Fleet Maintenance

your fleet is on the move. so are you.
From trucks to lifters to haulers to movers to almost any vehicle on or off the road, you keep it all
working well. Proto® keeps your equipment running well by providing a full line of equipment for Power
Trains, Fluid Systems, Electrical System, Chassis, and Support Systems. This includes automotive
speciality items like feeler gauges, compression testers, gasket scrapers, and ignition wrenches. Not
to mention pullers and extrators of all kinds. We can even keep your shop moving smooth with covers,
sliders, and boxes used to keep the work clean and organized. Proto tools are engineered to meet or
exceed various government, ASME, and aerospace specificatons.
814
Fleet
Maintenance
Diagnostic Smoke Machine
815
eVaP-aPProVed SMoke Machine
Fleet Maintenance
> Patented UltraTraceUV™ the only OEM-approved dye.

> Auto shut-off.
> Auto-correct EVAP pressure.
> Works with nitrogen or shop air to meet all OEM
test requirements for all makes and models.
> Easy, effective, versatile tool to help technicians diagnose EVAP
trouble codes on domestic and import cars and light trucks.
> Uses patented UltraTraceUV™ technology —
the only OEM-approved dye available.
> Works with nitrogen or shop air to meet all OEM test requirements.
Overall Weight
Product # Voltage Width (in) Length (in) (lbs)
JFP521 12V 12-1/2 18 26.89
diagnoStic SMoke Machine

> Full featured diagnostic capabilities.
> Compact and simple to use.
> EVAP approved.
> Works with shop air and uses mineral oil.
Overall Weight
Product # Voltage Width (in) Length (in) (lbs)
JFP9510 12V 7 12 12.86
diFFerential cylinder PreSSure teSter

Powertrain
Product #: JFP210M
> Locates internal engine problems such as bad
rings, valves, and leaking head gaskets.
> Includes adapters for most applications
(10 mm, 12 mm, and 18 mm).
> Rugged blow-molded case.
> Weight (lbs): 4.02
14 Piece tranSMiSSion/oil teSter PreSSure kit

> Professional kit for domestic and foreign applications.
> High and low pressure gauges for transmission and engine work.
> Complete with adapters for most applications and is designed for static or road testing.
> Includes:
> M8 x 1.0 to 1/8" npt adapter
> 1/8" npt x 2" male adapter
> 1/4" npt male x 1/8" npt male
> 1/8" npt female
> 1/4" npt male/female
> 3/8" npt male x 1/8" female
> 1/8" npt male x 1/8" female
> 1/16-27" nptf x 1/8-27" adapter
Product # Graduation Weight (lbs)

1 pound and 5 pound
JFP460M 5.23
increment gauges
816 WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES. +1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
7 Piece coMPreSSion teSter Set
Fleet Maintenance
Product #: JFP70
> Complete compression testing on gasoline

engines including domestic, foreign,
motorcycle, marine, and small engines.
> Corrosion resistant nickel plated finish
adapters for flat and tapered seat plugs.
> Professional quality gauge with zero adjust.
> 2-1/2" gauge features chrome bezel and
rugged protective outer boot.
> Extra long 25" flex hose gauge assembly
with quick coupler, allows for easy viewing
out of cluttered engine compartment.
> Dual scale gauge reads 0-300 PSI and 0-2100 kg/cm².
> Rugged blow-molded case with removable lid.
> Includes:
> 12" flex-14 mm standard reach hose
> 12" flex-14 mm long reach hose
> 10 mm, 12 mm, and 18 mm thread adapters
> Repair kit
25 Piece deluxe coMPreSSion teSt kit

Product #: JFP155
> Complete package for compression

testing on gasoline engines.
> Complete kit includes standard and specialty
Powertrain
adapters, including the deep well connector used
on recessed plug well style heads and the Ford
Triton™ engine adapter using 16 mm thread plugs.
> Includes: 14 mm deep well extension,
12 mm adapter, 18 mm adapter, and
16 mm compression tester adapters.
> Dual scale gauge reads 0-300 PSI and 0-2100 kg/cm².
15 Piece dieSel coMPreSSion teSter

Product #: JFP97315
> 2-1/2" dial, glycerine-filled gauge with
glass lens in stainless steel housing.
> 4,500 PSI rated nylon jacketed
pressure hose assembly.
> Dual scale - 0-1,000 PSI; Metric scale - 0-70 bar.
> Includes 13 piece adapter set (Deere
and BMW adapters included).
> Easy to read identification marked on case and parts.
caMShaFt Bearing tool

> Removes or inserts camshaft bearings in most
engines from compact cars to heavy trucks.
> No problems with slightly undersize
or oversize bearings.
> Range of 1-1/8" to 2-19/32" (28.58 mm - 68.3 mm).
Overall Length Weight
Product # Opening Range (in) (in) (lbs)
JFP18A 1-1/8 to 2-19/32 30-19/64 16.51
Made in USA accurate at time of printing, consult www.protoindustrial.com for updated information.
Made in USA Made in USA with global components
817
VacuuM Fuel PreSSure Set
Fleet Maintenance
> Ideal for testing vacuum lines and components -

quickly diagnose internal engine problems such as
bad rings, valves, and leaking head gaskets.
> Accurately tests low-pressure fuel systems.
> Helps pinpoint hard-to-find problems such as cracked
lines, PCV, fuel pump, fuel filters, and more.
> Professional dual scale gauge reads vacuum and pressure
0-30" Hg vac and 0-70 cm Hg, also reads 0-15 PSI
and 0-100 KPA and offers zero adjust feature.
> Gauge has a large 3-1/2" face featuring a chrome bezel.
> Gauge is protected with a rugged outer boot.
> Built-in rear hook allows gauge to be hung at eye level.

JFP3000 1 pound increment gauge 2.43
19 Piece BaSic Fuel injection teSt kit

> For testing the fuel injection systems on most domestic
(except GM TBI) and Japanese cars with Schrader type ports.
> Includes 3-1/2" gauge with a range of 0-145 PSI/0-1000 KPA.
> All adapters, gauge heads and hose assemblies
feature a quick coupling system.
> Includes adapters to service many domestic,
Japanese, and Marine applications.
Powertrain

1 pound and 5 pound
JFP810B 3.46
increment gauges
51 Piece Fuel injection teSt kit

> For testing the fuel injection systems on most domestic
and foreign cars with Schrader type ports.
> Includes two gauges:
> Large 3-1/2" gauge with a range of 0-145 PSI/0-1000 KPA
> Medium 2-1/2" gauge with a range of 0-15 PSI/0-100 KPA
> All adapters, gauge heads, and hose assemblies
feature a quick coupling system.
> Comes complete with rubber protectors for gauges, instructions, and
adapters that will fit most domestic and foreign vehicle systems.
1 pound and 5 pound
JFP1200MS 11.86
increment gauges
7 Piece PneuMatic Fan clutch Wrench Set

Product #: JFP100
> Removes and installs fan clutch when repairing the water pump or fan clutch.
> Use with air hammer.
> Includes seven driving wrenches that fit Ford, GM, Chrysler, and Jeep. Sizes
include: 7/8", 32 mm, 36 mm, 40 mm thin, 1-7/8", 2", and 47 mm.
Overall Length (in) Weight (lbs)

18 8.03
coMPreSSion teSterS
Fleet Maintenance
> Includes compression gauge, O-ring, and instructional pamphlet.
> JCTR10 includes:
> Flexible hose and quick-disconnect coupler permit fast,
easy engagement of threaded fitting into spark plug hole.
> Gauge has convenient side release valve and dual reading scale
for both PSI and metric values (0 to 300 PSI, 0 to 20 kg/cm²).
> Equipped with neoprene “O" rings for positive finger-tight seal.
> Includes adapters for regular 18 mm spark plugs
and for regular and long 14 mm spark plugs.
Overall Length
Product # (in) Weight (lbs) Repair Kit
JCTR10 10-29/32 1.08 JCTR10RK
JCTR20 11-29/32 1.08 JCTR20RK
coMPreSSion gauge PartS

Product # (in) Use With (lbs)
JCTG1 3-1/2 JCT21, JCTR10 0.39
JCT21RK 7-3/16 JCT21 0.29
JCTR10-7A 7/16 JCTR10 0.01
JCTR10RK 22-5/16 JCTR10 0.80
JCTR20-4C 2-5/16 JCTR20 0.35
Powertrain
JCTR20RK 9-1/2 JCTR20 0.48
MaSter SerPentine Belt tool

> Spring-loaded idler pulley releases
tension on serpentine belts.
> Use to remove and install belts on serpentine belt systems.
> Fits idler pulleys requiring 13 mm, 14 mm,
15 mm, 16 mm, 18 mm, 19 mm, hex, and
both 3/8" and 1/2" square drive sizes.
> For applications with limited access; 13 mm and
16 mm, and 19 mm sockets are built into the handle.
> Covers most domestic and some foreign applications.
> Comes with extension for hard-to-reach idler pulleys.
> Eight low profile sockets and extensions
help to fit into tight places.
Width Height Overall Length Weight
Product # (in) (in) (in) (lbs)
JFP59800 2-1/2 2-13/64 24-13/32 2.36
adjuStaBle Pin SPanner Wrench

> Universal design fits many different types of pulleys having
slots or holes, including camshaft and crankshaft pulleys.
> Wrench is adjustable from 1-1/4" to 5".
> Works with a 1/2" ratchet or breaker bar.
Opening Range Overall Length Weight

Product # (in) (in) (lbs)
JFP661 1-1/4 to 5 20-29/32 2.63
819
5 Piece caM claMP Set
Fleet Maintenance
> Master kit contains a dual Cam-Clamp

and four Cam-Clamp singles.
> Use on single, dual, or quad overhead cam engines
to hold valve timing during belt replacement.
> Kit provides coverage for all timing belt applications.
> Single Cam-Clamps lock gears individually.
> Miniature design is easy to use; installs in seconds.
Width Height Overall Length Weight
JFP70900 13-1/2 2-3/4 17-1/4 0.78
large ValVe SPring coMPreSSor

> Designed to compress valve springs
on overhead valve engines.
> Direct action compressor lever provides high visibility of
valve spring retainers located in difficult access areas.
> Includes two valve spring adapters, which fit valve spring
retainers up to 1" (25 mm) and 1-3/16" (30 mm).
> Jaw opening of 1-3/8" to 5-5/8" (35 mm to 142 mm).
> Throat clearance of 5-7/8" (150 mm).
Product # Jaw Opening (in) Width (in) Height (in) Overall Length (in) Weight (lbs)
JFP572 5-5/8 8-19/64 1-7/16 16-51/64 5.27
Powertrain
17 Piece Flaring tool coMBination kit

Product #: JFP501
> Includes all adapters and tools necessary

for single and double flaring (standard and
metric) as well as the ISO (bubble) flare.
> Works on aluminum, copper, and soft steel.
> Not recommended for use on stainless steel.
Overall Length (in) Weight (lbs)

9-1/2 3.82
Budd Wheel deeP length iMPact SocketS

> Stamped size for easy reference.
> Side locking hole.
Size Drive Size Drive End Outside Diameter Nut End Outside Diameter Overall Length Weight
Product # (in) (in) (in) (in) (in) (lbs)
J07524-LS 1-1/2 3/4 1-5/8 2-1/4 4 3.12
J09924-LS 1-1/2 #5 Spline 2-3/8 2-3/8 4-3/16 3.10
J10024LS 1-1/2 1 2-3/8 2-3/8 4 2.96
3/8" driVe SPark Plug SocketS - 6 Point
Fleet Maintenance
> With rubber insert.
Product # Size (in) Drive Size (in) Nut End Outside Diameter (in) Overall Length (in) Weight (lbs)
J5020-50 5/8 3/8 3/16 2-1/2 0.21
J5026HPA 13/16 3/8 19/64 2-3/4 0.35
3/8" driVe uniVerSal SPark Plug SocketS - 6 Point

> With rubber insert.
Size Drive Size Drive End Outside Diameter Nut End Outside Diameter Nut Depth Overall Weight
Product # (in) (in) (in) (in) (in) Length (in) (lbs)
J5020-70A 5/8 3/8 23/32 27/32 5/16 3-19/64 0.26
J5026-50A 13/16 3/8 23/32 1-1/16 5/16 3-3/8 0.34
Powertrain
3/8" driVe extra deeP SPark Plug Socket
> Rubber retainer holds spark plug in place.
> Knurled for hand turning.
Product # Size (in) Size (mm) Drive Size (in) Point Size Overall Length (in) Weight (lbs)
JFED2032RD 5/8 15.9 3/8 6 4 0.71
9 Piece SPark Plug Set

> Includes three different sizes and three
different configurations most commonly
used when working with spark plugs.
> 9/16", 5/8", and 13/16" spark plug sockets in
standard, universal, and extra deep lengths.
> Chromed finish for easy clean-up and
long-lasting corrosion protection.
> 3/8" square drive sockets feature a rubber
insert to securely grab the spark plug.
> Each socket is knurled for easy hand turning.
Drive Size Point Overall Weight

Product # (in) Size Length (in) (lbs)
JFP9SET 3/8 6 12 5.50
821
9 Piece SPark Plug Set - Black
Fleet Maintenance
> Includes three different sizes and three

different configurations most commonly
used when working with spark plugs.
> 9/16", 5/8", and 13/16" spark plug sockets in
standard, universal, and extra deep lengths.
> Universal styles for most applications.
> 3/8" square drive sockets feature a rubber
insert to securely grab the spark plug.
> Each socket features a knurl for easy hand turning.
> Black-oxide finish.
Drive Size Point Overall Weight

Product # (in) Size Length (in) (lbs)
JFP9BSET 3/8 6 14 5.26
SPark Plug Boot PullerS

> Allows for easy access to the spark plug boot.
Bend Height Overall Weight

Product # Angle (in) Length (in) (lbs)
JFE600A 30° 1-19/32 15-13/32 0.89
Powertrain
JFE700A 40° 1-19/32 15-13/32 0.88
tailPiPe and exhauSt cut-oFF tool

> 15 mm diameter cutters.
> Cuts thick and thin walled pipe from 3/4" to
3-1/4" (19 mm to 83 mm) in diameter.
> 1/4 turn for complete cut.
> Cutting wheels on every pivot.
Capacity Overall Length Weight

JFP770 3-1/4 14-1/2 1.14
StethoScoPe
> Fast, accurate method for locating trouble in engines.
> Determines if moving parts are worn, such as pistons,
gears, valves, water pumps, gaskets, bearings, etc.
> Plastic ear protectors help reduce shop noise.
> Spring steel diaphragm for long use.
> Shock resistant handle.
Product # Height (in) (in) (lbs)
JFP500A 2-3/32 14-29/32 0.47
13 Piece ignition Set
Fleet Maintenance
Product #: J3200C
Contents Size (in) Overall Length (in) > Satin finish provides corrosion resistance and a slip-resistant grip.
J3210 13/64 x 15/64 3 > 15° and 60° angle heads combined with the same
opening size on both ends allows the wrench to
J3211 15/64 x 13/64 3 be used in four different turning angles.
J3215 7/32 x 1/4 3 > Standard open end wrench configuration.
J3216 1/4 x 7/32 3 > Weight (lbs): 0.67
J3220 9/32 x 5/16 3-1/2
J3221 5/16 x 9/32 3-1/2
J3225 11/32 x 3/8 3-3/4
J3226 3/8 x 11/32 3-3/4
J000D Ignition Feeler Gauge Set
J235 Ignition Pliers
J2302 Ignition Point File
J9853 Screw Start
66-101 Pocket Screwdriver
J25TR10C Tool Roll
9 Piece ignition Set

Product #: J3200D
Contents Size (in) Overall Length (in) > Satin finish provides corrosion resistance and a slip-resistant grip.
J3210 13/64 x 15/64 3 > 15° and 60° angle heads combined with the same
opening size on both ends allow the wrench to
J3211 15/64 x 13/64 3 be used in four different turning angles.
Powertrain
J3215 7/32 x 1/4 3 > Standard open end wrench configuration.
J3216 1/4 x 7/32 3 > Weight (lbs): 0.47
J3220 9/32 x 5/16 3-1/2
J3221 5/16 x 9/32 3-1/2
J3225 11/32 x 3/8 3-3/4
J3226 3/8 x 11/32 3-3/4
J235 Ignition Pliers
J25TR09C Tool Roll
ignition Point File

> Tungsten file for spark plugs, distributors, and other electrical contact points.
> Has chisel tip and smooth extended grip.
Product # Overall Length (in) Weight (lbs)

J2302 5-1/4 0.01
Midget angle noSe PlierS

> Nose angled for easy access.
> Angled teeth provide superior gripping power over standard right angled teeth.
> Plastisol grips for added comfort.
Jaw Jaw Jaw Overall

Product Length Width Thickness Length Weight
# (in) (in) (in) (in) (lbs)
J235 3/4 5/8 11/64 4-1/16 0.10
823
gaSket and carBon ScraPerS
Fleet Maintenance
> Angled blade for access into tight areas.

> Ideal for removing gaskets and carbon.
> Comfortable, four-sided handle.
Blade Width Overall

Product # (in) Length (in) Weight (lbs)
J2336 1-1/2 12 0.30
J2338 1-1/16 11 0.38
cotter Pin Puller

> Precision formed curves provide excellent leverage in prying out cotter pins quickly and easily.
> Large plastic handle.
Blade Length Overall Length Weight

J2306 3-7/16 7-3/4 0.25
PiSton ring coMPreSSor

> Wide band has ratchet mechanism to prevent breakage and slippage.
> Includes “L" handle.
Diameter Diameter
Minimum Maximum Height Weight
fluid systems
J2316 2-1/8 5 3-1/2 0.70
5 Piece oil Filter cuP Wrench Set

Product #: JFFKIT5
> Filter cup wrenches will service 98% of the cars in the U. S. A.
> Made of super-strong nylon fiber composite that will withstand
more torque than conventional metal filter wrenches.
> Metal insert in wrench.
> Includes:
> 65/67 mm, 14 flute oil filter
> 74/76 mm, 15 flute oil filter
> 76 mm, 14 flute oil filter cup
> 93 mm, 15 flute oil filter cup
> 76/80/93 mm, 30/15/36 flute oil
Diameter Minimum Diameter Maximum Height Overall Length Weight

Diameter Minimum (in) Diameter Maximum (in) (mm) (mm) Width (in) (in) (in) (lbs)
2-1/2 3-5/8 65 93 8-3/32 3 12 2.30
SelF-griPPing oil Filter Wrench

> Use for removal and installation of oil filters.
> Filter sizes: 3-1/8" - 4-3/4" (80 mm-120 mm).
> 3/8" drive (also includes 1/2" drive adapter).
Diameter Diameter Diameter Minimum Diameter Maximum Height Overall Weight

Product # Minimum (in) Maximum (in) (mm) (mm) Width (in) (in) Length (in) (lbs)
JFF120 3-1/8 4-3/4 80 120 3-29/32 3-19/64 4-13/64 1.51
heaVy-duty Filter StraP Wrench
Fleet Maintenance
> Heavy-duty cordura strap for high-torque
application requirements.
> For 3/8" and 1/2" ratchet or breaker bar use.
> Fits large oil filters up to 9" (228 mm) diameter.
Diameter Diameter Diameter Minimum Diameter Maximum Height Overall Weight

Product # Minimum (in) Maximum (in) (mm) (mm) Width (in) (in) Length (in) (lbs)
JFF278 4 9 100 228 3-51/64 1-1/2 6-19/32 0.58
oil Filter WrencheS

> Handle swivels to avoid obstructions.
> Stainless steel band for added strength.
Diameter Diameter
Minimum Maximum Overall Weight
Product # (in) (in) Length (in) (lbs)
J3007 2-7/8 3-1/4 8 0.81
J3006 3-1/2 3-7/8 8-1/2 0.81
J3008 4-1/8 4-1/2 9-1/2 0.88
fluid systems
SWiVel oil Filter Wrench
> Stainless steel band with projection welds
for strength and anti-corrosion.
> Heat-treated swivel handle adjusts
to a wide arc of positions.
> Minimum grip: 4-1/8" (104.7 mm).
> Maximum grip: 4-7/16" (112.7 mm).
> Over 150 foot pounds of torque.
Diameter Minimum Diameter Diameter Minimum Diameter Maximum Height Weight

Product # (in) Maximum (in) (mm) (mm) (in) Overall Length (in) (lbs)
JFF5325A 4-1/8 4-7/16 104.7 112.7 1 10 0.65
adjuStaBle oil Filter PlierS

> Heavy-duty forged jaws with three contact
points to grip stubborn oil filters.
> Textured grips for non-slip operation.
Opening Diameter Diameter Diameter Minimum Diameter Maximum Height Overall Weight
Product # Range (in) Minimum (in) Maximum (in) (mm) (mm) (in) Length (in) (lbs)
JFF245B 2 to 4-1/4 2 4-1/4 51 107 29/32 11-29/32 1.00
JFF297 2-1/4 to 5 2-1/4 5 57 127 19/32 13-19/32 1.25
JFF287 3-3/4 to 7 3-3/4 7 94 178 1 19 3.28
825
SPill-Free Funnel
Fleet Maintenance
Product #: JFF160
> Threaded cap and adapter for newer GM

“threaded style" radiator openings.
> Eliminates trapped air pockets which can cause
erratic cooling system and heater performance.
> Controls amount of coolant entering system and
enables unattended filling of the cooling system.
> Eliminates squeaky belts caused by coolant
overflow and protects the environment.
> Includes four adapters which fit most domestic
and foreign vehicles and light trucks.
> Angled neck for use with radiator caps placed at an angle.
8 gallon oil liFt drain

> Quick-release lock ring for fast raising
and lowering of upper tube.
> Total adjustment range of 22-1/2".
> Large 15" funnel with strainer.
> Heavy-duty clamp with height adjustment range of 15".
> Specially shaped container holds up to 8 gallons.
> Reinforced base will help prevent warping from hot oil.
> Large handles and big pour spout for easy pouring.
> 2-1/2" ball bearing wheels (4) swivel and roll easily.
fluid systems
Product # Height (in) Weight (lbs)

JFF11102 48-1/2 13.38
oil Pan Plug rethread tool

Product #: JFF885
> Removes damaged thread and taps a new oversize thread.

> Unique tapping tool ensures the new thread will be
perpendicular to the gasket surface and prevent leakage.
> Works on soft steel and aluminum oil pans
with 1/2", 12 mm, and 14 mm threads.
> Includes:
> 5 Magnetic plug and gaskets
> Piloted drill assembly
> Tap
> Spacer
4 Piece locking hoSe claMP PlierS Set

> Complete unique locking coolant system pliers set is ideal
for one-person replacement of radiators, cooling lines, etc.
> Locking waffle-nose hose clamp pliers to access/open
hard-to-reach flat band hose clamps (7" and 9").
> Locking hose pinch-off pliers to pinch and lock closed
vent/radiator/vacuum/fuel hoses/lines (7" and 9").
> Packaged in sturdy nylon roll pouch.

JFFHC4 6-1/4 12-19/64 3.50
rigid-FlexiBle hoSe claMP PlierS
Fleet Maintenance
Product #: JFFCP700
> Shaft holds position to connect to clamps.

> Extension for hard-to-reach radiator clamps.
> Flexible shaft helps reach difficult locations.
> Locking arm keeps clamps locked in open position.
Pinch-oFF PlierS
> Patented clamping mechanism provides positive
clamping without springs or adjustments.
> Tested to 50,000 cycles without failure.
> Heat-treated steel construction.
> Swivel mounted clamps adjust to provide
parallel clamping operation.
> Cushioned hand grips.
> For pinching-off flexible fuel lines,
brake lines, and vacuum hoses in cars,
motorcycles, and engines of all kinds.
Jaw Opening Jaw Width Jaw Depth Throat Throat Height Max. Jaw Overall Length Weight
Product # (in) (in) (in) Depth (in) (in) Capacity (in) (in) (lbs)
JFF554 3/4 2 1/2 1-1/2 1/2 3/4 5-1/2 0.19
JFF555 2 2 1/2 1-1/2 1/2 1-1/4 9-1/4 0.78
fluid systems
JFF556 2-1/2 2 1/2 2-1/2 1/2 2-1/2 13-3/4 1.25
uniVerSal radiator adaPter

Product #: JFF4500
> Compatible with all brands of radiator pressure

testers and reservoir tank systems.
> Offers 95% application coverage for
most cars and light trucks.
> Durable hard body adapter does not
require inflation or conditioning.
ethylene glycol antiFreeze teSter

Product #: JFF106A
> Professional size 16" disc-type antifreeze tester.

> Easy to read magnified plastic barrel.
> Tests all ethylene glycol based antifreeze
including Dex-Cool®, hot or cold.
> The degree of coolant protection is indicated
by the number of floating discs.
> Temperature compensating with Fahrenheit
and Celsius scales from +32°F to -60° F.
827
antiFreeze teSter
Fleet Maintenance
Product #: JFFCC3
> Compact, lightweight, and break-resistant.

> Easy to read plastic housing.
> Tests all ethylene glycol based antifreeze
including Dex-Cool®, hot or cold.
> Temperature compensating with Fahrenheit
and Celsius scales from +32°F to -60° F.
6 Piece large truck cooling SySteM adaPter Set

Product #: JFF600
> Compatible with most cooling system

pressure generating pumps.
> Includes six cooling system adapters:
> Large trucks with "B" half turn twist on filler neck
> International, Freightliner, and others (52 mm x 2.5 mm)
> Volvo trucks (63 mm x 3 mm)
> Additional Volvo trucks (48 mm x 3 mm)
> Freightliner trucks (60 mm x 3 mm)
fluid systems
> Late model Kenworth and Peterbilt (52 mm x 2.5 mm)

23 Piece coMPlete auto cooling SySteM teSter

Product #: JFF1700
> For cars and light trucks.

> Pump attaches to filler neck.
> 17 adapters included (one is dual adapter).
> Adapter resembles cap from system being tested.
> Includes:
> Complete pressure pump assembly with knob
> Pressure gauge
> Adapters Adapter Sizes
> Weigh (lbs): 15.36 48 mm x 3 mm
45 mm x 3 mm
56.6 mm x 3 mm
52 mm x 3 mm
52 mm x 2.5 mm
63 mm x 3 mm
62 mm x 4 mm
52 mm x 3 mm
34 mm x 3 mm
4 Piece cooling SySteM PreSSure teSter
Fleet Maintenance
Product #: JFF730MA
> Tests all systems from 4 PSI to 30 PSI

caps and 3 to 30 lbs. pressure range.
> Easy to read 2.5" gauge.
> Large barrel with a quick pump.
> Includes: 15" hose, head assembly, cap
adapter, and instruction manual.
4 Piece Quick diSconnect tool kit

> Contains one each of all four sizes of Jiffy-Tite quick
disconnect tools (3/8", 1/2", 5/8" and 5/8" 30%).
> Applications include light-duty GM cars, trucks,
vans, SUVs, and medium-duty GM trucks.

JFFJT4KIT 1-11/16 6-1/2 0.72
6 Piece angled diSconnect Set

Product #: JFFDS400
fluid systems
> Disconnects air conditioning, quick connect
fuel lines, and spring lock couplings on
Ford and Chrysler A/C lines.
> Works on fuel lines and other quick disconnect
couplings on domestic and foreign vehicles.
> Angled handles to access tight spots.
> Made of durable plastic that resists fuels and solvents.
> Includes sizes: 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8".
Height (in) Overall Length (in) Weight (lbs)

1-1/2 3 0.16
19 Piece MaSter diSconnect Set

Product #: JFF5000
> A complete set of the most popular disconnect tools

for AC, fuel, transmission, oil cooler, and air lines.
> A step above the JFF4000 Proto® Master Disconnect Set.
> Includes:
> 3/8" Jiffy-Tite® Disconnect
> 1/2" Jiffy-Tite® Disconnect
> Air line disconnect set
> Low-Profile Fuel Line Disconnect Set
> AC/Fuel Line Disconnect Set
> Fuel Line Quick Disconnect for GM
> Angled AC/Fuel Line Disconnect Set
> 5/16" x 3/8" Scissor Disconnect
> Coupler Disconnect
> Ford Transmission Line Disconnect
Width (in) Height (in) Overall Length (in) Weight (lbs)
12-13/32 3 15 3.62
829
21 Piece MaSter diSconnect Set
Fleet Maintenance
Product #: JFF4000
> Low profile 3/8" flex fuel disconnect tool for
disconnecting hard-to-reach and difficult fuel filters.
> Stepped disconnect tools fit transmission oil
cooler lines on many Fords and other vehicles.
> Low-profile fuel module disconnect for GM
works great on Suburban, Tahoe, and full-
sized truck module applications.
> Coupler disconnect fits applications on
transmissions, power steering, and radiators.
> Includes:
> 6 Piece Angled Disconnect Set
> 6 Piece Angled AC/Fuel Line Disconnect Set
> Fuel Filter Disconnect for GM
> Hairpin Disconnect
> Fuel Line Quick Disconnect for GM
> 5/16" and 3/8" Scissor Disconnect
> Coupler Disconnect
> Ford Transmission Line Disconnect Set
Width (in) Height (in) Overall Length (in) Weight (lbs)
8-1/2 2-3/32 11-51/64 1.68
fluid systems
ratchet-Style tuBing cutter

> High-impact fiberglass handle is
lightweight and durable.
> Cuts copper, plastic, and PVC pipe from
1/8" to 3/8" (3.2 mm to 9.5 mm).
> Easily adjusts to fit pipe.
Capacity Overall Length Weight

JFF375 3/8 6 0.27
therMoStat gaSket cleaner

> Cleans hard-to-reach gasket surfaces.
> Use with a die grinder to quickly clean
gasket surfaces, oil pans, water pumps,
and other inaccessible applications.
> Equipped with a floating guide shaft so user can
steer the abrasive pad around the gasket surface.
> Use on oil pans, water pumps, and other gasket areas.

JFF2250 1-1/2 8 0.31
ratchet PuMP
Fleet Maintenance
> Converts any 3/8" air ratchet to a fluid transfer pump.
> Fill or drain brake fluid, power steering fluid, transmission
fluid, engine oil, coolant, gear oils, and more (Not approved or
intended for use with gasoline or flammable fluids).
> Quick coupling fittings allow easy hose changes and no-drip storage of pump.
> Fast draw rates:
> Transmission fluid 1L (34 oz.) in 40 seconds (8 mm)
> 20/50 motor oil 1L (34 oz.) in 45 seconds (6 mm)
> Includes the ratchet pump, 39" 8 mm discharge hose, 31" 6 mm suction straw, 19"
8 mm suction hose packaged in a rugged blow-molded case (Air ratchet not included).

Product # GPM/IPM (in) (lbs)
36 ounces per
JFF910 8 2.23
minute
hoSe claMP PlierS

> Installs and removes wire spring tension clamps.
> Two position jaws grip full range of clamp sizes.

J252G 7-3/4 0.56
electrical systems
900 Peak aMP ultra-PortaBle juMP Starter
> Built-in battery charger (accepts standard 110v extension
cords) with automatic overcharge protection.
> Built-in removable flashlight.
> 27" #4 AWG cables with full-size clamps.
> 9 amp-hour battery.
> Lightweight.
> 12v DC power socket to power accessories.
Product # Voltage Weight (lbs)

JFE5120 12V 10.00
6V/12V/24V Fleet charger

> UL/CUL/CSA approved for indoor/outdoor use.
> 455 amp manufacturers boost rating.
> 255 amp UL continuous assist rating.
> 75-/65-/30 amp UL continuous rating.
> Automatic 90-minute timer with hold position.
> AC and DC circuit overload protected.
> Patented “Stop/Go Light".
> Heavy-duty chrome handle.
> Fan cooled.
> 500 amp rated clamps.

JFEH6006 6/12/24V 45.00
831
12V/24V Fleet charger
Fleet Maintenance
> Commercial quality jump starter designed for

heavy-duty and over the road jump
starting applications.
> Built-in automatic 10 Amp battery charger.
> 12/24 volt settings.
> 1400 Cold cranking amps in 12 volt mode.
> 800 Cold cranking amps in 24 volt mode.
> 10’ Jumper cable leads (1/0 welding cable).

JFE14289 12/24V 52.00
6 Piece Battery kit

> Complete battery tool service kit with pouch.
> Includes:
> Extra long 5/16" ratcheting terminal wrench
> 5/16" standard length ratcheting terminal wrench
> 10 mm standard length ratcheting terminal wrench
> Battery pliers
> 4-in-1 battery terminal cleaner
> Battery puller/lifter
Overall Length
Product # Height (in) (in) Weight (lbs)
electrical systems
JFE6KIT 11-19/32 11-19/32 2.47
12 Piece terMinal tool kit

Product #: JFE96030
> Fits most GM computer connectors and terminals.
> Individually handled for easy access into tight places.
> Color coded for easy identification.
Red Anodized Handle Green Anodized Handle

Tube, Spring-Loaded, 3.3 mm x 28.0 mm Tube, 3.3 mm x 28.0 mm
Square Blade, 1.4 mm x 19.0 mm Tube, 4.3 mm x 13.0 mm
Flat Blade, 1.5 mm x 24.75 mm Tube, 3.75 mm x 13.0 mm
Flat Blade, 2.0 mm x 23.0 mm Tube, 3.0 mm x 13.0 mm
Fork Blade, 8.0 mm x 24.0 mm Flat Twin Blade, 3.0 mm
Flat Blade Screwdriver, 3/16" x 1" Flat Twin Blade, 1.6 mm
auto MeMory SaVer

> Prevents the loss of electronic memory when disconnecting the vehicle’s battery.
> High visibility coiled cord stretches to 8 feet.
> Easy storage in tool box.
> OBD2 connection uses positive and ground pins only, will not interfere with fault codes.
> Coiled cord prevents tangles.
> In-line fuse.
> Cigarette lighter input - 12 volt power source not included.
Product # Voltage Width (in) Height (in) Cable Length (in) Weight (lbs)
JFE28 12V 4 1-5/16 96 0.46
11 Piece oxygen SenSor Socket Set
Fleet Maintenance
> Master oxygen sensor and sending unit tool set.
> Includes:
> 1/2" x 29 mm x 90 mm oxygen sensor socket
> 3/8" x 7/8" x 90 mm oxygen sensor socket
> 1/2" x 27 mm x 85 mm fuel injector socket
> 3/8" x 7/8" x 80 mm vacuum switch socket
> 3/8" x 1-1/16" x 74 mm oil sending unit socket
> 3/8" x 7/8" x 50 mm oxygen sensor socket
> 3/8" x 7/8" x 30 mm offset oxygen sensor wrench
> 3/8" x 22 mm special tube socket
> 2-1/8" offset oxygen sensor wrench
> 3/8" deep oxygen sensor socket
> Oxygen sensor thread chaser
Overall Length
Product # Height (in) (in) Weight (lbs)
JFEOS11 9 15 8.10
Battery PoSt and terMinal cleaner

> Circular outer brush cleans contact area.
> Cleans cable end with cap removed.
electrical systems
J2320 3-15/16 0.14
Battery terMinal SPreader and reaMer

> Spreads and cleans clamps in one quick operation.

J319 7-1/2 0.55
large Bed creePer

> Heavy-duty design supports a maximum load of
600 lbs. and a dynamic load capacity of 400 lbs.
> Extra-wide 19" x 43" contoured bed with
pillowstyle raised headrest provides ample
shoulder, hip, and head support.
> 1" diameter, welded and powder-
coated steel tubular frame.
> 1-1/2" ground clearance.
> Six 3" industrial grade casters for easy
movement on rough shop floors.
Capacity Width Overall Weight

Product # (lbs) (in) Length (in) (lbs)
JFC600B 600 19 43 23.79
833
SPider creePer
Fleet Maintenance
> 40" heavy-duty creeper.

> Full-size, comfortable, and tough.
> 400 lbs. capacity; sturdy and reliable for
the most brutal shop environments.
> 1/2" ground clearance / 2" minimum height allows user
to perform services beneath very low profile vehicles.
> Six 3" industrial grade casters for easy
movement on rough shop floors.
> 1-1/2" powder coated steel constructed frame.
Capacity Width Overall Weight

Product # (lbs) (in) Length (in) (lbs)
JFC400SPI 400 18 40 26.91
heaVy-duty tool trolley

> 500 lbs. seating capacity.
> 18" seating height.
> 1" chrome finished tubular steel constructed frame.
> 3" industrial grade hard floor casters, 2 with brakes.
> Comfortable 16" x 16" x 3-1/2" thick
vinyl fabric over foam seat.
> Contoured 12" x 6" x 2-1/2" thick vinyl over foam back.
> 12" x 18" x 1-3/4" heavy-duty stamped steel tool tray.
chassis & suPPort
Capacity Width Height Weight

Product # (lbs) (in) (in) (lbs)
JFC1010 500 16 36 21.38
heaVy-duty ShoP Stool

> 300 lbs. seating capacity.
> 29" to 34" pneumatic gas lift seat height adjustment.
> Comfortable 14" diameter x 3-1/2"
thick vinyl fabric over foam seat.
> Contoured 12" x 6" x 2-1/2" thick vinyl over foam back.
> Durable steel constructed seat control
with dual 1" tubular steel back bars.
> Back depth adjustment.
> 1" chrome finished tubular legs with
18" diameter steel foot ring.
Capacity Width Height Weight

Product # (lbs) (in) (in) (lbs)
JFC1011 300 14 44 24.02
Fender coVer - heaVyWeight

> Expanded 115 gauge thick vinyl material.
> Grease and acid-resistant vinyl.
> Full length sewn in tool ridge.
> Textured grip back.
> Binding around outside edge for added durability.
Overall Length
Product # Width (in) (in) Weight (lbs)
JFCHD1B 27 34-1/2 1.95
Fender coVer - lightWeight
Fleet Maintenance
> Expanded 70 gauge vinyl material.
> Grease and acid-resistant vinyl.
> Full length sewn in tool ridge.
Overall Length
JFCR2B 27 34-1/2 0.95
2 Pack Fender coVer

> Plasticized vinyl-coated fender covers (2).
> Sturdy foam construction.
> Die-cut finished edge.
Overall Length
JFC100 24 36 2.79
chassis & suPPort

tWin angle light
> Ergonomically designed body style.
> Comes with two premium 13W bulbs.
> 25’ premium cord.
> Improved lens design allows for easy bulb changing.
> Internal ballast.
> Magnetic holder included.
Product # Voltage Lumens Width (in) Height (in) Cord Length Overall Length (in) Weight (lbs)
JFC98468 120V Rated up to 1660lm 4 2-1/2 25-foot 13-1/2 3.80
rechargeaBle led cordleSS ShoP light

> Molded-in handle grip and lens edge guard.
> Polycarbonate high-strength hook that swivels to
keep light on the subject and away from your eyes.
> 30 super bright 100,000 hour flood light style LEDs.
> 1,000 charge cycle NiMh battery pack with
10-hour cordless use between charging.
> Smart charge indicator LED.
> 12V DC and 120V AC chargers included.
Product # Voltage Lumens Width (in) Height (in) Overall Length (in) Weight (lbs) Battery Type
JFC4000 12V/110V 174.3 2-1/4 3 12 1.60 NiMh internal battery
835
aluMinuM led/uV dual light
Fleet Maintenance
> Tough aluminum housing is anodized inside and out.

> Patterned, rugged handle for firmer
grip and resists corrosion.
> Up to 100,000 hours of service.
> High-impact polycarbonate lens.
> Magnetic base.
> UL AC charger and 12V cigarette charger included.
> 1.5W LED flashlight head rated at 130 lumens.
> 33 bright white LED rated at 80 lumens.
> 20 UV LED rated at 390NM.
Diameter Overall
Maximum Length Weight
Product # (in) Voltage Lumens (in) (lbs) Battery Type
1.5W LED flashlight head rated at 130 lumens;
JFC98266D 1-45/64 12V/110V 33 bright white LED rated at 80 lumens; 15-1/2 1.05 NiMh internal battery
20 UV LED rated at 390NM
continuouS Shot air greaSe gun

> Heavy-duty cast aluminum body with
comfortable cushion-grip.
> 3-way loading: bulk, 14 oz. cartridge, and filler pump.
> Bleeder valve for purging unwanted air.
> 40:1 ratio.
> Output per stroke: 2 ml.
chassis & suPPort
> Output pressure: 3,600 PSI.

JFC63HD 16-3/32 4.05
heaVy-duty Single Shot air greaSe gun

> Heavy-duty composite body with
comfortable cushion-grip.
> 3-way loading: bulk, 14-oz. cartridge, and filler pump.
> Bleeder valve for purging unwanted air.
> 40:1 ratio.
> Output per stroke: 2 ml.

JFC53HD 16-13/32 3.22
heaVy-duty PiStol griP greaSe gun

> 3-way filling: bulk, cartridge, or filler pump.
> 16 oz. bulk fill.
> 14 oz. standard cartridge.
> Heavy-duty 1.7 mm thick seamless
barrel to avoid dents.
> Aluminum head reduces weight.
> Heavy-duty flexible 18" nylon hose and
6" metal spout for easy use.

JFC33HD 16 3.86
Suction gun
Fleet Maintenance
> Heavy-duty, 16 oz. capacity, 1.7 mm thick
seamless barrel with textured finish.
> 12" clear flexible tube.
> Heavy-duty “T" handle with finger grooves for easy use.

JFC19HD 14-51/64 2.35
7 Piece VacuuM/PreSSure hand PuMP kit

> One-person brake bleeding kit, accessories
are included to perform multiple vacuum
and pressure tests on vehicle.
> Includes compound vacuum/pressure
gauge with rubber protective boot.
> Switch between vacuum/ pressure at the turn of
a switch – produces and measures vacuum or
pressure with equal performance and precision.
> Single-hand vacuum/pressure release action
allows multiple tests without disconnection.
> Dual hand pump has ergonomically designed
handle for ease of operation.
Width Height Overall Weight

Product # (in) (in) Length (in) (lbs)
chassis & suPPort

JFC5000K 10-3/32 4-51/64 13-13/64 5.58
Bearing Packer
> Flushes out old grease and re-packs
bearings with less mess.
> Fits bearings up to 3-1/2" (outer diameter).
> Grease stays in tool cavity and off of your hands.
> Simplifies the process: Place the bearing on the
piston; press down the cap until the old grease is
forced out and the new grease shows on top.
Overall
Product # Height (in) Length (in) Weight (lbs)
JFC300 4 6 1.00
9 Piece Wheel torQue MaSter kit

> Designed for use with a 1/2" drive impact wrench.
> Comes with a color wall chart and custom case.
Overall Length
JFC1503 10-45/64 13-19/32 9.70
837
5 Piece Wheel torQue extenSion kit
Fleet Maintenance
> Designed to torque wheel nuts on foreign

and domestic cars and light trucks.
> For use with thin wall or impact lug nut sockets.
> Includes wall chart and custom case.

Product # Width (in) (in) (lbs)
JFC1463 6-45/64 10-45/64 3.59
4 Piece aMerican car Wheel torQue kit

> For work on American makes of
cars, light trucks, and vans.
> Includes four torque sockets.

Product # Width (in) (in) (lbs)
JFC1553 10-45/64 12-19/64 4.82
chassis & suPPort
6 Piece uniVerSal diSc Brake caliPer Set

Product #: JFC2500MA
> Universal brake caliper tool set assists

in the replacement of pads on most
vehicles with 4-wheel disc brakes.
> Tool and adapters rotate brake pistons into calipers
allowing clearance for newer, thicker brake pads.
> Five disc sizes to fit most domestic and foreign
vehicles, covers most: Honda, Ford, GM, Jaguar,
Mazda, Audi, Chrysler, Nissan, Toyota, VW,
and Subaru 4-wheel disc brake systems.
> Hex end threaded bolt pushes adapter into caliper;
smooth operation with wrench or socket.
9 Blade Standard Feeler gauge Set

Product #: J000A
> Contains 9 short 3 inch blades in steel holder.

> Sizes: .003", .004", .005", .006", .008",
.010", .012", .015", .018".
> Blades etched with both decimal
size and metric equivalent.
9 Blade Metric Feeler gauge Set
Fleet Maintenance
Product #: J00MM9
> 1/2" x 3" metric blades in steel holder.

> Sizes: 0.06 mm, 0.10 mm, 0.15 mm, 0.20 mm,
0.30 mm, 0.35 mm, 0.40 mm, 0.50 mm, 0.60 mm.

Product #: J00MM15

> Sizes: 0.06 mm, 0.07 mm, 0.08 mm,
0.10 mm, 0.15 mm, 0.20 mm, 0.25 mm,
0.30 mm, 0.35 mm, 0.40 mm, 0.45 mm,
0.50 mm, 0.55 mm, 0.60 mm, 0.70 mm.
feeler gauges
25 Blade MaSter Feeler gauge Set
Product #: J000AA
> 1/2" x 3" blades in steel holder.

> Sizes: .0015" thru .040" except .019".

Product #: J00MM25

> Sizes: 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm,
0.08 mm, 0.09 mm, 0.10 mm, 0.15 mm, 0.20 mm,
0.25 mm, 0.30 mm, 0.35 mm, 0.40 mm, 0.45 mm,
0.50 mm, 0.55 mm, 0.60 mm, 0.65 mm, 0.70 mm,
0.75 mm, 0.80 mm, 0.85 mm, 0.90 mm, 0.95 mm,
1.00 mm.
839
22 Blade SteP cut Feeler gauge Set
Fleet Maintenance
Product #: J000N
> “Go / no-go" 1/2" x 3-5/16" blades in steel holder.

> Each blade has two different thicknesses.
> Sizes: .004/.006", .005/.007", .006/.008",
.007/.009", .008/.010, .009/.011", .010/.012",
.011/.013", .012/.014", .013/.015", .014/.016",
.015/.017", .016/.018", .017/.019", .018/.020",
.019/.021", .020/.022", .021/.023", .022/.024",
.023/.025", .024/.026", .025/.027".
11 Blade Bent Feeler gauge Set

Product #: J000M
> 1/2" x 4" blades with a 1" bend in steel holder.

> Sizes: .006", .008", .010", .011", .012",
.013", .014", .015", .018", .019", .020".
> Blades are offset at a right angle to help protect hands
feeler gauges
from a hot manifold while setting an overhead value.

12 Blade long Feeler gauge Set

Product #: J000SL

> Sizes: .0015", .002", .003", .004", .005", .006",
.008", .010", .012", .014", .015", .020".
25 Blade long Feeler gauge Set

Product #: J000TL

> Sizes: .0015", .002", .003", .004", .005",
.006", .007", .008", .009", .010", .011", .012",
.013", .014", .015", .016", .017", .018", .019",
.020", .021", .025", .027", .030", .040".
6 Blade non-Magnetic Feeler gauge Set
Fleet Maintenance
Product #: J000BR
> Contains non-magnetic brass feeler blades
for checking the air gap in electronic ignition
systems for all weather conditions.
> Sizes: .006", .008", .010", .012", .014", .016".
Short Blade holder

Product #: J000C
> Large enough to accommodate all 26 short blades.
feeler gauges
Short Blade Feeler gaugeS
Product # Blade Thickness (in) Weight (lbs)
J0015 0.0015 0.01
J002 0.002 0.01
J003 0.003 0.01
J004 0.004 0.04
J005 0.005 0.01
J006 0.006 0.01
J007 0.007 0.01
J008 0.008 0.02
J009 0.009 0.01
J010 0.010 0.02
long Blade Feeler gaugeS

Product # Blade Thickness (in) Weight (lbs)
J0015L 0.0015 0.01
J002L 0.002 0.01
J003L 0.003 0.03
J004L 0.004 0.01
J005L 0.005 0.01
J006L 0.006 0.02
J008L 0.008 0.02
J010L 0.010 0.02
J015L 0.015 0.03
841
10 Blade ignition Feeler gauge Set
Fleet Maintenance
Product #: J000D
> 1/4" x 1-3/4" blades in steel holder.

> Sizes: .013", .015", .017", .018", .020",
.025", .030", .032", .035" .040".
16 Blade oVerhead ValVe Feeler gauge Set

Product #: J000R
> 1/2" wide bent gauges for setting overhead valves.

> Sizes: .009", .010", .011", .014", .015",
.016", .017", .018", .019", .020", .021",
.023", .024" .025" .026", .027".
> Blades are bent at a 45° angle to help protect hands
from a hot manifold while setting an overhead value.
high energy SPark Plug gaP gauge Set

feeler gauges
Product #: J000J
> For use in setting gaps and spark plugs
with high energy ignition systems.
> Includes blade holder, electrode bender
and six bent wire gauges in sizes .044",
.045", .050", .054", .060", .080".
> Gauges marked with both decimal
SPark Plug gaP gauge Set

Product #: J000K
> Spark plug electrode bender and eight bent

wire gauges in sizes .020", .022", .025",
.027", .028", .030", .035" .040".
> Gauges marked with both decimal
FlexiBle retrieVing and holding toolS

> Designed to position or retrieve small objects.
> Spring-loaded plunger actuates jaws
at end of flexible casing.

J2344 13-1/2 0.19
J2345 23-1/2 0.26
FlexiBle Magnetic retrieVing toolS
Fleet Maintenance
> Retrieves small objects from hard-to-reach places.
> Push button allows reaching an object
before energizing the magnet.
Lift Power Overall Length

Product # (lbs) (in) Weight (lbs)
J2377 1.50 19-1/2 0.27
J2378 3.00 24-1/2 0.37
Pocket Magnetic retrieVing toolS

> J2375 includes versatile telescoping
handle and all-angle ball joint.
> J2376A has an aluminum head that contains a
neodymium magnet that can lift up to 1-1/2 lbs.,
all angle ball joint, and a pocket clip.

J2375 16-3/4 to 26-3/4 0.40
J2376A 8 0.08 J2375 J2376A
insPection & Pick-uP tools

inSPection MirrorS
> Versatile all-angle ball joint.
> Features telescoping handle (J2372 and J2373).
> With pocket clip (J2373).
J2374 J2371 J2373
Product # Mirror Shape Mirror Size (L x W in) Mirror Diameter (in) Overall Length (in) Weight (lbs)
J2370 Circular – 7/8 7-1/2 0.08
J2374 Circular – 1-1/4 8 0.09
J2371 Oval 1 x 2 – 8-3/4 0.08
J2372 Circular – 2-1/4 10 to 14 0.25
J2373 Rectangular 2-1/8 x 3-1/2 – 11-1/4 to 15-1/2 0.30
all-PurPoSe Brake PlierS

> Easily installs and removes brake shoe
retaining spring on drum brakes.
> Socket end removes spring from anchor stud.
> Notched and installs spring on anchor.

J217 12-7/8 1.05
843
FacoM® Stud extractorS external caM/knurl tyPe
Fleet Maintenance
> Turn extractor with a ratchet, wrench, or socket

to engage the cam and stud, then pull out stud.
> 1/2" and 1/4" drive capacity.
> Knurled wheel grips stud when pressure is applied.
> Hex drive can be driven with wrench or ratcheting tool.
> Ideal for bolts with rusted, corroded,
or stripped threads.
> Heavy-duty finish.
Product # Drive Size (in) Capacity (in) Capacity (mm) Overall Length (in) Weight (lbs)
FA-286A 1/2 3/4 20 2-5/32 0.86
FA-286A.PL 3/4 1 27 2-15/16 2.11
FacoM® 5 Piece Stud extractor roller Set

Product #: FA-287B.JS5
> 5 Stud drivers for sizes M6, M7, M8, M9 and M10.
> Supplied in a CKS rack.
Overall
Length
extractors
Contents Description (in)

FA-287B.6 Stud Extractor, Internal Cam/Roller Type M6 2-3/4
FacoM® Stud extractorS internal caM/roller tyPe

> Designed to grip studs using cam assemblies.
> Capacity ranging from 6-16 mm.
> 1/2" drive.
> Full polish finish.
Product # Drive Size (in) Capacity (in) Capacity (mm) Overall Length (in) Weight (lbs)
FA-287B.6 1/2 13/32 6 2-3/4 0.38
FA-287B.7 1/2 15/32 7 2-3/4 0.38
FA-287B.8 1/2 9/16 8 2-3/4 0.38
FA-287B.9 1/2 5/8 9 3-5/32 0.56
FA-287B.10 1/2 1/4 10 3-5/32 0.55
FA-287B.12 1/2 9/32 12 3-5/32 0.53
FA-287B.14 1/2 5/16 14 2-15/16 0.76
FA-287B.16 1/2 11/32 16 2-15/16 0.69
FacoM® 3 Piece nut SPlitter
Fleet Maintenance
Product #: FA-289
> Includes 19 mm and 30 mm Nut
Splitters and Spare Screw.
> Supplied in a plastic tray.
FacoM® nut SPlitterS

> Removes frozen, corroded, or rusted nuts.
> Will not damage bolt threads.
External External
extractors
Min. Screw Max. Screw Internal Diameter Internal Diameter Diameter Diameter Overall
Product # Size (in) Size (in) (in) (mm) (in) (mm) Length (in) Weight (lbs)
FA-289.19 2 8 3/4 19 1-1/4 31 4-11/32 0.59
FA-289.36 16 20 1-7/16 36 2-7/16 62 8-1/16 2.50
FacoM® nut SPlitterS - SPare ScreW

FA-289.V3 7-15/32 1.77
FacoM® Monkey WrencheS

> Satin finish provides corrosion resistance
and a slip-resistant grip.
> Sturdy, wide-opening tools for heavy-duty
work on farms and building sites.
> Fixed jaw/handle and worm gear
made from hardened steel.
> Smooth jaw faces help prevent
marring of fastener surfaces.
Product # Size (in) Jaw Depth (in) Jaw Thickness (in) Height (in) Overall Length (in) Weight (lbs)
FA-105.230 2-3/8 1-25/32 25/32 19/32 9-1/16 1.15
FA-105.280 2-3/4 1-11/32 21/32 25/32 11-1/32 1.79
FA-105.375 3-1/8 1-25/32 7/8 7/8 14-23/32 3.36
845
10 Piece ScreW extractor Set
Fleet Maintenance
Product #: J9500B
> Drive into end of broken pipe or fitting.
> Use tap holder or wrench on extractor to turn out broken part.
> Size stamped on extractor refers to drill bit
size to be used with that extractor.
Contents Description Overall Length (in)

J9521 Screw, Extractor 1/8" 2-5/16
J9524 Screw, Extractor 5/16" 3
J9525B Screw, Extractor 15/32" 3-7/8
J9529 Screw, Extractor 1-1/16" 5-1/2
5 Piece ScreW extractor Set

Product #: J9500A

> Use tap holder or wrench on extractor to turn out broken part.
extractors
> Size stamped on extractor refers to drill bit

size to be used with that extractor.
Contents Description Overall Length (in)

J9524 Screw, Extractor 5/16" 3
J25TR49C Tool Roll 5 Pockets 6-3/32
ScreW extractorS
> Use tap holder or wrench on extractor
to turn out broken part.
> Size stamped on extractor refers to drill
bit size to be used with that extractor.
Product # U.S.S. (in) Drill Size (in) Diameter Minimum (in) Diameter Maximum (in) Overall Length (in) Weight (lbs)
J9521 1/4, 5/16 1/8 1/8 3/16 2-5/16 0.02
J9522 3/8 3/16 11/64 3/16 2-5/8 0.02
J9523 7/16 7/32 13/64 1/4 2-7/8 0.05
J9524 1/2, 9/16 5/16 19/64 5/16 3 0.07
J9525 5/8 3/8 11/32 3/8 3-1/4 0.12
J9525B 3/4 15/32 1/8 1/8 3-7/8 0.18
J9526 7/8 9/16 1/2 1/2 4-1/4 0.29
J9527 1, 1-1/8 21/32 19/32 5/8 4-7/8 0.47
J9528 1-1/4, 1-3/8 13/16 23/32 3/4 5-3/8 0.72
J9529 1-1/2 1-1/16 31/32 1 5-1/2 1.30
10 Piece Bolt extractor Socket Set
Fleet Maintenance
Product #: J69X00
> The working end has a helical shaped flute

to help grip rounded fasteners, round
head bolts, and pan head screws.
> 3/4" Drive size.
Overall
Contents Description Length (in)
J69X09 Extractor, Socket 7 mm, 1/4", 9/32" 1-1/16
J69X10 Extractor, Socket 8 mm, 5/16" 1-1/16
J69X12 Extractor, Socket 3/8" 1-1/16
J69X20 Extractor, Socket 15 mm, 16 mm, 5/8" 1-1/16
extractors
FeatureS and BeneFitS – Bolt extractorS
> Easily remove rusted, rounded or damaged nuts and bolts.

> 18-30 teeth in a hexagonal configuration
help grip rounded hexagonal fasteners, round
head bolts and pan head screws.
> Low profile design helps gain access
to fasteners in tight spaces.
> The non-working end can be turned
with wrenches or sockets.
> Can be used in combination with other drive tools (such > Easily remove rusted, rounded or
as extensions, universal joints or ratchets with short arc damaged nuts and bolts.
swings) to help reach fasteners in difficult locations.
> Through-hole design helps gain access to
fasteners at the end of long bolts or studs.
> Sizes range from 1/4" - 5/8" and 7 - 16 mm.
Each socket can turn multiple fastener sizes.
> Can be used on fractional or metric fasteners.
> Through-hole design helps gain access to

fasteners at the end of long bolts or studs.
847
3/8" driVe 13 Piece hand iMPact driVer Set
Fleet Maintenance
Product #: J7099A
> Designed to loosen hard to turn bolts and nuts.

> Hand impact driver has heavy-duty
spring for added torque.
> Popular interchangeable bits are packaged in
plastic blow-molded box for easy storage.
Overall
Contents Description Length (in)
J7099 Driver, Hand Impact 3/8" DR 5-1/2" 5-1/2
J60002 Bit, Insert #1 Phillips® 1/4" Hex 1
J60202 Bit, Insert 3/16" Slotted 1/4" Hex 1
J60208 Bit, Insert 9/32" Slotted 1/4" Hex 1
J60050 Bit, Insert #1 Phillips® 5/16" Hex 1-1/4
J60256 Bit, Insert 3/16" Slotted 5/16" Hex 1-1/2
J60262 Bit, Insert 9/32" Slotted 5/16" Hex 1-1/2
J6930 Bit, Holder Power 3/8" DR 5/16" Hex 1-5/16
J6931 Bit, Holder Power 3/8" DR 1/4" Hex 1-1/4
Pullers
Battery caBle and SMall Bearing Puller

> Uses toggle-type action to grip onto all
standard post battery terminals.
> Pulls small bearings and gears
with 1" reach and spread.
Product # Weight (lbs)

J4041 0.65
Pulley Puller
> For removing single and two-groove pulleys from
alternators and power steering pumps.
> Two position yoke permits pulling bearings on
both standard and heavy-duty alternators.

J4053 2.10
cloSe QuarterS Pilot Bearing Puller
Fleet Maintenance
> Designed to pull flywheel pilot bearings
with inside diameters 1/2" to 1-1/2".
> Removes bearings and bushings from starters,
generators, magnetos, and small electric motors.

J4059 2.30
10-Way Proto-eaSe™ adVantage Slide haMMer Puller Set

Product #: J5040
> Slide hammer puller set packaged in a convenient plastic blow-molded carrying/storage case.
Description Qty.
Hex Jam Nut (5/16"-24) 3
Hex Jam Nut (5/8"-18) 1
Hex Head Cap Screw (5/16"-24) 3
Puller Head 1
Adjusting Cone 1
Forcing Screw 1
2-Way Crossarm 1
Pulling Hook 1
Pulling Adapter-Machine 1
Pilot Bearing Puller Jaw 3
Pullers
5 lbs. Slide Hammer 1
Puller Arm 1
Medium Puller Jaw 3
Long Puller Jaw 3
Self Tapping Screw 1
Adapter For Adjustable Jaw Wrench 1
Retainer 1
Shank and Tee Bar Assembly 1
Sleeve (5/8"-18) 1
Forcing Screw 1
Front Hub Remover 1
Blow-Molded Case 1
reVerSiBle jaW Slide haMMer Puller

Product #: J5049
> Versatile puller which will accomplish many pulling jobs

involving gears, bearings, outer races, grease retainers,
oil seals, etc.
> Either two or three puller jaws may be used to handle
“inside" pulling jobs such as bearing cups and outer racers,
as well as regular “outside" pulling jobs.
> The 5 lbs. slide hammer can be removed and
used independently.
> Overall Length: 27".
2-Jaw Spread 3-Jaw Spread

Inside Outside Inside Outside
Min. Max. Min. Max. Min. Max. Min. Max.
1-1/4" 3-1/2" 1" 4-1/2" 1-1/2" 4-1/4" 1-1/2" 4-1/2"
Made in USA accurate at time of printing, consult www.protoindustrial.com for updated information. Phillips® is a trademark of Phillips Screw Company
849

Fleet Maintenance

Uploaded by

Copyright:

Available Formats

Fleet Maintenance

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fleet Maintenance

Uploaded by

Copyright:

Available Formats

What tools are described for removing bolts and nuts?

What tools are described for removing bolts and nuts?

What tools are discussed for pulling components?

What tools are discussed for pulling components?

your fleet is on the move. so are you.

exceed various government, ASME, and aerospace specificatons.

Diagnostic Smoke Machine

> Patented UltraTraceUV™ the only OEM-approved dye.

diagnoStic SMoke Machine

diFFerential cylinder PreSSure teSter

14 Piece tranSMiSSion/oil teSter PreSSure kit

Product # Graduation Weight (lbs)

> Complete compression testing on gasoline

25 Piece deluxe coMPreSSion teSt kit

> Complete package for compression

15 Piece dieSel coMPreSSion teSter

caMShaFt Bearing tool

> Ideal for testing vacuum lines and components -

Product # Graduation Weight (lbs)

19 Piece BaSic Fuel injection teSt kit

Product # Graduation Weight (lbs)

51 Piece Fuel injection teSt kit

7 Piece PneuMatic Fan clutch Wrench Set

Overall Length (in) Weight (lbs)

coMPreSSion gauge PartS

MaSter SerPentine Belt tool

adjuStaBle Pin SPanner Wrench

Opening Range Overall Length Weight

> Master kit contains a dual Cam-Clamp

large ValVe SPring coMPreSSor

17 Piece Flaring tool coMBination kit

> Includes all adapters and tools necessary

Overall Length (in) Weight (lbs)

Budd Wheel deeP length iMPact SocketS

3/8" driVe uniVerSal SPark Plug SocketS - 6 Point

9 Piece SPark Plug Set

Drive Size Point Overall Weight

> Includes three different sizes and three

Drive Size Point Overall Weight

SPark Plug Boot PullerS

Bend Height Overall Weight

JFE700A 40° 1-19/32 15-13/32 0.88

tailPiPe and exhauSt cut-oFF tool

Capacity Overall Length Weight

9 Piece ignition Set

ignition Point File

Product # Overall Length (in) Weight (lbs)

Midget angle noSe PlierS

Jaw Jaw Jaw Overall

> Angled blade for access into tight areas.

Blade Width Overall

cotter Pin Puller

Blade Length Overall Length Weight

PiSton ring coMPreSSor

J2316 2-1/8 5 3-1/2 0.70

5 Piece oil Filter cuP Wrench Set

Diameter Minimum Diameter Maximum Height Overall Length Weight

SelF-griPPing oil Filter Wrench

Diameter Diameter Diameter Minimum Diameter Maximum Height Overall Weight

Diameter Diameter Diameter Minimum Diameter Maximum Height Overall Weight