BLF8G10LS 270

BLF8G10LS-270
Power LDMOS transistor

Rev. 2 — 1 September 2015 Product data sheet
1. Product profile
1.1 General description

270 W LDMOS power transistor for base station applications at frequencies from
820 MHz to 960 MHz.
Table 1. Typical performance

Typical RF performance at Tcase = 25 C in a common source class-AB production test circuit, tested
on straight lead device.
Test signal f IDq VDS PL(AV) Gp D ACPR5M
(MHz) (mA) (V) (W) (dB) (%) (dBc)
2-carrier W-CDMA 920 to 960 2000 28 67 18.5 33 35[1]
[1] 3GPP test model 1; 64 DPCH; PAR = 8.4 dB at 0.01 % probability on CCDF; 10 MHz spacing.
1.2 Features and benefits

 Excellent ruggedness
 High efficiency
 Low Rth providing excellent thermal stability
 Designed for broadband operation (820 MHz to 960 MHz)
 Lower output capacitance for improved performance in Doherty applications
 Designed for low memory effects providing excellent pre-distortability
 Internally matched for ease of use
 Integrated ESD protection
 Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
 RF power amplifiers for W-CDMA base stations and multi carrier applications in the
820 MHz to 960 MHz frequency range
BLF8G10LS-270
2. Pinning information
Table 2. Pinning
Pin Description Simplified outline Graphic symbol
1 drain
1 1
2 gate
3
3 source [1]
2 2
3
sym112
[1] Connected to flange.
3. Ordering information
Table 3. Ordering information
Type number Package
Name Description Version
BLF8G10LS-270 - earless flanged ceramic package; 2 leads SOT502B
4. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VDS drain-source voltage - 65 V
VGS gate-source voltage 0.5 +11 V
Tstg storage temperature 65 +150 C
Tj junction temperature - 225 C
5. Thermal characteristics
Table 5. Thermal characteristics
Symbol Parameter Conditions Typ Unit
Rth(j-c) thermal resistance from junction to case Tcase = 80 C; PL = 67 W (CW) 0.264 K/W
BLF8G10LS-270#2 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 2 — 1 September 2015 2 of 12

BLF8G10LS-270
6. Characteristics
Table 6. DC characteristics
Tj = 25 C; per section unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
V(BR)DSS drain-source breakdown voltage VGS = 0 V; ID = 4.5 mA 65 - - V
VGS(th) gate-source threshold voltage VDS = 10 V; ID = 450 1.5 1.8 2.3 V
mA
IDSS drain leakage current VGS = 0 V; VDS = 28 V - - 4.2 A
IDSX drain cut-off current VGS = VGS(th) + 3.75 V; - 81.3 - A
VDS = 10 V
IGSS gate leakage current VGS = 11 V; VDS = 0 V - - 420 nA
gfs forward transconductance VDS = 10 V; - 3.91 - S
ID = 450 mA
RDS(on) drain-source on-state resistance VGS = VGS(th) + 3.75 V; - 0.0418 - 
ID = 15.75 A
Table 7. RF characteristics
Test signal: 2-carrier W-CDMA; PAR = 8.4 dB at 0.01 % probability on the CCDF; carrier spacing
10 MHz; 3GPP test model 1; 1-64 DPCH; f1 = 922.5 MHz; f2 = 932.5 MHz; f3 = 947.5 MHz;
f4 = 957.5 MHz; RF performance at VDS = 28 V; IDq = 2000 mA; Tcase = 25 C; unless otherwise
specified; in a class-AB production test circuit.
Symbol Parameter Conditions Min Typ Max Unit
Gp power gain PL(AV) = 67 W 17.3 18.5 - dB
RLin input return loss PL(AV) = 67 W - 14 10 dB
D drain efficiency PL(AV) = 67 W 28.0 33 - %
ACPR5M adjacent channel power ratio (5 MHz) PL(AV) = 67 W - 35 30 dBc
7. Test information
7.1 Ruggedness in class-AB operation

The BLF8G10LS-270 is capable to withstand a load mismatch corresponding to
VSWR = 10 : 1 through all phases under the following conditions: VDS = 28 V;
IDq = 2000 mA; PL = 270 W; f = 820 MHz; f = 869 MHz; f = 920 MHz; f = 960 MHz.

BLF8G10LS-270
7.2 Impedance information

Table 8. Typical impedance
IDq = 2700 mA; main transistor VDS = 28 V.
f ZS[1] ZL[1]
(MHz) () ()
820 1.58  j1.96 1.29  j1.95
869 1.84  j2.70 1.12  j1.83
881 1.78  j2.94 1.12  j1.84
894 1.90  j3.08 1.12  j1.84
920 2.06  j2.50 1.04  j1.13
940 2.10  j2.90 1.04  j1.13
960 2.56  j2.65 1.00  j1.22
[1] ZS and ZL defined in Figure 1.
drain
ZL
gate
ZS
001aaf059
Fig 1. Definition of transistor impedance
7.3 Test circuit information
70 mm 70 mm
C9 C17
C8 C16
C7 C15
C10 R1 C2 C5 C23
C18
60 C1 C4
mm
BLF8G10LS_270_V3 INPUT BLF8G10LS_270_V3 OUTPUT
C14 R2 C3 C6 C24
C22
C11 C19
C12 C20
C13 C21
aaa-004398
Printed-Circuit Board (PCB): Rogers 4350B; r = 3.66; thickness = 0.765 mm;

thickness copper plating = 35 m.
See Table 9 for a list of components.
Fig 2. Component layout for class-AB production test circuit

BLF8G10LS-270
Table 9. List of components

For test circuit see Figure 2.
Component Description Value Remarks
C1, C4 multilayer ceramic chip capacitor 47 pF [1] ATC100B
C2, C3, C5, C6 multilayer ceramic chip capacitor 45 pF [1] ATC100B
C7, C11, C15, C19 multilayer ceramic chip capacitor 0.01 F [2] Murata
C9, C13, C17, C21 multilayer ceramic chip capacitor 1 F [2] Murata
C23, C24 electrolytic capacitor 470 F, 63 V
R1, R2 chip resistor 9.1  [3] Vishay Dale 0805
[1] American Technical Ceramics type 100B or capacitor of same quality.

[2] Murata or capacitor of same quality.
[3] Vishay Dale resistor of same quality.
7.4 Graphical data
7.4.1 CW
aaa-004630
24 80
Gp ηD
(dB) (%)
20 60
Gp
(1)
(2)
(3)
16 40
12 20
ηD
8 0
35 40 45 50 55 60
PL (dBm)
VDS = 28 V; IDq = 2000 mA

(1) f = 920 MHz
(2) f = 940 MHz
(3) f = 960 MHz
Fig 3. Power gain and drain efficiency as function of load power; typical values

BLF8G10LS-270
7.4.2 CW pulsed
aaa-004631
24 80
Gp ηD
(dB) (%)
20 60
Gp
(1)
(2)
(3)
16 40
12 20
ηD
8 0
35 40 45 50 55 60
PL (dBm)
VDS = 28 V; IDq = 2000 mA

(1) f = 920 MHz
(2) f = 940 MHz
(3) f = 960 MHz
Fig 4. Power gain and drain efficiency as function of load power; typical values
7.4.3 1-Carrier W-CDMA
aaa-004632 aaa-004633
22 60 -25
Gp ηD ACPR5M
(dB) (%) (dBc)
20 50 -30
Gp
18 40 -35
(1)
(2)
(3)
16 30 -40
14 20 -45
ηD (1)
(2)
12 10 -50
(3)
10 0 -55
35 38 41 44 47 50 53 38 40 42 44 46 48 50 52
PL (dBm) PL (dBm)
VDS = 28 V; IDq = 2000 mA VDS = 28 V; IDq = 2000 mA

(1) f = 920 MHz (1) f = 920 MHz
(2) f = 940 MHz (2) f = 940 MHz
(3) f = 960 MHz (3) f = 960 MHz
Fig 5. Power gain and drain efficiency as function of Fig 6. Adjacent channel power ratio (5 MHz) as a
load power; typical values function of load power; typical values

BLF8G10LS-270
aaa-004634
8
PAR
(dB)
(1)
(2)
6 (3)
4
38 40 42 44 46 48 50 52
PL (dBm)
VDS = 28 V; IDq = 2000 mA

(1) f = 920 MHz
(2) f = 940 MHz
(3) f = 960 MHz
Fig 7. Peak to average ratio as a function of load power; typical values
7.4.4 2-Carrier W-CDMA
aaa-004635 aaa-004636
22 45 -25
Gp ηD ACPR5M
(dB) (%) (dBc)
Gp
-30
18 35
(1)
(2)
(3) -35
14 25
-40
10 15
ηD -45
(1)
(2)
(3)
6 5 -50
35 37 39 41 43 45 47 49 51 38 40 42 44 46 48 50
PL (dBm) PL (dBm)
VDS = 28 V; IDq = 2000 mA VDS = 28 V; IDq = 2000 mA

(1) f = 920 MHz (1) f = 920 MHz
(2) f = 940 MHz (2) f = 940 MHz
(3) f = 960 MHz (3) f = 960 MHz
Fig 8. Power gain and drain efficiency as function of Fig 9. Adjacent channel power ratio (5 MHz) as a
load power; typical values function of load power; typical values

BLF8G10LS-270
8. Package outline
Earless flanged ceramic package; 2 leads SOT502B
A
F
3
D1 D
U1 c
1
L
H U2 E1 E
b w2 M D M Q
0 5 10 mm
scale
DIMENSIONS (millimetre dimensions are derived from the original inch dimensions)
UNIT A b c D D1 E E1 F H L Q U1 U2 w2
4.72 12.83 0.15 20.02 19.96 9.50 9.53 1.14 19.94 5.33 1.70 20.70 9.91
mm 0.25
3.43 12.57 0.08 19.61 19.66 9.30 9.25 0.89 18.92 4.32 1.45 20.45 9.65
0.186 0.505 0.006 0.788 0.786 0.374 0.375 0.045 0.785 0.210 0.067 0.815 0.390
inches 0.010
0.135 0.495 0.003 0.772 0.774 0.366 0.364 0.035 0.745 0.170 0.057 0.805 0.380
OUTLINE REFERENCES EUROPEAN

ISSUE DATE
VERSION IEC JEDEC JEITA PROJECTION
07-05-09
SOT502B
12-05-02
Fig 10. Package outline SOT502B


BLF8G10LS-270
9. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
10. Abbreviations
Table 10. Abbreviations
Acronym Description
3GPP 3rd Generation Partnership Project
CCDF Complementary Cumulative Distribution Function
CW Continuous Wave
DPCH Dedicated Physical Channel
ESD ElectroStatic Discharge
LDMOS Laterally Diffused Metal Oxide Semiconductor
PAR Peak-to-Average Ratio
VSWR Voltage Standing Wave Ratio
W-CDMA Wideband Code Division Multiple Access
11. Revision history

Table 11. Revision history
Document ID Release date Data sheet status Change notice Supersedes
BLF8G10LS-270#2 20150901 Product data sheet - BLF8G10LS-270 v.1
Modifications: • The format of this document has been redesigned to comply with the new
identity guidelines of Ampleon.
• Legal texts have been adapted to the new company name where
appropriate.
BLF8G10LS-270 v.1 20120817 Product data sheet - -

BLF8G10LS-270
12. Legal information
12.1 Data sheet status

Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
Draft — The document is a draft version only. The content is still under
such equipment or applications and therefore such inclusion and/or use is at
internal review and subject to formal approval, which may result in
the customer’s own risk.
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein Applications — Applications that are described herein for any of these
and shall have no liability for the consequences of use of such information. products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
Short data sheet — A short data sheet is an extract from a full data sheet
further testing or modification.
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and Customers are responsible for the design and operation of their applications
full information. For detailed and full information see the relevant full data and products using Ampleon products, and Ampleon accepts no liability for
sheet, which is available on request via the local Ampleon sales office. In any assistance with applications or customer product design. It is customer’s
case of any inconsistency or conflict with the short data sheet, the full data sole responsibility to determine whether the Ampleon product is suitable and
sheet shall prevail. fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
Product specification — The information and data provided in a Product should provide appropriate design and operating safeguards to minimize the
data sheet shall define the specification of the product as agreed between risks associated with their applications and products.
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid Ampleon does not accept any liability related to any default, damage, costs or
in which the Ampleon product is deemed to offer functions and qualities problem which is based on any weakness or default in the customer’s
beyond those described in the Product data sheet. applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
12.3 Disclaimers avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any Limiting values — Stress above one or more limiting values (as defined in
representations or warranties, expressed or implied, as to the accuracy or the Absolute Maximum Ratings System of IEC 60134) will cause permanent
completeness of such information and shall have no liability for the damage to the device. Limiting values are stress ratings only and (proper)
consequences of use of such information. Ampleon takes no responsibility for operation of the device at these or any other conditions above those given in
the content in this document if provided by an information source outside of the Recommended operating conditions section (if present) or the
Ampleon. Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
In no event shall Ampleon be liable for any indirect, incidental, punitive,
the quality and reliability of the device.
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or Terms and conditions of commercial sale — Ampleon products are sold
replacement of any products or rework charges) whether or not such subject to the general terms and conditions of commercial sale, as published
damages are based on tort (including negligence), warranty, breach of at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
contract or any other legal theory. individual agreement. In case an individual agreement is concluded only the
Notwithstanding any damages that customer might incur for any reason terms and conditions of the respective agreement shall apply. Ampleon
whatsoever, Ampleon’ aggregate and cumulative liability towards customer hereby expressly objects to applying the customer’s general terms and
for the products described herein shall be limited in accordance with the conditions with regard to the purchase of Ampleon products by customer.
Terms and conditions of commercial sale of Ampleon. No offer to sell or license — Nothing in this document may be interpreted or
Right to make changes — Ampleon reserves the right to make changes to construed as an offer to sell products that is open for acceptance or the grant,
information published in this document, including without limitation conveyance or implication of any license under any copyrights, patents or
specifications and product descriptions, at any time and without notice. This other industrial or intellectual property rights.
document supersedes and replaces all information supplied prior to the Export control — This document as well as the item(s) described herein
publication hereof. may be subject to export control regulations. Export might require a prior
Suitability for use — Ampleon products are not designed, authorized or authorization from competent authorities.
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an

BLF8G10LS-270
Non-automotive qualified products — Unless this data sheet expressly

states that this specific Ampleon product is automotive qualified, the product
12.4 Trademarks
is not suitable for automotive use. It is neither qualified nor tested in Notice: All referenced brands, product names, service names and trademarks
accordance with automotive testing or application requirements. Ampleon are the property of their respective owners.
accepts no liability for inclusion and/or use of non-automotive qualified
Any reference or use of any ‘NXP’ trademark in this document or in or on the
products in automotive equipment or applications.
surface of Ampleon products does not result in any claim, liability or
In the event that customer uses the product for design-in and use in entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
automotive applications to automotive specifications and standards, customer the NXP group of companies and any reference to or use of the ‘NXP’
(a) shall use the product without Ampleon’ warranty of the product for such trademarks will be replaced by reference to or use of Ampleon’s own Any
automotive applications, use and specifications, and (b) whenever customer reference or use of any ‘NXP’ trademark in this document or in or on the
uses the product for automotive applications beyond Ampleon’ specifications surface of Ampleon products does not result in any claim, liability or
such use shall be solely at customer’s own risk, and (c) customer fully entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
indemnifies Ampleon for any liability, damages or failed product claims the NXP group of companies and any reference to or use of the ‘NXP’
resulting from customer design and use of the product for automotive trademarks will be replaced by reference to or use of Ampleon’s own
applications beyond Ampleon’ standard warranty and Ampleon’ product trademarks.
specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
13. Contact information

For more information, please visit: For sales office addresses, please visit:
http://www.ampleon.com http://www.ampleon.com/sales

BLF8G10LS-270
14. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 2
4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Thermal characteristics . . . . . . . . . . . . . . . . . . 2
6 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
7 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 3
7.1 Ruggedness in class-AB operation . . . . . . . . . 3
7.2 Impedance information . . . . . . . . . . . . . . . . . . . 4
7.3 Test circuit information . . . . . . . . . . . . . . . . . . . 4
7.4 Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.4.1 CW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.4.2 CW pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7.4.3 1-Carrier W-CDMA . . . . . . . . . . . . . . . . . . . . . . 6
7.4.4 2-Carrier W-CDMA . . . . . . . . . . . . . . . . . . . . . . 7
8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
9 Handling information. . . . . . . . . . . . . . . . . . . . . 9
10 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9
12 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
12.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10
12.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
12.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
12.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
13 Contact information. . . . . . . . . . . . . . . . . . . . . 11
14 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015. All rights reserved.

For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLF8G10LS-270#2

BLF8G10LS 270

Uploaded by

Copyright:

Available Formats

BLF8G10LS 270

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BLF8G10LS 270

Uploaded by

Copyright:

Available Formats

BLF8G10LS-270

Power LDMOS transistor

1.1 General description

Table 1. Typical performance

1.2 Features and benefits

[1] Connected to flange.

Product data sheet Rev. 2 — 1 September 2015 2 of 12

7.1 Ruggedness in class-AB operation

Product data sheet Rev. 2 — 1 September 2015 3 of 12

7.2 Impedance information

[1] ZS and ZL defined in Figure 1.

Fig 1. Definition of transistor impedance

7.3 Test circuit information

BLF8G10LS_270_V3 INPUT BLF8G10LS_270_V3 OUTPUT

Printed-Circuit Board (PCB): Rogers 4350B; r = 3.66; thickness = 0.765 mm;

Product data sheet Rev. 2 — 1 September 2015 4 of 12

Table 9. List of components

[1] American Technical Ceramics type 100B or capacitor of same quality.

7.4 Graphical data

VDS = 28 V; IDq = 2000 mA

Product data sheet Rev. 2 — 1 September 2015 5 of 12

VDS = 28 V; IDq = 2000 mA

7.4.3 1-Carrier W-CDMA

VDS = 28 V; IDq = 2000 mA VDS = 28 V; IDq = 2000 mA

Product data sheet Rev. 2 — 1 September 2015 6 of 12

VDS = 28 V; IDq = 2000 mA

7.4.4 2-Carrier W-CDMA

VDS = 28 V; IDq = 2000 mA VDS = 28 V; IDq = 2000 mA

Product data sheet Rev. 2 — 1 September 2015 7 of 12

Earless flanged ceramic package; 2 leads SOT502B

OUTLINE REFERENCES EUROPEAN

Fig 10. Package outline SOT502B

Product data sheet Rev. 2 — 1 September 2015 8 of 12

11. Revision history

Product data sheet Rev. 2 — 1 September 2015 9 of 12

12. Legal information

12.1 Data sheet status

Product data sheet Rev. 2 — 1 September 2015 10 of 12

Non-automotive qualified products — Unless this data sheet expressly

13. Contact information

Product data sheet Rev. 2 — 1 September 2015 11 of 12

© Ampleon The Netherlands B.V. 2015. All rights reserved.

You might also like