Throughput

Degradation

Check for Outage if

any

Alarms like VSWR, Transport

related Alarms, BFD all group Check Service
down, etc. Impacting Alarms

Check Payload

If Payload < 500

MB in 24 hrs & Yes
radio condition Then low Payload is a
is good
concern.

Check MIMO Usage

Yes check for possible divers

If MIMO
usage is < cable swap in RF modu
25/50 % and Connections issue
MIMO Parameter settin
 Yes check for possible divers
If MIMO
usage is < cable swap in RF modu
25/50 % and Connections issue
MIMO Parameter settin

Check CQI, Rank

If CQI/MCS is poor, it indicates Indicator, MCS
poor RF condition Allocation

Check for Optimization possibilities

if RF condition is poor. Check Overshooting

Check CIO, Overshooting,coverage Check for Poor HOSR

foot print, PCI/RSI with high HO
collision/confusion. Attempts

Check with tranmission team

regarding router table Too many S1
configurations and other issues. Handovers
 Then low Payload is a
concern.

check for possible diversity

cable swap in RF module
and Connections issue,
MIMO Parameter settings.
check for possible diversity
cable swap in RF module
and Connections issue,
MIMO Parameter settings.
 DCR

Check for Outage if

any

Alarms like VSWR, Transport

related Alarms, BFD all group Check Service
down, etc. Impacting Alarms

Check CIO, Overshooting,coverage

foot print, PCI/RSI Poor HOSR with high
collision/confusion. HO Attempts

Check with tranmission team

regarding router table Too many S1
configurations and other issues. Handovers

Check CQI, Rank

If CQI/MCS is poor, it indicates Indicator, MCS
poor RF condition Allocation

Check for Optimization possibilities Check Overshooting

if RF condition is poor.

Check Report RSLTE254 for PCI & Check PCI

other Alarms Confusion/Collision
Check Report RSLTE254 for PCI & Check PCI
other Alarms Confusion/Collision
 HOSR

Identify the Target

Check Report RSLTE031 cells with Poor
HOSR

Alarms like VSWR, Transport Check Service

related Alarms, BFD all group Impacting Alarms in
down, etc. Source & Target
Cells

Check for Outage if

any in target cells

Check Report RSLTE254 for PCI & Check for PCI

other Alarms Collision/Confusion

No

Check for Optimization possibilities Check Overshooting

if RF condition is poor. Check of Source/Target
Report RSLTE058 Cell

Inform Tx and Operations team if X2 link Availability

there is any problem identified. and health check
Inform Tx and Operations team if X2 link Availability
there is any problem identified. and health check

Parameters like CIO, Filter Parameter Tuning in

coefficient, A3/A5 thresholds can special cases
be changed.
 HOSR

Identify the Target

cells with Poor
HOSR

Check Service
Impacting Alarms in
Source & Target
Cells

Check for Outage if

any in target cells

Yes
Check for PCI Need to change PCI of
Collision/Confusion particular cells

Check Overshooting
of Source/Target
Cell

X2 link Availability
and health check
 X2 link Availability
and health check

Parameter Tuning in
special cases
 CSSR

Most Critical Alarm is GTP Alarm,

Alarms like VSWR, Transport related Check Service
Alarms, BFD all group down, etc. also Impacting Alarms
need to be monitored.

In order to identify problem at Segregate success

Radio-Transmisson-Core rate of RRC-S1_C-
ERAB stages.

Is RRC
Success rate

Good

Is S1_C
Success rate

Good

Is ERAB
Success rate
 Is ERAB
Success rate
 CSSR

Check Service
Impacting Alarms

Segregate success
rate of RRC-S1_C-
ERAB stages.

Poor Check Radio conditions

Is RRC like CQI, Power head
Success rate room report, PCI
Collision, RSI Collision,
Overshooting,etc.

Poor
Is S1_C Check for Transport
Success rate Issues

Poor If RRC and S1 succes rate

Is ERAB are good, then ERAB
Success rate issue need to be
escalated to Core team.
 Poor If RRC and S1 succes rate
Is ERAB are good, then ERAB
Success rate issue need to be
escalated to Core team.
 KPI Action Point
Check Service Impacting Alarms
Check for Outage if any
Check Payload
Check MIMO Usage
Throughput Degradation
Check CQI, Rank Indicator, MCS Allocation
Check Overshooting
Poor HOSR with high HO Attempts
Too many S1 Handovers
Check Outage Issues
Check Service Impacting Alarms
Poor HOSR with high HO Attempts
DCR Too many S1 Handovers
Check CQI, Rank Indicator, MCS Allocation
Check Overshooting
Check PCI Confusion/Collision
Identify the Target cells with Poor HOSR
Check Service Impacting Alarms in Source & Target Cells
Check for Outage if any in target cells
Intra Frequency HOSR Check for PCI Collision/Confusion
Check Overshooting of Source/Target Cell
X2 link Availability and health check
Parameter Tuning in special cases
Check Service Impacting Alarms
Segregate success rate of RRC-S1_C-ERAB stages.
E2E CSSR If RRC Success rate is poor
If S1_C Success rate is poor
If ERAB Success rate is poor
 Remarks
Alarms like VSWR, Transport related Alarms, BFD all group down, etc.

If Payload < 500 MB in 24 hrs & radio condition is good. Then low Payload is a concern.
If MIMO usage is < 25/50 % then check for possible diversity cable swap in RF module and Connections issue, MIMO Param
If CQI/MCS is poor, it indicates poor RF condition
Check for Optimization possibilities if RF condition is poor.
Check CIO, Overshooting,coverage foot print, PCI/RSI collision/confusion.
Check with tranmission team regarding router table configurations and other issues.

Alarms like VSWR, Transport related Alarms, BFD all group down, etc.
Check CIO, Overshooting,coverage foot print, PCI/RSI collision/confusion.
Check with tranmission team regarding router table configurations and other issues.
If CQI/MCS is poor, it indicates poor RF condition
Check for Optimization possibilities if RF condition is poor. Check Report RSLTE058
Check Report RSLTE254 for PCI & other Alarms
Check Report RSLTE031
Alarms like VSWR, Transport related Alarms, BFD all group down, etc.

Check Report RSLTE254 for PCI & other Alarms

Check for Optimization possibilities if RF condition is poor. Check Report RSLTE058
Inform Tx and Operations team if there is any problem identified.
Parameters like CIO, Filter coefficient, A3/A5 thresholds can be changed.
Most Critical Alarm is GTP Alarm, Alarms like VSWR, Transport related Alarms, BFD all group down, etc. also need to be mo
In order to identify problem at Radio-Transmisson-Core
Check Radio conditions like CQI, Power head room report, PCI Collision, RSI Collision, Overshooting,etc.
Check for Transport Issues
If RRC or S1 is poor, then no need to work on ERAB. If RRC and S1 succes rate are good, then ERAB issue need to be escalat