Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
163 views

Structural Specifications: A. General Notes

The document provides structural specifications for a building project, including general notes, concrete specifications, reinforcement details, structural steel specifications, and formwork and curing time requirements. It specifies minimum concrete compressive strengths, clear concrete cover dimensions for reinforcing bars, maximum aggregate sizes for different structural elements, reinforcement bar sizes and grades, structural steel specifications, splicing details for reinforcement bars, and camber requirements.

Uploaded by

Alex Ander
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
163 views

Structural Specifications: A. General Notes

The document provides structural specifications for a building project, including general notes, concrete specifications, reinforcement details, structural steel specifications, and formwork and curing time requirements. It specifies minimum concrete compressive strengths, clear concrete cover dimensions for reinforcing bars, maximum aggregate sizes for different structural elements, reinforcement bar sizes and grades, structural steel specifications, splicing details for reinforcement bars, and camber requirements.

Uploaded by

Alex Ander
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

STRUCTURAL SPECIFICATIONS

A. GENERAL NOTES

1. In the interpretation of these drawings, indicated dimensions shall govern distances or


sizes shall not be scaled for construction purposes.
2. In case of conflict in details or dimensions between the architectural and engineering
drawings, refer to the architect for final decision.
3. In case of conflict between these drawings and specifications, the working drawing shall
govern.
4. All structural details unless otherwise shown in the drawings shall follow construction
note details.
5. All concrete work shall be done in accordance with the ACI-318-71 code in so far as
they do not conflict with local building code requirements.
6. Contractor shall coordinate with the architect, mechanical, electrical and structural
engineer plans as to the exact size and location of openings thru floor slab beams and
walls.

B. CONCRETE

*Minimum concrete strength at 28 days compressive test shall as follows*


1. Columns -----------------------------------------------------------------------fc' = 20.68 MPa (3000 psi)
2. Footing the beams, retaining walls, footing---------------------------fc' = 20.68 MPa (3000 psi)
3. Suspended slabs, beams and girders----------------------------------fc' = 20.68 MPa (3000 psi)
@ initial stressing--------------------------------------------------------------fc' = 20.68 MPa (3000 psi)
4. Elevator core & stairwell wall---------------------------------------------fc' = 20.68 MPa (3000 psi)
5. Slab on Grade----------------------------------------------------------------fc' = 20.68 MPa (2500 psi)
6. Other not specified----------------------------------------------------------fc' = 20.68 MPa (3000 psi)

Concrete shall be deposited in its final position without segregation, re handling or flowing. Placing
shall be done preferably with buggies, buckets or wheelbarrows. No chutes will be allowed except to
transfer concrete from hoppers to buggies, wheelbarrows or buckets in which case they shall not
exceeded six (6.00) meters in aggregate length.

No depositing of concrete shall be allowed without the use of vibrators unless authorized in writing by
the designers and only for unusual conditions where vibrations is extremely difficult to accomplish.

Without preliminary test data, the water cement ratio for a given strength of concrete should not
exceed the values shown in the 2 ACI Code, when strength in excess of 211.0 kg/cm (3KSI) are
required, strength test should be made.

C. CONCRETE PROTECTION FOR REINFORCING BARS

*The following shall be the clear cover concrete protections:

FOUNDATION----------------------------------------------------0.08 m
SLAB ON GRADE-----------------------------------------------0.04 m
SURFACE TO WEATHER-------------------------------------0.05 m
COLUMNS---------------------------------------------------------0.04 m
BEAMS AND GIRDERS----------------------------------------0.04 m
SUSPENDED SLABS AND STAIR--------------------------0.02 m
WALLS--------------------------------------------------------------0.02 m
D. SIZE OF AGGREGATES TO BE USED

Maximum sizes of aggregates to be used for various type of concrete construction:

MINIMUM REINFORCED UNREINFORCED HEAVILY LIGHT


DIMENSION CONC. WALLS, WALLS REINFORCED REINFORCED OR
OF BEAMS & SLABS UNREINFORCED
SECTION COLUMNS SLABS
63mm to 250mm 12mm to 20mm 20mm 20mm to 25mm 20mm to 38mm
150mm to 280mm 20mm to 38mm 38mm 38mm 38mm to 75mm
305mm to 740mm 38mm to 75mm 75mm 38mm to 75mm 75mm
760mm or MORE 38mm to 75mm 150mm 38mm to 75mm 75mm to 150mm

E. REINFORCING BARS

1. All reinforcing bars shall be deformed billet steel bars in accordance with ASTMA615.

2. 16 mm 0 rebars & larger shall be deformed intermediate grade----------------------fy =


275.73 MPa ( 40,000 psi)

3. 12 mm 0 rebars & smaller shall be deformed structural grade-------------------------fy =


227.48 MPa (33,000 psi)

4. All column vertical bars including elevator and stairwell cores shall be deformed grade
40----- fy= 275.73 MPa (40,000 psi)

F. STRUCTURAL STEEL

1. All structural steel both angles and steel plates shall conform to ASTM A 36---------fy =
248.16 MPa (36,000 psi)

2. Welding electrodes shall be E70 XX Series.

3. Machine and anchor bolts shall conform to ASTM A 325.

G. STRUCTURAL STEEL

1. For beams: All splices shall be lapped or extend a minimum of 40 diameter unless
shown otherwise, horizontal bars splices location shall be staggered for beams and girders.
Splice top bars at mid span, bottom bars and supports.

2. For columns: All splices shall be welded or lapped located near the mid height level.
No more than 50°/o of the total number of main bars shall be spliced at any same level
location.

-COLUMN SPLICE DETAIL


H. CUT-OFF BARS

Unless otherwise shown on structural drawings, typical bar cut-off for beams, girders and
slabs shown below shall be followed. Hooks may be optional.

TYPICAL FOR BEAMS

I. REBARS AT CORNER SLAB AND SLAB OPENING

Provide extra reinforcement for comer slabs (two adjacent discontinuous edges) as shown
below & at ends & corner of shear walls. CORNER SLAB SHEAR WALL
J. MINIMUM TIME BEFORE REMOVAL OF FORMS AFTER POURING

Walls-----------------------------------------3 Days

Column -------------------------------------3 Days

Beams---------------------------------------After stressing for pre stressed members or 21 days for


non - prestressed members.

Slabs ---------------------------------------After stressing of post - tensioned beams or 21 days for


non - prestressed members.

Undue superimposed dead loads should not be applied during any subsequent curing
period.

K. PIPES AND CONDUITS EMBEDDED WCONCRETE

Unless otherwise shown on drawings or permission of engineering pipes and other


electrical conduits with their fittings shall not displace more than 4% of the cross - sectional
area of the column.

L. CAMBERING

Unless otherwise specified by the engineer or architect camber are to be provided for all
suspended RC members as follows:

BEAMS------------------------------------------------------------------12 mm PER 3.05 m

SLABS-------------------------------------------------------------------12 mm PER 3.05 m

CANTILIVERED BEAMS AND SLABS--------------------------25 mm PER 3.05 m

SLAB DEPRESSION DETAIL

You might also like