Bomba A/Ceb. Au 10: Dimensioning and Tolerancing PER ASME Y14.5M-1994
Bomba A/Ceb. Au 10: Dimensioning and Tolerancing PER ASME Y14.5M-1994
Bomba A/Ceb. Au 10: Dimensioning and Tolerancing PER ASME Y14.5M-1994
[414.34 mm]
16.313 in
[38.10 mm]
1.500 in
[912.81 mm]
3.078 in
[78.18 mm]
35.938 in
E E
[745.54 mm]
29.352 in
[489.19 mm]
[498.48 mm]
19.259 in
19.625 in
D D
20.000 in 14.732 in
[508.00 mm] [374.19 mm] 0.800 in
37.983 in [20.31 mm]
[304.80 mm]
27.312 in
[964.76 mm]
[693.72 mm]
12.000 in
26.984 in 10.000 in
[685.38 mm] [254.00 mm]
C C
[431.80 mm]
[361.95 mm]
17.000 in
14.250 in
0.750 in
[19.05 mm]
12.925 in
[328.30 mm]
B B
UNLESS OTHERWISE SPECIFIED DRAWN BY DATE MATERIAL WEIGHT
DIMENSIONING AND TOLERANCING
PER ASME Y14.5M-1994 DIMENSIONS ARE IN MILIMETERS Eggui Cort s 23/10/2010 N/A
TOLERANCES ANGLES
DECIMALS DRAWING TITLE PUMP TYPE:
X 1. X 1.0 BOMBA A/CEB. AU 10
.X 0.1 XX 0.5
REV. RELEASED BY DATE APROVED BY DRAWING NO.
.XX 0.01 XXX 0.25 NOTICE/AVISO
THIS MATERIAL IS THE PROPERTY OF WDM PUMPS INC. AND
IS FURNISHED FOR THE PURPOSE INDICATED.
ANY AND ALL CONFIDENTIAL, PROPRIETARY, PATENT AND
OTHER RIGHTS. IN THE SUBJECT MATTER BEING RETAINED
.XXX 0.001
125
2
1 Eggui Cort s 27/11/2014 Andr s Mu oz AU 10
CASTING REFERENCE:
INCLUDING ANY EXCLUSIVE RIGHTS OF USE AND/OR
MANUFACTURE AND/OR SALE, POSSESSION OF THIS
MATERIAL DOES NOT CONVEY ANY PERMISSION TO
DRILLED HOLES FINISH AS DRILLED
COUNTERSINK 82 X 1.5/2.5 DEEP.
CHAMFER ALL THREADED HOLES WITH AN 82
1D0024
REPRODUCE THIS MATERIAL, IN WHOLE OR IN PART, OR SCALE
MANUFACTURE THE SUBJECT MATTER SHOWN THEREIN, OR COUNTERSINK TO THE MAJOR THREAD DIA. -0.0/+1.0
USE THE CONFIDENTIAL OR PROPRIETARY INFORMATION BREAK ALL CORNERS & SHARP EDGES 0.2/0.5 RADIUS
THEREON, SUCH PERMISSION TO BE GRANTED ONLY BY ALL FILLETS 0.3/0.5 R SIZE: SHEET/SHEETS
A SPECIFIC AUTHORIZATION IN WRITING SIGNED BY A SCREW THREAD STANDARDS PER FED-STD-H2B. A4 1 /1 A
OFFICER OR OTHER AUTHORIZED AGENT OF WDM PUMPS PERFECT ORIENTATION OR LOCATION AT MMC PARENT.
INC. ITS DIVISIONS OR SUBSIDIARIES. REQUIRED FOR RELATED FEATURES.
Z:\INGENIERIA DE PRODUCTO\PLANOS BARNES\Planos en Inventor\ENSAMBLE DE BOMBAS\AE-AG\AU 10.iam
8 7 6 5 4 3 2 1