Insulation Example
Insulation Example
Insulation Example
Coatings Sample
se
U
al
ci
PIP INIH1000
er
Hot Insulation Installation Details
m
om
rC
fo
ot
-N
e
pl
m
Sa
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
In an effort to minimize the cost of process industry facilities, this Practice has
been prepared from the technical requirements in the existing standards of major industrial
users, contractors, or standards organizations. By harmonizing these technical requirements
se
into a single set of Practices, administrative, application, and engineering costs to both the
purchaser and the manufacturer should be reduced. While this Practice is expected to
U
incorporate the majority of requirements of most users, individual applications may
involve requirements that will be appended to and take precedence over this Practice.
Determinations concerning fitness for purpose and particular matters or application of the
al
Practice to particular project or engineering situations should not be made solely on
ci
information contained in these materials. The use of trade names from time to time should
not be viewed as an expression of preference but rather recognized as normal usage in the
er
trade. Other brands having the same specifications are equally correct and may be
substituted for those named. All Practices or guidelines are intended to be consistent with
m
applicable laws and regulations including OSHA requirements. To the extent these
Practices or guidelines should conflict with OSHA or other applicable laws or regulations,
om
such laws or regulations must be followed. Consult an appropriate professional before
applying or acting on any material contained in or suggested by the Practice.
rC
© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas
at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies
ot
and Subscribers may copy this Practice for their internal use. Changes or modifications of any
kind are not permitted within any PIP Practice without the express written authorization of
-N
PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or
exceptions to specific sections of PIP Practices. Authorized Users may provide their clients,
suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes.
These purposes include but are not limited to the procurement process (e.g., as attachments to
e
requests for quotation/ purchase orders or requests for proposals/contracts) and preparation
pl
and issue of design engineering deliverables for use on a specific project by Authorized
User’s client. PIP’s copyright notices must be clearly indicated and unequivocally
m
incorporated in documents where an Authorized User desires to provide any third party with
copies of the Practice.
Sa
Note (added February 2002): PIP INIH1000, Hot Insulation Installation Details, may incorporate
drawings and other information previously published in standards owned and copyrighted by the Midwest
Insulation Contractors Association (MICA). These are printed with the express permission of MICA.
PRINTING HISTORY
October 1997 Issued September 2005 Technical Revision September 2012 Reaffirmation with Editorial Revision
February 2002 Editorial Revision October 2007 Editorial Revision
Coatings
se
U
al
ci
PIP INIH1000
er
Hot Insulation Installation Details
m
Table of Contents om
1. Introduction .................................2
1.1 Purpose ............................................2
rC
1.2 Scope................................................2
2. References ..................................2
Industry Codes and Standards .................2
fo
Details
ot
INIH0003 Piping - Vertical Insulation Support INIH0051 Vertical Vessels with Outside
Single Layer Diameters 900 (36”) and Less
INIH0004 Piping - Vertical Insulation Support INIH0052 Vessel Composite Type 1
Multi-Layer INIH0053 Vessel Composite Type 2
e
INIH0013 Spacer Blocks for Typical Tracer INIH0061 Head Lap Seam Details
Arrangements INIH0062 Horizontal Vessels
INIH0064 Horizontal Heat Exchangers
1. Introduction
1.1 Purpose
This Practice provides installation details for hot insulation systems.
1.2 Scope
se
This practice provides details for installing hot insulation systems on piping, valves,
horizontal and vertical vessels, and heat exchangers.
U
2. References
al
Applicable parts of the following industry codes and standards shall be considered an integral
ci
part of this Practice. The edition in effect on the date of contract award shall be used, except as
otherwise noted. Short titles will be used herein where appropriate.
er
Industry Codes and Standards
m
• American Society for Testing and Materials (ASTM)
om
ASTM C-450 – Standard Practice for Prefabrication and Field Fabrication of
Thermal Insulating Fitting Covers for NPS Piping, Vessel Lagging, and Dished
Head Segments
rC
fo
ot
-N
e
pl
m
Sa