Professional Documents
Culture Documents
1e V11 Atjs 00001
1e V11 Atjs 00001
B 10-JANUARY‐2019 APPROVAL
A 14-NOVEMBER‐2018 APPROVAL
Project
Cairo West Supercritical Power Station
1x650 MW
Owner
Cairo Electricity Production Company (CEPC)
Supplier
VEOLIA
Document Description
Sealant
PGESCo. Document No.:
10089‐1E‐V11‐ATJS‐00001
Reference Item
Specification No. 99999-9-3SS-ATJS-00001
Design By MW
Supplier Document No.: Rev. Page 1
Checked By AA
Approved By AK
Date 15-JUNE‐2019
Cairo west Supercritical Power
Project Station 1 x 650 MW Steam Power
Station
Technical Specifications
9999-9-3SS-ATJS-00001
Manufacture BASF
REV C
Model MasterSeal 122
Country of Origin EGYPT
Applied for the sealing of joints of
Application non-fire rated areas
(Chlorination building, Condensate Polisher Building, Water
Treatment Building, Potable Water Cylinders Room)
For more technical details please refer to the attached data
sheets
Cairo West Supercritical Power Station
1x650 MW
PROJECT N°: E16323
Document Title: Sealant
COMMENT REPLY
COMMENT REPLY
ADVANTAGES
APPLICATION
Durable resilient seal
Preparation:
Non-staining
To ensure excellent adhesion the joint profile
Primer-free (except M1 smooth mortar) including the arises should be clean, sound, dry
Demonstrates good resistance to dilute acids and free from any loosely adherent material
and alkalis which could prevent adequate bond to the
Different colours available substrate.
COLOURS Application:
MasterSeal NP 472 is available in: MasterSeal NP 472 shall be applied using a
Concrete Grey (RAL 7004), Off White (RAL conventional sealant application gun, ensuring
1015) and White (RAL 9010) enough sealant is applied to facilitate the correct
width to depth ratio for the joint. Following the
application the sealant must be tooled into place
STANDARDS to ensure adequate adhesion with the joint
Conforms to ISO 11600 Class F25LM on profile is achieved. Finally tool to a neat finish
anodized aluminum and mortar. using a solution of soap and water onto a gloved
Conforms to ASTM C920 Type S, Grade NS, finger or tooling stick.
Class 25, Use T1, NT, A and M
Conforms to DIN 18540
MasterSeal® NP 472
BASF_CC-UAE/Sl_472_11_05/v7/05_17
The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF either
NOTE orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since they, and not
BASF, are responsible for carrying out procedures appropriate to a specific application.
BASF Construction Chemicals UAE LLC Disclaimer: the LRQA mark relates
P.O. Box 37127, Dubai, UAE to certified management system and
Tel: +971 4 8090800, Fax: +971 4 8851002 not to the product mentioned on this
www.master-builders-solutions.basf.ae datasheet
Spec_Cl_MSeal_NP_472_06/17
Specification Clause
MasterSeal® NP 472
Description
MasterSeal NP 472 is a high performance one component, moisture curing, polyurethane construction
sealant. In properly designed and constructed joints the product has been formulated to offer a non - slump
elastomeric seal, which exhibits good skin formation time and a fast cure.
Where indicated on the contract documents the elastomeric joint sealant shall be MasterSeal NP 472
manufactured by BASF Construction Chemicals UAE LLC.
Standards
BS EN ISO 11600 Class F25LM on anodized aluminum and mortar.
ASTM C920 Type S, Grade NS, Class 25, use T1, NT, A and M.
Conforms to DIN 18540
The product shall be manufactured by a company certified to confirm to the requirements of the
quality, environmental and occupational health & safety standards of ISO 9001, ISO 14001 and
OHSAS 18001
The technical information and application advice given in this BASF publication are based on the present
state of our best scientific and practical knowledge. As the information herein is of a general nature, no
assumption can be made as to a product's suitability for a particular use or application and no warranty as to
its accuracy, reliability or completeness either expressed or implied is given other than those required by law.
The user is responsible for checking the suitability of products for their intended use.
For additional information please consult the product Technical Data Sheet.
BASF Construction Chemicals UAE LLC can provide a full project specification and method statement on
request.
BASF Construction Chemicals UAE LLC P.O. Box 37127, Dubai, UAE
Tel: +971 4 8090800 Fax: +971 4 8851002 www.master-builders-solutions.basf.ae
REV C
MasterSeal® 122
Multi-purpose, premium quality, silicone sealant
DESCRIPTION COLOURS
MasterSeal 122 is a versatile, neutral cure MasterSeal 122 is available in:
silicone sealant, having exceptional bond to most Clear, White (RAL 9010), Light Grey (RAL 7035),
surfaces without primer. It is virtually odorless Concrete Grey (RAL 7040), Light Ivory (RAL
during cure. It is non-slump, with excellent 1015), Black, Mahogany Brown (RAL 8016) and
resistance against UV, weather and water, which Bronze (RAL 1036)
can be used in vertical and horizontal joints, in Note: The colours mentioned are closest match
internal and external environments, to provide a to the RAL Nos.
long-term, durable, elastic seal.
WATCHPOINTS
TYPICAL USES Not suitable for PE, PP, PC, PMMA, PTFE,
MasterSeal 122 has been developed to form a Neoprene, and bituminous substrates
durable elastic seal for vertical and horizontal, MasterSeal 122 is NOT paintable.
sanitary, building, glazing and façade joints in Compatibility with glazing edge seals need to
internal and external areas. be checked individually.
Because it is neutral curing, MasterSeal 122 can For application in swimming pools, refer to
also be used to provide long lasting elastic prescribed method statement.
sealing of movement & construction joint in
concrete, blockwork and brick masonry without
STANDARDS
priming.
Also recommended for curtain wall construction, Conforms to ASTM C920 Type S, Grade NS,
glazing systems, swimming pools, bathrooms, Class 50, Use T2, NT, A, G and M
showers, kitchens and wet rooms having with Meets the requirements of the latest European
anti-fungal property for use in residential, Standard for elastomeric joint sealants
commercial and industrial buildings. EN 15651-1: F-EXT-INT-CC 25LM
EN 15651-2: G-CC 25LM
EN 15651-3: S XS2
ADVANTAGES
Neutral cure, almost odourless. TECHNICAL DATA*
Perfect bond without primer on most
common substrates: saves time and money
Cure mechanism Neutral cure with
High quality silicone: excellent UV, weather atmospheric
and water resistance, elasticity and resilience moisture
and long service life Density 1.02g/ml
Range of colours: standard commonly used Skin formation time (23°C 55% 10 mins
colours available RH)
Rate of cure (23°C 50% RH) 2mm/day
Application temperature +5°C to 40°C
PACKAGING
Application rate (3mm / 6 Bar 130g/min
MasterSeal 122 is supplied in boxes of pressure)
12 x 310ml cartridges. Movement capability ±50%
E-Modulus at 100% 0.35N/mm²
Shore A Hardness (DIN 53505) 16
Ultimate elongation at break 500%
Flow (slump) vertical ISO 7390 <2mm
Shrinkage <5%
Tensile Strength 1N/mm²
Temperature in service -50°C to +120°C
REV C
MasterSeal® 122
APPLICATION Application:
Surface preparation: Fix cartridge into cartridge gun. Cut screw
To ensure optimum adhesion the joint faces must threaded nipple at end of cartridge. Attach
be sound, clean, dry and free from any loosely application nozzle. Cut nozzle at 45° so that
adherent material which could prevent adequate aperture is equal to width of joint. Gun sealant
bond to the substrate. MasterSeal 122 adheres into joint in one smooth continuous operation
perfectly without the use of a primer to most non ensuring sufficient material is delivered to fill
porous substrates. Strongly porous substrates joint. Using a spatula or tooling tool press sealant
may need priming using MasterSeal P 101. It is into joint and onto joint faces while leaving a
good practice to test adhesion before smooth concave surface. Remove any masking
commencing full installation. Protect surrounding tape used.
surfaces with masking tape if they are to be
painted. For swimming pool refer to method CONSUMPTION
statement for application details.
Linear meter / 310ml unit
Joint dimensions:
Correct joint design is essential to ensure correct Joint depth Joint width (mm) approx.
performance of the installed joint sealant (mm) 6 12 20
Minimum joint widths should be 6mm. Up to 6 8.6 4.3 2.6
12mm width depth should equal the width. For all
8 - 3.2 1.9
joints 12mm to 15mm wide it is recommended
that the depth of the installed joint sealant should 10 - - 1.5
be at least 8mm. For joints >15mm the maximum
depth should be half the width. Note: The above coverage rates do not include
wastage
EQUIPMENT CLEANING
Clean uncured material using a solvent such as
xylene or toluene. Cured material can only be
cleaned mechanically (Tip: WD 40 can assist to
remove cured silicones).
Joint depth is controlled by the use of closed cell STORAGE AND SHELF LIFE
backer rod. This also prevents 3 sided adhesion MasterSeal 122 has a shelf life of 12 months
which would be highly detrimental to long term from production date when stored in its original
performance of the joint sealant. packaging at temperatures between 5°C and
25°C.
Corner beads should be a minimum of
6mm x 6mm.
REV C
MasterSeal® 122
HEALTH AND SAFETY NOTE
May produce an allergic reaction. Field service, where provided, does not constitute
Contains: 4,5-DICHLORO-2-OCTYL-2H- supervisory responsibility. For additional
ISOTHIAZOL-3-ONE. sacinformation contact your local BASF
representative.
Avoid contact with the skin, eyes and clothing.
BASF reserves the right to have the true cause of
On skin contact: any difficulty determined by accepted test
Wash thoroughly with soap and water. Under no methods.
circumstances should organic solvent be used. If
irritation develops, seek medical attention. QUALITY AND CARE
All products originating from BASF’s Dubai, UAE
On contact with eyes: facility are manufactured under a management
Wash affected eyes for at least 15 minutes under system independently certified to conform to the
running water with eyelids held open, consult an requirements of the quality, environmental and
eye specialist. occupational health & safety standards ISO 9001,
ISO 14001 and OHSAS 18001.
On ingestion:
Rinse mouth and then drink plenty of water. Do * Properties listed are based on laboratory controlled tests.
not induce vomiting unless told to by a poison ® = Registered trademark of the BASF-Group in many countries.
control center or doctor.
BASF_CC-UAE/Sl_122_05_16/v4/12_17
The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF either
NOTE orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since they, and not
BASF, are responsible for carrying out procedures appropriate to a specific application.