Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
382 views

API 1104 Reading Checklist

This document provides guidelines and requirements for welding pipelines and related facilities. It covers topics such as qualifying welding procedures, qualifying welders, designing and preparing joints for welding, performing production welding, inspecting and testing welds, accepting welds, repairing defects, and nondestructive testing procedures. The document contains two appendices that provide additional acceptance standards for girth welds and guidelines for in-service welding.

Uploaded by

bacabacabaca
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
382 views

API 1104 Reading Checklist

This document provides guidelines and requirements for welding pipelines and related facilities. It covers topics such as qualifying welding procedures, qualifying welders, designing and preparing joints for welding, performing production welding, inspecting and testing welds, accepting welds, repairing defects, and nondestructive testing procedures. The document contains two appendices that provide additional acceptance standards for girth welds and guidelines for in-service welding.

Uploaded by

bacabacabaca
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

API 1104

WELDING OF PIPELINES AND RELATED FACILITIES


READING CHECKLISTS

 1 GENERAL  7.2 Alignment


 1.1 Scope  7.3 Use of Lineup Clamp for Butt-welds
 7.4 Bevel
 2 REFERENCE PUBLICATIONS  7.5 Weather Conditions
 7.6 Clearance
 3 DEFINITION OF TERMS  7.7 Cleaning Between Beads
 3.1 General  7.8 Position Welding
 3.2 Definitions  7.9 Roll Welding
 7.10 Identification of Welds
 4 SPECIFICATIONS  7.11 Pre-and Post-Heat Treatment
 4.1 Equipment
 4.2 Materials  8 INSPECTION AND TESTING OF PRODUCTION
WELDS
 5 QUALIFICATION OF WELDING PROCEDURES  8.1 Rights of Inspection
FOR WELDS CONTAINING FILLER-METAL  8.2 Methods of Inspection
ADDITIVES  8.3 Qualification of Inspection Personnel
 5.1 Procedure Qualification  8.4 Certification of Nondestructive Testing
 5.2 Record Personnel
 5.3 Procedure Specification
 5.4 Essential Variables  9 ACCEPTANCE STANDARDS FOR
 5.5 Welding of Test Joints-Butt Welds NONDESTRUCTIVE TESTING
 5.6 Testing of Welded Joints-Butt Welds  9.1 General
 5.7 Welding of Test Joints-Fillet Welds  9.2 Rights of Rejection
 5.8 Testing of Welded Joints-Fillet Welds  9.3 Radiographic Testing
 9.4 Magnetic Particle Testing
 6 QUALIFICATION OF WELDERS  9.5 Liquid Penetrant Testing
 6.1 General  9.6 Ultrasonic Testing
 6.2 Single Qualification  9.7 Visual Acceptance Standards for
 6.3 Multiple Qualification Undercutting
 6.4 Visual Examination
 6.5 Destructive Testing  10 REPAIR AND REMOVAL OF DEFECTS
 6.6 Radiography Butt-welds Only  10.1 Authorization for Repair
 6.7 Retesting.  10.2 Repair Procedure
 6.8 Records  10.3 Acceptance Criteria
 10.4 Supervision
 7 DESIGN AND PREPARATION OF A JOINT FOR  10.5 Welder
PRODUCTION WELDING
 7.1 General

1 of 2
 11 PROCEDURES FOR NONDESTRUCTIVE
TESTING  APPENDIX A ALTERNATIVE ACCEPTANCE
 11.1 Radiographic Test Methods STANDARDS FOR GIRTH WELDS
 11.2 Magnetic Particle Test Method  A.1 General
 11.3 Liquid Penetrant Test Method  A.2 Additional Requirements for Stress
 11.4 Ultrasonic Test Methods Analysis
 A.3 Welding Procedure
 12 MECHANIZED WELDING WITH FILLER  A.4 Qualification of Welders
METAL ADDITIONS  A.5 Inspection and Acceptable Limits
 12.1Acceptable Processes  A.6 Record
 12.2 Procedure Qualification  A.7 Example
 12.3 Record  A.8 Repairs
 12.4 Procedure Specification  A.9 Nomenclature
 12.5 Essential Variables
 12.6 Qualification of Welding Equipment  APPENDIX B IN-SERVICE WELDING
and Operators  B.1 General
 12.7 Records of Qualified Operators  B.2 Qualification of In-service Welding
 12.8 Inspection and Testing of Production Procedures
Welds  B.3 In-service Welder Qualification
 12.9 Acceptance Standards for  B.4 Suggested In-service Welding Practices
Nondestructive Testing  B.5 Inspection and Testing of In-service
 12.10 Repair and Removal of Defects Welds
 12.11 Radiographic Testing  B.6 Standards of Acceptability:
Nondestructive Testing (Including
 13 AUTOMATIC WELDING WITHOUT FILLER- Visual)
METAL ADDITIONS  B.7 Repair and Removal of Defects
 13.1 Acceptable Processes
 13.2 Procedure Qualification
 13.3 Record
 13.4 Procedure Specification
 13.5 Essential Variables
 13.6 Qualification of Equipment and
Operators
 13.7 Records of Qualified Operators
 13.8 Quality Assurance of Production
Welds
 13.9 Acceptance Standards for
Nondestructive Testing
 13.10 Repair and Removal of Defects
 13.11 Radiographic Procedure

2 of 2

You might also like