Product Catalog
Product Catalog
Product Catalog
CATALOG
First brand - First in innovation
Dr. John Ellis gave birth to the petroleum industry’s first brand in
1866 when he poured his cylinder oil into the stuck valves of a large
V-shaped steam engine, freeing the valves to move more easily. Dr.
Ellis would soon register the name VALVOLINE as the world’s first
trademarked lubricant brand. Today, Valvoline® lubricants, chemicals
and car care products are manufactured, marketed and sold in more
than 140 countries by Ashland Consumer Markets, a commercial unit
of Ashland Inc.
Industry classifications
In Europe, the specifications of the Association des Constructeurs Européens d’Automobiles (e.g., ACEA A5/B5
for gasoline and diesel engines, and ACEA C1, C2, C3, C4 for catalyst compatible engines) and the American
Petroleum Institute (e.g., API SJ) are commonly used. These classifications signify that an engine oil meets the
minimum standards set by the industry.
In addition to the ACEA and API performance requirements, certain motor oils meet special vehicle requirements
such as the VW 502.00/505.00 for Volkswagen* engines or MB 229.3 for Mercedes-Benz* engines.
All Valvoline products exceed the required ACEA and API classifications. In addition, several products in our
ranges have been developed for specific vehicles/engine models. In these instances, Valvoline products exceed
the vehicle manufacturers’ performance specifications.
To choose a quality oil compatible with your engine you should always read your owner’s manual. Your car
manufacturer will quote ACEA and/or API classifications and will also mention if a specifically approved lubricant
is necessary.
Heavy Duty 17
motorcycle oils 21
2-stroke 21
4-stroke 23
Motorcycle fork oil 23
transmission oils 25
Gear oils 26
Automatic transmission FLUIDS 30
OTHER LUBRICANTS 32
Greases 32
MARINE & AGRICULTURAL OILS 34
Industrial lubricants 35
Lawnmower oil /Chainsaw oil/ 36
BAR & CHAIN LUBE 36
Outboard oils 37
AUTOMOTIVE &
Heavy Duty CHEMICALS COOLANTS/ANTIFREEZE 39
MaxLife Coolant AF 40
Valvoline Coolant AF ExtremE 40
Valvoline Coolant AF ExtrA 41
Valvoline Coolant AF BS 6580 41
HD EXTENDED LIFE 42
Engine Flush 49
Engine Stop Leak 49
Oil treatment 49
CONTENT
VALVOLINE PROFESSIONAL SERIES® FUEL TREATMENTS 51
content
SynPower® Fuel System CleanerS 51
MaxLife® Fuel System CleaneRS 52
COOLING TREATMENTS 53
Radiator Flush 53
ENGINE FLUSH 53
VPS HD 55
Engine Cleaner 57
CARBURETTOR Cleaner 57
Brake Cleaner 57
Clean Tronic 57
Lubricating 58
Silicone Spray 58
Penetrating Oil 58
White Grease 58
High Pressure Lubricant + PFTE 58
Multi spray 1299WD 58
appearance 59
Cockpit Spray 59
Glass Cleaner 59
ProShine Wax 59
specialty 60
Motor Start 60
Copper Spray 60
Zinc Spray 60
tectyl® bodysafe 62
tectyl ml 62
TECTYL GLASHELDER/KLAR 62
TECTYL MOTOR KONSERVERING 62
tectyl 190 grey/black 63
tectyl multi purpose/506 WD 63
tectyl amber 63
tectyl superwax 63
lubricants
Performance Levels/
Approvals > Performance Levels/ Performance Levels/
SynPower XL-III 5W-30 Approvals > Approvals >
Meets all the engine test
requirements of ACEA C3
SynPower MST 5W-30 SynPower ENV C2 5W-30
API SM/CF, ACEA A3/ B4-04, API SM/CF, ACEA A5/
Meets all the engine protection
C3-04, MB Approval 229.31, B5-04, C2-04
requirements of ACEA C2,
229.51, BMW LL-04, Please check owners manual
ACEA A3/B4-04, BMW LL-04,
VW 502.00, 505.00, 505.01 before use for the following:
MB Approval 229.31 & 229.51
Citroen*, Honda*, Peugeot*,
VW 504.00, 507.00
Renault*, Toyota*
Performance Levels/
Performance Levels/ Approvals > SynPower
Approvals > SynPower 0W-40, 5W-30, 5W-40
MXL 0W-30, 5W 30 API SJ/SM/CF, MB Approval
API SL/CF, ACEA A3/ Performance Levels/ 229.1, 229.3, VW 502.00,
B3/B4, MB Approval 229.3, Approvals > SynPower 505.00, 505.01,
229.5 (5W-30), FE 0W-30 BMW LL-98/LL-01, Porsche*,
VW 502.00/505.00/503.01, API SL/SJ/CF, ACEA A1/B1-04, GM LL-A.025/B-025 (0W-40 &
BMW LL-01 ACEA A5/B5-04, Volvo 5W-30), BMW LL-01 (5W-30)
010
MaxLife MaxLife
Synthetic 5W-4O FE 5W-3O
>> Full synthetic engine oil >> Synthetic blend engine oil
>> Enhanced cold start >> Improved fuel efficiency
protection >> Meets Ford’s specifications
Performance Levels/
Approvals >
MaxLife Synthetic 5W-40
API SL/CF, ACEA A3-02, B3-98 Performance Levels/
Issue 2, B4-02, API SM/CF, Approvals >
ACEA A3/B4. Recommended MaxLife FE 5W-30
for use in applications where API SJ, ACEA A1-02, B1-02,
VW 502.00, 505.00 or A5-02, Recommended for use
MB Approval 229.1, 229.3 in applications where Ford
are specified M2C-913 A or B are specified
011
MaxLife MaxLife
10W-4O Diesel 10W-40
>> Synthetic blend engine oil >> Improved soot control for
>> TÜV Nord* Certified diesel engines
Performance Levels/
Approvals > Performance Levels/
MaxLife 10W-40 Approvals >
API SL/CF, ACEA A3-02, MaxLife Diesel 10W-40
B4-04, B3-98 Issue 2, API CF, ACEA B3-98 Issue 2,
TUV Nord Certified B4-04
012
013
DuraBlend DuraBlend
10W-4O Diesel 10W-4O
>> Synthetic blend engine oil >> For diesel engines
>> Recommended for Direct
Injection diesel engines
Performance Levels/
Approvals > Performance Levels/
DuraBlend 10W-40 Approvals >
API SL/CF, ACEA A3/ B4-04, DuraBlend Diesel 10W-40
MB Approval 229.1, API CF, ACEA B3/ B4-04,
VW 501.01 (2005-03), 505.00 MB Approval 229.1,
(1/97), Renault RN0700 505.00 (1/97)
VR1
RACING
014
VR1 Racing
5W-50 Full Synthetic,
10W-60 Synthetic Blend,
20W-50 Mineral
015
Turbo Diesel Turbo
10W-40, 15W-40, 10W-40,
15W-50, 20W-50 15W-40
>> High performance >> Added strength for diesel
conventional engine oil applications
For passenger cars and light trucks (vans) with gasoline and naturally aspirated diesel engines, Valvoline
motor oils are formulated with enhanced additives to help keep engines clean and provide quality
protection under all driving conditions. The balanced properties provide easy starting and optimum
lubrication over a wide range of operating temperatures.
10W-40
Performance Levels/
Approvals > Performance Levels/
ProFleet LS 10W-40 Approvals >
Performance Levels/ ProFleet 10W-40
ACEA E6-04, E7-04, E4-99
Issue 3, DAF* MX engines, MAN Approvals > ACEA E4-07, E7-04 Issue 2,
3477, 3277 for CRT, ProFleet 5W-30 API CF, MAN 3277, MB 228.5, Performance Levels/
MB 228.5/228.51, MTU ACEA E4-99 Issue 3, MAN Volvo VDS-3, MTU Typ 3, Scania Approvals >
type 3, Renault RVI RXD, Volvo 3277, MB 228.5, LDF-2, Renault RXD/RLD-2, ProFleet GEO 15W-40
VDS-3, Scania Low Ash MTU 2+3, DAF, Renault RXD Deutz DQC III-05 MAN 3271-1, MB 226.9
018
HD
> Can also be used in some cases as hydraulic oil, where specified by the manufacturer.
019
Valvoline HD
15W-40, 20W-50,
10W, 30, 50
The technology behind Premium Blue engine oils was developed in partnership with Cummins Inc.,
the world’s largest producer of commercial diesel engines above 50 horsepower. By combining the
innovation and proven performance of premium Valvoline lubricants with Cummins’ unparalled expertise
in diesel engines, we have taken engine design and lubricant technology to new performance levels. This
partnership continues to create high-performance products such as Premium Blue engine oils, which are
designed for extended engine life and increased protection in all heavy duty diesel applications.
Material Number Table 5L 20L 208L 1000L BULK Material Number Table 5L 20L 208L BULK
Premium Blue Extreme 5W-40 703679 VE17778 Premium Blue GEO-LA 40 VE17758 VE17759
Premium Blue 15W-40 VE17711 VE17706 VE17718 VE17715 VE17719 Premium Blue GEO-MA 40 VE17798 VE17799
corrosion performance, helps keep the prevents scuffing and ring sticking
>> Pre-diluted for easier engine clean and prevents > Pre-diluted for easier mixing and
mixing and may be used scuffing and ring sticking may be used for both injector and pre
for both injector and pre-mix >> Use fuel/oil ratios as mix applications
applications specified by the engine > Use fuel/oil ratios as specified
>> Use fuel/oil ratios as manufacturer up to a by the engine manufacturer up to
specified by the engine maximum of 100:1 maximum of 100:1
manufacturer up to
maximum of 100:1
Performance Levels/
Performance Levels/ Approvals >
Approvals > SynPower Scooter 4T 5W-40
SynPower 4T 10W-40 API SJ, JASO MA, JASO Wet
API SG, JASO MA Clutch test T 904
SynPower gear oils are high-performance fully synthetic lubricants specially formulated to meet the
needs of modern as well as conventional gear boxes and transmissions of trucks, buses and other
HD applications. Formulated with the most advanced additive technology SynPower gear oils provide
outstanding thermal stability over a wide temperature range, improve easier shifting at low temperatures
and offer superior protection against wear and corrosion.
026
Performance Levels/
Approvals >
SynPower TDL 75W-90
API GL-3/4/5, API MT-1, ZF TE- Performance Levels/
ML-02/05/07/8/12/16/17, Approvals >
MIL-PRF-2105 E, MAN 3343 SynPower GL-5 75W-140
SL, MAN 3343 Typ S, MAN 341 API GL-5, Scania STO:1,
Typ E3, Scania STO:1 MIL-PRF-2105E
Performance Levels/
Approvals >
DuraBlend GL-4 75W-90
API GL-4, MIL-L-2105
Performance Levels/ Performance Levels/ DuraBlend GL-4 75W-80
Approvals > Approvals > Renault, Peugeot, Citroën, MAN
DuraBlend GL-5 LS 75W-90 DuraBlend GL-5 75W-90 341 TL, 341 Typ Z-3, Volvo
API GL-5 LS, MIL-L-2105D API GL-5, MIL-L-2105D 97305, Eaton*, ZF TE-ML 02D
HP Gear Oils
>> Formulated with a special additive system to provide optimal performance and protection
>> Offers smooth shifting under various temperature conditions
>> Protection against wear and corrosion
SynPower® ATF
>> A high-performance fully synthetic automatic transmission fluid Performance Levels/
exceeding many leading OEM specifications Approvals > SynPower ATF
>> Specially formulated for long-drain interval requirements and ideal GM Dexron IIE, Ford Mercon,
for all automatic and powershift transmissions; it is also suitable MB 236.8, MAN 339 Z-2,
339 V-2 Allison
for industrial and hydraulic systems
C-4, Caterpillar TO-2,
>> Provides excellent low-friction properties, outstanding high and low Voith H55.633633
temperature fluidity, and high thermal stability (former Voith G 1363 ZF TE-ML
09X, 11A,14B,16L)
MaxLife® ATF
030 Higher kilometer transmissions have different needs. As automatic transmissions age, seals can harden
and crack causing leaks. Furthermore, deposit and varnish build-up can cause wear, slippage and rough
shifting. MaxLife ATF is the only ATF formulated for vehicles with over 100,000 kilometers.
The advanced formulation helps keep the transmission functioning properly and enhances the
performance and life of high-kilometer transmissions.
Performance Levels/
Approvals > ATF Type D
GM Dexron IID, Ford
Mercon, MB 236.6,
BMW Group 24, ZF TE-
Performance Levels/ ML03D/04D/11A/14A/17C,
Approvals > ATF Dex/Merc Voith H55.633533 (former
GM Dexron III G-34221, Ford G 607), Allison C-4, MAN
Mercon M-020602, Allison 339 Z-1, V-1 (former type D),
C-4, Nissan, Caterpillar TO-2 Caterpillar TO-2
The Valvoline range of greases includes products specially designed for use in automotive, heavy duty,
marine and industrial equipment. Developed using the highest quality base stocks and the latest additive
technology, Valvoline greases provide superior lubrication properties. Unique mixed-complex soap
structures are used in Sienna grease and Dipper stick grease, to provide the ultimate protection against
wear and corrosion, even under the most severe conditions.
032
Performance Levels/Approvals > Moly Fortified MP Grease Performance Levels/Approvals > Dipperstick Grease
NLGI Grade - 2 NLGI Grade - 2
Performance Levels/Approvals > Sienna Grease Performance Levels/Approvals > Semi-Fluid Grease
NLGI Grade - 2/3 NLGI Grade - 00
>> Special grease for the lubrication of stern tubes >> Universal lithium EP Grease developed for lubrication of
>> Possible to use for other purposes, such as lubrication of bearings automotive and industrial equipment
and a variety of deck machinery >> Can be applied over a wide temperature range
>> Good anti-corrosion and anti-oxidation properties; excellent >> Good water resistance and protects against rust and corrosion
resistance to both fresh and salt water >> Mechanically very stable and easily pumpable, due to its
smooth structure
Performance Levels/Approvals > Stern Tube Grease Performance Levels/Approvals > Lithium No. 2 EP Grease
NLGI Grade - 3 NLGI Grade - 2
034
AGRICULTURAL OILS
Reliable, versatile and unique products for farmers
Universal fluid for engine transmission and hydraulics
Hydraulic Fluids
Ultramax™
The stringent requirements of industrial environments demand special lubricants. Ultramax products are
specially formulated to provide modern hydraulic systems with superior anti-wear protection and heavy
duty service performance.
035
Material Number Table 20L 208L BULK Material Number Table 60L 208L
Ultramax HLP 32 VE16426 VE16438 VE16439 Ultraplant ES 46 S VE16618
Ultramax HLP 46 VE16446 VE16458 VE16459 Valvoline E.P.G. 150 VE16737
Ultramax HLP 68 VE16466 VE16478 Valvoline E.P.G. 220 VE16757 VE16758
Ultramax HLP 150 VE16518 Valvoline E.P.G. 320 VE16778
Ultramax HVLP 32 VE16206 VE16218
Ultramax HVLP 46 VE16226 VE16238 VE16239
Ultramax HVLP 68 VE16246 VE16258
Lawnmower Oil
lubricants I other lubricants
Lawnmower Oil is a premium lubricant specially developed for use in all 4-stroke lawnmowers, rotary
cultivators, small tractors, floor cleaning machines and other similar equipment operating in a high
revving environment.
>> SAE 30
>> Keeps engines clean
>> Protects against wear and corrosion
>> Fulfills requirements of leading lawnmower manufacturers
DuraBlend® Chainsaw 2T
DuraBlend Chainsaw 2T is a synthetic blend lubricant specially formulated
with unique basestocks and additives to provide enhanced oil film strength for severe
operating conditions encountered by high-speed light and heavy chainsaw equipment.
>> SAE 40
>> For chain lubrication only
>> Do not use for engines
Cooling system protection at extreme low temperatures requires exceptional products, Valvoline Coolant
AF’s have been specifically designed to provide very high levels of protection even at temperatures as low
as -36°C. Suitable for cars, trucks, buses, and meeting the requirements of most leading car and truck
manufacturers, Valvoline Coolant AF contains no nitrites, amines or phosphates. Coolant AFs can be used for
both open and closed cooling systems, and are safe to mix with other coolants based on ethylene glycol.
MaxLife® Coolant AF
Coolant AF Extreme
>> For vehicles with more than >> Prevents scaling and
100,000 kilometers system deposits
>> Prevents scaling and >> Protects seals, gaskets and
system deposits aluminum
>> Protects seals, gaskets and >> Lubricates water pump seals
aluminum >> Long life formula (5 years)
>> Lubricates seals and hoses >> Cannot be mixed with other
to prolong life coolants
040 >> Long life formula (5 years)
Performance Levels/
Approvals >
MaxLife Coolant AF
BS 6580: 1992, ASTM
D-4985, Scania*, ASTM
D-3306 (D-4656), NATO
S-759, O-Norm V5123, SAE
J 1034, MB 325.3, Ford WSS
M97 B44-D, Detroit Diesel, Performance Levels/
Jaguar*, DAF, VW/Audi/SEAT/ Approvals >
Skoda TL-774D, G12, Deutz Coolant AF Extreme
MWM, Opel 6277M, Isuzu*, ASTM D3306, D4985,
Leyland*, MAN 324, Steyr*, SAE J1034, J814C, J1941,
MAN*, B&W*, MACK, GM B0400240, Meets
Renault RV BS 6580, G11 and G12+
Performance Levels/
Approvals >
Coolant AF Extra
BS 6580: 1992, AFNOR 15-601,
Performance Levels/
1991, ASTM D-3306 (D-4656),
CUNA NC956-16, O-Norm Approvals >
V5123, SAE J 1034, MB: 325.0 Coolant AF BS 6580
& 325.2, BMW N600.69.0, MAN BS 6580: 1992, AFNOR
324 Type NF, VW TL774C, 15-601, 1991, ASTM D-3306
Audi TL774C, SEAT TL774C, (D-4656), CUNA NC956-16,
Skoda TL774C O-Norm V5123
Cooling system protection at extreme low temperatures require an exceptional product, Valvoline Coolant
AF’s have been specifically designed to provide very high levels of protection even at temperatures as low
as -36°C. Suitable for cars, trucks, buses, and meeting the requirements of most leading car and truck
manufacturers, it contains no nitrites, amines or phosphates. Coolant AFs can be used for both for open
and closed cooling systems, and are safe to mix with coolants based on ethylene glycol.
HD Extended Life
HD Extended Life is an engine coolant for trucks, buses, road construction machinery
and industrial equipment, and fulfils the requirements of the most leading heavy duty
engine manufacturers. HD Extended Life is free of nitrites, amines and phosphates, which
makes it more friendly to the environment. HD Extended Life Concentrate protects cooling Causes of Engine Failure
systems against frost, corrosion and overheating for at least 3 years, 7000 hours or
Others
500.000 kilometers. Suitable for open and closed cooling systems and aluminum engine
blocks. The product is mixable with other ethylene-glycol-based coolants, howeverBrakesthis
may shorten the long-life characteristics. HD Extended Life can be mixed with water
Transmission
in
several concentrations, depending on the desired freeze protection.
Fuel
Electrical circuit
042
Engine
As 22% of all engine failures are related to the cooling system, proper cooling system0 5 10 15 20 25
Others
°C 0
Brakes
Fuel
-40
Electrical circuit
Engine
-60
Cooling system Max. freezing protection
at -68°C
0 5 10 15 20 25
-80
% 0 20 40 60 80 100
°C 0
-40
-60
Max. freezing protection
at -68°C
-80
0 20 40 60 80 100
Pure water
HD COOLANTS
043
Performance Levels/Approvals
ASTM D-6210, D-3306, SAE J 814, J 1034, GM 1899M, 1825M, Cummins 14603, 3666286, Caterpillar EC-1, Detroit Diesel
HD EXTENDED LIFE READY TO USE
7SE298, Thermo King*, Link Belt*, TEREX*, TMC of ATA RP-329B, RP-338, Federal Spec. A-A-870A
ASTM D-6210, D-3306, SAE J 814, J 1034, GM 1899M, 1825M, Cummins 14603, 3666286, Caterpillar EC-1, Detroit Diesel
HD EXTENDED LIFE -67 READY TO USE
7SE298, Thermo King, Link Belt, TEREX, TMC of ATA RP-329B, RP-338, Federal Spec. A-A-870A
ASTM D-6210, D-3306, SAE J 814, J 1034, GM 1899M, 1825M, Cummins 14603, 3666286, Caterpillar EC-1, Detroit Diesel
HD EXTENDED LIFE CONCENTRATE
7SE298, Thermo King, Link Belt, TEREX, TMC of ATA RP-329B, RP-338, Federal Spec. A-A-870A
automotive Chemicals
that brake and clutch fluids are refreshed every two years.
Material Number Table 0.25L 0.5L 1L 5L Material Number Table 0.25L 0.5L 1L 5L
Brake and Clutch Fluid DOT 3&4 VE58000 VE58002 VE58004 VE58006 Brake and Clutch Fluid DOT 5.1 VE58020 VE58022 VE58024 VE58026
Power Steering Fluids
automotive chemicals I power steering fluids
Performance/Level Approvals
SynPower Power Steering Fluid -
Please check owners
manual before use.
Audi
Daimler Chrysler 345.0
MAN M 3289
Opel B 040 0070
Performance/Level Approvals Porsche
LHM Plus Fluid - Please check Saab*
owners manual before use. SEAT
AFNOR NF R 12-640 Skoda
ISO 7308 Volvo 1161529
PSA (Citroën) B71 2710 VW TL 52146
Treat your engine with Valvoline Fuel Injector and Carburettor Cleaner, to obtain maximum performance and
efficiency. By helping to reduce build-up of contaminants in fuel injectors and carburettor systems, Valvoline Fuel
Injector and Carburettor Cleaner cleans and lubricates to restore engine power and reduce fuel consumption
while preventing start-up problems or engine hesitation. This product does not contain strong harmful solvents
that could damage the fuel system.
>> Cleans injectors in a single treatment
>> Restores engine performance
>> Keeps fuel injectors in a single treatment
>> One treatment lasts up to 3.000 kilometers
>> Provides carburettor cleaning
>> Helps stop corrosion
>> Safe for oxygen sensors and catalytic converters
Oil Treatment
Valvoline Oil Treatment contains a polymer that increases the viscosity index of engine oil, making the oil
more viscous (thicker) at high temperatures without increasing viscosity proportionally at low temperatures.
Engine oil fortified with Oil Treatment still becomes less viscous (thinner) as temperature increases and
more viscous (thicker) as temperature decreases, but at a slower rate than non-treated oil. Oil Treatment
increases oil viscosity at high temperatures which helps reduce blow-by and oil burning by helping piston
rings form a better seal. Oil Treatment also contains an extreme pressure additive which helps reduce
engine wear.
050
When To Use?
Deposits are the result of combustion and need to be removed regularly. One bottle of SynPower Fuel
System Cleaner treats up to 75 liters of gasoline or diesel and should be used at least at every service to
assure that the engine keeps performing at its best. Safe for catalytic converters and particulate filters.
When To Use?
One bottle treats up to 75 liters of gasoline or diesel. Users will experience a real difference after a single
application and continued use will help return the engine to optimum performance. It is recommended to
use the products every 5,000 kilometers or at least at every oil change, as higher kilometer vehicles can
produce more fuel system deposits.
052
Lubricity Agents
Lubricity agents reduce rust formation in fuel storage and delivery systems seen in older vehicles.
>> Reduction of wear on injectors and fuel pump, longer life of injectors and fuel pump
Cetane Improvers
Cetane Improver decreases ignition delay and improves combustion.
>> Better fuel economy
5 minute clean-up
VPS Engine Flush is one of the latest generations of automotive products for today’s demanding automotive
engines. VPS Engine Flush is a premium engine cleaner that will not harm the engine, ring seating, valve
guides or seals, nor does it contain additional additives that can adversely affect engine oils.
054
HD Chemicals I VPS HD
Inexpensive and cost effective way to improve performance,
downtime and profit
High Pressure
Silicone Spray Penetrating Oil White Grease Lubricant + PFTE
Silicone Spray is a light duty Penetrating Oil, loosens and White Grease penetrates tiny High Pressure Lubricant protects
lubricant that lubricates, lubricates corroded parts crevices, forming a lubricating metal parts against wear and
waterproofs and protects, and threads. grease that stays exactly where corrosion in extreme conditions.
leaving no sticky residue. it’s sprayed.
>> Frees bolts, nuts and other >> The freshly sprayed product
>> Suitable for door hinges, fasteners >> Suitable for all metal-to-metal reaches every square
rubber mountings, drawers, >> Special lubricants eliminate applications millimeter
windows and sliding doors squeaks >> Non-hardening, non-dripping >> Contains PTFE for smooth
>> Non-staining >> Provides long lasting and non-staining formula lubrication
>> Stops squeaks and sticking protection >> Water and heat resistant >> Performs over a wide
058 >> Fights rust and corrosion temperature range between
-50°C to +250°C
>> Penetrates, loosens, lubricates, and protects metal parts from rust and corrosion
>> Dries wet ignitions
>> Preserves battery terminals from corrosion
Cockpit Spray restores that Glass Cleaner is a stay on foam ProShine Wax offers cleaning
new car look without leaving that - effectively cleans and and high gloss shine in one
a sticky coating. brightens all glass surfaces easy application.
without streaking.
>> Anti-static film repels dust >> High quality waxes deliver a
>> Restores fading and cracking >> Balanced formula resists high gloss shine
of vinyls fogging >> Durable formula for lasting
>> Shields against ultraviolet >> Powerful cleaners remove protection
damage mud, insects and bird >> Easy to apply and remove
>> Ideal for cars, trucks droppings >> Ideal for cars, trucks and
and boats >> Solvents effectively remove motorcycles
stubborn oil and road grime
>> Prevents streaking at low
temperature
>> Starts gasoline and diesel >> Removes nuts and bolts easily >> Creates a quick drying,
engines quickly >> Performs over an extremely self-sealing coating
>> Reduces power loss of wide temperature range >> Acts as an excellent primer
batteries (-30°C to +1200°C) for most paint systems
>> Also works on lawnmowers, >> Helps slow down corrosion
trimmers, chain saws, of iron and steel
motorcycles, etc.
Whenever you need to protect against the corrosive effects of moisture, there is a product in our Tectyl range which can do the
job perfectly. For 75 years, Tectyl products have been one of the most successful rust preventatives in the industry. Today, the
formulation has been enhanced to meet the needs of Do-It-Yourself and other non-industrial users.
062
Tectyl Tectyl Tectyl Tectyl
Bodysafe ML Glashelder/Klar Motor Konservering
A black, bitumen compound for Ideal for the protection of A resin-based, colorless, Designed to protect the inside
the protection against corrosion. automotive hollow sections corrosion preventive compound. of engines from corroding
Perfect for the underbody of the like door panels, side sills and Tectyl Glashelder/Klar can be during storage. Tectyl Motor
car as well as tanks, gas lines, frames. This petroleum wax- applied on tools: gardening, Konservering can be used with
emergency brake cables and based product is designed to household, automotive, marine spark-ignition and compression-
hydraulic brake lines. Cures to penetrate deeply into crevices and industrial. It is also an ignition engines. Simply spray
a relatively firm, black, resilient, to prevent corrosion. Do not excellent moisture repellent for a minute or two into the
tough film. forget to pay special attention when used on electrical wiring intake of the carburettor, while
to places where water can in motor vehicles. the engine is running.
collect, such as corners and
seams. Tectyl ML is also
available with an attachment
containing a special nozzle set
for difficult-to-apply areas.
064
nothing can
stop me now*
065
NOTES
066
NOTE:
Inside Back Cover
(Blank)
068
Valvoline EMEA
www.valvolineeurope.com
t +31 10 497 5000 I f +31 10 497 5975
P.O. Box 421 I 2991 XT Barendrecht I The Netherlands
*Trademark owned by a third party ® Registered trademark, Ashland or its subsidiaries TM Trademark, Ashland or its subsidiaries © 2009, Ashland
The information presented in this brochure is believed to be accurate and reliable. However, because the conditions and methods of use of the products are beyond Ashland’s control, Ashland cannot assume any responsibility
for performance or results obtained through the use of the products herein described. It shall be the responsibility of the user to determine the suitability of any of the products mentioned for the user’s specific use. Ashland’s sole
warranty is that the products shall at the time of delivery conform to the technical specifications in effect at the time of shipment. Any warranties that may be applicable pursuant to any laws or regulations, including any warranties
of fitness for a particular purpose or merchantability, are expressly excluded. Unless expressly agreed otherwise, Ashland’s liability with regard to non-conforming products will be limited to the replacement value. Statements
or suggestions concerning the possible use of the products described herein are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent.
Although every care is taken to ensure accuracy and completeness in compiling these data, no liability can be accepted for damage or loss caused by any errors or omissions in the information given.