DS1307 64 X 8, Serial, I C Real-Time Clock: General Description Benefits and Features

74
DS1307
2
64 x 8, Serial, I C Real-Time Clock
GENERAL DESCRIPTION BENEFITS AND FEATURES

The DS1307 serial real-time clock (RTC) is a low-  Completely Manages All Timekeeping Functions
power, full binary-coded decimal (BCD) clock/calendar o Real-Time Clock Counts Seconds, Minutes,
plus 56 bytes of NV SRAM. Address and data are Hours, Date of the Month, Month, Day of the
2
transferred serially through an I C, bidirectional bus. Week, and Year with Leap-Year
The clock/calendar provides seconds, minutes, hours, Compensation Valid Up to 2100
day, date, month, and year information. The end of o 56-Byte, Battery-Backed, General-Purpose
the month date is automatically adjusted for months RAM with Unlimited Writes
with fewer than 31 days, including corrections for leap o Programmable Square-Wave Output Signal
year. The clock operates in either the 24-hour or 12-  Simple Serial Port Interfaces to Most
hour format with AM/PM indicator. The DS1307 has a Microcontrollers
built-in power-sense circuit that detects power failures 2
o I C Serial Interface
and automatically switches to the backup supply.
Timekeeping operation continues while the part  Low Power Operation Extends Battery Backup
operates from the backup supply. Run Time
o Consumes Less than 500nA in Battery-
TYPICAL OPERATING CIRCUIT Backup Mode with Oscillator Running
VCC o Automatic Power-Fail Detect and Switch
VCC Circuitry
VCC RPU
CRYSTAL  8-Pin DIP and 8-Pin SO Minimizes Required
RPU
Space
X1 X2 VCC  Optional Industrial Temperature Range: -40°C to

SCL SQW/OUT +85°C Supports Operation in a Wide Range of
CPU
Applications
DS1307
 Underwriters Laboratories® (UL) Recognized
SDA VBAT
GND
RPU = tr/Cb
PIN CONFIGURATIONS
TOP VLEW
X1 VCC X1 VCC
X2 SQW/OUT X2 SQW/OUT
VBAT SCL VBAT SCL
GND SDA GND SDA
SO (150 mils) PDIP (300 mils)
ORDERING INFORMATION
PART TEMP RANGE VOLTAGE (V) PIN-PACKAGE TOP MARK*
DS1307+ 0°C to +70°C 5.0 8 PDIP (300 mils) DS1307
DS1307N+ -40°C to +85°C 5.0 8 PDIP (300 mils) DS1307N
DS1307Z+ 0°C to +70°C 5.0 8 SO (150 mils) DS1307
DS1307ZN+ -40°C to +85°C 5.0 8 SO (150 mils) DS1307N
DS1307Z+T&R 0°C to +70°C 5.0 8 SO (150 mils) Tape and Reel DS1307
DS1307ZN+T&R -40°C to +85°C 5.0 8 SO (150 mils) Tape and Reel DS1307N
+Denotes a lead-free/RoHS-compliant package.
*A “+” anywhere on the top mark indicates a lead-free package. An “N” anywhere on the top mark indicates an industrial temperature range device.
Underwriters Laboratories, Inc. is a registered certification mark of Underwriters Laboratories, Inc.
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Pin Relative to Ground ....................................................................................-0.5V to +7.0V
Operating Temperature Range (Noncondensing)
Commercial................................................................................................................................ 0°C to +70°C
Industrial ..................................................................................................................................-40°C to +85°C
Storage Temperature Range ............................................................................................................. -55°C to +125°C
Soldering Temperature (DIP, leads) ........................................................................................+260°C for 10 seconds
Soldering Temperature (surface mount)…..……………………….Refer to the JPC/JEDEC J-STD-020 Specification.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is
not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability.
RECOMMENDED DC OPERATING CONDITIONS

(TA = 0°C to +70°C, TA = -40°C to +85°C.) (Notes 1, 2)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage VCC 4.5 5.0 5.5 V
Logic 1 Input VIH 2.2 VCC + 0.3 V
Logic 0 Input VIL -0.3 +0.8 V
VBAT Battery Voltage VBAT 2.0 3 3.5 V
DC ELECTRICAL CHARACTERISTICS
(VCC = 4.5V to 5.5V; TA = 0°C to +70°C, TA = -40°C to +85°C.) (Notes 1, 2)
Input Leakage (SCL) ILI -1 1 A
I/O Leakage (SDA, SQW/OUT) ILO -1 1 A
Logic 0 Output (IOL = 5mA) VOL 0.4 V
Active Supply Current
ICCA 1.5 mA
(fSCL = 100kHz)
Standby Current ICCS (Note 3) 200 A
VBAT Leakage Current IBATLKG 5 50 nA
1.216 x 1.25 x 1.284 x
Power-Fail Voltage (VBAT = 3.0V) VPF V
VBAT VBAT VBAT
DC ELECTRICAL CHARACTERISTICS
(VCC = 0V, VBAT = 3.0V; TA = 0°C to +70°C, TA = -40°C to +85°C.) (Notes 1, 2)
VBAT Current (OSC ON);
IBAT1 300 500 nA
SQW/OUT OFF
VBAT Current (OSC ON);
IBAT2 480 800 nA
SQW/OUT ON (32kHz)
VBAT Data-Retention Current
IBATDR 10 100 nA
(Oscillator Off)
WARNING: Negative undershoots below -0.3V while the part is in battery-backed mode may cause loss of data.
75

DS1307 64 X 8, Serial, I C Real-Time Clock: General Description Benefits and Features

Uploaded by

Copyright:

Available Formats

DS1307 64 X 8, Serial, I C Real-Time Clock: General Description Benefits and Features

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DS1307 64 X 8, Serial, I C Real-Time Clock: General Description Benefits and Features

Uploaded by

Copyright:

Available Formats

74

GENERAL DESCRIPTION BENEFITS AND FEATURES

X1 X2 VCC  Optional Industrial Temperature Range: -40°C to

RECOMMENDED DC OPERATING CONDITIONS

You might also like