Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 57 views

    Physics Lab Report

    Uploaded by

    api-327729914
    This lab report describes an experiment to verify Ohm's Law using a circuit with resistors and measuring devices. The experiment involved connecting a circuit with different resistors and measuring the current and voltage. The results were used to calculate resistance and verify it matched the true resistor values. Issues with some malfunctioning equipment affected the results. In conclusion, Ohm's Law relates voltage, current, and resistance as measured in this circuit experiment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Physics Lab Report

    Uploaded by

    api-327729914
    57 views9 pages
    This lab report describes an experiment to verify Ohm's Law using a circuit with resistors and measuring devices. The experiment involved connecting a circuit with different resistors and measuring the current and voltage. The results were used to calculate resistance and verify it matched the true resistor values. Issues with some malfunctioning equipment affected the results. In conclusion, Ohm's Law relates voltage, current, and resistance as measured in this circuit experiment.

    Original Title

    physics lab report

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This lab report describes an experiment to verify Ohm's Law using a circuit with resistors and measuring devices. The experiment involved connecting a circuit with different resistors and measuring the current and voltage. The results were used to calculate resistance and verify it matched the true resistor values. Issues with some malfunctioning equipment affected the results. In conclusion, Ohm's Law relates voltage, current, and resistance as measured in this circuit experiment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    57 views9 pages

    Physics Lab Report

    Uploaded by

    api-327729914
    This lab report describes an experiment to verify Ohm's Law using a circuit with resistors and measuring devices. The experiment involved connecting a circuit with different resistors and measuring the current and voltage. The results were used to calculate resistance and verify it matched the true resistor values. Issues with some malfunctioning equipment affected the results. In conclusion, Ohm's Law relates voltage, current, and resistance as measured in this circuit experiment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    OHM S

    PHYSICS LAB REPORT

    LAW
    '

    Accelerated Physics 1101 Group1


    Mahidol University International Demonstration School

    Member:
    1. Phaphat Aowsathaporn Mill
    2. Nutchanon Charnwutiwong Nont
    3. Tanakom Kaweewuthisinp Gun
    Introduction
    Ohm’s law is the law that deals with and
    explains the relationship between voltage and
    current in an ideal conductor. It mainly involves
    voltage, current, and resistor/resistance. Ohm’s
    law says that the potential difference (voltage) is
    directly proportional to the current in an ideal
    conductor. This means that if the voltage is
    higher, the current will be higher as well.
    However, the current in an ideal conductor is
    inversely proportional to the resistance of the
    system. The main formula for Ohm’s Law is .
    In this lab, we connect a basic circuit and
    then we connected an ammeter and a volt meter to
    measure the current and the potential difference
    respectively. We used different amount of
    electricity or current that will be running through
    our circuit as well as the resistor of the system to
    illustrate, demonstrate, and see the relationship
    between potential difference (voltage), current,
    and resistance.
    Objective
    - Be able to determine Mathematical
    relationship between current, potential
    difference, and resistance in a simple
    circuit.

    - Be able to use Voltmeter and


    Ammeter.

    - Be able to connect the circuit


    correctly.

    - To understand the symbol in the


    circuit.
    Materials

    2 multimeters Lab quest

    wire with clips 2 resistors of different resistance

    Power Amplifier
    Procedure
    1. With the power amplifier turned off, connect the circuit
    as shown in figure. Then set current range and voltage
    range as the data. NOTE: Attach the red connectors
    electrically closer to the positive side of the power
    supply.
    2. Have Lab Tech/TA check the arrangement of the
    wires before proceeding.
    3. Turn on the switch. Adjust/increase the output voltage
    of the power amplifier from2.0 V to 10.0V in steps of 2.0
    V as indicated in the table1. Record the corresponding
    reading due to the voltmeter and ammeter on 2nd and
    3rd column respectively.
    4. Repeat the process until you finish all of the 5 runs.
    5. Compute for the value of the resistance by dividing the
    voltmeter reading to the ammeter reading.
    6. Compare this computed value of the resistance with
    the true value of the resistor used in the circuit.
    7. Turn the power amplifier off then replace the first
    resistor with the second resistor.
    8. Ask Lab Tech/ TA to recheck your circuit connection
    before proceed.
    9. Turn on the power amplifier again and repeat steps 1-
    6 using the second resistor
    CAUTION: Change the ammeter’s current range
    accordingly.
    Data & Result
    Analysis
    By connecting the circuit completely are connected
    correctly, the current will flow through the wire. Current is
    directly proportion to voltage and inversely proportion to
    resistor. As we used more resistor, the current was decreased
    because it resists the flow of the current more. Ammeter
    should be connected in series and set to be less resisted as
    possible, so the current can flow through them with as less
    effect as possible. On the other hand, voltmeter should be
    connected in parallels and have as much resistance as
    possible, so the current would not flow through the meter. This
    is the explanation of why there are some errors in the lab.
    There are internal resistances from meters which are
    negligible in the computed one.

    Conclusion
    To conclude, Ohm’s law is used to calculate the resistance
    in this experiment as we have potential, from voltmeter
    and current, from ammeter by using V=IR.
    Recommendation
    If we have a chance to do this
    experiment again, we will make sure and
    check that all of the equipment and
    things that we will be using are working
    properly because we had some issues due
    to equipment malfunctioned.
    Work log
    Mill

    - Decoration - Materials

    - Objective - Procedure

    Nont

    - Introduction - Recommendation
    - Data & Result

    Gun

    - Conclusion - Calculation
    - Analysis

    You might also like