DEVELOPMENT OF MAA SAMLESWARI AT SAMBALPUR

DESIGN OF SLAB - PILGRIM FACILITY

TWO WAY SLAB
1
1.1 DESIGN OF SLAB SLAB S1

Short span Lx = 3.02 m

Long span Ly = 3.02 m
Assumed slab thickness D = 0.125 m
Grade of concrete Fck = 25 N/mm2
Grade of reinforcement Fe = 500 N/mm2 SLAB S1
Clear cover to any reinforcement d' = 30 mm

1.2 Type of panel:

1.3 Loading: 3.02 m

Self weight of slab W1 = 3.13 kN/m 2

Roof finish W2 = 2.40 kN/m2
Live load W3 = 1.10 kN/m2
Miscellaneous (MEP) W4 = 0.00 kN/m2
Design Load with load factor of 1.5, Wu = 9.94 kN/m 2 3.02 m

Ratio of long span to short span, R = 1 Two Way Slab

1.4 Design:

Coeff BM Ast - (mm2) Dia Spacing (mm)

Short span direction % pt
Table 26 (kNm/m) Req Prov (mm) Req Prov
Negative moment at continuous edge 0.047 4.26 150.00 251.33 0.28 8 335 200
Positive moment at midspan 0.035 3.17 150.00 287.23 0.32 8 335 175

Ast - (mm2) Dia Spacing (mm)

Long span direction Coeff BM (kNm) % pt
Req Prov (mm) Req Prov
Negative moment at continuous edge 0.047 4.26 150.00 251.33 0.30 8 335 200
Positive moment at midspan 0.035 3.17 150.00 287.23 0.35 8 335 175

Min effective depth reqd dre = 35.14 mm dx = 91 dy = 83 mm

Clear cover to any reinforcement d' = 30.00 mm
Effective depth provided dpr = 91.00 mm Greater than 'min eff depth reqd' Hence Ok
Min reinforcement AsMin = 150.00 mm2
Limiting Moment Mulim = 27.53 kNm

1.5 Deflection check:

R/F provided at midspan along short direction = 287.23 mm2 % pt = 0.32 %

Stress in Rebar fs =0.58*fy*Ast (req) / Ast (pro) = 151.446 N/mm2
Modification factor (MF) = 2.0 As per Fig 4 of IS:456-2000
Type of slab for deflection check = Continuous
Basic span to effective depth ratio (l/d)basic = 26 As per Cl. No. 23.2.1 of IS:456-2000
(L/d)max = (l/d)basic x MF = 52.00
(Lx/dpr)actual = 33.1868 (l / d)max > (l / d)actual
Safe in Deflection' Hence Ok

1.6 Check for Shear:

Shear Force at the support Vu = (Wu*L/2) = 15.0056 kN/m

Nominal Shear Stress τv = Vu / (bdpr) = 0.1649 N/mm2
Concrete Shear Strength τc = 0.40331 From Table 19, IS:456-2000
k = 1.2 (Clause:40.2.1.1, IS:456-2000)
k τc = 0.48398 N/mm2
τv < k τc, No Need of Shear Reinforcement
 DEVELOPMENT OF MAA SAMLESWARI AT SAMBALPUR
DESIGN OF SLAB - PILGRIM FACILITY
TWO WAY SLAB
1
1.1 DESIGN OF SLAB SLAB S2

Short span Lx = 3.02 m

Long span Ly = 5.85 m
Assumed slab thickness D = 0.125 m
Grade of concrete Fck = 25 N/mm2
Grade of reinforcement Fe = 500 N/mm2 SLAB S2
Clear cover to any reinforcement d' = 30 mm

1.2 Type of panel:

1.3 Loading: 5.85 m

Self weight of slab W1 = 3.13 kN/m 2

Roof finish W2 = 2.40 kN/m2
Live load W3 = 1.10 kN/m2
Miscellaneous (MEP) W4 = 0.00 kN/m2
Design Load with load factor of 1.5, Wu = 9.94 kN/m 2 3.02 m

Ratio of long span to short span, R = 1.95 Two Way Slab

1.4 Design:

Coeff BM Ast - (mm2) Dia Spacing (mm)

Short span direction % pt
Table 26 (kNm/m) Req Prov (mm) Req Prov
Negative moment at continuous edge 0 0.00 150.00 251.33 0.28 8 335 200
Positive moment at midspan 0.087 7.89 208.88 335.10 0.37 8 241 150

Ast - (mm2) Dia Spacing (mm)

Long span direction Coeff BM (kNm) % pt
Req Prov (mm) Req Prov
Negative moment at continuous edge 0.045 4.08 150.00 251.33 0.30 8 335 200
Positive moment at midspan 0.035 3.17 150.00 251.33 0.30 8 335 200

Min effective depth reqd dre = 47.81 mm dx = 91 dy = 83 mm

Clear cover to any reinforcement d' = 30.00 mm
Effective depth provided dpr = 91.00 mm Greater than 'min eff depth reqd' Hence Ok
Min reinforcement AsMin = 150.00 mm2
Limiting Moment Mulim = 27.53 kNm

1.5 Deflection check:

R/F provided at midspan along short direction = 335.10 mm2 % pt = 0.37 %

Stress in Rebar fs =0.58*fy*Ast (req) / Ast (pro) = 180.77 N/mm2
Modification factor (MF) = 1.9 As per Fig 4 of IS:456-2000
Type of slab for deflection check = Simply supported
Basic span to effective depth ratio (l/d)basic = 20 As per Cl. No. 23.2.1 of IS:456-2000
(L/d)max = (l/d)basic x MF = 37.32
(Lx/dpr)actual = 33.1868 (l / d)max > (l / d)actual
Safe in Deflection' Hence Ok

1.6 Check for Shear:

Shear Force at the support Vu = (Wu*L/2) = 15.0056 kN/m

Nominal Shear Stress τv = Vu / (bdpr) = 0.1649 N/mm2
Concrete Shear Strength τc = 0.43057 From Table 19, IS:456-2000
k = 1.2 (Clause:40.2.1.1, IS:456-2000)
k τc = 0.51668 N/mm2
τv < k τc, No Need of Shear Reinforcement