Lubricants and Fluids for Industrial Applications

Thermic Fluid
Rust Preventives
Metal Working Fluids Thermic fluid for h eat transfer system used in
Petronas cSt at Indoor Outdoor Danol XHT 24, 32
Type Recommendation textile, pharmaceutical, chemical and process
Grade 40°C storage storage industries
2 1 Water wet components after cutting or
Logamol ECT-L
Water Soluble Cutting Oils
2
months month aqueous wash. Rock Drill Oil
Water wet components after cutting or
Mineral oil 2 1
aqueous wash. Nuts, Bolts, Bearings, Bars, Lubricant for pneumatically operated rock drills in
Hidraulic HL 100
Dewatering Logamol ECT 10 2 Tubes, Machine tools. EC 10S is a mild underground and surface mining operations
General purpose cutting fluid suitable for light to medium duty operations such as grinding, months months
Logamol E 160 odour product which also has high flash point
turning, milling, drilling, forming, etc. on ferrous and non -ferrous materials. (90°).
Semi-synthetic Gear &Transmission Oils
3 2 Sheet coil, Strip bar, Extruded steel, Exposed
Logamol ECT 20 2
Mecafluid/S 42
Semi-synthetic cutting fluid suitable for light to moderate duty machining operations on
months months gearings, Conveyors, Wire ropes.
Transmission Oil
ferrous and non-ferrous materials. 5 4
Greasy Logamol RG 20 3 Valuable machine & tools
months months Urania CF 10W API CF/SF, MB228.0, Mono grademineralbasedengineoilforheavyduty
Mecafluid/S 77
Heavy duty semi -synthetic cutting fluid suitable for wide variety of operations from form (SAE 10W) Allison C-3 dieselengines.
grinding, turning to deep hole drilling and broaching on ferrous and non -ferrous materials.
Specific multi grade lubricant for manual gearboxes
Premium Version of Mecafluid/S 77 & is recommended for similar application Cleaners TutelaTransmission API GL-4 and di fferential with hypoid gears of all the types of
Mecafluid/S 80 of ferrous & non-ferrous Materials EPYX Series (SAE 90,140, 80W90) motor vehicle s where lubrican ts with Extreme
Application Petronas Grade Product Description Pressure (EP) characteristics aredemanded.
Synthetic
Mecaclean EXP Axlefluidforanyvehicleapplications.Itissuitablefor
Synthetic fluid for heavy duty machining of ferrous and non -ferrous materials or where very High pressure industrial cleaners , working at pressures up to 300 TutelaTransmission API GL-5 differentials with hypoid gears and steering boxes
Mecafluid/S 2006 Water based
bar on all ferrouscomponents, aluminum and aluminum alloys. W90/M-DA (SAE 80w-90) where lubrication with Extreme Pressure (E P )
high degree of surface finish is required. Mecaclean AL
characteristicsis required
.

Neat Cutting Oils Fluid for mechanical transmissions of cars, commercial

Machinery Lubrication TutelaTransmission API GL-5 vehicles,industrialvehicles,constructionandsuitablefor
W140/M-DA (SAE 85w-140) use in gears and di fferentials with hypoid gears and
Application Petronas Grade cSt at 40°C Compatibility Recommendation steeringboxes,whereverlubricationwithEPisrequired.
Logamol EMG 40 40 Ferrous Suitable for gear hobbing, shaving,
shaping, threading, drilling, boring,
Hydraulic Oils Axles fluid with/without hypoid gear with specific
Gear hobbing TutelaTransmission API GL-5
Ferrous & reaming and tapping. EMG 40 is a featuresofEP.Speciallyformulatedfornormal&self-
Logamol EVG 30 30 W 90/LS (SAE 80W-90)
Non-ferrous heavy duty product for tough operations. Hidraulik HL 32, 46, 68, 100, 150, 220, 320 lockingdifferentialswithlimitedslipsystems.
Deep/hole Suitable for deep hole drilling, Hydraulic / Machinery oil - Non HLP & HLP Transmission oil for hydrodynamic, hydrostatic gear
Ferrous & General Motors
drilling Logamol EVG 17 17 broaching,boring, reaming, tapping, Hidraulik EP 32, 46, 68 Tutela GI/M boxes of industrial vehicles , tractors, combines and
Non ferrous T.A.S.A.
Broaching milling, turning of ferrous material. agricultural machinery.
Ferrous & Suitable for grinding and also for Hidrobak 32, 46, 68 Use in all automatic transmissions, power steering
Grinding Mecafluid 149MB 10 high precision operations. Hydraulic oil - Premium quality HLP grade
Non-ferrous andotherhydraulicsystemsforwhichaDexronIIIor
General Motors
Hidrobak UF 32, 46, 68 PetronasATF D III AllisonC-4typefluidsarespecified.Itisalsosuitable for use
Suitable for light duty operations like honing, DEXRON IIIG Allison C-4
in hydrostati c drive s and industrial ,
Ferrous & lapping and super finishing. N 05H can also agricultural,miningandmarinehydraulicssystems.
Honing Logamol N 05 5 Hydraulic oil - High viscosity index (HVI) Hidrobak HV 46, 68
Non-ferrous be used for medium duty operations like
drilling, threading and tapping.
Hydraulic oil - HVI and Zinc/Ash free Hidrobak HVI FZ 46, 68 Universal Tractor Transmission Oil (UTTO)
High performance fluids for use in transmissions,
Slide way oil Husoli HG 68, , 220 Akros Multi UTTO
API GL-4
hydraulic systems, oil immersed brakes of tractors
CNH MAT 3509
(SAE-10W-30,20W-30) andoff-roadequipment,quarryingandused final drives
John Deere
Drawing & Forming Oils Wet Brakes
JDM J20C
and hydraulic systems and to optimize the

Application Petronas Grade cSt at 40°C Recommendation

Gear Oil performanceofagriculturalandcommercialtractors
API GL-5
AkrosAxle Gear UTTO TransmissionoilwithEPforgearboxes,finaldrives,
Fin forming Gear MEP 68, 100, 150, 220, 320, 460, 680, 1000 Graziano
(Evaporative and
Suitable for light duty forming application on Gear oil - EP type (SAE-80W-90) normal and self -locking di fferentials also fitted with
Mecafluid D 3210 2 aluminium, copper and steel. Widely used for GTG LLP-007
Non evaporative
aluminium fin formation used in AC and radiators
Wet Brakes & LS limitedslipsystemsoftractorsandfarmmachines.
type) ZF TE-ML05C,07A
Synthetic gear oil - PAO based Gear SYN IG 150, 220, 320, 460
Cold forging Logamol LF 1C 80
Suitable for cold heading, progressive heading and
cold nut forming. Not suitable for yellow metals like Diesel Engine Oils
copper, brass and bronze. Synthetic gear oil - PAG based Gear PG 150, 220, 320, 460
API CI-4 / CF Extra high performance synthetic blend diesel engine
Stamping Mecafluid/D 128FT 100
Suitable for fine deep pre ssing of stee l of thickness Urania Optimo
up to 12 mm. MB 228.5, MAN 3277, oil exceeding MB 228.5 performance levels with
SAE 10W-40
MACK EO-N outstanding soot control.
Compressor Oil API CJ4 / CI 4 PLUS Ultimate performance multi grade diesel engine oil for
Cummins CES 20078, modern low -emission engines with outstanding soot
Screw air compressor oil Pressol 46, 68, 100, 150, 220 Urania Supremo
Volvo VDS-3, MB 228.3, control,exceedingAPI serviceCI-4andACEA E7
CJ-4 SAE 15W-40
MAN 3275, performance levels, low emission engines with exhaust
Quenching Oil Synthetic screw air compressor oil Pressol SYN 46, 68 MACK EO-M Plus gas recirculation(EGR).
Ultimate performancewith outstanding soot control,
Application Petronas Grade cSt at 40°C Recommendation Refrigeration compressor oil Pressol LTM 46, 68 Urania Supremo Cummins CES 20078, multi gradediesel engineoilexceeding API service CI -
CI-4 + SAE 15W-40 / Volvo VDS-3, MB 228.3, 4andACEAE7 performance levels,lowemission engines
Suitable for quenching of smaller components
CI-4 SAE 15W-40 MAN 3275, with exhaust gas recirculation (EGR) as
Medium fast Logamol Quench MF 22 such as nuts, bolts, set crews, crank shafts, ball MACK EO-M Plus wellasolderhighspeedturbo chargedengine.
bearings, hand tools and springs. Turbine Oil
API CH4 / SJ Cummins
Ultimate performance multi grade d iesel engine oil
Suitable for high speed steel tools, ball bearings Urania CH-4 CES 20076, Volvo VDS-2,
Logamol Quench AC exceedingAPI serviceCH-4 performancelevelswith
Accelerated 22
and other components. Lubrication of steam, gas andhydraulic urbines Jenteram HC 32, 46, 68 SAE 15W-40 MB 228.1, MAN 271,
extendedoildrainintervalsonlowemissionengines.
MACK EO-M Plus
 PETRONAS, short for PETROLIAM
Greases NASIONAL BERHAD, is a fully
integrated Oil & Gas Multinational with
Special multi -purpose lithium grease for heavy operations spanning the Oil and Gas
Lithium soft & Tutela commercialvehiclewheelhubbearing and lubrication of WHY LUBRICANTS? energy chain from exploration &
stringy texture MR3 heavycommercialvehicleswhich does not require production to refining and oil & gas
specificgrease. PETRONAS Lubricantsuses it'sown API GroupIII+baseoil, marketing.
Lithium Tutela Jota Highviscosityindexpremiumqualitybaseforheavy or ETRO,whose exceptional features are: PETRONAS is amongst top 10
multi-purpose MP2, MP3 shock loading multi-purpose grease. petroleum companies in the world and
is highly ranked amongst fortune
Extreme heavy duty, friction reduction additives, EP global 500's largest corporations.
Lithium Calcium Engen Resista withfilmthickeningpolymers toimprove PETRONAS was founded on 17th August
(Moly, MoS2 - 5%) EP High Load boundarylubrication,InhibitorforR&Oand
waterresistant.
corrosion,
- THE PETRONAS ADVANTAGE 1974 as the national oil company of
Malaysia. It is one of the most
Generalmulti-purposeEP grease for SUPERIOR QUALITY GROUP III BASE OIL successful nationally owned oil
Lithium Tutela Jota
industrialapplications, adhesiveness&resistanceto
extreme pressure Ep00, EP0, EP2 companies in the world.
waterwashout.
Global lubricant business of
MultipurposegreasewithMOS2asEP additiveto avoid PETRONAS is managed by PETRONAS
Lithium Tutela Jota Ind shock load & noise, anti-scuffing, water resistance,
(Moly grease, EP) MO2 longer life.
Lubricants International or PLI.

ETRO
PETRONAS has a wide range of
Li-complex grease with EPfor load carrying ability, lubricants specially created while
Li-Complex Tutela rust- corrosion resistance, shear stability, lease oil
multipurpose EPgrease Jota Com 2 maintaining the highest standards of
separating,componentlife.
Machine the industry catering to market needs.

Bentonite : PAO Synthetic Engen Gengrease

Synthetic-bentonitethickener-hightemp+180°C-low
torque,longlife,lowbearingwear&corrosion,high load
Demand
grease, HT/EP(Non-melt) SPL2 HT carrying ability, protection and good water
resistance,forhotelectricmotor,fan&bearingsmill
Low viscosity Excellent oxidation
formulation and thermal
capability stability
Coolant
Fuel Low
AreadytouseEthyleneGlycolbasedprotectivefluid for economy maintenance
Profar JIS K 2234, radiators, cooling systems of motor vehicle, light
(Ready to use) ASTM D3306 and heavy commercial vehicles, tractors and
earth-movingmachinery.
It is a concentrated Ethylene Glycol protective fluid Low High viscosity
ProfarOT JIS K 2234,ASTM forradiators,coolingsystemsofcar,lightandheavy volatility index
(Concentrate) D3306 / 4985/6210 commercialvehicles,tractors&earth-moving
machinery. High
Long equipment
oil life life

NOACKVOLATILITY%
16
ETRO has
14

12 lower NOACK
10

8 volatilityto
6 PETRONAS LUBRICANTS (INDIA) PVT. LTD.
meetlowoil
4
Unit No. 603, C- Wing, Corporate Avenue, Opp. Solitaire Corporate Park
2
consumption
0
Chakala, Andheri(East), Mumbai 400 093.
GroupII
Etro
requirements Tel:+91022 67717500,Fax:+91022 67257457
(GroupIII) PAO

North Regional Office : South Regional Office : East Regional Office :

VISCOSITYINDEX
OfficeNo-217,DLF-Tower-A, O-713, 7thFloor,SpencerPlazaNo.768 /769, Unit404,4thFloor,VasundharaBldg.,
Higherviscosity index Jasola,NewDelhi-110025 Annasalai,Chennai-600 002 2/7, SaratBoseRoad, Kolkata-700 020.
Tel:+911143593271-76 Tel:+914442697649-54 Tel:+913364591677-85
of ETRO indicatesvery
Fax:+911143593254 Fax:+914442697652 Fax:+913340033626
130 little changein viscosity

125 with extreme temperature, Lubricants and Fluids for

120 maintaininghigh equipment
Etro6
reliablity www. pli-petronas.com | Email: industrialsupport@pli.petronasindia.com Industrial Applications