This document provides calculations for the design of two reinforced concrete lintel beams. The first beam is a 150mm thick beam inside a non-structural block wall with an opening width of 2m. The second beam is 200mm wide by 250mm deep spanning a reinforced concrete pit. Both beams are designed for bending moment, shear force, main reinforcement, and shear reinforcement if required.
This document provides calculations for the design of two reinforced concrete lintel beams. The first beam is a 150mm thick beam inside a non-structural block wall with an opening width of 2m. The second beam is 200mm wide by 250mm deep spanning a reinforced concrete pit. Both beams are designed for bending moment, shear force, main reinforcement, and shear reinforcement if required.
This document provides calculations for the design of two reinforced concrete lintel beams. The first beam is a 150mm thick beam inside a non-structural block wall with an opening width of 2m. The second beam is 200mm wide by 250mm deep spanning a reinforced concrete pit. Both beams are designed for bending moment, shear force, main reinforcement, and shear reinforcement if required.
This document provides calculations for the design of two reinforced concrete lintel beams. The first beam is a 150mm thick beam inside a non-structural block wall with an opening width of 2m. The second beam is 200mm wide by 250mm deep spanning a reinforced concrete pit. Both beams are designed for bending moment, shear force, main reinforcement, and shear reinforcement if required.
Wall Opening for Non-Structural RC Wall (Lintel Beam inside the Non-Structural Block Wall)
Max. Opening Width = 2 m
Gravity Load Part 1 - Weight of Non-Structural Wall Wall Height = 5.75 m (11.55mPD - 5.80mPD) Wall Thickness = 150 mm Wall Unit Weight = 24.5 kN/m3 Line Load = Unit Weight x Thickness x Height = 21.1 kN/m (Unfactored)
Part 2 - Feature on Wall
Feature on Wall = 6 kN/m (Unfactored)
Horizontal Load Impact Force = 1.5 kPa
Design Load UDL = 1.4DL + 1.6LL = 41.6 kN/m
Design Bending Moment, M = 13.9 kNm (wL2/12) Relevant Depth = 0.6 m
Ultimate Bending Moment = 14 kNm Effective Width = 0.15 m Max Length = 2 m
Ref. Design of Main Bar Output/Action
Concrete Strenght, fcu = 45 N/mm2
Steel Strenght, fy = 500 N/mm2 Beam Breath, B = 150 mm Beam Depth, D = 600 mm Cover, c = 45 mm Effective Depth, d = 547 mm Area of K' = 0.007 [ M / bd2 fcu ] Reinforcement z = d (0.5 + (0.25 - K/0.9)0.5) Provided = 543 mm As = 59 mm2 [ M / 0.87 fy z ] Min % Reinforcement for Tension = 117 mm2 Min % Reinforcement for Compression = 59 mm2
Ultimate Bending Moment = 9 kNm Effective Width = 0.2 m Max Length = 2 m
Ref. Design of Main Bar Output/Action
Concrete Strenght, fcu = 45 N/mm2
Steel Strenght, fy = 500 N/mm2 Beam Breath, B = 200 mm Beam Depth, D = 250 mm Cover, c = 45 mm Effective Depth, d = 197 mm Area of K' = 0.025 [ M / bd2 fcu ] Reinforcement z = d (0.5 + (0.25 - K/0.9)0.5) Provided = 191 mm As = 107 mm2 [ M / 0.87 fy z ] Min % Reinforcement for Tension = 65 mm2 Min % Reinforcement for Compression = 33 mm2
