Model 086D50

Large-sledge Impulse Hammer w/force sensor & tips, 0 to 5k lbf, 1 mV/lbf

Installation and Operating Manual

For assistance with the operation of this product,

contact PCB Piezotronics, Inc.

Toll-free: 800-828-8840
24-hour SensorLine: 716-684-0001
Fax: 716-684-0987
E-mail: info@pcb.com
Web: www.pcb.com
 Service, Repair, and Return
Policies and Instructions

The information contained in this document supersedes all similar information that
may be found elsewhere in this manual.

also good practice to recalibrate after

Service – Due to the sophisticated exposure to any severe temperature
nature of the sensors and associated extreme, shock, load, or other
instrumentation provided by PCB environmental influence, or prior to any
Piezotronics, user servicing or repair is critical test.
not recommended and, if attempted,
may void the factory warranty. Routine PCB Piezotronics maintains an ISO-
maintenance, such as the cleaning of 9001 certified metrology laboratory and
electrical connectors, housings, and offers calibration services, which are
mounting surfaces with solutions and accredited by A2LA to ISO/IEC 17025,
techniques that will not harm the with full traceability to SI through
physical material of construction, is N.I.S.T. In addition to the normally
acceptable. Caution should be observed supplied calibration, special testing is
to ensure that liquids are not permitted also available, such as: sensitivity at
to migrate into devices that are not elevated or cryogenic temperatures,
hermetically sealed. Such devices phase response, extended high or low
should only be wiped with a dampened frequency response, extended range,
cloth and never submerged or have leak testing, hydrostatic pressure
liquids poured upon them. testing, and others. For information on
standard recalibration services or
Repair – In the event that equipment special testing, contact your local PCB
becomes damaged or ceases to Piezotronics distributor, sales
operate, arrangements should be made representative, or factory customer
to return the equipment to PCB service representative.
Piezotronics for repair. User servicing or
repair is not recommended and, if Returning Equipment – Following
attempted, may void the factory these procedures will ensure that your
warranty. returned materials are handled in the
most expedient manner. Before
Calibration – Routine calibration of returning any equipment to PCB
sensors and associated instrumentation Piezotronics, contact your local
is recommended as this helps build distributor, sales representative, or
confidence in measurement accuracy factory customer service representative
and acquired data. Equipment to obtain a Return Warranty, Service,
calibration cycles are typically Repair, and Return Policies and
established by the users own quality Instructions Materials Authorization
regimen. When in doubt about a (RMA) Number. This RMA number
calibration cycle, a good “rule of thumb” should be clearly marked on the outside
is to recalibrate on an annual basis. It is of all package(s) and on the packing
list(s) accompanying the shipment. A complete list of distributors and offices
detailed account of the nature of the can be found at www.pcb.com.
problem(s) being experienced with the Customers within the United States may
equipment should also be included contact their local sales representative
inside the package(s) containing any or a factory customer service
returned materials. representative. A complete list of sales
representatives can be found at
A Purchase Order, included with the www.pcb.com. Toll-free telephone
returned materials, will expedite the numbers for a factory customer service
turn-around of serviced equipment. It is representative, in the division
recommended to include authorization responsible for this product, can be
on the Purchase Order for PCB to found on the title page at the front of this
proceed with any repairs, as long as manual. Our ship to address and
they do not exceed 50% of the general contact numbers are:
replacement cost of the returned
item(s). PCB will provide a price PCB Piezotronics, Inc.
quotation or replacement 3425 Walden Ave.
recommendation for any item whose Depew, NY14043 USA
repair costs would exceed 50% of Toll-free: (800) 828-8840
replacement cost, or any item that is not 24-hour SensorLineSM: (716) 684-0001
economically feasible to repair. For Website: www.pcb.com
routine calibration services, the E-mail: info@pcb.com
Purchase Order should include
authorization to proceed and return at
current pricing, which can be obtained
from a factory customer service
representative.

Contact Information – International

customers should direct all inquiries to
their local distributor or sales office. A
 PCB工业监视和测量设备 - 中国RoHS2公布表
PCB Industrial Monitoring and Measuring Equipment - China RoHS 2 Disclosure Table
有害物质
汞 镉
部件名称 铅 (Pb) (Hg) (Cd) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE)
住房 O O O O O O
PCB板 X O O O O O
电气连接器 O O O O O O
压电晶体 X O O O O O
环氧 O O O O O O
铁氟龙 O O O O O O
电子 O O O O O O
厚膜基板 O O X O O O
电线 O O O O O O
电缆 X O O O O O
塑料 O O O O O O
焊接 X O O O O O
铜合金/黄铜 X O O O O O
本表格依据 SJ/T 11364 的规定编制。
O： 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X： 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
铅是欧洲RoHS指令2011/65/ EU附件三和附件四目前由于允许的豁免。

CHINA RoHS COMPLIANCE

Component Name Hazardous Substances
Lead Mercury Cadmium Chromium VI Polybrominated Polybrominated
(Pb) (Hg) (Cd) Compounds Biphenyls Diphenyl
(Cr(VI)) (PBB) Ethers (PBDE)
Housing O O O O O O
PCB Board X O O O O O
Electrical O O O O O O
Connectors
Piezoelectric X O O O O O
Crystals
Epoxy O O O O O O
Teflon O O O O O O
Electronics O O O O O O
Thick Film O O X O O O
Substrate
Wires O O O O O O
Cables X O O O O O
Plastic O O O O O O
Solder X O O O O O
Copper Alloy/Brass X O O O O O
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit
requirement of GB/T 26572.
X: Indicates that said hazardous substance contained in at least one of the homogeneous materials for this part is above
the limit requirement of GB/T 26572.
Lead is present due to allowed exemption in Annex III or Annex IV of the European RoHS Directive 2011/65/EU.

DOCUMENT NUMBER: 21354

DOCUMENT REVISION: D
ECN: 46162
 Model Number Revision: H
086D50 ICP® IMPACT HAMMER ECN #: 46036

Performance ENGLISH SI OPTIONAL VERSIONS

Sensitivity(± 15 %) 1 mV/lbf 0.23 mV/N Optional versions have identical specifications and accessories as listed for the standard model
Measurement Range ± 5000 lbf pk ± 22,240 N pk except where noted below. More than one option may be used.
Resonant Frequency ≥ 5 kHz ≥ 5 kHz
Non-Linearity ≤1% ≤1% TLD - TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
Electrical Output Bias Voltage 8.5 to 15 VDC 8.5 to 15 VDC
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <100 Ohm <100 Ohm [1]
NOTES:
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
[1] Typical.
Discharge Time Constant ≥ 2000 sec ≥ 2000 sec [1]
[2] See PCB Declaration of Conformance PS136 for details.
Physical
Sensing Element Quartz Quartz
Sealing Hermetic Hermetic
Hammer Mass 12.1 lb 5.5 kg
Head Diameter 3.0 in 7.6 cm SUPPLIED ACCESSORIES:
Model 084A31 Tip - soft plastic, brown (1)
Tip Diameter 3.0 in 7.6 cm
Model 084A32 Tip - hard plastic, red (1)
Hammer Length 35 in 89 cm Model HCS-2 Calibration of Series 086 instrumented impact hammers (1)
Electrical Connection Position Bottom of Handle Bottom of Handle
Electrical Connector BNC Jack BNC Jack
Entered: LK Engineer: BAM Sales: WDC Approved: BAM Spec Number:

Date: 10/11/2016 Date: 10/11/2016 Date: 10/11/2016 Date: 10/11/2016 12993

[2]
All specifications are at room temperature unless otherwise specified.
Phone: 716-684-0001
In the interest of constant product improvement, we reserve the right to change specifications without notice.
Fax: 716-684-0987
ICP® is a registered trademark of PCB Group, Inc. 3425 Walden Avenue, Depew, NY 14043 E-Mail: info@pcb.com