Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Design of Inlet Chamber

    Uploaded by

    Raju Saini
    This document provides the design details of a two-way slab according to IS 456-2002. Key details include: - The slab has dimensions of 3.15m x 5.15m with a depth of 200mm - Loads on the slab include self-weight, floor finish, and total load of 33.5kN/m^2 - Reinforcement is 10mm diameter bars at 125mm spacing - Flexural design shows moments of 30.3kNm and 23.02kNm requiring bar areas of 497.69mm^2 and 371.28mm^2 respectively - Crack width calculation per IS 3370-2021 results in a crack width of 0.178747

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Design of Inlet Chamber

    Uploaded by

    Raju Saini
    29 views2 pages
    This document provides the design details of a two-way slab according to IS 456-2002. Key details include: - The slab has dimensions of 3.15m x 5.15m with a depth of 200mm - Loads on the slab include self-weight, floor finish, and total load of 33.5kN/m^2 - Reinforcement is 10mm diameter bars at 125mm spacing - Flexural design shows moments of 30.3kNm and 23.02kNm requiring bar areas of 497.69mm^2 and 371.28mm^2 respectively - Crack width calculation per IS 3370-2021 results in a crack width of 0.178747

    Original Title

    DESIGN OF INLET CHAMBER

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the design details of a two-way slab according to IS 456-2002. Key details include: - The slab has dimensions of 3.15m x 5.15m with a depth of 200mm - Loads on the slab include self-weight, floor finish, and total load of 33.5kN/m^2 - Reinforcement is 10mm diameter bars at 125mm spacing - Flexural design shows moments of 30.3kNm and 23.02kNm requiring bar areas of 497.69mm^2 and 371.28mm^2 respectively - Crack width calculation per IS 3370-2021 results in a crack width of 0.178747

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    29 views2 pages

    Design of Inlet Chamber

    Uploaded by

    Raju Saini
    This document provides the design details of a two-way slab according to IS 456-2002. Key details include: - The slab has dimensions of 3.15m x 5.15m with a depth of 200mm - Loads on the slab include self-weight, floor finish, and total load of 33.5kN/m^2 - Reinforcement is 10mm diameter bars at 125mm spacing - Flexural design shows moments of 30.3kNm and 23.02kNm requiring bar areas of 497.69mm^2 and 371.28mm^2 respectively - Crack width calculation per IS 3370-2021 results in a crack width of 0.178747

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    DESIGN OF TWO WAY SLAB as per IS456-2002

    ###
    Project Slab ID: S1 Date: ###
    ###
    Length of Shorter Span, Lx : 3.15 m Dimensions-meter Material
    Length of Longer Span Ly : 5.15 m Shorter, x 3 Conc. 25
    Overall depth of the Slab , D : 200 mm Longer, y 5 Steel 500
    Assumed Dia of main Bar : 10 mm
    Clear cover : 45 TWO WAY SLAB
    Effective depth of the slab, d : 150 mm
    ###
    Loads Value Unit Check for Deflection (456)
    Self weight : 5 kN/m2 Modification factor ast 1.85
    Floor Finish : 1.50 kN/m2 Modification factor asc 1
    Live Load : 0.00 kN/m2 L/d Ratio 26
    Partition wall : 0.00 kN/m2 Eff. Depth Required (mm) 65
    Other : 27.00 kN/m2 Overall Depth Required (mm) 115
    Total Load : 33.5 kN/m2
    O.K
    Factored Load : 50.25 kN/m2
    ###
    Support Conditon 2. One Short Edge Disc.
    ###
    Desing Moment Coefficients 2 Check For One Way Shear
    ly/lx -ax +ax -ay +ay 628 Fact. Shear Force 75.38 KN
    1.5 0.057 0.044 - - Shear Stress 0.54 N/mm2
    1.75 0.064 0.048 - - Actual Shear Stress 0.55 N/mm2
    1.63 0.061 0.046 0.037 0.028 OK

    Design for Flexure


    Ast Dia of Req.spacin spacing pt
    Moment Mu, kNm Mu/bd2 % pt Check
    mm2 rein bar g mm provided provided
    -Mx 30.30 1.35 0.33 497.69 10 158 125 0.42 OK
    +Mx 23.02 1.02 0.25 371.28 10 212 125 0.42 OK
    -My 18.45 0.82 0.20 284.62 10 276 125 0.42 OK
    +My 13.96 0.66 0.16 228.66 10 343 125 0.42 OK
    Check for Crack Width :- As per IS 3370-2021 (Part-II), ANNEX - B, Page - 12
    ###
    Given Data :-
    B.M. of the Section M = 23.02 KN-m
    Area of tension Reinforcement As = 628.32 mm2
    Width of the section at the centroid of the tension Reinf. b = 1000 mm
    Effective depth d = 150 mm
    Minimum Cover to longitudinal bar Cmin. = 45 mm
    Overall depth of member D = 200 mm
    Grade of Concrete fck = 25 N/mm2
    Grade of Steel fy = 500 N/mm2
    Diameter of Bar Used Ø= 10 mm
    Spacing of Main Reinforcement S= 125 mm
    modulus of elasticity of concrete Ec = = 12500.00 N/mm2
    5000x sqrt (fck)/1+ϴ) =
    modulus of elasticity of steel ( E s ) = = 200000 N/mm2
    Modular ratio ( m = Es/Ec) = 16.00
    Neutral Axis Depth (X) Eq. :-
    0.5 x b X2 = m Ast (d - X)
    0.5 x b X2 + m Ast X + - m Ast d = 0
    500 X +
    2
    10053.10 X + -2E+06 = 0
    X = 45.78 mm
    r = 104.22 mm
    Moment of Inertia of Cracked Section (I r) = 1.41E+08 mm4
    b x X /3 +m Ast r
    3 2

    fs = m (M r/Ir) = 271.85

    fs (D-x)
    e1 = x = 0.002011
    Es (d-x)

    1.5 x b x ( D - X)2
    e2 = = 0.00091
    3 x Es x As x (d - x)

    Average Surface Strain


    em = e1 - e1 = 0.001103

    (s/2)2 + ( Cmin + (Ø/2) )2 -Ø/2 = 75.04 mm


    acr =

    3 x acr x em
    Wcr = = 0.178747
    2 x ( acr - Cmin )
    1+
    (D-x) > 0.1 Unsafe

    You might also like