FTTX Solutions

Mini Fiber Distribution Hub 3000

CommScope’s FTTX infrastructure solutions are designed from the ground up Benefits
to meet the unique requirements of FTTX networks. Designed for operational
• Intelligent Design: Right-sized to meet
efficiency and scalability, CommScope’s FTTX solutions simplify network requirements for MDU and rural communities.
installation, maintenance and management from the central office/head Miniaturized cabinet takes less space on
end to the outside plant. poles and walls

• Flexible and Modular: Utilizes standardized

The Mini Fiber Distribution Hub (FDH) 3000 is specifically designed to address the unique density CommScope splitter modules and accessories
requirements commonly found in multi-dwelling units (MDUs) and in rural fiber deployments. The Mini FDH • Quality and Performance: Built with intuitive
3000 provides maximum density termination capacity of eight feeder fibers and 72 distribution fibers and cable routing schemes, easy connector
includes spliced or MPO connections for distribution and feeder ports. access, and bend radius protection
The Mini FDH 3000 provides quick and easy technician access to subscriber connections. The same Mini • The same Mini Fiber Distribution Hub unit can
Fiber Distribution Hub will serve both indoor and outdoor applications, and will accommodate wall or be used for cross-connect applications
pole mount installations.

1 For more information, visit commscope.com

FTTX Solutions
Mini Fiber Distribution Hub 3000

Features and Benefits

• Miniaturized cabinet takes up less space on poles
and walls

• Supports up to 72 fiber terminations

• The same Mini Fiber Distribution Hub will serve both

indoor and outdoor applications
Standard Length
• Universal wall/pole bracket shipped with unit PNP Splitter

• Accommodates up to 4 splitters

• Weather resistant metallic cabinet protects from dust,

moisture and UV

• Integrated splicing or MPO interface for F1 and F2 fibers

• Single front door access

• Swing frame access to splitter chassis and splice Access via Sliding
Adapter Pack
trays/MPO adapters

• Carefully designed fiber paths reduce attenuation and

signal loss

• Parking lot storage for 32 fibers

• Almond color

• Operating temperature: -40ºC to 65ºC (-40ºF to 150ºF)

• Access via sliding 6 adapter packs

• UL safety listed Familiar Swing Frame

and Routing

Parking Lot Storage

Technician-friendly Design Bottom Cable Entry Ports Universal Pole/Wall

Bracket Included

2 For more information, visit commscope.com

FTTX Solutions
Mini Fiber Distribution Hub 3000

Ordering Information

F1 Splice Feeder* - F2 Splice Distribution* Configurations

Distribution Fiber
Feeder Fiber Count Catalog Number
Count

8 12 FD3-AR012J00U00P8

8 24 FD3-AR024J00U00P8

8 36 FD3-AR036J00U00P8

8 48 FD3-AR048J00U00P8

8 60 FD3-AR060J00U00P8

8 72 FD3-AR072J00U00P8

F1 Splice Feeder* - F2 MPO Distribution Configurations

Distribution Fiber
Feeder Fiber Count Catalog Number
Count

8 36 FD3-AR036J00M00P8

8 48 FD3-AR048J00M00P8

8 72 FD3-AR072J00M00P8

F1 MPO Feeder** – F2 MPO Distribution Configurations

Distribution Fiber
Feeder Fiber Count Catalog Number
Count

8 36 FD3-AR036J00MM0P8

8 48 FD3-AR048J00MM0P8

8 72 FD3-AR072J00MM0P8

*Splice configurations use loose tube microcable pigtails for single fiber splicing. For mass
fusion splicing, the pigtails must be ribbonized. Trays provided are suitable for either single
fiber splicing or mass fusion splicing.

**Only fibers 1-8 are used in MPO feeder configuration.

3 For more information, visit commscope.com

FTTX Solutions
Mini Fiber Distribution Hub 3000

Specifications
Maximum Distribution Size: 72 Terminations

Maximum Feeder Fibers: 8

Distribution Splice Capacity: (6) 12 Fiber Trays

Distribution MPO Capacity: (6) 12 Fiber MPO

Feeder Splice Cabinet: (1) 12 Fiber Tray

Feeder MPO Capacity: ** (1) Fiber MPO

Cabinet Dimensions: 19H x 13W x 8D in. *

Splitter Capacity: 4

Parking Capacity: 32 Fibers

*With installed mounting bracket

Accessories
Ordering Information

Description Catalog Number

Cable Compression Fitting/Clamp Kit

Each kit contains a compression fitting, grommets, cable clamp & strength member tie-off bracket. Order this kit to replace a dome
plug with a compression fitting for cable sizes of .35 to .62 inches. Compression fittings are available for larger and smaller cable FD3-ACCRCBLCLMP
sizes.
216 Tools – Can Wrench Keys

Nickel-plated brass can wrench key

OSP-216BKEY1
For use in loosening/tightening security screws

Aluminum can wrench key

OSP-216BKEY2
For use in loosening/tightening security screws
Cleaning Kits and Touch Up Paint

Alcohol cleaning kit for connector end faces FPC-CLNKIT1

Almond touch up paint ACE-ACC-PTALMD

Door Replacement Kit

Includes door, tamper resistant 216B door keepers, gasket and labels FD3-ACCRDOORKT
Cross-Connect Jumper

2.0mm singlemode patch cord, 1.5 meters length, SC/APC connector FPCMW-APSC-P-1.5M

4 For more information, visit commscope.com

FTTX Solutions
Mini Fiber Distribution Hub 3000

Mini Plug and Play Splitter Modules

Ordering Information and Performance Specifications

Splitter Type Max Loss* Typical Loss* Uniformity Return Loss Directivity PDL Wavelength Range Catalog Number

1x2 3.8dB 3.1dB 1.1dB ≥55dB ≥55dB 0.2dB 1260-1360 nm and 1480 – 1580 nm FPS-MPP1WJJ

1x4 7.2dB 6.6dB 0.8dB ≥55dB ≥60dB 0.2dB 1260-1635 nm FPS-MPP1NJJ

1x8 10.3dB 9.7dB 1.0dB ≥55dB ≥60dB 0.2dB 1260-1635 nm FPS-MPP1JJJ

1x16 13.5dB 12.8dB 1.0dB ≥55dB ≥60dB 0.3dB 1260-1635 nm FPS-MPP1CJJ

1x32 16.7dB 16.0dB 1.3dB ≥55dB ≥60dB 0.3dB 1260-1635 nm FPS-MPP1AJJ

*Includes Polarization Dependent Loss (PDL).

www.commscope.com
Visit our website or contact your local CommScope representative for more information.

© 2015 CommScope, Inc. All rights reserved.

All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.
This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services.
PS-109979.1-AE (12/15)