Full Size Selection Chart

Product Catalogue
Rail
www.tengroup.com.au
Rail
© The Energy Network 100815
the energy network
Our diversity is your solution.

Diversity.
Sales Service
TEN is your complete source for tools TEN offers an extensive after sales
and construction equipment for the service and repair capability for
energy industry. We only choose to a wide range of low and high
work with quality brands that deliver pressure hydraulic equipment
industry designed, tested and proven including battery tools, line tools,
products that are fit for purpose hand hydraulics, jacking equipment,
and offer the best lifetime value for pumps and lifting cylinders. We also
our customers. Our product range repair and refurbish all brands of
covers cable hauling and stringing pulling and lifting hoists including
equipment, hydraulic tooling, PPE web strap, chain and wire rope.
and liveline equipment, earthing Our fully equipped workshops and
solutions, hand tools, test equipment, specialist tool technicians provide:
and locally manufactured canvas • a high level of customer service
and PVC storage solutions. We offer with prompt tool turnaround
our customers: • advice on extending the life of
• Quality tools and equipment from equipment through preventative
innovative and market leading maintenance programs
manufacturers • a range of testing and calibration
• Knowledge and industry services including torque,
experience to assist with pressure and load testing
equipment selection • manufacturer certified service,
• A diverse and extensive range of repair and refurbishment of
products from a single supplier stringing and cable hauling
equipment
Solutions.
Hire and sleeve bags, EWP bucket aprons
and specialised storage solutions.
TEN Hire offers its customers access TEN also assembles a range of low
to the largest specialised cable and high voltage jumpers, bonders
hauling and stringing equipment and inline switches designed for the
fleet in Australia. The range Australian market.
includes hydraulic cable pullers • All TEN storage solutions
(skid and trailer mounted), brake and assembled products are
units (tensioners), puller-tensioners, Australian Made in our premises
capstan winches, 3 drum winders • We manufacture and assemble to
and 3 drum braking units, self strict quality guidelines under our
loading cable trailers, drum stands, ISO9001 quality management
pole pullers and a large range system
of associated equipment such as • TEN can custom manufacture
presses and pumps, stringing rollers and assemble products to meet
and swivels. TEN also offers leading
operator training and competency Manufacture our clients’ needs.
verification to an AQTF standard.
& Assembly TEN Group : Australia
The Energy Network (Australia) Pty Ltd
Why partner with TEN hire? Our manufacturing division produces ABN 72 093 052 441
• Conserve working capital and high quality canvas and PVC storage
stretch project budgets solutions to carry, store and protect HEAD OFFICE - QUEENSLAND
• Be flexible in scaling up or down your valuable equipment. All 65 Wentworth Place
as your workload demands products are designed for the toughest BANYO QLD 4014
• Use the latest technologies and conditions and manufactured to our P|F +61 7 3212 8999 | 8998
innovative stringing methods stringent quality requirements. Our
W www.tengroup.com.au
to drive productivity and range encompasses fibreglass stick
profitability bags, tool buckets, PPE bags, glove E sales@tengroup.com.au
the energy network
Rail
TRACK MAINTENANCE
Hydraulic Tooling 6
Handtools 8
Ratchet Podgers 8
Equipment Bags 10
Cable Preparation Tools 11
CONSTRUCTION & MAINTENANCE
Hoists 14
Come-Alongs/ Grips 15
Hydraulic Tools 16
Ratchet Cutters 21
Tension Meter 22
Dynamometers 24
Overhead Rollers 25
Lewis Cable Socks 26
Rope 27
Hydraulic Pullers 28
Capstan Winch & Electric Cable Puller 30
Drum Winches & Brakes 31
Height Safety Equipment 32
Slings 34
Ladders 34
Rescue Kits & Live Working Equipment 35
Earthing 36
Test Equipment 36
Detectors 37
Tool Buckets 39
Glove And Sleeve Bags 39
Fibreglass Stick Bags 40
Equipment Bags 41
SIGNALLING
Hydraulic Pullers 44
Capstan Winch & Electric Cable Puller 46
Drum Winches & Brakes 47
Reels 48
Rope 49
Lewis Cable Socks 50
Cable Lubricant 51
Drum Jacks 52
Tool Buckets 53
Equipment Bags 55
Hydraulic Tools 58
POWER SYSTEMS & OVERHEAD TRACTION
Fibreglass Sticks & Accessories 65
Hydraulic Tools 68
Inspection Equipment 69
Hydraulic Tools 69
Equipment Testers 71
Voltage Detector 71
Detectors 72
Tension Meter 74
Bonding Clamps 76
Conductor Connector 79
Hydraulic Tools 80
Tool Buckets 82
Equipment Bags 84
Insulated Handtools 86

TRACK MAINTENANCE the energy network
Service & Repair

Energy utilities and contractors make large
investments in tools and equipment that
can cost millions of dollars each year.
Good servicing routine and processes

extend the life of tools, minimising
unplanned downtime and reducing tool
lifetime costs. Planned maintenance for the energy network
regular servicing of your tooling also helps
reduce repair costs, and improves reliability
and productivity.
SERVICING
Servicing tools and equipment extends the
useable life of the tool by replacing worn
components before a failure or fault occurs.
Replacing a low cost seal on a hydraulic Hydraulic Battery Tools
tool could be the difference between getting Line Hydraulics
a job done and costly delays. Repairing a
Stringing Machinery
damaged tool is almost always more costly s
than undertaking the regular maintenance Cable, Strap & Chain Hoist
and service of the tool.
QLD - BANYce O
65 Wentworth Pla
07 3212 8999
VIC - DANDENONG STH
24 Deans Court
03 9793 1622
WA - CANNING VALE
4/15 Baile Rd
08 9455 5574
MAINTENANCE www.tengroup.com.au
A regular maintenance schedule allows the sales@tengroup.com.au
utility to plan downtime instead of being forced
into unplanned downtime when a tool fails.
Service work can be carried out at a time when
the tool is not required or there are additional
tools available for use. TEN offers loan tools
where available and this can all but eliminate
any downtime for a depot or truck with only one
tool.
When it comes to Maintenance, Servicing and TEN’s workshops in QLD, WA & VIC offer repair, servicing
repair requirements for hydraulic tools and and refurbishment capabilities across the country, manned
equipment you really need to be able to trust by staff with extensive tool and equipment knowledge.
that your work is being carried out properly. Our These workshops stock many spare parts so that tool and
qualified staff take the guess work out of untimely equipment maintenance, service and repair time is minimal,
delays due of maintenance issues. providing an efficient service to our customers.
4 www.tengroup.com.au | Quality Construction Tools & Equipment for the Energy Industry | 07 3212 8999
the energy network
TRACK
MAINTENANCE
HYDRAULIC TOOLING
Hand Pump
• Heavy duty, metal construction for durability
• High displacements of oil per stroke
• Adjustable handle effort / dual pivot points
• Low, back saving handle effort
• External adjustable relief valves
Electric & Petrol Pumps

• High performance two-stage pump provides higher crossover
pressure for faster cycle times and equipment operation
• Ideal for use with mid to large sized hydraulic cylinders or tools
G4 Electric Series:
Max. Pressure: 10000 psi
1st Stage Flow: 400 cu. in. / min.
2nd Stage Flow: 55 cu. in. / min.
Electric G4 Series
G6 Petrol Series:
Max. Pressure: 10000 psi
1st Stage Flow: 750 cu. in. / min.
2nd Stage Flow: 100 cu. in. / min.
Petrol G6 Series
Ratchet Jacks
• Double-lever sockets for jacking in close quarters
• Drop-forged, alloy steel, heat treated components
• Plated springs to resist corrosion
• Large base insures a firm foundation
• Supports full rated capacity on the toe or the cap
RJ85A Toe Jacks

• Self-contained model for maximum versatility
TJH109LS
• Low toe heights fit in tight clearances
• The lowest handle effort for easy operation
• The lowest weights for reduced back injuries
the energy network TRACK MAINTENANCE
HYDRAULIC TOOLING
Hydraulic Steel Cylinder - Low Profile
• HD internal spring for retract assistance
• Heat treated hardened load cap is standard
• Stop ring for piston blow-out protection
• Plated piston to resist scoring & corrosion
• High flow couplers are plated to resist corrosion
• Rod wiper protects inner cylinder from dirt
Hydraulic Steel Cylinder - Flat Jack

• Plated pistons to reduce scoring & corrosion
• Steel piston for protection against load damage
• Low profile, high tonnage design
• High flow couplers
Hydraulic Steel Cylinder - Spring Return

• HD internal spring for fast retract assistance
• Heat treated load caps are standard
• Stop ring for piston blow-out protection
• Plated piston resists scoring & corrosion
• High flow couplers are plated to resist corrosion
www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 7

HANDTOOLS
Adjustable Wrenches
• Wide capacity jaw on sizes 4 - 24/100-600mm allows each tool to work
with more fastener sizes
• Tension spring stabilises jaw and knurl adjusts easily
• Wider handle on sizes 6 -12 provides more comfort & less stress on the hand
• Alloy steel and heat treated and plated finish resists rust and corrosion
Part No AC26VS AC28VS AC210VS AC212VS AC215VS AC218VS
Size 150mm 200mm 250mm 300mm 380mm 460mm
mm
Size 6” 8” 10” 12” 15” 18”
Inches
RATCHET PODGERS
4 Way Ratchet Wrench
Part No: BY-3
FOUR sizes • Four sizes in one
• Plastic ergonomic non-slip handle with grips
in ONE
D 10mm 12mm 16mm 20mm
B 17mm 19mm 24mm 30mm
6pt Hex
Part No.
Part No with Handle Size Hex
(no handle)
12pt Hex RRP1317 RRP1317-H 13 & 17mm 12pt
RRP1719 RRP1719-H 17 & 19mm 12pt
Lanyard can be RRP1824 RRP1824-H 18 & 24mm 12pt
threaded through RRP1921 RRP1921-H 19 & 21mm 12pt

anchor hole RRP1924 RRP1924-H 19 & 24mm 12pt
for added safety RRP2124 RRP2124-H 21 & 24mm 12pt
RRP2427 RRP2427-H 24 & 27mm 12pt
RRP2430 RRP2430-H 24 & 30mm 12pt
RRP3032 RRP3032-H 30 & 32mm 12pt
RRP3236 RRP3236-H 32 & 36mm 12pt
12pt Hex Part No.

Part No with Handle Size Hex Length
(no handle)
RRP36 RRP36-H 36mm 12pt 450mm
RRP36-H
HANDTOOLS
Plumb Hammers
Part No Description
11400N Fibreglass Curve Claw Hammer 20Oz/566g
11497 Hickory Ball Pein Hammer 12Oz/340g
11521 Hickory Ball Pein Hammer 32Oz/910g
PCH3 Club Hammer with Fibreglass Handle 3LB
11400N 11497 & 11521 PCH3
Mumme Sledge Hammer

• 10lb Sledge Hammer with 900mm wooden handle
• Forged from tough high tensile carbon manganese steel
• Weight 12.35lb/ 5.6kg
• 970mmL x 185mmW x 140mmD
Mumme Crowbar
• 1650mm Insulated Bar - Rubber Coated
• Made from Alloy Steel
• Non-conductive comfortable rubber coated grip bonded to steel 38mmOD
• Weight 13.54lb/ 6.14kg
• 650mmL x 750mmW x 50mmD
Ratcheting Cable Cutter

ACSR Steel Al Cu Part No: 757
• Extra-thick blades, ground flat to reduce potential for breakage
• Ratchet action for increased cutting power
• Two cutting actions - fast scissor cutting for small cable converts
automatically to ratchet mode
• Anti-slip mechanism for positive ratchet action
• Rubber boot protects ratchet mechanism
• 30mm Al, 25mm ACSR/Cu, 12.7mm Soft Steel Rod
• Weight 5.6kg
Bolt Cutters
• High-leverage jaws with shear-cut blades
• Do NOT cut steel or ACSR
• NOT an insulated tool
Part No Length Tool Weight
CJ14 350mm 2.0kg
CJ24 600mm 2.5kg
CJ36 900mm 6.0kg

EQUIPMENT BAGS
PVC - Water Resistant Bags
• PVC Equipment Bag
• Designed to carry PPE/ Asbestos gear
• Made from heavy duty PVC (flame retardant, mildew & UV resistant)
TENM516 • High frequency welded seams provide water resistance
• Internally reinforced base corners
• Velcro waterfall flap over heavy duty double lock easy slide zip
• Webbing handles & bound edges
• Double lock easy slide zip
• Plastic base insert
Part No Dimensions (mm) Weight Features
TENM510 740 (L) x 360 (W) x 330 (H) 2.0kg Detachable Shoulder Strap
TENM516 740 (L) x 360 (W) x 330 (H) 2.0kg No Shoulder strap
TENM510
Webbing shoulder High frequency welded seams
strap with 2 s/
steel snap locks provide water resistance
(detachable) Plastic base insert
Barrel Bag, PVC

Part No: TENM512
• PVC Equipment bags, red
• Made from heavy duty PVC
(flame retardant, mildew & UV resistant)
• Designed to carry PPE
• Weatherstrip over heavy duty double lock easy slide zip
• Webbing handles
TENM512 • Clear ID pocket on bag exterior
Dimensions (mm) Weight
650 (L) x 380 (Ø) 0.7kg
Barrel Bag, Canvas

Part No: TENM506
• Canvas Equipment bags, red
• Made from durable tear stop canvas (UV & mould resistant)
• Webbing handles
• Clear ID pocket on bag exterior
TENM506 800 (L) x 380 (Ø) 1.0kg
Riggers Pouch - Canvas

Part No: TENM402
• Suits riggers and pole or tower workers
• Made from red durable tear stop canvas (UV & mould resistant)
• Fold back top flap sticks down with velcro to stay in place
• Large side release buckle for harness or belt
• 2 pockets (1 large and 1 small) plus 2 external tool slots on sides
Top flap folds back • Webbing straps have heavy-duty quick release buckles
and holds in place with • Bound edges
velcro when in use Dimensions (mm) Weight
180 (L) x 70 (W) x 300 (H) 0.2kg
EQUIPMENT BAGS
Equipment Bag - PVC
Part No: TENM511
• Made from strong, lightweight 600gsm, tear proof PVC, orange
• Internal document pocket, 3 external box pockets
• Movable compartment walls (velcro)
• Fold over velcro flap
• Webbing handle & bound edges
460 (L) x 290 (H) x 130 (W) 1.0kg
Equipment Bag - PVC

Part No: TENM407
• 6 adjustable internal pockets (velcro)
• Clear internal document pocket (in lid)
• Clear external identity pocket
Safely stores all • Velcro waterfall flap over heavy duty double lock easy slide zip
• Webbing shoulder strap & bound edges
your general test
equipment 440 (L) x 330 (H) x 230 (W) 1.5kg
Earth Bag - PVC

Part No: TENM424
• PVC carry bag, red
• Ideal for Portable Earthing Devices
• Large webbing handles, easy shoulder style carry
• Velcro flap
• 1 divider
Dimensions Divider Weight
600 (L) x 160 (W) x 600 (H) 1 0.8kg
Equipment not included
CABLE PREPARATION TOOLS

Cable Strippers
• Plier type strippers, circular/longitudinal cutting with end ripping blade
• Replaceable cutting blades
• 3 x Circular cutting blades, 1 x Lengthwise cutting blade
Circular Cut Lengthwise
Part No Insulated Capacity Weight
Depth Cut Depth
PAD Models Non-insulated model, PAD12-16A No 1.2mm 1.6mm 10-45mm OD 0.75kg
black sheathed PAD30-30A No 3mm 3mm 10-45mm OD 0.77kg
PAD40-40A No 4mm 4mm 10-45mm OD 0.77kg

the energy network
CONSTRUCTION &
MAINTENANCE
CONSTRUCTION & MAINTENANCE the energy network
HOISTS
Vital Lever Hoists
• Manufactured in Japan using optimum high quality steel which conforms to
Manufactured the strict JIS & ISO regulations
to AS1418-2 • All Vital models are manufactured to comply with AS1418.2
• All Vital lever blocks are supplied with overload protection for added
security of use (excluding 250kg and 500kg models)
• Unique design of bottom hook prevents slipping and ensures safe operation
• Easy two-step operation to prevent accidental free-wheeling
• Hardened alloy steel load chain with embossed identification, marked as to
the relevant standards
• Load Chain Exceeds Australian Standards with 5:1 Safety Factor
• The Vital VLB series are suitable for all lifting applications
Rated Standard Dimensions (mm) No.
Pull to
Part No Capacity Lift Chain Weight
Lift Load A B D G C
(Tonnes) Height* Falls
VLB115L 1.6T 18kg 163 148 370 34 355 1 9.7kg
VLB130L 3.2T 1.5m 38kg 191 181 370 43 405 1 16.3kg
VLB160L 6.3T 39kg 191 244 370 47 550 2 26.7kg
*Other lengths up to 6m available
Vital Chain hoists are
suitable for pulling and
lifting applications
Tirfor
• Designed to stretch, pull or lift ropes, conductors or weights
• Lightweight, strong durable design and easy to operate
• Rope sold separately
Lifting Pulling Break

Rope Ø Length Width Weight
Capacity Capacity Load
8kN 12.5kN 8.3mm 530mm 284mm 48kN 6.9kg
16kN 25kN 11.5mm 558mm 315mm 96kN 13.5kg
32kN 50kN 16.3mm 680mm 360mm 192kN 23.5kg
Rope for TFX Series Tirfor

Rope Length Rope Ø Breaking Load
30m 8.3mm 48kN
30m 11.5mm 96kN
the energy network CONSTRUCTION & MAINTENANCE
COME-ALONGS/ GRIPS
NGK Nagaki Grips
• Made in Japan from Japanese materials
• Manufactured from high tensile alloy steel, hot forged, heat-treated,
precision machined and zinc-plated
• Safety latch on all models
• Locking nut option on some models
• Special shaped pulling eyes suit all brands of strap pullers
2TON-W-GRIP 1TON-GRIP 2TON-L-GRIP
TROLLEY-GRIP-2-L 4TON-GRIP
Jaw Safety Suitable for Wire/ Eye

Part No Min - Max Ø WLL Weight
Length Latch Cable Width
1TON-GRIP 4 - 22mm 10kN - 1.1kg Yes 17mm

Bare Cu, covered
1TON-L-GRIP 4 - 22mm 10kN 60mm 1.1kg Yes conductor & catenary 32mm
wire
2TON-L-GRIP 4 - 22mm 20kN 60mm 1.3kg Yes 32mm
2TON-W-GRIP 5 - 16mm 20kN 100mm 1.4kg Yes 32mm
3TON-GRIP 8 - 22mm 30kN 120mm 3.0kg Yes 34mm
Stay wire, catenary
wire, Cu wire & contact
4TON-GRIP 13 - 28mm 40kN 150mm 5.0kg Yes wire 25mm
6TON-GRIP 13 - 28mm 60kN 150mm 5.2kg Yes 25mm

TROLLEY-L-GRIP 5 - 16mm 20kN 100mm 1.5kg Yes 32mm
TROLLEY-GRIP-1-L* 5 - 16mm 20kN 100mm 1.5kg Yes
Catenary wire, Cu 32mm
*Locking Nut Option wire, wire rope &
contact wire NO
TROLLEY-GRIP-2 8 - 20mm 20kN 150mm 2.8kg Yes BENDING ON 25mm
TROLLEY
TROLLEY-GRIP-2-L* 8 - 20mm 20kN 150mm 2.8kg Yes
25mm
*Locking Nut Option

HYDRAULIC TOOLS
Hydraulic Kink Remover
Part No: XDH41
The overhead contact wire may have deformations as a result of problems
when unwinding the wire or through the use of pulling grips during servicing on
the overhead wire.
In order to ensure good contact between the contact wire and the pantograph,
it is necessary that the contact wire is straight.
The hydraulic kink-remover can be powered by the Klauke Hydraulic Drive Unit
AHP700L.
The kink-remover can be used on 107sqmm and 150sqmm copper, copper-
cadmium, copper-tin and copper-magnesium contact wires.
Force 40kN
In one operation the kink disappears Weight 3.8kg
Dimensions 205 x 205 x 80mm
Operating Pressure 700 Bar
Carry Case 310 x 280 x 110mm
Includes Quick coupler
Battery Powered Cutting Tool >20mmOD

Part No: ES-20-LAU
• Extremely robust design and lightweight
• Slim cutting head - ideal when space is critical
• Open head, rotatable 330°
• Easy one-button operating concept for controlling all tooling functions
• Automatic retraction when operation is complete
• LED illuminates work area
• Red LED & acoustic signal in case of failure
• Makita high performance 18V lithium-ion battery, short charging time
• Multifunction LED for maintenance display and data transfer via optional
interface and USB adapter
• Includes 18V/1.5Ah Li-Ion Battery, Charger & Heavy Duty Plastic Case
Cuts ACSR, Al, Cu, Steel Rope
Cutting Range >20mmOD
at
Intelligent toolstithvity
Cutting Force 23kN/ 2.3 Tonne
Cutting Time 2 - 4 Seconds depending on cable
increase produc
Tool Weight 2.0kg including battery

Part No: ES-32LAU
Cuts Al, Cu
HYDRAULIC TOOLS
Part No: ESG-25-LAU
• High-performance cutting for highly-flexible conductors and wire cables
• Closed head, flip top style, rotatable 330°
Cuts ACSR, Al, Cu, Steel
Cutting Force 60kN/ 6 Tonne
Battery Powered Cutting Tools 6T & 12T

• Closed cutting head with bolt interlock, flip top style, under no pressure
rotates 360°
• Electronic control and monitoring of operation
• One-button operating concept for controlling all tooling functions
• Balanced centre of gravity for easy handling and effortless operations
• LED for workplace illumination
• High-performance 18 V Li-Ion battery - high capacity, short charging time
• 2-stage hydraulic system with fast feed and power stroke
• Quick motor stop for high user safety
ESG-45-LAU • Automatic retraction when operation is complete
• Manual retraction in case of need
• Manual retraction stop (MRS) for efficient operations
Part
ESG-45-LAU ESG-85-LAU ESG-105-LAU
Number
ACSR, Al, Cu,
Cuts Armoured, Round Al, Cu, Light Armoured Al/ Cu
Steel 20mmOD
ESG-85-LAU Cutting
>45mmOD >85mmOD >105mmOD
Range
Cutting
Scissor Style Force
60kN/ 6 Tonne 60kN/ 6 Tonne 120kN/ 12 Tonne
Cutting Heads Tool 5.7kg including 6.6kg including 10.3kg including
available on Weight battery battery battery
ES-85-LAU
all models

HYDRAULIC TOOLS
Battery Cut, Crimp & Punch Multi Tool
One head for
Part No: EK-120UNVC-LAU
crimping, cuttin-g
• Ideal for field operations - all common jobs can be carried out with one tool
• Fast working due to 2-stage hydraulics
and punching
• Universal head flip-top style, rotatable 330°
one tool for all

• Automatic retraction when operation is complete, manual option if needed
• Manual retract stop with "teach-in" (MRS+) for positioning control in case of
multiple crimpings
• Includes 18V/3.0Ah Li-Ion Battery, Adaptor for crimping dies, Charger &
Heavy Duty Plastic Case
Cuts ASCR, Al, Cu, Armoured, 13mm Steel Rod, 15mm Guy Wire
Cutting Range 40mm
Crimping Force 108kN/ 11 Tonne
Crimp range 400mm2 Cu / 300mm2 Al
Punching Capacity Up to 144mm round, Up to 138mm x 138mm square
ADAPTERS - Crimping
Adapter for crimping dies UA12TKL
ADAPTERS - Cutting
Cutting die for Cu/Al conductors, ACSR up to max. 40mmØ UCACSR
Cutting die for Cu/Al conductors without armouring up to max. 26mm Ø UC26
crimping
Cutting die for threaded rods M5 metric UCM5
Cutting die for threaded rods M 10 metric UCM10
Cutting die for threaded rods 1/4" UCUNC14
cutting
Cutting die for DIN rails 35 x 15 UCD3515
Cutting die for DIN rails 32 x 15 x 9 UCD3215
Cutting die for DIN rails 35 x 7.5 UCD3575
Cutting die for DIN rails 2980 UCN2980
Cutting die for laminated Cu bus bars, max. width 37.5 mm UCF
Cutting die 107mm² type AC for catenary wires in railway construction UCAC107
Cutting die 85mm² type BC for catenary wires in railway construction UCBC85
punching
ADAPTERS - Punching
For round punches up to 144mmØ, 138x138mm and 68x138mm UA12P
Punching die for DIN rails, 35x15, 32x15x9, 35x7.5 UPD6
HYDRAULIC TOOLS
Battery Powered Crimping Tool 12T
Part No: EK-12042-LAU
• C-Head with 42mm opening width and wide crimping range to 400mm²
• Up to 60% less crimping operations compared with 6 Tonne tools
• Easy handling by optimum weight distribution
• Integrated pressure measurement with visual and audible signals in case of
failure
• Evaluation function using optical interface and USB-Adapter
• High-performance motor for maximum operating speed
No.1 Seller
• Automatic retraction stop (ARS) for positioning control in case of multiple
crimpings
Crimps Cu 400mm, Al 240mm, ACSR 185mm
Klauke Crimping & Cutting Tools Crimping Force 120kN / 12 Tonne
USB Adaptor - Part No: PGA1 Stroke/Opening Width 42mm
Allows downlo ads of Head Rotation 360°

tool crimping data Tool Weight 6.8kg including battery

Part No: EK-425-LAU
• One handed ergonomic design with single push button operation
• Suitable for ABC (3 ABC Dies Included) and up to 240mm2 Cu/Al
Head Rotates 360° • Automatic retraction once crimp is completed
• Integrated pressure test with optical and acoustical signal in case of failure
• Autostop function
• LED Light Illuminates working space
• Red LED display and acoustic signal in case of fault
Red LED • High performance 18V Lithium-Ion-battery - Charges in 22 Mins
Ergonomic single display and
push button acoustic signal • Crimp head rotates 360°
operation in case of fault • Multi-functional LED indicates maintenance and battery control
• Manual retraction does not rely on battery power
• Includes 2 x Crimp Head (CJD3BG & CJ22), 3 x ABC Dies, 1 x Cutting Die,
18V/3.0Ah Li-Ion Battery, Charger & Heavy Duty Plastic Case
LED Illumination of
workspace 50kN force in a lightweight tool of only 2.6kg
Genuine Makita Crimps Cu/Al 240mm2, ACSR 185mm2
Li-Ion Battery Crimping Force 50kN / 5 Ton
Stroke/Opening Width 40mm
Head Rotation 360°
Crimp Styles
Die Type CJD3BG CJ22

HYDRAULIC TOOLS
Klauke Hydraulic Drive Unit 700bar
Part No: AHP700LC
+ • Compact and lightweight design for mobile field application
• Suitable for operating single acting crimping and cutting tools of 700 bar
-
• Selector switch for crimping, cutting and punching operations
• Fibreglass reinforced polyamide shock proof housing
• Large display indicates function selection, pressure readings, battery
condition and diagnosis information
• Automatic retraction
• Remote control with cable for easy operation
• All high pressure hoses are supplied with coupling plug and coupling sleeve,
filled with oil
6.4kg with • Two powerful Makita 3.0Ah,18V Li-Ion batteries
2 batteries • Cushioned shoulder strap for optimum wearing comfort
s
1 Pump - Multiple Head
100T
7.7kg Crimping
3.5kg
105mm Armoured Cutting Head Head
Part No SDG105C Part No Multi Head
PK1000C Crimping/Cutting/Punching
33kg with dies Part No PK120UNVC
4.3kg 40mm
85mm Armoured Cutting Head Cutting Die
Part No SDG852C Part No
25T UCACSR
Crimping
Head 12T Die
3.8kg
Part No Adaptor
45mm Armoured Cutting Head PK252C Part No
Part No SDG45C 5.3kg UA12T
Punch
Adaptor
12T Part No
5.2kg UA12P
Crimping
85mm Cutting Head ACSR/ Steel
Head
Highly
Part No SDK85C
Part No
PK12042FPC
4.5kg
Versatile
2kg
Cutting Head
Part No SDK20P33MC
Drive unit with Drive unit with

press head cutting head
RATCHET CUTTERS
ACSR Steel Al Cu Small ACSR Ratcheting Cable Cutter
Part No: 63607
• Cleanly cuts 336 MCM Linnet ACSR and 2/0 triplex steel catenary cable
• High-Leverage ratchet mechanism for single-handed cutting of copper and
aluminium cables, leaving no burrs or sharp edges
• Patented two-step ratchet mechanism requires fewer strokes per cut
• Quick-release lever opens blades easily in every cutting position
(Allows removal of the cable before completion of cut)
63607 • Handle locks in closed position for storage and transportation
Breaking Blades? rs
lu ti o n - AC S R C u tte
ACSR Steel Al Cu So
ACSR Ratcheting Cable Cutter
Part No: REL-9009
• Convenient single handed operation
• Full ratcheting cycle and release in all cutting positions
• Handle locks in closed position for storage and transportation
• Ergonomic rubber handle design to maximise cutting leverage
REL-9009

Part No: K1062
• Lightweight design with great cutting performance
• One-hand operation
• Effort-saving 2-stage ratchet system
K1062 • Non-slip handles
• Not suitable for cutting steel or steel wire
Al Cu Cable Dimensions Max Diameter Length Tool
Part No
Cu Al ACSR / St / Guy OAL Weight
REL-9009 15mm 18mm ACSR - 14.7mm, Steel – 4.7mm 270mm 0.5kg

63607 16mm 20mm ACSR - 15mm 260mm 0.7kg
REL-35 K1062 52mm 52mm - 280mm 0.7kg
REL-35 32mm - 255mm 0.7kg

ACSR Steel Al Cu Part No: 757
• Extra-thick blades, ground flat to reduce potential for breakage
• Ratchet action for increased cutting power
• Two cutting actions - fast scissor cutting for small cable converts
automatically to ratchet mode
• Anti-slip mechanism for positive ratchet action
• Rubber boot protects ratchet mechanism
• 30mm Al, 25mm ACSR/Cu, 12.7mm Soft Steel Rod
• Weight 5.6kg
Bolt Cutters
• High-leverage jaws with shear-cut blades
• Do NOT cut steel or ACSR
• NOT an insulated tool
Part No Length Tool Weight
CJ14 350mm 2.0kg
CJ24 600mm 2.5kg
CJ36 900mm 6.0kg

TENSION METER
Dillon Quick-Check Tension Meter
Part No: AWT05-508111
The Dillon Quick-Check Tension Meter quickly measures tension in cable
guardrails, guy lines and overhead wires. It installs, measures and removes
in seconds. The digital loadcell is highly accurate and requires no lookup or
correction tables.
• Store wire rope readings and export data (Ideal for tower data collection)
• Time saving check-tensioning mode
• Portable and rugged – designed for outdoor use
• Built-in averaging saves time and eliminates errors
• Factory calibrated for up to 20 unique wire sizes and types
Specifications
The fastest cable

Tension Capacities 10 kN/1000 kg or 45 kN/4500 kg
tension meter
Wire Sizes 4.75 mm through 25.4 mm
+ 3% instrument capacity (calibrated to specific wire
Accuracy
size and type)
Loading Error Cable elongation of only 2mm
Dot-graphic LCD display supports full text and 25mm
Display
high digits
• Tower and stack guy wires Sheave Range

Each set accommodates rated wire size and 12mm
smaller. Multiple sheave sets may be used.
• Cable barriers Calibrate each wire diameter needed with the most
• Overhead transit wires Suggested Wire appropriate sheaves. If two wire types are used of
• Public Utilities Calibrations different diameters (e.g. 17-2.75 & 19-2.00), calibrate
each type independently.
• Fall arrest Environment Protection Suitable for continued outdoor use
• Aircraft cables Operating Range -20° C to 70° C
Tension Units Of
Pound-force, Kilogram force, Newtons
Measure
Resolution Configurable low/med/high
Size 250 x 590 x 80 mm
Weight Approx 5 kg
At user discretion. Commonly 12-24 months; should be
Recalibration
more frequent with heavy use.
RS-232 port Approvals CE
The Fastest Cable Tension Meter

The Dillon Quick-Check can be placed on a cable, measure its tension, and
removed in under five seconds! There are no complex lookup tables, no
conversion charts. The operator can quickly select from 20 different wire sizes
Carry case included and types stored in Quick-Check’s memory. The Check-Tensioning mode
graphically displays the current and target
tensions for extremely quick setting of
line tension. Even the infrequent
battery changes are quick.
Broad Application
The Quick-Check can be employed in any
industries to ensure proper tensioning. Typical
applications include tower and stack guy wires,
pretensioned cable barriers, bridges, elevators,
winch rope, overhead electric transit wires, fall
arrest systems, aircraft cables and utilities.
TENSION METER
420mm
198mm 181mm
230mm
616 - 730mm
Quick-Check Red Quick-Check

Tower and stack guy wires, cable barriers, overhead transit wires, bridges, fall arrest, stage
Industries
support, aircraft cables and public utilities
Capacities 1,000 kg or 4,500 kg
Rope Calibrations Up to 20 (must be specified at time of order) Up to 15 (must be specified at time of order)
Cable Diameter Range 4.75mm to 25.4mm
Informative Display: Shows: Unit, Wire Type,
Display Shows: Unit, Wire Type & Battery
Sheave & Battery
Date and Time Included No
Calibration Reminder Included (setup by distributor) No
AZT (Automatic Zero Tracking) & Filtering Configurable AZT and Filtering Fixed
RS-232 Port 4-Pin Lemo RS-232 output No
Carry Case Included Optional
Enclosure Suitable for continuous outdoor use
Units of Measure Lbf, kgf and Newtons
Temperature Range -20° C to 70° C -20° C to 60° C
Backlight Included (configurable intensity and timer) No
Power 2 - AA Batteries
10Hz = over 250 hrs continuous
Battery Life - Tested with backlight off N/A
Accuracy 3% Full Scale
User’s Manual Included, CD
Pass/Fail Tensioning Mode Yes
Warranty 2 Years
Weight 5kgs
Stores wire rope readings to be exported later
Tower Mode No
(Stores each Leg and Wire)
Quick-Check Calibrated to most popular Yes, now available as a new P/N, see price sheet
No
Cell Tower Guy Wires for details

DYNAMOMETERS
Dillon Mechanical Dynamometers
• Accuracy ±0.5% of full range
• Max hold feature
• Accurate readings from varying sight lines with fog and scratch resistant dial
• All units include calibration certificate and manual
• Corrosion resistant and supplied with carry case
• Option of 125mm or 250mm dial size
Part No Capacity Kg Ultimate
Safety
125mm Dial Tonne Division Factor
30006-0134 0.5T 5 5:1
30006-0159 1.0T 10 5:1
30006-0126 2.0T 20 5:1
30006-0167 4.0T 25 5:1
NGK Dynamometers
NGK Dynamometers are lightweight, compact and plated to resist corrosion.
All models feature a large face dial for easily reading measurements.
• Precise measurement of tension and loads
• Kilogram/force (kN) large face dial display
• Accuracy ±3%
• Plated to resist corrosion
Graduation Dimensions
Part
Capacity (Gauge Wt
No A B C
Increments)
A-10 Model A-10 10kN/1T 200N/20kg 135mm 65mm 28mm 0.8kg

A-20 20kN/2T 500N/50kg 135mm 65mm 28mm 1.2kg
A-30 30kN/3T 500N/50kg 150mm 80mm 28mm 2kg
A-50 50kN/5T 1kN/100kg 260mm 95mm 28mm 3kg
Used to measure tension in cables and conductors, the NGK

tension meter features two pulling eyes, connected to an
analog indicator. This allows the user to accurately monitor
A-30 Model
tension and adjust equipment and loads accordingly.
Dillon Digital Dynamometers

Part No: EDJR Series
• Accuracy 0.2% of capacity
• Soft key interface with programmable functions
• Rounded edges prevent binding or snagging
• Corrosion resistant and supplied with carry case
EDX-10T Part No: EDX Series
EDJR-2T
• Accuracy 0.1% under 50,000kg, 0.3% over 75,000kg
Part No Part No
Capacity
(0.1% Accuracy) (0.2% Accuracy)
EDX-1T EDJR-1T 1T
EDX-2T EDJR-2T 2T
EDX-5T EDJR-5T 5T
EDX-10T 10T
IP55 designed
for weather and
water resistance
OVERHEAD ROLLERS
Universal Stringing Roller
Distribution
Part No: SPP-1A
• Suitable for distribution and ABC
& ABC
• Aluminium sheave
• Lightweight high strength heat treated aluminium
• Versatile attachment fittings include side and bottom tags and top ball
socket fitting
• Side gate latch can be locked open
• Sheave is profile machined permitting precise sagging of conductor
• High quality permanently lubricated high temperature precision bearings
Bottom of
Maximum OD Overall Overall
WLL Weight Groove
Conductor Height Width
Diameter
50mm 1130kg 4kg 110mm 370mm 205mm
Universal Roller Bracket - Suits SPP-1A

Part No: SPP-1A-BKT
• Versatile mounting bracket for crossarms and poles
• Frame made from Cast Aluminium
• Lightweight, easy to install
• Heavy Duty Strap and Zinc Plated Ratchet Assembly
• 3 Mounting holes for various configurations
• Ball pin to secure roller
Min Cross Arm Size Suit Poles OD WLL Weight
100 x 100mm 200-470mm 600kg 2kg
SPP-1A Roller sold separately to
SPP-1A-BKT Roller Bracket

LEWIS CABLE SOCKS

Underground Cable Socks
• Coated galvanised cable, reverse weave, and a single wire bail but will not
have metal shoulders
• Identified by tags beneath the heavy duty clear tubing
Part No. Range UTS Length
TCS-UG06 6-13mm 8.18kN 304mm
TCS-UG13 13-19mm 9.09kN 355mm
TCS-UG19 19-32mm 26.6kN 610mm
TCS-UG31 32-51mm 33.3kN 810mm
TCS-UG50 51-70mm 60kN 965mm
TCS-UG69 70-89mm 73kN 1165mm
TCS-UG88 89-108mm 86.7kN 1320mm
TCS-UG108 108-124mm 93.4kN 1470mm
TCS-UG124 124-140mm 110kN 1625mm
TCS-UG140 140-153mm 110kN 1625mm
TCS-UG152 153-171mm 110kN 1625mm
TCS-UG171 171-203mm 110kN 1625mm
Overhead Single Soft Eye Cable Socks

• Powerful socks for pulling big conductor smoothly through pulleys
• Made of high quality flexible aircraft strand steel, integrated with a
flexible eye
• Eye is composed of braided strands (rather than being rigid) to give
maximum flexibility going around angle pulls or through small openings
• Sock strands are retained at the head by a stainless steel spring, eliminating
rigid compression sleeve
Approx.
Work Load
Part No. Range Break Mesh Eye
3:1
Strength
TCS-OH05 5mm- 12mm 5.45kN 16.8kN 558mm 101mm
TCS-OH12 12mm - 22mm 10.9kN 45.4kN 1066mm 152mm
Standard Swivels
• Swivels for connecting pulling rope to cable sock
• For Overhead or Underground application
• Made from high tensile galvanised and corrosion protected steel
• Chamfered edges allowing smooth passing through rollers or conduit
• Special design can bear high radial loads. Thrust bearings designed to
avoid torsion strain accumulation
Max
Diameter Overall
Part No Rope Size Break Load Weight
OD Length
OD
GGT001 10mm 70kN 28mm 106mm 0.3kg
GGT010 13mm 110kN 40mm 143mm 0.9kg
GGT020 18mm 220kN 54mm 184mm 2.1kg
GGT030 24mm 360kN 60mm 234mm 3.4kg
GGT040 28mm 750kN 77mm 322mm 8.2kg
ROPE
Telecommunications & Fibre Optic Rope
• 6mm in diameter with 2 Blue and 1 Yellow strand
• Tangle free uncoiling to coil end, no waste
Break
Part No OD Length Colour
Force
ROS0614 6mm 400m
Blue/Yellow 602kg
ROS0652 6mm 500m
Titan Braid Rope

• Manufactured with a braided polyester cover over a braided nylon core
• Ideal for use as winch or /and tow lines and for setting underground cable
Characteristics Applications
• High strength • Winch lines
• High UV resistance • Tow lines
• Splicable • Rigging lines
• Flexible • Pulling and stringing line
More sizes Part No OD Length Average Tensile
available 26127-100 12.7mm 100m 4,300kg
Contact TEN 26143-365 14.3mm 365m 6,400kg
26191-365 19.1mm 365m 10,500kg
26222-365 22.2mm 365m 13,200kg
26222-500 22.2mm 500m 13,200kg
SupreemX-12 - Dyneema Fibre Braided Rope

• Manufactured with Dyneema® fibre and coated with polyurethane
• 12 strand braided rope
• Polyurethane coating adds additional abrasion resistance for longer life
• Extremely high strength • Winch lines
• Light weight • Tow lines
• Abrasion resistant • Alternate to wire rope
• Low stretch • Rigging lines
• Neutral buoyancy • Utility line
An excellent
• Splicable alternative
• Flexible to wire rope
Part No OD mm Average Tensile
12.7mm SupreemX loaded on a
TESMEC 35kN Winch 02064-* 6.4mm 3,950kg
02079-* 7.9mm 6,000kg
02095-* 9.5mm 8,400kg
02111-* 11.1mm 10,600kg More sizes
02127-* 12.7mm 15,360kg available
02143-* 14.3mm 18,700kg Contact TEN
Super
02159-* 15.9mm 23,800kg
-* Specify length in metres
Strength

HYDRAULIC PULLERS
15kN Hydraulic Puller
Part No: ARS200 Series
• Ready for immediate use on site
• Quickly mobilised and placed in working position
• Full training & Risk Assessment provided
• Used for overhead stringing and underground cable hauling
• Single rope stringing
• Negative self acting hydraulic brake
• Bull wheels made of wear proof thermally and chemically treated steel
• Hydraulic dynamometer with set point & automatic control of maximum pull
Overhead &
• Built in reel winder with automatic level wind and special reel for 500m of
8mm Ø Rope
Underground
• Closed hydraulic circuit for stepless speed variation in both rotating directions
• Cable guide pivot pulley suitable for work in any underground situation
• 12VDC electrical system
Performance: Options:
Max pull 15kN Standard Road Trailer
Max speed at pull 0.7km/hr Skid
Max speed 3.6km/hr 8mm Dyneema Braided Rope
Pull at max speed 4kN Swivel Guide Rope Roller - ALL111
Engine Output 13kW
Bull wheel Ø 200mm
Rope Ø 8mm
ALL111 Optional Extra
Underground Cable Pivot Guide Weight (No fluids) 500kg
HYDRAULIC PULLERS
The ARS403 Hydraulic Puller is suitable to string one rope. The bull wheel
grooves are made of wear proof thermally treated steel.
• Used for overhead and underground pulling
• Negative self-acting hydraulic brake
• Hydraulic dynamometer with set-point and automatic control of max. pull
• Hydraulic oil cooling system
• Control instruments for hydraulic system and diesel engine
• Rigid axle for towing at max speed of 30km/hr
• Built-in reel winder with automatic level wind, suitable for standard reel
BOF010 and BOF020 (AXR001 included)
Site Trailer • Electronic pull and speed recorder kit (instrument not included)
• Pull pre-setting system
• Mechanical front stabiliser
• Grounding connection point
Hydraulic Transmission
Closed hydraulic circuit for stepless speed variation in both rotating directions.
Max speed at pull 1.2km/hr Mine Spec Road Trailer
Max speed 3.6km/hr Site Trailer
Pull at max speed 12kN Pull Recorder - DLR300
Engine Output 25kW U’grd Cable Pulling Attachment - ALL110
Bull wheel Ø 325mm Swivel Guide Rope Roller - ALL111
Rope Ø 13mm Extra Shaft - AXR001
Weight (No fluids) 980kg
Standard Road Trailer Underground Swivel
(Optional)
Optional
Road
Operator protection with
cage mount and side rails
Trailers
In-built
dynamometer
Anti-twist braided
galvanised wire
(High strength synthetic
ALL111 Swivel guide rope available)
rope roller SOLD SEPARATELY
Provision for connection

to pull recorder
Electric brakes
DLR300 Electronic pull standard Toolbox complete
and speed recorder Robust galvanised with wheel chocks
tandem trailer and spill kit
Added safety requirements to meet mine specifications

Mine Spec
Road Trailer

CAPSTAN WINCH & ELECTRIC CABLE PULLER

CableGlider® Cable Puller Standard
Power Pack with Foot Switch
Part No: 08610900AU
Floor/Pole Mount Bracket
Versatile!
Part No: 08674005
The STD Cable Puller offers portability and ease of set-up in a completely self-
contained unit to adapt to a variety of pulling situations. It comes equipped with
a three-speed removable power pack, providing up to 28.9kN of pulling force
Configures at low speed. Speed changes occur with just the turn of a dial.
to a variety Design features include a self-tailing capstan for added stability, a pivoting arm
and a foot switch for operator convenience and safety. It accepts all diameter
of power, rope (self-tailing capstan accepts 16mm to 22 mm rope only).
fibre optic
08674857 CableGlider® Kit includes:
and other • Puller
cable pulling • Floor Mount
situations • External Frame Kit
• Split Fork Adapter
• Conduit Adapters: 51mm (2”), 76mm (3”), 89mm (3½”), 102mm (4”),
127mm (5”), 152mm (6”) Split Conduit Adapters
• 365m x 16mm double braided rope
• Accessories tool box
Low/Low Low/High High/High

PULLING FORCE
Standard Kit [08674857] Speed Speed Speed
Maximum 28.9kN 15.6kN 4.4kN
Continuous 17.8kN 8.9kN 1.1kN
PULLING SPEED
No Load 5.3m/min 12m/min 23.5m/min
At 8.9 kN 4.1m/min 5.7m/min —
At 17.8 kN 2.9m/min — —
At 26.7 kN 2.1m/min — —
Power Requirements
Power Supply 230 VAC @ 5 Amps Min
PEAK POWER 4.7 HP (3.5kW)
GENERATOR 4000 Watt Recommended
Capstan Self tailing, 14cm diameter, 11.2cm width
Weight Tool Weight 102kg / Packed Weight 120kg
Dimensions 147cm L x 69cm W / Max Reach 2m
Floor/Pole Mount Conduit

Part No Powerpack Rope
Bracket Adaptors
08674005 No No Yes No
08610900AU Standard No No No
08678025 Standard No No Yes
Cable Glider with Conduit 08674857 Standard Yes Yes Yes
Adaptors [08678025]
DRUM WINCHES & BRAKES
WirePilot 3T Disc Brake (Fail Safe) Drum Skid
Part No: WPSDB-1S
The WirePilot WPSDB-1S is a standalone single drum stand with fail safe
brake capabilities. The hydraulic fail safe brake system is constantly engaged,
requiring the operator to use the hand pump to increase the systems hydraulic
pressure in order to disengage the brake.
This system is designed to provide and allow safe braking for a single drum. The
braking force and thus winching speed is manually controlled by the operator
through hydraulic valve adjustment.
The WPSDB-1S is a standalone system made up of 1 x Cable Drum Platform.
BRAKING
• 1. The ability to adjust the brake force required
• 2. The ability to allow the Drum to free-wheel
• 3. The ability to control the pump manually/hydraulically
• 4. Automatic Fail-safe Braking
OPERATIONAL SPECIFICATIONS
• Drum Stand Size - 1650 x 1170 x 1300mm
• Drum Stand Weight - 1250kg
• Drum Stand Mounting - 4x Container Locks,1450 x 1000mm Centres
• Max. Drum Weight - 3000kg
• Max. Drum Diameter - 1300mm
• Max. Drum Width - 975mm
• Brake Tension Resistance @ 1m Drum Diameter - 750kg
WirePilot 3T Winch (Fail Safe) & Brake Skid

Part No: WPSDBS-1S
A single drum cable drum Winch and Brake stand employed for the
reconductoring or new conductoring of overhead and underground cable by
either hydraulic winching, hydrostatic braking or friction braking of 1 conductor
under tension from a cable drum.
• Capable of a winching force of 1500kg @ 1m Diameter @ 10rpm and
lighter cable tensions up to 75rpm
• Drum may be operated to high torque low speed or low torque high speed
• Various Models Available via a high / low range switch
• Model Shown Includes Optional Extras • Winch drive can also be operated as a braking unit via a toggle switch
enabling 1500kg @ 1m braking force up to 60rpm
• Drum frame is also fitted with a friction braking system capable of applying
a cable resistance tension of 400kg at 1m drum diameter and can be used
when the power pack is not connected or running
• Braking system is fail safe and must be activated to release the brake
• The winching and braking force can be controlled by the operator from zero
to full tension
• Drum skid and power pack capable of being mounted to a container sized
flat bed truck or trailer
• Foot print physical size is a maximum of: 1600mm Long x 1600mm Wide x
1650mm High with a 1300mm diameter drum installed
• Main structural components are hot dip galvanised, all other components
are powder coated
• Operator has full control of winching and braking operations from the
manual controls with the option of an electrical corded controller
• Operator has control to operate via hydraulic hand pump to brake the drum
when the power pack is not running
• Formal risk assessment training according to AS 31000 - 2009
Full control of winching and
braking operations from
manual controls with option of
electrical corded controller
HEIGHT SAFETY EQUIPMENT

Miller Aircore Harnesses
• Lightweight components specifically chosen to reduce fatigue for all-day
endurance and increased productivity
• Corrosion-resistant and longer lasting aluminium hardware
• Quick operating cam buckles on the shoulder straps make vertical webbing
adjustment easier
• Quick-connect leg and chest buckles for fitting/removing harness
• Heavy duty 18kN chest buckle for extra security
• Aluminium frontal D-ring and rear fall arrest D-ring with fall indicator
• Work positioning side D-rings for working with pole straps
• Equipped w/confined space webbing loops for attachment to spreader frame
Size TOWER WORKER SOFT LOOPS HARNESS
S M1020227
M-L M1020228
XL-XXL M1020229
Weight 2.7kg
Applications Tower work, Ladder work, Pole top, Line workers
Certified to Australian and New Zealand Standards
Standards
AS/NZS 1891.1 - 2007
Huge
Range Harnesses
Available M1020056 Elite.2 TOWER WORKER M1020008
Contact TEN
Construction & Maintenance
Confined Space (Top Sides)

Elevated Work Platforms
Ladder Safety Systems
Fall Arrest (Back Top)

Static Line Systems
Positioning (Side)
Work Positioning
Tower Climbing
Confined Space
Frontal (Front)
Order Pickers
Warehousing
Tree Pruning
Roof Work
Harnesses
Description Part No Industry Application Features

Revolution Tower M1020056 P P P P P P P P P P P
Revolution Vest Style M1020008 P P P P P P P P P P P
Line Worker ELITE.2 P P P P P P
Tower Harness TOWER WORKER P P P P P P P P P P
Fall Restraint/Anchor Point

Part No: 3861
• Lightweight anchor point
• Ideal for work from ladders or platforms
• For wood, concrete or steel poles
• Provides isolation from potential electrical hazards
• U-Bolt for lanyard connection
• Foam filled fibreglass shaft with cast aluminium pole bracket
UTS Fibreglass Shaft Nylon Strap length Weight
2,265kg 150mm 1.1m 4.5kg
HEIGHT SAFETY EQUIPMENT
Fall Arrestor
Part No Length Weight
1011742 10m 5kg
• Unique side payout reduces entry guide and cable wear

• No annual factory re-certification lowers costs and downtime
• Load indicating hook identifies unit removal from service
• 4.5mm x 10m galvanised steel cable, 1200daN min break, 17mm opening
1011742
Manyard, Energy Absorbing Lanyard
• Contracts from 1.8m to 1.2m to reduce tripping, snagging or dragging
• Specially woven shock absorbing inner core reduces fall forces
• No energy absorber “pack” makes it more comfortable to use
• Heavy duty tubular outer sleeve serves as a back up lanyard
• Unique warning flag provides visual proof of a sustained fall
• Grid label allows easy recording of inspection dates
Part No Length Hooks Weight
M1010024 2m 2 x 19mm 1kg
M1010024
Lanyard, Stretchstop with Energy Absorber

• Elastic inner core contains the unextended length of webbing
• Integral compact energy absorber
• Outer load bearing tubular polyester webbing gives strength and durability
• Available in a variety of lengths and hook options
Part No Length Hooks Webbing Weight
L11SEC1.5
L11SEC1.5 1.5m 2 x 19mm Single 0.5kg
Safety Tie Off

• Quick and easy set up of temporary anchorage
• 1m strap with dee ring one end and reversed eye the other
• Protective sleeve prevents webbing wear
Part No Length Hooks Weight
ME10091.6 1m Dee Ring/ Reversed Eye 0.5kg
ME10091.6
Pole Straps
• Fitted with an adjuster to easily adjust working length
• Protective sleeve lengthens life of webbing
• Double acting 19mm opening hooks at each end
• 138.1S-SP features 1 x double action hook, 1 x triple action karabiner
136.1S 1.8m 3kg
136.1S 138.1S-SP 2.4m 3kg

138.1S 2.4m 3kg
139.1S 2.7m 3kg
Karabiner
• Industry karabiners for industrial purposes
Part No Description Rating Specification
91326
Triple Acting, 14mm Opening,
91326 Karabiner 30kN
Captive D, Forged Steel

SLINGS
Round & Flat Lifting Slings
• Round slings to AS4497
• Flat slings to AS1353
Loading
1.0 0.8 2.0 1.7 1.4 1.0
Factor
Lift Mode Vertical Choke Basket 60° 90° 120°
Round Flat
* Standard * Standard Sling
Sling Sling WLL (Tonnes)
lengths (m) lengths (m) Colour
Part No Part No
0.5, 0.75, 1, 1.5,
1, 1.5, 2, 2.5,
SLR1-* 2, 2.5, 3, 4, 5 SLF1-* Violet 1 0.8 2 1.7 1.4 1
3, 5 & 10
&6
0.5, 0.7, 1, 1.5, 2, 1, 1.5, 2, 2.5,
SLR2-* SLF2-* Green 2 1.6 4 3.4 2.8 2
2.5, 3, 4, 5 & 6 3, 4, 5 & 6
1, 1.5, 2, 2.5, 3,
SLR3-* SLF3-* 2, 3, 4, 5 & 6 Yellow 3 2.4 6 5.1 4.2 3
4, 5 & 6
1, 1.5, 2, 3, 4,
SLR4-* SLF4-* 3&4 Grey 4 3.2 8 6.9 5.6 4
5&6
SLR5-* 2, 3, 4, 5 & 6 SLF5-* 4 Red 5 4.0 10 8.6 7.0 5
2, 2.5, 3, 4, 5
SLR6-* SLF6-* 3 Brown 6 4.8 12 10.3 8.4 6
&6
SLR8-* 2, 2.5, 3, 4 & 6 SLF8-* 3 Blue 8 6.4 16 13.8 11.2 8
SLR10-* 3, 4, 6, 8 & 10 SLF10-* - Orange 10 8.0 20 17.3 14.1 10
Example: SLF1-1.5 - Sling Flat WLL1 x 1.5m length
LADDERS
Powermaster Fibreglass Extension Ladders
• High strength durable box rails
• Light weight
• Twist and sway resistant
• Weather resistant
• Patented latch system
• Swivel feet with urethane studs and gravel spikes
• Spring rope retraction
• Non-slip “D” profile rungs
• Non conductive safety yellow fibreglass
Performing tasks • Side pull standard
• Complies with AS/NZS1892.3.1996
quickly, safely
and efficiently. Part No Retracted Extended WLL Weight
FED 3.4 2.4m 3.4m 160kg 12.0kg
FED 4.0 2.7m 4.0m 160kg 15.5kg
FED 5.2 3.3m 5.2m 160kg 18.5kg
FED 6.4 3.9m 6.4m 160kg 21.6kg
FED 7.6 4.5m 7.6m 160kg 27.1kg
FED 8.8 5.1m 8.8m 150kg 31.5kg
FED 9.4 5.7m 9.4m 140kg 35.5kg
FED 9.8 5.8m 9.8m 120kg 35.5kg
RESCUE KITS & LIVE WORKING EQUIPMENT
Low Voltage Switchboard Rescue Kits
Part No: LVRK-P
Kit Contents
Individual Item
Description
Part No
E014R-11 Gloves Pair - 1000V Class “0”
RK-LVHOOK Rescue Hook – Insulated Plastic
RK-TORCH LED Torch - Weatherproof with swivel hook & magnet
RK-FIREBLKT Fire Blanket 1.2m x 1.8m - AS/NZS3504
RK-BANDAGE Bandage, Multi Trauma Dressing 250 x 750mm
RK-SIGN Hanging Sign – “Isolate Here In Emergency”
3218 First Aid Quick Reference Guide
TENM525 PVC Bag – ‘LV Rescue Kit’ with divider & shoulder strap
RAWD091 Card listing contents and Next Test Date table
Weight 3kg
High Voltage Switchboard Rescue Equipment

Part No: SBRKITHV
• Supplied to customer specifications
• Other components & kits available
SAMPLE KIT ITEMS

• Gloves Pair – Rated over working voltage (5, 10, 20, 30 & 40kV available)
• Rescue Hook – Rated over working voltage (5-225kV available)
• Torch - Weatherproof
• Blanket – Fire
• Dressing – Trauma
• Tag – “Isolate Here In Emergency”
• Mat – Insulating Rubber Ground (5, 10, 20, 30 & 40kV available)
• Suit – Arc Protective
• Shield – Face, Arc protective
• Platform – Insulating (Indoor or outdoor, 24-63kV available)
• Bag – Carry Case (Made specifically to suit components) *
* Minimum order quantities may apply
TEN has access to all individual items to

make up your required Rescue Kits
Rescue Stick/ Hook

Part No: SBRKITHV
• Insulated Handles
• Hastings models use in conjunction with A30002 handguard
• Hastings model insulated sticks tested to 100kV for 300mm
• Catu Models supplied with permanent handguard and wall mount
Part No Length Standard Weight
848-1 2.3m 3.4kg
ASTMF7-11
848-2 2.9m 3.6kg
A30002 Hastings handguard - non-conductive delrin
CS-45 1.7m 1.1kg
A30002
Hastings CS-90 2.0m CATU 1.2kg
handguard CS-225 2.5m 1.2kg

EARTHING
Earthing Equipment
• Supplied to customer specifications
• Other components & kits available
Earth Set Kit
Part No: TENK921
• 25kA/0.5s, 4 sticks, screw clamps,
• Includes custom designed carry and storage bag TENM447
• 1200ml earth spike
TEST EQUIPMENT
DC Voltmeter
Part No: RCDCAU
The RCDCAU Digital DC Resistive Voltmeter has a single range of 0 – 2kV.
This unit is designed to measure DC voltage.
The unit consists of a meter probe, second probe and connector cable.
The five position selector switch located on the face, controls OFF, ON, and
Test. The OFF positions are for storage and transit. The ON position is for
measurements from 0 to 1999 volts with one volt resolution. The T position tests
basic meter functions and the digital display.
General purpose meter that can be used in a variety of applications:
• A General Purpose 0 to 2kV DC Digital Voltmeter
• Designed to confirm the status of electrical systems
• Can be used with higher currents than hand-held models
• A large digital lcd display has a backlight for easy reading
• Both the meter probe and secondary probe have threaded end fittings
• The unit includes three adapters: a hook adapter and two straight adapters
• An 8 foot interconnecting cable is also included
• Meter is water resistant and has a strong construction
• Designed to withstand wear
• The unit is contained in a highly durable carrying case with interior padding
DETECTORS
V i s u a l & A co u sti c Sofamel’s range of High Voltage Detectors feature new technology that allows
accurate detection from any angle. A red LED light signal and acoustic buzzer
indicates when direct contact has been detected. Direct contact detection
ensures safe indication even in high conflicting electric field environments.
Certified to • Electronic voltage detector by micro controller

IEC 61243 • Self test function - full circuit, not just lights
• Auto power on with voltage presence
• Auto power off after 2 minutes of no voltage presence
• Voltage indicated a visual red LED and 100db@1m acoustic signal
• Acoustic signal exceeds IEC standard to ensure it is heard even
when operated at a distance on a stick
4 3 • Green LED indicates standby mode
• Indoor and outdoor use
• Universal sunrise fitting suits telescopic and sectional sticks
• Supplied in heavy duty metal case with battery included (9V alkaline)
1
2
Electronic Voltage Detector - Medium Voltage
• Orange LED indicates low battery
• Certified to IEC 61243-1:2003 + A1:2009 UNE 61243-1:2003
Part No Model Rated Voltage Frequency
645220 VT-3/10-U 3 - 10 kV 50 Hz
645225 VT-4/12-U 4 - 12 kV 50 Hz
1. Green LED - Standby Mode 645230 VT-10/30-U 10 - 30 kV 50 Hz
2. Red LED - Voltage Presence 645235 VT-11/33-U 11 - 33 kV 50 Hz
3. Orange LED - Low Battery
4. On/Test Button 645240 VT-15/45-U 15 - 45 kV 50 Hz
645245 VT-22/66-U 22 - 66 kV 50 Hz
Heavy duty
protective case Universal sunrise fitting
Electronic Voltage Detector - High Voltage

• Certified to: IEC 61243-1:2003 + Amend 1:2009 and UNE 61243-1
645162 VT-63/150-U 63 - 150 kV 50 Hz
645172 VT-90/225-U 90 - 225 kV 50 Hz
100db@1m
645182 VT-150/420-U 150 - 420 kV 50 Hz
Acoustic signal 645184 VT-45/420-U* 225 - 420 kV 50 Hz
exceeds IEC 645186 VT-225/420-U* 225 - 420 kV 50 Hz
standard to * Out of IEC Standard
ensure it is
heard even
when operated
at a distance on
a stick

DETECTORS
Sofamel DC Voltage Detector with AC
Induced Voltage Indication
Part No: 645215
• DC voltage: 500 V to 5000 V AC induced voltage: 500 V to 6000 V
• Usage frequency: DC: continuous, AC: 50 Hz / 60 Hz
• High luminosity green LED when no voltage or it is below the established
detection threshold
• Orange LED indicates DC voltage presence
• Red LED indicates AC induced voltage presence
• Green LED flashing indicates low battery
• Green LED off indicates battery level is critical
• Fixed acoustic buzzer for DC voltage presence
• Alternated acoustic buzzer for AC induced voltage presence
Electronic Detector • Fixed acoustic buzzer with different frequency when DC voltage and AC
for Catenary Lines induced voltage are present at the same time
• 9V battery
• Extra flexible earthing cable with silicon sheath and 6m long
• Required insulation pole: With universal head (not included)
• Full self-checking system with automatic disconnection after two minutes
WITHOUT DETECTION
• Auto start-up system using detection of voltage (approx. 500 V DC and 1000 V AC)
• Possibility of exchanging electrode
• DC Threshold from 450 V to 1000 V. AC Threshold – From 450 V to 1000 V
LiveTester Proximity Detector

Part No: LT-220-K
• Audible and visual proximity meter
• Patented ferro electric detector
• Electronic touchpad
• Self test function tests internal circuitry and audio visual features
• Auto power off
• Operator feedback - both audible and visual
Static
LT220 Detection Face • Low battery indication
• Water resistant IP 65 and impact resistant
Discriminator
• All models 50Hz
• Universal/shotgun adaptor
• 3 x “C” size batteries required
• Supplied with canvas protective storage/carry bag
TOOL BUCKETS
Canvas Tool Buckets
Part No: TENM206
• Oval shaped tool bucket, red
• 14 internal tool pockets, 9 external tool pockets, 1 large with velcro flap
• Made from durable tear stop canvas and webbing
• Detachable webbing shoulder strap and 2 x s/steel gate hooks
Pockets Dimensions (mm) Weight
14 Internal, 10 External (1 Large) 400 (L) x 240 (W) x 260 (H) 1.3kg
Part No: TENM201

• “Traditional” tool bucket, white
• 2 open, external pockets with bound edges
• Made from durable loomstate canvas and reinforced webbing
• PVC marine grade internal/external base
• Rope handle, fixed one end and s/steel snap hook the other
2 External 300 Ø x 350 (H) 1.0kg
Part No: TENM203

• “Classic” tool bucket, red
• 2 open, external PVC pockets with bound edges
• Made from durable tear stop canvas and PVC
Part No: TENM207

• 2 Rope handles, fixed one end and s/steel snap hook the other
• 2 rope handles make it ideal for hauling, can be hung while detaching
the hauling line
2 ropes for Pockets Dimensions (mm) Weight
easy hauling 2 External 280 Ø x 350 (H) 1.0kg
GLOVE AND SLEEVE BAGS

Glove Bag - Canvas (LV)
Part No: TENM408
• Traditional loomstate canvas glove bag, white
• Tapered shape
• Velcro flaps and s/steel snap hook to clip to belt
• Bound edges
460 (L) x 200 (W) x 100 (D) 0.5kg
Loomstate is an untreated and undyed natural cotton

canvas. It is an ideal material to store vital protective
rubber goods such as gloves, sleeves and inners.


Glove Bag - Canvas 3 Pocket (LV)
Part No: TENM409
• 3 pockets: for rubber insulating gloves, protective outers and cotton inners
• Velcro flap and s/steel snap hook to clip to belt
• Supplied with identification tag (key tag)
• Bound edges
Gloves not Dimensions (mm) Weight
included 360 (L) x 170 (W) x 220 (D) 0.5kg
Glove & Sleeve Bag - 2 Pocket Canvas (HV)

Part No: TENM410
• Tapered shape
• Bound edges
640 (L) x 200 (W) x 200 (D) 0.7kg

Part No: TENM411
• Tapered shape
• 3 pockets - for rubber insulating gloves, sleeves, protective outer and cotton
inner gloves
• Bound edges
Gloves and Sleeves not included 700 (L) x 220 (W) x 360 (D) 1.3kg
Opening loops and Single external FIBREGLASS STICK BAGS

top and side velcro accessories pocket
wide opening with velcro closing Fibreglass Stick Bag, Singular - PVC
Part No: TENM301
• PVC stick bag
• Opening loops + top & side velcro wide opening allow easy access to stick
• Single external accessories pocket with velcro closing
• Reinforced eyelet at top of bags
• Webbing carry handles
• Bound edges
Reinforced eyelet
at top of bags Stick
Colour Suits Stick Codes Weight
Length
8106, HV216 to HV240, MV-25 to MV-40,
Red 1.8m 1.4kg
M-50, SM-30, 81-706
Stick Bag, Sectional Shotgun - PVC

Part No: TENM311
• 8 accessory pockets - Some clear PVC pockets for quick ID of contents
• Labelled pockets for copper and aluminium scratch brushes
• Fold bag in half for ease of carrying
• Reinforced eyelets at top of bag, Webbing carry handles, Bound edges
Tools not • Holds 2 sticks 1 x 1.8m & 1 x 0.6m
included • Weight 1.8kg
EQUIPMENT BAGS
TENM510
strap with 2 s/
Barrel Bag, PVC

Part No: TENM512
• Webbing handles
650 (L) x 380 (Ø) 0.7kg
Barrel Bag, Canvas

Part No: TENM506
• Webbing handles
TENM506 800 (L) x 380 (Ø) 1.0kg

Part No: TENM402
180 (L) x 70 (W) x 300 (H) 0.2kg

EQUIPMENT BAGS
Equipment Bag - PVC
Part No: TENM511
460 (L) x 290 (H) x 130 (W) 1.0kg
Equipment Bag - PVC

Part No: TENM407
your general test
Earth Bag - PVC

Part No: TENM424
• Velcro flap
• 1 divider
600 (L) x 160 (W) x 600 (H) 1 0.8kg

Cable Strippers
Depth Cut Depth
the energy network
SIGNALLING
SIGNALLING the energy network
HYDRAULIC PULLERS
• Ready for immediate use on site
• Quickly mobilised and placed in working position
• Full training & Risk Assessment provided
• Used for overhead stringing and underground cable hauling
• Single rope stringing
• Negative self acting hydraulic brake
• Bull wheels made of wear proof thermally and chemically treated steel
• Hydraulic dynamometer with set point & automatic control of maximum pull
Overhead &
• Built in reel winder with automatic level wind and special reel for 500m of
8mm Ø Rope
Underground
• Closed hydraulic circuit for stepless speed variation in both rotating directions
• Cable guide pivot pulley suitable for work in any underground situation
• 12VDC electrical system
Max speed at pull 0.7km/hr Skid
Max speed 3.6km/hr 8mm Dyneema Braided Rope
Pull at max speed 4kN Swivel Guide Rope Roller - ALL111
Engine Output 13kW
Bull wheel Ø 200mm
Rope Ø 8mm
ALL111 Optional Extra
Underground Cable Pivot Guide Weight (No fluids) 500kg
the energy network SIGNALLING
HYDRAULIC PULLERS
The ARS403 Hydraulic Puller is suitable to string one rope. The bull wheel
grooves are made of wear proof thermally treated steel.
• Used for overhead and underground pulling
• Negative self-acting hydraulic brake
• Hydraulic dynamometer with set-point and automatic control of max. pull
• Hydraulic oil cooling system
• Control instruments for hydraulic system and diesel engine
• Rigid axle for towing at max speed of 30km/hr
• Built-in reel winder with automatic level wind, suitable for standard reel
BOF010 and BOF020 (AXR001 included)
Site Trailer • Electronic pull and speed recorder kit (instrument not included)
• Pull pre-setting system
• Mechanical front stabiliser
• Grounding connection point
Hydraulic Transmission
Closed hydraulic circuit for stepless speed variation in both rotating directions.
Max speed at pull 1.2km/hr Mine Spec Road Trailer
Max speed 3.6km/hr Site Trailer
Pull at max speed 12kN Pull Recorder - DLR300
Engine Output 25kW U’grd Cable Pulling Attachment - ALL110
Bull wheel Ø 325mm Swivel Guide Rope Roller - ALL111
Rope Ø 13mm Extra Shaft - AXR001
Weight (No fluids) 980kg
Standard Road Trailer Underground Swivel
(Optional)
Optional
Road
Operator protection with
cage mount and side rails
Trailers
In-built
dynamometer
Anti-twist braided
galvanised wire
(High strength synthetic
ALL111 Swivel guide rope available)
rope roller SOLD SEPARATELY
Provision for connection

to pull recorder
Electric brakes
DLR300 Electronic pull standard Toolbox complete
and speed recorder Robust galvanised with wheel chocks
tandem trailer and spill kit
Added safety requirements to meet mine specifications

Mine Spec
Road Trailer

CAPSTAN WINCH & ELECTRIC CABLE PULLER

Power Pack with Foot Switch
Part No: 08610900AU
Floor/Pole Mount Bracket
Versatile!
Part No: 08674005
The STD Cable Puller offers portability and ease of set-up in a completely self-
contained unit to adapt to a variety of pulling situations. It comes equipped with
a three-speed removable power pack, providing up to 28.9kN of pulling force
Configures at low speed. Speed changes occur with just the turn of a dial.
to a variety Design features include a self-tailing capstan for added stability, a pivoting arm
and a foot switch for operator convenience and safety. It accepts all diameter
of power, rope (self-tailing capstan accepts 16mm to 22 mm rope only).
fibre optic
08674857 CableGlider® Kit includes:
and other • Puller
cable pulling • Floor Mount
situations • External Frame Kit
• Split Fork Adapter
• Conduit Adapters: 51mm (2”), 76mm (3”), 89mm (3½”), 102mm (4”),
127mm (5”), 152mm (6”) Split Conduit Adapters
• 365m x 16mm double braided rope
• Accessories tool box
Low/Low Low/High High/High

PULLING FORCE
Standard Kit [08674857] Speed Speed Speed
Maximum 28.9kN 15.6kN 4.4kN
Continuous 17.8kN 8.9kN 1.1kN
PULLING SPEED
No Load 5.3m/min 12m/min 23.5m/min
At 8.9 kN 4.1m/min 5.7m/min —
At 17.8 kN 2.9m/min — —
At 26.7 kN 2.1m/min — —
Power Requirements
Power Supply 230 VAC @ 5 Amps Min
PEAK POWER 4.7 HP (3.5kW)
GENERATOR 4000 Watt Recommended
Capstan Self tailing, 14cm diameter, 11.2cm width
Weight Tool Weight 102kg / Packed Weight 120kg
Dimensions 147cm L x 69cm W / Max Reach 2m
Floor/Pole Mount Conduit

Part No Powerpack Rope
Bracket Adaptors
08674005 No No Yes No
08610900AU Standard No No No
08678025 Standard No No Yes
Cable Glider with Conduit 08674857 Standard Yes Yes Yes
Adaptors [08678025]
DRUM WINCHES & BRAKES
WirePilot 3T Disc Brake (Fail Safe) Drum Skid
Part No: WPSDB-1S
The WirePilot WPSDB-1S is a standalone single drum stand with fail safe
brake capabilities. The hydraulic fail safe brake system is constantly engaged,
requiring the operator to use the hand pump to increase the systems hydraulic
pressure in order to disengage the brake.
This system is designed to provide and allow safe braking for a single drum. The
braking force and thus winching speed is manually controlled by the operator
through hydraulic valve adjustment.
The WPSDB-1S is a standalone system made up of 1 x Cable Drum Platform.
BRAKING
• 1. The ability to adjust the brake force required
• 2. The ability to allow the Drum to free-wheel
• 3. The ability to control the pump manually/hydraulically
• 4. Automatic Fail-safe Braking
OPERATIONAL SPECIFICATIONS
• Drum Stand Size - 1650 x 1170 x 1300mm
• Drum Stand Weight - 1250kg
• Drum Stand Mounting - 4x Container Locks,1450 x 1000mm Centres
• Max. Drum Weight - 3000kg
• Max. Drum Diameter - 1300mm
• Max. Drum Width - 975mm
• Brake Tension Resistance @ 1m Drum Diameter - 750kg
WirePilot 3T Winch (Fail Safe) & Brake Skid

Part No: WPSDBS-1S
A single drum cable drum Winch and Brake stand employed for the
reconductoring or new conductoring of overhead and underground cable by
either hydraulic winching, hydrostatic braking or friction braking of 1 conductor
under tension from a cable drum.
• Capable of a winching force of 1500kg @ 1m Diameter @ 10rpm and
lighter cable tensions up to 75rpm
• Drum may be operated to high torque low speed or low torque high speed
• Various Models Available via a high / low range switch
• Model Shown Includes Optional Extras • Winch drive can also be operated as a braking unit via a toggle switch
enabling 1500kg @ 1m braking force up to 60rpm
• Drum frame is also fitted with a friction braking system capable of applying
a cable resistance tension of 400kg at 1m drum diameter and can be used
when the power pack is not connected or running
• Braking system is fail safe and must be activated to release the brake
• The winching and braking force can be controlled by the operator from zero
to full tension
• Drum skid and power pack capable of being mounted to a container sized
flat bed truck or trailer
• Foot print physical size is a maximum of: 1600mm Long x 1600mm Wide x
1650mm High with a 1300mm diameter drum installed
• Main structural components are hot dip galvanised, all other components
are powder coated
• Operator has full control of winching and braking operations from the
manual controls with the option of an electrical corded controller
• Operator has control to operate via hydraulic hand pump to brake the drum
when the power pack is not running
• Formal risk assessment training according to AS 31000 - 2009
Full control of winching and
braking operations from
manual controls with option of
electrical corded controller
REELS
• Reels are made of welded steel with a protective coating
• Each reel is provided with two cross supports and connecting bolts
Standard Reels (Fixed)
Part No: BOF
Dimensions (mm)
Part No Weight
A B C D
BOF010 420 560 570 1100 53kg
BOF020 420 560 570 1400 73kg
BOF030 420 560 570 1900 135kg
BOF330 420 1560 1010 2200 1000kg
Detachable Reels
Part No: BOC
• A detachable side and the conical drum facilitate removal of rope or
conductor coil
Dimensions (mm)
Part No Weight
A B C D
BOC040 420 560 590 1100 72kg
BOC050 420 560 590 1400 86kg
BOC310 420 890 626 1900 210kg
BOC320 420 1310 605 2050 250kg
Galvanised Steel Rope

Part No: FUX
Anti-twist braided galvanised steel rope, made of braiding strands.
• High flexibility
• Complete stability to rotation
• Strands with individual galavanised elementary wires
Supplied Indicative
Nominal with Lubricated Breaking Standard
Part No
Diameter Spliced Mass Load Length**
Eyes Rope*
FUX006 6mm ALF001 0.11kg/m 22kN 1800-3600m
FUX008 8mm ALF001 0.22kg/m 42kN 1600m
FUX010 10mm ALF001 0.35kg/m 68kN 1200m
FUX013 13mm ALF002 0.55kg/m 105kN 800-1600m
FUX016 16mm ALF002 0.84kg/m 160kN 900m
FUX018 18mm ALF002 1.21kg/m 225kN 800m
FUX020 20mm ALF003 1.24kg/m 265kN 1000m
FUX022 22mm ALF003 1.52kg/m 320kN 900m
FUX024 24mm ALF003 1.76kg/m 375kN 800m
FUX026 26mm ALF003 1.98kg/m 409kN 700m
FUX028 28mm ALF003 2.33kg/m 479kN 600m
*Due to production variations, linear mass may change
** Rope is available in longer continuous sections, without connectoirs, up to 7,000m
ROPE
Telecommunications & Fibre Optic Rope
• 6mm in diameter with 2 Blue and 1 Yellow strand
• Tangle free uncoiling to coil end, no waste
Break
Part No OD Length Colour
Force
ROS0614 6mm 400m
Blue/Yellow 602kg
ROS0652 6mm 500m
Titan Braid Rope

• Manufactured with a braided polyester cover over a braided nylon core
• Ideal for use as winch or /and tow lines and for setting underground cable
• High strength • Winch lines
• High UV resistance • Tow lines
• Splicable • Rigging lines
• Flexible • Pulling and stringing line
More sizes
Part No OD Length Average Tensile
available 26127-100 12.7mm 100m 4,300kg
Contact TEN 26143-365 14.3mm 365m 6,400kg
26191-365 19.1mm 365m 10,500kg
26222-365 22.2mm 365m 13,200kg
26222-500 22.2mm 500m 13,200kg
An excellent alternative SupreemX-12 - Dyneema Fibre Braided Rope

to wire rope • Manufactured with Dyneema® fibre and coated with polyurethane
• 12 strand braided rope
• Polyurethane coating adds additional abrasion resistance for longer life
• Extremely high strength • Winch lines
• Light weight • Tow lines
• Abrasion resistant • Alternate to wire rope
• Low stretch • Rigging lines
• Neutral buoyancy • Utility line
• Splicable
• Flexible
Part No OD mm Average Tensile
02064-* 6.4mm 3,950kg
02079-* 7.9mm 6,000kg
12.7mm SupreemX loaded on a
TESMEC 35kN Winch 02095-* 9.5mm 8,400kg
02111-* 11.1mm 10,600kg
02127-* 12.7mm 15,360kg
02143-* 14.3mm 18,700kg
02159-* 15.9mm 23,800kg
-* Specify length in metres
More sizes
Super available
Contact TEN
Strength

LEWIS CABLE SOCKS

Underground Cable Socks
• Coated galvanised cable, reverse weave, and a single wire bail but will not
have metal shoulders
• Identified by tags beneath the heavy duty clear tubing
Part No. Range UTS Length
TCS-UG06 6-13mm 8.18kN 304mm
TCS-UG13 13-19mm 9.09kN 355mm
TCS-UG19 19-32mm 26.6kN 610mm
TCS-UG31 32-51mm 33.3kN 810mm
TCS-UG50 51-70mm 60kN 965mm
TCS-UG69 70-89mm 73kN 1165mm
TCS-UG88 89-108mm 86.7kN 1320mm
TCS-UG108 108-124mm 93.4kN 1470mm
TCS-UG124 124-140mm 110kN 1625mm
TCS-UG140 140-153mm 110kN 1625mm
TCS-UG152 153-171mm 110kN 1625mm
TCS-UG171 171-203mm 110kN 1625mm
Overhead Single Soft Eye Cable Socks

• Powerful socks for pulling big conductor smoothly through pulleys
• Made of high quality flexible aircraft strand steel, integrated with a
flexible eye
• Eye is composed of braided strands (rather than being rigid) to give
maximum flexibility going around angle pulls or through small openings
• Sock strands are retained at the head by a stainless steel spring, eliminating
rigid compression sleeve
Approx.
Work Load
Part No. Range Break Mesh Eye
3:1
Strength
TCS-OH05 5mm- 12mm 5.45kN 16.8kN 558mm 101mm
Standard Swivels
• Swivels for connecting pulling rope to cable sock
• For Overhead or Underground application
• Made from high tensile galvanised and corrosion protected steel
• Chamfered edges allowing smooth passing through rollers or conduit
• Special design can bear high radial loads. Thrust bearings designed to
avoid torsion strain accumulation
Max
Diameter Overall
Part No Rope Size Break Load Weight
OD Length
OD
GGT001 10mm 70kN 28mm 106mm 0.3kg
GGT010 13mm 110kN 40mm 143mm 0.9kg
GGT020 18mm 220kN 54mm 184mm 2.1kg
GGT030 24mm 360kN 60mm 234mm 3.4kg
GGT040 28mm 750kN 77mm 322mm 8.2kg
CABLE LUBRICANT
Polywater
American
Corporation Polywater Lubricant J

• High performance cable lubricant for heavy cable installations
• Maximum Friction Reduction
• High Cling Factor
• *Compatible with all common Australian cables
• Temperature Stable
• Non-Combustible Residue
• Specification Grade “J”- The lubricant contain no waxes,
greases, silicones, or polyalkylene glycol oils
• Application System available in ‘Front End Packs’
• Complete cleanup is possible with water
Part No Description
J-640 18.9L Drum
J-110 76mm diameter x 36mm long -
J-35 950ml J-110 1.9L Front End Pack used in 89mm and larger conduit
Squeeze Bottle J-99 950ml Front End Pack J-99 44mm diameter x 60mm long -
Polywater Lubricant J J-640 18.9L J-35 950ml Squeeze Bottle used in 50mm and 76mm conduit
Polywater® Front End Front End Pack™

is a conduit-sized polyethylene
Packs lubricate ahead of bag of lubricant. The Front
the cable during the pull End Pack™ travels through
the conduit on the winch line
prelubricating the conduit
ahead of the cable being
pulled.
ALSO AVAILABLE:
A program for cable pulling
tension calculation and conduit
system design
Pull-Planner™ 3000 for Windows™

Pull-Planner™ 3000 for Windows™ calculates cable pulling tension and
sidewall pressure around bends using the pulling equations. Tension
estimates are useful in designing conduit systems and planning cable pulls.
Such planning can save time and money by minimising splices, vaults, pulling
Consult your set-ups, etc., while ensuring installation tensions that won't damage cable.
TEN Group Sales Pull-Planner™ 3000 for Windows™ approaches a pull in "segments." Each
segment normally consists of a straight section followed by a bend.
Representative
on Polywater
lubricants and
the Pull-Planner
software for
your cable pulls.

DRUM JACKS
Drum Jacks
• Collapsible design for easy transport and storage
• Significant reduced pinch point
• Reinforced retaining cup for threaded spindle
• Jacks labeled with ratings
• Easy wind up design with handle
• Galvanised finish
Spindle Max Drum Max Drum Weight
Drum Jack WLL
OD Diameter Width per Set
34mm
TENW002 42mm 1280mm 1030mm 1000kg 60kg
60mm
60mm
TENW003 1800mm 1180mm 2000kg 90kg
76mm
60mm
TENW004 2400mm 1180mm 3000kg 165kg
76mm

Cable Strippers
Depth Cut Depth
Sheath Strippers
Spare Blade
Part No Suits Cable Features Wt
Part No.
Circular and longitudinal
cutting, auto-tensioning stirrup
AM1 4.5 - 25mm Ø with cutting depth thumbscrew AM1-B 0.1kg
adjuster, replacement blades
inside handle. 135mm long
cutting, auto-tensioning stirrup
AM2 25 - 36mm Ø with cutting depth thumbscrew AM2-B 0.1kg
adjuster, replacement blades
inside handle. 140mm long
cutting, adjustable cutting
R3840 8 - 28mm Ø depth by thumbwheel, - 0.1kg
replacement blade in handle.
130mm long
TOOL BUCKETS
Canvas Tool Buckets
Part No: TENM206
Part No: TENM201

Part No: TENM203

Part No: TENM207

the hauling line

Part No: TENM408
• Tapered shape
• Bound edges
460 (L) x 200 (W) x 100 (D) 0.5kg



Part No: TENM409
• Bound edges

Part No: TENM410
• Tapered shape
• Bound edges
640 (L) x 200 (W) x 200 (D) 0.7kg

Part No: TENM411
• Tapered shape
inner gloves
• Bound edges

Part No: TENM301
• PVC stick bag
• Bound edges
Reinforced eyelet
Length
8106, HV216 to HV240, MV-25 to MV-40,
Red 1.8m 1.4kg
M-50, SM-30, 81-706

Part No: TENM311
EQUIPMENT BAGS
TENM510
strap with 2 s/
Barrel Bag, PVC

Part No: TENM512
• Webbing handles
650 (L) x 380 (Ø) 0.7kg
Barrel Bag, Canvas

Part No: TENM506
• Webbing handles
TENM506 800 (L) x 380 (Ø) 1.0kg

Part No: TENM402
180 (L) x 70 (W) x 300 (H) 0.2kg

EQUIPMENT BAGS
Equipment Bag - PVC
Part No: TENM511
460 (L) x 290 (H) x 130 (W) 1.0kg
Equipment Bag - PVC

Part No: TENM407
your general test
Earth Bag - PVC

Part No: TENM424
• Velcro flap
• 1 divider
600 (L) x 160 (W) x 600 (H) 1 0.8kg
Service & Repair
Energy utilities and contractors make large
investments in tools and equipment that
can cost millions of dollars each year.
Good servicing routine and processes

extend the life of tools, minimising
unplanned downtime and reducing tool
lifetime costs. Planned maintenance for the energy network
regular servicing of your tooling also helps
reduce repair costs, and improves reliability
and productivity.
SERVICING
Servicing tools and equipment extends the
useable life of the tool by replacing worn
components before a failure or fault occurs.
Replacing a low cost seal on a hydraulic Hydraulic Battery Tools
tool could be the difference between getting Line Hydraulics
a job done and costly delays. Repairing a
Stringing Machinery
damaged tool is almost always more costly s
than undertaking the regular maintenance Cable, Strap & Chain Hoist
and service of the tool.
QLD - BANYce O
65 Wentworth Pla
07 3212 8999
VIC - DANDENONG STH
24 Deans Court
03 9793 1622
WA - CANNING VALE
4/15 Baile Rd
08 9455 5574
MAINTENANCE www.tengroup.com.au
A regular maintenance schedule allows the sales@tengroup.com.au
utility to plan downtime instead of being forced
into unplanned downtime when a tool fails.
Service work can be carried out at a time when
the tool is not required or there are additional
tools available for use. TEN offers loan tools
where available and this can all but eliminate
any downtime for a depot or truck with only one
tool.
When it comes to Maintenance, Servicing and TEN’s workshops in QLD, WA & VIC offer repair, servicing
repair requirements for hydraulic tools and and refurbishment capabilities across the country, manned
equipment you really need to be able to trust by staff with extensive tool and equipment knowledge.
that your work is being carried out properly. Our These workshops stock many spare parts so that tool and
qualified staff take the guess work out of untimely equipment maintenance, service and repair time is minimal,
delays due of maintenance issues. providing an efficient service to our customers.

HYDRAULIC TOOLS
Part No: ES-20-LAU
Cuts ACSR, Al, Cu, Steel Rope
ll ig e nt t o o ls t h a t Cutting Force 23kN/ 2.3 Tonne
Inte ti v it y
inc r e a s e p r o d u c Tool Weight 2.0kg including battery

Part No: ES-32LAU
Cuts Al, Cu

Part No: ESG-25-LAU
• High-performance cutting for highly-flexible conductors and wire cables
• Closed head, flip top style, rotatable 330°
Cuts ACSR, Al, Cu, Steel
Cutting Force 60kN/ 6 Tonne
HYDRAULIC TOOLS
Battery Powered Cutting Tools 6T & 12T
• Closed cutting head with bolt interlock, flip top style, under no pressure
rotates 360°
ESG-45-LAU • Quick motor stop for high user safety
• Manual retraction stop (MRS) for efficient operations
Part
ESG-45-LAU ESG-85-LAU ESG-105-LAU
Number
ACSR, Al, Cu,
Cuts Armoured, Round Al, Cu, Light Armoured Al/ Cu
ESG-85-LAU Steel 20mmOD
Cutting
>45mmOD >85mmOD >105mmOD
Scissor Style Range
Cutting Heads Cutting

Force
60kN/ 6 Tonne 60kN/ 6 Tonne 120kN/ 12 Tonne
available on Tool 5.7kg including 6.6kg including 10.3kg including
ES-85-LAU
all models Weight battery battery battery

One head for
crimping, cuttin-g
and punching
one tool for all

• Ergonomic 2-component housing in Klauke “In-line design”
multiple crimpings
Cutting Range 40mm

HYDRAULIC TOOLS
Part No: EK-12042-LAU
• C-Head with 42mm opening width and wide crimping range to 400mm²
• Up to 60% less crimping operations compared with 6 Tonne tools
• Easy handling by optimum weight distribution
• Integrated pressure measurement with visual and audible signals in case of
failure
• Evaluation function using optical interface and USB-Adapter
• High-performance motor for maximum operating speed
No.1 Seller
• Automatic retraction stop (ARS) for positioning control in case of multiple
crimpings
Crimps Cu 400mm, Al 240mm, ACSR 185mm
Klauke Crimping & Cutting Tools Crimping Force 120kN / 12 Tonne
USB Adaptor - Part No: PGA1 Stroke/Opening Width 42mm
Allows downlo ads of Head Rotation 360°

tool crimping data Tool Weight 6.8kg including battery

Part No: EK-425-LAU
• One handed ergonomic design with single push button operation
Ideal
• Suitable for ABC (3 ABC Dies Included) and up to 240mm2 Cu/Al
Head Rotates 360° • Automatic retraction once crimp is completed
for ABC
• Integrated pressure test with optical and acoustical signal in case of failure
• Autostop function
• LED Light Illuminates working space
• Red LED display and acoustic signal in case of fault
Red LED • High performance 18V Lithium-Ion-battery - Charges in 22 Mins
Ergonomic single display and
push button acoustic signal • Crimp head rotates 360°
operation in case of fault • Multi-functional LED indicates maintenance and battery control
• Manual retraction does not rely on battery power
• Includes 2 x Crimp Head (CJD3BG & CJ22), 3 x ABC Dies, 1 x Cutting Die,
18V/3.0Ah Li-Ion Battery, Charger & Heavy Duty Plastic Case
LED Illumination of
workspace 50kN force in a lightweight tool of only 2.6kg
Genuine Makita Crimps Cu/Al 240mm2, ACSR 185mm2
Li-Ion Battery Crimping Force 50kN / 5 Ton
Stroke/Opening Width 40mm
Head Rotation 360°
Crimp Styles
Die Type CJD3BG CJ22

HYDRAULIC TOOLS
Part No: AHP700LC
+ • Compact and lightweight design for mobile field application
• Suitable for operating single acting crimping and cutting tools of 700 bar
-
• Selector switch for crimping, cutting and punching operations
• Fibreglass reinforced polyamide shock proof housing
• Large display indicates function selection, pressure readings, battery
condition and diagnosis information
• Automatic retraction
• Remote control with cable for easy operation
• All high pressure hoses are supplied with coupling plug and coupling sleeve,
filled with oil
6.4kg with • Two powerful Makita 3.0Ah,18V Li-Ion batteries
2 batteries • Cushioned shoulder strap for optimum wearing comfort
s
1 Pump - Multiple Head
100T
7.7kg Crimping
3.5kg
105mm Armoured Cutting Head Head
Part No SDG105C Part No Multi Head
PK1000C Crimping/Cutting/Punching
33kg with dies Part No PK120UNVC
4.3kg 40mm
85mm Armoured Cutting Head Cutting Die
Part No SDG852C Part No
25T UCACSR
Crimping
Head 12T Die
3.8kg
Part No Adaptor
45mm Armoured Cutting Head PK252C Part No
Part No SDG45C 5.3kg UA12T
Punch
Adaptor
12T Part No
5.2kg UA12P
Crimping
85mm Cutting Head ACSR/ Steel
Head
Highly
Part No SDK85C
Part No
PK12042FPC
4.5kg
Versatile
2kg
Cutting Head
Part No SDK20P33MC
Drive unit with Drive unit with

press head cutting head

HYDRAULIC TOOLS
Remote Hydraulic Cutting Heads
• For specialist cutting requirements in the vicinity of live power lines in the
electrical utility and railway industries
• SD cutting heads that allow the operator to remotely cut conductor and
tree limbs
ACSR Cutting Head

Part No: SDK20
• Lightweight head for cutting ACSR conductor or steel
dropper wires (railway), up to 20mm diameter
Cu/Al Cutting Head

SDK20 SDA50 SDK32 Part No: SDK32
• Lightweight head for cutting copper or aluminium conductor
up to 32mm diameter
Wood Cutting Head

Part No: SDA50
• A unique lightweight hydraulic head for cutting tree branches
• Reduces the manual exertion required when using mechanical pruners and
branch saws
• Greatly reduces the amount of exposed metal when cutting in close
proximity to live overhead conductors
• Cuts tree limbs up to 50mm diameter
The Klauke Hydraulic Drive unit

suits all cutting heads above
Drive unit with

cutting head

Part No: AHP700LC
POWER SYSTEMS
& OVERHEAD
TRACTION
the energy network

POWER SYSTEMS the energy network
INSULATING GLOVES
Linesman Gloves LV ASTM CLASS 0 & 00
• Insulating gloves for live electrical work
• Supplied in pairs only
• Single and dual colour gloves available for Class 0
• High dielectric strength, flexible and durable
• Straight style smooth finish gloves
• Sizes 7 - 12, including half sizes on 8, 9 & 10
• Natural rubber
• Meets ANSI/ASTM D120
Class 00 Class 0
TEN can provide a fitting service for
your linesmen’s gloves and sleeves
Linesman Gloves HV ASTM CLASS 1-4
• Meet ASTM D120 and IEC/EN 60903 standards
• All ASTM voltage classes available
• Dual coloured gloves, internal/external for easy inspection
• Straight Cuff (Bell Cuff and Contour Cuff also available)
• Sizes 7 - 12*, including half sizes 8, 9 & 10
(*Excluding Size 7 on Class 3 & 4 and Bell Cuff Gloves)
• Natural rubber
• Meets ANSI/ASTM D120
ASTM
Working ASTM Glove
Part No Sizes Length Label
Voltage Class Colour
Colour
Class 2 Class 4
E0011R-* 500VAC 00 7-12 Red 11”/280mm Beige
Class 3 E014R-* 1000VAC 0 7-12 Red 14”/350mm Red
E014BY-* 1000VAC 0 7-12 Black/Yellow 14”/350mm Red
Straight, Bell E114YB-* 7.5kV 1 7-12 Yellow/Black 14”/350mm White
and Contour *Specify Size - Example:
Cuff Styles E114YB-10: E1 - Class, 14 - Length in inches, YB - Colours yellow/black, Size 10
available
Bell Cuff Contour Straight
Cuff Cuff
FIBREGLASS STICKS & ACCESSORIES

Sectional Stick Kits - Example
Part No: QR-112-4-KIT
Part No Description Qty
5546-4 Extension Section 5
5553-4 Base Section with Glued Rubber Base Cap 1
AD03 Adaptor Bayonet Aluminium Head 1
TENM312 Bag - Sectional Stick Kit 1
10-188-1 Silicone Wipe 2
10-090 Silicone Cloth 1
the energy network OVERHEAD TRACTION
Triangular Operating & Measuring Telescopic
Sticks with Storage Bag
Part No: MV Series & HV Series
• Open and close switches, EDO’s and service fuses
• Replaceable sections, no disassembly tools required
Scratch Proof
• Fluoro lime green tip section is foam filled
• Tested to ASTM F711 & OSHA
Markings
• Kit with Universal Disconnect Hook # P10431 and Storage Bag
MV Series Only:
o Measure elevated heights
o Supplied in metre/centimetre measuring graduations
o Eye level reading feature with measurement markings in lge, red numbers
o Markings will not chip, peel or rub off
Extended Retracted Base Bag
Part No Weight
Storage Bag Length Length Diameter Replacement
TENM301
MV-25-K 7.8m 1.6m 48.5mm 3.7kg
Triangular
Profile MV-30-K 9.2m 1.7m 52.6mm 4.6kg
TENM301
MV-35-K 10.6m 1.7m 56.4mm 5.5kg
MV-40-K 12.0m 1.8m 60.5mm 6.5kg
HV-208-K 2.4m 0.7m 44.5mm TENM308 1.4kg
HV-212-K 3.8m 1.5m 36.8mm TENM309 1.7kg
HV-216-K 5.0m 1.5m 40.9mm TENM301 2.3kg
HV-220-K 6.4m 1.6m 44.5mm TENM301 2.9kg
TENM308 TENM309
Replacement Parts
• No tools are required for replacing, sections sold complete with lock assembly
• Order base cap separately if replacing base section
Fixed & Telescopic Shotgun Sticks

• Full open side hook offers unobstructed view
• Precision cast slide gives complete control and extra firm grip
• Hook release trigger shielded to avoid accidental operation
• Hanger hook moulded into head
• Foam filled fibreglass main shaft
• Tested to ASTM F711 & OSHA Other Sizes
• Fixed shotguns tested to IEC 60855 Available
Part No Style Extended/OAL¹ Bag Weight
Round 8104 Fixed 1370mm TENM309 0.31kg
Profile
8106 Fixed 1980mm TENM301 0.45kg
8108 Fixed 2590mm TENM310 0.59kg
81611 Telescopic 3350mm TENM301 0.54kg
81811 Telescopic 3810mm TENM310 0.59kg
1- Lengths which can be locked for operating
Triangular
Profile
•Meter Reading Telescopic Stick
•Asset Inspection Part No: EX2-1848
• ‘No Twist’ triangular design - enables each section to ‘lock in automatically’
•Fits in a car boot! • Stick collapses below the lip of EWP bucket (940mm)
Triangular
• Sections can be easily removed as required
• All sections easily replaceable - no tools required
Profile • Fluoro green tip section is highly visible and has a foam core
• Ergonomic design gives operator better gripping surface for better control
= NO TWIST Extended Length

4.4m (14.5’)
Retracted Length
0.94m
Tool Weight
3kg

TELESCOPIC STICKS
Sectional Shotgun Sticks
• Same features as Fixed shotguns
• Select Base & Head then required Extension sections for height
Part No Section Extended/OAL (mm)

81-706 Base & Head 2133 (1828 & 304)
81-604 Extension 1219
81-606 Extension 1828

Tree Trimming Kits
Part No: 4141 & 4142
• For line clearance crews, trouble shooting and emergency call outs
• Complete kit with sticks, rope insulator, cutter, saw & adaptors in carry bag
• Tested to ASTM F711, IEC 60855 & OSHA
• Refer to local network provider procedures for live line use
Part Length of Maximum
Stick OD Description Weight
No Sections Height
4141 32mm 1.2m 4.8m Tree Trimming Kit 6.8kg
4142 32mm 1.8m 7.2m (Refer below table) 8.6kg
Qty in Kits
Part No Item Description
4141 4142
4 - 546-4 Stick Sectional Extension 1.2m
- 4 546-6 Stick Sectional Extension 1.8m
TENM315
1 1 4125 Cutter Tree Pruner 600mm FG
1 1 A18007 Base Cap 32mm Female
1 1 A10012 Adaptor Male Universal 32mm
1 1 4010 Insulator Link for Rope 1100mm FG
1 1 P10046 Universal "S" Hook
1 1 A11000 Universal Pruning Saw
1 1 A10016 Universal Saw Handle
TENM305
1 1 A30007 Pruning Saw Scabbard
1 - TENM305 Bag Tree Trim to suit 1.2m
- 1 TENM315 Bag Tree Trim to suit 1.8m
Tree Trimming Accessories

Part No Description Details
Teflon coated, curved blade
A11000 Universal Pruning Saw
400mm, 7 teeth per 25mm
For safe storage of Pruning Saw,
A30007 Pruning Saw Leather Scabbard
Heavy duty stitching
Make your Sectional Sticks
Round
Profile
own kit • Sectional sticks
• Foam filled tested per OSHA, ASTM F711
• 32mm OD sticks tested to IEC 60855
Universal Head with Removable Base Section with Glued

Extension Section
Base Adaptor Rubber Base Cap
OD OD OD OD OD OD
Wt Wt Wt Wt Wt Wt
Length (mm) (mm) Length (mm) (mm) Length (mm) (mm)
(kg) (kg) (kg) (kg) (kg) (kg)
32 38 32 38 32 38
0.6m 5467-2 0.47 - - 0.6m 546-2 0.45 - - 0.6m - - - -
1.2m 5467-4 0.90 5547-4 1.08 1.2m 546-4 0.56 5546-4 0.90 1.2m 552-4 0.68 5553-4 0.85
1.8m 5467-6 1.07 5547-6 1.56 1.8m 546-6 0.93 5546-6 1.39 1.8m 552-6 0.90 5553-6 1.25
2.4m 5467-8 1.41 5547-8 2.04 2.4m 546-8 1.13 5546-8 1.87 2.4m 552-8 1.30 5553-8 1.64
Sectional Stick Kits

• Customised stick kits made to customer specification
• Below are TEN’s standard kits
Individual Kit Part No
Component Item Description
Part No TENK020 TENK021 TENK026
546-4 Stick Sectional Extension 1.2m, 32mm OD 3 - 4
546-6 Stick Sectional Extension 1.8m, 32mm OD - 3 -
Stick Sectional, Universal Head,
5467-4 1 - -
Removable Base Cap, 32mm OD
A5455-10-PTU Fuse Extraction Head - 1 1
A10012 Adaptor Male Universal Head 32mm - 1 1
A18007 Base Cap 32mm Female - 1 1
A30002 Hand Guard to Suit 32mm 1 1 1
P10431 Universal Disconnect Hook - 1 1
A10400 Universal Disconnect Hook Fluoro 1 - -
TENM302 Bag Sectional Kit, 4 x 1.2m & Acc Pock 1 - 1
TENM306 Bag Sectional Kit, 4 x 1.8m & Acc Pock - 1 -
10-188-1 Disposable Silicon Cleaning Wipe 2 - 2
10-090 Silicon Wiping Cloth 1 - 1
A5455-10-PTU
Fuse Extraction
P10431
Disconnect A10400
Hook Disconnect Adaptors & Base Caps
Hook, Fluro
• Universal head, sectional button type adaptors and base caps
• Suits button extension fibreglass sticks
Image
Part No A10012 A10025 A10011 A10026 A18007 A18008

Suits Sticks 32mmOD 38mmOD 32mmOD 38mmOD 32mmOD mmOD38
Description Male Universal Button Adaptor Female Universal Adaptor Female Base Cap
Material FG, Al Alloy & Plastic FG & Rubber

HYDRAULIC TOOLS
60, 100 & 200 Tonne Hydraulic Press Pumps
POWERCOM SA presses have been designed to compress joints on
conductors and steel cables during stringing operations.
• Easy to operate and low weight
• Made of high tensile alloy steel, hot forged and suitable for compression
of joints on conductor and steel ropes for electric lines (medium and high
voltage)
• Excellent weight /power ratio
• Easy to operate on suspension working platforms and steel towers
• Fitted with motorized or hand pump, control valve, pressure gauge and
IRP200
quick release couplings
• Comply with European safety standards (CE)
Part No IRP60 IRP100 IRP200
Max Force 600kN/60 Tons 100kN/100 Tons 2000kN/200 Tons
Max Pressure 700 bar 700 bar 700 bar
Weight to Power Ratio 2 Ton : 5kg 3 Ton : 1kg 2 Ton : 1kg
Die Weight 1kg 1.5kg 6kg
Max. Hexagon 44mm 57mm 92mm
Max. Stroke 18mm 26mm 32.5mm
Case Dimensions 450mmW x 310mmD x 350mmH 500mmW x 700mmD x 620mmH 500mmW x 700mmD x 750mmH
Tool Weight 24kg 32kg 109kg
IRP100 IRP60
Motorised Hydraulic Pumps

Motorised hydraulic pumps, equipped with quick release couplings and
protection frames. Suitable for Presses IRP60, IRP100 and IRP200.
Petrol
Petrol Engine
CMS14012 Part No: CMS14012
• Four-stroke petrol engine 5 HP
• Flow 1.3 L/min
• Max. Oil Pressure 700 bar
• Oil Tank Capacity 12 L
• Weight 45kg
• Case 500 x 700 x 750mm
Electric Motor
Part No: CME16083
• Three-phase engine 220/380 V - 2.2kW
Electric • Or Mono phase 220 V
CME16083 • Flow 1.3 L/min
• Max. Oil Pressure 700 bar
• Oil Tank Capacity 12 L
• Weight 44kg
• Case 500 x 700 x 750mm
INSPECTION EQUIPMENT
Camera Inspection Kit
Part No: WIP1
TEN’s inspection camera kit allows the operator to capture High Definition
video and photographs using Wi-Fi technology. Using the GoPro Hero+
it delivers improved image quality and powerful new features geared for
versatility and convenience. SuperView™ is a new video mode that captures
the world’s most immersive wide angle perspective, while Auto Low Light
mode intelligently adjusts frame rate for stunning low-light performance. The
lightweight unit is completely weather proof and is supplied with adaptors to
fit either slot together operating rods or hot sticks with universal fitting such as
the Hastings Telescopic Stick allowing remote inspection up to 12 metres.
• GoPro Camera unit in weatherproof, shock proof, non-conductive
polycarbonate case
• 1 x Adaptor to fit to fit universal rod
• 1 x Adaptor to fit fibreglass stick
• 2 x USB data & cahrge cable
• 1 x Genuine GoPro Charger with twin outlet
• 1 x POV LED Light
HYDRAULIC TOOLS
Hydraulic Kink Remover
Part No: XDH41
The overhead contact wire may have deformations as a result of problems
when unwinding the wire or through the use of pulling grips during servicing on
the overhead wire.
In order to ensure good contact between the contact wire and the pantograph,
it is necessary that the contact wire is straight.
The hydraulic kink-remover can be powered by the Klauke Hydraulic Drive Unit
AHP700L.
The kink-remover can be used on 107sqmm and 150sqmm copper, copper-
cadmium, copper-tin and copper-magnesium contact wires.
Force 40kN
In one operation the kink disappears Weight 3.8kg
Dimensions 205 x 205 x 80mm
Operating Pressure 700 Bar
Carry Case 310 x 280 x 110mm
Includes Quick coupler

TEN Manufactured Canvas and PVC Products

TEN’s range of quality Australian made High Frequency Welded Seams
storage solutions and accessories are TEN now provides high frequency welded seams on
industry proven and tested to our stringent selected PVC material bags featuring the water droplet
quality standards. icon. Equipment bags face the toughest Australian
A range of options are available including customised logos, conditions exposed to the sun, rain, heat and cold. Sewn
identification numbers and warning labels. seam bags can take on water if water pools on top of
seams. By utilising high frequency energy
All our manufactured products use the to instantly heat the thermoplastic
highest quality materials: coating this enables the two
sheets of PVC to be permanently
PVC fused together giving a water
Australian made 600gsm and tight join. Whilst physically not
680gsm high tenacity PVC as strong as a sewn seam it does
made in a tear stop construction have its own distinct advantages including
commonly used in extra heavy abrasion resistance at the seam, resistance to thread decay
duty tarpaulins. Tear stop material is and a neat flush finish.
specially designed to stop further tearing
of a cut or tear in the fabric when it occurs. The Quality Assurance
base fabric is lacquer coated for extra protection and dirt Quality assurance is an integral part of the manufacturing
resistant. It is also flame retardant, mildew resistant and UV process including the design, materials and processes
before all products pass a final quality check and are
resistant.
signed off by TEN staff to IS9001 standards.
Heavy Duty Canvas
Our tear stop canvas has core spun
threads woven throughout for added
strength and resistance to damage.
The canvas is waterproofed during
production and it’s UV resistance
stands up to our harsh Australian QUALITY APPROVED TO OH&S SYSTEM CERTIFIED TO ENVIRONMENTAL SYSTEM CERTIFIED TO
climates. It features excellent shrink AS/NZS ISO 9001:2008
REGN. Number 551
AS/NZS 4801:2001
REGN. Number 3567
AS/NZS ISO 14001:2004
REGN. Number 4279
and colour control and is completely

breathable minimising internal moisture
build up. This canvas is made tough and is Safety
Safe Operating procedures are adhered to by all
commonly used in the transport industry.
manufacturing team members at TEN, and we are proud of
Natural Loomstate canvas (white) is also our accreditation to AS4801 Safety Management Systems.
used as it is untreated and un-dyed, ideal
for the storage and protection of rubber Our safety commitment filters through to the design and
goods. applications of our storage solutions. Manual handling
issues can be reduced with correctly designed shoulder
Webbing & Stitching straps as well as strong handle options. Safety can be
The webbing used comes in three grades increased when sharp tools, pinch points and awkward
and is selected in accordance with the storage application items are covered or stored with the correct storage
and customer requirements; solution.
1. Polypropylene webbing - strong and lightweight
2. Heavy duty polyester webbing (also known as
seat belt webbing) - is used for its strength and low
elongation under load
3. Military webbing - manufactured in accordance with
Australian Defence Force specifications.
Webbing is ideal for support banding and handles, it is light
and strong minimising excess weight for the operator. All
our stitching patterns and materials are designed to provide
maximum strength and resistance to tears improving the
durability and longevity of your storage solutions.
EQUIPMENT TESTERS
Insulator Tester
Part No: IT-4-220P
The Insulator Tester tests energised or de-energised insulators for non-visible
internal failures at any AC line voltage. Detect non-visible insulator failures
before they cause operations difficulties or safety threats to linesman.
• Universal spline for attachment to a hotstick
• Built-in gigohmmeter applies a current limited 10kVDC potential across an
insulator
• Buzzer provides audible warning of bad insulators
• LED scale displays the condition of the insulator being tested
• Powered by an 8VDC rechargeable battery
• Rugged carrying case included
• Lightweight - weighs approximately 1.35 kg
VOLTAGE DETECTOR
Stray Voltage Detector
Part No: LV-5-K01
Includes Holster & The Stray Voltage Detector is used to detect stray voltage as low as 5 volts
Integrated Tester which may be present on any electrically conductive surface such as street light
poles, stay guy wires, transmission poles, meter cans, manhole covers and
many other metallic surfaces in and around electrical utilities.
• Low threshold voltage sensing design picks up voltages from 5 VAC to 600
VAC with direct contact and above 600 VAC at a distance
• Ultra bright, long-lasting red LED indicates when voltage is present
Detects stray • Detector is always on, ready to use, and operates on two AA alkaline
batteries (batteries required)
voltage on • Rugged, utility-grade design is waterproof

• Tester integrated into the holster provides a visual indication of the test
public assets • IEC CAT IV Rated

DETECTORS
V i s u a l & A co u sti c Sofamel’s range of High Voltage Detectors feature new technology that allows
accurate detection from any angle. A red LED light signal and acoustic buzzer
indicates when direct contact has been detected. Direct contact detection
ensures safe indication even in high conflicting electric field environments.
Certified to • Electronic voltage detector by micro controller

IEC 61243 • Self test function - full circuit, not just lights
• Auto power on with voltage presence
• Auto power off after 2 minutes of no voltage presence
• Voltage indicated a visual red LED and 100db@1m acoustic signal
• Acoustic signal exceeds IEC standard to ensure it is heard even
when operated at a distance on a stick
4 3 • Green LED indicates standby mode
• Indoor and outdoor use
• Universal sunrise fitting suits telescopic and sectional sticks
• Supplied in heavy duty metal case with battery included (9V alkaline)
1
2
Electronic Voltage Detector - Medium Voltage
• Orange LED indicates low battery
• Certified to IEC 61243-1:2003 + A1:2009 UNE 61243-1:2003
645220 VT-3/10-U 3 - 10 kV 50 Hz
645225 VT-4/12-U 4 - 12 kV 50 Hz
1. Green LED - Standby Mode 645230 VT-10/30-U 10 - 30 kV 50 Hz
2. Red LED - Voltage Presence 645235 VT-11/33-U 11 - 33 kV 50 Hz
3. Orange LED - Low Battery
4. On/Test Button 645240 VT-15/45-U 15 - 45 kV 50 Hz
645245 VT-22/66-U 22 - 66 kV 50 Hz
Heavy duty
protective case Universal sunrise fitting
Electronic Voltage Detector - High Voltage

• Certified to: IEC 61243-1:2003 + Amend 1:2009 and UNE 61243-1
645162 VT-63/150-U 63 - 150 kV 50 Hz
645172 VT-90/225-U 90 - 225 kV 50 Hz
100db@1m
645182 VT-150/420-U 150 - 420 kV 50 Hz
Acoustic signal 645184 VT-45/420-U* 225 - 420 kV 50 Hz
exceeds IEC 645186 VT-225/420-U* 225 - 420 kV 50 Hz
standard to * Out of IEC Standard
ensure it is
heard even
when operated
at a distance on
a stick
DETECTORS
Sofamel DC Voltage Detector with AC
Induced Voltage Indication
Part No: 645215
• DC voltage: 500 V to 5000 V AC induced voltage: 500 V to 6000 V
• Usage frequency: DC: continuous, AC: 50 Hz / 60 Hz
• High luminosity green LED when no voltage or it is below the established
detection threshold
• Orange LED indicates DC voltage presence
• Red LED indicates AC induced voltage presence
• Green LED flashing indicates low battery
• Green LED off indicates battery level is critical
• Fixed acoustic buzzer for DC voltage presence
• Alternated acoustic buzzer for AC induced voltage presence
Electronic Detector • Fixed acoustic buzzer with different frequency when DC voltage and AC
for Catenary Lines induced voltage are present at the same time
• 9V battery
• Extra flexible earthing cable with silicon sheath and 6m long
• Required insulation pole: With universal head (not included)
• Full self-checking system with automatic disconnection after two minutes
WITHOUT DETECTION
• Auto start-up system using detection of voltage (approx. 500 V DC and 1000 V AC)
• Possibility of exchanging electrode
• DC Threshold from 450 V to 1000 V. AC Threshold – From 450 V to 1000 V
LiveTester Proximity Detector

Part No: LT-220-K
• Audible and visual proximity meter
• Patented ferro electric detector
• Electronic touchpad
• Self test function tests internal circuitry and audio visual features
• Auto power off
• Operator feedback - both audible and visual
Static
LT220 Detection Face • Low battery indication
• Water resistant IP 65 and impact resistant
Discriminator
• All models 50Hz
• Universal/shotgun adaptor
• 3 x “C” size batteries required
• Supplied with canvas protective storage/carry bag

TENSION METER
Dillon Quick-Check Tension Meter
Part No: AWT05-508111
The Dillon Quick-Check Tension Meter quickly measures tension in cable
guardrails, guy lines and overhead wires. It installs, measures and removes
in seconds. The digital loadcell is highly accurate and requires no lookup or
correction tables.
• Store wire rope readings and export data (Ideal for tower data collection)
• Time saving check-tensioning mode
• Portable and rugged – designed for outdoor use
• Built-in averaging saves time and eliminates errors
• Factory calibrated for up to 20 unique wire sizes and types
Specifications
The fastest cable

Tension Capacities 10 kN/1000 kg or 45 kN/4500 kg
tension meter
Wire Sizes 4.75 mm through 25.4 mm
+ 3% instrument capacity (calibrated to specific wire
Accuracy
size and type)
Loading Error Cable elongation of only 2mm
Dot-graphic LCD display supports full text and 25mm
Display
high digits
• Tower and stack guy wires Sheave Range

Each set accommodates rated wire size and 12mm
smaller. Multiple sheave sets may be used.
• Cable barriers Calibrate each wire diameter needed with the most
• Overhead transit wires Suggested Wire appropriate sheaves. If two wire types are used of
• Public Utilities Calibrations different diameters (e.g. 17-2.75 & 19-2.00), calibrate
each type independently.
• Fall arrest Environment Protection Suitable for continued outdoor use
• Aircraft cables Operating Range -20° C to 70° C
Tension Units Of
Pound-force, Kilogram force, Newtons
Measure
Resolution Configurable low/med/high
Size 250 x 590 x 80 mm
Weight Approx 5 kg
At user discretion. Commonly 12-24 months; should be
Recalibration
more frequent with heavy use.
RS-232 port Approvals CE
The Fastest Cable Tension Meter

The Dillon Quick-Check can be placed on a cable, measure its tension, and
removed in under five seconds! There are no complex lookup tables, no
conversion charts. The operator can quickly select from 20 different wire sizes
Carry case included and types stored in Quick-Check’s memory. The Check-Tensioning mode
graphically displays the current and target
tensions for extremely quick setting of
line tension. Even the infrequent
battery changes are quick.
Broad Application
The Quick-Check can be employed in any
industries to ensure proper tensioning. Typical
applications include tower and stack guy wires,
pretensioned cable barriers, bridges, elevators,
winch rope, overhead electric transit wires, fall
arrest systems, aircraft cables and utilities.
420mm
198mm 181mm
230mm
616 - 730mm
Quick-Check Red Quick-Check

Tower and stack guy wires, cable barriers, overhead transit wires, bridges, fall arrest, stage
Industries
support, aircraft cables and public utilities
Capacities 1,000 kg or 4,500 kg
Rope Calibrations Up to 20 (must be specified at time of order) Up to 15 (must be specified at time of order)
Cable Diameter Range 4.75mm to 25.4mm
Informative Display: Shows: Unit, Wire Type,
Display Shows: Unit, Wire Type & Battery
Sheave & Battery
Date and Time Included No
Calibration Reminder Included (setup by distributor) No
AZT (Automatic Zero Tracking) & Filtering Configurable AZT and Filtering Fixed
RS-232 Port 4-Pin Lemo RS-232 output No
Carry Case Included Optional
Enclosure Suitable for continuous outdoor use
Units of Measure Lbf, kgf and Newtons
Temperature Range -20° C to 70° C -20° C to 60° C
Backlight Included (configurable intensity and timer) No
Power 2 - AA Batteries
Battery Life - Tested with backlight off N/A
Accuracy 3% Full Scale
User’s Manual Included, CD
Pass/Fail Tensioning Mode Yes
Warranty 2 Years
Weight 5kgs
Stores wire rope readings to be exported later
Tower Mode No
(Stores each Leg and Wire)
Quick-Check Calibrated to most popular Yes, now available as a new P/N, see price sheet
No
Cell Tower Guy Wires for details

BONDING CLAMPS
The Rail Connector range is designed as a permanent connection for Cu
conductor to a variety of rails used in Heavy Rail Mass Transit systems.
Constructed using a Heavy Duty Air Craft quality steel spring member, Copper
Cable Nest, Indentor, Hex Head Bolt and Locking Nut.
• No need to drill holes in the rail
• No need to weld conductor to the rail
• The rail is not subjected to warping by excessive heat or to weakening by
drilling
• Labor Saving- Installation time is 1/6 man hours
No drilling or
• Fewer rail connections required because of the large conductor capacity
• Single conductors up to 1000 MCM
welding into • Dual conductors up to 750 MCM
the rail
• Large conductors can be bent away from the rail after installation without the
risk of damaging the connector. Unlike Compression type lugs that can crack
during this process
• The Clamp is an active spring that applies a consistent force on the conductor
ensuring a positive connection through heat cycling and train vibration
• The “J” shaped spring member of the connector helps overcome loosening
problems associated with harsh train vibrations by flexing rather than
breaking
• Whereas a Static type connection doesn’t have this resiliency and could
crack under prolonged vibration
• The consistent spring pressure also prevents moisture and contamination from
seeping into the connection
• All Copper components are Tin Plated and Steel Components are
Galvanised
Signal Cable Support Spring Rail Clips

Spring Rail Clips
Part No. Rail Size & Type Cable OD & Capacity Figure#
115-250 115 lb AREA 1.25” x 1 1
140-375 140 lb AREA 1.375” x 1 2
115-250-2S 115 lb AREA 1.095” x 2 - 1.365” x 2 3
115-250-3 115 lb AREA 1.302” x 3 4
100-ARA-B-250-2 100 ARA-B 1.095” x 2 - 5
Note: All part numbers are supplied with standard zinc plated kept nuts. Add suffix ‘n’
to part number to specify a stainless steel nylon insert nut
BONDING CLAMPS
Running Rail Connector
The CPI Running Rail Connector is designed as a permanent connection for Cu
Single Conductor Connectors
Part No. Rail Size & Type Conductor Size & Range
115-1000 115lb AREA 1000MCM - 1250MCM
Two Conductor Connections
115-2-500 115 lb AREA 2250MCM - 2500MCM
For any rail conductor connection not listed above, consult TEN Group.
Running Rail Bonding Connector

1000 MCM Heavy Wall Terminal Lug
Part No. 171320
Material 1/8 Hard DLP Copper Tubing
Capacity 1000MCM Conductor
Finish Tin Plated
Performance UL 486 & NEMA 500 Cycle Standards

Contact Rail Connector

The CPI Contact Rail Connector is designed as a permanent connection for Cu
Part No. Rail Size & Type Conductor Size & Range
150-1000 150lb NMC 1000MCM
150-2000 150lb NMC 2000MCM
Two Conductor Connections
150-2-500 150 lb NMC 2250MCM - 2500MCM
For any rail or conductor combination not listed above, consult TEN Group.
2000 MCM Cathode Connector

The CPI Cathode Connector aka “Pot Head Connector” is designed to connect
a single 2000 MCM conductor from the main feeder directly to the Third
Rail. When used in conjunction with the CPI Contact Rail Clamp, a Pot Head
connector can replace the need for having 4 separate 500 MCM connections
with one single 2000 MCM connection.
• Constructed of High Conductivity Copper
• The assembly comes standard with a Tin Plated Finish (not pictured)
• Incorporates the use of a Stainless Steel hardware for increased strength
and corrosion resistance
• Optional molded fiberglass Insulation Cover available upon request
• Simple 4 bolt installation
• Eliminates the need for any welding
• Recommended for use with the CPI 2000 MCM contact rail connector
2000 MCM Cathode Connector ‘Pot Head Connector’
Part No. Conductor Size
22000 2000MCM
CONDUCTOR CONNECTOR
Wedge Clamps
Aluminium to Wedge Clamp Connectors consist of a spring “C”-Body and wedge combined
Aluminium with a “shear-head” bolt offering a high performance permanent connection
Connector
that is low resistance, durable and easy to install.
MAINTAINS LOW RESISTANCE CONNECTIONS AT ALL TIMES
The spring body of the connector will flex and maintain a constant force as
thermal cycling causes conductors expand and contract.
SIMPLE AND SAFE INSTALLATION
During installation, when proper spring tension is achieved, the shear head bolt
will break off giving the installer a positive indication of a correctly completed
Copper to
Copper connection.
Connector The wedge design has become the only leading wedge system that can be
installed without specialised tooling, providing a safe and easy installation that
No Special toostlsall
reduces or eliminates tooling inventory, maintenance and repair expense.
required for in
• Utilises the industry-proven Wedge Connecting principle and is quick and

easy to apply with a common socket or impact wrench
• The "Spring-Like" qualities of the C-Body ensure permanent connection and
maintains consistent pressure on the conductors
• Quick installation over conventional crimp-type or molded joints
Large Aluminium • Liveline installation with hot-stick tools
Bi-metal Connector with Bail
• For use in all applications including critical high load areas and on
overloaded circuits
• May be used in highly corrosive environments including salt laden areas to
Removable and connect copper conductors
reusable with • High-conductivity grit type corrosion inhibitor is factory applied for long life
no damage to • Removable and reusable with no damage to conductor
conductor • Remains permanently locked through fault current or power surges
• Meets or exceeds the current carrying capacity of the conductors being
connected
Small Aluminium • Complies with AS-NZS 4325 1 -1995
with Bail
Part No Style Main Bail Rating
102009 Wedge Stirrup 10.515 - 13.258mm 550Amp
102010 Wedge Stirrup 7.416 - 10.109mm 550Amp
OPGW 90° 102011 Wedge Stirrup 4.114 - 7.416mm 550Amp
Corner Bends
336915-1 Wedge Stirrup 14.884 - 18.389mm 550Amp
Part No Style Main Tap
210103 Wedge 8.991 - 10.515mm 5.029 - 5.892mm
210106 Wedge 8.991 - 10.515mm 8.991 - 10.515mm
230107 Wedge 11.353 - 12.750mm 5.029 - 5.892mm
Liveline 230110 Wedge 11.353 - 12.750mm 8.991 - 10.515mm
Tap 230111 Wedge 11.353 - 12.750mm 11.353 - 12.750mm
264113 Wedge 12.750 - 14.579mm 8.991 - 10.515mm
264114 Wedge 12.750 - 14.579mm 11.353 - 12.750mm
Earth Grid 264115 Wedge 12.750 - 14.579mm 13.258 - 14.579mm
Connector 336012 Wedge 16.916 - 18.872mm 9.347 - 12.750mm
350123 Wedge 15.468 - 17.373mm 13.258 - 14.579mm
556294 Wedge 21.742 - 24.206mm 20.193 - 23.317mm
Splice Jointer Available for ALL Conductor Sizes

HYDRAULIC TOOLS
Remote Hydraulic Cutting Heads
• For specialist cutting requirements in the vicinity of live power lines in the
electrical utility and railway industries
• SD cutting heads that allow the operator to remotely cut conductor and
tree limbs
ACSR Cutting Head

Part No: SDK20
• Lightweight head for cutting ACSR conductor or steel
dropper wires (railway), up to 20mm diameter
Cu/Al Cutting Head

SDK20 SDA50 SDK32 Part No: SDK32
• Lightweight head for cutting copper or aluminium conductor
up to 32mm diameter
Wood Cutting Head

Part No: SDA50
• A unique lightweight hydraulic head for cutting tree branches
• Reduces the manual exertion required when using mechanical pruners and
branch saws
• Greatly reduces the amount of exposed metal when cutting in close
proximity to live overhead conductors
• Cuts tree limbs up to 50mm diameter
The Klauke Hydraulic Drive unit

suits all cutting heads above
Drive unit with

cutting head

Part No: AHP700LC
HYDRAULIC TOOLS
One head for
crimping, cuttin-g
and punching
one tool for all

• Automatic retraction when operation is complete, manual option if needed
multiple crimpings
Cutting Range 40mm
ADAPTERS - Crimping
Adapter for crimping dies UA12TKL
ADAPTERS - Cutting
Cutting die for Cu/Al conductors, ACSR up to max. 40mmØ UCACSR
crimping
cutting
Cutting die for DIN rails 35 x 15 UCD3515
Cutting die for DIN rails 32 x 15 x 9 UCD3215
Cutting die for DIN rails 35 x 7.5 UCD3575
Cutting die for DIN rails 2980 UCN2980
Cutting die for laminated Cu bus bars, max. width 37.5 mm UCF
Cutting die 107mm² type AC for catenary wires in railway construction UCAC107
punching
ADAPTERS - Punching
For round punches up to 144mmØ, 138x138mm and 68x138mm UA12P
Punching die for DIN rails, 35x15, 32x15x9, 35x7.5 UPD6

TOOL BUCKETS
Canvas Tool Buckets
Part No: TENM206
Part No: TENM201

Part No: TENM203

Part No: TENM207

the hauling line

Part No: TENM408
• Tapered shape
• Bound edges
460 (L) x 200 (W) x 100 (D) 0.5kg

Part No: TENM409
• Bound edges

Part No: TENM410
• Tapered shape
• Bound edges
640 (L) x 200 (W) x 200 (D) 0.7kg

Part No: TENM411
• Tapered shape
inner gloves
• Bound edges

Part No: TENM301
• PVC stick bag
• Bound edges
Reinforced eyelet
Length
8106, HV216 to HV240, MV-25 to MV-40,
Red 1.8m 1.4kg
M-50, SM-30, 81-706

Part No: TENM311

EQUIPMENT BAGS
TENM510
strap with 2 s/
Barrel Bag, PVC

Part No: TENM512
• Webbing handles
650 (L) x 380 (Ø) 0.7kg
Barrel Bag, Canvas

Part No: TENM506
• Webbing handles
TENM506 800 (L) x 380 (Ø) 1.0kg

Part No: TENM402
180 (L) x 70 (W) x 300 (H) 0.2kg
EQUIPMENT BAGS
Equipment Bag - PVC
Part No: TENM511
460 (L) x 290 (H) x 130 (W) 1.0kg
Equipment Bag - PVC

Part No: TENM407
your general test
Earth Bag - PVC

Part No: TENM424
• Velcro flap
• 1 divider
600 (L) x 160 (W) x 600 (H) 1 0.8kg

Cable Strippers
Depth Cut Depth

INSULATED HANDTOOLS
1000V Fully Insulated Diagonal Cutters
• Electrician’s diagonal cutting pliers
• Fine cutting edges, sharpened for copper wire, cuts semi-hard wire up to
160 Kg/mm²

D3-180I 185mm 0.4kg
Fully Insulated
1000V Insulated Pliers - Multigrip
• Sectored multigrip pliers - double grooves
• Burnished finish
Part No Length Opening Weight
D301-310 310mm 42mm 0.7kg
1000V Fully Insulated Pliers - Long Nose

• Long straight-nose half-round pliers
• Fully insulated pliers to limit any risk of short-circuits
• Straight serrated jaws, half-round
• Induction hardened, diagonal cutting edges
Fully Insulated D22D-160I 165mm 0.2kg

D22D-200I 205mm 0.3kg
1000V Fully Insulated Pliers - Combination

• Combination pliers fully insulated to jaws
• Fully insulated pliers to limit any risk of short-circuits
• Flat end grip with cutter jaw
• Rectangular gripping area, straight serration with tube grip
• Induction hardened, diagonal cutting edges
Fully Insulated D1-180I

D1-200I
185mm
205mm
0.3kg
0.4kg
1000V Screwdrivers Flat Head/Round Blade

• 1000V insulated - conforms to CEI 900, NF EN 60900
• ISO 2380:D23/TB, ISO 8764:CRU/POZI/D63
• Vanadium chrome steel
Shaft Shaft
Part No Width Wt Part No Width Wt
Length Length
TB-2.5X50B 50mm 2.5mm 20g CRU-3X100 100mm 3mm 45g
TB-3.5X100 100mm 3.5mm 45g CRU-4X75 75mm 4mm 50g
TB-4X100 100mm 4mm 50g CRU-5X100 100mm 5mm 75g
TB-12X200 200mm 12mm 350g
INSULATED HANDTOOLS
1000V Insulated Torque Wrenches
• For precision tightening
• Automatic release and reset
• Graduated adjustment
CD8-60-12 • Accuracy 4%
CD8-60 - Insulated torque wrench 8-60 Nm • Torque adjuster locked during use
• Supplied with serial number and verification certificate
• Compliant with standard ISO 6789 & NFX 07-011
Part No Length Drive Weight
CD8-60-12 310mm 1/2” 1.0kg
CD8-60R-12
CD8-60R - Insulated torque wrench 8-60 Nm, CD8-60R-12 310mm 1/2” 1.0kg
Reversible drive end.
1000V Insulated Ratchet Wrench

• 1/2’’ reversible insulated ratchet wrench
C250VM
• Unbreakable turnover knob

C250VM 250mm 0.5kg
1000V Insulated Extension

• 1/2’’ insulated extension
R250-250 • 1/2” driving square
R250-250 250mm 0.4kg
1000V Insulated Shifters - Standard & Fully

Insulated
D19-250 • Adjustable wrenches
• Chrome vanadium steel, easy jaw roller - Invisible slip joint
D19-250 260mm 28mm 0.5kg
D19-250I 265mm 32mm 0.6kg
D19-250I
Fully Insulated
1000V Insulated Offset Ring Wrench
• Made from forged steel, vanadium chrome steel
• Long handle for powerful tightening
• Easier to remove embedded nuts angled 12 point fine heads
D13-17 • Chamfer makes it easier to position the wrench
D13-17 215mm 17mm 0.2kg

the energy network
QUALITY APPROVED TO OH&S SYSTEM CERTIFIED TO ENVIRONMENTAL SYSTEM CERTIFIED TO

AS/NZS ISO 9001:2008 AS/NZS 4801:2001 AS/NZS ISO 14001:2004
REGN. Number 551 REGN. Number 3567 REGN. Number 4279
TEN Group : Australia

The Energy Network (Australia) Pty Ltd
ABN 72 093 052 441
HEAD OFFICE - QUEENSLAND
65 Wentworth Place BANYO QLD 4014
PO Box 851 VIRGINIA BC QLD 4014
P|F +61 7 3212 8999 | 8998
W www.tengroup.com.au
E sales@tengroup.com.au
QLD/NT VIC/TAS/SA WA NSW/ACT

65 Wentworth Place 24 Deans Court 4/15 Baile Rd M 0407 009 316
BANYO 4014 DANDENONG STH 3175 CANNING VALE 6155
P|F +61 7 3212 8999 | 8998 P|F +61 3 9793 1622 | 1644 P +61 8 9455 5574
M 0400 077 819 M 0408 228 473 | 0499 988 240 M 0400 029 026
workshop workshop workshop

Full Size Selection Chart

Uploaded by

Copyright:

Available Formats

Full Size Selection Chart

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Full Size Selection Chart

Uploaded by

Copyright:

Available Formats

Product Catalogue

the energy network

Our diversity is your solution.

Our diversity is your solution.

Service & Repair

Good servicing routine and processes

Electric & Petrol Pumps

RJ85A Toe Jacks

Hydraulic Steel Cylinder - Flat Jack

Hydraulic Steel Cylinder - Spring Return

www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 7

Lanyard can be RRP1824 RRP1824-H 18 & 24mm 12pt

threaded through RRP1921 RRP1921-H 19 & 21mm 12pt

12pt Hex Part No.

11400N 11497 & 11521 PCH3

Mumme Sledge Hammer

Ratcheting Cable Cutter

www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 9

Barrel Bag, PVC

Barrel Bag, Canvas

Riggers Pouch - Canvas

Equipment Bag - PVC

Earth Bag - PVC

CABLE PREPARATION TOOLS

www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 11

Lifting Pulling Break

Rope for TFX Series Tirfor

2TON-W-GRIP 1TON-GRIP 2TON-L-GRIP

Jaw Safety Suitable for Wire/ Eye

1TON-GRIP 4 - 22mm 10kN - 1.1kg Yes 17mm

6TON-GRIP 13 - 28mm 60kN 150mm 5.2kg Yes 25mm

www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 15

Battery Powered Cutting Tool >20mmOD

Battery Powered Cutting Tool >32mmOD

Battery Powered Cutting Tools 6T & 12T

www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 17

one tool for all

Allows downlo ads of Head Rotation 360°

Battery Powered Crimping Tool 5T

Die Type CJD3BG CJ22

www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 19

Drive unit with Drive unit with

Ratcheting Cable Cutter

REL-9009 15mm 18mm ACSR - 14.7mm, Steel – 4.7mm 270mm 0.5kg

Ratcheting Cable Cutter

www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 21

The fastest cable

• Tower and stack guy wires Sheave Range

The Fastest Cable Tension Meter

Quick-Check Red Quick-Check

www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 23

A-10 Model A-10 10kN/1T 200N/20kg 135mm 65mm 28mm 0.8kg

Used to measure tension in cables and conductors, the NGK

Dillon Digital Dynamometers

Universal Roller Bracket - Suits SPP-1A

www.tengroup.com.au | Our diversity is your solution. | 07 3212 8999 25

LEWIS CABLE SOCKS

Overhead Single Soft Eye Cable Socks

Titan Braid Rope

SupreemX-12 - Dyneema Fibre Braided Rope