Gage Maker Catalog

Product Information
www.gagemaker.com
W e would like to thank you for taking the
time to view our catalog. It contains many new
features and products. We hope this catalog will
provide you with the necessary information to
familiarize yourself with all of our products, as well as,
make it easier to find the best product for you.
This catalog is an example of Gagemaker’s

continued commitment to adapt and improve
not only our product, but the industry as a whole.
Gagemaker’s dynamic innovation and unparalleled
products will continue to push the boundaries of the
thread inspection industry.
We appreciate your business and hope you

continue your patronage with us for all of
your gauging and calibration needs.
Thank you,
The Gagemaker Team
Copyright © 2012 Gagemaker, LP

Gagemaker, LP
P.O. Box 87709, Houston, Texas 77287-7709
712 East Southmore Ave., Pasadena, Texas 77502
Phone: 713-472-7360 • Fax: 713-472-7241
Email: gagemaker@gagemaker.com or sales@gagemaker.com
Web: www.gagemaker.com
2
Table of Contents
Straight Thread Inspection 4

Tubing & Casing Inspection 20
Rotary Shouldered Connection Inspection 36
Premium Connection Inspection 54
Mud Motor Power Section 68
Custom Gages 78
Measurement & Calibration 82
Calibration, Service, and Repair 94
Gagemaker Products 102
3
Straight Thread Inspection
4 TDWIN Software Functional Size Pitch Diameter

STRAIGHT
THREAD
GAGES
Thread Lead Thread Height Thread Form 5

Straight Thread Inspection System Solutions

Straight Thread Base System
(SBP-400) Base System Includes:
• External pitch diameter gage
0” - 4” • Internal pitch diameter gage
• Acme (2 - 18 pitch) • External functional size gage
• Internal functional size gage
• Stub Acme (2 - 18 pitch) • Internal thread height gage
• Stub Acme Mod 1 (3 - 18 pitch) • External thread height gage
• Stub Acme Mod 2 (4 - 20 pitch) • Lead gage
• Lead gage standard (specify pitch)*
• UN Series (2 - 28 pitch)
• Thread profile(s)*
• UNR Series (2 - 28 pitch) • TDWIN software
• Metric (1.5 - 4 mm pitch) • Two sets of thread rolls (specify form & pitch)*
• All necessary contact points (specify form & pitch)*
• 7 x 45 Buttress (2 - 18 pitch)
*Base System is for one specific form and pitch. Additional thread rolls, contact points,
or standards for additional forms and pitches are available at the package price.
For Additional Sizes and Pitches,

4” - 8” Add-on Solution
SBP-400-1A Add-on Includes:
• RG-7001
• PD-8002
• Lead gage standard (if necessary)*
• Thread profile(s)*
• Two sets of form and pitch specific
thread rolls*
• Two sets of contact points (form and
pitch specific)*
*Add-on Solution is for one specific form and pitch. Additional

thread rolls, contact points, profile, or standards for additional
forms and pitches are available at the package price.
Full solutions for specific form, size, and

pitch are available for 4” - 8” and 8” - 12”.

Choose Your Add-on:
8” - 12” Add-on Solution
SBP-400-2A Add-on Includes:
• RG-7002
• PG-6001
• PD-8002
• PD-6001
• Lead gage standard (if necessary)*
• Thread profile(s)
• Two sets of form and pitch specific
thread rolls*
• Two sets of contact points (form and
pitch specific)*
For larger than 12” or custom sizing, please *Add-on Solution is for one specific form and pitch. Additional
contact Gagemaker at 713-472-7360 or thread rolls, contact points, or standards for additional forms and
sales@gagemaker.com pitches are available at the package price.

Straight Thread Inspection System

Today’s dynamic manufacturing environment overwhelms old “GO/NO GO” methods and only our
Straight Thread Inspection System consistently goes above and beyond. An effective Straight Thread
Inspection System should measure all of the vital thread attributes - Functional Thread Size, Pitch
Diameter, Thread Lead, Thread Height, and Thread Form.

Inspection Setup & Tolerances
Functional Size
Pitch Diameter
Thread Lead
Thread Height
Thread Form

Thread Inspection Setup and Tolerances

The Thread Disk engineering software (TDWIN) calculates critical
dimensions for threads based on ANSI tables and formulas.
Thread types supported by the program include:

• UN Series
• UNJ Series
• UNR Series
• Acme
• Stub Acme
• Stub Acme Modified I
• Stub Acme Modified II
• Metric M & MJ
• 7º X 45º Buttress
• General Purpose Pipe Threads
Thread Disk Software - Straight Thread Dimensions

To generate critical dimensions instantly, enter basic thread information on the Thread Type Entry screen, such as: thread
type, thread class, nominal diameter, and threads per inch. Once the results are computed, tabs at the bottom of the program
allow selection of several types of calculated information, including dimensions and tolerances for product threads, ring
gages, set plugs, plug gages or Gagemaker’s Thread Diameter gages.
If measuring internal and external shallow taper diameters is a problem, the Ball Mic SET DIM Tool provides setting
dimensions for ball micrometers or Gagemaker’s BX-1000 groove gage. The program calculates ball mic settings for any
tapered surface geometry.
Other features of the program include the ability to print thread dimension reports, providing a paper copy of any calculation.
These reports provide the same critical dimensions that display in the program. A multiple calculation window capability is
a feature that allows performing several different thread calculations in one session.
System Requirements
• Windows XP or higher • 64 MB RAM
• 3 MB of free hard disk space • CD-ROM drive
Features
• Uses ANSI tables, formulas, and tolerances
• Calculates standard and non-standard product thread diameters from #000 to 99.8”
• Calculates ANSI ring and plug gage dimensions
• Addresses pitches from 1 to 400
• Calculates Gagemaker style thread gage setting dimensions
10 www.gagemaker.com • sales@gagemaker.com
Model Description
TDWIN Thread Disk software
TDWIN-Network Multi-user license agreement
Phone: 713-472-7360 • Fax: 713-472-7241 11

Thread Functional Size Inspection

Functional gauging takes into account the cumulative effects of
diameter, lead, taper, flank angle and form error. Experience the same
functionality of ring and plugs with the added benefit of accurately
inspecting a range of sizes.
Functional thread inspection gages, or GO/NO GO gages, measure

thread diameters. These functional gages are adjustable within a size
range and use interchangeable thread rolls to measure different pitch
threads.
Setting dimensions for the functional pitch diameter gages are provided
by the TDWIN Thread Disk software.
External Functional Size Gages (⅝” to 24” Diameters)

These functional inspection gages measure external GO/NO GO thread diameters. Software (see page 10) and thread rolls
(see page 13 or 117) are sold separately. For gages with ranges greater than 12”, please see page 116. Higher resolution
indicators are also available.
Model Description Range Resolution Travel
RG-7000 External Thread Roll Gage ⅝” - 4” (15.9 mm - 101.6 mm) .0005” ½”
RG-7001 External Thread Roll Gage 4” - 8” (101.6 mm - 203.2 mm) .0005” ½”
RG-7002 External Thread Roll Gage 8” - 12” (203.2 mm - 304.8 mm) .0005” ½”
Internal Functional Size Gages (1½” to 24” Diameters)

Gagemaker also manufactures functional inspection gages that inspect internal GO/NO GO thread diameters. Software (see
page 10) and thread rolls (see page 13 or 117) are sold separately. For gages with ranges greater than 16”, please see
page 116. Higher resolution indicators are also available.
PG-6000 Internal Thread Roll Gage, 4½” reach 1½” - 9” (38.1 mm - 228.6 mm) .0005” ½”
PG-6001 Internal Thread Roll Gage, 4½” reach 9” - 16” (228.6 mm - 406.4 mm) .0005” ½”
PG-6000
RG-7001
UN Series (60° “V”) Thread Rolls

“TRV” thread rolls inspect the functional fit of machine threaded parts with 60° “V” thread forms. These thread rolls are
designed specifically for internal or external applications. Rolls are sold in matched sets (2 rolls). Specify thread pitch when
ordering. Finer pitches are available upon request.
INTERNAL THREAD DIAMETERS (1½” & Larger) EXTERNAL THREAD DIAMETERS (1½” & Larger)
Model Description Model Description
TRVI-4P 4 pitch internal 60° “V” TRVE-4P 4 pitch external 60° “V”
Acme and Stub Acme Thread Rolls

“TRA” and “TRSA” thread rolls inspect the functional fit of parts with 29° Acme and Stub Acme thread forms. Sold in
matched sets of 2 rolls. Specify the pitch of the thread when ordering. Finer pitches are also available.
Acme Thread Diameters (1½” & Larger) Stub Acme Thread Diameters (1½” & Larger)
TRA-2P 2 pitch 29° Acme TRSA-2P 2 pitch 29° Stub Acme
TRA-12P 12 pitch 29°Acme TRSA-12P 12 pitch 29° Stub Acme
For ISO Metric Series, National 7° X 45° Buttress Series, and Trapezoidial Thread Rolls please see pages 117. Custom thread rolls are available.
Phone: 713-472-7360 • Fax: 713-472-7241 13

Thread Pitch Diameter Inspection

Gagemaker pitch diameter gages, commonly known as ball PD gages,
verify that your part is within allowable tolerances. Improperly sized
pitch diameters compromise the load capacity of your threaded
components.
The ball pitch diameter gages gages indicate the pitch diameter size of
the product’s external and internal threads. The gages are adjustable
within a size range and use interchangeable contact points to
measure different pitch threads. Setting dimensions
for the pitch diameter gages are provided by the
TDWIN Thread Disk software.
External Pitch Diameter Gages (0” to 12” Diameters)

These inspection gages measure external thread pitch diameters. Software (see page 10) and contact points (see page 15
or 124-125) are sold separately. For gages with ranges greater than 12”, please see page 114. Higher resolution indicators
are available.

PD-8001 External Ball Pitch Diameter Gage 0” - 6” (0 mm - 152.4 mm) .0005" ½"
PD-8002 External Ball Pitch Diameter Gage 6” - 12” (152.4 mm - 304.8 mm) .0005" ½"
Internal Pitch Diameter Gages (1½” to 24” Diameters)

These inspection gages measure internal thread pitch diameters. Software (see page 10) and contact points (see page 15
or 124-125) are sold separately. Higher resolution indicators are available.

PD-6000 Internal Pitch Diameter Gage (“V” & Acme) 1½” - 9” (38.1 mm -228.6 mm) .0005" ½"
PD-6001 Internal Pitch Diameter Gage 6” - 24” (152.4 mm - 609.6mm) .0005" ½"
PD-6000
PD-6001
PD-8001
Contact Points
UN Series (60° “V”) Threads
These contacts points are used to inspect the pitch diameter of machined parts with 60° “V” thread forms. Two are required
per gage. Sold individually.
Model Thread Pitch Model Thread Pitch Model Thread Pitch Model Thread Pitch
T562 1 T128 4.5 T072 8 T032 18
T288 2 T115 5 T057 10
T188 3 & 3½ T105 5½ T050 11½ & 12
T144 4 T096 6 T041 14 & 16
Acme or Stub Acme Threads

These truncated contact points are used to inspect the pitch diameter of machined parts with 29° Acme and Stub Acme
thread forms. Two are required per gage. Sold individually.
T531T 1 T188T 3 T090T 6&7 T032T 16
T344T 1½ T144T 3½ T062T 8
T266T 2 T128T 4 T050T 10
T219T 2½ T105T 5 T041T 12 & 14
7° x 45° Buttress Series Contact Points

These contact points are used to inspect the pitch diameter of machined parts with 7° x 45° Buttress thread forms. Two are
required per gage. Sold individually.
T562 1 T219 2½ T115 5 T050 12
T437 1¼ T188 3 T096 6 T032 16 & 18
T375 1½ T156 3½ T072 8
T281 2 T144 4 T057 10
For Trapezoidial or ISO Metric contact points please see pages 125.
Phone: 713-472-7360 • Fax: 713-472-7241 15

Thread Lead Inspection

Thread lead is one of the most important thread elements and directly
affects a part’s functional size.
Lead error is most commonly generated by manual and CNC lathes not
cutting properly. Therefore, it’s important to take measurements at the
locations where the most lead error typically occurs. These readings
help detect machine tool error and worn lead screws on your lathe.
Lead gages inspect both internal and external lead on a variety of thread
forms.
Lead Gages
The LG-5002 uses a two-point system to inspect thread lead for Acme, Stub Acme, Stub Acme Modified I and II, Metric M & J,
UN, UNJ, UNR, 7º X 45º Buttress, and general purpose pipe threads. The two points allow for a sweeping action to obtain
the measurement.
Before inspecting parts, the lead gage must be preset to a nominal predetermined dimension using a lead gage setting
standard. See chart below for the proper standard based on pitch.
Contact points are sold separately. See page 17 or 124-125 for more.
Higher resolution indicators are also available.
Model Description Minimum Bore Range

½” - 4” (12.7mm - 101.6mm)Thread
LG-5002 2-point Lead Gage 1.200
Length
Lead Gage Setting Standards

Gagemaker’s precision lead gage setting standards are manufactured in accordance with ANSI Specifications. Lead gage
standards are used to set the gage prior to the inspection.
Model Connection Type/Description Threads Per Inch (TPI)

LS-5001 Straight Threads, 1-5 pitch, 4” length 1-5
LS-5002 Straight Threads, 6-18 pitch, 4” length 6 - 18
LS-___mm Straight Threads, Metric, specify pitch for model (e.g. LS-4mm)
LS-5002
LS-5001
LG-5002
Contact Points
These contacts points are used to inspect the lead of machined parts with 60° “V” thread forms. Two are required per gage.
Sold individually.
T562 1 T128 4.5 T072 8 T032 18
T288 2 T115 5 T057 10
T188 3 & 3½ T105 5½ T050 11½ & 12
T144 4 T096 6 T041 14 & 16

These truncated contact points are used to inspect the lead of machined parts with 29° Acme and Stub Acme thread forms.
Two are required per gage. Sold individually.
T531T 1 T188T 3 T090T 6&7 T032T 16
T344T 1½ T144T 3½ T062T 8
T266T 2 T128T 4 T050T 10
T219T 2½ T105T 5 T041T 12 & 14

These contact points are used to inspect the lead of machined parts with 7° x 45° Buttress thread forms. Two are required
per gage. Sold individually.
T562 1 T219 2½ T115 5 T050 12
T437 1¼ T188 3 T096 6 T032 16 & 18
T375 1½ T156 3½ T072 8
T281 2 T144 4 T057 10
For Trapezoidial or ISO Metric contact points please see pages 125.
Phone: 713-472-7360 • Fax: 713-472-7241 17

Thread Height Inspection

Measuring thread height helps monitor and control the
depth of cut during manufacturing, detects broken inserts,
and can be used to calculate the minor or major diameter,
when only one is known.
TH-3001V
Accurate thread height contributes to the interchangeability
and integrity of the threaded assembly.
For inspecting your straight thread heights, Gagemaker

recommends our TH-3001V (external) and TH-3010
(internal) .
TH-3010
External Thread Height Gages

Gagemaker manufactures many models of external thread height gages. Specify the type of thread when ordering.
The T500C contact point is included. See contact point pages on 123-125 for other options.
Model Description Travel Min. Bore
TH-3001V External Thread Height, 0-100 .196" 3.230"
Internal Thread Height Gages

Gagemaker also manufactures several models of internal thread height gages. Please specify the type of thread when
ordering. The T500C contact point is included. See contact point pages on 123-125 for other options.
Model Description Travel Min. Bore
TH-3010 Internal Thread Height, 0-100, 1” base .250" 1.750"
Thread Form Inspection
Check proper form and pitch by placing the correct profile Thread Profile
template into the threads. By shining a light behind the

profile template, it’s possible to detect any steps or signs
of a chipped insert. A template that stands too far out
of the threads or allows excess light to shine through
can be an indication of lead error. Sweeping the profile
template along the helix of the threads helps find burrs
or debris.
Thread Form Profiles

Gagemaker manufactures precision straight thread profile gages for the quick identification of product thread forms. Specify
the pitch of the thread to be inspected when ordering. Special form profiles are available and are quoted upon request.
Model Description
TP-UNVI-__P Internal UN series thread gage
TP-UNVE-__P External UN series thread gage
TP-GPA-__P Internal/external general purpose Acme thread profile gage
TP-SA-__P Internal/external Stub Acme thread profile gage
TP-SAM1-__P Modified 1 Stub Acme thread profile gage
TP-MI-__P Internal ISO Metric series thread profile gage
TP-ME-__P External ISO Metric series thread profile gage
TP-745-__P Internal/External 7° X 45° Buttress thread profiile gage
Order Example: TP-UNVI-2P, TP-UNVE-4P, TP-SA-8P, etc.
Overlays for all of these profile gages are available.
Phone: 713-472-7360 • Fax: 713-472-7241 19

Tubing & Casing Thread Inspection
20 TDWIN Taper Software Thread Form Thread Lead

TUBING &
CASING
GAGES
Crest Diameter Thread Taper Thread Height 21

Tubing & Casing Inspection System Solutions

Basic Tubing Solution Solution Includes:
• Ovality & pitch diameter gage (MRP Series)
TBP-200 • MRP pin rod standard*
• MRP box rod standard*
2 ⅜” - 4 ½” EUE, 2 ⅞” - 4 ½” NUE • Internal thread height gage
• External thread height gage
• Thread height standard
• Thread addendum gage
• Thread addendum standard
• Lead gage
• Lead gage standard
• Internal taper gage
• External taper gage
• Thread profile
• TDWIN Taper software
• All necessary contact points
*Solution package includes one pin and one box standard for one connection
size. Standards for additional connection sizes are available at package price.
Tubing Add-on Solutions

1.66” - 1.90” EUE 1.05” - 1.315” EUE
1.66” - 2⅜” NUE 1.05” - 1.315” NUE
TBP-200-1A Add-On TBP-200-2A Add-On
• 1 MRP pin rod standard* • MRP-202
• 1 MRP box rod standard* • 1 MRP pin rod standard*
• TH-3012 • 1 MRP box rod standard*
• TP-RTC-10R profile • TH-3012
• Required contact points • SPG-6000 with contact point
arms
• TP-RTC-10R profile
• Required contact points
For connection packages other than 2⅜” - 4½” USS Buttress
the base packages, please contact
TBP-200-3A Add-On
Gagemaker directly. However, if you • BR-2001-USS
order the basic solution and want • 1 MRP pin rod standard*
more connections, you simply need • 1 MRP box rod standard*
• TH-3004-USS
to add one of the Tubing Add-on or • TH-3002-USS
Casing Add-on solutions*. • THS-USS
• TP-USS-8P Profile
*Add-on solutions include one pin and one box standard for one • Required contact points
connection size. Standards for additional connection sizes are
available at package price.

Basic Casing Solution Solution Includes:
• Ovality & pitch diameter gage (MRP Series)
CBP-300 • MRP pin rod standard*
• MRP box rod standard*
4 ½” - 8 ⅝” LTC/STC • Internal thread height gage
• External thread height gage
• Thread height standard
• Thread addendum gage
• Thread addendum standard
• Lead gage
• Lead gage standard
• Thread profile
• All necessary contact points
*Solution package includes one pin and one box standard for one connection
size. Standards for additional connection sizes are available at package price.
Casing Add-on Solutions

9⅝” - 20” STC/LTC 4½” - 8⅝” Buttress
CBP-300-1A Add-On CBP-300-2A Add-On
• ET-7004 • 1 MRP pin rod standard*
• ET-7006 • 1 MRP box rod standard*
• IT-6001 and extension rods, • TH-3002B
• 1 MRP pin rod standard* • 1017 standard
• 1 MRP box rod standard* • LS-1005
• Required contact points • BR-2001
• TP-5BTC75-EXT
• TP-5BTC75-INT
• Required contact points
9⅝” - 13⅜” Buttress 16” - 20” Buttress

CBP-300-3A Add-On CBP-300-4A Add-On
• ET-7004 • ET-7006
• IT-6001 and extension rods • IT-6001 and extension rods
• 1 MRP pin rod standard* • 1 MRP pin rod standard*
• 1 MRP box rod standard* • 1 MRP box rod standard*
• TH-3002B • TH-3003
• 1017 standard • 1018 standard
• LS-1005 • LS-1006
• BR-2001 • BR-2001
• TP-5BTC75-INT Profile • TP-5BTC1-INT and
• TP-5BTC75-EXT Profile • TP-5BTC1-EXT
• Required Contact Points • Required Contact Points

Tubing & Casing Thread Inspection System

Gagemaker’s Tubing & Casing Thread Inspection System takes the guesswork out of inspecting tubing
and casing. The Gagemaker’s Tubing and Casing Thread Inspection Gages inspect all required thread
elements - Thread Form, Ovality, Crest Diameter, Thread Lead, Thread Height, and Thread Taper – all
with the precise accuracy required in today’s demanding industry.

Inspection Setup & Tolerances
Thread Form
Thread Lead
Crest Diameter and Ovality
Thread Taper
Thread Height

Tubing & Casing Inspection
Inspection Setup and Tolerances

TDWIN Taper is the perfect accessory to Gagemaker’s
Tubing and Casing API Inspection Gages. It’s the only
software program dedicated to the manufacturing and
inspection of downhole tubular connections. TDWIN
Taper relies on API and industry standard tables and
tolerances. It has everything you need to machine, inspect,
and document tubular connection threads. TDWIN Taper
displays connection drawings, inspection gage information,
and setup and inspection reports. It is a must have for any
.006
R
.004
"A" STANDARD DIA 2.2895 .0250
R .1250
.0180
"B" STANDARD 1.1880
STANDOFF
MACHINING TOL. .004 .0354
machine shop.
.06054
INSPECTION TOL. .008 .0522 .0483
.12109
.06054 .0375
KNURLED
IDENTIFICATION 91°
BAND 90°
.008 45.0°±.5° .0320
R R
.006 .0260
.250 8 TPI, 3/4 TPF, USS BUTTRESS
4.125 PITCH TOLERANCE:
.002 PER INCH; .004 CUMULATIVE
"B" 20°
• Print dimensional reports and inspection sheets "A"

.0497±.0010
• Print product blueprints for manufacturing and inspection

2.494
.016
2.337 THREAD HEIGHT
PITCH & MEASUREMENT POINT
2.875
• View gage configurations, setting standards, and contact point

2.615
1.500
8.500 4.250
information
NOTICE:
GAGEMAKER, L.P. RESERVES THE RIGHT TO MAKE
CHANGES IN SPECIFICATIONS WITHOUT NOTICE
ON ANY AND ALL PARTS SHOWN AND
NO RESPONSIBILITY IS ASSUMED BY
GAGEMAKER, L.P. FOR MAINTAINING
OR UPDATING THIS DRAWING.
INFORMATION FURNISHED BY GAGEMAKER, L.P.
IS BELIEVED TO BE ACCURATE AND RELIABLE.
HOWEVER, NO RESPONSIBILITY IS ASSUMED BY
GAGEMAKER, L.P. FOR ITS USE OR INACCURACIES.
DRAWN: J. H. DUNTEN DWG NO: 10-0-881
CKD: J. DOUGLAS REV: --

C GAGEMAKER, L.P.
2-3/8 COUPLING USS IMPROVED BUTTRESS P.O. BOX 87709
DATE: DEC 2008 ALL RIGHTS RESERVED HOUSTON, TEXAS 77287
The program includes the following tapered connections:
Tubing and Casing Connections

NUE Tubing USS Improved Buttress Tubing
EUE Tubing Line Pipe
Short Thread Casing Special Clearance Couplings
Long Thread Casing SR13 Seal Ring Groove Couplings
Buttress Casing
Rotary Shouldered Connections

API Numbered Connections - NC PAC Slimline H-90 - SL H-90
API Regular - REG Slim Hole - SH External Flush - EF
Full Hole - FH Wide Open - WO Acme Regular - AR
Internal Flush - IF Xtra Hole - XH Acme Streamline AS
Open Hole - OH Hughes 90 - H-90 Double Streamline - DSL
System Requirements
• Microsoft Windows XP or newer
• USB 2.0 port
• Internet Connection for first use
• 1 MB RAM or more (recommended)
• Screen resolution of 1024 X 768 minimum
• .Net Framework 2.0 or later installed
Model Description
TDWIN-Taper Thread Disk Software for Tapered Threads
TDWIN-Taper-Network Multi-user license agreement
Correct thread form is important for a pipe end and coupling
to make up properly. Doing a quick check using a Gagemaker
thread profile verifies the thread form is correct.
Profile gages can also be used to perform a visual

inspection of a thread form for detecting chipped
inserts, steps, flat crested threads, stretched
threads, wide first threads, or rolled over
threads.
TP-RTC-8R
Thread Form Profiles

Gagemaker manufactures precision tapered thread profile gages for the quick identification of product thread forms.
Specify the connection which is to be inspected when ordering. Special profiles will be quoted upon request.
Model Connection Type Taper Per Foot (TPF) Threads Per Inch (TPI)
TP-RTC-8R API 8-Round Casing, Tubing & Drill Pipe ¾” 8
TP-RTC-10R API 10-Round Tubing ¾” 10
TP-5BTC75-INT API Buttress Casing, Internal, 4½” - 13⅜” ¾” 5
TP-5BTC75-EXT API Buttress Casing, External, 4½” - 13⅜” ¾” 5
TP-5BTC1-INT API Buttress Casing, Internal, 16” - 20” 1” 5
TP-5BTC1-EXT API Buttress Casing, External, 16” - 20” 1” 5
Line Pipe, NPT, and Specials are Available Upon Request
Overlay Charts are also available. For information, contact Gagemaker directly. Specials are also available. For Special Overlays, please specify the following:
1. Screen Size
2. Magnification 20X/50X
3. Product Form or Profile Template
Phone: 713-472-7360 • Fax: 713-472-7241 27


Gagemaker lead gages use interchangeable contact points to inspect
both pin and box threads for a wide variety of API tubing & casing
connections. Lead inspection is both an API mandated requirement and
an industry wide practice. Defined as the distance between threads as
measured on a plane parallel to the centerline of the threaded part, lead
variation has a direct effect on stand-off, thread flank engagement, and
make-up. Lead error is most commonly generated by manual and CNC
lathes not cutting properly. Gagemaker lead gages provide dimensional
verification of product print data.
LG-5002
Lead Gages
The lead gage inspects both internal and external thread leads using contact points that seat in the threads of a part. The
pitch of the thread determines the diameter of the contact points required for taking measurements.
The LG-5002 is a two-point gage for inspecting thread lead on API threads. The two points allow for a sweeping action to
obtain the measurement.
The LG-5003 is a three-point gage for inspecting thread lead on API threads. Two fixed contact points at the rear of the gage
and one moveable contact point at the front of the gage provide complete stability when taking thread lead measurements.
This unique design does not require sweeping to obtain measurements.
Contact points can be easily changed to allow the gages to be used on a variety of thread forms. For tubing and casing,
please see page 29 for contact points. Additional points can be found on pages 124-125.
standard. For tubing and casing, please see page 29 for standards.
More gage models and accessories can be found on pages 120-121. Higher resolution indicators are available.

½” - 4” (12.7mm - 101.6mm)
Thread Length
½” - 4” (12.7mm - 101.6mm)
Thread Length
LG-5003
Lead Gage Setting Standard

Gagemaker’s precision lead gage setting standards are manufactured in accordance with API Specification 5B. Lead gage
Model Connection Type/Description TPF* TPI*

API 8-Round Casing, Tubing & Drill Pipe,
LS-1001 ¾” 8 & 10
All 10-Round Tubing
LS-1005 API Buttress Casing, Internal/External 4½” - 13⅜” ¾” 5
LS-1006 API Buttress Casing, Internal/External 16” - Larger 1” 5

*TPF = Taper Per Foot, TPI = Threads Per Inch
API Contact Points for Lead Gages

Gagemaker’s standard ball contact points are manufactured with carbide balls. Both threaded and straight (non-threaded)
shanks are available. All of Gagemaker’s inspection gages use threaded shank contact points and are #4-48 UNF. Metric
threads are available upon request. Lead gages require two or three contact points. Contact points are sold individually.
Point Threads
Model Connection Type
Diameter Per Inch
T090 0.090” 5 Buttress Casing – Taper
T072 0.072” 8 API Tubing and Casing
T062 0.062” 5 Buttress Casing – Lead
T057 0.057” 10 API Tubing
*Line Pipe and NPT contact points and standards are available.
For contact points,see pages 124-125. For standards, see page 121.
Phone: 713-472-7360 • Fax: 713-472-7241 29

Crest Diameter and Ovality Inspection

Thirty years ago, Gagemaker introduced the MRP gage which forever
changed the industry. Today, the MRP is the industry standard worldwide.
Whether you call it Crest Diameter, Root Diameter, or Ball PD, Pitch
Diameter governs the strength of the actual thread assembly and ensures
API dimensional measurement specs are met.
The Gagemaker MRP gages measure the internal and external pitch
diameters of tapered threaded connections. Any slight variations in
diameter or ovality are immediately detected with these precision gages
granting you total control over your quality. These versatile gages easily
adjust to measure thread diameters ranging from 1½” - 20”. The ability
to inspect a range of diameters with one gage, eliminates the need for a
room full of ring or plug gages.
MRP Crest Diameter and Ovality Gages

The MRP series of gages detects variations in crest diameter by the use of a gage shoe that rests on the crest of the threads.
Variation in diameter is detected by the indicator readout. These gages must be set to a nominal size with one of a variety
of setting standards or a MIC TRAC. Refer to the standard chart that follows. All of these gages are API approved for use on
tubing and casing. Additional gages, parts, & accessories can be found on pages 104-109.
Model Description Range
Internal 1½” - 4½”
MRP-1000 Internal/External Crest Diameter Gage
External 1½” - 4½”
MRP-1001 External Crest Diameter Gage External 1½” - 4½”
MRP-2001 External Crest Diameter Gage External 2⅜” - 20”
MRP-2002 Internal Crest Diameter Gage Internal 2⅜” - 20”
Internal 2⅜” - 20”
MRP-2003 Internal/External Crest Diameter Gage, 4¼” reach
External 2⅜” - 20”
Rod Style Setting Standards for MRP-1000 and MRP-2000 Series

Rod style setting standards are designed to preset all models of the MRP Series gages for accurate inspection of API
threaded connections. Each set of standards consists of two precision ground rods that are ground to lengths in accordance
with API Specification 5B. Other standard styles and connections are available, see pages 108-109.
Thread Type Connection Pin Standard Model Box Standard Model
2⅜” NUE MRP-238NUE-P MRP-238NUE-B
2⅞” NUE MRP-278NUE-P MRP-278NUE-B
NUE 3½” NUE MRP-312NUE-P MRP-312NUE-B
4” NUE MRP-4NUE-P MRP-4NUE-B
4½” NUE MRP-412NUE-P MRP-412NUE-B
2⅜” EUE MRP-238EUE-P MRP-238EUE-B
2⅞” EUE MRP-278EUE-P MRP-278EUE-B
EUE 3½” EUE MRP-312EUE-P MRP-312EUE-B
4” EUE MRP-4EUE-P MRP-4EUE-B
4½” EUE MRP-412EUE-P MRP-412EUE-B
MRP-2002
MRP Rod Standards
MRP-1001
MRP-1000
Rod Style Setting Standards (Cont’d.)
Thread Thread
Connection Pin Standard Box Standard Connection Pin Standard Box Standard
Type Type
4½” Buttress MRP-412B-P MRP-412B-B 4½” - 9.50# 8R STC MRP-412S-9-P MRP-412S-9-B
5” Buttress MRP-5B-P MRP-5B-B 4½” - Other 8R STC MRP-412S-O-P MRP-412S-O-B
5½” Buttress MRP-512B-P MRP-512B-B 5” - 11.50# 8R STC MRP-5S-11-P MRP-5S-11-B
6⅝” Buttress MRP-658B-P MRP-658B-B 5” - Other 8R STC MRP-5S-O-P MRP-5S-O-B
7” Buttress MRP-7B-P MRP-7B-B 5½” 8R STC MRP-512S-P MRP-512S-B
7⅝” Buttress MRP-758B-P MRP-758B-B 6⅝” 8R STC MRP-658S-P MRP-658S-B
8⅝” Buttress MRP-858B-P MRP-858B-B 7” - 17.00# 8R STC MRP-7S-17-P MRP-7S-17-B
Buttress 9⅝” Buttress MRP-958B-P MRP-958B-B 7” - Other 8R STC MRP-7S-O-P MRP-7S-O-B
10¾” Buttress MRP-1034B-P MRP-1034B-B 7⅝” 8R STC MRP-758S-P MRP-758S-B
11¾” Buttress MRP-1134B-P MRP-1134B-B 8⅝” - 24.00# 8R STC MRP-858S-24-P MRP-858S-24-B
13⅜” Buttress MRP-1338B-P MRP-1338B-B 8⅝” - Other 8R STC MRP-858S-O-P MRP-858S-O-B
16” Buttress MRP-16B-P MRP-16B-B STC 9⅝” 8R STC MRP-958S-P
MRP-958S-B>P110 or
18⅝” Buttress MRP-1858B-P MRP-1858B-B MRP-958S-B<P110
20” Buttress MRP-20B-P MRP-20B-B 10¾” - 32.75# 8R STC MRP-1034S-32-P MRP-1034S-32-B
4½” 8R LTC MRP-412L-P MRP-412L-B MRP-1034S-O-B>P110 or
10¾” - Other 8R STC MRP-1034S-O-P
5” 8R LTC MRP-5L-P MRP-5L-B MRP-1034S-O-B<P110
MRP-1134S-B>P110 or
5½” 8R LTC MRP-512L-P MRP-512L-B 11¾” 8R STC MRP-1134S-P
MRP-1134S-B<P110
6⅝” 8R LTC MRP-658L-P MRP-658L-B MRP-1338S-B>P110 or
7” 8R LTC MRP-7L-P MRP-7L-B 13⅜” 8R STC MRP-1338S-P
MRP-1338S-B<P110
LTC 7⅝” 8R LTC MRP-758L-P MRP-758L-B 16” 8R STC MRP-16S-P MRP-16S-B
8⅝” 8R LTC MRP-858L-P MRP-858L-B 18⅝” 8R STC MRP-1858S-P MRP-1858S-B
MRP-958L-B>P110 or MRP-20S-B>JK55 or
9⅝” 8R LTC MRP-958L-P 20” 8R STC MRP-20S-P
MRP-958L-B<P110 MRP20S-B<JK55
MRP-20L-B>JK55 or
20” 8R LTC MRP-20L-P
MRP20L-B<JK55
Line Pipe, NPT, step style, and frame style standards are available.
All Special Orders, Non-Standard API Standards, or Premium Connection Setting Standards are extra.
Phone: 713-472-7360 • Fax: 713-472-7241 31

Thread Taper Inspection

Tapered threads are a signature feature of API Tubing & Casing
connections. Measuring thread taper is not only an industry wide
practice, it is an API Specification 5B mandated inspection. During
the manufacturing process, taper must be accurately measured and
quantified to stay within the required specification limits. When subjected
to a service load, taper error on threaded tubing and casing
connections can lead to galling, improper
fit, and reduced performance.
For the most accurate taper inspection,

use Gagemaker taper gages to verify
both the threaded pin and coupling meet
all customer and industry requirements.
Gagemaker’s taper gages are the best choice for
measuring and controlling both pin and box taper values.
External Taper Gages

Gagemaker’s external taper gages inspect variation in external thread taper. Unless specified otherwise, external taper gages
are shipped with .072” diameter contact points (T072) as standard. Refer to the chart on the following page for the proper
contact point for your particular connection. Each gage requires two contact points. Higher resolution indicators are available.
Model Description Range Travel Resolution

ET-7001 External Taper, ½” travel 0” - 6” ½” .001”
ET-7003 External Taper, 1” travel 0” - 10” ½” .001”
Internal Taper Gages

Gagemaker’s internal taper gages measure variation in thread taper. Taper gages are shipped with our standard set of
.072” diameter contact points (T072), unless specified otherwise or requested. Refer to the chart on the following page for
the proper contact point for your particular connection. Each internal gage requires two contact points. Higher resolution
indicators are available.

IT-6000 Internal Taper Gage 4¼” Depth, 1½” - 9” Diameter 1” .001”
IT-6001 Internal Taper Gage Any Depth, 5” - 13⅜" API Sizes ½” ..001”
ET-7001
IT-6000
API Contact Points for Taper Gages

Gagemaker’s standard ball contact points are manufactured with carbide balls. All of Gagemaker’s inspection gages use
threaded shank contact points. Threaded shanks are #4-48 UNF. Metric threads are available upon request. Taper gages
require two contact points. Additional contact points can be found on pages 124-125.
Threads Per Inch

Model Point Diameter Connection Type
(TPI)
T090 0.090” 5 Buttress Casing – Taper
T072 0.072” 8 API Tubing and Casing
T057 0.057” 10 API Tubing and Line Pipe
Phone: 713-472-7360 • Fax: 713-472-7241 33


Proper Thread Height maximizes the performance of the connection.
Thread height inspection is an API requirement. Gagemaker thread
height gages inspect external or internal thread height for a variety of
thread forms. A shallow thread height may allow the connection to pull
apart under stress.
TH-3006
TH-3002R

Gagemaker manufactures many models of external thread height gages. Specify the type of thread when ordering. One
contact point based on thread type is included, please refer to the chart on page 35. For tubing and casing, standards may
be required, please see page 35 for more.
Model Description Connection Travel Min. Bore

TH-3002B External Thread Height, 0-25-0 ¾” TPF Buttress .094" 2.930"
TH-3002R External Thread Height, 0-50-0 8-Round & 10-Round .162" 3.400"
TH-3002S External Thread Height, 0-50-0 8-Round .196" 3.230"

Gagemaker also manufactures several models of internal thread height gages. Please specify the type of thread when
ordering. One contact point based on thread type is included, please refer to the chart on page 35. For tubing and casing,
standards may be required, please see page 35 for more.

TH-3006 Internal Thread Height, 0-25-0 8-Round & 10-Round .105" 1.595"
TH-3008 Internal Thread Height, 0-25-0 8-Round & 10-Round .094" 1.575"
TH-3009 Internal Thread Height, 0-25-0 ¾” TPF Buttress .250" 1.750"
TH-3002B
Thread Height Gage Standards

Gagemaker manufactures API mandated precision setting standards for presetting thread height gages. Please specify the
type of thread when ordering.
Model Description
1014 8 & 10 Round Threads
1014S 8 & 10 Round Threads (Crest to Pitchline “Shave/Addendum”)
1017 13⅜” & Smaller Buttress, ¾” TPF

1018 16” & Larger Buttress, 1”TPF
Thread Height Gage Contact Points

The contact points are interchangeable between gages. Contact point diameters are manufactured to tolerances of +.0002”.
Thread height gages require one contact point. Additional points are available, please see pages 123-124.
Model Description
T072 0.072” Contact Point for Buttress Threads
T501 50° Cone Contact Point, Self-Centering for TH-3001R, TH-3002R Gages
T502 Self-Centering Sleeve for T501 & T503 Contact Points
T503 50° Cone Contact Point, “V” Threads for TH-3006
Phone: 713-472-7360 • Fax: 713-472-7241 35

Rotary Shouldered Connection Thread Inspection
36 TDWIN Taper Software Thread Lead Thread Form

ROTARY
SHOULDERED
CONNECTION
GAGES
Thread Taper Pitch Diameter Thread Height 37

Choose Your
Joint
Strength FIELD SOLUTION
System JSS-100
Solutions Field Solution Includes:
• Internal pitch diameter gage
• Location profiles for box
Inspect the following Connections: • Location profile for pin
• API No. Connection (NC) - 23, 26, 31, 35, • Lead gage and standard
38, 40, 44, 46, 50 • External taper gage
• Double Streamline - 3½”, 4, 4½”, 5½” • Thread height gages and
• External Flush - 3½”, 4½” standard
• Thread profiles
• Full Hole - 4” • TDWIN Taper Software
• Internal Flush - 2⅜”, 2⅞”, 3½”, 4, 4½” • 1 external rod standard*
• 1 internal rod standard*
• Slim Hole - 2⅜”, 2⅞”, 3½”, 4, 4½”
• Necessary contact points
• Xtra Hole - 2⅞”, 3½”, 4½”, 5” *Field Solution includes one pin and one box standard for one connection size.
Rod standards for additional connection sizes are available at solution price at time of package order.
For Additional Connections,

Connections
FH - 2⅞”, 3½”, 4½” FH - 5½”, 6⅝” H - 90 - 3½”, 4”, 4½”,
IF - 5½”, 6⅝” EF - 2⅜”, 2⅞” REG - 5½”, 7⅝”, 8⅝”
REG - 2⅜”, 2⅞”, 3½”, 4½” REG - 6⅝” 5”, 5½”, 6⅝”
JSS-100 Field Solution Add-ons

JSS-100-1A JSS-100-2A JSS-100-3A JSS-100-4A JSS-100-5A JSS-100-6A
x2 x7 x3 x6
x2 x3
x7 x3 x6
x2 x2 x3
x4 x2 x2
x2 x4 x4
JSS-500 Shop Solution Add-ons

JSS-500-1A JSS-500-2A JSS-500-3A JSS-500-4A JSS-500-5A JSS-500-6A
4x x2 4x
x2
x4 x2

Base Package:
SHOP SOLUTION
JSS-500
Shop Solution Includes:
• Internal pitch diameter gage
OR
• Location profile for box
• Location profile for pin
• Lead gage and standard
• Thread height gage and standard
• Thread profiles
• MIC TRAC (MT-3000)
• Necessary contact points
Choose Your Add-ons:
NC - 10, 12, 13, 16 PAC - 2⅜”, 2⅞”, 3½”

H - 90 - 7”, 7⅝”, 8⅝” SL H-90 - 2⅜”, 2⅞”, 3½” NC - 56, 61, 70, 77
REG - 1”, 1½” OH - 2⅜”, 2⅞”, 3½”, 4”, 4½”
JSS-100-7A JSS-100-8A JSS-100-9A JSS-100-10A JSS-100-11A
x3 x4 x8
x3 x6
x3 x4
x3 x6 x8
x2 x2 x2
x2
JSS-500-7A JSS-500-8A JSS-500-9A JSS-500-10A JSS-500-11A
x2 x2
2x
x2

Rotary Shouldered Connection Thread Inspection System

Gagemaker’s Joint Strength System (JSSTM) is a revolutionary breakthrough in accurately gauging
the quality of both new and used rotary shouldered connections. It’s now possible to avoid broken
connections by identifying thread damage before it’s visually apparent and unfortunately too late. For
years, the industry has relied on the interpretative “fit” of a ring or plug gage although a ring or plug
gage will not directly detect variation in pitch diameter. With JSSTM, you’ll inspect just a few key
attributes and save hours of down time and thousands of dollars in rework charges.

Insert Identification
Thread Form
Pitch Diameter
Thread Lead
Thread Taper
Thread Height


TDWIN Taper is the only software program dedicated to the
manufacturing and inspection of downhole tubular connections. It
has everything you need to machine, inspect, and document tubular
connection threads. TDWIN Taper relies on API and industry standard
tables and tolerances. TDWIN Taper displays connection drawings,
inspection gage information, and setup and inspection reports. Simply,
it is a must have for any machine shop.
TDWIN Taper is included in any full JSS Package.
• Follows API Specification 7-2, Dec. 2008, for Rotary Shouldered
Connections and API Specification 5B, Oct. 2008, for Tubing and
Casing Connections
• Print dimensional reports and inspection sheets
• Provides gages configurations, setting standards, and contact point
information
The program includes the following tapered connections:

Buttress Casing

API Numbered Connections - NC PAC Slimline H-90 - SL H-90
API Regular - REG Slim Hole - SH External Flush - EF
Full Hole - FH Wide Open - WO Acme Regular - AR
Internal Flush - IF Xtra Hole - XH Acme Streamline AS
Open Hole - OH Hughes 90 - H-90 Double Streamline - DSL
System Requirements
• USB 2.0 port
• Screen resolution of 1024 X 768 minimum
Model Description
The oilfield’s most reliable source of information to
accurately machine, inspect, and document tapered
threaded connections
Consulting TDWIN Taper should be
your first step in quality assurance.
Until now, this type of information
was available only through closely
controlled documents supplied by a few
industry leaders. Now, all the latest
dimensions, gauging tolerances, and
inspection reports for the connections
you need to cut are available with a
few keystrokes.
Stay on top of the ongoing changes in

industry specifications with your own
copy of the TDWIN Taper program.
Phone: 713-472-7360 • Fax: 713-472-7241 43

The first step in the quality process is to ensure the
threading insert being used is correct for the job.
Use a Thread Insert Identifier Template to quickly verify

that the correct threading insert has been selected as
well as check the full topping profile of both internal and
external inserts.
TI-60
A quick mating of the insert to the template ensures the
insert is correct for the job.
Insert identifiers have multiple notches on each template

and are available for all API thread forms.
Tapered Insert Identifiers

Gagemaker’s new tapered thread insert indentifier easily determines which threading insert the machinist is using.
When an optical comparator is unavailable, the insert indentifier will show which thread form is on the insert.
Model TPF Thread Forms
TI-RSC-60 1.5", 2", & 3" V-0.032, V-0.038R, V-0.040, V-0.050, V-0.055, V-0.076
TI-RSC-90 1.25", 2", 3", & 3.373" A-0.094, 90-V-0.050, 90-V-0.084
Thread form accuracy is important if two connections
are to make-up properly. Using a Thread Profile Gage
provides a quick check of the thread to ensure that the
TP-4-2-50
form is correct. The Thread Profile should be used on
every connection to ensure the first imperfect thread
was deburred fully.
Thread form is defined as its profile in an axial plane for

a length of one pitch. Most importantly, verifying thread
form is a recommended inspection for API connections
and ensures form accuracy.
Thread Profile Gages

Gagemaker manufactures precision tapered thread profile gages for the quick identification of product thread forms. Specify
the connection which is to be inspected when ordering. Special profiles will be quoted upon request.
Model Connection Type TPI, TPF, Thread Form

TP-3-1.25-84 2⅜” - 3½” Hughes Slimline H-90 3 TPI, 1.25” TPF, 90-V-0.084
TP-3.5-2-50 3½”- 6⅝” Hughes H-90 3.5 TPI, 2” TPF, 90-V-0.050
TP-3.5-3-50 7” - 8⅝” Hughes H-90 3.5 TPI, 3” TPF, 90-V-0.050
2⅜” - 3½” P.A.C. Connections
TP-4-1.5-76 4 TPI, 1.5” TPF, V-0.076
2⅜” - 4½” American Open Hole
6⅝” API REG
TP-4-2-50 4 TPI, 2” TPF, V-0.050
5½” & 6⅝” API Full Hole
3½” - 5½” Double Streamline,
3½” - 4½” External Flush,
4” API Full Hole,
2⅜” - 4½” Hughes Slim Hole,
TP-4-2-38 4 TPI, 2” TPF, V-0.038R
2⅞” - 5” Hughes Xtra Hole,
2⅜” - 6⅝” Internal Flush
2⅜” - 4½” Wide Open
API Numbered Connections #23 - #50
TP-4-3-38 API Numbered Connections #56 - #77 4 TPI, 3” TPF, V-0.038R
TP-4-3-50 5½”, 7⅝”, & 8⅝” API REG 4 TPI, 3” TPF, V-0.050
2⅜” - 4½” API REG
TP-5-3-40 5 TPI, 3” TPF, V-0.040
2⅞”, 3½”, 4½” API Full Hole
API Numbered Connections #10, #12, #13, #16
TP-6-1.5-55 6 TPI, 1.5” TPF, V-0.055
M.T. (Macaroni Tubing)
TP-6-2-32 2⅜" - 2⅞” Hughes External Flush 6 TPI, 2” TPF, V-0.032
Special profiles and overlay charts are available. For information on those available, please contact customer service.
For Special Overlays, please specify the following: 1. Screen Size, 2. Magnification 20X/50X, and 3. Product Form or Profile Template
Phone: 713-472-7360 • Fax: 713-472-7241 45

Thread Pitch Diameter Inspection

Now, operators are able to inspect both new and used pipe threads using precision
Pitch Diameter Gages that allow them to pinpoint early signs of stress, perform
preventative maintenance, and extend the life of their drill string connections.
By measuring the pitch diameters, the operators can directly control the
connection’s size during manufacturing, as well as ensure that the thread cones
go into interference properly when the connections are torqued together.
In the past, pitch diameter has been ignored as long as the ring or plug gage
threaded to an acceptable standoff. Using a pin location profile (LPP) and a PD-
8000-RSC Series gage(pin) or a box location profile (LPB) with an IT-5104-RSC
(box) provides you plenty of control. The process of locating and measuring
the pitch diameter takes less than a minute. This minute of inspection quickly
decides the difference between good quality and bad quality.
Pitch Diameter Location Templates

Pitch diameter location templates locate the point on the connection where the pitch diameter is measured. When applied
properly to the connection, the template’s special layout mark indicates the proper thread to measure the pitch diameter.
A simple mark with a felt tip marking pen allows the operator or inspector to accurately position the gage and read a
diameter. Please specify the threads per inch ( TPI), taper per foot (TPF), and thread form when ordering.
Box Pitch Diameter Location Templates

Model Thread Form Model Thread Form
LPB-3-1.25-SLH9 3 TPI, 1.25 TPF, 90-V-0.084 LPB-4-3-50 4 TPI, 3 TPF, V-0.0.050
LPB-3.5-2-H9 3.5 TPI, 2 TPF, 90-V-0.050 LPB-4-3.375-A-0.094 4 TPI, 3.375 TPF, A-0.094
LPB-3.5-3-H9 3.5 TPI, 3 TPF, 90-V-0.050 LPB-5-3-40 5 TPI, 3 TPF, V-0.040
LPB-4-1.5-76 4 TPI, 1.50 TPF, V-0.076 LPB-6-1.0-55 6 TPI, 1.0 TPF, V-0.055
LPB-4-2-38 4 TPI, 2 TPF, V-0.038R LPB-6-1.5-55 6 TPI, 1.50 TPF, V-0.055
LPB-4-2-50 4 TPI, 2 TPF, V-0.050 LPB-6-2-32 6 TPI, 2 TPF, V-0.032
LPB-4-3-38 4 TPI, 3 TPF, V-0.038
Pin Pitch Diameter Location Templates

Model Thread Form Model Thread Form
LPP-3-1.25-SLH9 3 TPI, 1.25 TPF, 90-V-0.084 LPP-4-3-50 4 TPI, 3 TPF, V-0.050
LPP-3.5-2-H9 3.5 TPI, 2 TPF, 90-V-0.050 LPP-4-3.375-A-0.094 4 TPI, 3.375 TPF, A-0.094
LPP-3.5-3-H9 3.5 TPI, 3 TPF, 90-V-0.050 LPP-5-3-40 5 TPI, 3 TPF, V-0.040
LPP-4-1.5-76 4 TPI, 1.50 TPF, V-0.076 LPP-6-1.0-55 6 TPI, 1.0 TPF, V-0.055
LPP-4-2-38 4 TPI, 2 TPF, V-0.038R LPP-6-1.5-55 6 TPI, 1.50 TPF, V-0.055
LPP-4-2-50 4 TPI, 2 TPF, V-0.050 LPP-6-2-32 6 TPI, 2 TPF, V-0.032
LPP-4-3-38 4 TPI, 3 TPF, V-0.038
LPB-4-1.5-76
IT-5104-RSC
PD-8001-RSC
LPP-4-1.5-76
Internal Pitch Diameter Gages

Gagemaker’s internal pitch diameter gages measure variation in intrenal thread pitch diameters. Pitch diameter gages are
shipped with one set of contact points, please see the chart below to request proper points. Setting dimensions for the
pitch diameter gages are provided by the TDWIN TAPER software package. Gages require setting with either a standard or a
MIC TRAC. Software (page 42), MIC TRAC (pages 87-93), contact points, and standards (page 113) are sold separately.
IT-5104-RSC Internal Pitch Diameter Gage 4” (101.6 mm) Depth, 1½” - 10” (38.1 mm - 254 mm) Diameter
External Pitch Diameter Inspection Gages

The ball pitch diameter gages indicate the pitch diameter size of the product’s external thread. The gages are adjustable
within a size range and use interchangeable contact points to measure different pitch threads. Gages ship with one set of
contact points, please see the chart below to request proper points. Gages require setting with either a standard or a MIC
TRAC. Software (page 42), MIC TRAC (pages 87-93), contact points, and standards (page 113) are sold separately.
PD-8001-RSC External Pitch Diameter Gage 0” - 6” (0 mm - 152.4 mm)
PD-8002-RSC External Pitch Diameter Gage 6” - 12” (152.4 mm - 304.8 mm)
API Contact Points for Pitch Diameter Gages

Gagemaker’s standard ball contact points are manufactured with carbide balls. All RSC inspection gages use threaded shank
contact points. Threaded shanks are #4-48 UNF. Pitch diameter gages require two contact points. Sold individually.
Model Point Diameter Threads Per Inch Connection Type
T235 0.235” 3 Hughes Slim Line H-90
T200 0.200” 3½ All Hughes H-90
T144 0.144” 4 API Rotary Shouldered Connections
Phone: 713-472-7360 • Fax: 713-472-7241 47


Thread Lead is one of the most important thread elements to monitor. Not
only is lead inspection an industry wide practice for rotary shouldered
connections, it is an API Specification 7 mandated requirement. Lead error
is most commonly generated by manual and CNC lathes not cutting properly.
Thread lead is the distance between threads, measured on a plane parallel

to the centerline of the threaded part. Lead error has a direct effect on
functional diameter, stand-off, and thread flank engagement.
Gagemaker’s lead gages inspect pin and box connections for multiple pitches
and thread forms. The gages provide dimensional verification of product
print data on the thread’s true integrity.
• Interchangeable contact points allow inspection on a variety of thread forms.
• Inspect RSC threads as well as Tubing and Casing threads.
• Requires presetting using Gagemaker’s lead gage setting standards.
Lead Gages
The LG-5002 is a two-point gage for inspecting thread lead for API threads. The two points allow for a sweeping action to
obtain the measurement.
The LG-5003 is a three-point gage for inspecting thread lead on API threads. Two fixed contact points at the rear of the gage
and one moveable contact point at the front of the gage provide complete stability when taking thread lead measurements.
This unique design does not require sweeping to obtain measurements.
Contact points can be easily changed to allow the gage to be used on a variety of thread forms. Lead gages come with two
contact points. Please specify type of points required when ordering, see page 44 for chart.
standard. Please see the chart on page 44 to select your standard. Standards are not inlcuded.
LG-5002 2-point Lead Gage 1.200 ½” - 4” Thread Length
LG-5003 3-point Lead Gage 1.340 ½” - 4” Thread Length
LG-5002

Gagemaker’s precision lead gage setting standards are manufactured in accordance with API Specification 7-2. Lead gage
6⅝” API Reg; 4”, 5½”, & 6⅝” API Full Hole; 2⅞”, 3½” - 5” Hughes Xtra Hole;
LS-1007 2⅜”, 2⅞” - 4½” Hughes Slim Hole; 2⅜” - 5½” API INT Flush; 2” 4
API Numbered Connections #23-#50
LS-1008 5½”, 7⅝” - 8⅝” API Reg, API Numbered Connections #56 - #77 3” 4
LS-1009 2⅜” - 4½” API Reg, 3½”, 4½” API Full Hole 3” 5
A.M.T. (Macaroni Tubing)
LS-1010 1½” 4
2⅜” - 3½” PAC
2⅜” - 4” American Open Hole
LS-1011 3½” - 6⅝” Hughes H-90 2” 3½
LS-1012 7”- 8⅝” Hughes H-90 3” 3½
LS-1013 2⅜” - 3 ½” Slim Line H-90 1¼” 3
API Contact Points for Lead Gages

Gagemaker’s standard ball contact points are manufactured with carbide balls. All Gagemaker lead gages use threaded
shank contact points. Threaded shanks are #4-48 UNF. Lead gages require two or thee contact points. See pages 124-125
for additional contact points.
Model Point Diameter Threads Per Inch Connection Type
T200 0.200” 3½ All Hughes H-90
T128 0.128” 4½ API Rotary Shouldered Connections
Phone: 713-472-7360 • Fax: 713-472-7241 49

Thread Taper Inspection

Thread Taper is the change in pitch diameter over the length of a
connection, typically designated in inches per foot. For all rotary
shouldered connections, measuring thread taper is not only an industry
wide practice; it is an API mandated inspection.
During the manufacturing process, taper must be accurately measured

and quantified to avoid mismatched tapers. When under a service load,
mismatched tapers between pins and boxes diminish proper thread
engagement resulting in reduced connection performance.
ET-7001
0-6”
Gagemaker’s IT-6000 and ET-7000 series gages are the best choice
for measuring and controlling both pin and box taper values within
the required specification limits. When RSC connections are properly
manufactured utilizing Gagemakers precision taper gages, product IT-6000
performance is maximized.

Gagemaker’s external taper gages inspect variation in connection taper. External taper gages are shipped with .072” diameter
contact points unless otherwise requested. Refer to the contact point chart on the next page for the proper contact point for
your particular connection. Higher resolution indicators are available. For larger diameters, see page 115.

ET-7003 External Taper Gage 0” - 10” 1” .001”

Gagemaker’s internal taper gages measure variation in connection taper. Taper gages are shipped with our standard set of
.072” diameter contact points, unless specified otherwise. Refer to the contact point chart on the next page for the proper
contact point for your particular connection. Higher resolution indicators are available. For larger diameters, see page 115.

IT-6000 Internal Taper Gage, 4¼” Depth 1½” - 9” Diameter 1” .001”
API Contact Points for Taper Gages
Gagemaker’s standard contact points are manufactured with carbide balls. Taper gages use threaded shank contact points.
Threaded shanks are #4-48 UNF. For other contact points, please see pages 124-125. Taper gages require two contact
points. Sold individually.
Threads Per Inch

Model Point Diameter Connection Type
(TPI)
T200 0.200” 3½ All Hughes H-90
Phone: 713-472-7360 • Fax: 713-472-7241 51


Proper thread height maximizes the performance of any threaded connection
and is a required inspection by the API. Thread height not only affects
the interchangeability but also the integrity of a thread assembly. Thread
height is the distance between the crest and the root, normal to the axis of
the thread and several issues can be easily detected by simply inspecting
thread height.
From detecting a chipped tool to preventing a connection from pulling apart

under critical loads, inspecting thread height is valuable. Thread Height
Gages inspect both internal and external thread height for a variety of thread
forms and provide immediate feedback on the integrity of your threads.

Gagemaker manufactures external thread height gages. Please specify the thread form when ordering. One contact point
(T072) included, please see chart on page 53 for the proper point for your connection. Standards sold separately, please
see page 53.
TH-3000-RSC External Thread Height, 0-25-0 Rotary Shouldered Connections .196" 3.230"

Gagemaker also manufactures internal thread height gages. Please specify the thread form when ordering. One contact point
(T072) included, please see chart on page 53 for proper point for your connection. Standards sold separately, please see
page 53.

TH-3009-RSC Internal Thread Height, 0-25-0, 1” Base Rotary Shouldered Connections .250" 1.750"
TH-3000-RSC
TH-3009-RSC

Gagemaker manufactures precision setting standards for thread height gages to API specifications. Please specify the type
of thread when ordering.
Model Description
10322-RS V-0.032, 2 TPF, 6 TPI to be used with T034 pt.
10551.5-RS V-0.055, 1.5 TPF, 6 TPI to be used with T072 pt.
10761.5-RS V-0.076, 1.5 TPF, 4 TPI to be used with T044 pt.
10H90-2 2” TPF H-90 Connection (90-V-0.050), 3.5 TPI to be used with T072 pt.
SL-H90 1¼" TPF, 3 TPI, 90-V-0.084 to be used with T072 pt.
Thread Height Contact Points

Gagemaker’s standard contact points are manufactured with carbide balls. Thread height gages require one contact point.
Points are sold individually.
Model Point Diameter Threads Per Inch Thread Form
T072 0.072" 3, 3.5, 4, 6 V-0.038R, V-0.055
T044 0.044” 4 V-0.050, V-0.076
T034 0.034” 5, 6 V-0.032, V-0.040
Phone: 713-472-7360 • Fax: 713-472-7241 53

Premium Connection Inspection
54 Thread Form Functional Size Pitch Diameter Thread Lead

PREMUIUM
CONNECTION
GAGES
Thread Height Pin Seal Ovality Torque Shoulder 55

Premium Connection Inspection Gages

As drilling requirements become more difficult
and as the demand for performance increases,
companies respond with new and improved
connection designs to meet those customer
demands. When companies design new
proprietary connections their first call is to
Gagemaker to discuss gauging requirements.
Over the past 25 years Gagemaker has designed
and built gauging solutions that ensure consistent
quality of premium connections. Many of the
gages have multiple applications and can be
shipped with short lead times. This
section of the catalog is focused on
those specialty gages that apply
directly to the premium or non-API
connection industry.
CONFIDENTIALITY STATEMENT
Gagemaker maintains confidentiality of all
proprietary connection designs through
signed agreements. Gagemaker will not
provide any quotations nor ship any gages or
setting standards to any unauthorized party.
Customers doing work for companies that
require proprietary gages will be required to
submit approval in writing prior to receiving
any quotes or gages.
56 Thread Form Functional Size Pitch Diameter Thread Lead

Thread Diameter Gages
Shoulder Location Gages
Pipe Straightness Gages
Seal Gages
Thread Runout Gages
Thread Height Pin Seal Ovality Torque Shoulder 57

Thread Diameter Gages

A variety of comparative style thread inspection gages are available for the
proprietary market. We provide gages that will meet your requirements
of size range, accuracy, affordability, and delivery.
MRP-1000
MRP-2001
MRP Pitch Diameter and Ovality Gages

This MRP series of pitch diameter gages detects variations in pitch diameter by the use of a gage shoe that rests on the
crest of the threads. Variation in diameter is detected by the indicator readout. These gages must be set to nominal size
with one of a variety of setting options offered. Refer to the setting option section that follows. All of these gages are API
approved for use on casing and tubing.

MRP-1000 Internal/External Pitch Diameter Gage 1½” - 4½”
MRP-1001 External Pitch Diameter Gage External 1½” - 4½”
MRP-1000-45 Internal Seal Diameter Gage. Contacts on a 45° angle. Arms- .375" upper, .375" lower Internal 1” - 4½”
MRP-1007 Internal Seal Diameter Gage. Contacts on a 45° angle. Arms- .740" upper, .500" lower Internal 1½” - 4½”
MRP-1008 Internal Seal Diameter Gage. Contacts on a 45° angle. Arms- .740" upper, .740" lower Internal 1⅜” - 4½”
MRP-1009 Internal Seal Diameter Gage. Contacts on a 45° angle. Arms- .740" upper, .500" lower Internal 1⅜” - 4½”
Internal/External Pitch Diameter Gage for Two Step Seal. Upper and lower arms are .740" Internal 2⅜” - 4½”
MRP-1012-TSS
diameter. Upper arm has standard travel of .150". Shipped with T105 pts. External 1¾” - 4½”
Internal/External Pitch Diameter Gage, Two Step Thread, w/ 1.030" Horseshoe standoff for Internal 2⅜” - 4½”
MRP-1012-TST front and rear measurements. Upper and lower arms have .740" diameter. Upper arm has
extended travel of .350" External 1¾” - 4½”

MRP-1500 Internal/External Pitch Diameter Gage, Solid Body
External 2⅞” - 4½”
MRP-2001 External Pitch Diameter Gage
MRP-2001-S External Pitch Diameter Gage, 4½” reach, Straight Blocks
MRP-2001-7 External Pitch Diameter Gage, 7” reach
MRP-1001
MRP-2511
MRP-3001
MRP-2002
MRP Pitch Diameter and Ovality Gages (Continued)

MRP-2002 Internal Pitch Diameter Gage, 4¼” reach
MRP-2002-S Internal Pitch Diameter Gage, 4¼” reach, Straight Blocks
MRP-2002-7 Internal Pitch Diameter Gage, 7” reach
Internal 3½” - 20”
MRP-2003 Internal/External Pitch Diameter Gage, 4¼” reach
2⅜” - 20”
MRP-2003-S Internal/External Pitch Diameter Gage, 4¼” reach, Straight Blocks
MRP-2003-7 Internal/External Pitch Diameter Gage, 7” reach Internal 3½” - 20”
MRP-2003-10 Internal/External Pitch Diameter Gage, 10” reach External 2⅜” - 20”
MRP-2511 External Pitch Diameter Gage, 4” reach
External 4½” - 9⅝”
MRP-2512 Internal Pitch Diameter Gage, 3⅜” reach
Internal 4½” - 9⅝”
MRP-2521 External Pitch Diameter Gage, 4” reach External 4½” - 13⅜”
MRP-2522 Internal Pitch Diameter Gage, 3⅜” reach Internal 4½” - 13⅜”
MRP-2513 Internal/External PD Gage, 3⅜” reach 4½” - 9⅝”
MRP-2523 Internal/External PD Gage, 3⅜” reach 4½” - 13⅜”
MRP-3001 External Pitch Diameter Gage, 3⅜” reach External 8⅝” - 24”
MRP-3002 Internal Pitch Diameter Gage, 3⅜” reach Internal 8⅝” - 24”
MRP-3003 Internal/External Pitch Diameter Gage, 3⅜” reach 8⅝” - 24”
MRP-3004 Internal/External Pitch Diameter Gage, 3⅜” reach 20” - 36”
MRP-3501 External Pitch Diameter Gage, w/ 6¼” reach External 8⅝” - 24”
MRP-3502 Internal Pitch Diameter Gage, w/ 6¼” reach Internal 8⅝” - 24”
MRP-3503 Internal/External PD Gage, w/ 6¼” reach 8⅝” - 24”
Gage parts and accessories can be found on page 105.
Phone: 713-472-7360 • Fax: 713-472-7241 59


These gages are often referred to as box depth or pin
length gages. They are designed to measure the linear DG-1212
distance from the face to the shoulder. Some gages are
comparative and preset with standards; others are direct
read and need no masters. All are available with a variety
of tips and contact points.
DG-1012
Digital Depth Gages

Our digital depth gages inspect the location of internal and external shoulders and grooves from the face of the pin and box
connections or other datum surfaces. The DG-1000 Series is available with the standard base, a 12" base, and a 20" base.
These gages are available in ranges: 0”-8”, 0”-12”, 0”-18”, and 0-24".
The standard gage (DG-1000 Series) is supplied with a 7” extension arm and a 0° and 45° contact point holder for use with
any #4-48 threaded contact point (one .072” contact point (T072) supplied unless otherwise requested). Longer extension
arms and other contact point configurations and adapters are available upon request. The 12” (DG-1200 Series) and 20”
(DG-2000 Series) gages include one double sided blade contact instead of a contact point and a contact point holder.
Digital depth gages do not require a setting standard. The gage is preset to zero on any flat surface and then applied to the
product. Actual length measurements display on the gage’s .0005”/.01 mm resolution digital readout. The digital readout
easily converts from inches to metric and has an SPC output.
Additional gages and accessories are available, see page 148. See pages 124-125 for additional contact points.

Depth Gage with Digital Display (in/mm)
DG-1008 Depth Gage w/ digital display (in/mm), .0005”/.01 mm resolution 0” - 8”
DG-1024 Depth Gage w/ digital display (in/mm), .0005”/.01 mm resolution 0" - 24"
Depth Gage with Digital Display and 12” Base (in/mm)
DG-1208 Depth Gage w/ digital display (in/mm), .0005”/.01 mm resolution, 12" base 0” - 8”
TS-4000
TS-1000
TSS-4000
DG-1012 with
DG-1000-R36 Stablizer
Digital Depth Gages (cont.)

Torque Shoulder Gages and Standards

Both the TS-1000 and TS-4000 series of gages accurately measure the distance between the primary and secondary torque
shoulders on both internal and external threaded connections. Used industry wide to measure the shoulder-to-shoulder
distance on premium tool joints and the face-to-seal location on premium couplings, Gagemaker TS gages are also perfectly
suited to locate grooves from various datum surfaces.
The TS gages require a setting standard. The gage is preset to the desired dimension and deviation is read from the gage’s
dial indicator.
The TS-1000 is supplied with a 6” extension arm, while the TS-1012 has a 10”extension arm. A 45° contact point holder for
use with any #4-48 threaded contact point is also supplied. One contact point included, please specify. Higher resolution
indicators, longer extension arms, other contact points, and adapters are available upon request.

TS-1000 Shoulder Depth Gage, Base length 6” 1” - 6”
TS-4000 Shoulder Depth Gage (Specify Taper) 2⅜” & Larger
TSS-1000 TS-1000 Setting Standard
Phone: 713-472-7360 • Fax: 713-472-7241 61


Identifying hooked or bent pipe ends is critical when machining or
swedging. These gages are direct reading and do not require setting SE-1000
masters. Used in a variety of applications, the most predominant use
relates to threading upset end pipe.
SG-8001
Saddle Gage
The Saddle Gage measures the amount of hook or bend at the end of a joint of pipe. The SG-8001 uses the RC-375 roller
contact. For replacements parts, please see page 147. Larger ranges available by special request only.

SG-8001 Saddle Gage 18” Max
Squareness Gage
The SQ-1630 Squareness Gage monitors the alignment of weld-on connectors to the pipe body. Requires setting by a
qualified standard. The SQ-1630S, our precision calibration square, is strongly recommended for best results. Standard
sold separately.

SQ-1636 Squareness Gage, 30” reach up to 36” diameter
SQ-1648 Squareness Gage, 30” reach up to 48” diameter
SQ-1630S Squareness Gage Standard 14” X 36” Square
Straight Edge Gage

The SE-1000 Straight Edge Gage measures the straightness of well tubing and casing. The gage price includes an
SES-1000 Standard. Replacement standards are available.

SE-1000 Straight Edge 36” - 64”
SES-1000 Replacement Straight Edge Standard
SQ-1648
SQ-1630S
LA-3600
Laser Alignment Gage

The Laser Alignment Gage ensures proper angular and parallel alignment during assembly of weld-on connectors.
Replacement parts are available.
Model Description Inside Diameter Range Outside Diameter Range

LA-3600 Laser Alignment Gage 11” - 55” 8” - 50”
Phone: 713-472-7360 • Fax: 713-472-7241 63

Seal Gages
Ensure the integrity of a premium connection’s seal by monitoring metal-
to-metal seal interference. Our seal diameter gages accurately check IT-510645
diameter and ovality to guarantee the quality of your product. Gages are
available for internal and external seal measurements.
MRP-2002-7-45
Box Seal Gage

Box Seal gages measure coupling and box seal diameters. Gage must be preset with a standard. For standards, please
contact customer service for information.

IT-5106-30 Box Seal Gage, points at 30° angle 6” Depth, 1½” - 10” Dia.
IT-5106-45 Box Seal Gage, points at 45° angle 6” Depth, 1½” - 10” Dia.
Box Seal Gage

Our MRP style box seal gage uses contact points to inspect criticial seal diameters at the back of premium connection boxes.

MRP-2002-7-45 Back-of-Box Seal Gage, MRP Style, 7” Depth, points at 45° angle 2⅜” - 20”
PN-3000 Series Pin Seal Diameter Gages

The PN-3000 Series of gages inspect critical pin seal diameters on premium connections ranging from 2⅜” - 25½”.
Gagemaker pin nose gages provide accurate measurements at the critical sealing point of the pin. The gage also inspects
seal tapers with the addition of stand-off plates.
The PN-3000 gages use precision interchangeable contact points that position on the seal at a fixed distance from the
connection face. Pin nose gage indicators have resoution of .0005”. Each model covers a specific range of connection sizes,
making the PN-3000 gages extremely versatile and economical. Before inspecting parts, these gages must be preset to a
nominal predetermined dimension using gage blocks, MIC TRAC, or frame standards. For additional parts and standoff
plates, please see pages 144-145.
PNI-3001
View A
X = Distance to Face
T = Contact Ball Diameter
A PNI-3001
PN-3000 Series Pin Nose Diameter Gages*

The PN series measure pin nose diameter using contact points. Specify the distance from the face of the connection to the measuring plane and desired
contact point diameter when ordering.
Model Description Range Model Description Range
PN-3001 Pin Nose Diameter Gage 0” - 5½” PN-3004 Pin Nose Diameter Gage 0” - 19½”
PN-3002 Pin Nose Diameter Gage 0” - 9½” PN-3005 Pin Nose Diameter Gage 0” - 25½”
PN-3003 Pin Nose Diameter Gage 0” - 13½”
*There is a separate cost to reposition the point standoff of PN-3000 Gages. Quotation available upon request.
PN-3000 Series Internal “Ball Contact” Seal Diameter Gages

The PNI series measure the internal ball contact seal diameter using contact points. Specify the distance from the face of the connection to the measuring
plane and desired contact point diameter when ordering.
PNI-3001-VMB Internal “Ball Contact” Seal Diameter Gage 2” - 5½”
PNI-3002-VMB Internal “Ball Contact” Seal Diameter Gage 2” - 9⅝”
PNI-3003-VMB Internal “Ball Contact” Seal Diameter Gage 2” - 13⅜”
PN-3000 Series 30° External Apex Diameter Gages

The PNA model gages measure only the external apex diameter of the connection.
PNA-3001-VMA 30° External Apex Diameter Gage, Anvils 2” - 4¼”
PNA-3002-VMA 30° External Apex Diameter Gage, Anvils 2” - 9⅝”
PNA-3003-VMA 30° External Apex Diameter Gage, Anvils 2” - 13⅜”
PN-3000 Series 30° Internal/External Apex Seal Diameter Gages

The PN-3000 Series 30° Internal/External Apex Seal Diameter gages measure both the internal and external diameters of the apex seal for the connection.
PN-31VM-30 30° Internal/External Apex Seal Diameter “V” Internal 2⅜” - 6⅝”, External 4"-6⅝”
PN-33VM-30 30° Internal/External Apex Seal Diameter “V” Internal 2⅜” - 14”, External 4" - 14"
Phone: 713-472-7360 • Fax: 713-472-7241 65

Thread Runout Gages

Maximize efficiency of the threading process by
ensuring the insert pulled out at the right time on
external threads. We manufacture runout gages for
both internal and external designs.
The run out gage is a three point gage having two fixed
points and one movable point attached to a balanced
dial indicator. Accuracy of the gage is verified by zeroing
the dial indicator on a flat surface.
BR-2001
Buttress Runout Gage

Buttress runout gages ensure proper thread pullout on runout type threads. Thread runout is the measurement of the
abruptness with which the buttress thread is terminated at the triangle end of the thread. A rapid pull-out of the cutting tool
results in a steep slope at the end of the thread causing high stress when the coupling is made-up.
Buttress runout gages have standard 1” and 2” point spacing. Includes one contact point (TBR) and shoes.

BR-2001 Buttress Runout Gage All Sizes
BRB-2001 Buttress Runout Base Only All Sizes
BRS-2001 Replacement Shoes (2)
Premium Setting Standards
Premium Round Standards
Premium Frame Standards
Premium Setting Standards

We manufacture master setting standards of various styles for numerous API as well as premium connections. Setting
standards duplicate critical dimensions that are then compared to the machined product. Standards can be as simple as
a single diameter or length or can combine diameters, lengths, seal groove locations, tapers, sealing surfaces and thread
gauging locations.
Standards are designed round as well as frame style. Setting surfaces may be cylindrical, conical, or flat and tapered.
The choice of style is very much an individual’s decision. All styles are manufactured to the same accuracy and precision.
All standards are put through a methodical process of rough machining, stress relieving, heat treat hardening, surface
coating, and finish grinding. The result of the process produces a master size standard with accuracies where required to
±.00025”.
Standards are calibrated and certified with traceability to NIST and come complete with a long form dimensional
certificate.
Please Note: Premium connection standards will only be manufactured for companies with the proper permission
or complete ownership of the product. Product drawings are required on the company’s title block with an authorized
signature. An NDA may be required to protect both parties as proprietary information is often involved.
Phone: 713-472-7360 • Fax: 713-472-7241 67

MUD MOTOR POWER SECTION
68 Stator Bore Measurement Core Alignment

MUD MOTOR
POWER
SECTION GAGES
Rotor Minor & Major Diameter Lobe Height 69

MUD MOTOR POWER SECTION
Maximize the Performance of Your Power Section

Drilling faster without stalls is critical to any drilling operation. The demands placed on the drilling
motor to achieve optimum performance require the proper fit between the rotor and the stator in the
power section. Gagemaker’s Power Section Gages ensure this fit meets these specifications.
With Gagemaker’s Stator Bore Diameter Gages, Rotor Major Diameter Gages, and Rotor Minor Diameter
Gages, you are armed to maintain the quality of the power section you produce. With this arsenal of
inspection gages, there’s not a motor or pump out there that can’t be inspected.
70 Stator Bore Measurement Core Alignment

Stator Bore Diameter Measurement
Rotor Major and Minor Diameter

Measurement
Rotor Minor & Major Diameter Lobe Height 71

Mud Motor Power Section
Stator Bore Diameter Measurement
Each of Gagemaker’s electronic Stator Bore Gages provides data collection and
data storage options of bore measurements. The gage is supplied with your choice of a
light duty netbook or a heavy duty notebook computer. Both provide the ability to enter a
serial number and store inspection data as a file for future reference. The data can also be
ported through a wireless link to a central computer for further processing.
Durable, accurate, easy to use, the Gagemaker Stator Bore Gages ensure your quality levels
remains at the highest level possible.
Electronic Stator Minor Bore Gages

The SBG series of gages determines a precise stator/rotor match by measuring the largest and smallest bore diameters.
Attaching or removing different height extension shoes achieves the gage’s range flexibility. Both gage models address any
pitch or lobe configuration.
The SBG-5000E measures diameters from 1.500” - 2.000”. Additional shoes are available for inspecting diameters larger
than 2.000” and up to 7.500” (see page 75).
The SBG-5000E includes three extension shoes, a interface box, a computer, measurement software, cables, and setting
standard base (standard not included).
Setting standards are sold separately, please see page 74.

Electronic Stator Bore Gage with interface box, computer, software, standard base, &
SBG-5000E 1.500” - 2.000”
SB-2100, SB-2110, SB-2120 extension shoes
Indicator Style Stator Minor Bore Gage

Gagemaker also offers two indicator based versions of the electronic SBG-5000 model. One setting standard assembly
without setting standard and three shoes are included. For diameters over 2.000”, additional shoes are required. Please
see page 75 for more shoes. Setting standards are sold separately, please see page 74.

SBG-5000A Stator Bore Gage with Analog Indicator and SB-2100, SB-2110, and SB-2120 extension shoes 1.500” - 2.000”
SBG-5000D Stator Bore Gage with Digital Indicator and SB-2100, SB-2110, and SB-2120 extension shoes 1.500” - 2.000”
SBG-5000E
Connection Cable
Interface Box &

Computer
SBG Flat
Standards
Phone: 713-472-7360 • Fax: 713-472-7241 73

Setting Standard Assembly

All Stator Bore Gages require presetting prior to part
inspection. The flat style standard provides an economical
method to accurately preset the gage. For smaller diameters,
round standards are preferable and are also available.
The assembly allows for fast and secure setup. The flat
style standards use a common base and top plate and use
interchangeable flat sizing blocks to achieve the setting
distance required. A speed nut locks the assembly together
quickly and securely.
Setting standards do not need to be sized to the exact bore of SBG Flat Standards
the stator’s bore. As long as the size of the standard is within

the measurement range of the gage, it can be used to preset
the gage.
SBG-5000A, SBG-5000D, and SBG-5000E Flat Standards

Setting Master Height Flat Standard Model Setting Master Height Flat Standard Model
1.600” SBFS-1600 4.640” SBFS-4640
1.727” SBFS-1727 4.750” SBFS-4750
1.800” SBFS-1800 4.900” SBFS-4900
2.062” SBFS-2062 5.060” SBFS-5060
2.187 SBFS-2187 5.150” SBFS-5150
2.375” SBFS-2375 5.240” SBFS-5240
2.598” SBFS-2598 5.350” SBFS-5350
2.700” SBFS-2700 5.420” SBFS-5420
2.736” SBFS-2736 5.500” SBFS-5500
2.900” SBFS-2900 5.600” SBFS-5600
3.080” SBFS-3080 5.750” SBFS-5750
3.150” SBFS-3150 5.850” SBFS-5850
3.245” SBFS-3245 5.960” SBFS-5960
3.303” SBFS-3303 6.050” SBFS-6050
3.400” SBFS-3400 6.140” SBFS-6140
3.425” SBFS-3425 6.250” SBFS-6250
3.500” SBFS-3500 6.375” SBFS-6375
3.625” SBFS-3625 6.500” SBFS-6500
3.750” SBFS-3750 6.600” SBFS-6600
3.976 SBFS-3976 6.750” SBFS-6750
4.000” SBFS-4000 6.860” SBFS-6860
4.160” SBFS-4160 6.950” SBFS-6950
4.250” SBFS-4250 7.040” SBFS-7040
4.370” SBFS-4370 7.220” SBFS-7220
4.520” SBFS-4520 7.375” SBFS-7375
4.567” SBFS-4567 7.450” SBFS-7450
Custom Sizes and Round Standards (usually for smaller diameters) are available as special requests.
Stator Bore Extension Shoes
Stator bore gage extension shoes provide flexibility to the
gauging package by simple changing a shoe or adjusting
a shoe when stator diameters change. Extension shoes SBG Brackets
are lightweight metal that are anodized to resist wear.
The style of extension shoe depends on the diameter SBG Risers
range being measured. Shoes are offered in several

lengths depending on the pitch of the stator lobes. It
is important that the shoe length be long enough to
contact a minimum of two points on the bottom and one
point on the top pad.
SBG Extension Shoes
SBG-5000A, SBG-5000D, and SBG-5000E Extension Shoes

Extension shoes are designed with flexibility in mind. The wide range of bores is balanced with the travel of the gage to
provide just the right fit for your stator. Select the shoe that best meets the minor diameter range of the stator to be inspected.

SB-2100 8” long extension shoe 1.500” – 1.650”
SB-2200 20” extension shoe (requires riser, see below)
SB-2150 .130” riser – SB-2200 extension shoe required 2.000” – 2.150”
SB-3500 20” extension shoe w/ brackets and adapter 2.600” – 3.500”
Phone: 713-472-7360 • Fax: 713-472-7241 75

Rotor Major & Minor Diameter

Today in the oil field industry, unique high-performance power sections MM-0-6
require accurate measurement tools for rotors and stators. Gagemaker
has designed several gages to measure a rotor’s major and minor
diameters. The Gagemaker Major Diameter T-Micrometer (T-MIC) is for
rotor major diameters (0” - 9”) and comes with bases ranging from 6”
to 24”. Gagemaker’s Minor Diameter Gage (MM) is for inspecting rotor
minor diameters (0” - 6”).
• The T-MIC’s frame is not only the strongest and most rigid available on the
market today, but the hardened and ground A-2 tool steel base rails are re-
grindable after years of service
• The T-MIC’s micrometer thimble mount allows for calibration and replacement
• The T-MIC’s micrometer thimble is available with a flat or radiused
micrometer stem
• Both the T-MIC and MM are durably constructed for the harshest work
environments
Rotor Minor Diameter (MM)

Gagemaker’s Minor Diameter gage was designed to measure a rotor’s minor diameter. The spiral lobes on the rotor produce a
valley, or minor diameter. The depth of the minor diameter from the major diameter requires a 1” travel indicator stem. The
range of the gage (0” - 6”) allows measuring most rotor sizes with only one gage. Ensuring the gage’s durability and long
life, Gagemaker’s design uses a heavy duty indicator stem and bearing housing to withstand side loads. Special sizes are
available.
Model Description Diameter Range
MM-0-6 Minor diameter micrometer 0" - 6"
Rotor Major Diameter Micrometer (T-MIC)

Due to high spirals on the lobes, conventional measurement gages cannot be used for measuring rotor major diameters.
Gagemaker developed the T-MIC to measure a rotor’s major diameter. The T-MIC’s base spans across two lobes on one
side of the centerline and uses a micrometer thimble on the other to measure the diameter. Instead of modifying an existing
micrometer, Gagemaker custom builds each T-MIC. Gagemaker’s rugged design far exceeds all others on the market today.
Special sizes are available, contact customer service for more information. Special sizes, metric thimbles, and metric
sizes are available.
Range Model Description
6” Base 8” Base 12” Base 18” Base 24” Base
0" - 1" TM6-0-1 TM8-0-1 TM12-0-1 TM18-0-1 TM24-0-1
1" - 2" TM6-1-2 TM8-1-2 TM12-1-2 TM18-1-2 TM24-1-2
2" - 3" TM6-2-3 TM8-2-3 TM12-2-3 TM18-2-3 TM24-2-3
3" - 4" TM6-3-4 TM8-3-4 TM12-3-4 TM18-3-4 TM24-3-4
T-MIC for Rotor,
4" - 5" TM6-4-5 TM8-4-5 TM12-4-5 TM18-4-5 TM24-4-5
½" wide base
5" - 6" TM6-5-6 TM8-5-6 TM12-5-6 TM18-5-6 TM24-5-6
6" - 7" TM6-6-7 TM8-6-7 TM12-6-7 TM18-6-7 TM24-6-7
7" - 8" TM6-7-8 TM8-7-8 TM12-7-8 TM18-7-8 TM24-7-8
8" - 9" TM6-8-9 TM8-8-9 TM12-8-9 TM18-8-9 TM24-8-9
TM12-1-2
TM12-2-3-352
Rotor Major Diameter T-Micrometer with Digital Micrometer

Gagemaker also offers our T-MICs with digital micrometers. The digital micrometer can transfer your data to a computer
via the included SPC output. Special sizes, metric thimbles, and metric sizes are available.

0" - 1" TM6-0-1-352 TM8-0-1-352 TM12-0-1-352 TM18-0-1-352 TM24-0-1-352
1" - 2" TM6-1-2-352 TM8-1-2-352 TM12-1-2-352 TM18-1-2-352 TM24-1-2-352
2" - 3" TM6-2-3-352 TM8-2-3-352 TM12-2-3-352 TM18-2-3-352 TM24-2-3-352
3" - 4" TM6-3-4-352 TM8-3-4-352 TM12-3-4-352 TM18-3-4-352 TM24-3-4-352 T-MIC for Rotor,
½” wide base with a
4" - 5" TM6-4-5-352 TM8-4-5-352 TM12-4-5-352 TM18-4-5-352 TM24-4-5-352
Mitutoyo 350-352-10 digital
5" - 6" TM6-5-6-352 TM8-5-6-352 TM12-5-6-352 TM18-5-6-352 TM24-5-6-352 micrometer and SPC output
6" - 7" TM6-6-7-352 TM8-6-7-352 TM12-6-7-352 TM18-6-7-352 TM24-6-7-352
7" - 8" TM6-7-8-352 TM8-7-8-352 TM12-7-8-352 TM18-7-8-352 TM24-7-8-352
8" - 9" TM6-8-9-352 TM8-8-9-352 TM12-8-9-352 TM18-8-9-352 TM24-8-9-352
Phone: 713-472-7360 • Fax: 713-472-7241 77

Custom Gages
78 Gage Design Serivces Prototype Gages

CUSTOM
GAGES
Unique Applications Dedicated Purpose Gages 79

Custom Gages
The Gages You Need, When You Need Them

For 25 years we have been solving gauging problems by offering custom gage designs. Customers
from all industries contact our design team for help with inspecting the impossible. We will find a
solution for your most intricate designs.
Using the most modern and up to date manufacturing equipment, our machinists turn unique designs
into reality by sculpting gages that meet the most demanding requirements.
We have designed and built several hundred special gages over the years. Let us introduce you to some
of the many products our design team has produced.
CONFIDENTIALITY STATEMENT
Gagemaker maintains confidentiality of all
proprietary connection designs through
signed agreements. Gagemaker will not
provide any quotations nor ship any gages or
setting standards to any unauthorized party.
Customers doing work for companies that
require proprietary gages will be required to
submit approval in writing prior to receiving
any quotes or gages.
Phone: 713-472-7360 • Fax: 713-472-7241 81
Measurement & Calibration
82 Part Measurement Gage Calibration

MEASUREMENT &
CALIBRATION
SYSTEMS
Gage Setting Master In House Calibration Systems 83

MIC TRAC 4000 In-House Precision

Gage Calibration System
Inspect Parts, Calibrate, and Track Gages
Choosing the Right

Step 1: Find what type of gages you have.
RG-7000 PD-8000 Calipers Depth Micrometers Indicators LG-5002 / LG-5003
Allen Lead Gage
OD
Micrometer
Gages
&
Indicators Calipers
for
Calibration ET-7000
PG-6000
IT-6000
Step 2: Determine which system you need.

MT-4000
(Accuracies to .00001”
(.254µ))
    
(>0.0001” Res.)
 
MT-3000
(Accuracies to .00002”       
(.508µ))
(>0.0005” Res.)
Step 3: Locate the fixures and accessories necessary.

Cal-Pak Calibration Package
Included with MT-4000 In-House Calibration System; can be purchased separately.
TF-1F TF-SA TF-CA TF-DG TF-IND TF-LG-2 TF-LG-3
Necessary
Fixtures &
Accessories
By Gage TF-SA to
Support
TF-1F TF-SA to
Support Long
TF-SS
Required
TF-1F TF-1F
Type RG-7000/ Calipers to Support
PG-6000 for Extended
Setting Probes
TF-SV TF-SS

MIC TRAC 3000 Shop Floor Gage Setting
and Part Measurement System
Measure Parts, Calibrate Hand-Held Gages, and Preset Indicator
Style Gages
Calibration System
TH-3000 PD-8000 Test Indicator Cylindrical Ring Threaded Plug Threaded Ring Cylindrical Plug Spline Gage Dial Bore Gage
(Solid Only) (NPT)
OD
Micrometer
MRP
Micrometer
Upper Arm Standard
ET-7000
IT-5000
  
(>0.0001” Res.)
     
  
(>0.0005” Res.)
Additional Calibration Accessories

These fixtures and accessories are not part of the CAL-PAK and must be purchased separately.
TF-VB TF-SV TF-SS TF-CR TF-2R TF-IT TF-TP TF-SP TF-VN

(included in
the CAL-PAK)
TF-1F TF-1F TF-1F MASTER

(included in
the CAL-PAK) RING
GAGE TF-2R
1-2-3 BLOCK
TF-TI BLOCKS
Required
with TF-SS 1-2-3 1-2-3 TF-1F
to Test TF-WH BLOCKS BLOCKS (included in
the CAL-PAK)
Indicator THREAD
Probes WIRES
INTERNAL
TF-TI GAGE BLOCK

Choosing the Right Calibration System

Most companies use various gages and tools that need calibrating, setting, and zeroing. Historically,
calibration caused multiple headaches from tracking, scheduling, shipping, and instrument downtime.
Now, companies who implement in-house calibration see a quick return on their investment with less
headaches and increased efficiency. Gagemaker systems are customizable, allowing you to create
your own calibration plan as simple or as comprehensive as you want. Our versatile, cost effective and
easy-to-use MIC TRAC calibration and gage setting systems produce accurate, repeatable, reproducible
results that you can trust.

MIC TRAC 3000
Shop Floor Gage Setting and
Part Measurement System

Calibration Accessories
Calibrator Gage

Shop Floor Gage Setting and Part

Measurement System
Employing a versatile bench mounted length measuring system
allows you to calibrate hand-held gages, preset indicator style
gages, and with the optional Force-Lok, measure parts. The
MIC TRAC 3000 Shop Floor Series Gage Setting and
Part Measurement System sets or zeros most
gages with the standard resolution of .00005”,
accuracies ranging from ±.0001” to ±.0004”
(traceable to the NIST) and the digital read
out is CE approved. The cost effective
Force-Lok feature improves repeatability
from operator to operator and is well suited for
a variety of environments including the shop floor.
MT-3012-50
MIC TRAC 3000 Shop Floor Gage Setting and Part Measurement System
MT-3000 Standard Base Units Without Force-Lok. Supplied with Digital Readout, TF-PL setting blocks, and shipping carton.
Model Description Accuracy Resolution Internal Range External Range

MT-3012-50 MIC TRAC Base Unit w/ DRO +.0001” .00005” 0” – 12” 1½” - 13½”
MT-3000 Standard Base Units With Force-Lok. Supplied with Digital Readout, TF-PL setting blocks, and shipping carton.

MT-3012F-50 MIC TRAC Base Unit w/ DRO +.0001” .00005” 0” – 12” 1½” - 13½”
A computer can be added for additional cost to any of the above MT-3000 models.
Setting Blocks are also available. Please see pages 132 -133 for more options.
Gage Setting, Part Measurement, &
Hand Tool Calibration System MT-3012F-50-USBC
Gagemaker offers the MT-3000 system with data capture

and document storage options. This system includes a
computer connected to the MIC TRAC and the CERTIFI
software for producing calibration documents. The base
unit ships with the Force-Lok feature that allows for
calibration of micrometer and rod standards.
MIC TRAC 3000 Gage Setting, Part Measurement, and Hand Tool Calibration System
MT-3000 Base Units With Force-Lok, Computer, MT-4-USB, TF-PL setting blocks, and a shipping carton.

MT-3012F-50-USBC MIC TRAC Base Unit with Force-Lok, Computer, & MT-4-USB +.0001” .00005” 0” – 12” 1½” - 13½”
Even higher resolution MT-3000 systems are also available.

Setting Blocks can be found on page 133.
Phone: 713-472-7360 • Fax: 713-472-7241 89


Establishing an in-house calibration service represents an investment in facilities, equipment
and trained personnel, but grants you total control over all of your calibration process as well
as saves you time and money over the long term. Gagemaker’s MIC TRAC 4000 Series In-
House Precision Gage Calibration System enables you to inspect parts, calibrate and track
a wide variety of gage styles including solid ring and plugs. This innovative high precision
metrology system with 1.00” travel guarantees extremely high accuracies to ±.00002 and
a resolution of .00001” (traceable to the NIST). This system also enables you to track and
maintain gage history as well as produce calibration certificates.
MIC TRAC 4000 In-House Precision Gage Calibration System

This package features the MIC TRAC/MT-4000 as a precision calibration system. The system accepts fixtures that inspect
and calibrate a wide range of gage diameters and thread pitches. The package includes all the equipment necessary to
calibrate precision handheld gages. Solid ring and plug inspection requires the purchase of additional accessories.
Package includes:
• MT-4012-10 MIC TRAC electronic adjustable measurement master, range 0” to 12”. Base unit is error
compensated to an accuracy of ±.00005”, resolution .00001”, travel 12.000”.
• Ultra precision scale with 1.00” travel, accuracy ±.00002”, and resolution .00001”.
• Computer with CERTIFI Calibration Software. CERTIFI produces calibration reports, has a recall database, and a
digital readout acquisition module. (MT-4-USB)
• CRC MT-4000 Calibration Reference card set-up procedures documenting calibrations with the Gagemaker system
• TF-2R: Carbide anvil set, ⅜” diameter
• TF-XYT: Adjustable X, Y & tilt support table for use with the MIC TRAC
• CAL-PAK: Assortment of fixtures designed to hold gages for calibration
• TDWIN Thread Disk software program: provides critical thread dimensions for manufacturing and inspection of
UN, Acme, Stub Acme, Metric, Buttress, and NPT threads.
• Torque wrench, 50 in. lb. (TW-50)
• AWH-100 bench-top tool holder with wrenches
• Reusable shipping container

PGC-12-W2 Precision Calibration Package 0" - 12"
PGC-24-W2 Precision Calibration Package with MT-4024-10 MIC TRAC 0” - 24”
MT-4012-10
MIC TRAC 4000 Base Units with Software

A MIC TRAC 4000 (MT-4000) base unit supplied only with digital readout software, a computer, TF-2R setting blocks,
and a shipping carton.
Model Description Accuracy Resolution Range

MT-4012-10 MIC TRAC Base Unit +.00005” .00001” 0” - 12”
MIC TRAC 4000 Ring and Plug Accessories*

Model Description
TF-1F Flat face setting blocks
TF-1F-C Carbide flat face setting blocks
TF-CP Ball contact holders, .500 ID measurement
TF-CR Set of 3 fixtures for measuring cylindrical ring gages and bores. CR-1 (.170”-.249”), CR-2 (.250”-.879”), CR-3 (.880”- Larger)
Internal threaded ring arm P.D. module (for solid threaded ring gages). Contains ball contacts and holders for 6, 8, 10, 12, 14, 16, 18,
TF-IT
and 20 pitch 60° threads (Diameter range 1.500" & Larger).
TF-SP-5 For vertically holding gage pins .062 - .500
TF-SP-75 For vertically holding gage pins .062 - .750
Calibration fixture for NPT, NPTF and ANPT tapered plug gages (includes wires for 27, 18, 14, and 11 ½ pitch threaded plugs).
TF-TP
(Requires TF-2R blocks)
TF-WSV Thread wire holder set. Contains wires and holders for 6, 8, 10, 12, 14, 16, 18, 20, 24, 28 and 32 pitch 60° threads.
TF-WSA Thread wire holder set. Contains wires and holders for 4, 5, 6, 8, 10, 12, 14 and 16 pitch Acme 29° threads.
TF-WSM Thread wire holder set. Contains wires and holders for .5, .6, .75, 1.0, 1.25, 1.5, 2.0, 3.0, 4.0 and 5.0 pitch metric 60° threads.
*Additional Thread Wire Holders and Cylindrical Ring and Thread Ring and Plug Gage accessories are on page 135.
Phone: 713-472-7360 • Fax: 713-472-7241 91

System Accessories
Gagemaker provides multiple fixtures and accessories that enable you to TF-IND
calibrate many types of hand-held gages using the MIC TRAC System.
TF-SA
Precision fixtures are designed to ensure the gage’s proper positioning
which is vital in securing the highest calibration accuracy and most
consistent measurement results.
TF-1F
The CAL-PAK collection of fixtures handles most standard Gagemaker TF-DG
gages, as well as calipers, dial indicators, test indicators, bore gages,
micrometers, micrometer standards and depth
TF-CA
gages (See pages 84-85 for calibration guide.)
TF-VB
The CAL-PAK can be used on both the MT-3000
TF-SV
and MT-4000, while other fixtures and accessories
are only applicable to the MT-3000. This huge
variety of accessories provides unmatched
versatility in measurement capabilities. TF-SS
TF-LG-2 TF-LG-3
CAL-PAK
MIC TRAC System Options

The following base units and accessories are available for additional requirements for either the MIC TRAC 3000 or
MIC TRAC 4000.
Model Description
Complete Calibration Package (All fixtures are also individually available.)
CAL-PAK
Includes: TF-1F, TF-CA, TF-DG, TF-IND, TF-LG-2, TF-LG-3, TF-SA, TF-SS, TF-SV, TF-VB, and storage case
TF-TI Test indicator calibration block*
TF-VN “V” blocks for calibration of axial travel probes and bore gages
TF-BA Base support block for setting dial bore gages**
TF-BI Base support plate for setting dial bore gages**
TF-CG Universal clamping fixture for calibration of indicators and gages*
*One TF-1F block required with this accessory, sold separately; **Two TF-1F blocks required with this accessory, sold separately
MIC TRAC 3000 Calibration Documentation

Model Description
Complete procedural documentation for the calibration of handheld inspection equipment including: O.D. & I.D. micrometers,
CRC-MT3000
calipers, depth micrometers, and more.
MIC TRAC 4000 Only Accessories

Model Description
Complete procedural documentation for the calibration of handheld inspection equipment including: O.D. & I.D. micrometers,
CRC-MT4000
calipers, depth micrometers, ring and plug gages, and more.
MT-4-USB Digital readout software module with digital data acquisition card w/ CERTIFI
TF-2R ⅜” diameter carbide anvil set
TF-SB Adjustable height support table
TF-SB-1 Bearing rail support base
TF-XYT Adjustable height support table, X-axis & Y-axis support base
Bench Calibrator
The Gagemaker calibrator gage, CG-1001/CG-1001E,
calibrates gages and indicators per AGD specification.
The CG-1001 uses a non-rotating spindle screw type
micrometer which reads directly to .0001” and can be
CG-1001
estimated to the closest .00005”.
Disassembling the gage is not required for calibration. The

vise assembly allows full vertical and horizontal adjustment
of the gage or indicator clamped in the vise jaws. During
calibration, an outboard arm and arm support allows for
larger gage assemblies to be securely supported.
Four supplied accessory fixtures will help speed up

calibration while maintaining accuracy. CG-1001E
Bench Calibrator
The CG-1001 is our standard bench calibrator, while the CG-1001E is our digital version which includes an SPC
output. The CG-1000 models are shipped in a durable custom shipping/storage case. Optional wooden storage
cases available.
Model Description Range Accuracy
CG-1001 Bench Calibrator .0001” Resolution, Mechanical ±.0001
CG-1001E Digital Bench Calibrator w/ SPC Output .00005”/.001 mm Resolution, Digital ±.00015
Bench Calibrator Fixtures

Bench Calibrator fixtures are included with the purchase of any bench calibrator, but are also offered individually
as additionals or replacements. These fixtures are used in calibration of select gages. Not all applicable gages
require a fixture; however, some gages require two fixtures.
Model Description Applicable Gages

CG-1001-A Bench Calibrator Fixture A Lead Gages, Internal Taper Gage (IT-6000)
CG-1001-B Bench Calibrator Fixture B Lead Gages, Internal Taper Gage (IT-6000)
CG-1001-C Bench Calibrator Fixture C MRP Series, Internal Thread Height (TH-3000 INT)
CG-1001-D Bench Calibrator Fixture D Indicators
Phone: 713-472-7360 • Fax: 713-472-7241 93

Calibration Services & Repair
94 Repairs Customer Service Calibration

CALIBRATION
SERVICES &
REPAIR
Gage Maintenance Technical Support 95


As an OEM, we offer professional calibration services for all the gages that we manufacture. Our repair
facility is fully equipped to service your gages and get them back to their original condition. We maintain
a complete inventory of replacement parts so we can provide a quick turnaround to keep your operation
running smoothly.
Gagemaker provides full service calibration, parts and repair on all MIC TRACS sold. At no extra charge, a
standard long form certificate is provided with all calibrations of MIC TRAC units. Calibration maintenance
often necessitates repair work. All repairs are quoted and require customer authorization prior to work
being done.
96 Repairs Customer Service Calibration

MIC TRAC Calibration Pricing
Calibration Services and Repair Rates
Calibration Certificates
Shipping & Care
Gage Maintenance Technical Support 97

MIC TRAC Calibration Pricing

Gagemaker provides full service calibration and repair on
all MIC TRACS sold. At no extra charge, a standard long
form certificate is provided with all calibrations of MIC
TRAC units.
Calibration maintenance may require repair work. All

repairs are quoted and require customer authorization prior
to work being done.
MIC TRAC Calibration and Repair

MIC TRAC Model Options
MIC TRAC Repair Rate
Model MIC TRAC Non MIC TRAC MIC TRAC with ($USD/hr)
Force-Lok Unit Force-Lok Unit SLEC File
MT-3012 319.00 389.00 533.00
MT-3024 389.00 457.00 617.00
MT-3036 457.00 527.00 687.00
MT-3048 527.00 595.00 899.00

100.00
MT-3060 595.00 735.00
MT-4012 533.00
MT-4024 617.00
MT-4036 687.00
MT-4048 899.00
All figures are in US Dollars.
Note 1: Gagemaker cannot guarantee the accuracy of a MIC TRAC unit, unless it is correctly packaged and shipped in a proper container. Prior to shipping,
please request a Return Authorization Number and instructions. Current cost for a standard MIC TRAC 3000 Series replacement shipping container is
$525.00. For all other containers, please call for a quotation. At no additional charge, all MIC TRAC units are supplied with a calibration certificate and
inch-by-inch error report.
Note 2: MT-2000 Series units are considered obsolete. We will calibrate MT-2000 Series unit, but we will not make any adjustments to improve the accuracy.
Call for pricing.
Note 3: Prices subject to change without notice.
Calibration Services and Repair Rates
Gagemaker offers calibration and repair services for many of its
products. Non-Gagemaker manufactured gages are quoted on an
individual basis. Please consult the table below for basic information
on our services.
For additional information on calibration and repair please contact

our customer service department.
Gages, Standards, and Inspection Equipment Calibration and Repair

Model Services Available Calibration Price ($USD)* Repair Rate ($USD/hr)*
Gage Calibration Equipment
TF-1F, TF-2R Setting Blocks Inspect flatness, parallelism, and size 65.00 75.00
TF-__T Taper Blocks Inspect taper and size 65.00 75.00
TF-__RSC Taper Block Set Inspect taper and size 98.00 75.00
TF-BX Setting Blocks Inspect angle and size 65.00 75.00
TF-TP Calibration Fixture Inspect and calculate new constant 87.00 75.00
CG-1001 Bench Calibrator Gage Verify micrometer travel 98.00 75.00
Thread Diameter Measurement Gage
RG-7000, PG-6000, MRP 5000 Diameter Gages Verify function and check parallelism 98.00 75.00
Large Diameter Measurement Gages
MIC 360 Gage Verify wheel diameter and gage function 318.00 75.00
API Gages/Standards
Lead Gages Calibrate indicator and verify function 43.00 75.00
Lead Standards Inspect step/step per specification 48.00 75.00
MRP Gages (MRP-1000, -2000, -3000) Inspect complete assembly 52.00 75.00
MRP Standard Set Inspect rod lengths per specifications 48.00 75.00
Thread Height Standards Inspect groove depths per specifications 38.00 75.00
Profile Gages Verify profile with optical comparator 38.00
Miscellaneous Equipment
Indicators Calibrate per specification 43.00 75.00
Thread Rolls Calibrate per specification 65.00
CMM Contract Inspection Per customer specification 175.00
*Prices subject to change without notice.
Note: ALL indicators or gages requiring repair will be quoted prior to any work being commenced. A purchase order or written approval for the repair work
must be submitted and received before any repairs will be undertaken.
Phone: 713-472-7360 • Fax: 713-472-7241 99

Gagemaker provides two types of Calibration
Certificates, the Certificate of Compliance and the
Certificate of Calibration.
The Certificate of Compliance (Short Form) is issued

to a product that has been inspected or verified to
meet minimum prescribed requirements. Usually, it is
applied to a fixed limit instrument with no adjustment
capability.
The Certificate of Calibration (Long Form)is issued to

products that have been inspected to the requirements
of a prescribed engineering document while providing
actual dimensional data.
Certificates of Compliance (Short Form Certificate) - A certificate of compliance is issued to a product that has been
inspected or verified to meet the minimum requirements of a prescribed engineering document or description. Normally
this type of certificate is applied to a fixed limit instrument that has no adjustment capability. No dimensional values are
included in this certificate.
The Compliance Certificate shall, as a minimum, include the following information: document title, name and address
of the our office where the certification took place, the unique identification of the certificate in the form of a document
number, name and address of the customer, identification of the method used to verify conformance, a description of
the item verified, the date that the verification was completed, reference to specific procedures used in the verification
process, verification results noted as Pass or Fail, the name and signature of the person authorized and responsible for
the verification, and evidence that the verification is traceable.
Certificates of Calibration (Long Form Certificate) - The long form certificate is issued to products that have been
inspected to requirements of a prescribed engineering document. The long form includes actual dimensional data with
tolerance limits as noted on the inspection drawings or certification documents. This level of certificate provides the
user with the exact dimensional data on the instrument when it left the Gagemaker facility.
The Calibration Certificate shall, as a minimum, include all items outlined for the Compliance Certificate with the addition
of: calibration results noted by required, actual and dimensional deviation of each feature inspected.
Certificate Type Price*
Certificate of Compliance – provided with all calibrations. Includes model number, serial
number, traceability to NIST or other governing body, inspector’s signature, calibration and
recalibration date. Profile gages are issued certificates of compliance only.
Certificate of Calibration – includes any documentation other than that listed under the
35.00
Certificate of Compliance
*Prices subject to change without notice.

Shipping & Care
Guide to Returning for Calibration or Repair
It is always best to return equipment in its original case and packaging. If you
no longer have the original carton or gage case, always package gages securely
in a carton and then secure in a second carton. If the gage has a sliding member,
always lock the member in a secure position prior to placing in a carton. Loose
components in a carton will damage the product in shipment and the cost of
repair will be more. Most shipments get turned upside down and often times
dropped during shipment, so plan to package for the worst conditions.
When returning products, please include the following:

• Contact name • RMA (Return Material Authorization)(if available) Note: Incomplete or insufficient
• Company name • Purchase Order or Work Order in the package information will cause a delay in
• Phone number • Description of the work to be completed the repair or calibration process.
• E-mail address
Basic Gage Care
• Keep all unprotected metal surfaces coated with light oil.
• Avoid dropping the gage or subjecting it to any vibration or impact.
• Keep the gage dry and away from any machine coolant spray.
• Do not force the movement of any of the mechanical parts. The

mechanics are designed to move freely.
• Keep the indicator face clean.
• Never oil the indicator, as the oil will attract dirt and dust
Phone: 713-472-7360 • Fax: 713-472-7241 101

Gagemaker Products
102 Automotive Oil & Gas Renewable Energies

GAGEMAKER
PRODUCTS
Aerospace Mechanical Engineering 103

Gagemaker Products
MRP-1000 MRP-202
Pitch Diameter and Ovality Gages
MRP Pitch Diameter and Ovality Gages
This MRP series of pitch diameter gages detects variations in pitch diameter by the use of a gage shoe
that rests on the crest of the threads. Variation in diameter is detected by the indicator readout. These
gages must be set to nominal size with one of a variety of setting options offered. All of these gages
are API approved for use on tubing and casing.

MRP-202 Internal Small Pitch Diameter Thread Gage Internal 1” - 2½”
MRP-1000 External/Internal Pitch Diameter Gage 1½” - 4½”
MRP-1001
MRP-1001 External Pitch Diameter Gage External 1½” - 4½”
Internal Seal Diameter Gage. Contacts on a 45° angle.
MRP-1012-TST MRP-1000-45 Internal 1” - 4½”
Arms: ⅜” upper arms, ⅜” lower arms
MRP-1007 Internal 1½” - 4½”
MRP-1012-TSS Arms: .740" upper, ½” lower
with contact points Internal Seal Diameter Gage. Contacts on a 45° angle.
MRP-1008 Internal 1⅜” - 4½”
Arms: .740" upper, .740” lower
MRP-1009 Internal 1⅜” - 4½”
Arms: .740" upper, .500” lower
Internal/External Pitch Diameter Gage for Two Step Seal. Upper
Internal 2⅜” - 4½”
MRP-1012-TSS and lower arms are .740” diameter. Upper arm has standard travel
External 1¾” - 4½”
of .150”. Shipped with T105 pts.
Internal/External Pitch Diameter Gage, Two Step Thread, w/ Internal 2⅜” - 4½”
MRP-1012-TST 1.030” Horseshoe standoff for front and rear measurements. Arms
MRP-2001
have .740” diameter. Upper arm has extended travel of .350” External 1¾” - 4½”
MRP-1500 Internal/External Pitch Diameter Gage, Solid Body
External 2⅞” - 4½”
MRP-2001 External Pitch Diameter Gage, 4½” reach
MRP-2001-S External Pitch Diameter Gage, 4½” reach, Straight Blocks
MRP-2002 MRP-2002 Internal Pitch Diameter Gage, 4¼” reach
MRP-2002-S Internal Pitch Diameter Gage, 4¼” reach, Straight Blocks
Internal 3½” - 20”
MRP-2003 Internal/External Pitch Diameter Gage, 4¼” reach
2⅜” - 20”
MRP-2511 MRP-2003-S Internal/External Pitch Diameter Gage, 4¼” reach, Straight Blocks
MRP-2003-7 Internal/External Pitch Diameter Gage, 7” reach Internal 3½” - 20”
MRP-2003-10 Internal/External Pitch Diameter Gage, 10” reach External 2⅜” - 20”
MRP-2511 External Pitch Diameter Gage, 4” reach
MRP-2512 External 4½” - 9⅝”
MRP-2521 External Pitch Diameter Gage, 4” reach External 4½” - 13⅜”
MRP-2512 Internal Pitch Diameter Gage, 3⅜” reach
Internal 4½” - 9⅝”
MRP-2522 Internal Pitch Diameter Gage, 3⅜” reach Internal 4½” - 13⅜”
MRP-2513 Internal/External PD Gage, 3⅜” reach 4½” - 9⅝”
MRP-2523 Internal/External PD Gage, 3⅜” reach 4½” - 13⅜”
1
-300 MRP-3001 External Pitch Diameter Gage, 3⅜” reach External 8⅝” - 24”
MRP
MRP-3002 Internal Pitch Diameter Gage, 3⅜” reach Internal 8⅝” - 24”
MRP-3003 Internal/External Pitch Diameter Gage, 3⅜” reach 8⅝” - 24”
MRP-3002 MRP-3004 Internal/External Pitch Diameter Gage, 3⅜” reach 20” - 36”
MRP-3501 External Pitch Diameter Gage, w/ 6¼” reach External 8⅝” - 24”
MRP-3502 Internal Pitch Diameter Gage, w/ 6¼” reach Internal 8⅝” - 24”
MRP-3503 Internal/External PD Gage, w/ 6¼” reach 8⅝” - 24”

MRP-1000, MRP-2000, & MRP-3000 Replacement Parts MRP-20BL
MRP-10BL
These are some of the most commonly requested replacement parts for the MRP gages. Additional
parts may be available.
Model Description
MRP-10BL MRP-1000 Block Set
MRP-10UA MRP-1000 Upper Arm
MRP-10LA MRP-1000 Lower Arm
MR
MRP-10WP MRP-1000 Wear Pad Set
X
PE
P-
20
0W
MRP-10SP MRP-1000 Spring Plunger WP
-3
-7
RP
MRP-20BL MRP-2000 Block Set
M
P
W
MRP-20CL MRP-2000 Series Arm Clamp - 20
RP
MRP-20LB-1 MRP-2000 Lower Block w/ 1” hole M
MRP-21UA MRP-2001 Upper Arm MRP-10WP

0UA
MRP-21LA MRP-2001 Lower Arm P-1
MR
MRP-21UA-7 MRP-2001 7” Upper Arm 0LA
P-1
MRP-21LA-7 MRP-2001 7” Lower Arm MR
MRP-21UA-10 MRP-2001 10” Upper Arm

2UA
MRP-21LA-10 MRP-2001 10” Lower Arm P-2
MR
MRP-.625I Int. Thread Shoe, ⅝” long, .125 Pivot Dimension
MRP-.625E Ext. Thread Shoe, ⅝” long, .250 Pivot Dimension 2LA
P-2
MRP-20mm Int./Ext. Thread Shoe, 20 mm long, .250 Pivot Dimension MR
MRP-20SP MRP-2000 Spring Plunger A

1U
MRP-22UA MRP-2002 Upper Arm P-2
MR
MRP-22LA MRP-2002 Lower Arm
MRP-22UA-7 MRP-2002 7” Upper Arm 1LA
P-2
-7
MRP-22UA-10 MRP-2002 10” Upper Arm UA
P -22

-7
MRP-20WPEX MRP-2000 Extended Wear Pad Set LA
P -22
MRP-20WP-7 MRP-2000 Wear Pad Set, 7” reach MR MRP-20KB
MRP-20WP-10 MRP-2000 Wear Pad Set, 10” reach
MRP-10KB-L
MRP-RAIL-12 MRP-2000 12” Cross Rail MRP-10KB-S
MRP-RAIL-18 MRP-2000 18” Cross Rail
MRP-RAIL-24 MRP-2000 24” Cross Rail
MRP-10KB-S MRP-1000 Knob-Short
MRP-10KB-L MRP-1000 Knob-Long MRP-.625I MRP-.625E
MRP-20KB MRP-2000 Knob MRP Rails

MRP-.750 Ext. Thread Shoe, ¾” long, .250 Pivot Dimension
MRP-.875 Int./Ext. Thread Shoe, ⅞” long, .250 Pivot Dimension
MRP-1.00 Int./Ext. Thread Shoe, 1” long, .250 Pivot Dimension MRP-.875 MRP-1.00
MRP-30WPEX MRP-3000 Extended Wear Pad Set
MRP-30RS-18 MRP-3000 Rail Set, 18” Max
MRP-30RS-24 MRP-3000 Rail Set, 24” Max
MRP-GSS MRP Gage Setting Stand MRP-GSS
Phone: 713-472-7360 • Fax: 713-472-7241 105

Gagemaker Products
Pin Rod Standard

MRP Gage Setting Standards
in Case
Rod Style Setting Standards for MRP-1000, 1500, 2000, 2500, 3000, & 3500
Rod style setting standards are designed to preset select MRP Series models for accurate inspection
of API threaded connections. Each set of standards consists of two precision ground rods that are
ground to lengths in accordance with API Specification 5B. The rod sets are securely attached together
and labeled with the connection size and serial number. The rods set the location of the thread shoe
and the distance between shoes for accurate inspection of threaded connections.
Thread Connection Size Pin Model Box Model

Type
2⅜” EUE MRP-238EUE-P MRP-238EUE-B
2⅞” EUE MRP-278EUE-P MRP-278EUE-B
Pin Rod EUE 3½” EUE MRP-312EUE-P MRP-312EUE-B
Standard “A”
4” EUE MRP-4EUE-P MRP-4EUE-B
4½” EUE MRP-412EUE-P MRP-412EUE-B

Type
2⅜” NUE MRP-238NUE-P MRP-238NUE-B
2⅞” NUE MRP-278NUE-P MRP-278NUE-B
NUE 3½” NUE MRP-312NUE-P MRP-312NUE-B
4” NUE MRP-4NUE-P MRP-4NUE-B
4½” NUE MRP-412NUE-P MRP-412NUE-B

Type
Pin Rod Standard “B” 4½” Buttress MRP-412B-P MRP-412B-B
5” Buttress MRP-5B-P MRP-5B-B
5½” Buttress MRP-512B-P MRP-512B-B
6⅝” Buttress MRP-658B-P MRP-658B-B
Buttress
10¾” Buttress MRP-1034B-P MRP-1034B-B
11¾” Buttress MRP-1134B-P MRP-1134B-B
13⅜” Buttress MRP-1338B-P MRP-1338B-B
Line Pipe standards are available. All Special Orders, Non-Standard API or Premium Connection
Setting Standards are extra. Please contact for more information.

Rod Style Setting Standards for MRP-1000, 1500, 2000, 2500, 3000, & 3500 Box Rod Standard
(Cont.) in Case

Type
4½” 8R LTC MRP-412L-P MRP-412L-B
5” 8R LTC MRP-5L-P MRP-5L-B
5½” 8R LTC MRP-512L-P MRP-512L-B
6⅝” 8R LTC MRP-658L-P MRP-658L-B
LTC 7” 8R LTC MRP-7L-P MRP-7L-B
7⅝” 8R LTC MRP-758L-P MRP-758L-B
8⅝” 8R LTC MRP-858L-P MRP-858L-B Box Rod
Standard “A”
9⅝” 8R LTC MRP-958L-P MRP-958L-B>P110 or MRP-958L-B<P110
20” 8R LTC MRP-20L-P MRP-20L-B>JK55 or MRP-20L-B<JK55

Type
4½” - 9.50# 8R STC MRP-412S-9-P MRP-412S-9-B
4½” - Other 8R STC MRP-412S-O-P MRP-412S-O-B
5” - 11.50# 8R STC MRP-5S-11-P MRP-5S-11-B
5” - Other 8R STC MRP-5S-O-P MRP-5S-O-B
5½” 8R STC MRP-512S-P MRP-512S-B
6⅝” 8R STC MRP-658S-P MRP-658S-B
7” - 17.00# 8R STC MRP-7S-17-P MRP-7S-17-B
7” - Other 8R STC MRP-7S-O-P MRP-7S-O-B
STC 8⅝” - 24.00# 8R STC MRP-858S-24-P MRP-858S-24-B
8⅝” - Other 8R STC MRP-858S-O-P MRP-858S-O-B
9⅝” 8R STC MRP-958S-P MRP-958S-B>P110 or MRP-958S-B<P110
10¾” - 32.75# 8R STC MRP-1034S-32-P MRP-1034S-32-B
10¾” - Other 8R STC MRP-1034S-O-P MRP-1034S-O-B>P110 or MRP-1034S-O-B<P110 Box Rod
Standard “B”
11¾” 8R STC MRP-1134S-P MRP-1134S-B>P110 or MRP-1134S-B<P110
13⅜” 8R STC MRP-1338S-P MRP-1338S-B>P110 or MRP-1338S-B<P110
16” 8R STC MRP-16S-P MRP-16S-B
20” 8R STC MRP-20S-P MRP-20S-B>JK55 or MRP-20S-B<JK55
Line Pipe standards are available. All Special Orders, Non-Standard API or Premium Connection
Setting Standards are extra. Please contact for more information.
Phone: 713-472-7360 • Fax: 713-472-7241 107

Gagemaker Products
Frame Style Setting Standards for MRP-1000, 1500, 2000, 2500, 3000, &
3500 Series*
These frame style setting standards are designed to preset multiple models of the MRP Series
gages for accurate inspection of API threaded connections. These standards consist of a rigid,
non-adjustable steel block precision machined to proper size to tolerances of ±.0003”. Round style
standards, smaller than 2⅜", are available as specials (contact us directly for more information).
When ordering, please specify the gage to be used.
Thread
Connection Size Pin Model Box Model
MRP Series Type
Frame Style Standards 2⅜” NUE FSTD-238N-P2 FSTD-238N-B2
2⅞” NUE FSTD-278N-P2 FSTD-278N-B2
NUE
3½” NUE FSTD-312N-P2 FSTD-312N-B2
Thread
Type
2⅜” EUE FSTD-238E-P2 FSTD-238E-B2
2⅞” EUE FSTD-278E-P2 FSTD-278E-B2
EUE
3½” EUE FSTD-312E-P2 FSTD-312E-B2
Thread
Type
MRP Series External 4½” Buttress FSTD-412B-P2 FSTD-412B-B2
Frame Style Standard 5” Buttress FSTD-5B-P2 FSTD-5B-B2
5½” Buttress FSTD-512B-P2 FSTD-512B-B2
6⅝” Buttress FSTD-658B-P2 FSTD-658B-B2
7” Buttress FSTD-7B-P2 FSTD-7B-B2
8⅝” Buttress FSTD-858B-P2 FSTD-858B -B2
Buttress
10¾” Buttress FSTD-1034B-P2 FSTD-1034B-B2
11¾” Buttress FSTD-1134B -P2 FSTD-1134B-B2
13⅜” Buttress FSTD-1338B-P2 FSTD-1338B-B2
MRP Series Internal
Frame Style Standard Thread
Type
4½” 8R LTC FSTD-412L-P2 FSTD-412L-B2
5” 8R LTC FSTD-5L-P2 FSTD-5L-B2
6⅝” 8R LTC FSTD-658L-P2 FSTD-658L-B2
LTC 7” 8R LTC FSTD-7L-P2 FSTD-7L-B2
9⅝” 8R LTC FSTD-958L-P2 FSTD-958L-B2>P110 or FSTD-958L-B2<P110
20” 8R LTC FSTD-20L-P2 FSTD-20L-B2>JK55 or FSTD-20L-B2<JK55
*Standards for Tubing and Casing Connections for MRP-5000 gages are available. Special Orders, Non
Standard API, Round or Premium Connection Setting Standards are available.

Frame Style Setting Standards for MRP-1000, 1500, 2000, 2500, 3000, &
3500 Series* (Cont.)
Thread
Type
4½” - 9.50# 8R STC FSTD-412S-9-P2 FSTD-412S-9-B2
4½” - Other 8R STC FSTD-412S-O-P2 FSTD-412S-O-B2
5” - 11.50# 8R STC FSTD-5S-11-P2 FSTD-5S-O-B2
5” - Other 8R STC FSTD-5S-O-P2 FSTD-5S-O-B2 SSTD-P-LTC
5½” 8R STC FSTD-512S-P2 FSTD-512S-B2
6⅝” 8R STC FSTD-658S-P2 FSTD-658S-B2
7” - 17.00# 8R STC FSTD-7S-17-P2 FSTD-7S-17-B2
7” - Other 8R STC FSTD-7S-O-P2 FSTD-7S-O-B2
STC 8⅝”- 24.00# 8R STC FSTD-858S-24-P2 FSTD-858S-24-B2
8⅝” - Other 8R STC FSTD-858S-O-P2 FSTD-858S-O-B2
9⅝” 8R STC FSTD-958S-P2 FSTD-958S-B2>P110 or FSTD-958S-B2<P110
10¾”- 32.75# 8R STC FSTD-1034S-32-P2 FSTD-1034S-32-B2
10¾”- Other 8R STC FSTD-1034S-O-P2 FSTD-1034S-O-B2>P110 or FSTD-1034S-O-B2<P110
11¾” 8R STC FSTD-1134S-P2 FSTD-1134S -B2>P110 or FSTD-1134S-B2<P110
13⅜” 8R STC FSTD-1338S-P2 FSTD-1338S-B2>P110 or FSTD-1338S-B2<P110
16” 8R STC FSTD-16S-P2 FSTD-16S-B2
20” 8R STC FSTD-20S-P2 FSTD-20S-B2>JK55 or FSTD-20S-B2<JK55 MRP-2000 on pin step
standard
*Standards for Tubing and Casing Connections for MRP-5000 gages are available. Special Orders, Non
Standard API, Round or Premium Connection Setting Standards are available.
Step Style Setting Standards for MRP-1000, 1500, 2000, & 2500 Series
The step style setting standards are designed to preset several models of the MRP Series gages for
accurate inspection of API threaded connections. These standards consist of a rigid, non-adjustable
steel block precision machined to proper size to tolerances of ±.0003”.
Thread Type Connection Sizes Pin Model Box Model

EUE 2⅜” - 4½” SSTD-P-EUE SSTD-B-EUE
NUE 2⅜” - 4½” SSTD-P-NUE SSTD-B-NUE
Line Pipe 2 ½- 10” SSTD-P-LP SSTD-B-LP
LTC 4½” - 9⅝” SSTD-P-LTC SSTD-B-LTC
4½” - 6⅝” SSTD-P-STC1 SSTD-B-STC1
STC 7” - 8⅝” SSTD-P-STC2 SSTD-B-STC2
10¾” - 13⅜” SSTD-P-STC3 SSTD-B-STC3
4½” - 7⅝” SSTD-P-BTC1 SSTD-B-BTC1
Buttress
8⅝” - 13⅜” SSTD-P-BTC2 SSTD-B-BTC2 Pin and Box
Step Standards
Phone: 713-472-7360 • Fax: 713-472-7241 109

Gagemaker Products
Tapered Thread Functional Size

MRP-5000 Functional Roll Gages for Tapered Threads
MRP-5001
The MRP-5000 series of thread pitch diameter gages use hardened and ground thread rolls to inspect
functional size of tapered threaded connections. The MRP-5000 gages are adjustable within a size
range and have interchangeable thread rolls for inspection of all API thread forms. The gages must
be preset to size using one of a variety of setting methods available. Refer to the setting options that
follow. Please specify preferred taper arms when ordering. Thread rolls and standards are sold
separately.
Model Description Resolution Range

MRP-501* External Sizes by Taper, Single Taper* .0001” 1” - 2¼”
MRP-502* Internal Sizes by Taper, Single Taper* .0001” 1” - 2¼”
MRP-5001 Internal/External Tubing and Casing Connections .0005” 2⅜” - 5½”
MRP-5002 Internal/External Tubing and Casing Connections .0005” 2⅜” - 13⅜”
MRP-5003 Internal/External Tubing and Casing Connections .0005” 13⅜” - 20”
MRP-5004 Internal/External Tubing and Casing Connections .0005” 2⅜” - 9⅝”
*Please specify taper when ordering. Built to one specific taper. One taper per gage. Set of thread rolls included.
MRP-5000 Replacement Parts

MRP-5001
Side View Model Description*
MRP5-10 Positioning Springs (Set of 2)
MRP5-11 Retainer Washers (Set of 2)
MRP5-12 Lock Screws (Set of 2)
MRP5-75T ¾” TPF Taper Arms (Set of 2)
MRP5-10T 1” TPF Taper Arms (Set of 2)
*Taper arm price does not include thread rolls.
To determine the thread rolls required, refer to thread roll chart below.
MRP-5000 MRP-5000 Thread Rolls

Series
Taper Arm The product thread form determines the thread roll set that will be used. Thread roll sets consist of
two rolls supplied in a labeled storage tube.
Model Description
TR-8R All API 8 Round Tubing
TR-10R All API 10 Round Tubing
MRP-502
TR-8LP 8V API Line Pipe
TR-11LP 11½ TPI V API Line Pipe
TR-B10I API Buttress Casing, Internal, 16” - 20”
TR-B10E API Buttress Casing, External, 16” - 20”
TR-B75 API Buttress Casing, 4½” - 13⅜”
TR-BL Blank thread roll set

Frame Style Setting Standards
MRP-5000 Series Setting Standards for Tubing and Casing Connections*
These frame style setting standards are designed to preset MRP-5000 Series gages for accurate
inspection of API threaded connections. These standards consist of a rigid, non-adjustable steel block
precision machined to proper size to tolerances of ±.0003”.
Thread
Type
2⅜” NUE FSTD-238N-P5 FSTD-238N-B5
2⅞” NUE FSTD-278N-P5 FSTD-278N-B5
NUE Setting an MRP-5001 with
3½” NUE FSTD-312N-P5 FSTD-312N-B5 Frame Style Standards
2⅜” EUE FSTD-238E-P5 FSTD-238E-B5
2⅞” EUE FSTD-278E-P5 FSTD-278E-B5
EUE
8⅝” Buttress FSTD-858B-P5 FSTD-858B -B5
Buttress
10¾” Buttress FSTD-1034B-P5 FSTD-1034B-B5
11¾” Buttress FSTD-1134B -P5 FSTD-1134B-B5
13⅜” Buttress FSTD-1338B-P5 FSTD-1338B-B5
16” Buttress FSTD-16B-P5 FSTD-16B-B5 MRP-5000 Frame Style Box Standard
5” 8R LTC FSTD-5L-P5 FSTD-5L-B5
LTC 7” 8R LTC FSTD-7L-P5 FSTD-7L-B5
9⅝” 8R LTC FSTD-958L-P5 FSTD-958L-B5>P110 or FSTD-958L-B5<P110
20” 8R LTC FSTD-20L-P5 FSTD-20L-B5>JK55 or FSTD-20L-B5<JK55
4½” - 9.50# 8R STC FSTD-412S-9-P5 FSTD-412S-9-B5
4½” - Other 8R STC FSTD-412S-O-P5 FSTD-412S-O-B5
5” - 11.50# 8R STC FSTD-5S-11-P5 FSTD-5S-O-B5
5½” 8R STC FSTD-512S-P5 FSTD-512S-B5
MRP-5000 Frame Style Pin Standard
7” - 17.00# 8R STC FSTD-7S-17-P5 FSTD-7S-17-B5
STC 8⅝”- 24.00# 8R STC FSTD-858S-24-P5 FSTD-858S-24-B5
8⅝” - Other 8R STC FSTD-858S-O-P5 FSTD-858S-O-B5
9⅝” 8R STC FSTD-958S-P5 FSTD-958S-B5>P110 or FSTD-958S-B5<P110
10¾”- 32.75# 8R STC FSTD-1034S-32-P5 FSTD-1034S-32-B5
10¾”- Other 8R STC FSTD-1034S-O-P5 FSTD-1034S-O-B5>P110 or FSTD-1034S-O-B5<P110
11¾” 8R STC FSTD-1134S-P5 FSTD-1134S -B5>P110 or FSTD-1134S-B5<P110
13⅜” 8R STC FSTD-1338S-P5 FSTD-1338S-B5>P110 or FSTD-1338S-B5<P110
16” 8R STC FSTD-16S-P5 FSTD-16S-B5
20” 8R STC FSTD-20S-P5 FSTD-20S-B5>JK55 or FSTD-20S-B5<JK55
*Rotary Shouldered Connection pin and custom standards are available. Please contact Gagemaker for
more information.
Phone: 713-472-7360 • Fax: 713-472-7241 111

Gagemaker Products
Pitch Diameter
Pitch Diameter is one of the most important inspections for nearly any thread. In the past, pitch diameter
was ignored as long as the ring or plug gage threaded. Now, using Gagemaker gages, you have more
control over threading connections of marginal quality. The process of locating and measuring the pitch
LPB-4-2-50
diameter takes less than a minute. This minute of inspection quickly decides the difference between
good and bad.
Rotary Shouldered Connection Pitch Diameter Location Profiles

Pitch diameter location templates locate the point on the connection where the pitch diameter is
measured. When applied properly to the connection, the template’s special layout mark indicates the
proper thread to measure the pitch diameter. A simple mark with a felt tip marking pen allows the
LPB-3.5-2-H9 operator or inspector to accurately position the gage and read a diameter. Please specify the threads
per inch (TPI), taper per foot (TPF), and thread form when ordering.
Box Profiles
Model Description
LPB-3-1.25-SLH9 Box Location Profile template for 3 TPI, 1.25 TPF, 90-V-0.084 thread form
LPB-3.5-2-H9 Box Location Profile template for 3.5 TPI, 2 TPF, 90-V-0.050 thread form
LPB-3.5-3-H9 Box Location Profile template for 3.5 TPI, 3 TPF, 90-V-0.050 thread form
LPB-4-1.5-76 Box Location Profile template for 4 TPI, 1.50 TPF, V-0.076 thread form
LPP-3.5-2-H9
LPB-4-2-38 Box Location Profile template for 4 TPI, 2 TPF, V-0.038R thread form
LPB-4-2-50 Box Location Profile template for 4 TPI, 2 TPF, V-0.050 thread form
LPB-4-3.375-A094 Box Location Profile template for 4 TPI, 3.375 TPF, A-0.094 thread form
LPP-6-1.5-55
Pin Profiles
Model Description
LPP-3-1.25-SLH9 Pin Location Profile template for 3 TPI, 1.25 TPF, 90-V-0.084 thread form
LPP-3.5-2-H9 Pin Location Profile template for 3.5 TPI, 2 TPF, 90-V-0.050 thread form
LPP-3.5-3-H9 Pin Location Profile template for 3.5 TPI, 3 TPF, 90-V-0.050 thread form
LPP-4-1.5-76 Pin Location Profile template for 4 TPI, 1.50 TPF, V-0.076 thread form
LPP-4-2-38 Pin Location Profile template for 4 TPI, 2 TPF, V-0.038R thread form
LPP-4-2-50 Pin Location Profile template for 4 TPI, 2 TPF, V-0.050 thread form
LPP on a Pin with blue line marking LPP-4-3-38 Pin Location Profile template for 4 TPI, 3 TPF, V-0.038 thread form
proper thread
LPP-4-3.375-A094 Pin Location Profile template for 4 TPI, 3.375 TPF, A-0.094 thread form
LPP-6-1.0-55 Pin Location Profile template for 6 TPI, 1.0 TPF, V-0.055 thread form
LPP-6-1.5-55 Pin Location Profile template for 6 TPI, 1.50 TPF, -0.055 thread form
LPB on a Box cutout

RSC Box Pitch Diameter Gages
Gagemaker’s internal diameter and groove gages measure variation in internal bore diameters. Pitch
diameter gages are shipped with two 0.144” diameter contact points (T144) as standard. Setting
dimensions for the pitch diameter gages are provided by the TDWIN Taper software. Software is
sold separately (see page 129). Refer to page 124 for the proper contact point for your particular
connection.

IT-5104-RSC Internal Diameter/Groove Gage, 4” (101.6 mm) Depth 1½” - 10” (38.1 mm - 254 mm) Dia.
IT-5104-04 Replacement Lower Arm 4¼” (107.9 mm) Length
IT-5104-RSC
RSC Pin Pitch Diameter Gages
The ball pitch diameter gages gages indicate the pitch diameter size of the product’s external thread.
The gages are adjustable within a size range and use interchangeable contact points to measure
different pitch threads. Gages are shipped with two 0.144” diameter contact points (T144) as
standard. Reference page 124 for other connection specific contact points.

PD-8001-RSC External Ball Pitch Diameter Gage 0” - 6” (0 mm - 152.4 mm)
PD-8002-RSC External Ball Pitch Diameter Gage 6” - 12” (152.4 mm - 304.8 mm)
Rod Style Setting Standards

Rod style setting standards are used to set many JSS gages. Specify size or specific connection
when ordering. Ex.: RS-3.5-DS-B, RS-NC77-B, RS-2.375-REG-B.
Model Description
RS-__-DS-B Rod Standard for Double Streamline (3.5" - 5.5"), Box PD-8001-RSC
RS-__-DS-P Rod Standard for Double Streamline (3.5" - 5.5"), Pin
RS-__-EF-B Rod Standard for External Flush (2.375" - 4.5"), Box
RS-__-EF-P Rod Standard for External Flush (2.375" - 4.5"), Pin
RS-__-FH-B Rod Standard for Full Hole (2.875" - 6.625"), Box
RS-__-FH-P Rod Standard for Full Hole (2.875" - 6.625"), Pin
RS-__-H9-B Rod Standard for H-90 (3.5" - 8.625"), Box
RS-__-H9-P Rod Standard for H-90 (3.5" - 8.625"), Pin
RS-__-IF-B Rod Standard for Internal Flush (2.375" - 6.625"), Box
RS-__-IF-P Rod Standard for Internal Flush (2.375" - 6.625"), Pin
RS-NC__-B Rod Standard for API Numbered Connections (#10 - #77), Box
RS-NC__-P Rod Standard for API Numbered Connections (#10 - #77), Pin
RS-___-OH-B Rod Standard for Open Hole (2.375" - 4.5"), Box
RS-___-OH-P Rod Standard for Open Hole (2.375" - 4.5"), Pin
RS-__-PAC-B Rod Standard for PAC (2.375" - 3.5"), Box
RS-__-PAC-P Rod Standard for PAC (2.375" - 3.5"), Pin
RS-__-SH-B Rod Standard for Slim Hole (2.375" - 4.5"), Box
RS-__-SH-P Rod Standard for Slim Hole (2.375" - 4.5"), Pin
RS-__-SLH9-B Rod Standard for Slimline H-90 (2.375" - 3.5"), Box
RS-__-SLH9-P Rod Standard for Slimline H-90 (2.375" - 3.5"), Pin
RS-__-REG-B Rod Standard for Regular (1.0" - 8.625"), Box
RS-__-REG-P Rod Standard for Regular (1.0" - 8.625"), Pin
RS-__-XH-B Rod Standard for Xtra Hole (2.875" - 5.0"), Box
RS-__-XH-P Rod Standard for Xtra Hole (2.875" - 5.0"), Pin
RS-__-WO-B Rod Standard for Wide Open (2.375" - 4.5"), Pin
RS-__-WO-P Rod Standard for Wide Open (2.375" - 4.5"), Pin Setting PD-8001-RSC with Rod Standard
Phone: 713-472-7360 • Fax: 713-472-7241 113

Gagemaker Products
Straight Thread External Pitch Diameter Gages (0” to 72” Diameters)

The ball pitch diameter gages or “GO/NO GO” gages indicate the pitch diameter size of the product’s
external thread. The gages are adjustable within a size range and use interchangeable contact points
to measure different pitch threads. Setting dimensions for the pitch diameter gages are provided by
the TDWIN software. Software (see page 128) and contact points (see pages 124-125) are sold
PD-8001
separately. Indicators have a ½” travel and .0005” resolution, and higher resolutions are available.
Models PD-8004 through PD-8016 include a custom wood case.

PD-8000 External Ball Pitch Diameter Gage 0” - 2⅜” (0 mm - 60.3 mm)
PD-8001 External Ball Pitch Diameter Gage 0” - 6” (0 mm - 152.4 mm)
PD-8002 External Ball Pitch Diameter Gage 6” - 12” (152.4 mm - 304.8 mm)
PD-8006 External Ball Pitch Diameter Gage 16” - 20” (406.4 mm - 508 mm)
PD-8008 External Ball Pitch Diameter Gage 20” - 24” (508 mm - 609.6 mm)
PD-8010 External Ball Pitch Diameter Gage 24” - 28” (609.6 mm 711.2 mm)
Straight Thread Internal Pitch Diameter Gages (1½” to 27” Diameters)

The ball pitch diameter gages or “GO/NO GO” gages indicate the pitch diameter size of the product’s
internal threads. The gages are adjustable within a size range and use interchangeable contact
PD-6000
points to measure different pitch threads. Setting dimensions for the pitch diameter gages are
provided by the TDWIN software (sold separately, see page 128). Higher resolution indicators are
available. All of the PD-6000 series are sold without contact points. See pages 124-125 for contact
points.
Model Description Travel Resolution Range

PD-6000 Internal Pitch Diameter Gage (“V” & Acme) ½" .0005" 1½” - 9”
PD-6000-07 Replacement Arm Set 4½” length
PD-6001 Internal Pitch Diameter Gage ½" .0005" 6” - 24”
PD-6001 Replacement Parts (Extensions have #10-32 threads)

Model Description Length
PD-6001-PD4M Cap
4-2-617 Indicator Base - Mitutoyo Indicator Only
PD-6001-CBA Cap and Base Assembly
PD-6001-PD3 Adjustment Cap Lock Nut
PD-6001-PD2 Adjustment Cap
PD-6001-PD1 Contact Point Adapter
PD-6001-PDA Extension Rod .430”
PD-6001-PDB Extension Rod .860”
PD-6001-PDC Extension Rod 1.290”
PD-6001-PDD Extension Rod 1.720”
PD-6001-PDE Extension Rod 3.440”
PD-6001-PDF Extension Rod 5.590”
PD-6001 and Extension Rods PD-6001-PDG Extension Rod 7.740”
PD-6001-PDH Extension Rod 10.320”
PD-6001-12E PD-6001 Internal Pitch Diameter Extension Rod 12”

Thread Taper
Gagemaker’s external taper gages inspect variation in connection taper. External taper gages are
shipped with .072” diameter contact points as standard. Refer to page 124 for the proper contact point
for your particular connection. All indicators are .001” resolution, but higher resolution indicators are
available for some models.
ET-7001
Model Description Range Model Description Range
ET-7001 External Taper, ½” travel 0” - 6” ET-7005 External Taper, 1” travel 0” - 16”
ET-7002 External Taper, ½” travel 0” - 10” ET-7006 External Taper, ½” travel 16” - 24”
ET-7003 External Taper, 1” travel 0” - 10” ET-7007 External Taper, 1” travel 16” - 24”
ET-7004 External Taper, ½” travel 0” - 16”

Gagemaker’s internal taper gages measure variation in connection taper. Taper gages are shipped
with our standard set of .072” diameter contact points (T072), unless specified otherwise. Refer to
the contact point page 124 for the proper contact points for your particular connections. IT-6001
includes one set of extension rods up to 13⅜”. Higher resolution indicators are available.

IT-6000 Internal Taper Gage 4¼” Depth, 1½” - 9” Diameter 1” .001”
IT-6001 Internal Taper Gage Any Depth, 5” - 13⅜" API Sizes ½” .001”
IT-6001-VM Internal Taper Gage Any Depth, 3½” Diameter ¼” .001”
IT-6000 Replacement Parts

IT-6000-07 Replacement Arm Set 4¼”
IT-6000
IT-6001 Replacement Parts (Extensions have #10-40 threads)
Model Description Length Model Description Length
Cap- Mitutoyo Extension rod,
IT-6001-01M - IT-6001-13 4.643”
Indicator 9⅝” Connection
Extension rod,
IT-6001-04 Point Adapter .062” IT-6001-14 5.768”
10¾” Connection
Extension rod, Extension rod,
IT-6001-06 .200” IT-6001-15 6.768”
5” Connection 11¾” Connection
IT-6001-07 .523” IT-6001-16 8.393”
5½” Connection 13⅜” Connection
IT-6001-09 1.643” IT-6001-17 11.018"
6⅝” Connection 16” Connection
IT-6001-10 2.023” IT-6001-18 13.643"
7” Connection 18⅝” Connection
IT-6001-11 2.643” IT-6001-19 15.018"
7⅝” Connection 20" Connection
Extension rod,
IT-6001-12 3.643”
8⅝” Connection
IT-6001 and
Extension Rods
IT-6001-VM Replacement Parts
Model Description Minimum Bore
IT-6001-01-VM Short Cap 3.4275"
Phone: 713-472-7360 • Fax: 713-472-7241 115

Gagemaker Products
Functional Size
RG-7001 External Functional Size Thread Inspection Gages ( ⅝” to 24” Diameters)
These functional thread inspection, or “GO/NO GO” gages, measure external thread diameters. The
gages are adjustable within a size range and use interchangeable thread rolls to measure different pitch
threads. Setting dimensions for the functional pitch diameter gages are provided by the TDWIN Thread
Disk software. The software (see page 129) and thread rolls (see page 117) are sold separately.
Indicators have a ½”travel and .0005” resolution, and higher resolutions are available.

RG-7000 External Thread Roll Gage ⅝” - 4” (15.9 mm - 101.6 mm)
RG-7001 External Thread Roll Gage 4” - 8” (101.6 mm - 203.2 mm)
RG-7004 External Thread Roll Gage 16” - 20” (406.4 mm - 508 mm)
RG-7005 External Thread Roll Gage 20” - 24” (508 mm - 609.6 mm)
RG-LAA Lower Adjustment Arm
Internal Functional SIze Thread Inspection Gages (1½” to 24” Diameters)

Gagemaker also manufactures functional thread inspection gages that inspect internal threads. The
gages are adjustable within a size range and use interchangeable thread rolls to measure different
PG-6000 Series
pitch threads. Indicators have a ½”travel and .0005” resolution, and higher resolutions are available.
Thread roll sets not included. See page 117 for thread rolls.

PG-6000 Internal Thread Roll Gage, 2½” reach 1½” - 9” (38 mm - 228.6 mm)
PG-6001 Internal Thread Roll Gage, 2½” reach 9” - 16” (228.6 mm - 406.4 mm)
PG-6002 Internal Thread Roll Gage, 2½” reach 16” - 24” (406.4 mm - 609.6 mm)
PG-6003 Internal Thread Roll Gage, 2½” reach 24" - 32" (609.6 mm - 812.8 mm)
PG-6000-SA Replacement Arm Set 2½” reach
PG-6000-XA Extended Reach Arm Set 4½” reach
PG-6000-17 Locking T-nut for Arms
Deep Bore Internal Functional Size

The DPG-6000 gage inspects diameters of internal threads using thread rolls. This functional diameter
gage inspects the effects of all thread element variations and reports any deviations. All thread rolls
are sold separately. See page 117 for thread rolls.

Deep bore thread roll gage assembly for 4 pitch and
DPG-6000 3” - 4.300” dia., 6” Reach
finer threads only.
DPG-6R Handle Extension Assemblies 6” Reach
DPG-6000 DPG-18R Handle Extension Assemblies 18” Reach
DPG-1 Diameter Extension Arms 3” to 4.300” dia.
DPG-2 Diameter Extension Arms 4.300” to 5.100” dia.

Thread Rolls
Gagemaker thread rolls are sold in matched sets of two rolls. Specify the pitch of the thread when
ordering.
UN Series Thread Rolls

“TRV” thread rolls inspect the functional fit of machine threaded parts with 60° “V” thread forms. These thread rolls are designed
specifically for internal or external applications.
Internal Thread Diameters (1½” & Larger) External Thread Diameters (1½” & Larger)
Acme and Stub Acme Thread Rolls

“TRA” and “TRSA” thread rolls inspect the functional fit of parts with 29° Acme and Stub Acme thread forms.
Acme Thread Diameters (1½” & Larger) Stub Acme Thread Diameters (1½” & Larger)
TRA-12P 12 pitch 29°Acme TRSA-12P 12 pitch 29° Stub Acme
ISO Metric Series Thread Rolls

“TRM” thread rolls inspect the functional fit of machine threaded parts with ISO Metric 60° “V” thread forms.
Internal Thread Diameters (38.1mm & Larger) External Thread Diameters (38.1mm & Larger)
TRMI-4P 4 mm pitch internal 60° “V” TRME-4P 4 mm pitch external 60° "V”
TRMI-3.5P 3.5 mm pitch internal 60° “V” TRME-3.5P 3.5 mm pitch external 60° “V”
TRMI-3P 3 mm pitch internal 60° “V” TRME-3P 3 mm pitch external 60° “V”
TRMI-2P 2 mm pitch internal 60° “V” TRME-2P 2 mm pitch external 60° “V”
TRMI-1.75P 1.75 mm pitch internal 60° "V” TRME-1.75P 1.75 mm pitch external 60° “V”
TRME-1P 1 mm pitch external 60° “V”
National 7° X 45° Buttress Series Thread Rolls

“TRB” thread rolls inspect the functional fit of machine threaded parts with 7° X 45° Buttress thread forms.
Thread Diameter (1½” & Larger) Assorted
Thread Rolls
TRB745-2P 2 pitch 7° X 45° Buttress TRB745-8P 8 pitch 7°X 45° Buttress
TRB745-3P 3 pitch 7° X 45° Buttress TRB745-10P 10 pitch 7°X 45° Buttress
TRB745-3.5P 3.5 pitch 7° X 45° Buttress TRB745-12P 12 pitch 7° X 45° Buttress
TRB745-4P 4 pitch 7° X 45° Buttress TRB745-16P 16 pitch 7° X 45° Buttress
TRB745-6P 6 pitch 7° X 45° Buttress
Trapezoidal Thread Rolls

"TRT" thread rolls inspect the functional fit of machine thread parts with trapezoidal thread forms.
Thread Diameter (38.1 mm & Larger)
Model Description Model Description Model Description
TRT-2P 2 mm pitch Trapezoidal TRT-5P 5 mm pitch Trapezoidal TRT-9P 9 mm pitch Trapezoidal
Specials- All other thread forms- Available Prices Available Upon Request
Phone: 713-472-7360 • Fax: 713-472-7241 117

Gagemaker Products
Small Diameters
Small Internal Diameter Thread Inspection Gages
SPG-6000 with
thread rolls
⅝” (.625) to 1½” (1.500) Diameters
The SPG-6000 line of thread inspection gages measures internal thread diameters smaller than
1.500”. The SPG-6000 can be equipped with either thread rolls or contact points. Contact points are
used to measure pitch diameter, while thread rolls are used in measuring functional size. Contact
points, contact point arms, software, and thread rolls sold separately.

⅝” - 1½”
SPG-6000 Internal Pitch Diameter Gage, 1” reach
(15.9 mm - 38.1 mm)
Small Internal Diameter UN Series Thread Rolls

“SRV” thread rolls inspect the interanl functional size of machine threaded parts with 60° “V” thread
forms. These thread rolls are designed specifically for internal applications. Rolls are sold in matched
sets (2 rolls). Rolls sold separately from gages and software. Please specify the pitch of thread
when ordering.
Internal Thread Diameters

(.750” to 1.500”)
Model Pitch Model PItch
SRVI-6P 6 pitch internal 60° “V” SRVI-14P 14 pitch internal 60° “V”
SRVI-13P 13 pitch internal 60° “V”
Small Internal Diameter ISO Metric Thread Rolls

“SRM” thread rolls inspect the internal functional size of machine threaded parts with 60° “V” thread
forms. These thread rolls are designed specifically for internal applications. Rolls are sold in matched
sets (2 rolls). Rolls sold separately from gages and software. Please specify the pitch of thread
when ordering.
Internal Thread Diameters

(.750” to 1.500”)
Model Pitch
SRMI-4P 4 mm
SRMI-35P 3.5 mm
SPG Thread Rolls SRMI-3P 3 mm
SRMI-25P 2.5 mm
SRMI-2P 2 mm
SRMI-175P 1.75 mm
SRMI-15P 1.5 mm
SRMI-1P 1 mm

Small Diameter Contact Point Arms
“SPA” contact point arms hold “SP” straight shank contact points on the SPG-6000 for small internal
pitch diameter measurements. Sold separately from gage as a set of 2. Contact points are not SPG-6000 with
included, see chart below. Custom sizes are available, contact customer service for more information. contact points
Model Description Reach Min. Bore

SPA-265 Contact point arms, .265” Diameter 1” Long .700”
SPA-375 Contact point arms, .375” Diameter 1.25” Long .950”
SPA-437 Contact point arms, .437” Diameter 1.50” Long 1.100”
Small Diameter Contact Points

Gagemaker’s SP straight shank contact points are manufactured with carbide balls. Standard contact
diameters are held to tolerances of + .0002”. “SP” contact points fit “SPA” contact point arms only.
Contact point sizes are matched closely to thread inspection wire sizes. These contact point sizes
are used in the TDWIN software program (sold separately). Contact points sold individually and
separately. Contact point arms are not included.
UN, UNJ, and UNR Series Contact Points
Model Thread Pitch Model Thread Pitch

SP-105 5 pitch SP-050 11.5 - 12 pitch
SP-096 6 - 7 pitch SP-041 13 - 16 pitch
SP-072 8 - 9 pitch SP-032 18 - 20 pitch
SP-057 10 pitch
Acme, Stub Acme, and Stub Acme Mod-1 & -2 Contact Points

SP-105T 5 pitch SP-050T 10 pitch
SP-090T 6 pitch SP-041T 12 - 14 pitch
SP-062T 8 pitch SP-032T 16 pitch
Metric and MJ Series Contact Points

SP-105 4.5 - 4.75 mm SP-057 2.5 mm
SP-096 4 - 4.25 mm SP-041 1.5 - 2 mm
SP-072 3 - 3.5 mm SP-032 1 - 1.25 mm SPA Contact Point Arms
Small Diameter Contact Point Arms for Threaded Contact Points

“STPA” contact point arms hold threaded contact points on the SPG-6000 for small internal pitch SPA Contact Points
diameter measurements. Sold as a set of 2. Gage, software, and contact points are not included. For
contact points, see pages 124-125. Custom sizes are available, contact customer service for more
information.
Model Description Reach Min. Bore

STPA-375 Threaded contact point arms, .375” Diameter 1.25” Long 1.032”
STPA-437 Threaded contact point arms, .437” Diameter 1.50” Long 1.152”
STPA Contact Point Arms
Phone: 713-472-7360 • Fax: 713-472-7241 119

Gagemaker Products
Thread Lead
Lead Gages
The lead gage inspects t thread leads using contact points that seat in the threads of a part. Thread lead
is the distance between threads, measured on a plane parallel to the centerline of the threaded part. The
pitch of the thread determines the diameter of the contact points required for taking measurements. API
Specification 7-2 requires thread lead inspection.
The LG-5001 and the LG-5002 use a two-point system to inspect thread lead for straight and tapered
threads. The LG-5001 inspects external threads, while the LG-5002 inspects both external and internal
threads. The two point system allows for a sweeping action to obtain the measurement.
The LG-5003 uses the three-point system to inspect internal and external thread lead. Two fixed contact
points at the rear of the gage and one moveable contact point at the front of the gage provide complete
stability when taking thread lead measurements. This unique design does not require sweeping to obtain
measurements.
Contact points can be easily changed to allow the gage to be used on a variety of thread forms.
Before inspecting parts, the lead gage must be preset to a nominal predetermined dimension using
LG-5002
a lead gage setting standard. Lead standards are available for both straight and tapered threads. Our
setting standards are manufactured according to ANSI and API specifications, respectively.
Please see pages 124-125 for contact points. See page 121 for standards.
Features
• Uses a three-point system for greater stability when inspecting parts (LG-5003).
• Uses interchangeable contact points to allow inspection on a variety of thread forms.
• Requires presetting using Gagemaker’s lead gage setting standards.
LG-5003 LG-5001 External Lead Gage 2-point 1.200 ½” - 2” Thread Length
External Lead Gage 2-point, .0001"

LG-5001-1 1.200 ½” - 2” Thread Length
grad. indicator
LG-5002 Lead Gage 2-point 1.200 ½” - 4” Thread Length
Lead Gage 2-point, .0001" grad.

LG-5002-1 1.200 ½” - 4” Thread Length
indicator
Lead Gage 3-point
LG-5003 1.340 ½” - 4” Thread Length
Contact point spacing .500"
Lead Gage 3-point, .0001" grad.

LG-5003-L LG-5003-1 1.340 ½” - 4” Thread Length
indicator, Contact point spacing .500"
Lead Gage 3-point, Contact point

LG-5003-J 1.340 ½” - 4” Thread Length
spacing .193"
Lead Gage 3-point, .0001" grad.,
LG-5003-1J 1.340 ½” - 4” Thread Length
Contact point spacing .193"
LG-5003-L Special Load-to-Load lead gage 1.500 ½” - 4” Thread Length
LG-5003-S Special Stab-to-Stab lead gage 1.500 ½” - 4” Thread Length

Gagemaker’s precision lead gage setting standards are manufactured in accordance with ANSI
Specifications, API Specification 5B, and API Specification 7-2. Lead gage standards are used to set
the gage prior to inspection.

LS-1005
API 8-Round Casing, Tubing & Drill Pipe,
LS-1001 ¾” 8 & 10
All 10-Round Tubing
LS-1002 Straight Threads, 6 - 18 Pitch, 4” Length Straight 8 & 10
LS-1003 11½” “V” API Line Pipe ¾” 11½
LS-1004 Straight threads, Line pipe Straight 11½
LS-1005 API Buttress Casing, Internal/External 4½” - 13⅜” ¾” 5
LS-1006 API Buttress Casing, Internal/External 16” - Larger 1” 5
6⅝” API Reg

4”, 5½”, & 6⅝” API Full Hole
LS-5001
2⅞”, 3½” - 5” Hughes Xtra Hole
LS-1007 2” 4
2⅜”, 2⅞” - 4½” Hughes Slim Hole
2⅜” - 5½” API INT Flush
API Numbered Connections #23-#50
5½”, 7⅝” - 8⅝” API Reg

LS-1008 3” 4
2⅜” - 4½” API Reg
LS-1009 3” 5
3½”, 4½” API Full Hole
M.T. (Macaroni Tubing) LS-5002
LS-1010 1½” 4
2⅜” - 3½” PAC
2⅜” - 4” American Open Hole
LS-1011 3½” - 6⅝” Hughes H-90 2” 3½
LS-1012 7”- 8⅝” Hughes H-90 3” 3½
LS-1013 2⅜” - 3½” Slim Line H-90 1¼” 3
LS-5001 Straight Threads, 1-5 pitch, 4” length
LS-5002 Straight Threads, 6-18 pitch, 4” length
Lead is measured in one inch intervals. As shown below, the cumulative

lead interval is the total measured distance from the first to the last thread.
LG-5002 in Last and First Position Cumulative
Phone: 713-472-7360 • Fax: 713-472-7241 121

Gagemaker Products
Thread Height
Gagemaker manufactures many models of external thread height gages. Specify the type of thread
TH-3001V when ordering. Contact point listed in description (e.g. T072) is included, but may specify other.
See page 123 for standards and contact points.

TH-3002B* External Thread Height, 0-25-0, T072 ¾” TPF Buttress .094" 2.930"
External Thread Height, 0-25-0, Step
TH-3003B* 1” TPF Buttress .094" 2.930"
Base, T072
TH-3002BB External Thread Height Base Only ¾” TPF Buttress
TH-3003BB External Thread Height Base Only 1” TPF Buttress
TH-3001R External Thread Height, 0-100, T501 8-Round .162" 3.400"
TH-3002R* External Thread Height, 0-50-0, T501 8-Round .162" 3.400"
TH-3002RB External Thread Height Base Only 8-Round
External Thread Height, 0-25-0, Rotary Shouldered
TH-3000-RSC* .196" 3.230"
T072** Connection/Tool Joint
TH-3001S External Thread Height, 0-100, T072 8-Round .196" 3.230"
TH-3001R
Line Pipe, UN/UNJ/
UNR, Acme, Stub
Acme, Stub Acme
TH-3001V External Thread Height, 0-100, T500C Modified I and II, .196" 3.230"
Metric M & MJ, 7º X
45º Buttress, General
Purpose Pipe Threads
TH-3002V* External Thread Height, 0-50-0, T500C Line Pipe/Tool Joint .196" 3.230"
TH-3002VB External Thread Height Base Only Line Pipe/Tool Joint
*Gage requires a standard for setting before inspection.
**Also ships with either T034 or T044 depending on the connection, please specify when ordering.

Gagemaker also manufactures several models of internal thread height gages. Please specify the
type of thread when ordering. Contact point listed in description (e.g. T072) is included, but may
specify other. See page 123 for standards and contact points.

Internal Thread Height, 0-25-0,
TH-3004* Line Pipe .105" 1.575"
T500C
TH-3006* 8-Round .105" 1.595"
TH-3002B T502/T503
TH-3008* 8-Round .094" 1.575"
T502/T503
TH-3009* ¾” TPF Buttress .250" 1.750"
T072
Internal Thread Height, 0-25-0, Rotary Shouldered
TH-3009-RSC* .250" 1.750"
1” Base, T072** Connections
Line Pipe, UN/UNJ/UNR,
Acme, Stub Acme, Stub Acme
Internal Thread Height, 0-100,
TH-3010 Modified I and II, Metric M & .250" 1.750"
1” Base Length (TPD), T500
MJ, 7º X 45º Buttress, General
Purpose Pipe Threads
TH-3012* Internal Thread Height, 0-25-0 ¾” - 2” NPT, AMT .090" .750"
*Gage requires a standard for setting before inspection.
**Also ships with either T034 or T044 depending on the connection, please specify when ordering.

Gagemaker manufactures precision setting standards for presetting thread height gages. Please TH-3008
specify the type of thread when ordering. Custom or special standards are available, contact customer
service for more information.
Model Description
1014 8 & 10 Round Threads
1014S 8 & 10 Round Threads (crest to Pitchline “Shave”)
1015 8 & 11½ Pitch “V” Threads TH-3009
1017 13⅜” & Smaller Buttress, ¾” TPF

1018 16” & Larger Buttress, 1”TPF
10322-RS V-0.032, 2 TPF Rotary Shouldered Connections, 6 TPI to be used with T034 pt.
10382-RS V-0.038, 2 TPF Rotary Shouldered Connections, 4 TPI to be used with T072 pt. TH-3010
10551.5-RS V-0.055, 1.5 TPF Rotary Shouldered Connections, 6 TPI to be used with T072 pt.
TH-3004
10761.5-RS V-0.076, 1.5 TPF Rotary Shouldered Connections, 4 TPI to be used with T044 pt.
SL-H90 1¼" TPF, 3 TPI, 90-V-0.084 to be used with T072 pt.
Thread Height Gage Contact Points TH-3006
Model Description
T072 0.072” Contact Point for Buttress Threads, RSC Thread Forms V-0.038R & V-0.055
T044 0.044” Contact Point Rotary Shouldered Connection V-0.050 and V-0.076 thread forms
T034 0.034” Contact Point Rotary Shouldered Connection V-0.032 and V-0.040 thread forms TH-3012
T500C 50° Cone Contact Point, “V” Threads for TH-3001V, TH-3002V, & and TH-3004 Gages
T500C-USS Modified 50° Cone Contact Point, USS Improved Buttress
T501 50° Cone Contact Point, Self-Centering for TH-3001R and TH-3002R Gages
E-Line .063” R Extreme Line Contact Point
Thread Height Standards
Phone: 713-472-7360 • Fax: 713-472-7241 123

Gagemaker Products
Straight Shank Contact Points

Contact Points
API Contact Points for Lead and Taper Gages
Gagemaker’s standard contact points are manufactured with carbide balls. Both threaded and straight
(non-threaded) shanks are available. All Gagemaker’s inspection gages use threaded shank contact
points. Threaded shanks are #4-48 UNF. Metric threads are available upon request. Most gages
require two contact points.
Straight Threaded Point Threads
Connection Type
Shank Model Shank Model Diameter Per Inch
S235 T235 0.235” 3 Hughes Slim Line H-90
S200 T200 0.200” 3½ All Hughes H-90
S144 T144 0.144” 4 API Rotary Shouldered Connections
T501 and T502
Assembly
S128 T128 0.128” 4½ API Rotary Shouldered Connections
S105T T105T 0.105” 5½ Truncated for Extreme Line
S090 T090 0.090” 5 Buttress Casing – Taper
S072 T072 0.072” 8 API Tubing and Casing
S062 T062 0.062” 5 Buttress Casing – Lead
S057 T057 0.057” 10 API Tubing and Line Pipe
S050 T050 0.050” 11½ API Line Pipe
- T044 0.044” 4 RSC Thread Depth Only
T503 S041 T041 0.041” 14 API Line Pipe
T501
- T034 0.034” 5 RSC Thread Depth Only
T502 S032 T032 0.032” 18 API Line Pipe
S021 T021 0.021” 27 API Line Pipe
Special Application Contact Points

PA-45 Gagemaker continually develops new application contacts and indicator accessories. The following
with items are in stock for immediate delivery. These contact points have #4-48 UNF threaded shank.
contact point
RC-375
All contact points are carbide. Special and metric diameters are available, please call for quotation.
(sold
Straight Shanks are available for T060, T098, and T156.
separately)
Model Ball Dia. Model Ball Dia. Model Ball Dia. Model Ball Dia.
T028 .028" T100 .100” T176 .176" T375 .375”
T500C E-Line Blade TPD T043 .043" T116 .116 T188 .188” T430 .430"
T045 .045" T118 .118” T219 .219” T4375 .4375"
T059 .059" T125 .125” T250 .250” T475 .475"
T060 .060" T1335 .1335" T266 .266” T500 .500”
T068 .068" T150 .150" T295 .295" T531 .531”
T071 .071" T155 .155" T300 .300" T625 .625
T086 .086” T156 .156" T325 .325" T750 .750"
T087 .087” T157 .157" T344 .344”
T500C-USS
P500 T092 .092" T160 .160" T350 .350"
T098 .098" T165 .165” T360 .360"
General Purpose Points and Accessories

Point Extensions Model Description
(Left to Right- T500C 50° Cone Contact Point, “V” Threads for TH-3001V, TH-3002V,TH-3004 Gages
PE-.300, PE-.500 T500C-USS Modified 50° Cone Contact Point, USS Improved Buttress
PE-.750, PE-1.00)
T501 50° Cone Contact Point, Self-Centering for TH-3001R, TH-3002R Gages
E-Line .063” R Extreme Line Contact Point for TH-3003E Gage
TPD .020” R Contact Point for PD-3003 & PD-3004 Gages
PE-___ Point Extensions available in .300”, .500”, .750” & 1.00” (Ex. PE-300)
PA-45 45° Point Adapter, contact point not included
RC-375 .375” Diameter Roller Contact
P-500 TH-3001R Gage, Flat Face Contact
Blade-25 .008" thickness, .170" Diameter, .250" Depth Blade Point
Blade-50 .008" thickness, .170" Diameter, .500" Depth Blade Point

Contact Points(Continued)
These contacts points are used to inspect the pitch diameter of machined parts with 60° “V” thread
forms. Two are required for most gages.
Model Thread Pitch Model Thread Pitch Model Thread Pitch Truncated Contact Point
T562 1 T115 5 T050 11½ & 12
T288 2 T105 5½ T041 14 & 16
T188 3 & 3½ T096 6 T032 18
T144 4 T072 8
Threaded Shank Contact Points
T128 4½ T057 10

T041
These truncated contact points are used to inspect the pitch diameter of machined parts with 29°
Acme and Stub Acme thread forms. Two are required for most gages.
Model Thread Pitch Model Thread Pitch Model Thread Pitch

T531T 1 T144T 3½ T050T 10
T344T 1½ T128T 4 T041T 12 & 14
T062
T266T 2 T105T 5 T032T 16
T219T 2½ T090T 6&7
T188T 3 T062T 8

T072
These contact points are used to inspect the pitch diameter of machined parts with 7° x 45° Buttress
thread forms. Two are required for most gages.
Model Thread Pitch Model Thread Pitch Model Thread Pitch

T562 1 T188 3 T072 8
T105
T437 1¼ T156 3½ T057 10
T375 1½ T144 4 T050 12
T281 2 T115 5 T032 16 & 18
T219 2½ T096 6
Trapezoidal Thread Contact Points

T115
These contact points are used to inspect the millimeter pitch diameter of machined parts with
Trapezoidal thread forms. Two are required for most gages.
Model mm Pitch Model mm Pitch

T144 7 T062 3
T125 6 T050 2½ T125
T096 5 T041 2
T082 4 T032 1½
T072 3½
ISO Metric Series Contact Points

These contact points are used to inspect the pitch diameter of machined parts with ISO Metric 60° T250
“V” thread forms. Two are required for most gages.
Model mm Pitch Model mm Pitch

T096 4 T057 2½
T072 3 & 3½ T041 1½, 1¾, & 2
Phone: 713-472-7360 • Fax: 713-472-7241 125

Gagemaker Products
Thread Form
Straight Thread Form Profile Gages
Gagemaker manufactures precision straight thread profile gages for quick identification of a thread
form. Specify thread pitch to be inspected when ordering. Special form profiles are available.
Model Description Order Example

TP-UNVI-__P Internal UN series thread gage TP-UNVI-2P,
TP-UNVE-__P External UN series thread gage TP-UNVE-4P,
TP-GPA-__P Internal/external general purpose Acme thread profile gage TP-SA-8P, etc.
TP-SA-__P Internal/external Stub Acme thread profile gage
TP-MI-__P Internal ISO Metric series thread profile gage
TP-ME-__P External ISO Metric series thread profile gage
TP-745-__P Internal/External 7° X 45° Buttress thread profiile gage
Tapered Thread Form Profile Gages
Gagemaker manufactures precision tapered thread profile gages for the quick identification thread
form identification. When ordering, specify the connection to be inspected. Special profiles will be
quoted upon request.
Model Connection Type TPI, TPF, Thread Form

TP-RTC-8R API 8-Round Casing, Tubing & Drill Pipe 8 TPI, ¾” TPF, 8 Round
TP-RTC-10R API 10-Round Tubing 10 TPI, ¾” TPF, 10 Round
TP-8V 8V API Line Pipe 8 TPI, ¾” TPF, 8 V Thread
TP-11-1/2V 11½ V API Line Pipe 11½TPI, ¾” TPF, 11½ V Thread
TP-5BTC75-INT API Buttress Casing, Internal, 4½” - 13⅜” 5 TPI, ¾” TPF
Assorted Straight Thread Profiles
TP-5BTC75-EXT API Buttress Casing, External, 4½” - 13⅜” 5 TPI, ¾” TPF
TP-5BTC1-INT API Buttress Casing, Internal, 16” - 20” 5 TPI, 1” TPF
TP-5BTC1-EXT API Buttress Casing, External, 16” - 20” 5 TPI, 1” TPF
TP-3-1.25-84 2⅜” - 3½” Hughes Slimline H-90 3 TPI, 1.25” TPF, 90-V-0.084
TP-3.5-2-50 3½”- 6⅝” Hughes H-90 3.5 TPI, 2” TPF, 90-V-0.050
TP-3.5-3-50 7” - 8⅝” Hughes H-90 3.5 TPI, 3” TPF, 90-V-0.050
2⅜” - 3½” P.A.C. Connections
TP-4-1.5-76 4 TPI, 1.5” TPF, V-0.076
2⅜” - 4½” American Open Hole
6⅝” API Regular
TP-4-2-50 4 TPI, 2” TPF, V-0.050
5½” & 6⅝” API Full Hole
4” API Full Hole, 2⅞” - 5” Hughes Xtra Hole,
2⅜” - 4½” Hughes Slim Hole,
TP-4-2-38 4 TPI, 2” TPF, V-0.038R
2⅜” - 6⅝” Internal Flush
TP-4-3-38 API Numbered Connections #56 - #77 4 TPI, 3” TPF, V-0.038R
TP-4-3-50 5½”, 7⅝”, & 8⅝” API Regular 4 TPI, 3” TPF, V-0.050
2⅜” - 4½” API Regular
TP-5-3-40 5 TPI, 3” TPF, V-0.040
2⅞”, 3½”, 4½” API Full Hole
Assorted Tapered Thread Profiles TP-6-1.5-55 6 TPI, 1.5” TPF, V-0.055
M.T. (Macaroni Tubing)
TP-6-2-32 2⅜" - 2⅞” Hughes External Flush 6 TPI, 2” TPF, V-0.032
TP-9060LS 90° & 60° Threads, Tool Grinding & Setting Gage Tool Grinding & Setting Gage
TP-NPT-8 NPT Threads 8 TPI, ¾” TPF
TP-NPT-11-1/2 NPT Threads 11.5 TPI, ¾” TPF
TP-NPT-14 NPT Threads 14 TPI, ¾” TPF
Specials Available Upon Request

Thread Form Profile Overlays
Overlay Charts for profiles are available. For more information, please contact customer service.
Special Overlay are also available. For Special Overlays, please specify the following:
1. Screen Size
2. Magnification 20X/50X
3. Product Form or Profile Template
Buttress Runout
Buttress Runout Gage BR-2001
Buttress runout gages ensure proper thread pullout on runout type threads. Thread runout is the
measurement of the abruptness with which the buttress thread is terminated at the triangle end of
the thread. A rapid pull-out of the cutting tool results in steep slope at the end of the thread. This
causes high stress at the contact point when the coupling is made-up. Buttress runout gages have
standard 1” and 2” point spacing. Inlcudes one contact point (TBR) and shoes.

BR-2001 Buttress Runout Gage All Sizes
BR-2001-USS Buttress Runout Gage for USS Improved Buttress All Sizes
BRB-2001 Buttress Runout Base Only All Sizes
TI-RSC-60
BRS-2001 Replacement Shoes (2)
Insert Identifiers
Gagemaker’s thread insert indentifiers easily determine which threading insert the machinist is using.
When an optical comparator is unavailable, the insert indentifier will show which thread form is on
the insert.
Model Taper Per Foot/Pitch Thread Forms

Rotary Shouldered Connections- V-0.032,
TI-RSC-60 1.5", 2", & 3" V-0.038R, V-0.040, V-0.050, V-0.055, V-0.065, &
V-0.076
Rotary Shouldered Connections- A-0.094,

TI-RSC-90 1.25", 2", 3", & 3.373"
90-V-0.050, & 90-V-0.084
3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P,
TI-ACME-INT Internal Acme
14P, & 16P
3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P,
TI-SACME-INT Internal Stub Acme
14P, & 16P
Tubing and Casing - 8 Round, 10 Round, & ¾” and

TI-T&C ¾” and 1”
1” Internal and External Buttress
Phone: 713-472-7360 • Fax: 713-472-7241 127

Gagemaker Products
Software
Thread Disk Software
Straight Thread Dimensions TDWIN
The Thread Disk engineering software calculates critical dimensions for threads based on ANSI tables
and formulas. Thread types supported by the program include: UN, UNJ and UNR Series, Acme, Stub
Acme, Stub Acme Modified I and II, Metric M & MJ, 7º X 45º Buttress, and General Purpose Pipe
Threads.
To generate critical dimensions instantly, enter basic thread information on the Thread Type Entry
screen, such as: thread type, thread class, nominal diameter, and threads per inch. Once the results
are computed, tabs at the bottom of the program allow selection of several types of calculated
information, including dimensions and tolerances for product threads, ring gages, set plugs, plug
gages or Gagemaker’s Thread Diameter gages.
TDWIN Software
If measuring internal and external shallow taper diameters is a problem, the Ball Mic SET DIM Tool
provides setting dimensions for ball micrometers or Gagemaker’s BX-1000 groove gage. The program
calculates ball mic settings for any tapered surface geometry.
Other features of the program include the ability to print thread dimension reports, providing a
paper copy of any calculation. These reports provide the same critical dimensions that display in the
program. A multiple calculation window capability is a feature that allows performing several different
thread calculations at the same time.
System Requirements
• Windows XP or higher
• 64 MB RAM
• 3 MB of free hard disk space
• CD-ROM drive
Features
• Uses ANSI tables, formulas, and tolerances

• Calculates standard and non-standard product thread diameters from #000 to 99.8”
• Calculates ANSI ring and plug gage dimensions
TDWIN Screenshots • Addresses pitches from 1 to 400
• Calculates Gagemaker style thread gage setting dimensions
Model Description
TDWIN Thread Disk software
TDWIN-Network Multi-user license agreement
TDWIN Report

Thread Disk Software
Tapered Thread Dimensions TDWIN Taper
Gagemaker's TDWIN Taper software simplifies the API specifications that control connection
quality. TDWIN Taper produces dimensional drawings and inspection data for API downhole tubular
connections based on the most current industry standards. All the necessary details to machine,
inspect and document tubular connection threads are available in one convenient program.
TDWIN Taper provides easy access to information for both preferred and non-preferred Rotary
Shouldered Connections, Tubing and Casing Connections, and any combination of Crossover.
The program offers standard connection types and sizes. TDWIN Taper relies on API and industry
standard tables and tolerances. It displays connection drawings, inspection gage information, and
setup and inspection reports.
The software displays printable drawings suitable for manufacturing. The drawings follow ASME
Y14.5 standards for industry compatibility. Print gage setup and inspection reports with your
company logo and work order information. The program offers the choice to save reports and jobs
for future reference.
TDWIN Taper Software
Tapered oilfield connection types supported by the program include the following:

API Numbered Connections PAC Slimline H-90
API Regular Slim Hole External Flush
Full Hole Wide Open Acme Regular
Internal Flush Xtra Hole Acme Streamline
Open Hole H-90 Double Streamline

Buttress Casing
TDWIN Taper Screenshots

System Requirements

• USB 2.0 port
• Screen resolution of 1024 x 768 minimum
Features
• Print dimensional reports and inspection sheets

• Provides gages configurations, setting standards, and contact point information TDWIN Taper Report
Model Description
Phone: 713-472-7360 • Fax: 713-472-7241 129

Gagemaker Products
Indicators
83-0582
Dial Indicators
83-0584 Gagemaker’s mechanical indicators are manufactured per ANSI AGD specifications.
Model Correlating Gage Model Travel Resolution
1512SGA (CONT) WT-9000 Series .250” .0005”

1512SRGA (CONT) TH-3002R, TH-3002V, PD-3003 .250” .0005”
1513SGA (BAL) PN-3000 Series, BX-1000, BXG-1000 (was 803) .125” .0005”
1513SRGA (BAL) TH-3002B, TH-3003B, TS-4000 (was 803I) .125” .0005”
2046SGA 801 (BAL) BR-2001 .250” .001”
801I (BAL) TH-3002R, TH-3002V .250” .001”
802 (CONT) WT-9000 Series .250” .001”
863 802I (CONT) TH-3001R, TH-3001V, PD-3003 .250” .001”
862L (CONT) ET-7001, ET-7002, ET-7004, ET-7006 Series w/ Lever .500” .001”
862I (CONT) IT-6001, PD-3004 .500” .001”
RG-7000 Series, TH-3004, TH-3006, TH-3008,
863 TH-3009, TH-3010, SRG-7000, CA-9001, MRP-5000 .500” .0005”
Series, SPG-6000
863L (BAL) PD-8000 Series w/ Lever .500” .0005”
PD-6000, PD-6001, PG-6000 Series,
543-683B 863I (BAL) .500” .0005”
TS-1000, IT-5100, MRP-5500, SPG-6000
882L (CONT) ET-7003, ET-7005, ET-7007 w/ Lever 1.00” .001”
882I
882I (CONT) IT-6000 1.00” .001”
80-0403 LG-5002, LG-5003 .100" .0005”
80-0400 LG-5002, LG-5003 .025” .0001”
83-0584 MRP-2000, MRP-2500, MRP-3000 .500” .001”
83-0582 MRP-2000, MRP-2500, MRP-3000 .500” .0005”
87-070 MRP-1000, MRP-1500 .125” .0005”
Notes: (BAL) indicates Balanced.
(CONT) indicates Continuous.
“I” after the model number indicates counter clockwise rotation.
“L” after model number indicates a lifting lever .
Multipurpose Indicators
803
Model Description Travel Resolution

2358B-MRP All MRP Gages .500” .0001”
2358SGA Multipurpose Indicator, Balanced .500" .0001"
2358SRGA Multipurpose Indicator, Balanced .500" .0001"
2776SGA Multipurpose Indicator, Continuous, Clockwise 1.00” .0005”
2776SRGA Multipurpose Indicator, Continuous, Counterclockwise 1.00” .0005”
2777SGA Multipurpose Indicator, Balanced, Clockwise 1.00” .0005”
2777SRGA Multipurpose Indicator, Balanced, Counterclockwise 1.00” .0005”
1513SGA
M801
1044SRGA

Metric Dial Indicators
Model Description Travel Resolution

Bezel
1044SGA Metric Mechanical, Continuous, Clockwise 5 mm .01 mm Assembly
1044SRGA Metric MechanicaL, Continuous, Counterclockwise 5 mm .01 mm
1045SGA Metric Mechanical, Balanced, Clockwise 5 mm .01 mm
1045SRGA Metric Mechanical, Balanced, Clockwise 5 mm .01 mm
2046SGA Metric Mechanical, Continuous, Clockwise 10 mm .01 mm
2047SGA Metric Mechanical, Balanced, Clockwise 10 mm .01 mm
21AZB151
2902SRGA Metric Mechanical, Continuous, Counterclockwise 10 mm .01 mm
2047SRGA Metric Mechanical, Balanced, Clockwise 10 mm .01 mm
2050S-01 Metric Mechanical, Continuous 20 mm .01 mm
Digital Indicators
Model Description Travel Resolution Accuracy

543-452B Electronic/Digital 1” .00005” .0005” 21RZA065
543-683B Electronic/Digital .500” .0005” .0005”
SC0232014-00 Electronic/Digital (RSC Only) .500” .0005”/.0001” .0005”/.0001”
Indicator Replacement Parts

193592 &
Dial rings are available for all indicators. Please call for more information. 193690
Small Dials
Model Description
21AZB353 Bezel Assembly (Blue "S" Type)
21BAA147A Bezel Assembly (Black "F" Type)
21AAB364 Bezel Clamp Washer (Blue "S" Type)
21AAB162 Bezel Clamp Screw (Blue "S" Type)
193592 Bezel Clamp Washer (Black "F" Type)
193690 Bezel Clamp Screw (Black "F" Type)
900527 Mitutoyo Lifting Lever
Large Dials
Model Description
21AZB161 Bezel Assembly (Blue "S" Type)
192683 Bezel Assembly (Black "F" Type)
21RZA065 Bezel Clamp Assembly (Blue "S" Type)
21BA083 Bezel Clamp Washer (Black "F" Type) SC0232014-00
101214 Bezel Clamp Screw (Black "F" Type)

21AZB151 Mitutoyo Lifting Lever
Phone: 713-472-7360 • Fax: 713-472-7241 131

Gagemaker Products
Gage Setting and Part Measurement

Gage Setting and Part Measurement Systems
This package features the MIC TRAC as a multi-use gage setting system. The system sets or zeros
most gages with the use of interchangeable anvils or blocks. Standard resolution of base unit is
.00005”. Accuracies range from ±.0001” to ±.0004”. The Digital Read Out (DRO) is CE approved.
All MIC TRAC 3000 Series inlcude one set of TF-PL blocks and a shipping carton. Larger ranges are
available, please contact customer service for more information.
Shop Floor Gage Setting and Part Measurement System

MT-3000 Standard Base Units without Force-Lok
Int. 0” - 12”
MT-3012-50 MIC TRAC Base Unit w/ DRO +.0001” .00005”
Ext. 1½" - 13½"
Int. 0” - 24”
Ext. 1½" - 25½"
Int. 0” - 36”
Ext. 1½" - 37½"
Int. 0” - 48”
MT-3012-50 MT-3048-50 MIC TRAC Base Unit w/ DRO +.0004” .00005”
with TF-PL Blocks Ext. 1½" - 49½"
MT-3000 Standard Base Units with Force-Lok
MIC TRAC Base Unit w/ DRO Int. 0” - 12”
MT-3012F-50 +.0001” .00005”
and Force-Lok Ext. 1½" - 13½"
MT-3024F-50 +.0002” .00005”
DRO
MT-3036F-50 +.0003” .00005”
MT-3048F-50 +.0004” .00005”
MT-3000 Base Unit with Computer & MT-4-USB
MT-4-USB MIC TRAC Base Unit with Force-Lok, Int. 0” - 12”
MT-3012F-50-USBC +.0001” .00005”
Computer, & USB Ext. 1½" - 13½"
MIC TRAC Base Unit with Force-Lok, Int. 0” - 24”
MT-3024F-50-USBC +.0002” .00005”
MT-3036F-50-USBC +.0003” .00005”
MT-3048F-50-USBC +.0004” .00005”
High Resolution MT-3000 Base Unit with Computer & MT-4-USB
Computer
MT-3012F-10-USBC +.00005” .00001”
MT-3024F-10-USBC +.00010” .00001”
MT-3036F-10-USBC +.00015” .00001”
MT-3048F-10-USBC +.00020” .00001”
MT-3060F-10-USBC +.00023” .00001”

MIC TRAC Setting Blocks
TF-1F
The MIC TRAC 3000 receiver blocks include precision, calibrated surfaces designed for mounting all the
various setting blocks. Depending on the requirements of the application, each pair of MIC TRAC setting
blocks is precisely ground with either a flat or tapered gauging surface. Setting blocks are supplied in
sets of two, with various degrees of taper available.
TF-PL
Model Description
Shallow Tapered Cylinder Setting Blocks (2 Block Sets) (used with BX-1000 gages)
TF-10 Tapered Setting Blocks 10° half angle
TF-1V
Special Purpose Setting Blocks
TF-.5F Flat Face Setting Blocks (1.000” outside diameter)
TF-1F Universal flat face setting / measuring blocks (1.500” outside diameter)
TF-PL Flat Face Setting Blocks, No taper (supplied with MIC TRAC)
TAPER
API 6A Ring Groove & Special Flange Groove Setting Blocks BLOCKS
23° BXR Ring Groove Diameter/Width Setting Blocks, used with BX-1000 gages
TF-BX
(2 per set)
Thread Gage Setting Blocks
TF-1V 3-5 pitch 60° “V” thread setting blocks (2 per set)
TF-2V 6-20 pitch 60° “V” thread setting blocks (2 per set)
Tubing and Casing Taper Setting Blocks
TF-BX
TF-STR Straight Blocks
TF-.75T ¾” Taper Blocks, 8 & 10 Round, ¾” TPF Buttress, Line Pipe
TF-1.0T 1” Taper Blocks, 1” TPF Buttress TF-30
TF-1.12T 1⅛” Taper Blocks, 1.125 TPF Connection

TF-1.75T 1¾” Taper Blocks, 1.75 TPF Connections
Special Taper Blocks Available
MRP Straight Face Setting Blocks

TF-1F-T Flat face setting blocks to accept riser block (T-Shape)
Riser Blocks for the Taper Blocks
TF-1F-T
TF-RISER1 1.00” Riser Block (Set of 2)
TF-RISER2 2.00” Riser Block (Set of 2)
Special Taper
TF-RISER3 3.00” Riser Block (Set of 2) Blocks Available
TF-RISER1 TF-RISER3
TF-RISER2
Phone: 713-472-7360 • Fax: 713-472-7241 133

Gagemaker Products
MT-4000 with
Computer
Precision Gage Calibration System
MIC TRAC 4000 Package
This package features the MIC TRAC/MT-4000 as a precision calibration system. The system accepts
fixtures that inspect and calibrate a wide range of gage diameters and thread pitches. The package
includes all the equipment necessary to calibrate precision handheld gages. Ring and plug inspection
requires the purchase of additional accessories.
Package includes:
• MT-4012-10 MIC TRAC electronic adjustable measurement master, range 0” to 12”. Base unit
is error compensated to an accuracy of ±.00005”, resolution .00001”, travel 12.000”.
CERTIFI • Ultra precision scale with 1.00” travel, accuracy ±.00002”, and resolution .00001”.
MT-4-USB
• Computer with CERTIFI Calibration Software. CERTIFI produces calibration reports, has a
recall database, and a digital readout acquisition module.
• CRC MT-4000 Calibration Reference Card Set: procedures documenting calibrations with the
Gagemaker system
• TF-2R: Carbide anvil set, ⅜” diameter
• TF-XYT: Adjustable X, Y & tilt support table for use with the MIC TRAC
TF-2R • CAL-PAK: Assortment of fixtures designed to hold gages for calibration
TDWIN • TDWIN Thread Disk software program: provides critical thread dimensions for manufacturing
and inspection of UN, Acme, Stub Acme, Metric, Buttress, and NPT threads.
• Torque wrench, 50 in. lb. (TW-50)
• AWH-100 bench-top tool holder with wrenches
• Reusable shipping container
CRC MT-4000
AWH-100
PGC-12-W2 Precision Calibration Package 0” - 12”
Additional Packages & Calibration Accessories

TW-50
The following base units and accessories for larger requirements are available options to the
standard MIC TRAC Package above.

TF-XYT
MIC TRAC Package Training Options

We also offer expert-led training for our precision gage calibration systems at your location or at
our facility. Please contact customer service for more information.
CAL-PAK
PGC-__-W2 Training Options: Option A: Training at customer’s facility (per day, plus airfare)
Option B: Training at Gagemaker’s facility (per day, per person)
MT-4000 Base Units with Extended Software Functions

A MIC TRAC 4000 base unit supplied only with digital readout software with extended functions, a
computer, TF-2R setting blocks, and shipping carton.


Precision Gage Calibration System (MT-4000) Accessories
Gagemaker provides various accessories to expand the functionality of the MIC TRAC 4000 base unit. TF-SB
Some of the following are included as a package, but they are also available individually.
Model Description
AWH-100 Hex wrench holder with wrenches
Complete procedural documentation for the calibration of handheld inspection equipment
CRC-MT4000 including: O.D. & I.D. micrometers, calipers, depth micrometers, ring and plug gages, and
more.
MT-4-USB Digital readout software module with digital data acquisition card w/ CERTIFI TF-SB-1
Thread Disk software for calculating critical setting dimensions for threads. Includes UN
TDWIN
Series, Acme, Stub Acme, ISO Metric, and 7° X 45° Buttress thread forms.
TF-2R ⅜” diameter carbide anvil set TF-CR
TF-SB Adjustable height support table

TF-SB-1 Bearing rail support base
TF-XYT Adjustable height support table, X-axis & Y-axis support base
TW-50 50 in-lb torque wrench with 5/32” hex wrench adapter
Cylindrical Ring & Thread Ring and Plug Gage Accessories
TF-1F Flat face setting blocks
TF-1F-C Carbide flat face setting blocks
TF-CP Ball contact holders, .500 ID measurement
Set of 3 fixtures for measuring cylindrical ring gages and bores. CR-1 (.170”-.249”), CR-2 TF-IT
TF-CR
(.250”-.879”), CR-3 (.880”- Larger)
Internal threaded ring arm P.D. module (for solid threaded ring gages). Contains ball
TF-IT contacts and holders for 6, 8, 10, 12, 14, 16, 18, and 20 pitch 60° threads (Diameter range
1.500” & Larger).
TF-SP-S
TF-SP-5 For vertically holding gage pins .062” - .500”
TF-SP-75 For vertically holding gage pins .062” - .750”
Calibration fixture for NPT, NPTF and ANPT tapered plug gages (includes wire for 27, 18,
TF-TP
14, and 11½ pitch threaded plugs). (Requires TF-2R blocks)
Thread Wire Holder Modules for UN, Acme, and Metric Threads
TF-WS
All wire holders require TF-2R Blocks and are supplied with one set of wires. Please specify pitch required.
Note: “__” denotes pitch, ex. TF-WHV-12 = 60° thread wire holder module with wires 12 pitch.
60° thread wire holder module with your choice of wires. Please select one pitch from the
TF-WHV-__
following range: 5 pitch to 48 pitch
TF-TP
TF-WHVP-__
following range: 1 pitch to 4 pitch or 56 pitch to 72 pitch
TF-WHA-__
following range: 4 pitch to 20 pitch
TF-WHAP-__ 29° thread wire holder module with your choice of 2 pitch or 3 pitch wires TF-CP
Metric thread wire holder module with your choice of wires. Please select one pitch from
TF-WHM-__
the following range: 0.5 mm pitch to 0.8 mm pitch or 5 mm pitch to 6 mm pitch
Metric thread wire holder module with your choice of wires. Please select one pitch from
TF-WHM-__
the following range: 1.0 mm pitch to 4.5 mm pitch
Thread wire holder Set. Contains wires and holders for 6, 8, 10, 12, 14, 16, 18, 20, 24, 28
TF-WSV
and 32 pitch 60° threads.
Thread wire holder Set. Contains wires and holders for 4, 5, 6, 8, 10, 12, 14 and 16 pitch
TF-WSA
Acme 29° threads.
Thread wire holder set. Contains wires and holders for .5, .6, .75, 1.0, 1.25, 1.5, 2.0, 3.0,
TF-WSM
4.0 and 5.0 pitch metric 60° threads.
TF-WH-__ Wire holder only (Indicate V, A, or M and then wire size or pitch)
Phone: 713-472-7360 • Fax: 713-472-7241 135

Gagemaker Products
TF-1F
TF-SS MIC TRAC System Options
The following accessories are available for larger requirements for either the MIC TRAC 3000 or
MIC TRAC 4000.
TF-SA Model Description

Complete Calibration Package
CAL-PAK Includes: TF-1F, TF-CA, TF-DG, TF-IND, TF-LG-2, TF-LG-3, TF-SA, TF-SS, TF-SV, TF-VB,
and storage case (included with a MT-4000 Package (PGC-12-W2, etc.))
TF-IND AGD dial indicator. Calibration fixture (includes .375” and 8mm bushing)
TF-CA TF-DG Calibration fixture for depth micrometer*
TF-CA Caliper calibration accessory dial, digital and vernier calipers. Includes TF-SA support arm.
TF-TI Test indicator calibration block*
TF-IND
TF-VB TF-SA Support arm for TF-CA.
TF-SS Straight support accessory for support of extended probes*
TF-SV “V” support accessory for calibrating micrometers and standards**
TF-VN “V” blocks for calibration of axial travel probes and bore gages
TF-1F Flat face setting block set (2 blocks) 1.5000” outside diameter
TF-SV TF-BA Base support block for setting dial bore gages**
TF-VB “V” block fixture for calibration of Gagemaker’s TH-3004 and MRP-2002 Upper arms*
TF-DG TF-LG-2 Lead gage calibration fixture for either Allen or Gagemaker gages (LG-5002)
TF-LG-3 Gagemaker lead gage (LG-5003) calibration fixture*
TF-BI Base support plate for setting dial bore gages**
TF-LG-2 TF-CG Universal clamping fixture for calibration of indicators and gages*
TF-LG-3 Complete procedural documentation for the calibration of handheld inspection equipment
CRC-MT3000
including: O.D. & I.D. micrometers, calipers, depth micrometers, and more. (MT-3000 ONLY)
TF-VN Complete procedural documentation for the calibration of handheld inspection equipment
CRC-MT4000 including: O.D. & I.D. micrometers, calipers, depth micrometers, ring and plug gages, and
more. (MT-4000 ONLY)
TF-BA *1 TF-1F block required with this accessory
**2 TF-1F blocks required with this accessory
TF-BI
Bench Calibrator
TF-CG
The Gagemaker bench calibrator, CG-1001/CG-1001E, calibrates gages and indicators per AGD
specification. The CG-1001 uses a non-rotating spindle screw type micrometer which reads directly
to .0001” and can be estimated to the closest .00005".
Disassembling the gage is not required for calibration. The vise assembly allows full vertical and
CRC-3000
horizontal adjustment of the gage or indicator clamped in the vise jaws. During calibration, an
outboard arm and arm support allows for larger gage assemblies to be securely supported. Four
CG-1001
supplied accessory fixtures will help speed up calibration while maintaining accuracy.*
The CG-1001 is our standard bench calibrator, while the CG-1001E is our digital version which
includes an SPC output.
Bench Calibrators are shipped in a durable custom shipping/storage case. Optional wooden storage
cases are available.
Model Description Range Accuracy
CG-1001 Bench Calibrator .0001” Resolution, Mechanical ±.0001
Digital Bench Calibrator Gage w/

CG-1001E .00005”/.001 mm Resolution, Digital ±.00015
SPC Output
CG-1001E *Individual replacement fixtures are available for purchase but not listed above.
Please call for more information.

API 6A Seal Ring Groove Gages (BX/RX)
BX-900
Face Groove and Hole Location Gages

Gagemaker’s face groove gages inspect groove diameters and groove widths. Excellent for inspecting
hoel locations. Additional extensions for various lengths are available, please contact customer
service for more.
Model Description Range BX-1000
BX-900 Ball Mic Gage w/ Ball Points (no indicator) BX, R, RX Grooves, Diameters 2.6” - 13”
BX-1000 6B Groove Diameter Gage w/ T188 Points BX, R, RX Grooves, Diameters 2.6” - 13”
BXG-1000 6B Groove Width Gage w/ T072 Points BX, R, RX Grooves, Widths .375” - 1.5”
BXG-1002 Special Groove Width Gage w/ T072 Points Special Groove, Widths 2.0”
BX-R13 Optional Extension rod for BX-1000, 13” Groove Diameters to 13”
PD-BX BX/BXG Setting Gage, ½” X ½” U-notch
Face Groove and Hole Location Gage Setting Masters
Model Description Model Description BXG-1000
FSBX-150 Setting Master for BX-150 FSBX-162 Setting Master for BX-162
BX - Dog Bone/Paddle Gage

DBBX-150 Dog Bone Ring Groove Gage BX-150 DBBX-162 Dog Bone Ring Groove Gage BX-162 Face Groove and Hole Location Standards
(FSBX)
DBBX-151 Dog Bone Ring Groove Gage BX-151 DBBX-163 Dog Bone Ring Groove Gage BX-163
DBBX-153 Dog Bone Ring Groove Gage BX-153 DBBX-165 Dog Bone Ring Groove Gage BX-165 PD-BX
DBBX-159 Dog Bone Ring Groove Gage BX-159 DBBX-171 Dog Bone Ring Groove Gage BX-171 PD-BX Setting a BX-1000
Phone: 713-472-7360 • Fax: 713-472-7241 137

Gagemaker Products
BX - Groove Profile & Width GO/NO GO Gage

BXP-150 GO/NO GO Profile Gage BX-150 BXP-162 GO/NO GO Profile Gage BX-162
DB-R36
R & RX - Dog Bone/Paddle Gage

BX- Groove Profile &
Width Go/NoGo Gage
DB-R20 Dog Bone Ring Groove Gage R-RX20 DB-R57 Dog Bone Ring Groove Gage R-RX57
BX- Dog Bone Paddle Gage
R & RX DB-R44 Dog Bone Ring Groove Gage R-RX44 DB-R86 Dog Bone Ring Groove Gage R-RX86
Dog Bone Paddle Gage DB-R45 Dog Bone Ring Groove Gage R-RX45 DB-R87 Dog Bone Ring Groove Gage R-RX87
(DB-R23)
DB-R54 Dog Bone Ring Groove Gage R-RX54
R-RX - Groove Profile & Width GO/NO GO Gage

Model
Corresponding R Groove Size
(RP-Depth-Width)*
RP-250-344 R 20
RP-310-469 R 23 to R45, R49, R53, R57, R65, R69, R82, R84, & R99
RP-380-531 R46, R73, R85
RP-440-656 R50, R54, R66, R86, R87
RP-500-781 R47, R70, R74, R88
RP-560-906 R90
RP-620-1063 R63
RP-690-1313 R91
*ex. RP-250-344 = .250”(depth), .344” (width)

Groove Width Amplifier Gages
Groove width amplifier gages use flushpins to indicate acceptance or rejection.
Model Description Groove Width

AG-BX150 Groove Width Amplifier Gage, BX-150 0.450”
AG-BX155 Groove Width Amplifier Gage, BX-155 0.698” AG-BX156

AG-BX151
CamLock Micrometers
The CamLock micrometers measure API weld flange thickness. Supplied with verification standard.
Replacement standards are available separately, please call for quotation.
CL-1001 CamLock Micrometer- 25° 0” - 1”

CL-1002 with Verification Standard
Phone: 713-472-7360 • Fax: 713-472-7241 139

Gagemaker Products
SBG-5000E
Stator Minor Bore Inspection
SBG-5000A
Stator Bore Gages
The SBG series of gages determines a precise stator/rotor match by measuring the largest and
smallest bore diameters. SBG-5000 gages measure diameters from 1.500” - 7.500” and are available
in three models: an analog indicator (SBG-5000A), a digital indicator (SBG-5000D), and an electronic
(SBG-5000E). Attaching or removing different height extension shoes achieves the gage’s range
flexibility. All gage models can address any pitch or lobe configuration.
The SBG-5000A and SBG-5000D include three extension shoes and setting standard base without a
setting standard.
The SBG-5000E includes three extension shoes, interface box, a computer, measurement software,
necessary cables, and setting standard base without a setting standard.
Custom sized standards, round standards, and shoes are available. Setting standards are sold
separately. See the chart on page 141 for setting standard sizes.

Stator Bore Gage with analog indicator & SB-2100,
SBG-5000A 1.500” - 2.000”*
SB-2110, and SB-2120 extension shoes
Interface Stator Bore Gage with digital indicator & SB-2100,

SBG-5000D 1.500” - 2.000”*
Box & SB-2110, and SB-2120 extension shoes
Computer
Electronic Stator Bore Gage with interface box,
SBG-5000E computer, software, standard base, & SB-2100, 1.500” - 2.000”*
SB-2110, and SB-2120 extension shoes
*Additional shoes are required for diameters exceeding 2.000”.
SBG-5000A, SBG-5000D & SBG-5000E Extension Shoes

The style of extension shoe depends on the diameter range being measured. Shoes are offered in
SBG Connection several lengths depending on the pitch of the stator lobes. It is important that the shoe length be long
Cable
enough to contact a minimum of two points on the bottom and one point on the top pad. Custom
shoes are available as special request. Contact Gagemaker for more infomation.

SBG Extension
Shoes SB-2100 8” long extension shoe 1.500” – 1.650”
SB-2200 20” extension shoe (requires riser)

SBG-5000A, SBG-5000D, & SBG-5000E Flat Standards
Setting standards do not need to be sized to the exact bore of the stator’s bore. As long as the size of
the standard is within the measurement range of the gage, it can be used to preset the gage.
Custom sizes and round standards are available as special requests.
Setting Master Flat Standard Setting Master Flat Standard

Height Model Height Model
1.600” SBFS-1600 4.640” SBFS-4640
SBG Flat Standards
1.727” SBFS-1727 4.750” SBFS-4750
1.800” SBFS-1800 4.900” SBFS-4900
2.062” SBFS-2062 5.060” SBFS-5060
2.187” SBFS-2187 5.150” SBFS-5150
2.375” SBFS-2375 5.240” SBFS-5240
2.598” SBFS-2598 5.350” SBFS-5350
2.700” SBFS-2700 5.420” SBFS-5420
2.736” SBFS-2736 5.500” SBFS-5500
2.900” SBFS-2900 5.600” SBFS-5600
3.080” SBFS-3080 5.750” SBFS-5750
SBG Extension Shoes
3.150” SBFS-3150 5.850” SBFS-5850
3.245” SBFS-3245 5.960” SBFS-5960
3.303” SBFS-3303 6.050” SBFS-6050
3.400” SBFS-3400 6.140” SBFS-6140
3.425” SBFS-3425 6.250” SBFS-6250
3.500” SBFS-3500 6.375” SBFS-6375
SBG Risers
3.625” SBFS-3625 6.500” SBFS-6500
3.750” SBFS-3750 6.600” SBFS-6600
3.976” SBFS-3976 6.750” SBFS-6750
4.000” SBFS-4000 6.860” SBFS-6860
4.160” SBFS-4160 6.950” SBFS-6950 SB-2200 with Riser
4.250” SBFS-4250 7.040” SBFS-7040
4.370” SBFS-4370 7.220” SBFS-7220
4.520” SBFS-4520 7.375” SBFS-7375
4.567” SBFS-4567 7.450” SBFS-7450
SBG-5000A, SBG-5000D & SBG-5000E Extension Shoes

The style of extension shoe depends on the diameter range being measured. Shoes are offered in
several lengths depending on the pitch of the stator lobes. It is important that the shoe length be long
enough to contact a minimum of two points on the bottom and one point on the top pad. Custom SBG-4500
shoes are available as special request. Contact Gagemaker for more infomation.

SB-2200 20” extension shoe (requires riser) SBG-3500
Phone: 713-472-7360 • Fax: 713-472-7241 141

Gagemaker Products
Rotor Inspection
Today in the oil field industry, unique high-performance power sections require accurate measurement
tools for rotors and stators. Gagemaker has designed several gages to measure various parts of the
rotor.
Rotor Major Diameter Micrometer (T-MIC)

Due to high spirals on the lobes, conventional measurement gages cannot be used for measuring rotor
major diameters. Gagemaker developed the T-MIC to measure a rotor’s major diameter. The T-MIC’s
base spans across two lobes on one side of the centerline and uses a micrometer thimble on the other
to measure the diameter. Instead of modifying an existing micrometer, Gagemaker custom builds
each T-MIC. Gagemaker’s rugged design far exceeds all others on the market today. Special sizes are
available, contact customer service for more information. Special sizes, metric thimbles, and metric
sizes are available.

0" - 1" TM6-0-1 TM8-0-1 TM12-0-1 TM18-0-1 TM24-0-1
1" - 2" TM6-1-2 TM8-1-2 TM12-1-2 TM18-1-2 TM24-1-2
2" - 3" TM6-2-3 TM8-2-3 TM12-2-3 TM18-2-3 TM24-2-3
TM12-4-5
3" - 4" TM6-3-4 TM8-3-4 TM12-3-4 TM18-3-4 TM24-3-4
T-MIC for Rotor,
4" - 5" TM6-4-5 TM8-4-5 TM12-4-5 TM18-4-5 TM24-4-5
½" wide base
5" - 6" TM6-5-6 TM8-5-6 TM12-5-6 TM18-5-6 TM24-5-6
6" - 7" TM6-6-7 TM8-6-7 TM12-6-7 TM18-6-7 TM24-6-7
7" - 8" TM6-7-8 TM8-7-8 TM12-7-8 TM18-7-8 TM24-7-8
8" - 9" TM6-8-9 TM8-8-9 TM12-8-9 TM18-8-9 TM24-8-9
Rotor Major Diameter T-Micrometer with Digital Micrometer

Gagemaker also offers our T-MICs with digital micrometers. The digital micrometer can transfer your
data to a computer via the included SPC output. Special sizes, metric thimbles, and metric sizes
are available.

0" - 1" TM6-0-1-352 TM8-0-1-352 TM12-0-1-352 TM18-0-1-352 TM24-0-1-352
1" - 2" TM6-1-2-352 TM8-1-2-352 TM12-1-2-352 TM18-1-2-352 TM24-1-2-352

T-MIC for
2" - 3" TM6-2-3-352 TM8-2-3-352 TM12-2-3-352 TM18-2-3-352 TM24-2-3-352 Rotor,
TM12-2-3-352 3" - 4" TM6-3-4-352 TM8-3-4-352 TM12-3-4-352 TM18-3-4-352 TM24-3-4-352 ½” wide base
with a
4" - 5" TM6-4-5-352 TM8-4-5-352 TM12-4-5-352 TM18-4-5-352 TM24-4-5-352 Mitutoyo
50-352-10
5" - 6" TM6-5-6-352 TM8-5-6-352 TM12-5-6-352 TM18-5-6-352 TM24-5-6-352 digital microm-
6" - 7" TM6-6-7-352 TM8-6-7-352 TM12-6-7-352 TM18-6-7-352 TM24-6-7-352 eter and SPC
output
7" - 8" TM6-7-8-352 TM8-7-8-352 TM12-7-8-352 TM18-7-8-352 TM24-7-8-352
8" - 9" TM6-8-9-352 TM8-8-9-352 TM12-8-9-352 TM18-8-9-352 TM24-8-9-352

Rotor Minor Diameter Micrometer (MM)
Gagemaker’s minor diameter MIC gage was designed to measure a rotor’s minor diameter. The spiral
lobes on the rotor produce a valley, or minor diameter. The depth of the minor diameter from the
major diameter requires a 1” travel indicator stem. Gage range is 0” - 6”, which allows measuring
most rotor sizes with only one gage. Ensuring the gage’s durability and long life, Gagemaker’s design
uses a heavy duty indicator stem and bearing housing to withstand side loads. Special sizes are
available. MM-0-6

MM-0-6 Minor diameter micrometer 0" - 6"
Core Alignment Gage

Verification that the core was properly placed when the stator was molded is easily checked using the
Core Alignment Gage. The gage is supplied with brass alignment inserts that match the thread of the
injection ports. The digital gage plunges a needle through the rubber to contact the core. Measurements
are made at 180° locations to verify that the core is indeed centrally located to the OD of the stator.

CAW-2000 Core alignment gage 0” - 3”
Rotor Saddle Gage

The rotor saddle gage, also known as a rotor lobe height gage, is the last weapon in the inspection
arsenal. This gage sets on top of the spiral lobes of the rotor and measures the variation in lobe
height. Sliding the gage along the length of the rotor detects variation in root to crest height of all the
lobes. Measurements can be taken at 90° or 180° intervals to provide an accurate dimensional map CAW-2000
of the relationship between lobes. This inspection aids in manufacturing the rotor to specification.
Model Description Travel Pipe Diameter Range

RSG-7 Rotor saddle gage, 7” long 1” 1” - 4”
RSG-16
Phone: 713-472-7360 • Fax: 713-472-7241 143

Gagemaker Products
Pin Seal Diameter Gages

The Pin Seal Diameter Series of gages inspect critical pin seal diameters and seal tapers on premium
connections. With the addition of stand-off plates, the gages also inspect seal tapers. Each model
PN-3001 covers a specific range of connection sizes, making the PN-3000 gages extremely versatile and
economical.
The PN-3000 gages use precision interchangeable contact points that position on the seal at a fixed
distance from the connection face during inspection.
Before inspecting parts, these gages must be preset to a nominal predetermined dimension using
gage blocks, Gagemaker’s Pin Seal Diameter Gage Setting Master, a MIC TRAC, or Frame Standards.
Features
• Provides accurate measurements on the gage’s indicator at the critical sealing point of the pin.
• Uses interchangeable contact points
• Inlcudes a .0005” resolution indicator.
• Requires presetting using gage blocks, Gagemaker’s Pin Seal Diameter Gage Setting Master, Frame
Standards, or MIC TRAC system.
• Allows use in a manufacturing or field environment due to durable construction
PN-3000 Series Pin Nose Diameter Gages*

View A. Customer to supply
standoff ("X")and point sizes ("T") The PN series measure pin nose diameter using contact points. Specify the distance from the face of
the connection to the measuring plane and desired contact point diameter when ordering.

PNI-3001 PN-3002 Pin Nose Diameter Gage 0” - 9½”
*There is a separate cost to reposition the point standoff of PN-3000 Gages. Quotation available upon request.
PN-3000 Series Internal “Ball Contact” Seal Diameter Gages

The PNI series measure the internal ball contact seal diameter using contact points. Specify the
distance from the face of the connection to the measuring plane and desired contact point diameter
when ordering. Larger ranges may be available as a custom order.

PNI-3001-VMB Internal “Ball Contact” Seal Diameter Gage 2” - 5½”
PNI-3002-VMB Internal “Ball Contact” Seal Diameter Gage 2” - 9⅝”
PNA-3001 PNI-3003-VMB Internal “Ball Contact” Seal Diameter Gage 2” - 13⅜”
PN-3000 Series 30° External Apex Diameter Gages

The PNA model gages measure only the external apex diameter of the connection. Larger ranges may
be available as a custom order.

PNA-3001-VMA 30° External Apex Diameter Gage, Anvils 2” - 4¼”
PNA-3002-VMA 30° External Apex Diameter Gage, Anvils 2” - 9⅝”
PNA-3003-VMA 30° External Apex Diameter Gage, Anvils 2” - 13⅜”

PN-3000 Series 30° Internal/External Apex Seal Diameter Gages
The PN-3000 Series 30° Internal/External Apex Seal Diameter gages measure both the internal and
external diameters of the apex seal for the connection.

Rotate the slider and keyway
PN-31VM-30 30° Internal/External Apex Seal Diameter “V” External 4"- 6⅝”, Internal 2⅜” - 6⅝” assembly for Internal/External
inspection
PN-33VM-30 30° Internal/External Apex Seal Diameter “V” External 4” - 14”, Internal 2⅜” - 14”
Pin Seal Diameter Gage Standoff Plates PN-31VM-30 Int./Ext.

PN-33VM-30 Int./Ext.
The pin seal standoff plates are available in various sizes. Additional custom sizes are available upon
request. Pin seal standoff plates are sold as a set of two.

PN-3000/T.04087 Pin Seal Standoff Plate* 0.04087” (1.038 mm) thick
PN-3000/T.1181 Pin Seal Standoff Plate* 0.1181” (3.00 mm) thick Customer to specify
thickness ("T")
PN-3000/T.121 Pin Seal Standoff Plate* 0.1210” (3.07 mm) thick of taper plates
PN-3000/T.3149 Pin Seal Standoff Plate* 0.3149” (8.00 mm) thick PN-3000/T
PN-3000/T.350 Pin Seal Standoff Plate* 0.3500” (8.89 mm) thick Pin Seal
Standoff Plate
*Additional plate thickness sizes are available. All plates are two per set.
The round and frame style standards are designed to

preset all models of the PN-3000 series gages for
accurate inspection of API pin end seal taper diameters
of premium connections. These standards consist of a
rigid, non-adjustable steel block machined to precise,
proper size tolerances.
Phone: 713-472-7360 • Fax: 713-472-7241 145

Gagemaker Products
Back-of-Box Gage
Back-of-Box gage measures coupling and box seal diameters. Gage must be preset with a standard.
For standards, please call for a quotation.
BB-7000 Back-of-Box Seal Diameter Gage 3.915” - 11.965”
Internal Diameter/Groove Gages

Gagemaker’s internal diameter and groove gages measure variation in internal bore diameters.
Diameter/groove gages are shipped with two .072” diameter contact points (T072) as standard. Refer
BB-7000
to the contact point pages 124-125 for the proper contact point for your particular application.

IT-5104 Internal Diameter/Groove Gage 4” Depth, 1½” - 10” Dia.
IT-5106-30 Int. Diameter/Groove Gage, points at 30° angle 6” Depth, 1½” - 10” Dia.
IT-5106-45 Int. Diameter/Groove Gage, points at 45° angle 6” Depth, 1½” - 10” Dia.
Internal Diameter/Groove Gage Replacement Parts

BB-7000 Extensions
IT-5104-04 Replacement Lower Arm 4¼”
IT-5106-06 Replacement Lower Arm 6”
IT-5104

Saddle Gage SG-8001
The Saddle Gage measures the amount of hook or bend at the end of a joint of pipe. The SG-8001
uses the RC-375 roller contact.

SG-8001 Saddle Gage All Sizes
SG-8001-TA SG-8001 Tube Assembly
RC-375 0.375” Diameter Roller Contact
Squareness Gage
The SQ-1600 Squareness gage monitors the alignment of weld-on connectors to the pipe body.
Requires setting by a qualified standard. The SQ-1630S, our precision calibration square, is strongly SQ-1648
recommended for best results. Standard sold separately.
Model Description Range SQ-1636S
SQ-1636 Squareness Gage, 30” reach Up to 36” diameter

SQ-1648 Squareness Gage, 30” reach Up to 48” diameter
SQ-1636S Squareness Gage Standard 14” X 36” Square
Straight Edge Gage SQ-1636
The SE-1000 Straight Edge gage measures the straightness of well tubing and casing. The gage
price includes an SES-1000 Standard. Replacement standards are available.

SE-1000 Straight Edge 36” - 64”
SES-1000 Replacement Straight Edge Standard SE-1000
Laser Alignment Gage

The Laser Alignment Gage ensures proper angular and parallel alignment during assembly of weld-on
connectors. Replacement parts are available.
SES-1000
Model Description Inside Diameter Range Outside Diameter Range
LA-3600 Laser Alignment Gage 11” - 55” 8” - 50”
Ovality Gage
Ovality gages are designed to check the out-of-round condition of tubular goods prior to processing.
Gagemaker’s OV-9800 series offers diameter adjustability within a size range. Stabilizing rollers are
adjustable for diameter as well as for alignment to the centerline.
Model Description Range LA-3600
OV-9801 Ovality Gage, pipe ovality 2” - 6”

OV-9802 Ovality Gage, pipe ovality 6” - 10”
OV-9803 Ovality Gage, pipe ovality 10“ - 14”
OG-9801
Phone: 713-472-7360 • Fax: 713-472-7241 147

Gagemaker Products

Depth Gages
DG-1008 Our digital depth gages inspect the location of internal and external shoulders and grooves from the
face of pin and box connections or other datum surfaces. The DG-1000 Series is available with the
standard base, a 12” base, and a 20” base. These gages are available in ranges: 0”-8”, 0”-12”, 0”-18”,
and 0”-24”.
The standard gage (DG-1000 Series) is supplied with a 7” extension arm and a 0° and 45° contact
point holder for use with any #4-48 threaded contact point (one .072” contact point (T072) supplied
unless otherwise requested). Longer extension arms and other contact point configurations and
adapters are available upon request. The 12” (DG-1200 Series) and 20” (DG-2000 Series) gages
include one double sided blade contact instead of a contact point and a contact point holder.
Digital depth gages do not require a setting standard. The gage is preset to zero on any flat surface
and then applied to the product. Actual length measurements display on the gage’s digital readout.
Features
• Inspects internal and external shoulder and groove locations.
DG-1008 with • Uses an interchangeable contact point or blade that can service many different applications.
DG-1000-R7
Extension Arm
• Inch/metric conversion with digital readout
• Digital readout with .0005”/.01 mm resolution and SPC Output

Depth Gage with Digital Display (in/mm)
DG-1208
DG-1024 Depth Gage w/ digital display (in/mm), .0005”/.01 mm resolution 0" - 24"
Depth Gage with Digital Display (in/mm) and 20” Base (in/mm)
DG-1012 with DG-2018 Depth Gage w/ digital display (in/mm), .0005”/.01 mm resolution, 20" base 0” - 18”
DG-1000-R36 Stabilzer
Depth Gage Accessories
DG-1000-R7 7” Extension Arm
DG-1000-R36 Stabilizer for larger diameters 36" & Larger
DG-DSB-1824 DG-DSB-812
DG-1000-BPA DG-1000 Base Plate Assembly
DG-1212-DF Shoulder Location Double Foot for DG-1208 and DG-1212
DG-1218-DF Shoulder Location Double Foot for DG-1218 and DG-1224
DG-B-812 Blade Contact for 8 and 12 inch ranges for DG-1200/2000 8 & 12
DG-P45-1824 DG-P45-812 DG-B-1824 Blade Contact for 18 and 24 inch ranges for DG-1200/2000 18 & 24
DG-DSB-812 Double Sided Blade Contact for 8 and 12 inch range DG-1200/2000 8 & 12
DG-DSB-1824 Double Sided Blade Contact for 18 and 24 inch range DG-1200/2000 18 & 24
DG-GV-812 Groove Locator, .100” thick for DG-1008 and DG-1012 8 & 12
DG-GV-1824 DG-GV-812 DG-GV-1824 Groove Locator, .100” thick for DG-1018 and DG-1024 18 & 24
DG-P45-812 45° Point Holder for DG-1008 and DG-1012 8 & 12
DG-P45-1824 45° Point Holder for DG-1018 and DG-1024 18 & 24

Torque Shoulder Gages and Standards
Both the TS-1000 and TS-4000 series of gages accurately measure the distance between the primary
and secondary torque shoulders on both internal and external threaded connections. Used industry
wide to measure the shoulder-to-shoulder distance on premium tool joints and the face-to-seal
location on premium couplings, Gagemaker TS gages are also perfectly suited to locate grooves from TS-1000
various datum surfaces.
The TS gages require a setting standard. The gage is preset to the desired dimension and deviation is
read from the gage’s dial indicator.
The TS-1000 is supplied with a 6” extension arm. A 45° contact point holder for use with any #4-48
threaded contact point is also supplied. Longer extension arms, other contact points, and
adapters are available upon request.
Features
• Inspects internal and external shoulder and groove locations
• Uses an interchangeable contact point that can service many different applications

TS-1000-1 Shoulder Depth Gage, Base length 6”, .0001” Indicator 1” - 6” TSS-1000

TS-1001-1 Shoulder Depth Gage, Base length 12”, .0001” Indicator 1” - 10”
TS-4000 Shoulder Depth Gage (Specify Taper) 2⅜” & Larger
Thread Data TS-4000
Thread Data Chart

The Gagemaker API Thread Data Chart provides critical thread data per API Specification 5B.
Model Description Connections

API Tubing and Casing Thread Dimension 2⅜” - 20” 8-Round, LTC, STC
Thread Data Chart
Slide Chart 4½” - 20” Buttress
TSS-4000
Thread Data Chart
Phone: 713-472-7360 • Fax: 713-472-7241 149

Gagemaker Products
Specialty Items
CA-9001
Coupling Alignment
The Coupling Alignment gage ensures that the threads on both ends of the coupling are properly
aligned with each other.

CA-9001 Coupling Alignment Gage 2⅜” & Larger
Internal Deep Reach Bore Gages

DB-1800 The DB series of gages are internal deep reach bore gages. Internal deep reach bore gages allow the
difficult measuring of pitch diameter deep inside a small diameter product. One set of contact points
and one set of extension rods are included.

DB-1800 Internal Deep Reach Bore Gage, 18” reach min. bore 1.700”
DB-2400 Internal Deep Reach Bore Gage, 24” reach min. bore 1.700”
PD-3003
Pit Depth Gages
The PD-3000 series of gages inspect the depth of surface pitting on tubular goods. The gage also
accepts other types and sizes of contact points for use in other applications, such as groove and
thread depth inspection. Select the PD-3000 gage model based on the type of indicator required.
PD-3004 Model Description Range

PD-3003 Pit Depth Gage, AGD #1, 0-100 .250
PD-3004 Pit Depth Gage, AGD #2, 0-100 .450
PD-3005 Pit Depth Gage w/ Flat Base, AGD #2, 0-100 .450
PD-3006 Pit Depth Gage w/ 6" Long Flat Base, AGD #2, 0-100 .450
PD-3005 PD-3007 Pit Depth Gage w/ 6" Long V Base, AGD #2, 0-100 .450
PD-3000BF Pit Depth Flat Base Only
PD-3000BV Pit Depth V Base Only
PD-3000BF-6 Pit Depth 6" Long Flat Base Only
PD-3000BF-10 Pit Depth 10" Long Flat Base Only
PD-3000BV-6 Pit Depth 6" Long V Base Only
PD-3004-6 Power Tight Make-up Gage

The Power Tight Make-up Gage, PT-4000, adjusts to determine the proper make-up location of API
couplings.
PD-3000BF-6
PT-4000 Power Tight Make-up Gage All Sizes
Standoff Gages
PT-4000
The ST-7001 measures variation in ring and plug gage standoff on rotary shouldered connections.
The ST-7001 is supplied with a setting standard. The ST-7002 is set on any qualified surface.
ST-7001
ST-7001 Indicator Standoff Gage w/ Setting Standard .615” - .635”
ST-7002 RSC Box Standoff Gage to measure plug stand-in, .0005” resolution 0” - .01” stand-in
STS-7001 STS-7001 Setting Standard Replacement, .625" width
ST-7002

Wall Thickness Gages
The WT-9000 series of gages measures wall thickness at specific distances from the end of the pipe.
Specify the distance from the end of the pipe to the measuring plane when ordering.

WT-9001 Wall Thickness Gage 2⅜” - 4½”
WT-9002 Wall Thickness Gage 4½” - 9⅝”
WT-9003 Wall Thickness Gage 4½” - 13⅜”
WT-9001
Gage Storage Cases
Gagemaker promotes three types of gage storage cases in various sizes- heavy-duty, standard, and
wooden. The two plastic types are constructed of durable ABS molded plastic material.
The PEL Series of heavy-duty plastic cases, manufactured by Pelican, are extremely sturdy and can
be used to ship and store gages. These cases not only provide extra protection for gages, but they are
watertight, airtight, dustproof, and crushproof.
The CASE Series are our standard plastic cases. They are constructed from durable ABS molded
plastic. These cases are low impact resistant and lightweight.
PEL
Series
The WOOD Series of cases is our line of rugged, handcrafted wooden cases. If necessary, wooden
cases can be customized to your specifications.
All storage cases are available with foam inserts at additional cost. Also, foam inserts can be custom
cut for any of our products. Custom cutting of foam for cases is priced on an hourly basis. Please
call for a quotation.
WOOD
Model Inside Measurements Model Inside Measurements Series
PEL-1400 12¼” X 9¼” X 5¼” PEL-1600 22” X 17” X 8”
PEL-1450 15” X 10⅜” X 6“ PEL-1700 36” X 13½” X 5”
PEL-1500 17⅞” X 11¾” X 6⅛” PEL-1750 50¾” X 13½” X 5”
PEL-1550 19⅞” X 13¼” X 7¾”
Model Inside Measurements Model Inside Measurements

CASE-1 16” X 11” X 3” CASE-5 21½” X 14½” X 6⅝”
CASE-2 14” X 10” X 3” CASE-6 8⅝” X 5⅝” X 3⅛" CASE
Series
CASE-3 9” X 12½” X 2¾” CASE-7 21" X 14" X 6"
CASE-4 7” X 4” X 2”
Model Inside Measurements Model Inside Measurements

WOOD-A 54" X 17" X 3½" WOOD-J 27" X 10" X 3.5" Foam
WOOD-B 48" X 10" X 3½" WOOD-J-1 27" X 9" X 3½” Inserts
WOOD-B-1 46" X 26" X 3½" WOOD-K 26" X 15" X 3½”

WOOD-C 44" X 8" X 3½” WOOD-L 25" X 10" X 3½"
WOOD-D 42" X 24" X 3½” WOOD-M 22" X 12" X 3½”
WOOD-E 42" X 10" X 3½” WOOD-N 22" X 8" X 3½"
WOOD-F 35" X 12" X 3½” WOOD-O 21" X 8" X 3½"
WOOD-G 34" X 10" X 3½” WOOD-P 17" X 10" X 3½"
WOOD-H 34" X 8" X 3½" WOOD-Q 15" X 15" X 3½"
WOOD-I 33" X 21" X 3½”
Custom Cut
Foam
Phone: 713-472-7360 • Fax: 713-472-7241 151

CUSTOMER SERVICE
For any questions, quotations, requests, technical support or any other information, please contact one of our representatives
at any of the following:
Address: Gagemaker LP
712 East Southmore Ave.
Pasadena, TX 77502-110
Fax: 713-472-7241
Phone: 713-472-7360
Monday - Friday : 8am - 5pm CST
Website: http://www.gagemaker.com
E-mail: gagemaker@gagemaker.com or sales@gagemaker.com
TECHNICAL SUPPORT
Gagemaker technical support is available through contacting our friendly customer service department at any of the above
options.
QUOTATIONS
Quotations are valid for 30 days after the date on the quote. Please refer to the customer service section for contact information
for quotations.
PICK UP/WALK-IN/COLLECTION
Some of our products are available for pick up directly from our Pasadena facility. Please contact us if you would like a direct
pickup. Notify us of your intentions to pick up products a minimum of 2 hours in advance of your arrival.
SHIPPING POLICY
Unless otherwise requested, Gagemaker ships once an order is complete. If you would like a partial order shipped, please
contact customer service or indicate when ordering.
HANDLING CHARGE
Gagemaker will charge a $10 (USD) handling fee for ALL orders on products invoiced for LESS than $50 (USD). No fee will be
applied to orders invoicing for over $50 (USD).
RETURN POLICY
Gagemaker requires a 15% restocking fee on all non-defective returns, except for MIC TRACs (either the MT-3000 or MT-
4000) which will be charged a 20% restocking fee. Items not listed in our catalog are not returnable.
Returns may be accepted up to 30 days after the date of the invoice. Please return products to the address listed in our
Customer Service section. Please contact Gagemaker for a Return Goods Authorization (RGA). Contact our Customer Service
for any questions regarding your return. Special or custom orders cannot be returned.
Defective products must be returned 15 days from the date of receipt in order to be eligible for a full refund. Defective
products are not subject to any restocking fee. For defective product information, please see our Product Warranty section.
PRODUCT WARRANTY
Gagemaker warrants its products to be free from defects in material and workmanship under normal operating conditions for
12 months from the date of shipment. This warranty is limited to repairing, or at Gagemaker’s option, replacing any product
which is proven to have been defective at the time it was shipped and/or suffered damage during shipping, provided buyer has
given Gagemaker written notice of any such claimed defect within 15 days of receipt. Any defective product must be properly
packed and shipped to the Gagemaker factory in Pasadena, Texas USA. This warranty applies to all products when used in a
normal industrial environment. Any unauthorized tampering, misuse or neglect will make this warranty null and void. Under
no circumstances will GAGEMAKER or any affiliate have any liabilities for loss or for any indirect or consequential damages.
The foregoing warranties are in lieu of all other warranties expressed or implied, including but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
Return products for repair or calibration to:
Gagemaker LP
712 East Southmore Ave.
Pasadena, TX 77502-110
Index
Page Page
B F (Cont.)
Back-of-Box Gage 146 Functional Size Gages, Tapered 110
BB-7000 146
Bench Calibrator Gages 93, 136 G
Box Seal Gages 64 Gage Storage Cases 151
BR-2001 66, 127 Groove Width Amplifier Gages 139
Buttress Runout Gage 66, 127
BX Series Gages 137 I
BX-1000 137 Indicators 130-131
BX-Dog Bone Paddle Gage 137 Indicator Replacement Parts 131
BX-Groove Profile & Width GO/NO GO Gage 138 Indicator Standoff Gage 150
BXG-1000 137 In-House Precision Gage Calibration System 90-91, 134
Insert Identifiers 44, 127
C Internal Deep Reach Bore Gages 150
Calibration & Repair Services 98-101 Internal Diameter/Groove Gages 146
CA-9001 150 Internal Functional Size Gages 12, 116
CAL-PAK 92, 136 Internal PD Thread Inspection Gages 14, 114
CamLock Micrometers 139 Internal Pitch Diameter Inspection Gages 14, 114
CG-1001 93, 136 Internal Taper Gages 32, 50, 115
CL-1000 Series 139 Internal Thread Height Gages 18, 34, 52, 122
Contact Points 124-125 IT-5100 Series 146
Contact Points, Rotary Shouldered Connections 47, 49, 51, 124-125 IT-5104-RSC 47, 113
Contact Points, Straight Threads 15, 17, 124-125 IT-6000 32, 50, 115
Contact Points, Tubing and Casing Gages 29, 33, 124-125 IT-6001 & Replacement Parts 32, 115
Core Alignment Gage 143
Coupling Alignment Gage 150 J
CRC-MT3000 92, 136 JSS Inspection Solutions 38-39
CRC-MT4000 92, 136
Crest Diameter and Ovality Gages 30, 58-59, 104 L
Crest Diameter and Ovality Gage Standards 30-31, 106-109 Laser Alignment Gage 63, 147
Custom Gages 80-81 Lead Gage Setting Standards 16, 29, 49,121
Lead Gages 16, 28, 48, 120
D LG-5001 Series 120
DB-1800, DB-2400 150 LG-5002 Series 16, 28, 48, 120
Deep Bore Internal Functional Size Gage 116 LG-5003 Series 16, 28, 48, 120
Depth Gages 60-61, 148 LPB Templates 46, 112
Depth Gage Accessories 148 LPP Templates 46, 112
DG-1000 60-61,148 Location Profile Templates 46, 112
Dial Indicators 130-131 LS-1000 Series 121
Digital Indicators 131
DPG-6000 116 M
MIC TRAC 3000 88-89, 132
E MIC TRAC 3000 Accessories 92, 136
ET-7000 Series 32, 50, 115 MIC TRAC 4000 90-91, 134
External Functional Size Gages 12, 116 MIC TRAC 4000 Accessories 91-92, 135-136
External PD Thread Inspection Gages 14, 114 MIC TRAC Calibration Chart 84-85
External Pitch Diameter Gages 14, 114 MIC TRAC Setting Blocks 133
External Taper Gages 32, 50, 115 MIC TRAC System Options 92, 136
External Thread Height Gages 18, 34, 52, 122 MM-0-6 76, 143
MRP Frame Style Standards (excluding MRP-5000) 108-109
F MRP Rod Style Standards (excluding MRP-5000) 30-31, 106-107
Face Groove & Hole Location Gages 137 MRP-1000, MRP-1500 30, 58, 104
Face Groove & Hole Location Setting Masters 137 MRP-2000, MRP-2500 30, 58-59, 104
Frame Style Setting Standards for MRP Series (non-5000) 108-109 MRP-3000, MRP-3500 59, 104
Functional Size Gages, Straight 12,116 MRP-5000 110
154
Page Page
M (Cont.) S (Cont.)
MRP-5000 Frame Style Standards 111 SPG-6000 118
MRP-5000 Replacement Parts 110 SPG-6000 Thread Rolls 118
MRP-5000 Thread Rolls 110 Squareness Gage 62, 147
MRP Pitch Diameter and Ovality Gages 30, 58-59, 104 SQ-1636, SQ-1648 62, 147
MRP Replacement Parts 105 ST-7001 150
MRP Step Style Standards 109 Standoff Gage and Setting Standard 150
MT-4-USB 92, 132 Straight Thread Insert Identifiers 127
Straight Thread Inspection Solutions 6-7
O Straight Edge Gage and Standard (SE-1000) Gages 62, 147
Ovality Gage 147 Stator Bore Gages (SBG-5000 Series) 72, 140
Ovality Gage (MRP) 30, 58-59, 104 Stator Bore Shoes 75, 141
Stator Bore Standards 73, 74, 140-141
P Storage Cases 151
PD-3000 Series 150
PD-6000 Series & Replacement Parts 14, 114 T
PD-8000 Series 14, 114 Taper Gages 32, 50, 115
PD-8000-RSC Series 47, 113 Tapered Insert Identifiers 44,127
PG-6000 Series 12, 116 TDWIN 10-11, 128
Pin Nose Seal Diameter Gages 64-65, 144-145 TDWIN Taper 26, 42-43, 129
Pin Seal Diameter Gage Standoff Plates 145 TH-3000 Series 18, 34, 52, 122
Pit Depth Gages 150 Thread Data Chart 149
Pitch Diameter Gages, Rotary Shouldered Connections 47, 113 Thread Height Contact Points, Rotary Shouldered Conn. 53, 123
Pitch Diameter Gages, Straight Threads 14, 114 Thread Height Contact Points, Tubing and Casing 35, 123
Pitch Diameter Location Templates 46, 112 Thread Height Gages (External and Internal) 18, 34, 52, 122
Pitch Diameter Rod Standards for RSC gages 113 Thread Height Gage Standards 35, 53, 123
Pipe Straightness Gages 62-63, 147 Thread Height Gage Standards, Rotary Shouldered Conn. 53,123
PN-3000 Series 64-65, 144-145 Thread Height Gage Standards, Tubing and Casing 35,123
Power Section Gages (Stator, Rotor Maj./Min. Dia.) 72-77, 140-143 Thread Form Profile Gages 19, 27, 45, 126
Power Tight Make-up Gage 150 Thread Form Profile Overlays 127
Premium Connection Standards 67 Thread Form Profiles, Rotary Shouldered Connections 45, 126
PT-4000 150 Thread Form Profiles, Straight 19, 126
Thread Form Profiles, Tubing and Casing 27, 126
R Thread Rolls 13, 117
R & RX- Dog Bone Paddle Gage 138 Thread Rolls, MRP-5000 110
Repair Services 98-101 T-MIC 76-77, 142
RG-7000 Series 12, 116 Torque Shoulder Gages & Standards 61, 149
Rod Style Setting Standards for MRP Series 106-107 TS-1000 & TS-4000 61, 149
Rotor Major Diameter Gages 76-77, 142 Tubing & Casing Inspection Solutions 22-23
Rotor Minor Diameter Gages 76, 143
Rotor Saddle Gage 143 W
Rod Style Setting Standards for RSC gages 113 Wall Thickness Gage 151
R-RX-Groove Profile & Width GO/NO GO Gage 138 WT-9000 Series 151
Rotary Shouldered Connections Solutions 38-39
S
Saddle Gage 62, 147
SBG-5000A, SBG-5000D, SBG-5000E 72, 140 Gagemaker LP
SE-1000 62, 147
SG-8001 62, 147 P.O. Box 87709, Houston, Texas 77287-7709
Shoulder Location Gages 60-61, 148-149 712 East Southmore Ave., Pasadena, Texas 77502
Shop Floor Gage Setting and Part Measurement System 88-89, 132 Phone: 713-472-7360 • Fax: 713-472-7241
Smaller Diameter Thread Inspection Gages 118 Email: gagemaker@gagemaker.com or
SPG/SPA Pitch Diameter Contact Arms 119
SPG/SPA Pitch Diameter Contact Points 119 sales@gagemaker.com
Web: www.gagemaker.com
155
www.gagemaker.com

Gage Maker Catalog

Uploaded by

Copyright:

Available Formats

Gage Maker Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gage Maker Catalog

Uploaded by

Copyright:

Available Formats

Product Information

This catalog is an example of Gagemaker’s

We appreciate your business and hope you

The Gagemaker Team

Copyright © 2012 Gagemaker, LP

Straight Thread Inspection 4

4 TDWIN Software Functional Size Pitch Diameter

Thread Lead Thread Height Thread Form 5

Straight Thread Inspection System Solutions

For Additional Sizes and Pitches,

*Add-on Solution is for one specific form and pitch. Additional

Full solutions for specific form, size, and

6 TDWIN Software Functional Size Pitch Diameter

Thread Lead Thread Height Thread Form 7

Straight Thread Inspection System

8 TDWIN Software Functional Size Pitch Diameter

Thread Lead Thread Height Thread Form 9

Thread Inspection Setup and Tolerances

Thread types supported by the program include:

Thread Disk Software - Straight Thread Dimensions

Phone: 713-472-7360 • Fax: 713-472-7241 11

Thread Functional Size Inspection

Functional thread inspection gages, or GO/NO GO gages, measure

External Functional Size Gages (⅝” to 24” Diameters)

Model Description Range Resolution Travel

RG-7000 External Thread Roll Gage ⅝” - 4” (15.9 mm - 101.6 mm) .0005” ½”

RG-7001 External Thread Roll Gage 4” - 8” (101.6 mm - 203.2 mm) .0005” ½”

Internal Functional Size Gages (1½” to 24” Diameters)

Model Description Range Resolution Travel

UN Series (60° “V”) Thread Rolls

Acme and Stub Acme Thread Rolls

Phone: 713-472-7360 • Fax: 713-472-7241 13

Thread Pitch Diameter Inspection

External Pitch Diameter Gages (0” to 12” Diameters)

Model Description Range Resolution Travel

Internal Pitch Diameter Gages (1½” to 24” Diameters)

Model Description Range Resolution Travel

Acme or Stub Acme Threads

7° x 45° Buttress Series Contact Points

Phone: 713-472-7360 • Fax: 713-472-7241 15

Thread Lead Inspection

Higher resolution indicators are also available.

Model Description Minimum Bore Range

Lead Gage Setting Standards

Model Connection Type/Description Threads Per Inch (TPI)

Acme or Stub Acme Threads

7° x 45° Buttress Series Contact Points

Phone: 713-472-7360 • Fax: 713-472-7241 17

Thread Height Inspection

For inspecting your straight thread heights, Gagemaker

External Thread Height Gages

Model Description Travel Min. Bore

TH-3001V External Thread Height, 0-100 .196" 3.230"

Internal Thread Height Gages

Model Description Travel Min. Bore

TH-3010 Internal Thread Height, 0-100, 1” base .250" 1.750"

template into the threads. By shining a light behind the

Thread Form Profiles

TP-UNVE-__P External UN series thread gage

TP-GPA-__P Internal/external general purpose Acme thread profile gage