Communications Systems | LBB 1990/00 Plena Voice Alarm Controller

LBB 1990/00 Plena Voice Alarm Controller

www.boschsecurity.com

u Heart of the Plena Voice Alarm System

u EN 54‑16 certified and EN 60849 compliant

u Message manager and 240 W amplifier build‑in

u Six‑zone outputs

u 12 business and emergency control inputs

The Plena Voice Alarm Controller unit is the heart of loudspeakers. The system is configured using DIP
the voice alarm system. It is the basis of the Plena switches for basic functionality and a PC for more
Voice Alarm System, and has all the essential advanced functions.
functionality for compliance with the EN 54‑16 and
EN 60849 standards, including full system supervision, Functions
loudspeaker line impedance supervision, a supervised
The controller has two BGM source inputs and a mic/
emergency microphone on the front panel and a
line input with configurable priority, speech filter,
supervised message manager.
phantom power and selectable VOX activation. A total
of 16 priority levels can be specified for microphone,
The messages can be merged to allow even more call stations and trigger inputs for optimum system
flexible use of pre-recorded announcements and flexibility.
evacuation messages. The controller can be used as a
stand-alone system with up to six zones, or expanded
The powerful 240 W output section has six
to up to 120 zones using additional six-zone routers.
transformer-isolated 100 V constant-voltage outputs
Up to eight call stations can be connected.
for driving 100 V loudspeakers in six separate zones.
Interconnections are made using standard RJ45
The 100 V-technique reduces line losses on longer
connectors and shielded CAT-5 cable.
distances and provides easy parallel connection of
multiple loudspeakers. All zones may be individually
A built-in 240 W amplifier provides the power for the selected from the front panel, and the BGM output
emergency call channel and BGM. Additional Plena level in each zone can be individually set in six steps.
Amplifiers can be added to provide two-channel The controller supports A/B wiring.
operation. All amplifiers are supervised. The audio
output uses standard analog audio 100 V line
switching for full compatibility with the Plena family of
public address equipment and Bosch EVAC-compliant
2 | LBB 1990/00 Plena Voice Alarm Controller

• Power switch
Configuration software is provided on the CD included • Power cord socket
with the unit. The CD also includes many useful • Mic/line level switch
programs, such as MP3-ripping software, a sample- • Three DIP switches for VOX, speech, phantom power
rate converter, various audio and visual tools, and free, • Microphone volume control knob
MP3-coded music. • Digital message volume control screw
• Monitoring speaker volume control knob

The amplifier output is also available as a separate Interconnections

output on 100 V and 70 V. A separate 100 V call-only Front
output provides addressing for an area where BGM is • Microphone socket
not required but where priority announcements are. Back
Six configurable volume-override output contacts are • 12 loudspeaker outputs
available for overriding local volume controls during • External amplifier input
• Amplifier output (on 100 V)
priority calls. Both four-wire and three-wire schemes
• Backup power input
are supported. An LED meter monitors the output.
• Call output
• Six volume override outputs
Up to 255 messages can be stored in the internal • Three status outputs
16 MB flash ROM, without a need for battery backup. • 12 trigger inputs
Each message can have any length within the total • 24 VDC output
available capacity. Messages and configurations are • Two call station connectors (redundant)
uploaded from a PC via USB 2 into the memory, after • USB 2 connector
which the unit operates without a PC connection. The • Two DE-9 connectors (reserved)
standard WAV-format is used for the messages, and • External amplifier output
• Line output connectors
sample rates of 8 kHz up to 24 kHz with 16-bit word
• Two BGM inputs
length (linear PCM) are supported. This gives up to 17
• PC call station input (reserved)
minutes of recording time with CD-quality signal-to-
• Two RC station connectors (redundant)
noise ratio. • Connector to LBB 1992/00 (router)

The unit has 12 contact trigger inputs for business and Certifications and approvals
emergency (EMG) calls. Each can be configured for a
Safety acc. to EN 60065
message consisting of a sequence of up to eight wave
files. In this way some wave files may be used in Immunity acc. to EN 50130-4
various combinations with other messages, optimizing
flexibility and the amount of storage space used . Emission acc. to EN 55103-1
Multiple messages can be merged to form one Emergency acc. to EN 54‑16 / EN 60849 (2.13.04)
integrated message. A zone selection, together with
this sequence can be configured for each trigger input. Region Certification
Controls and indicators Europe CE Declaration of Conformity
Front
• LED power meter CPD
• 13 system fault LEDs
Poland CNBOP
• Two fault state buttons
• Two emergency state buttons
• Six EMG zone status LED pairs
Installation/configuration notes
• Six EMG zone select buttons
• Six BGM zone select LEDs
• Six BGM zone select buttons
• Six BGM zone volume control knobs
• Two BGM source status LEDs
• Three knobs for BGM volume, treble, and bass levels
• All-call button
• Indicator test button
• EMG state button
• Alert message button
Back
• Three service settings DIP switches
• Calibration switch
• Four system configuration DIP switches LBB 1990/00 rear view
• Mains voltage selector
3 | LBB 1990/00 Plena Voice Alarm Controller

Parts included Limiter Automatic

Quantit Component Line input (BGM and PC call station)

y
Connector Cinch, stereo converted to mono,
1 LBB 1990/00 Plena Voice Alarm Controller unbalanced

1 Power cord Sensitivity 200 mV

1 Set of 19” mounting brackets Impedance 22 kohm

1 Plena VAS CD S/N (flat at max volume) >70 dB

1 Installation and User Instructions S/N (flat at min volume/ >75 dB
muted)
1 USB cable
Headroom >25 dB
Technical specifications
Trigger Inputs 12 x (6 EMG, 6 business)
Electrical
Connectors MC1,5 / 14-ST-3,5
Mains power supply
Activation Programmable
Voltage 230/115VAC, ±15%, 50/60 Hz
Supervision On EMG inputs, programmable
Current inrush 8A
Supervision method Series / parallel resistor
Max power consumption 600 VA
100 V input
Battery power supply
Connector MSTB 2,5 /16-ST
Voltage 24 VDC, +15% / -15%
Power handling capacity 1000 W
Current max 14 A
Tape output 1x
Performance
Connector Cinch, 2 x mono
Output power (rms/maximum) 240 W / 360 W
Nominal level 350 mV
Power reduction on backup -1 dB
Impedance <1 kohm
power
Loudspeaker outputs
Frequency response 60 Hz to 18 kHz (+1/-3 dB at -10 dB
ref. rated output) Connectors MSTB 2,5 /16-ST, floating
Distortion <1% at rated output power, 1 kHz 100 V output 700 W rated per zone
Bass control -8/+8 dB at 100 Hz Volume override types 3-wire, 4-wire (24 V), 4-wire failsafe
Treble control -8/+8 dB at 10 kHz BGM zone output 70 / 50 /35 /25 / 18 / 13 V for
Attenuation 0 / -3 / -6 / -9 / -12 / -15 dB
Mic/line input 1x
120 / 60 / 30 / 15 / 8 /4 W
Connector XLR, 6.3 mm jack
Output Contacts
Sensitivity 1 mV (mic), 1 V (line)
Connector Type MC 1,5/14-ST-3,5
Impedance >1 kohm (mic); >5 kohm (line)
Rating 250 V, 7A, voltage free
S/N (flat at max volume) >63 dB (mic); >70 dB (line)
Emergency active relay NO / COM / NC
S/N (flat at min volme/muted) >75 dB
Call active relay NO / COM / NC
CMRR >40 dB (50 Hz – 20 kHz)
Fault relay NO / COM / NC normally energized
Headroom >25 dB (failsafe)

Speech filter -3 dB at 315 Hz, high-pass, General purpose relays NO / COM

6 dB/oct
Power consumption
Phantom power supply 12 V (mic mode only)
Mains operation
VOX trigger level -20 dB (100 µV mic / 100 mV line)
or via input contact Max power 550 W
4 | LBB 1990/00 Plena Voice Alarm Controller

-3dB 440 W Environmental

-6dB 340 W Operating temperature -10 ºC to +55 ºC (14 ºF to +131 ºF)

Pilot tone* 136 W Storage temperature -40 ºC to +70 ºC (-40 ºF to

+158 ºF)
Idle 60 W
Relative humidity <95%
24 VDC operation
Acoustic noise level of fan <48 dB SPL at 1 m (max output)
Max power 14.0 A (336 W)
Ordering information
-3 dB 12.5 A (300 W)

-6 dB 9.5 A (228 W) LBB 1990/00 Plena Voice Alarm Controller

fully supervised main control unit for Voice Alarm
Pilot tone* 2.5 A (60 W) applications. Built-in 240 W amplifier.
Order number LBB1990/00
Idle 0.9 A (22 W)
Accessories
* 20 kHz -20dB with maximum loudspeaker load
PLN‑VASLB‑NL Plena VAS labels, Dutch (10 pcs)
Messages
Dutch, set of 10 pieces, and can be placed on the
Data format WAV-file, 16-bit PCM, mono front panel
Order number PLN-VASLB-NL
Supported sample rates (fs) 24 / 22.05 / 16 / 12 / 11.025 /
8 kHz PLN‑VASLB‑DE Plena VAS labels, German (10 pcs)
German, set of 10 pieces, and can be placed on the
Frequency response
front panel
at fs=24kHz 100 Hz to 11 kHz (+1/-3 dB) Order number PLN-VASLB-DE

at fs=22.05kHz 100 Hz to 10 kHz (+1/-3 dB ) PLN‑VASLB‑FR Plena VAS labels, French (10 pcs)
French, set of 10 pieces, and can be placed on the
at fs=16kHz 100 Hz to 7.3 kHz (+1/-3 dB )
front panel
at fs=12kHz 100 Hz to 5.5 kHz (+1/-3 dB) Order number PLN-VASLB-FR

at fs=11.025kHz 100 Hz to 5 kHz (+1/-3 dB) PLN‑VASLB‑SE Plena VAS labels, Swedish (10 pcs)
Swedish, set of 10 pieces, and can be placed on the
at fs=8kHz 100 Hz to 3.6 kHz (+1/-3 dB)
front panel
Distortion <0.1% at 1 kHz Order number PLN-VASLB-SE

S/N (flat at max volume) >80 dB PLN‑VASLB‑PL Plena VAS labels, Polish (10 pcs)
Polish, set of 10 pieces, and can be placed on the
Memory capacity 16 MB Flash ROM
front panel
Recording / playback time 1000 seconds at fs = 8 kHz Order number PLN-VASLB-PL
333 seconds at fs = 24 kHz

Number of messages 255 max

Supervision Flash ROM Continuous checksum control

Supervision DAC 1 Hz pilot tone

Data retention time >10 years

Mechanical

Dimensions (H x W x D) 144 x 430 x 370 mm

(19" wide, 3U high)

Weight Approx. 21.17 kg

Mounting 19”rack

Color Charcoal
 5 | LBB 1990/00 Plena Voice Alarm Controller

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc. Bosch Security Systems B.V. Robert Bosch (SEA) Pte Ltd, Security Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
12000 Portland Avenue South P.O. Box 80002 Systems 201 Building, No. 333 Fuquan Road Via Anhanguera, Km 98
Burnsville MN 55337, USA 5617 BA Eindhoven, The Netherlands 11 Bishan Street 21 North IBP CEP 13065-900
Phone: +1-800-392-3497 Phone: + 31 40 2577 284 Singapore 573943 Changning District, Shanghai Campinas, Sao Paulo, Brazil
Fax: +1-800-955-6831 Fax: +31 40 2577 330 Phone: +65 6571 2808 200335 China Phone: +55 19 2103 2860
audiosupport@us.bosch.com emea.securitysystems@bosch.com Fax: +65 6571 2699 Phone +86 21 22181111 Fax: +55 19 2103 2862
www.boschsecurity.com www.boschsecurity.com apr.securitysystems@bosch.com Fax: +86 21 22182398 al.securitysystems@bosch.com
www.boschsecurity.asia www.boschsecurity.com.cn www.boschsecurity.com

© Bosch Security Systems 2012 | Data subject to change without notice

1892775819 | en, V2, 24. Nov 2012