Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 854 views

    Subaru 4EAT

    Uploaded by

    Guilherme Zoboli
    This document provides information for testing the solenoids and sensors of a Subaru 4-speed automatic transmission (4EAT). It lists the specifications for each solenoid, including the output channel, current draw, and resistance ranges. Testing procedures are outlined for the transmission temperature sensor and vehicle speed sensor. A wiring chart identifies the harness connections between the transmission connector and diagnostic tool.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Subaru 4EAT

    Uploaded by

    Guilherme Zoboli
    854 views2 pages
    This document provides information for testing the solenoids and sensors of a Subaru 4-speed automatic transmission (4EAT). It lists the specifications for each solenoid, including the output channel, current draw, and resistance ranges. Testing procedures are outlined for the transmission temperature sensor and vehicle speed sensor. A wiring chart identifies the harness connections between the transmission connector and diagnostic tool.

    Original Description:

    subaru

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information for testing the solenoids and sensors of a Subaru 4-speed automatic transmission (4EAT). It lists the specifications for each solenoid, including the output channel, current draw, and resistance ranges. Testing procedures are outlined for the transmission temperature sensor and vehicle speed sensor. A wiring chart identifies the harness connections between the transmission connector and diagnostic tool.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    854 views2 pages

    Subaru 4EAT

    Uploaded by

    Guilherme Zoboli
    This document provides information for testing the solenoids and sensors of a Subaru 4-speed automatic transmission (4EAT). It lists the specifications for each solenoid, including the output channel, current draw, and resistance ranges. Testing procedures are outlined for the transmission temperature sensor and vehicle speed sensor. A wiring chart identifies the harness connections between the transmission connector and diagnostic tool.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Transmission: Subaru 4 Speed (4EAT) Transmission Code: 127

    Dedicated Harness Set: 16X201

    SOLENOID TEST: (Engine off)


    Solenoid TranX Output Current Resistance
    Setting Channel Cold-Hot Cold-Hot
    Shift Gear 1 1 0.7 - 0.4 18 - 33 Ω
    Solenoid A

    Shift Gear 2 2 0.7 - 0.4 18 - 33 Ω


    Solenoid B IMPORTANT
    Lock-Up Gear 5 5 0.2 - 0.1 10 - 16 Ω
    select duty (@ 20% duty) 4WD Solenoid must be
    turned on when testing
    4WD Gear 6 6 1.3 - 0.8 9 - 16 Ω
    all wheel drive vehicles.
    EPC Solenoid Gear 7 7 2.5 - 1.0 2.3 - 5.5 Ω
    If not, the transfer case
    select duty (@ 50% duty) will bind on turns.
    Overrun Gear 8 8 0.7 - 0.4 18 - 33 Ω
    Clutch

    CAUTION:
    Always come to a COMPLETE STOP &
    TURN ENGINE OFF before changing test modes

    SHIFT/MONITOR TEST
    Shift Shift Overrun Clutch Lock-Up 4WD EPC
    GEAR Solenoid A Solenoid B (Function 1) (pulsed) (Function 3) Solenoid
    (pulsed)
    1st ON ON ON/OFF OFF ON/OFF Select Duty

    2nd OFF ON ON/OFF ON/OFF ON/OFF Select Duty

    3rd OFF OFF ON/OFF ON/OFF ON/OFF Select Duty

    4th ON OFF ON/OFF ON/OFF ON/OFF Select Duty

    Notes:
    ♦ Overrun Clutch provides engine braking in lower gears when off. It is always on in 4th gear.
    ♦ Lock Up is normally activated in 3rd and 4th Gears.
    ♦ See other side for connector diagram.
    ♦ Polarity = Common Negative

    TranX 2000 Manual Asian: Page 23


    Transmission: Subaru 4 Speed (4EAT)
    CONNECTOR: TOT Sensor Test COMMENTS :
    The Temperature Sensor is a thermistor,
    (Looking into harness connector) Connect Multimeter to Sensor
    which changes resistance in relation to the
    Module Test Points 5 & 6 temperature of the transmission fluid.
    As fluid temperature increases, thermistor
    Resistance Temperature resistance decreases.
    4 3 2 1
    2100 - 2900 Ω 68° F
    8 7 6 5 275 - 375 Ω 176° F

    12 11 10 9 Vehicle Speed Sensor Test COMMENTS :


    The Speed Sensor is Inductive - Dynamic
    16 15 14 13 Connect Multimeter to Sensor tests can be made using a Multimeter meas-
    Module Test Points 7 & 8 uring either Voltage AC or Frequency AC
    An AC Voltage and frequency will be
    Resistance Comments produced by the sensor, informing the
    450 - 650Ω Ignition Off transmission ECU the output speed.

    Wiring Chart
    Case Connector TranX 2000 Vehicle Function TranX 2000 TranX 2000
    Pin Number Harness Wire Output Location 25 Way Pin
    1 Black/Red Stripe Ground 11

    2 Blue Shift Solenoid 3 Channel 1 7

    3 Green Shift Solenoid 2 Channel 2 8

    4 Gray Overrun Solenoid Channel 4 2

    5 Black Ground 10

    6 Yellow EPC Channel 7 1

    7 Purple Lockup Solenoid Channel 6 3

    8 Red/Blue Stripe Temperature Sensor Sensor 5 Test Point 19

    9 White/Red Stripe Temperature Sensor Sensor 6 Test Point 20

    10 Brown 4WD Channel 5 4

    12& 15 White/Green Stripe Vehicle Speed Sensor Sensor 7 Test Point 21

    13 & 14 White/Purple Stripe Vehicle Speed Sensor Sensor 8 Test Point 22

    TranX 2000 Manual Asian: Page 24

    You might also like