Anexo 4: Fig. 8: Desplazamiento Por La Primera Resonancia de La Estructura

ANEXO 4
Fig. 8: Desplazamiento por la primera resonancia de la estructura.
Fig. 9: Desplazamiento por la primera resonancia de la estructura a nueve veces su escala

real.
Fig. 10: Desplazamiento por la segundo resonancia de la estructura a nueve veces su
escala real.
Fig. 11: Desplazamiento por la tercera resonancia de la estructura a nueve veces su escala
real.
Fig. 12: Desplazamiento por la cuarta resonancia de la estructura a nueve veces su escala
real.
Fig. 13: Desplazamiento por la quinta resonancia de la estructura a nueve veces su escala
real.
RESUMEN DE INFORMACIÓN DEL PROCESO DE CÁLCULO EN EL SOFTWARE

Design Analysis
Project created on DateTime no válido..

Last updated on 24/11/2007.
Project checked on 24/11/2007.
Summary
Model Information
Analysis Type - Static Stress with Linear Material Models
Units - Custom - (N, mm, s, deg C, K, V, ohm, A, J)
Model location - D:\IVAN\ALGOR\CURSO 2007\tesis\Estructura\Estructura_Frec
Analysis Parameters Information

Load Case Multipliers
Static Stress with Linear Material Models may have multiple load cases. This allows
a model to be analyzed with multiple loads while solving the equations a single time.
The following is a list of load case multipliers that were analyzed with this model.
Load Pressure/Surface Displaced
Acceleration/Gravity Thermal Voltage
Case Forces Boundary
1 0 1 0 0 0
Gravity Information
The following lists the values used if acceleration or gravity was included in the
analysis. The Acceleration/Gravity direction multiplier is multiplied by the
Acceleration Due To Body Force which is then multiplied by the
Acceleration/Gravity load case multiplier.
Acceleration Due To Body Force = 9814.56 mm/s²
Acceleration/Gravity X Acceleration/Gravity Y Acceleration/Gravity Z

Multiplier Multiplier Multiplier
0 0 -1
Multiphysics Information
Default Nodal Temperature 0 °C
Source of Nodal Temperature None
Time step from Heat Transfer Analysis Last
Processor Information
Type of Solver Sparse
Disable Calculation and Output of Strains No
Calculate Reaction Forces No
Invoke Banded Solver Yes
Avoid Bandwidth Minimization No
Stop After Stiffness Calculations No
Displacement Data in Output File No
Stress Data in Output File No
Equation Numbers Data in Output File No
Element Input Data in Output File No
Nodal Input Data in Output File No
Centrifugal Load Data in Output File No
Part Information
Part ID Part Name Element Type Material Name
1 Part 1 Beam Steel (ASTM-A36)
Element Properties used for:
 Part 1
Element Type Beam

Section 1 - Area 339.99932
Section 1 - SA2 0
Section 1 - SA3 0
Section 1 - J1 2913.6199792
Section 1 - I2 45785.456816
Section 1 - I3 45785.456816
Section 1 - S2 1704.254656
Section 1 - S3 1704.254656
 Part 2
Element Type Beam

Section 1 - SA2 0
Section 1 - SA3 0
Section 1 - J1 416.2314256
Section 1 - I2 9157.0913632
Section 1 - I3 9157.0913632
Section 1 - S2 507.998984
Section 1 - S3 507.998984
 Part 3
Element Type Beam

Section 1 - SA2 0
Section 1 - SA3 0
Section 1 - J1 23700
Section 1 - I2 11850
Section 1 - I3 11850
Section 1 - S2 894.3
Section 1 - S3 894.3
Material Information
Steel (ASTM-A36)
Material Model Standard

Material
Algor Material Library
Source
Material
C:\ARCHIV~1\ALGOR\MatLibs\algormat.mlb
Source File
Date Last
1999/06/02-11:03:56
Updated
Material Structural Steel Mechanics of Materials, 2nd Edition, F.P. Beer and
Description E.R. Johnston, Jr. (mechanical)
Mass Density 0.0000000078548 N*s^2/mm/mm³
Modulus of
199950 N/mm²
Elasticity
Poisson's Ratio 0.29
Load and Constraint Information

Constraints
Constraint Set 1: Unnamed
Nodal Boundary Conditions
Node
ID Description Tx Ty Tz Rx Ry Rz
ID
9 Unnamed 38 No Yes Yes No No No
Processor Output
Processor Summary
ALGOR (R) Static Stress with Linear Material Models

Version 12.32-WIN 27-JUN-2003
Copyright (c) 1984-2003 ALGOR, Inc. All rights reserved.
DATE: NOVEMBER 24,2007

TIME: 11:44 AM
INPUT MODEL: D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Frec
ALG.DLL VERSION:13240000
-------------------------------------------------
Structural
1**** CONTROL INFORMATION
number of node points (NUMNP) = 51

number of element types (NELTYP) = 3
number of load cases (LL) = 1
number of frequencies (NF) = 0
analysis type code (NDYN) = 0
equations per block (KEQB) = 0
bandwidth minimization flag (MINBND) = 0
gravitational constant (GRAV) = 9.8146E+03
**** PRINT OF NODAL DATA SUPPRESSED

**** PRINT OF EQUATION NUMBERS SUPPRESSED
**** PRINT OF TYPE-2 ELEMENT DATA SUPPRESSED
**** Hard disk file size information for processor:
Available hard disk space on current drive = 17682.762

megabytes
1**** ELEMENT LOAD MULTIPLIERS
load case case A case B case C case D

case E
--------- ---------- ---------- ---------- ---------- -----
-----
1 0.000E+00 1.000E+00 0.000E+00 0.000E+00

0.000E+00
**** Invoking Sparse Solver ...
**** Symbolic Assembling Using the Row-Hits Matrix Profile ...

**** Assembled in One Block.
**** Real Sparse Matrix Assembly ...
1**** STIFFNESS MATRIX PARAMETERS
minimum non-zero diagonal element = 3.1202E+02

maximum diagonal element = 1.3316E+09
maximum/minimum = 4.2677E+06
average diagonal element = 1.1188E+08
in the upper off-diagonal matrix:

number of entries in the profile = 3678
number of symbolic nonzero entries= 2643
number of real nonzero entries = 724
**** Sparse Matrix Assembled in One Block
**** Load case 1
**** Sparse Matrix Factorization ...
Completing in-core sparse solution
**** Sparse Matrix Solving ...
**** End Sparse Matrix Solution
Reaction Sums and Maxima for Load Case 1
Sum of applied forces

X-Force Y-Force Z-Force X-Moment Y-Moment
Z-Moment
0.0000E+00 0.0000E+00 -4.0025E+02 0.0000E+00 0.0000E+00
0.0000E+00
Sum of reactions
Z-Moment
1.0658E-14 8.8818E-15 -5.3291E-15 -1.6984E-09 -1.7974E-09 -
9.2712E-11
Sum of residuals
Z-Moment
1.0658E-14 8.8818E-15 -4.0025E+02 -1.6984E-09 -1.7974E-09 -
9.2712E-11
Sum of unfixed direction residuals

Z-Moment
1.0658E-14 3.4016E-11 -1.2012E-09 -1.6984E-09 -1.7974E-09 -
9.2712E-11
Largest applied forces and moments

Node Node Node Node Node
Node
Z-Moment
0 0 6 0 0
0
0.0000E+00 0.0000E+00 -2.8989E+01 0.0000E+00 0.0000E+00
0.0000E+00
Largest nodal reactions

Node
Z-Moment
4 41 41 14 4
14
3.7322E-11 -2.3547E+01 -1.2902E+02 1.5116E-09 -3.1199E-10
1.2142E-10
Largest nodal residuals

Node
Z-Moment
4 41 41 14 4
14
3.7322E-11 -2.3547E+01 -1.3175E+02 1.5116E-09 -3.1199E-10
1.2142E-10
Largest unfixed direction residuals

Node
Z-Moment
4 24 36 14 4
14
3.7322E-11 5.6048E-11 -5.4037E-10 1.5116E-09 -3.1199E-10
1.2142E-10
1**** TEMPORARY FILE STORAGE (MEGABYTES)

----------------------------------
UNIT NO. 7 : 0.002
UNIT NO. 8 : 0.002
UNIT NO. 9 : 0.000
UNIT NO. 10 : 0.000
UNIT NO. 11 : 0.004
UNIT NO. 12 : 0.002
UNIT NO. 13 : 0.002
UNIT NO. 14 : 0.000
UNIT NO. 15 : 0.000
UNIT NO. 17 : 0.000
UNIT NO. 51 : 0.004
UNIT NO. 52 : 0.060
UNIT NO. 54 : 0.001
UNIT NO. 55 : 0.003
UNIT NO. 56 : 0.006
UNIT NO. 58 : 0.002
TOTAL : 0.088 Megabytes
Processor Log
ALGOR (R) Static Stress with Linear Material Models

Structural
51 3 1 0 0 0
**** Linear stress analysis
**** Memory Dynamically Allocated = 261528 KB
Options executed are:
NOMIN
STRAIN
SPARSE
SUPCNF
SUPELM
SUPNOD
REAC
ENOR
processing ...
**** OPENING TEMPORARY FILES

NDYN = 0

TIME: 11:44 AM
**** BEGIN NODAL DATA INPUT

51 NODES
**** END NODAL DATA INPUT
**** BEGIN TYPE-2 DATA INPUT
35 ELEMENTS
**** END TYPE-2 DATA INPUT
18 ELEMENTS
4 ELEMENTS

megabytes
**** BEGIN LOAD INPUT

Load factor = 1.00E+00 in the 2nd basket in load case 1
**** END LOAD INPUT
**** Invoking Sparse Solver ...

**** Load case 1
**** Sparse Matrix Factorization ...
**** BEGIN DISPLACEMENT OUTPUT

**** PRINT OF DISPLACEMENT OUTPUT SUPPRESSED
**** END DISPLACEMENT OUTPUT
**** BEGINNING REACTION COMPUTATIONS
**** LOADCASES REMAINING 1
**** BLOCKS REMAINING 1
**** GROUPS REMAINING 3
**** GROUP USED--ELEMENT/GLOBAL CONTRIBUTIONS
35 ELEMENTS
35 ELEMENTS REMAINING
18 ELEMENTS
4 ELEMENTS
**** ENDING REACTION COMPUTATIONS
Estructura_Frec.t7 = 2.055 kilobytes

total temporary disk storage (megabytes) = .08820
Estructura_Frec.l = 5.769 kilobytes

Estructura_Frec.do = 2.438 kilobytes
**** BEGIN DELETING TEMPORARY FILES

Processing completed for model:
[D:\IVAN\ALGOR\CURSO 2007\tesis\Estructura\Estructura_Frec]
**** TEMPORARY FILES DELETED
**** END OF SUCCESSFUL EXECUTION
Total actual hard disk space used = 0.096 megabytes
Sub-total elapsed time = 0.012 minutes

ALGOR (R) Stress Calculation Utility
Version 12.16-WIN 25-APR-2003
**** Memory Dynamically Allocated = 261528 KB

Percent capacity: .005828

TIME: 11:44 AM
INPUT......D:\IVAN\ALGOR\CURSO
35 ELEMENTS
0 elements remaining
18 ELEMENTS
4 ELEMENTS
**** Writing stress and strain output files ...
0 load cases remaining
**** Hard disk file size information for postprocessor:
Estructura_Frec.son = 10.098 kilobytes
Estructura_Frec.nso = 4.531 kilobytes
Estructura_Frec.sto = 4.531 kilobytes
Total MKNSO disk space used = 0.01871 megabytes

**** End of successful execution
**** MKNSO elapsed time = 0.001 minutes
**** The TOTAL elapsed time = 0.013 minutes
Stress Analysis
The stress analysis output file (D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Frec.S) was not found.
Weight and Center of Gravity Analysis

The weight and center of gravity analysis output file (D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Frec.WCG) was not found.
ALGOR (R) Natural Frequency (Modal)
DATE: DECEMBER 6,2007

TIME: 08:50 AM
-------------------------------------------------
Structural
1**** CONTROL INFORMATION
number of node points (NUMNP) = 47

number of element types (NELTYP) = 2
number of load cases (LL) = 1
number of frequencies (NF) = 5
analysis type code (NDYN) = 1
equations per block (KEQB) = 0
gravitational constant (GRAV) = 9.8146E+03
**** PRINT OF NODAL DATA SUPPRESSED

**** PRINT OF EQUATION NUMBERS SUPPRESSED
**** EQUATION PARAMETERS

total number of equations = 228
bandwidth = 222
number of equations in a block = 114
number of blocks = 2
blocking memory (kilobytes) = 267804
available memory (kilobytes) = 267804

megabytes
**** Invoking Sparse Eigensolver ...

1**** STIFFNESS MATRIX PARAMETERS
minimum non-zero diagonal element = 2.6938E+03

maximum diagonal element = 1.3316E+09
maximum/minimum = 4.9432E+05
average diagonal element = 1.1830E+08

**** SOLUTION SOUGHT FOR FOLLOWING EIGENPROBLEM
number of equations = 228

number of eigenvalues required = 5
rigid body modes ( 0 for none) = 0

1**** PRINT OF NATURAL FREQUENCIES
mode circular
number frequency frequency period
(rad/sec) (Hertz) (sec)
------ ----------- ----------- -----------
1 1.5582E+02 2.4800E+01 4.0322E-02

2 1.9842E+02 3.1579E+01 3.1667E-02
3 2.4813E+02 3.9492E+01 2.5322E-02
4 3.1947E+02 5.0845E+01 1.9667E-02
5 3.6597E+02 5.8246E+01 1.7169E-02
1**** TEMPORARY FILE STORAGE (MEGABYTES)

----------------------------------
UNIT NO. 7 : 0.009
UNIT NO. 8 : 0.002
UNIT NO. 9 : 0.002
UNIT NO. 10 : 0.000
UNIT NO. 11 : 0.003
UNIT NO. 12 : 0.000
UNIT NO. 13 : 0.002
UNIT NO. 14 : 0.000
UNIT NO. 15 : 0.000
UNIT NO. 54 : 0.001
UNIT NO. 55 : 0.002
UNIT NO. 56 : 0.005
UNIT NO. 58 : 0.002
TOTAL : 0.028 Megabytes

Anexo 4: Fig. 8: Desplazamiento Por La Primera Resonancia de La Estructura

Uploaded by

Copyright:

Available Formats

Anexo 4: Fig. 8: Desplazamiento Por La Primera Resonancia de La Estructura

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Anexo 4: Fig. 8: Desplazamiento Por La Primera Resonancia de La Estructura

Uploaded by

Copyright:

Available Formats

ANEXO 4

Fig. 8: Desplazamiento por la primera resonancia de la estructura.

Fig. 9: Desplazamiento por la primera resonancia de la estructura a nueve veces su escala

RESUMEN DE INFORMACIÓN DEL PROCESO DE CÁLCULO EN EL SOFTWARE

Project created on DateTime no válido..

Project checked on 24/11/2007.

Analysis Parameters Information

Acceleration Due To Body Force = 9814.56 mm/s²

Acceleration/Gravity X Acceleration/Gravity Y Acceleration/Gravity Z

Element Properties used for:

Element Type Beam

Element Properties used for:

Element Type Beam

Element Properties used for:

Element Type Beam

Material Model Standard

Load and Constraint Information

Nodal Boundary Conditions

ALGOR (R) Static Stress with Linear Material Models

DATE: NOVEMBER 24,2007

1**** CONTROL INFORMATION

number of node points (NUMNP) = 51

**** PRINT OF NODAL DATA SUPPRESSED

Available hard disk space on current drive = 17682.762

1**** ELEMENT LOAD MULTIPLIERS

load case case A case B case C case D

1 0.000E+00 1.000E+00 0.000E+00 0.000E+00

**** Invoking Sparse Solver ...

**** Symbolic Assembling Using the Row-Hits Matrix Profile ...

1**** STIFFNESS MATRIX PARAMETERS

minimum non-zero diagonal element = 3.1202E+02

in the upper off-diagonal matrix:

Reaction Sums and Maxima for Load Case 1

Sum of applied forces

Sum of unfixed direction residuals

Largest applied forces and moments

Largest nodal reactions

Largest nodal residuals

Largest unfixed direction residuals

1**** TEMPORARY FILE STORAGE (MEGABYTES)

TOTAL : 0.088 Megabytes

ALGOR (R) Static Stress with Linear Material Models

Options executed are:

**** OPENING TEMPORARY FILES

DATE: NOVEMBER 24,2007

**** BEGIN NODAL DATA INPUT

Available hard disk space on current drive = 17682.762

**** BEGIN LOAD INPUT

**** Invoking Sparse Solver ...

**** Symbolic Assembling Using the Row-Hits Matrix Profile ...

**** BEGIN DISPLACEMENT OUTPUT

Estructura_Frec.t7 = 2.055 kilobytes

total temporary disk storage (megabytes) = .08820

Estructura_Frec.l = 5.769 kilobytes

**** BEGIN DELETING TEMPORARY FILES

Total actual hard disk space used = 0.096 megabytes

Sub-total elapsed time = 0.012 minutes

**** Memory Dynamically Allocated = 261528 KB

DATE: NOVEMBER 24,2007