Product Information Packet

EHM2523T
15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
 Product Information Packet: EHM2523T - 15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1

Part Detail
Revision: A Status: PRD/A Change #: Proprietary: No

Type: AC Elec. Spec: 39WGY375 CD Diagram: CD0180 Mfg Plant:

Mech. Spec: 39R006 Layout: 39LYR006 Poles: 04 Created Date: 10-02-2017

Base: RG Eff. Date: 04-26-2018 Leads: 9#10

Specs

Catalog Number: EHM2523T Insulation Class: F

Enclosure: OPSB Inverter Code: Inverter Ready

Frame: 254T KVA Code: G

Frame Material: Steel Lifting Lugs: Standard Lifting Lugs

Output @ Frequency: 15.000 HP @ 60 HZ Locked Bearing Indicator: No Locked Bearing

Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ Motor Lead Quantity/Wire Size: 9 @ 10 AWG

Voltage @ Frequency: 460.0 V @ 60 HZ Motor Lead Exit: Ko Box

230.0 V @ 60 HZ Motor Lead Termination: Flying Leads

XP Class and Group: None Motor Type: 3948M

XP Division: Not Applicable Mounting Arrangement: F1

Agency Approvals: CSA Power Factor: 85

UR Product Family: General Purpose

Auxillary Box: No Auxillary Box Pulley End Bearing Type: Ball

Auxillary Box Lead Termination: None Pulley Face Code: Standard

Base Indicator: Rigid Pulley Shaft Indicator: Standard

Bearing Grease Type: Polyrex EM (-20F +300F) Rodent Screen: None

Blower: None Shaft Extension Location: Pulley End

Current @ Voltage: 18.000 A @ 460.0 V Shaft Ground Indicator: No Shaft Grounding

Page 2 of 8
 Product Information Packet: EHM2523T - 15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1

36.000 A @ 230.0 V Shaft Rotation: Reversible

38.000 A @ 208.0 V Shaft Slinger Indicator: No Slinger

Design Code: A Speed Code: Single Speed

Drip Cover: No Drip Cover Motor Standards: NEMA

Duty Rating: CONT Starting Method: Direct on line

Electrically Isolated Bearing: Not Electrically Isolated Thermal Device - Bearing: NONE (OLD)

Feedback Device: NO FEEDBACK Thermal Device - Winding: None

Front Face Code: Standard Vibration Sensor Indicator: No Vibration Sensor

Front Shaft Indicator: None Winding Thermal 1: None

Heater Indicator: No Heater Winding Thermal 2: None

Page 3 of 8
 Product Information Packet: EHM2523T - 15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1

Nameplate NP2094E06B03

CAT.NO. EHM2523T
SPEC. 39R006Y375G1
HP 15
VOLTS 230/460
AMPS 36/18
RPM 1765
FRAME 254T HZ 60 PH 3
SER.F. 1.15 CODE G DES A CL F
NEMA-NOM-EFF 93 PF 85
RATING 40C AMB-CONT
CC 010A USABLE AT 208V 38
DE 6309 ODE 6208
AUTO MANUAL NONE
ENCL OPSB SN
BLANK

Page 4 of 8
 Product Information Packet: EHM2523T - 15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1

AC Induction Motor Performance Data

Record # 66605 - Typical performance - not guaranteed values

Winding: 39WGY375-R001 Type: 3948M Enclosure: OPSB

460 V, 60 Hz:
Nameplate Data
High Voltage Connection
Rated Output (HP) 15 Full Load Torque 44.53 LB-FT
Volts 230/460 Start Configuration direct on line
Full Load Amps 36/18 Breakdown Torque 141 LB-FT
R.P.M. 1765 Pull-up Torque 60.4 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 77.2 LB-FT
NEMA Design Code A KVA Code G Starting Current 117 A
Service Factor (S.F.) 1.15 No-load Current 6.37 A
NEMA Nom. Eff. 93 Power Factor 85 Line­line Res. @ 25ºC 0.62591 Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 26°C
S.F. Amps Temp. Rise @ S.F. Load 32°C
Locked-rotor Power Factor 32.8

Load Characteristics 460 V, 60 Hz, 15 HP

% of Rated Load 25 50 75 100 125 150 S.F.
Power Factor 51 73 81 85 87 87 86
Efficiency 89.9 93.1 93.5 93 92.3 91.2 92.6
Speed 1792 1784.7 1776.9 1768 1759.3 1748.7 1763
Line amperes 7.67 10.4 13.8 17.7 21.8 26.5 20.2

Page 5 of 8
 Product Information Packet: EHM2523T - 15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1

Performance Graph at 460V, 60Hz, 15.0HP Typical performance - Not guaranteed values

Page 6 of 8
Product Information Packet: EHM2523T - 15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1

Page 7 of 8
Product Information Packet: EHM2523T - 15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1

Page 8 of 8