The document provides general notes for a reinforced concrete structure. It specifies dimensions are in millimeters unless otherwise noted. Any discrepancies between drawings must be reconciled before work. Thermo-mechanically treated rebar of grade Fe500D is to be used. Concrete mix is to be M25 grade. Clear cover for rebar is specified for different elements. Anchorage length is to be 49 times the bar diameter. The soil bearing capacity is 180 kN/sqm at 1.5m below grade. The structure has been designed for a stilt level and two stories only.
The document provides general notes for a reinforced concrete structure. It specifies dimensions are in millimeters unless otherwise noted. Any discrepancies between drawings must be reconciled before work. Thermo-mechanically treated rebar of grade Fe500D is to be used. Concrete mix is to be M25 grade. Clear cover for rebar is specified for different elements. Anchorage length is to be 49 times the bar diameter. The soil bearing capacity is 180 kN/sqm at 1.5m below grade. The structure has been designed for a stilt level and two stories only.
The document provides general notes for a reinforced concrete structure. It specifies dimensions are in millimeters unless otherwise noted. Any discrepancies between drawings must be reconciled before work. Thermo-mechanically treated rebar of grade Fe500D is to be used. Concrete mix is to be M25 grade. Clear cover for rebar is specified for different elements. Anchorage length is to be 49 times the bar diameter. The soil bearing capacity is 180 kN/sqm at 1.5m below grade. The structure has been designed for a stilt level and two stories only.
The document provides general notes for a reinforced concrete structure. It specifies dimensions are in millimeters unless otherwise noted. Any discrepancies between drawings must be reconciled before work. Thermo-mechanically treated rebar of grade Fe500D is to be used. Concrete mix is to be M25 grade. Clear cover for rebar is specified for different elements. Anchorage length is to be 49 times the bar diameter. The soil bearing capacity is 180 kN/sqm at 1.5m below grade. The structure has been designed for a stilt level and two stories only.
1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS 8. IN TWO WAY SLAB THE REINFORCEMENT ALONG OTHERWISE SPECIFIED. DRAWING SHALL NOT BE THE SHORTER SPAN SHALL BE AT LOWER LEVEL SCALED-OUT. ONLY WRITTEN DIMENSION SHALL BE UNLESS OTHERWISE SPECIFIED. FOLLOWED. G
9. NOT MORE THAN ONE HALF OF THE TOTAL
2. ANY DISCREPANCY BETWEEN THIS DRAWING AND NUMBER OF THE MAIN BARS SHALL BE ARCHITECTURAL DRAWING SHALL BE BROUGHT TO THE NOTICE OF THIS OFFICE AND SHALL BE GOT LAPPED AT ANY SECTON OF A MEMBER AND THE RECONCILED BEFORE EXECUTION OF WORK. LAPS SHALL BE STAGGERED. F
3. TMT BARS (THERMO MECHANICALLY TREATED
BARS) OF GRADE Fe500D AS PER AGREEMENT SHALL BE 10. 100mm THICK PLAIN CEMENT CONCRETE 1:5:10 USED FOR ALL R.C.C WORKS MARKED AS 'T'. (1 CEMENT: 5 COARSE SAND: 10 GRADED STONE AGGREGATE OF 40mm NOMINAL SIZE) SHALL BE 4. THE MIX FOR ALL R.C.C WORKS SHALL BE DESIGN PROVIDED BELOW THE REINFORCED CONCRETE MIX CEMENT CONCRETE OF SPECIFIED GRADE AS GRADE BEAMS. E
MENTIONED BELOW: 11. THE SAFE BEARING CAPACITY OF THE SOIL HAS a. M25 GRADE FOR ALL RCC WORKS. BEEN TAKEN AS 180 kN / Sq.m AT 1.50 m BELOW THE EXISTING GROUND LEVEL, AS INFORMED BY THE 5. CLEAR COVER FOR MAIN REINFORCEMENT EE/ CED 3 VIDE EMAIL DATED 31.08.2018. D SHALL BE: a. FOOTINGS = 50mm b. COLUMNS = 40mm c. BEAMS = 30mm 12. THE STRUCTURE HAS BEEN DESIGNED FOR d. SLABS = 20mm STILT + 2 STOREYS ONLY . C
6. THE ANCHORAGE LENGTH (OR) DEVELOPMENT
LENGTH SHALL BE 49d WHERE 'd' IS THE DIAMETER OF THE MAIN REINFORCEMENT.
7. THE WATER USED FOR ALL CONCRETE WORKS ENGINEERING PROJECT MANAGEMENT CONSULTANCY AND RESEARCH PVT. LTD. B AN IIT- MADRAS INCUBATED COMPANY
SHALL CONFORM TO CLAUSE 5.4 OF I.S456-2000. CREATING VALUES FOR YOUR INVESTMENT
CLIENT : CONSULTANT :
PROJECT :
ARCHITECT :
SUPPLIER / CONTRACTOR :
JOB No. : TITLE :
DRG. No.
RELEASED FOR PRELIMINARY TENDER INFORMATION APPROVAL CONSTRUCTION
