Amplifier Monitoring: Features - Technical Specifications
Amplifier Monitoring: Features - Technical Specifications
Amplifier Monitoring: Features - Technical Specifications
AMPLIFIER MONITORING
6 inputs for 70 / 100V line amplifier outputs Operating voltage 24V DC via PS9400 PSU
Dual mode monitoring with continuous signal indicator Power consumption 50 mW
Audio monitoring with volume control Amplifier inputs 6 : 70 / 100V line
Monitoring mode Audio : 1W speaker with 5 presets
Visual : 9 segment LED level meter
LED for all channels
Dimensions (WxHxD) 482 x 88 x 180 mm
Weight 2.95 kg
Rear View
DC SUPPLY AMPLIFIER INPUTS
Packing information
24V,1A AMP 1 AMP 2 AMP 3 AMP 4 AMP 5 AMP 6
AMP IN - FROM AMPLIFIER OUTPUT
COM
COM
COM
COM
COM
COM
100V
100V
100V
100V
100V
+ -
AM 6000
AMP IN 1
Weight : 3.7 kg
Qty : 1 units / carton
CAUTION : PLEASE OBSERVE POLARITY AMP 6
Interval Pilot Tone injection ; reduces strain to amplifiers Operating voltage 24V DC via PS9400 PSU
Works independently with or without availability of audio signal Power consumption 200 mW nominal
Low distortion to original audio signal Input impedance 10 K balanced
Status monitoring via LED ; Pilot Tone and amplifier fault Output impedance 600 Ohm balanced
Compatible with most 70 / 100V line amplifiers in the market Max audio input 0.75V
Max audio output 1.2V
Transmit interval 10 seconds
Detection delay 20 seconds
APPLICATION SCHEMATIC -
Please refer to schematic in AX700 ; “Application with AS4000 Recovery time 30 seconds
amplifier surveillance module” Frequency response 20 - 20 KHz
Detection output NO and NC dry contact
Dimensions (WxHxD) 120 x 96 x 28 mm
Weight 331 gms
PAGE 20 |