaluated in the final installation by the inspection
authority having jurisdiction.
Class I, Groups B, C, D; Class II, Groups E, F, G; Class III; Encl. Type 4X and 13:
l Model 801EP Series Pressure Switches.

Input rated: 115 or 230V ac, 50/60Hz or 18-32V dc;
Output: Solid State Relay - 240V ac, 350V dc, 120mA, or Electromechanical Relay - 125/277V ac, 6A, 30V dc,
5A; Optional analog output: 4-20mA.
Max operating pressure: From 12.5 psi to 6000 psi. Maximum ambient: 60C.
Class I, Groups C, D; Class II, Groups E, F, G; Class III
Page 2 of 2
l Series 100P Explosion proof Pressure Switches, adjustable, 100P-xxxxxxx; Enclosure Type: 4X, 13; Relay
contacts rated: (i) 15A, 125/250/480Vac; 0.5A, 125 Vdc (ii) 11A, 125/250Vac; 0.5A, 125V dc (iii) 15A,
125/250/480Vac; 1A, 125 Vdc (iv) 1A, 125Vac. Maximum operating ambient: 75C. Max operating pressure:
3000 psi for all ranges except range one which is 600 psi.
Class I, Div. 2, Groups A, B, C, D: Class II, Div. 2, Groups E, F, G; Class III
l 100P, 110P and 160P Series pressure switches, rated 11A, 1/4 hp, 125/250Vac; 5A, 125/250 Vac, 5A resistive, 3A
inductive, 28Vdc; 0.5A resistive, 125V dc; "M" option: 1A resistive, 0.5A inductive, 125Vac. Temperature Code:
T4, max ambient temp: 74°C.
l 200P Series Pressure Switches, rated 11A, 1/4 hp, 125/ 250Vac; 5A, 125/250 Vac, 5A resistive, 3A inductive,
28Vdc; 5A resistive, 125Vdc; "M" option: 1A resistive, 0.5A inductive, 125Vac. Temperature Code: T4, max
ambient: 74C°; Encl. Type: 4X, 13.
/ka
Page 1 of 1
CUSTOMER CLASS FILE
ITT Aerospace Controls A Unit of ITT

4658-01 034146_0_000
Industries
SWITCHES-Miscellaneous - For
28150 Industry Dr.,
Hazardous Locations
Valencia
CA
91355
Class I, Groups B, C, D; Class II, Groups E, F, G; Class III; Enclosure Type 4X and 13.
l Model 801ET Series Temperature Switches.

Input Rated:115 or 230V ac, 50/60Hz or 18-32V dc;
Output: Solid State Relay - 240V ac, 350V dc, 120mA max, or Electromechanical Relay - 125/277V ac, 6A, 30V
dc, 5A; Optional Analog
Operating ambient : - 26°C to 60°C
/mg
% &'( ) * + , -./
0 1
# 2 # # & !
! " %34567
865 % " 9' 9:%
%; 0 <: +% % =>353? &#9
# $ %& '( ) *"
9@A - - >7 8 ? 67> 8> B
3- - A
- 6 3- - 5
9@3 - - A > 67> 8> B
- > 8- - 5
9@4 - - >? >3 >4 7 67> 8> B
6 66 88 85 2 +
- 8- - 5
; 76? !73 ? 6>- 8> B
633C'C
# ! " +,!* " &" -(& "
9@A - > 7 8 87 - B >>D
3 - A
- 6 3 - 5
9@3 - A 77 -
6 B 8D B
- > 8 - 5
9@4 - >? >3 >4 >7 - B 8D 6,
6 66 88 85 - >8/
- 8 - 5
; 76? !73 77 - B 8D 6
!" #
! $!
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=... 11/11/2008
' & 557!>8! 3
) I + 0 "
E 6>>4& ' F
" (
&'( * !& # < &' '
&'( * !& # 9
&' < + G "

2 + - ' , / !
, /6 " C < +
& ' C G H
C E 6>>4& ' FC
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=... 11/11/2008
SECTION: 10.03
QC DATA BOOK REVIEW BY ABS
PACKAGE ABS CERTIFICATE

3c841 Bumi Unit 1

Uploaded by

Copyright:

Available Formats

3c841 Bumi Unit 1

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3c841 Bumi Unit 1

Uploaded by

Copyright:

Available Formats

QUALITY ASSURANCE DATA BOOK

BUMI, PD# 3C841

TECHNICAL MANUAL OVERVIEW

BUMI, PD# 3C841

01.06 LUBE OIL COOLER

01.06 LUBE OIL COOLER

01.06 LUBE OIL COOLER

01.06 LUBE OIL COOLER

01.07 LUBE OIL FILTERS

01.12 PACKAGE LIFTING KIT

01.12 PACKAGE LIFTING KIT

01.13 INTERNAL EQUIPMENT HANDLING SYSTEM

01.13 INTERNAL EQUIPMENT HANDLING SYSTEM

02.01 REVIEW WELDING PROCEDURES

02.02 REVIEW WELDER QUALIFICATIONS

02.03 SKID FABRICATION

02.04 LUBE OIL TANK - PNEUMATIC LEAK TEST

02.05 SKID SURFACE PREPARATION AND PAINT

02.06 LUBE OIL TANK - INTERNAL COATING

03.05 MANIFOLD RADIOGRAPHY

03.06 HYDROSTATIC PRESSURE TEST OF MANIFOLDS

04.01 VISUAL INSPECTION OF CONTROL CONSOLE WIRING

04.02 CONTROL SYSTEM HARDWARE VERIFICATION

04.03 CONTROL SYSTEM SOFTWARE VERIFICATION

05.03.A COMPRESSOR CASE LEAK TEST

05.03.B COMBUSTOR CASE LEAK TEST

05.03.C ENGINE FUEL MANIFOLD HYDROSTATIC TEST

05.03.C ENGINE FUEL MANIFOLD HYDROSTATIC TEST

05.04 ROTOR ASSEMBLY - COMPRESSOR AND TURBINE

05.04.A GAS PRODUCER COMPRESSOR ROTOR

05.04.B GAS PRODUCER TURBINE ROTOR

05.04.D BALANCE GAS PRODUCER COMPRESSOR ROTOR

05.04.E BALANCE GAS PRODUCER TURBINE ROTOR

05.06 GEAR BOX

05.07 ENGINE PERFORMANCE TEST

06.00 THIS SECTION DOES NOT APPLY

07.05 DIMENSIONAL CHECK

08.01 PACKAGE/CONSOLE ACCEPTANCE TEST

08.02 ENCLOSURE ASSEMBLY STATIC TEST

09.00 PACKAGE FINAL INSPECTION

10.01 QC DATA BOOK REVIEW

10.01 QC DATA BOOK REVIEW

10.02 ELECTRICAL DEVICE LIST

10.02 ELECTRICAL DEVICE LIST

10.03 QC DATA BOOK REVIEW BY ABS

LUBE OIL COOLER

1. PRESSURE TEST AND FLUSH CERTIFICATE

LUBE OIL COOLER

2. ELECTRICAL DEVICE LIST

Vibration Switch Vibration switch

2-- Hayden Model TTP-448

LUBE OIL COOLER

3. ELECTRICAL DEVICE CERTIFICATES

LUBE OIL COOLER

LUBE OIL FILTERS

ASME DATA REPORT

Vertical 63910 N/A 1903826 8122 2008

6. Shell: SA-414-G .097 0 8.625" (ID) 2' 3.500"

7. Seams: Type 1 None 65% N/A N/A Type 1 None 65% 1

8. Heads: (a) Material SA-516-70 (b) Material SA-516-70