Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 94 views

    RCX Partial Wraps PDF

    Uploaded by

    MRousstia
    This document discusses ims RCX Partial Wrap (PW) Series chip resistors that are well-suited for RF and microwave applications. They are designed to be mounted face-down on circuit boards to minimize parasitic effects. The resistors feature ultra leach resistant terminals that maintain integrity during solder reflow. They have a frequency response of ±1% from 2GHz to 26.5GHz and resistances from 10Ω to 2KΩ with tolerances of ±1% and TCR of ±100ppm/°C. Orders use part number codes to specify terminal material, resistance value, tolerance, and power rating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RCX Partial Wraps PDF

    Uploaded by

    MRousstia
    94 views2 pages
    This document discusses ims RCX Partial Wrap (PW) Series chip resistors that are well-suited for RF and microwave applications. They are designed to be mounted face-down on circuit boards to minimize parasitic effects. The resistors feature ultra leach resistant terminals that maintain integrity during solder reflow. They have a frequency response of ±1% from 2GHz to 26.5GHz and resistances from 10Ω to 2KΩ with tolerances of ±1% and TCR of ±100ppm/°C. Orders use part number codes to specify terminal material, resistance value, tolerance, and power rating.

    Original Title

    rcx_partial_wraps.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses ims RCX Partial Wrap (PW) Series chip resistors that are well-suited for RF and microwave applications. They are designed to be mounted face-down on circuit boards to minimize parasitic effects. The resistors feature ultra leach resistant terminals that maintain integrity during solder reflow. They have a frequency response of ±1% from 2GHz to 26.5GHz and resistances from 10Ω to 2KΩ with tolerances of ±1% and TCR of ±100ppm/°C. Orders use part number codes to specify terminal material, resistance value, tolerance, and power rating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    94 views2 pages

    RCX Partial Wraps PDF

    Uploaded by

    MRousstia
    This document discusses ims RCX Partial Wrap (PW) Series chip resistors that are well-suited for RF and microwave applications. They are designed to be mounted face-down on circuit boards to minimize parasitic effects. The resistors feature ultra leach resistant terminals that maintain integrity during solder reflow. They have a frequency response of ±1% from 2GHz to 26.5GHz and resistances from 10Ω to 2KΩ with tolerances of ±1% and TCR of ±100ppm/°C. Orders use part number codes to specify terminal material, resistance value, tolerance, and power rating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Partial Wraparound Thick Film

    Chip Resistors for High Frequency Applications


    The ims RCX Partial Wrap (PW) Series flip-chip resistors are ideally suited for RF & Microwave applications.
    They are designed to be mounted ‘face-down’ on a circuit board which keeps the resistive element on the same
    plane as circuit traces thus minimizing parasitic effects experienced with wraparound resistors. Additionally the
    RCX PW’s unique design allows for proper visual inspection of the terminal connection with it’s solder filet. The
    ‘X’ designation in each series is a variable that allows for specifying the terminal metallization. Please see
    ordering information on page two for instructions.
    This series features ims’ optional non-magnetic Ultra Leach Resistant type terminals which have been proven
    to maintain their integrity in the most extreme solder reflow environments, including high temperatures and
    multiple reflows. They have been shown to withstand over 15 minutes in 260°C 60/40 solder with little or no
    Partial Wraparound degradation.
    These chip resistors have the following features:
    • Stable resistance over frequency
    • 96% Al²O³ substrate material
    • Tolerances to ±1% Non-Magnetic
    • Available in bulk or tape and reel
    • Jumpers available (use value code JUMPR in part number)

    Terminal metallizations
    Base Metal No Finish Metal 6Q6ROGHU&RDW Sn96 Solder Coat
    PN Prefix PN Prefix PN Prefix
    Platinum Silver (PtAg) RC3- RCC- RCP-
    ULR Platinum Silver (PtAg) RC8- RCH- RCR-
    Platinum Gold (PtAu) RC4- RCD- RCQ-

    Indicates RoHS Compliance

    Terminal Style

    Features )UHTXHQF\5HVSRQVHRIŸ5HVLVWRUV
    from 2GHz to 26.5GHz
    100
    Ultra Leach Resistant
    terminals Two frequency response curves of the RCC- 90
    0502PW are shown here to illustrate the flatness
    of the response of ims’ RCX Partial Wrap
    80
    Resistance, Ohms

    Thick film technology resistors. S-Parameters of all RCX PW sizes can 70


    be found on the ims website. Measurements
    ZHUHWDNHQRIŸDQGŸUHVLVWRUVZLWKLQD 60
    Excellent RF & Microwave span of 2GHz to 26.5GHz.
    50
    Performance 40
    30
    Resistance values from
    20
    ŸWR.Ÿ
    10

    Tolerances to ±1% )UHTXHQF\5HVSRQVHRIŸ5HVLVWRUV 0 5 10 15 20 25 30


    from 2GHz to 26.5GHz
    250 Frequency GHz
    TCR to ± 100PPM/°C 225
    200 The response does not change appreciably at
    different resistance values. Similar response
    Resistance, Ohms

    175 can be expected from other size resistors within


    150 the RCX PW Series and within the resistance
    range for the respective size.
    125
    100
    50 Schoolhouse Lane 75
    Portsmouth, RI 02871
    Tel (401) 683-9700 50
    Fax (401) 683-5571
    e-mail: ims@ims-resistors.com 25
    http://www.ims-resistors.com 0
    5 10 15 20 25 30
    Frequency GHz
    Dimensions (inches)

    Part Number Length Width Height Terminal

    W
    RCX-0302PW 0.030 ± .005 0.020 ± .003 0.020 max. 0.004 min.
    RCX-0402PW 0.040 ± .005 0.020 ± .005 0.020 max. 0.005 min.
    H L
    RCX-0502PW 0.050 ± .005 0.020 ± .005 0.020 max. 0.009 min.
    RCX-0603PW 0.060 ± .005 0.030 ± .005 0.020 max. 0.009 min.
    RCX-0805PW 0.080 ± .005 0.050 ± .005 0.020 max. 0.015 min. T

    Specifications
    RCX-0302PW RCX-0402PW RCX-0502PW RCX-0603PW RCX-0805PW

    Operating temp -55 to 150oC -55 to 150oC -55 to 150oC -55 to 150oC -55 to 150oC

    Rated Power 63 mW 80 mW 100 mW 100 mW 175 mW


    (@70oC free air)

    Max working volts 50VDC 50VDC 50VDC 50VDC 150 VDC

    Resistance range* 10Ω to 2KΩ 10Ω to 2KΩ 10Ω to 2KΩ 10Ω to 2KΩ 10Ω to 2KΩ

    Tolerance ±5% ±5%, 2%, 1% ±5%, 2%, 1% ±5%, 2%, 1% ±5%, 2%, 1%

    TCR (ppm/oC) ± 100 ± 100 ± 100 ± 100 ± 100

    Frequency range** ≤ 40 GHz ≤ 36 GHz ≤ 26.5 GHz ≤ 15 GHz ≤ 8 GHz

    * Other values available. Please contact factory.


    ** Frequency range in an impedance matched system.

    Ordering Information
    ([DPSOHŸP:SDUWLDOZUDSUHVLVWRU

    RC3 - 0502PW -1000 J


    Tolerances:
    Terminal Material F - 1%
    G - 2%
    3 PtAg J - 5%
    4 PtAu†
    8 PtAg (Ultra Leach Resistant) Resistance Value:
    C PtAg with 62/36/2 tin The first three digits are significant
    lead silver solder coating values. The fourth is the number of
    H PtAg with 62/36/2 tin zeros following. The R indicates a
    lead silver solder coating decimal point when resistance value
    (Ultra Leach Resistant) LVOHVVWKDQŸ)RUDMXPSHUXVH
    D PtAu with 62/36/2 code JUMPR.
    solder coating†
    P PtAg with 96/4 tin silver Size:
    solder coating
    0302PW 0502PW 0805PW
    R PtAg with 96/4 tin silver 0402PW 0603PW 50 Schoolhouse Lane
    solder coating (Ultra Leach Portsmouth, RI 02871
    Resistant) Indicates RoHS Compliance Tel (401) 683-9700
    Q PtAu with 96/4 tin silver † 0302(SG) and 0402(SG) only
    Fax (401) 683-5571
    solder coating† e-mail: ims@ims-resistors.com
    http://www.ims-resistors.com

    PW ver.8 03/13 Specifications subject to change without notice.

    You might also like