Earth Moving Equipment Function and Standard Productivity
Earth Moving Equipment Function and Standard Productivity
Earth Moving Equipment Function and Standard Productivity
CategoriesPROJECT MANAGEMENT
Comments3 COMMENTS
Earth moving Equipment are used in the construction projects, in order to prepare a plan and time schedule for such activities you should be
aware of different types of Earth moving Equipment and the productivity for each Equipment (how much cubic meter of soil can be moved
or excavated in a certain amount of time or how fast material can be transported).
•The blade is used to push, shear, cut, and roll material ahead of the tractor. It is
•Each model of bulldozer has an operating range for blade size and adjustment.
•A larger machine can pitch and tilt deeper than a smaller machine typically.
•For heavy civil work, bulldozer blade widths can range from 80 to 220 and operating weights can range from about 7 tons to over 120 tons.
Excavating only & haul in pile by dozer 75 HP (Horse Power), 15 meters haul, common earth 38.4 m3 / hour
Excavating only & haul in pile by dozer 75 HP (Horse Power), 15 meters haul, clay earth 27 m3 / hour
2 FRONT-END LOADERS:
RONT-END LOADER
•Front-end loaders typically are tractor powered and operate on tires. They are typically articulated and very maneuverable, making them ideal
for constricted areas.
• They are used primarily for material moving and re-handling. They are ideal for scooping and hauling materials in storage piles, where it is
to be permanently placed, or loading it into dump trucks.
•Loaders are ideal for dumping soil back into the hole after the necessary below grade work is done.
•The need for a smooth stable travel surface has always been an important part of a road system.
• Another name for a motor grade is ‘‘maintainer,’’ This name is appropriate because this equipment is typically used to maintain grade and
a smooth surface for rural non paved travel roads or haul routes on construction sites.The blade is used to push dirt straight ahead or to the
side at a desired level. The gradercanbe used for light surface excavation, but is mainly used to move soil to create a level surface.
•They are basically a tractor and a trailer with sides. Like the rest of the equipment categories, there are a wide range of trucks based on
hauling conditions and need. Typically trucks are sized by trailer volume. Obviously, the larger and heavier the load, the larger a tractor you
need to pull the trailer.
•Trucks are typically used with excavators and loaders for excavation and soil haul off or delivery. Compared to other earth moving equipment,
they can obtain high travel speeds. Rough terrain trucks have frames, suspension systems, and motors designed to traverse rough surfaces and
radical travel grades.
•Trucks designed for hauling on the highway are designed for less rigorous conditions.
•Two basic considerations for choosing a truck trailer are the method of dumping and the class of material hauled.
•Trucks may dump from the rear (the most common), from the bottom (belly dump), or from the side depending on the type of material and
work activity.
•Common rear dump trucks are typically not articulated, but larger rough terrain trucks are typically articulated for greater maneuverability