8185:'

sanken I
295,Madampitiya Road,
Golombo 14, Sri Lanka.
GONSTRUGTION (P\'T) LTD. Tel : +94-11-2522939
skyb the limit Fax : +94-11-2522942
Email :sanken@sanken.lk
Website : www.sanken.lk
OUR REF :COA8/08/02L 20'h August 2018.

lul/S.Yunica Design Engineers and Consultants (Pat) Ltd

N o: 18,5t' Michael Ro ad,
Colombo 03.

A t tn. Mr. S. B. P r em ar atn e.

Dcnr Sir,

COLOMBO 1.3,
Wt tnke this opportunity to thankyou for calling us to quote for aboae €t stbnrit lnrttoitlt our quotation
litr sutrc ns follows.

(N CONCRETE RATES

concrete
(irnde of Rate Vat(75%) Total
l5N / 15cm (Special ) Rs. L2,450.00 + 1,868,00 Rs, 14,31.8.00 ptr M,) ( Ewly Strength )
?,5N/20un (Special) Rs. 14,575.00 + 2,187.00 Rs. 1.6,762,00 yur M;l ( Ihrly Strength)
,j0N/20crn (Special) Rs. 1.4,550.00 + 2,183.00 Rs, 16,733.00 l,(r M3 ( Iiarlry Strength)
35N/20cm (Special) Rs. 15,300.00 + 2,295.00 D.
I\J. 1.7,595.00 yr M,i

(B) PUMPING CHARGES

Pttttrying Charges Rs.725,00 per M3 or Rs,21,750.00 per job per day wicheaer is trutrc VA'l' (15%). (Bootn Length2Sm.)
Puttrying Charges Rs.900.00 per M3 or Rs,27,000.00 per job per day wicheuer is rnrtrt VAT (1.5%). ( Boonr Length 38m.)

* This
Quotation is ualied only 30 days.

General Terms €t Conditions :

Refer Terms €t Conditions Attached - GTCON/0l

Tlunking you,

Yours faithfully,

TroN (PW)LTD

fr
Plant

(oar5s
 DcNo 7/R/B-2
Rwision 0l
Design No. : 15N/15/20/EA/ST CONCRETE MIX DESIGN DAT Date 3I/l2l2ol1
Page 0l of0t
( Brilish Melhod Of Design Of Normal Concrete M' xes )
SANKEN CONSTRUCTION (PW LTD., NO. 295, MADA]IIPITIYA ROAD, COLI )MBO 14. TEL 522221 : FAX 5. 22942

BATCHING PLANT - TEL / FAX 2s21834 - s,2st s728.

CONC. GMDE: 15 N/mm2 DESIGN SLA MP: 150 mm

9tage Item Reference or Values

Calculalion
01 l. I Characteristic strength Speci/ied Compressive 15 N/mm2 at Days
Proportion defective percet
1.2 Standard deviahon 4.0 N/mm2 or no data N/mm

1.3 Margin C1 (k: 1.64 ) 1.64 x 4.0 N/mm

ta
1.4 Target mean strength C2 & Para 8.1 15 T/ N/mm
*l.4.1 Air content 2.0 %
*1.4.2 Modified target mean strength 22 /(l-0.055x 2.0 ) 25 N/mm
1.5 Cement type Specified (oPC/SRPC/RHPC)
1.6 Aggregate type : Coarse Crushed Granite
Aggregate type : Fine River sand
1.7 Free water I cemenl ratio Table2,Fig4 0.76
1.8 Maximum free water I cement ratio Specified Use the lower value

02 2.1 Slump or V-B Speci/ied Slump I50 mm or V-B s

2.2 Maximum aggregate size Specified mm

2.3 Free water content Table3&Para8.2

03 3.1 Cement content C3 198 / 0.56 354 kg/m

3.2 Maximum cement content Specified kg/m

3.3 Minimum cement content Specified 210 kg/m3
use 3.1 if < 3.2
use 3.3 if >- 3.1 354
3. 4 Modifi ed fre e w ater I cement ratio

04 4.1 Relative density of aggregate (SSD) 2.69 known / assumed

4.2 Concrete density Fig5&Para8.3 2415 - (10 x 2U 2-!L 2361 kg/m3
4.3 Total aggregate content C4 2361 - 354 198 1809 kg/m3

05 5.1 Grading ofFine aggregate Percentage passing 600 pm sieve Maximum 50 Minimum 30 percent
5.2 Proportion of Fine aggregate 45 to 5J selected 47 percent
5.3 Fine aggregate content C5 1809 x 0.47 kg/m3
5.4 Coarse aggregate content C5 1809 - 850 kg/m3

Quantities Cemenl llaler Fine Coarse Admirture 1 Admixture 2

(kg $9 aggregate aggregate Adcrete
(kil fts) (ml) (ml) (ml)
Per mt 354 198 850 9s9 r 593

Per lrial mix of 0.04 m3 14.16 7.92 34.00 38.36 63.72

7 DAYS AVERAGE COMPRESSIVE STRENGTH lS ABOVE l5N/mm2

g,
colrsT RucTrolr (Pw) LTD
# Designed as per BS 5328. shy's thelinit
i
 D@.No. 1/RlB-2
Revi sion 0l
Design Na : 25N/20/20/EA-ST/02 CONCRETE MIX DESIGN DAL Date . 3r112/20t1
Page. 01 of 0l
British Method Of Design Of Normal Concrete Mt xes ,
(
SANKEN CONSTRUCTION (PW) LTD. , NO, 295 , MADAMPITIYA ROAD ' COLO] ,IBO 14. TEL 522221 : FAX 52' t942
BATCHING PLANT - TEL / FAX 2521834 - 5,252 5728.

CONC. GRADET Z!r,ttZ-' DESIGN SLL 'MP: 200 mm

Stage Item Reference or Values

Calculation
0t l. I Characteristic strength Specified Compressive 25 N/mm' at Days
Proportion defective percent
1.2 Standard deviation 6.0 N/mm2 or no data N/mm'
1.3 Margin C] (k-1.64) 1.64 x 6.0 N/mm2

1.4 Target mean strength C2 & Para 8.1 25+10 N/mm2

*1.4.1 Air content 2.0 %
*
1.4.2 Modifi.ed target mean strength 35 /(1-0.055x 2.0 ) N/mm2

1.5 Cement type Speci/ied (oPC/SRPC/RHPC)

1.6 Aggregate type : Coarse Crushed Granite
Aggregate type : Fine M.Sand
1.7 Free waler I cement ratio Table2,Fig4 0.63
I .8 Maximum free waler I cement ratio Specified Use the lower value

02 2.1 Slump or V-B Specified Slump 200 mm or V-B - .t

2.2 Maximum aggregate size Specified 20 mm

J
2.3 Freewater content Tabte3&Para8.2 174

3.1 Cement content C3 t74 / 0.49 355 kg/m

03
3.2 Maximum cement content SpeciJied 500 kg/m

3.3 Minimum cement content Specified 230 kg/mr

use 3.1 if < 3.2
use 3.3 if >- 3.1
j. 4 Modified free water/ cement ratio

04 4.1 Relative density ofaggregate (SSD) 2.69 known / assumed

4.2 Concrete density Fig5&Para8.3 2415 kg/m3

4.3 Total aggregate content c4 241 5 355 - 174 1886 kg/m3

05 5.1 Grading ofFine aggregate Percentage passing 600 pm sieve Maximum 50 Minimum 30 percenl
5.2 Proportion ofFine aggregate 42 to 50 selected 48 percenl
5.3 Fine aggregate content C5 1886 x 0.48 kg/m3

5.4 Coarse aggregate content c5 1886 905 kg/m3

Quantilies Cement llaler Fine Coarse Admixture I Admirture 2

(kg) (kg aggregate aggregate Hypercrete fl.l*t ut
(kd &s) (ml) tut)
Per m' 355 I 74 905 981 3900

Per trial mix of 0.04 m3 t4.20 6.96 36.20 39.24 156.00

7 DAYS AVERAGE COMPRESSII/E STRENGTH IS ABOVE 25N/mm2 $am*en

GO]ISTRUGTIO]I (PwlrTD
shy's tlulinrt
# Designed as per BS 5j28.
Dalgn No. : 30N20/20/EA-ST CONCRETE MIX DESIGN DATZ
( Brilish Method Of Design Of Normal Conuete Mi
5221 t42
SANKEN CONSTRUCTION (PVT) LTD., NO, 295' MADAMPITIYA ROAD' COL( ,MBO 14. TEL 522221 : FAX
BATCHING PLANT - TEL / FAX 2521834 - 5,252. ,728.
CONC. GRADE: 30 N/mm2 DESIGN SLA MP: 200 mm

Stage Ilem Reference or Values

Calculation
I Specified Compressive 30 N/mm Days
0l l. Characteristic strength
Proportion defective percent

1.2 Standarddeviation 6.0 N/mm2 no data N/mm2

1.3 Margin C1 (k: t.64 ) 1.64 N/mm2

C2 & Para 8.1 30 N/mm2
1.4 Target mean strength
+
I .4.I Air content 2.0 %
*1.4.2 Modifi.ed target mean strength 40 /(1-0.055x 2.0 ) N/mm2

1.5 Cement type Specified (oPC/SRPC/RHPC)

1.6 Aggregate type : Coarse Crushed Granite
Aggregate type : Fine M.Sand
1.7 Free water I cement ratio Table2,Fig4 0.52
1 .8 Maximum free water I cement ratio Specified 0.65 Use the lower value

02 2.1 Slump or V-B Specified Slump 200 mm or V-B s

2.2 Maximum aggregate size Specified 20 mm

3
2.3 Free water content Table3&Para8.2 165

i.l Cement content C3 t 65 / 0.43 j84 kg/m

03
3.2 Maximum cement content Specified kg/m

3.3 Minimum cement content Specified kg/m3

use 3.1 if < 3.2
use 3.3 if >- 3.1 384
3. 4 M o diJi e d fr e e w ater I cernent r at io

04 4.1 Relative density ofaggregate (SSD) 2.69 known assumed

4.2 Concrete density Fig5&Para8.3 2420 kg/m3

4.i Total aggregate content c4 2420 354 - 165 : 187I kg/m3

05 5. I Grading of Fine aggregate Percentage passing 600 pm sieve Maximum 50 Minimum 39_ percenl

5.2 Proportion ofFine aggregate 48 selected : 47 percent

C5 kg/m3
5.3 Fine aggregate content
C5 kg/m3
5.4 Coarse aggregate content

Quantilies Cement lYaler Fine Coarse Admixlure I Admixture 2

(kg &9 aggregate aggregate Ilpercrele Plus M
(kil &s) tuI)
Per m 384 165 3072

Per lrial mix ol 0.04 m3 t s.36 6.60 122.88

8an
GolrsTRUCTroll (PWl tTD
slry's thelbnrt
**7 Dav Avorape Compressive Strengrh is obove 30 N/mm2
 t1

lDm.No. 7,R-/B-2
lRwisim.0l
Desigtt No. : 3 5N/20/20/SAN/PPC-02 CONCRETE MIX DESIGN DATA lDate. 1I/12/2Oll.
lPage. 0l of01
( Bfiish Method Of Design Of Normal Concrete Mixes )
CONSTRUCTION (pW) LTD. , NO. 295 , MADAMPITIYA ROAD, COLOMBO 14. TEL 522221 : FAX 522942
'ANKEN BATCHING PLANT - TEL / FAX 2521834- 5,2525728.
CONC. GRADET SS Xt^^t DESIGNSLUMP: 200L25 mm
DESIGN FLOI{: 450t25 mm
Stage Ilem Reference or Values
Calculation
01 l. I Characteristic strength Specified Compressive _ 35 N/mm' at Days
Proportion defective percet
1.2 Standarddeviation 6.0 N/mm2 or no data - N/mm

1.3 Margin C1 (k-1.64) 1.64 x 6.0 10 N/mm

1.4 Target mean strength C2 & Para 8.1 35+10 45 N/mm

*1.4.1 Air content 2.0 %
*1.4.2 Modified target mean strength 45 /(1-0.055x 2.0 5l N/mm

1.5 Cement type Specified (PPC/SRPC/RHPC) PPC

1.6 Aggregate type : Coarse Crushed Granite
Aggregate type : Fine M. Sand
L7 Free water I cement ratio Table2,Fig4 0.48
I .B Maximum free water I cemenl ratio Specified 0.60 Use the lower value

02 2.1 Slump or V-B Specifi.ed Slump

2.2 Maximum aggregate size SpeciJied

2.3 Free water content Table3&ParaB.2

03 3.1 Cement content C3 t 65 / 0.39 423 kg/m3

3.2 Maximum cement content SpeciJied kg/m

3.3 Minimum cement content Specifi.ed 400 kg/m3

use 3.1 ,f < 3.2
use 3.3 if >- 3.1 423
3. 4 Modified free water| cemerfi ratio

04 4.1 Relative density ofaggregate (SSD) 2.72 known / assumed

4.2 Concrete density Fig5&Para8.3 2460 kg/m3

4.i Total aggregate content C4 2460 42i - 165 1872 kg/m3

05 5. I
Grading of Fine aggregate Percentage passing 600 pm sieve Maximum 50 Minimum 30 percent
5.2 Proportion ofFine aggregate - to - selecled :46 percent
5.3 Fine aggregate conlent C5 1872 x 0.46 Kg/m

5.4 Coarse aggregate content c5 1872 - 861 101 1 t-

1 KP/m

Quanlities Cemenl ll/aler Fine Coarse Admirture I

(kg &9 aggregate aggregate Hypercrele PIU
(kd fte) (ml)
Per m 423 165 86t l0l I 3400

Per trial mix of 0.04 m3 r 6.92 6.60 34 44 10.44 I36.00

**Cement Brand is Holcim Ef,ra**

GoilsrRucTroil (Pw)LTll
stry's tfulinil
# Desipned as per BS 5328.