FAN7380 — Half-Bridge Gate Driver

FAN7380
Half-Bridge Gate Driver
Features Description
 Floating Channel Designed for Bootstrapping The FAN7380 is a monolithic half-bridge gate-drive IC for
Operation to +600 V MOSFETs and IGBTs that operate up to +600 V.
 Typically 90 mA / 180 mA Sourcing/Sinking Current ON Semiconductor’s high-voltage process and
Driving Capability for Both Channels common-mode noise cancelling technique provide
 Common-Mode dv/dt Noise Cancelling Circuit stable operation of high-side driver under high-dv/dt
noise circumstances. An advanced level-shift circuit
 Extended Allowable Negative VS Swing to -9.8 V for
allows high-side gate driver operation up to VS=-9.8
Signal Propagation at VCC=VBS=15 V
V (typical) for VBS=15 V. The input logic level is
 VCC & VBS Supply Range from 10 V to 20 V
compatible with standard TTL-series logic gates. The
 UVLO Functions for Both Channels internal shoot-through protection circuit provides 100
 TTL-Compatible Input Logic Threshold Levels ns dead-time to prevent output switching devices
 Matched Propagation Delay Below 50 ns from both conducting during transition periods. UVLO
 Built-in 100 ns Dead-Time Control Function circuits for both channels prevent malfunction
when VCC and VBS are lower than the specified
 Output In-Phase with Input Signal
threshold voltage. Output drivers typically source /
sink at 90 mA / 180 mA, respectively, which is suitable
Typical Applications for fluorescent / compact fluorescent lamp ballast
applications and systems requiring low di/dt noise.
 Fluorescent Lamp Ballast
 Compact Fluorescent Lamp Ballast
8-SOP

Related Resources
 http://www.onsemi.com/pub/Collateral/AN-6076.pdf.pdf
 http://www.onsemi.com/pub/Collateral/AN-9052.pdf.pdf
 http://www.onsemi.com/pub/Collateral/AN-8102.pdf.pdf

Ordering Information
Device Package Pb-Free Operating Temperature Packing Description
FAN7380MX(1) 8-SOP Yes -40°C ~ +125°C Tape & Reel Lighting Application
Note:
1. This device has passed wave soldering test by JESD22A-111.

© 2005 Semiconductor Components Industries, LLC. Publication Order Number:

October-2017, Rev. 3 FAN7380/D
 FAN7380 — Half-Bridge Gate Driver
Typical Application Circuit
15V 600V

RBOOT DBOOT

LIN 1 LIN VB 8
Q1
R1
HIN 2 HIN HO 7
CBOOT R2
3 VCC VS 6
C1 Q2
R3
4 COM LO 5
Load
R4

FAN7380 Rev.03

Figure 1. Application Circuit for Fluorescent Lamp Ballast

Internal Block Diagram

8 VB

UVLO DRIVER

7 HO
GENERATOR

R
PULSE

NOISE R
CANCELLER S Q

6 VS
HS(ON/OFF)
SCHMITT TRIGGER
HIN 2 INPUT
UVLO 3 VCC

SHOOT THROUGH
PREVENTION
DRIVER

LIN 1
LS(ON/OFF)
DELAY 5 LO
{DEAD-TIME=100ns}

4 COM

FAN7380 Rev.02

Figure 2. Functional Block Diagram

www.onsemi.com
2
 FAN7380 — Half-Bridge Gate Driver
Pin Configuration

LIN 1 8 VB

HIN 2 7 HO
FAN7380
VCC 3 6 VS

COM 4 5 LO

FAN7380 Rev.02

Figure 3. Pin Configuration (Top View)

Pin Definitions
Pin # Name I/O Description
1 LIN I Logic Input for Low-Side Gate Driver Output
2 HIN I Logic Input for High-Side Gate Driver Output
3 VCC I Low-Side Supply Voltage
4 COM Logic Ground and Low-Side Driver Return
5 LO O Low-Side Driver Output
6 VS I High-Voltage Floating Supply Return
7 HO O High-Side Driver Output
8 VB I High-Side Floating Supply

www.onsemi.com
3
 FAN7380 — Half-Bridge Gate Driver
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In
addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. TA=25°C, unless otherwise specified.

Symbol Parameter Min. Max. Unit

VS High-side offset voltage VB-25 VB+0.3
VB High-side floating supply voltage -0.3 625.0
VHO High-side floating output voltage HO VS-0.3 VB+0.3
VCC Low-side and logic-fixed supply voltage -0.3 25.0 V
VLO Low-side output voltage LO -0.3 VCC+0.3
VIN Logic input voltage (HIN, LIN) -0.3 VCC+0.3
COM Logic ground VCC-25 VCC+0.3
dVS/dt Allowable offset voltage slew rate 50 V/ns
PD(2)(3)(4) Power dissipation 0.625 W
JA Thermal resistance, junction-to-ambient 200 °C/W
TJ Junction temperature 150 °C
TS Storage temperature -50 150 °C
Notes:
2. Mounted on 76.2 x 114.3 x 1.6 mm PCB (FR-4 glass epoxy material).
3. Refer to the following standards:
JESD51-2: Integral circuits thermal test method environmental conditions - natural convection
JESD51-3: Low effective thermal conductivity test board for leaded surface mount packages
4. Do not exceed PD under any circumstances.

Recommended Operating Ratings

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance. ON Semiconductor does not recommend
exceeding them or designing to Absolute Maximum Ratings.

Symbol Parameter Min. Max. Unit

VB High-side floating supply voltage VS+10 VS+20
VS High-side floating supply offset voltage 6-VCC 600
VHO High-side (HO) output voltage VS VB
V
VLO Low-side (LO) output voltage COM VCC
VIN Logic input voltage (HIN, LIN) COM VCC
VCC Low-side supply voltage 10 20
TA Ambient temperature -40 125 °C

www.onsemi.com
4
 FAN7380 — Half-Bridge Gate Driver
Static Electrical Characteristics
VBIAS (VCC, VBS) = 15.0 V, TA = 25C, unless otherwise specified. The VIN and IIN parameters are referenced to COM.
The VO and IO parameters are referenced to VS and COM and are applicable to the respective outputs HO and LO.

Symbol Parameter Conditions Min. Typ. Max. Unit

VCCUV+ VCC & VBS supply under-voltage
8.2 9.2 10.0
VBSUV+ positive going threshold
VCCUV- VCC & VBS supply under-voltage
7.6 8.7 9.6 V
VBSUV- negative going threshold
VCCUVH VCC supply under-voltage lockout
0.5
VBSUVH hysteresis
ILK Offset supply leakage current VB=VS=600 V 50
IQBS Quiescent VBS supply current VIN=0 V or 5 V 44 100 µA
IQCC Quiescent VCC supply current VIN=0 V or 5 V 70 180
IPBS Operating VBS supply current fIN=20 kHz, rms value 600
µA
IPCC Operating VCC supply current fIN=20 kHz, rms value 610
VIH Logic "1" input voltage 2.5
V
VIL Logic "0" input voltage 0.8
VOH High-level output voltage, VBIAS-VO 2.8
IO=20 mA V
VOL Low-level output voltage, VO 1.2
IIN+ Logic "1" input bias current VIN=5 V 5 40
µA
IIN- Logic "0" input bias current VIN=0 V 1.0 2.0
IO+ Output HIGH short-circuit pulse current VO=0 V,VIN=5 V with PW10 µs 60 90
V =15 V,VIN=0 V with mA
IO- Output LOW short-circuit pulsed current O 130 180
PW10 µs
Allowable negative VS pin voltage for
VS -9.8 -7.0 V
HIN signal propagation to HO

Dynamic Electrical Characteristics

VBIAS(VCC, VBS) = 15.0 V, VS = COM, CL = 1000 pF and TA = 25C, unless otherwise specified.

Symbol Parameter Conditions Min. Typ. Max. Unit

ton Turn-on propagation delay VS=0 V 70 135 200
(5)
toff Turn-off propagation delay VS=0 V or 600 V 60 130 190
tr Turn-on rise time 160 230 290
ns
tf Turn-off fall time 20 90 160
DT Dead time 80 120 190
MT Delay matching, HS & LS turn-on/off 50
Note:
5. This parameter guaranteed by design.

www.onsemi.com
5
 FAN7380 — Half-Bridge Gate Driver
Typical Performance Characteristics
200 200

Delay [nsec]
Delay [nsec]

VVCC=VBS
CC=VBS
190 VCC=VBS=15V
VCC=VBS=15V

[ns]
190
[ns]

COM=0V 180 COM=0V

COM=0V
180 COM=0V CL=1nF
CL=1nF

Propagation Delay
Propagation Delay

170
L=1nF
CTa=25°C 170 CL=1nF
160 160
TA=25°C High-Side

Turn-OnPropagation
Turn-On Propagation

150 150

140 140
High-Side 130
130
120
120 Low-Side
110
110 Low-Side

Turn-on
Turn-on

100
100
90
90
80
80
-40 -20 0 20 40 60 80 100 120
10 12 14 16 18 20
Supply
Supply Voltage
Voltage[V]
[V] Temperature [°C]
Temperature [°C]

Figure 4. Turn-On Propagation Delay vs. Supply Figure 5. Turn-On Propagation Delay vs. Temp.
Voltage

200 200

[nsec]
Delay[nsec]

VCC=VBS=15V
VCC=VBS=15V
[ns]

VVCC=VBS
CC=VBS Delay [ns]
190
COM=0V COM=0V
180 COM=0V 180 COM=0V
CL=1nF CL=1nF
PropagationDelay
Propagation Delay

CTa=25°C
L=1nF
170 CL=1nF
160 160
TA=25°C
Turn-Off Propagation

150
Turn-OffPropagation

Low-Side Low-Side
140 140
130 High-Side
120 120
High-Side 110
Turn-off

Turn-off

100 100
90
80 80
10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120
SupplyVoltage
Supply Voltage[V]
[V] Temperature
Temperature[°C]
[°C]
Figure 6. Turn-Off Propagation Delay vs. Supply Figure 7. Turn-Off Propagation Delay vs. Temp.
Voltage

350 300

VVCC=VBS
CC=VBS 280 VVCC=VBS=15V
CC=VBS=15V
Time [nsec]
Time[nsec]

COM=0V COM=0V
[ns]

COM=0V COM=0V
[ns]

300 260
CL=1nF CL=1nF
L=1nF
CTa=25°C CL=1nF
240
Rising Time
RisingTime

250 High-Side TA=25°C

220 Low-Side
Turn-On Rising
Turn-onRising

200 High-Side
200
Low-Side 180
Turn-on
Turn-On

160
150
140

120
100
100
10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120

SupplyVoltage
Supply Voltage[V]
[V] Temperature
Temperature[°C]
[°C]
Figure 8. Turn-On Rising Time vs. Supply Voltage Figure 9. Turn-On Rising Time vs. Temp.

www.onsemi.com
6
 FAN7380 — Half-Bridge Gate Driver
Typical Performance Characteristics (Continued)
120 150
140
VVCC=VBS
CC=VBS VVCC=VBS=15V
CC=VBS=15V
Time [nsec]

Time[nsec]
110 COM=0V 130 COM=0V

[ns]
[ns]

COM=0V 120 COM=0V

CL=1nF CL=1nF
100 L=1nF
CTa=25°C 110 CL=1nF
Falling Time

FallingTime
100
High_side TA=25°C High-Side
90
90
Turn-Off Falling

Turn-off Falling
80
70
80 Low-Side
Low-Side 60
50

Turn-Off
Turn-off

70 40
30
60 20
10
50 0
10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120

SupplyVoltage
Supply Voltage [V]
[V] Temperature[°C]
Temperature [°C]

Figure 10. Turn-Off Falling Time vs. Supply Voltage Figure 11. Turn-Off Falling Time vs. Temp.

200 200
190 HIN

180
HIN

180 VVCC=VBS=15V
CC=VBS=15V
COM=0V
LIN
170
COM=0V
LIN

160
CL=1nF
DT1 90%
160 DT1 90%

CL=1nF
DT2
DT2
150 10%
Dead-Time[nsec]

LO
[nsec]
[ns]

LO 10%

140
[ns]

HO 90% 10%
HO 90% 10%
140 130
DT2 120 DT1
Dead-Time

110
Dead-Time

120
Dead-Time

100
90
100 DT1 80 DT2
VVCC=VBS
CC=VBS 70
80 60
COM=0V
COM=0V 50
40
60 CCL=1nF
L=1nF 30
Ta=25°C 20
40 TA=25°C 10
0
10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120
SupplyVoltage
Supply Voltage[V]
[V] Temperature
Temperature[°C]
[°C]
Figure 12. Dead-Time vs. Supply Voltage Figure 13. Dead-Time vs. Temp.

200
130
VCC=VBS
VCC=VBS
[mA]

VCC=VBS=15V
VCC=VBS=15V
Current[mA]

[mA]

180
COM=0V
Current[mA]

120 COM=0V COM=0V

COM=0V
LO=HO=0V 160 LO=HO=0V
110 LO=HO=0V
Ta=25°C LO=HO=0V
SourcingCurrent

SourcingCurrent

140
100
TA=25°C
120
90
High-Side 100
OutputSourcing

Low-Side
Sourcing

80
Low-Side 80
70 High-Side
60
Output

60
Output

40
Output

50 20

40 0
10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120
SupplyVoltage
Supply Voltage[V]
[V] Temperature
Temperature[°C]
[°C]
Figure 14. Output Sourcing Current vs. Supply Figure 15. Output Sourcing Current vs. Temp.
Voltage

www.onsemi.com
7
 FAN7380 — Half-Bridge Gate Driver
Typical Performance Characteristics (Continued)
240 300
VCC=VBS
VCC=VBS 280 VVCC=VBS=15V
CC=VBS=15V
[mA]

220

Current [mA]
[mA]
COM=0V
Current[mA]

COM=0V 260 COM=0V

COM=0V
LO=VCC, HO=VB LO=VCC, HO=VB
200 LO=VCC, HO=VB
Ta=25°C 240 LO=VCC, HO=VB

SinkingCurrent
SinkingCurrent

180 TA=25°C 220

200
High-Side
160 180
Low-Side

OutputSinking
Sinking

Low-Side 160
140
140 High-Side
Output

120 120

Output
Output

100
100
80
80 60
10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120
Supply
SupplyVoltage
Voltage[V]
[V] Temperature[°C]
Temperature [°C]

Figure 16. Output Sinking Current vs. Supply Voltage Figure 17. Output Sinking Current vs. Temp.

[V]
-8.0
High-Side [V]

High-Side [V]
[V]

-4 VCC=VBS
VCC=VBS VCC=VBS=15V
totoHigh-Side
VCC=VBS=15V
Voltage
totoHigh-Side

COM=0V Negative VS Voltage

Voltage
COM=0V
Voltage

-8.5 COM=0V
-6 Ta=25°C COM=0V
TA=25°C
-8
VSVS

-9.0
Allowable Negative VS
Negative

Propagation
Propagatio

-10
Negative

Propagation

-9.5
Propagation

-12
Allowable

-10.0
-14
Allowable
for Signal
Allowable

for Signal

-10.5
-16
for Signal
for Signal

-18 -11.0
10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120

Supply
SupplyVoltage
Voltage [V]
[V] Temperature [°C]
Temperature [°C]

Figure 18. Allowable Negative VS Voltage for Signal Figure 19. Allowable Negative VS Voltage for Signal
Propagation to High-Side vs. Supply Voltage Propagation to High-Side vs. Temperature

100 105
VBS=15V
VCC=VBS 100 VCC=VBS=15V
VCC=VBS=15V
COM=0V COM=0V
80 COM=0V 95 COM=0V
HIN=LIN=0V HIN=LIN=0V
90 HIN=LIN=0V
HIN=LIN=0V
TA=25°C
85
TA=25°C
[uA]
[uA]

60
IQCC [A]

80
[A]

75
IQCC
IQCC

IQCC

40 70
65
60
20
55
50

0 45
0 5 10 15 20 -40 -20 0 20 40 60 80 100 120

Supply
SupplyVoltage
Voltage[V]
[V] Temperature
Temperature[°[°C]
C]

Figure 20. IQCC vs. Supply Voltage Figure 21. IQCC vs. Temperature

www.onsemi.com
8
 FAN7380 — Half-Bridge Gate Driver
Typical Performance Characteristics (Continued)
80 56
VVCC=15V
CC=15V
VCC=15V
54
70 COM=0V
COM=0V COM=0V
HIN=LIN=0V
HIN=LIN=0V 52
60
HIN=LIN=0V
TTa=25°C
A=25°C 50

50 48
[uA]
IQBS [A]

[uA]
QBS [A]
46
40
IQBS

IIQBS
44
30
42

20 40

38
10
36
0 34
0 5 10 15 20 -40 -20 0 20 40 60 80 100 120
Supply Voltage [V]
Supply [V] Temperature
Temperature[°[°C]
C]

Figure 22. IQBS vs. Supply Voltage Figure 23. IQBS vs. Temperature

2.3 2.2
V =V =15V
CC BS
VCC=VBS=15V
VCC =VBS
VCC=VBS
COM=0V
2.2 COM=0V COM=0V
COM=0V HIN=LIN=5V
HIN=LIN=5V
HIN=LIN=5V
HIN=LIN=5V 2.0
2.1 IL=20mA IL=20mA
IL=20mA
2.0 IL=20mA
Ta=25°C High-Side
[V]
[V]

1.8
TA=25°C
VOH [V]

OH [V]

1.9
VVOH

Low-Side
VOH

Low-Side
1.8 1.6
High-Side
1.7
1.4
1.6

1.5 1.2

1.4
10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120

SupplyVoltage
Supply Voltage[V]
[V] Temperature [°C]
Temperature [°C]

Figure 24. High-Level Output Voltage vs. Supply Figure 25. High-Level Output Voltage vs. Temp.
Voltage

0.75
0.80
VCC =VBS
VCC=VBS VCC=VBS=15V
VCC=VBS=15V
COM=0V 0.75 COM=0V
COM=0V
0.70 COM=0V HIN=LIN=0V
HIN=LIN=0V 0.70 HIN=LIN=0V
HIN=LIN=0V
IL=20mA IL=20mA
I =20mA
L
0.65
Ta=25°C
IL=20mA 0.65
[V]
VOL [V]

VOL [V]

TA=25°C 0.60
Low-Side
VOL
VOL

0.60 0.55

0.50 High-Side
0.55 High-Side 0.45

0.40
0.50
Low-Side 0.35

10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120

Supply
SupplyVoltage
Voltage[V]
[V] Temperature[°[°C]
Temperature C]

Figure 26. Low-Level Output Voltage vs. Supply Figure 27. Low-Level Output Voltage vs. Temp.
Voltage

www.onsemi.com
9
 FAN7380 — Half-Bridge Gate Driver
Typical Performance Characteristics (Continued)
7.0
5 IN+ 6.5 HIN=LIN=5V
6.0
4
5.5
VVCC=VBS
CC=VBS HIN
[uA]
IN+/IN- [A]

COM=0V 5.0

[uA]
IN+ [A]
3
COM=0V
IN=VCC or IN=0V LIN
4.5
IN+/IN-

IN=V CC or IN=0V
Ta=25°C

IN+
2 4.0
TA=25°C
3.5
1
3.0
IN-
2.5
0
2.0
0 5 10 15 20 -40 -20 0 20 40 60 80 100 120

Supply
Supply Voltage
Voltage[V]
[V] Temperature
Temperature [°C]
[°C]

Figure 28. Input Bias Current vs. Supply Voltage Figure 29. Input Bias Current vs. Temperature

11 11.0

10.5
VCCUV+/VCCUV- [V][V]

VSBUV+/VSBUV- [V][V]
10 10.0
VCCUV+/VCCUV-

VBSUV+/VBSUV-

VCCUV+ 9.5 VBSUV+

VBSUV+
VCCUV+
9 9.0

VCCUV- 8.5 VBS_UV-

VBSUV-
VCCUV-
8 8.0

7.5

7 7.0
-40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120
Temperature
Temperature [°C]
[°C] Temperature [[°C]
Temperature °C]

Figure 30. VCC UVLO Threshold Voltage vs. Temp. Figure 31. VBS UVLO Threshold Voltage vs. Temp.

2.0 2.6

2.5 VCC=VBS=15V
VCC=VBS=15V
VB-to-COM=650V
VB-to-COM=650V
COM=0V
COM=0V
Input Logic Threshold [V]

2.4
1.5 2.3
VIH (HIN)
VIH(HIN)
2.2
[uA]

VIH(LIN)
LK [A]

2.1 VIH (LIN)

1.0
IILK

2.0

1.9 VIL (LIN)

VIL(LIN)
1.8
0.5
1.7 VILVIL(HIN)
(HIN)
1.6

0.0 1.5
-40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120

Temperature [[°C]
Temperature °C] Temperature [°C]
Temperature [°C]

Figure 32. VB to COM Leakage Current vs. Temp. Figure 33. Input Logic Threshold vs. Temp.

www.onsemi.com
10
 FAN7380 — Half-Bridge Gate Driver
Switching Time Definitions

5V
HIN
HIN 50% 50%
LIN 50% 50%
LIN

tr tf
toff 90%
ton
LO 10%

90% 90%
HO
DT DT
HO 90%
LO 10
10% 10% %

FAN7380 Rev.01 FAN7380 Rev.01

Figure 34. Switching Time Waveforms Figure 35. Internal Dead-Time Timing

www.onsemi.com
11
 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com
Literature Distribution Center for ON Semiconductor USA/Canada
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local
Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative

❖ © Semiconductor Components Industries, LLC www.onsemi.com