Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
272 views

Simple Shear Connection Design

1) The software summarizes the capacity of a shear connection between a W24x131 beam and column. 2) The connection uses 4 bolts and 240mm of welding, and the software checks the capacities of the bolted and welded portions. 3) The software verifies that the connection capacities exceed the shear demand of 242.11 kN and that the geometry meets specified checks.

Uploaded by

Elvin Sandajan
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
272 views

Simple Shear Connection Design

1) The software summarizes the capacity of a shear connection between a W24x131 beam and column. 2) The connection uses 4 bolts and 240mm of welding, and the software checks the capacities of the bolted and welded portions. 3) The software verifies that the connection capacities exceed the shear demand of 242.11 kN and that the geometry meets specified checks.

Uploaded by

Elvin Sandajan
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SHEAR CONNECTION DESIGN SOFTWARE (LRFD)- Welded & Bol

(Created by Engr. Melchor Jan R. Cañete)-6/26/2013

DATA INPUT: CAPACITY SUMMARY:


Profile= W24x131 Beam D= 622mm 1.) Connection to Beam Web:(neglecting ecc
tw= 15.24 mm 1.1)Vcap=
Fastener 1.2)D/C Ratio=
m 2.) Connection to Column Flange (with eccen
ex= 2.25 inches (eccentricity) 2.1)Vcap=
f= 0.75 (reduction factor) 2.2)D/C Ratio=
Metal Property: 3.) Framing Angles thickness:
Beams 3.1)D/C Ratio=
Framing Angles 4.) End & Edge Distances=
Framing Angles thickness = 0.75 inch/inches 5.) Minimum Bolt Spacing=
Shear Force Demand = 242.11 kN 6.) Framing Angles Length=
Ø Bolt= 0.75 inch= 20mm 7.) Weld:
n bolts= 4 PCS 7.1)Weld Capacity=
Length of Weld= 240 mm 7.2)D/C Ratio=
Weld throat= 10 mm 8.) Geometry Check:
Electrode Ok! Framing Angle does not exceed beam de
Ok! Weld Length does not exceed frame angl
TYPICAL DETAIL DIAGRAM:
)- Welded & Bolted
13

eam Web:(neglecting eccentricity) 1ksi


707.46 kN 1kN
0.342 Adequate!
olumn Flange (with eccentricity)
530.59 kN
0.46 Adequate!

0.63 Adequate!
30 mm
60 mm
240 mm

167.67 MPa
0.646 Adequate!

e does not exceed beam depth


does not exceed frame angle length!
###

###

Fv=0.27xFt

You might also like