Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 292 views

    Ajuste de Eaton Embrague

    Uploaded by

    Hamilton Miranda
    This service bulletin from Mack Trucks provides instructions for replacing the piston cooling valve on MP8 engines. It describes removing the old piston cooling valve by disconnecting battery cables and cleaning the area, then installing the new valve which involves lubricating seals, placing the valve in the housing, and reconnecting wiring if needed. Technicians are advised to follow safety precautions and check for leaks after replacing the valve.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ajuste de Eaton Embrague

    Uploaded by

    Hamilton Miranda
    292 views5 pages
    This service bulletin from Mack Trucks provides instructions for replacing the piston cooling valve on MP8 engines. It describes removing the old piston cooling valve by disconnecting battery cables and cleaning the area, then installing the new valve which involves lubricating seals, placing the valve in the housing, and reconnecting wiring if needed. Technicians are advised to follow safety precautions and check for leaks after replacing the valve.

    Original Description:

    Mack mp7 y8

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This service bulletin from Mack Trucks provides instructions for replacing the piston cooling valve on MP8 engines. It describes removing the old piston cooling valve by disconnecting battery cables and cleaning the area, then installing the new valve which involves lubricating seals, placing the valve in the housing, and reconnecting wiring if needed. Technicians are advised to follow safety precautions and check for leaks after replacing the valve.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    292 views5 pages

    Ajuste de Eaton Embrague

    Uploaded by

    Hamilton Miranda
    This service bulletin from Mack Trucks provides instructions for replacing the piston cooling valve on MP8 engines. It describes removing the old piston cooling valve by disconnecting battery cables and cleaning the area, then installing the new valve which involves lubricating seals, placing the valve in the housing, and reconnecting wiring if needed. Technicians are advised to follow safety precautions and check for leaks after replacing the valve.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5
    At a glance
    Powered by AI
    The document provides instructions for servicing the piston cooling valve on MACK MP8 engines, including removal and installation procedures.

    The steps to remove a piston cooling valve include disconnecting battery cables, cleaning the area, removing the valve and spring, and catching any draining oil.

    The steps to install a piston cooling valve include cleaning the contact surface, lubricating seals, inserting the valve and spring, and reinstalling other components.

    Service Bulletin

    Mack Trucks, Inc.


    Milton, QLD, Australia Trucks
    Date Group No. Release Page
    7.2015 222 23 01 1(5)

    Piston Cooling Valve, Replacement


    MP8
    Piston Cooling Valve, Replacement

    W2006584

    This information covers servicing the piston cooling valve on MACK MP8 engines.

    Contents
    • “Piston Cooling Valve, Replacement”, page 2

    Note: Information is subject to change without notice.


    Illustrations are used for reference only and can differ slightly from the actual vehicle being
    serviced. However, key components addressed in this information are represented as
    accurately as possible.

    PV776-89213758
    USA72065 English
    Mack Trucks, Inc. Date Group No. Release Page
    Service Bulletin 7.2015 222 23 01 2(5)

    Service Procedures
    2229-03-02-05
    Piston Cooling Valve, Replacement
    You must read and understand the precautions and
    guidelines in Service Information, Function Group 20,
    "Engine Safety Practices" before performing this pro-
    cedure. If you are not properly trained and certified in
    this procedure, ask your supervisor for training before
    you perform it.

    Removal
    1
    Remove all battery cables from ground (negative) termi-
    nals to prevent personal injury from electric shock.

    2
    Open the hood.

    3
    Clean the area around the piston cooling valves.

    4
    On MP8 engines without electric thermal management
    system: Remove the desired piston cooling valve and
    spring from the oil filter housing.
    Note: Catch any oil that drains in an approved container.

    W2005248

    1 Oil Cooler Control (Bypass) Valve


    2 Oil Pump Safety Valve Marking (Violet)
    3 Reduction Valve Marking (Blue)
    4 Piston Cooling Control (Balancing) Valve
    5 Piston Cooling Opening Valve
    6 Full Flow Oil Filter Overflow Valve
    7 Bypass Oil Filter Overflow Valve
    Mack Trucks, Inc. Date Group No. Release Page
    Service Bulletin 7.2015 222 23 01 3(5)

    5
    On MP8 engines with electric thermal management sys-
    tem: Disconnect the wiring harness from the piston cool-
    ing valve. Remove the piston cooling valve fasteners and
    remove the piston cooling valve from the oil filter
    housing.
    Note: Catch any oil that drains from the housing in an ap-
    proved container.

    W2053702

    1 Piston Cooling Valve


    2 Controlled Oil Cooler Thermostat Valve
    3 Access Port (Oil Gallery Cleaning)
    4 Full-Flow Oil Filter Overflow Valve (Bypass Valve)
    Mack Trucks, Inc. Date Group No. Release Page
    Service Bulletin 7.2015 222 23 01 4(5)

    Installation
    1
    Wipe and clean the valve contact surface in the oil filter
    housing.

    2
    On MP8 engines without electric thermal management
    system: Place a new seal on the retainer plug and lubri-
    cate the seal with clean engine oil. Insert the replace-
    ment piston cooling valve and spring into the valve bore.
    Compress the spring and install the retainer plug into the
    housing.
    Note: Make sure that the O-ring is not damaged during
    installation.

    Note: The valves can be installed either way.

    W2005248

    1 Oil Cooler Control (Bypass) Valve


    2 Oil Pump Safety Valve Marking (Violet)
    3 Reduction Valve Marking (Blue)
    4 Piston Cooling Control (Balancing) Valve
    5 Piston Cooling Opening Valve
    6 Full Flow Oil Filter Overflow Valve
    7 Bypass Oil Filter Overflow Valve

    3
    Install any remaining components such as oil filters and
    check the engine oil level. Add oil as necessary.

    4
    On MP8 engines with electric thermal management sys-
    tem: Lubricate a new O-ring with clean engine oil and in-
    stall onto the piston cooling valve. Install the piston
    cooling valve into the valve bore in the oil filter housing.
    Install the mounting fasteners and tighten to specifica-
    tion. Connect the wiring harness to the piston cooling
    valve solenoid.

    W2053702

    1 Piston Cooling Valve


    2 Controlled Oil Cooler Thermostat Valve
    3 Access Port (Oil Gallery Cleaning)
    4 Full-Flow Oil Filter Overflow Valve (Bypass Valve)
    Mack Trucks, Inc. Date Group No. Release Page
    Service Bulletin 7.2015 222 23 01 5(5)

    5
    Install all previously removed cables to ground (negative)
    battery terminals.

    6
    Start the engine and check for leaks.

    7
    Close the hood.

    8
    Use premium tech tool (PTT) to read and clear any diag-
    nostic trouble codes (DTC) that may have occurred.

    You might also like