Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

2N3440 Multicomp

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

High Voltage Transistor

Pin Configuration
1. Emitter
2. Base
3. Collector

Features:
•  NPN High Voltage Silicon Transistor
•  High Voltage Silicon Planar Transistors used in High Voltage and
High Power Amplifier Applications

Absolute Maximum Ratings:


(Ta = 25°C unless otherwise specified)
Characteristic Symbol Value Unit
Collector Base Voltage VCBO 300
Collector-Emitter Voltage VCES 250 V
Emitter-Base Voltage VEBO 7
Collector Current Continuous IC 1
A
Base Current IB 0.5
Power Dissipation at Ta = 25°C 1
Derate above 25°C 5.7 W
PD
Power Dissipation at TC = 25°C 5 mW/°C
Derate above 25°C 28.6
Operating Temperature TJ 200
°C
Storage Temperature Range Tstg -65 to +200
Thermal Resistance
Junction to Ambient Rth(j-a) 175
°C/W
Junction to Case Rth(j-c) 35

www.element14.com
www.farnell.com
www.newark.com

Page <1> 19/10/12 V1.0


High Voltage Transistor
Electrical Characteristics:
(Ta = +25°C unless otherwise specified)

Parameter Symbol Test Condition Unit

Collector-Emitter Voltage VCEO(sus)* IC = 50mA, IB = 0 250 V

ICBO VCB = 250V, IE = 0 <20


Collector-Cut off Current ICEO VCE = 200V, IB = 0 <50
µA
ICEX VCE = 300V, VBE = 1.5V <500
Emitter-Cut off Current IEBO VEB = 6V, IC = 0 <20
DC Current Gain hFE* IC = 20mA, VCE = 10V 40 - 160 -
Collector Emitter Saturation Voltage VCE(sat)* IC = 0.05A, IB = 4mA <0.5
V
Base Emitter Saturation Voltage VBE(Sat)* IC = 50mA, IB = 4mA <1.3
Small Signal Characteristics
Small Signal Current Gain hfe IC = 5mA, VCE = 10V, f = 1kHz >25 -
Output Capacitance Cob VCB = 10V, IE = 0, f = 1MHz <10
pF
Input Capacitance Cib VEB = 5V, IC = 0, f = 1MHz <75
Current Gain-Bandwidth Product ft IC = 10mA, VCE = 10V, f = 5MHz >15 MHz
Real Part of Input impedance Re(hie) VCE = 10V, IC = 5mA, f = 1MHz <300 Ω
*Pulse Test: Pulse Width = 300μs, Duty Cycle = 2%
Dim. Min. Max.
A 8.5 9.39
TO-39 Metal Can Package
B 7.74 8.5
C 6.09 6.6
D 0.4 0.53
E - 0.88
F 2.41 2.66
G 4.82 5.33
H 0.71 0.86
J 0.73 1.02
K 12.7 -
L 42° 48°

Dimensions : Millimetres
Pin Configuration
1. Emitter Part Number Table
2. Base Description Part Number
3. Collector Transistor, NPN, TO-39 2N3440

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.

www.element14.com
www.farnell.com
www.newark.com

Page <2> 19/10/12 V1.0

You might also like