Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
668 views

API 510 Reading Checklist

READING CHECKLISTS FOR EXAM PREPARATION API 510 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION

Uploaded by

bacabacabaca
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
668 views

API 510 Reading Checklist

READING CHECKLISTS FOR EXAM PREPARATION API 510 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION

Uploaded by

bacabacabaca
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

API 510

PRESSURE VESSEL INSPECTION CODE:


IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
READING CHECKLISTS

 1 Scope  5.12 Inspection of Shell and Tube Heat


 1.1 General Application Exchangers
 1.2 Specific Application
 1.3 Recognized Technical Concepts  6 Interval/Frequency and Extent of Inspection
 6.1 General
 2 Normative References  6.2 Inspection During Installation and
Service Changes
 3 Terms, Definitions, Acronyms, and  6.3 RBI
Abbreviations  6.4 External Inspection
 3.1 Terms and Definitions  6.5 Internal, On-stream, and Thickness
 3.2 Acronyms and Abbreviations Measurement Inspections
 6.6 Pressure-relieving Devices
 4 Owner/User Inspections Organization  6.7 Deferral of Inspection Due Dates
 4.1 Owner/User Organization  6.8 Deferral of Inspection Repair
Responsibilities Recommendation Due Date
 4.2 Engineer  6.9 Review of Inspection Repair
 4.3 Repair Organization Recommendations
 4.4 Inspector
 4.5 Examiners  7 Inspection Data Evaluation, Analysis, and
 4.6 Other Personnel Recording
 4.7 Inspection Organization Audits  7.1 Corrosion Rate Determination
 7.2 Remaining Life Calculations
 5 Inspection, Examination, and Pressure  7.3 Maximum Allowable Working Pressure
Testing Practices (MAWP) Determination
 5.1 Inspection Plans  7.4 FFS Analysis of Corroded Regions
 5.2 Risk-Based Inspection (RBI)  7.5 FFS Evaluations
 5.3 Preparation for Inspection  7.6 Required Thickness Determination
 5.4 Inspection for Different Types of 7.7 Evaluation of Existing Equipment with
Damage Mechanisms and Failure Minimal Documentations
Modes  7.8 Reports and Records
 5.6 Condition Monitoring Locations (CMLs)
 5.7 Condition Monitoring Methods  8 Repairs, Alterations, and Rerating of
 5.8 Pressure Testing Pressure Vessels and Pressure-relieving
 5.9 Material Verification and Traceability Devices
 5.10 Inspection of In-service Welds  8.1 Repairs and Alterations
 5.11 Inspection and Repair of Flanged  8.2 Rerating
Joints

1 of 2
 9 Alternative Rules for E&P Pressure Vessels
 9.1 Scope and Specific Exemptions
 9.2 Definitions
 9.3 Inspection Program
 9.4 Pressure Test
 9.5 Safety Relief Devices
9.6 Records

 Annex A Code Exemptions


 Annex B Inspector Certification
 Annex C Sample Pressure Vessel Inspection
Record
 Annex D Sample Repair, Alteration, or
Rerating of Pressure Vessel Form
 Annex E Technical Inquiries

2 of 2

You might also like