RELITE IP350

SDS N°: 160510

Date of issue: 07/04/2016 - Rev. N°: 3

SAFETY DATA SHEET

SECTION 1: IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND
OF THE COMPANY / UNDERTAKING (*)
1.1 PRODUCT IDENTIFIER : Inert resin
PRODUCT NAME : RELITE IP350
1.2 RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED AGAINST
Relevant identified uses : Ion Exchange
Uses advised against : None

1.3 DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET

MANUFACTURER / SUPPLIER : Resindion S.r.l.
Address : Via Roma, 55 – 20082 Binasco (MI) - ITALY
Telephone : +39.0290.0130.1
Facsimile : +39.0290.047687
Emergency Phone : +39.0290.0130.1 (8:00 – 12:00 / 13:00 – 17:00)
E-mail address : info@resindion.com

SECTION 2. HAZARDS IDENTIFICATION (*)

2.1 CLASSIFICATION OF THE SUBSTANCE OR MIXTURE
2.1.1 Classification according to Regulation (EC) No. 1272/2008 (CLP/GHS)
Classification : not classified

This product does not meet the criteria for classification in any hazard class according to Regulation (EC)
No. 1272/2008 on classification, labelling and packaging of substances and mixtures.

2.2 LABEL ELEMENTS

Hazard pictogram(s) : not applicable
Signal word : no signal word
Hazard statement(s) : no known significant effects or critical hazards
Precautionary statement(s) : not applicable
Supplement hazard information : not applicable

2.3 OTHER HAZARDS

Results of PBT and vPvB

This product does not meet the PBT and vPvB criteria

Other hazards which did not result in classification

Material can cause irritation to eyes. Prolonged or repeated skin contact can cause slight irritation. Do
not step on spilled resins because the resins are very slippery.

Environmental risks
Being non volatile and insoluble, there is no risk to the air and water compartment. Material expected
stable in the ground. No biological degradation observed.

In accordance with EC Regulations reported in Section 15 Page 1 of 8

 RELITE IP350
SDS N°: 160510
Date of issue: 07/04/2016 - Rev. N°: 3

SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS (*)

3.1 SUBSTANCE

Identification name CAS No. EINECS No. Weight % range

High density polyethylene 9002-88-4 Not applicable 100

Within the present knowledge of the supplier, this product does not contain any hazardous ingredient in
quantities requiring reporting in this section, in accordance with EU or national regulations.

SECTION 4. FIRST-AID MEASURES (*)

4.1 DESCRIPTION OF FIRST AID MEASURES

EYE CONTACT : Eye-flush with water for more than 15 minutes. If

necessary, get medical attention.
SKIN CONTACT : Wash with water and soap. In case of irritation, get
medical attention.
INHALATION : Possibility of inhalation is low. Take the patient to fresh air;
in case of difficulty in breathing, medical advice is required.
INGESTION : Not specially necessary in case of small amount. In case of
stomachache, get medical attention.

4.2 MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
See Section 11 for more detailed information on health effects.

4.3 INDICATIONS OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED
See Section 11 for more detailed information on health effects.

SECTION 5. FIREFIGHTING MEASURES (*)

5.1 EXTINGUISHING MEDIA
Suitable extinguishing media : dry chemical, water spray, CO2
Unsuitable extinguishing media : none known

5.2 SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE

Hazards from the substance or
mixture : No specific fire or explosion hazard
Hazardous combustion
products : CO, CO2, O2, H2O. The products of the burning are
dangerous
5.3 ADVICE FOR FIREFIGHTERS
Special protective equipment for
firefighters : Wear self-contained breathing apparatus and fully
protective gear (the melted product adheres to the skin
and causes burns).

Special firefighting procedures : Keep unnecessary people away. In the event of fire, do not
breathe fumes. If possible without risk, move containers
from fire area. Prevent runoff from fire control or dilution
from entering streams, sewers or drinking water supply.

In accordance with EC Regulations reported in Section 15 Page 2 of 8

 RELITE IP350
SDS N°: 160510
Date of issue: 07/04/2016 - Rev. N°: 3

SECTION 6. ACCIDENTAL RELEASE MEASURES (*)

6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
6.1.1 For not-directly involved
personnel : Resins may be slippery. Do not step on the spilled resins.
Avoid contact with skin and eyes. Evacuate non-essential
personnel. Provide adequate ventilation. Possible
production of electrostatic chargings when used.
6.1.2 For directly involved
personnel : Wear appropriate personal protective equipment (see
Section 8)

6.2 ENVIRONMENTAL PRECAUTIONS : Prevent spilled resins from entering sewers, watercourses
or drinking water supply.

6.3 METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP

6.3.1 Advices on how to contain
a spill : cover the drains
6.3.2 Advices on how to clean up
a spill : Vacuum or sweep up and place in designated, labelled and
closed waste containers; have them disposed of by experts.
6.3.3 Other information : not available

6.4 REFERENCE TO OTHER SECTIONS : See Section 1 for emergency contact information
See Section 8 for information on appropriate personal
protective equipment
See Section 13 for additional waste treatment information

SECTION 7. HANDLING & STORAGE (*)

7.1 PRECAUTIONS FOR SAFE HANDLING : Wear safety glasses and protective gloves to avoid eye or
skin contact (see Section 8). Resin handling should be done
in well-ventilated, upwind areas. Eye-washing facilities
must be set in the working area. Do not step on spilled
resins because the resins are very slippery. Avoid high
temperature, sparks and flames. Also avoid contact or
mixture with oxidizing substances. Keep in the original
containers and keep them tightly closed when not in use.
Do not eat, drink and smoke in the areas where the
material is handled. Do not ingest. Observe good personal
hygiene measures such as washing the hands after handling
the material and before eating, drinking and/or smoking.

7.2 CONDITIONS FOR SAFE STORAGE,

INCLUDING ANY INCOMPATIBILITIES: Store in accordance with local regulations. Store in their
original containers in a cool, dry, well-ventilated location at
room temperature (2  30 °C).
Avoid freezing ( 0 °C) and dehydration ( 40°C). Avoid
sunlight exposure. Keep the containers tightly closed. Keep
away from oxidizing substances and separated from
foodstuffs. Open containers should be resealed and kept
upright to prevent spills. Prevent by appropriate
containment the release of the mixture to the environment,
In accordance with EC Regulations reported in Section 15 Page 3 of 8
 RELITE IP350
SDS N°: 160510
Date of issue: 07/04/2016 - Rev. N°: 3

keeping away from drains.

7.3 SPECIFIC END USE(S) : Ion Exchange
Recommendations : not available
Industrial sector specific solutions : not available

SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION (*)

8.1 CONTROL PARAMETERS
OCCUPATIONAL EXPOSURE LIMIT : ACGIH TLV (TWA) not established
(STEL) not established
8.2 EXPOSURE CONTROLS :
8.2.1.APPROPRIATE ENGINEERING CONTROLS: If resin handling is made in-house, general and/or local
exhaust ventilation is preferred.
8.2.2.PERSONAL PROTECTION EQUIPMENT
8.2.2.1 Eye and face protection : Recommended: safety glasses with side shields
8.2.2.2 Skin protection
Hand protection : Chemical resistant protective rubber gloves in accordance
with the appropriate CEN standard should be worn any
time a chemical is handled to prevent skin contact
Other skin protection : Wear appropriate clothing to prevent repeated or
prolonged skin contact, selected in accordance to the task
being performed
8.2.2.3 Respiratory protection : normally not needed.
Should a risk assessment indicate that it is necessary, use a
properly fitted air-purifying or air-fed respirator complying
with the appropriate CEN standard.
8.2.2.4 Thermal hazards : none known
8.2.2.5 Hygiene measures : Ensure that eye-washing facilities are set in the working
area. Handle the material in accordance with good
industrial hygiene and safety practices. Observe good
personal hygiene measures such as washing the hands after
the handling the material and before eating, drinking
and/or smoking. Wash clothing and protective equipment
before reusing to remove contaminants.
8.2.3 ENVIRONMENTAL EXPOSURE
CONTROLS : Prevent by appropriate containment the release of the
mixture to the environment, keeping away from drains.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES (*)

9.1 INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Neutral pellets
Odour : odourless
Odour threshold : not available
pH : not applicable
Melting point / freezing point : 50 °C – 140°C
Initial boiling point and boiling
range : not applicable
Flash point : not applicable
Evaporation rate : not applicable
Flammability (solid, gas) : not applicable
Upper/lower flammability : not available
In accordance with EC Regulations reported in Section 15 Page 4 of 8
 RELITE IP350
SDS N°: 160510
Date of issue: 07/04/2016 - Rev. N°: 3

Explosive limits : not applicable

Vapour pressure : none
Vapour density : none
Relative density : at 20°C 0.9 – 0.97
Solubility : insoluble in water. Soluble in boiling aromatic chlorinated
solvents
Partition coefficient
(n-octanol/water) : not applicable
Auto-ignition temperature : > 360°C
Decomposition temperature : > 360°C
Viscosity : not available
Explosive properties : not applicable
Oxidizing properties : none

9.2 OTHER INFORMATION : No additional information

SECTION 10. STABILITY AND REACTIVITY (*)

10.1 REACTIVITY : the product is stable and not reactive under normal
conditions of use, storage and transport
10.2 CHEMICAL STABILITY : chemically stable under normal conditions of use, under
storage and transport at ambient temperatures
10.3 POSSIBILITY OF HAZARDOUS
REACTIONS : No hazardous reaction will occur under normal conditions
of use and storage
10.4 CONDITIONS TO AVOID : drying ( 40°C) and freezing ( 0°C). Avoid high
temperature, sparks and flames and sunlight exposure.
10.5 INCOMPATIBLE MATERIALS : strong oxidizing substances such as nitric acid, that may
cause hazardous reactions
10.6 HAZARDOUS DECOMPOSITION
PRODUCTS (except burning) : no hazardous decomposition product will be produced
under normal conditions of use, storage and transport

SECTION 11. TOXICOLOGICAL INFORMATION (*)

11.1 INFORMATION ON TOXICOLOGICAL EFFECTS
11.1.2 MIXTURE
Acute toxicity : not classified
Skin corrosion/irritation : repeated and prolonged skin contact may cause mild
transient irritation
Serious eye damage/irritation : direct contact may cause mild eye irritation
Respiratory or skin sensitization: not classified
Germ cell mutagenicity : not classified
Carcinogenicity : not classified
Reproductive toxicity : not classified
STOT – single exposure : not classified
STOT – repeated exposure : not classified
Aspiration hazard : not classified

11.1.5 INFORMATION ON LIKELY ROUTES OF EXPOSURE

Ingestion : May cause discomfort if swallowed
Inhalation : Inhalation of dust might cause transient respiratory
irritation
In accordance with EC Regulations reported in Section 15 Page 5 of 8
 RELITE IP350
SDS N°: 160510
Date of issue: 07/04/2016 - Rev. N°: 3

Skin contact : May cause mild transient irritation

Eye contact : Direct contact may cause eye irritation

SECTION 12. ECOLOGICAL INFORMATION (*)

12.1 TOXICITY : The product presents little or no hazard to the ecosystem.
Prevent spilled resins from entering sewers, watercourses
or drinking water supply.
12.2 PERSISTENCE AND DEGRADABILITY: no information available
12.3 BIOACCUMULATIVE POTENTIAL : no information available
12.4 MOBILITY IN SOIL : Virtually insoluble in water, it floats. The product is not
volatile
12.5 RESULTS OF PBT AND vPvB : This product does not meet the PBT and vPvB criteria
12.6 OTHER ADVERSE EFFECTS : the product is not toxic but small particles might have
physical effects on aquatic and terrestrial organisms

SECTION 13. DISPOSAL CONSIDERATIONS (*)

13.1 WASTE TREATMENT METHODS
PRODUCT
Methods of disposal : Avoid spilled resins from entering sewers, watercourses or
drinking water supply.
Both product residues and uncleaned empty containers
should be sealed, labelled and disposed of by either
incineration or landfill, or recycled under the conditions
which meet local, regional and national laws and
regulations relating to waste in each country. For disposal
within the EC, it is up to the user to assign to the waste the
proper code according to the European List of Wastes
(LoW), on the basis of the application for which the product
was used.
Hazardous waste : within the present knowledge of the supplier, the product
is not classified as hazardous waste, as defined by the EU
Directive 2008/98/EC.
PACKAGING
Methods of disposal : Waste packaging should be recycled wherever possible.
Incineration or landfill should only be considered when
recycling is not feasible.
Special precautions : Both the product and its containers must be disposed of in
a safe way and according to the relevant national and local
regulations.
Empty containers and liners might retain some product
residues: avoid spilled resins from entering sewers,
watercourses or drinking water supply.

SECTION 14. TRANSPORT INFORMATION (*)

Temperature during transportation must be kept more than 0 °C. Avoid freezing ( 0°C) and dehydration (
40°C). Avoid high temperature, sparks and flames. Keep away from oxidizing substances. Keep separated
from foodstuffs.
Not classified as dangerous cargo.
In accordance with EC Regulations reported in Section 15 Page 6 of 8
 RELITE IP350
SDS N°: 160510
Date of issue: 07/04/2016 - Rev. N°: 3

In addition, please follow all regulations in your country

FURTHER INFORMATION
ADR : not applicable
RID : not applicable
ADN : not applicable
IATA : not applicable
IMDG : not applicable
14.1 UN NO. : not applicable
14.2 UN PROPER SHIPPING NAME : not applicable
14.3 TRANSPORT HAZARD CLASS(es) : not applicable
14.4 PACKING GROUP : not applicable
14.5 ENVIRONMENTAL HAZARDS : none
14.6 SPECIAL PRECAUTIONS FOR USER: not regulated
14.7 TRANSPORT IN BULK ACCORDING
TO ANNEX II OF MARPOL 73/78
AND THE IBC CODE : not available

SECTION 15. REGULATORY INFORMATION (*)

15.1 SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS/LEGISLATION SPECIFIC FOR THE SUBSTANCE
OR MIXTURE
EU REGULATIONS:
- EU Regulation (EC) No. 1907/2006 (REACH)
Annex XIV – List of substances subject to authorization
Not listed
Substances of very high concern (SVHC)
Not listed
Annex XVII – Restrictions on the manufacture, placing on the market and use of certain
dangerous substances, mixtures and articles
Not applicable

- EU Regulation (EC) No. 1005/2009 on substances that deplete the ozone layer
Not applicable
- EU Regulation (EC) No. 850/2004 on persistent organic pollutants
Not applicable
- EU Regulation (EC) No. 649/2012 concerning the export and import of dangerous chemicals
Not applicable

Other Regulations
This product does not require a label according to the EU Regulations 1907/2006/EC,
1272/2008/EC
National Regulations
Follow national regulations for work with chemical substances.

15.2 CHEMICAL SAFETY ASSESSMENT : No Chemical Safety Assessment has been carried out for
this mixture by the supplier

SECTION 16. OTHER INFORMATION (*)

HISTORY
Date of issue : 07/04/2016

In accordance with EC Regulations reported in Section 15 Page 7 of 8

 RELITE IP350
SDS N°: 160510
Date of issue: 07/04/2016 - Rev. N°: 3

Revision n° : 3
Date of previous issue : 25/09/2013

(*) This symbol identifies the revised sections

ABBREVIATIONS AND ACRONYMS : ACGIH = American Conference of Governmental Industrial

Hygienists
ADN = European Agreement concerning the International
Carriage of Dangerous Goods by Inland Waterways
ADR = European Agreement concerning the International
Carriage of Dangerous Goods by Road
CAS = Chemical Abstract Service number
CEN = European Committee for Standardisation
CLP = Classification, Labelling and Packaging Regulation
(Regulation EC No. 1272/2008)
CMR = Carcinogen, Mutagen, or Reproductive Toxicant
ECHA = European Chemical Agency
EINCES = European Inventory of Existing Commercial
Substances
GHS = Globally Harmonised system
IATA = International Air Transport Association
IBC code = International Code for the Construction and
Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG = International Maritime Dangerous Goods
PBT = Persistent, Bioaccumulative and Toxic
STEL = short-term exposure limit
STOT = Specific target organ toxicity
TLV = Threshold Limit Value
TWA = time-weighted average
vPvB = Very Persistent and Very Bioaccumulative

REFERENCES : ECHA Guidance on the compilation of safety data sheets –

Version 2.1 February 2014 and Regulation (EU) No.
830/2015.

CLASSIFICATION AND PROCEDURE USED TO DERIVE THE CLASSIFICATION FOR MIXTURES ACCORDING TO
REGULATION (EC) 1272/2008 (CLP) : not classified

RELEVANT H-PHRASES AND/OR

P-STATEMENTS DEFINITIONS : No EU Risk H-Phrases and/or P-Statements were identified
for this product

FURTHER INFORMATION : This -SDS was prepared in compliance with Regulations

(EC) No. 1907/2006/EC, 1272/2008/EC and Regulations
(EU) No. 286/2011, 830/2015.
This product complies in its composition with the EC
Resolution RESAP (2004) 3.
This mixture is exempted from Registration according to
the provisions of Title II and VI as indicated in Article 2(9) of
REACH.

Disclaimer: Judgements as to the suitability of information herein are the purchaser’s responsibility. Although
reasonable care has been taken in the preparation of such information, Resindion extends no warranties, makes no
representations, and assumes no responsibility as to the accuracy or suitability of such information for application to
the purchaser’s intended purpose or for consequences of its use.

In accordance with EC Regulations reported in Section 15 Page 8 of 8