2SA2030 / 2SA2018 / 2SA2119K

PNP -500mA -12V Low Frequency Amplifier Transistors Datasheet

lOutline
Parameter Value VMT3 EMT3
Collector
VCEO -12V Collector
Base Base
IC -500mA Emitter Emitter

2SA2030 2SA2018
lFeatures (SC-105AA) SOT-416 (SC-75A)
1) A Collecotr current is large.General Purpose. SMT3
Collector
2) Collector saturation voltage is low.
Base
VCE(sat)  250mV
At IC= -200mA, IB= -10mA Emitter

3) Complementary NPN Types : 2SA2119K

2SC5663 (VMT3) / 2SC5585 (EMT3) SOT-346 (SC-59)
4) Lead Free/RoHS Compliant.

lInner circuit
Collector
lApplications
Base Switching circuit, Muting circuit

Emitter

lPackaging specifications
Package Basic
Taping Reel size Tape width
Part No. Package size ordering Marking
code (mm) (mm)
(mm) unit (pcs)
2SA2030 VMT3 1212 T2L 180 8 8,000 BW
2SA2018 EMT3 1616 TL 180 8 3,000 BW
2SA2119K SMT3 2928 T146 180 8 3,000 BW

www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved. 1/8 2013.05 - Rev.D
2SA2030 / 2SA2018 / 2SA2119K Data Sheet

lAbsolute maximum ratings (Ta = 25°C)

Parameter Symbol Values Unit
Collector-base voltage VCBO -15 V
Collector-emitter voltage VCEO -12 V
Emitter-base voltage VEBO -6 V
IC -500 mA
Collector current
ICP *1
-1 A

2SA2030
150 mW
Power dissipation 2SA2018 PD *2
2SA2119K 200 mW
Junction temperature Tj 150 °C
Range of storage temperature Tstg -55 to +150 °C

lElectrical characteristics(Ta = 25C)

Parameter Symbol Conditions Min. Typ. Max. Unit
Collector-emitter
BVCEO IC = -1mA -12 - - V
breakdown voltage
Collector-base
BVCBO IC = -10mA -15 - - V
breakdown voltage
Emitter-base
BVEBO IE = -10mA -6 - - V
breakdown voltage

Collector cut-off current ICBO VCB = -15V - - -100 nA

Emitter cut-off current IEBO VEB = -6V - - -100 nA

Collector-emitter
VCE(sat) IC = -200mA, IB = -10mA - -100 -250 V
saturation voltage

DC current gain hFE VCE = -2V, IC = -10mA 270 - 680 -

VCE = -2V, IE = 10mA

Transition frequency fT - 260 - MHz
f=100MHZ
VCB = -10V, IE = 0mA
Output capacitance Cob - 6.5 - pF
f = 1MHz
*1 PW=10ms Single Pulse
*2 Each terminal mounted on a reference footprint

www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved. 2/8 2013.05 - Rev.D
2SA2030 / 2SA2018 / 2SA2119K Data Sheet

lElectrical characteristic curves(Ta = 25°C)

Fig.1 Ground Emitter Propagation Characteristics Fig.2 Typical Output Characteristics

COLLECTOR CURRENT : IC [mA]

COLLECTOR CURRENT : IC [mA]

BASE TO EMITTER VOLTAGE : VBE [V] COLECTOR TO EMITTE VOLTAGE : VCE [V]

Fig.3 DC Current Gain vs. Collector Current(I) Fig.4 DC Current Gain vs. Collector Current(II)

1000
1000

500

200 VCE= -5V

DC CURRENT GAIN : hFE

DC CURRENT GAIN : hFE

-2V
100
100
-1V
50

20

10
10
5

2
Ta=25ºC
11
-1 -2 -5 -10 -20 -50 -100 -200 -500-1000

COLLECTOR CURRENT : IC [mA] COLLECTOR CURRENT : IC [mA]

www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved. 3/8 2013.05 - Rev.D
2SA2030 / 2SA2018 / 2SA2119K Data Sheet

lElectrical characteristic curves(Ta = 25°C)

Fig.5 Collector-Emitter Saturation Voltage Fig.6 Collector-Emitter Saturation Voltage

vs. Collector Current (I) vs. Collector Current (II)
SATURATION VOLTAGE : VCE(sat) [mV]

SATURATION VOLTAGE : VCE(sat) [mV]

COLLECTOR-EMITTER

COLLECTOR-EMITTER

COLLECTOR CURRENT : IC [mA] COLLECTOR CURRENT : IC [mA]

Fig.7 Base-Emitter Saturation Voltage Fig.8 Gain Bandwidth Product

vs. Collector Current vs. Emitter Current
TRANSITION FREQUENCY : fT [MHz]
SATURATION VOLTAGE : VBE(sat) [mV]
BASE-EMITTER m

COLLECTOR CURRENT : IC [mA] EMITTER CURRENT :IE [mA]

www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved. 4/8 2013.05 - Rev.D
2SA2030 / 2SA2018 / 2SA2119K Data Sheet

lElectrical characteristic curves(Ta = 25°C)

Fig.9 Emitter input capacitance vs.

Emitter-Base Voltage
Collector output capacitance vs. Fig.10 Safe Operating Area
Collector-Base Voltage
-10
COLLECTOR OUTPUT CAPACITANCE : Cob [pF]

2SA2030
1ms

COLLECTOR CURRENT : IC [A]

10ms
EMITTER INPUT CAPACITANCE : Cib [pF]

-1

-0.1 100ms

DC
(Mounted on a
-0.01 reference land)

Ta=25ºC
Single non repetitive pulse
-0.001
-0.01 -0.1 -1 -10 -100

COLLECTOR - BASE VOLTAGE : VCB [V]

COLLECTOR TO EMITTER VOLTAGE : VCE[ V]
EMITTER - BASE VOLTAGE : VEB [V]

Fig.11 Safe Operating Area Fig.12 Safe Operating Area

-10 -10
2SA2018 1ms 2SA2119K
1ms
COLLECTOR CURRENT : IC [A]

COLLECTOR CURRENT : IC [A]

10ms
-1 -1 10ms

-0.1 -0.1
100ms
100ms
DC
DC (Mounted on a
-0.01 (Mounted on a -0.01 reference land)
reference land)
Ta=25ºC Ta=25ºC
Single non repetitive pulse Single non repetitive pulse
-0.001 -0.001
-0.01 -0.1 -1 -10 -100 -0.01 -0.1 -1 -10 -100

COLLECTOR TO EMITTER VOLTAGE : VCE [V] COLLECTOR TO EMITTER VOLTAGE : VCE [V]

www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved. 5/8 2013.05 - Rev.D
2SA2030 / 2SA2018 / 2SA2119K Data Sheet

lDimensions (Unit : mm)

D
A c
VMT3
b1

Lp
HE
E

e b
x S A

b3

l1

e1
A

l1
A1

S
b2 e

Pattern of terminal position areas

[Not a recommended pattern of soldering pads]

MILIMETERS INCHES
DIM
MIN MAX MIN MAX
A 0.45 0.55 0.018 0.022
A1 0.00 0.10 0.000 0.004
b 0.17 0.27 0.007 0.011
b1 0.27 0.37 0.011 0.015
c 0.08 0.18 0.003 0.007
D 1.10 1.30 0.043 0.051
E 0.70 0.90 0.028 0.035
e 0.40 0.02
HE 1.10 1.30 0.043 0.051
L 0.10 0.30 0.004 0.012
Lp 0.20 0.40 0.008 0.016
x - 0.10 - 0.004

MILIMETERS INCHES
DIM
MIN MAX MIN MAX
b2 - 0.37 - 0.015
b3 - 0.47 - 0.019
e1 0.80 0.031
l1 - 0.50 - 0.020
Dimension in mm / inches

www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved. 6/8 2013.05 - Rev.D
2SA2030 / 2SA2018 / 2SA2119K Data Sheet

lDimensions (Unit : mm)

D
A
EMT3 b1 c
Q

HE
E

L1

Lp
e b A3
x S A
b3

l1

e1
A

l1
A1

S
e
b2
Pattern of terminal position areas
[Not a recommended pattern of soldering pads]

MILIMETERS INCHES
DIM
MIN MAX MIN MAX
A 0.60 0.80 0.024 0.031
A1 0.00 0.10 0.000 0.004
A3 0.25 0.010
b 0.15 0.30 0.006 0.012
b1 0.25 0.40 0.010 0.016
c 0.10 0.20 0.004 0.008
D 1.50 1.70 0.059 0.067
E 0.70 0.90 0.028 0.035
e 0.50 0.020
HE 1.40 1.80 0.055 0.071
L1 0.10 - 0.004 -
Lp 0.15 - 0.006 -
Q 0.05 0.25 0.002 0.010
x - 0.10 - 0.004

MILIMETERS INCHES
DIM
MIN MAX MIN MAX
b2 - 0.40 - 0.016
b3 - 0.50 - 0.020
e1 1.10 0.043
l1 - 0.70 - 0.028
Dimension in mm / inches

www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved. 7/8 2013.05 - Rev.D
2SA2030 / 2SA2018 / 2SA2119K Data Sheet

lDimensions (Unit : mm)

D
A
SMT3
c
Q

HE
E

Lp
L1
A3
e b
x S A
e

e1
A

l1
A1

S
b2

Pattern of terminal position areas

[Not a recommended pattern of soldering pads]

MILIMETERS INCHES
DIM
MIN MAX MIN MAX
A 1.00 1.30 0.039 0.051
A1 0.00 0.10 0.000 0.004
A3 0.25 0.010
b 0.35 0.50 0.014 0.020
c 0.09 0.25 0.004 0.010
D 2.80 3.00 0.110 0.118
E 1.50 1.80 0.059 0.071
e 0.95 0.037
HE 2.60 3.00 0.102 0.118
L1 0.30 0.60 0.012 0.024
Lp 0.40 0.70 0.016 0.028
Q 0.20 0.30 0.008 0.012
x - 0.10 - 0.004
y - 0.10 - 0.004

MILIMETERS INCHES
DIM
MIN MAX MIN MAX
b2 - 0.60 - 0.024
e1 2.10 0.083
l1 - 0.90 - 0.035
Dimension in mm / inches

www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved. 8/8 2013.05 - Rev.D
 Notice

Notes
1) The information contained herein is subject to change without notice.

2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions :

3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.

4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.

5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.

6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.

7) The Products specified in this document are not designed to be radiation tolerant.

8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.

9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.

10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.

11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.

12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.

13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.

14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.

Thank you for your accessing to ROHM product informations.

More detail product informations and catalogs are available, please contact us.

ROHM Customer Support System

http://www.rohm.com/contact/

www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
R1102A